+ Translate

Modified soil strain gage

, : Modified soil strain gage. Journal of the Geotechnical Engineering Division, American Society of Civil Engineers 103(GT7): 789-793

This portable system utilizes an inexpensive, commercially available metal detector, based on a beat-frequency oscillator type electronic circuit.

(PDF 0-2 workdays service)

Accession: 000434070

Submit PDF Full Text: Here

Submit PDF Full Text

No spam - Every submission is manually reviewed

Due to poor quality, we do not accept files from Researchgate

Submitted PDF Full Texts will always be free for everyone
(We only charge for PDFs that we need to acquire)

Select a PDF file:

Related references

Sutfin, D.C.; Lefer, A.S., 1963: A modified strain gage arch for measurement of heart contractile force. The strain gage arch described by Boniface et al. (1953) for the determination of heart contractile force has been modified to reduce size, improve insulation, and provide temperature compensation. The techniques for constructing this gage are des...

Truesdale William B.; Schwab Ronald B., 1968: Soil strain gage instrumentation. Soil strain gage instrumentation was developed for the measurement of static and dynamic strains in soil both for laboratory and field applications. The strain sensor consists of two mechanically uncoupled flat-coil disks which are embedded in the...

Erbach, D.; Kinney, G.; Wilcox, A.; Abo-Abda, A., 1991: Strain gage to measure soil compaction. A soil-strain gage for measuring compaction of soil subjected to a vehicle load is described. The transducer uses a rectilinear potentiometer to measure soil strain. Soil deformation can be measured at several locations in the soil profile to quan...

Erbach, D.C., 1987: Strain gage to measure soil compaction. An instrument to measure compaction of soil subjected to a vehicle load is described. The device uses a linear motion potentiometer to measure soil strain. The max. strains in the 5-30 cm layer were approx. 13 and 17% for the front and rear wheels...

Cooper, A.W.; Vanden Berg, G.E.; Mccolly, H.F.; E.A.., 1957: Strain gage cell measures soil pressure. The pressure cell reported will measure pressure with reasonable accuracy when suspended in a homogeneous soil mass. According to calculations using Froehlich's formula, deep soil compaction is a function of the total load applied to the surf...

Selig Ernest T.; H.J.ckson, 1971: Retaining wall experiment to evaluate soil strain gage. Journal of the Soil Mechanics and Foundations Division 97(6): 953-957

Safaqah, O.A.; Riemer, M.F., 2007: The elastomer gage for local strain measurement in monotonic and cyclic soil testing. This study introduces a new type of local strain gages for soil testing called the elastomer gage. It is the first on-sample local strain gage that is flexible enough to be attached to the inside of a conventional latex membrane so that the gage i...

Yanagisawa Michio, 1987: Crustal strain measurements using resistive strain gage; Part III, Comparison of observation results between strain gages and extensometers. Sokuchi Gakkaishi = Journal of the Geodetic Society of Japan 33(3): 245-256

da Fonseca, J.C.; da Silva, O.L., 1975: Measurements of stress and strain in live bone by electrical strain gage method. Measurements of stress and strain in parts of musculokeletal system has been extensively studied in recent years. "In vitro" tests have contributed important information. The present study is an attempt to assess "in vivo" meas...

Okazaki, H., 1970: Confidence in strain value measured with resistance strain gage. In a study on several timber species, the comparative reliability of strain values measured by bonded-type paper-based resistance strain gauges and by Martens' mirror apparatus was assessed for short wooden columns and simple beams subjected...