EurekaMag.com logo
+ Site Statistics
References:
53,869,633
Abstracts:
29,686,251
+ Search Articles
+ Subscribe to Site Feeds
EurekaMag Most Shared ContentMost Shared
EurekaMag PDF Full Text ContentPDF Full Text
+ PDF Full Text
Request PDF Full TextRequest PDF Full Text
+ Follow Us
Follow on FacebookFollow on Facebook
Follow on TwitterFollow on Twitter
Follow on LinkedInFollow on LinkedIn

+ Translate

Cutting forces of knife edges into wood III. Changes in wave patterns of cutting force with increases in the depth of cut



Cutting forces of knife edges into wood III. Changes in wave patterns of cutting force with increases in the depth of cut



Mokuzai Gakkaishi = Journal of the Japan Wood Research Society 32(12): 958-964



The cutting force at cutting angles of 0-90 degrees was measured using 6 types of small knife; changes in the wave patterns of the cutting force with increases in the depth of cut on radial and tangential surfaces of wood are discussed. (With English captions.).

(PDF emailed within 1 workday: $29.90)

Accession: 001790851

Download citation: RISBibTeXText



Related references

The specific cutting force as a function of the blunting of knife edges in rotary cutting.. Holztechnologie, Dresden. 4: 2, 158-62, 1963

Cutting ability of knife with planer. I. Relationship between condition of wood and cutting force. Mokuzai Gakkaishi Journal of the Japan Wood Research Society 18(5): 223-229, 1972

Knife sharpness-cutting force & cutting force-hand grip evaluations for meat cutting. 1994

Relationship between cutting force and depth of tooth insertion in wood during branch cutting operations. 1971

Studies on vibration cutting of wood. III. Cutting forces in lateral vibration cutting. IV. The effect of fibre direction and annual ring on vibration cutting forces. Mokuzai Gakkaishi Journal of the Japan Wood Research Society 20(9): 418-423, 424-429, 1974

Studies on mechanism of orthogonal cutting of wood with Japanese plane. I. Effects of distance between knife edge and cap iron edge and depth of cut on surface quality in cutting against the grain. Mokuzai Gakkaishi Journal of the Japan Wood Research Society 23(2): 82-88, 1977

An analysis of cutting work in peripheral milling of wood. III. Variation of cutting force in inside cutting of wood with router-bit. IV. The power requirement in inside cutting of wood with router-bit. J. Jap. Wood Res. Soc, 17: 10, 437-48, 1971

Study on the oblique cutting of wood - the relations between cutting forces and bevel angles of cutting egde. Journal of North East Forestry University, China 15(4): 47-55, 1987

Wood cutting with a pendulum dynamometer. VI. Relation among cutting energy, cutting force and type of chip formation. Wood Res., Kyoto. 39, 1-12, 1966

Studies on wood grinding with coated abrasive belts. III. Cutting force in cutting process using a simulated cutting edge. Mokuzai Gakkaishi Journal of the Japan Wood Research Society 22(6): 337-342, 1976

Fundamental studies on low-frequency cutting of wood. IV. Relation between effective rake angle and cutting force in lateral vibratory cutting. Mokuzai Gakkaishi Journal of the Japan Wood Research Society 18(8): 387-392, 1972

Effects of sliding velocity and inclination angle on the cutting force in veneer slicing by feeding the knife to the workpiece during the sliding of the knife in the direction parallel to the cutting edge. Mokuzai Gakkaishi Journal of the Japan Wood Research Society 32(9): 677-684, 1986

Cutting moments and grip forces in meat cutting operations and the effect of knife sharpness. Applied Ergonomics 34(4): 375-382, 2003

Veneer cutting of softwoods IV. Influence of varied depths of cuts, cutting directions to pith and shapes of knife edges on the veneer quality. Mokuzai Gakkaishi = Journal of the Japan Wood Research Society 39(9): 1005-1011, 1993

Cutting forces in bandsaw processing of oak and beech wood as affected by wood moisture content and cutting directions. European Journal of Wood and Wood Products 71(6): 747-754, 2013