+ Translate

Batch drying of shelled corn in two-dimensional spouted beds with draft plates

, : Batch drying of shelled corn in two-dimensional spouted beds with draft plates. Drying Technology 11(2): 339-354

Geometrically similar spouted beds with draught plates were used to obtain the drying characteristics of freshly harvested shelled maize with 0.28 to 0.31 kg/kg initial m.c. at different air inlet temp. and bed heights.

Accession: 002308515

DOI: 10.1080/07373939308916823

Download PDF Full Text: Batch drying of shelled corn in two-dimensional spouted beds with draft plates

Submit PDF Full Text

No spam - Every submission is manually reviewed

Due to poor quality, we do not accept files from Researchgate

Submitted PDF Full Texts will always be free for everyone
(We only charge for PDFs that we need to acquire)

Select a PDF file:

Related references

Kalwar, M.I.; Raghavan, G.S.V.; Mujumdar, A.S.; Norris, E.R., 1988: Two-dimensional spouted beds of shelled corn with draft plates. Experiments were performed in a slotted two-dimensional spouted bed grain drier built from plexiglass to study the aerodynamic characteristics and solid circulation rates of shelled maize beds while varying slant angle, spout width, and separation...

Tulasidas, T.N.; Kudra, T.; Raghavan, G.S.V.; Mujumdar, A.S., 1992: Effect of bed-height on drying of shelled corn in a two-dimensional spouted bed equipped with draft plates. Drying kinetics of shelled maize were studied in a laboratory-scale 2-dimensional spouted bed drier with draught plates at an air temp. of 80 degrees C. Drying rate was found to decrease with bed height. This relationship is interpreted in terms o...

Kalwar, M.I.; Raghavan, G.S.V.; Mujumdar, A.B.; Fanous, M.A., 1988: Aerodynamics of grains in a large scale two-dimensional spouted bed with draft plates. Cereal grains were spouted in a slotted 2-dimensional spouted bed apparatus with 2 draft plates in min. spouting conditions. Separation distance, spout width and slant angle were manipulated in such a way as to establish their effects on spouting...

Madhiyanon, T.; Soponronnarit, S.; Tia, W., 2001: A two-region mathematical model for batch drying of grains in a two-dimensional spouted bed. A two-region non-equilibrium model of a two-dimensional spouted bed drier has been developed. The model, based on heat and mass transfer interactions between the spout and downcomer regions, predicts the air and grain temperatures and moisture con...

Chittenden, David Henry, 1961: Drying of single kernels and deep beds of shelled corn. Dissertation Absts 22(2): 511-512

Ladeira, J.F.M.; Passos, M.L.A., 2002: Simulation of the fluid flow in spouted beds with draft-tube. To describe the drying of any material in convective driers, it is important to model the fluid flow. The aim of this work was to simulate the fluid flow in spouted bed driers with a draft tube to determine the pressure drop and the fluid flow fie...

Liu WeiMin; Chen Jian; X.S.engYan; Zuo MinLong, 2003: Technology optimization of drying wheat by spouted bed with draft tube. To spread the use of spouted bed in China, which has good effect on heat and mass transfer, a spouted bed grain drier was designed and fabricated to study its effect on drying grains. The structural parameters were as follows: inner diameter 180 m...

Alves Filho, O., 1986: Continuous and batch spouted bed drying of coffee berries. An experimental drier was constructed and tested. The pressure drop was recorded as a function of flow rate and average velocity, and the moisture content of both the wet product and dried berries was plotted as a function of drying time. Results...

Anonymous, 2008: Experimental study on drying of rapeseed in a spouted bed with rotating draft tube

Weiland, R.; Low, G.L.ung, L., 1974: The drying of raw sugar in fluidised and spouted beds. Proceedings of the congress: 5th (v 3) 1561-1567