A study on the automatic control and regulation system of drying process of the three-pass dryers for wood chip
Wang, Z.T.
Wood Industry Beijing 7(2): 23-28, 50
1993
Accession: 002556115
Process control and monitoring equipment are described for the 'three-pass drier' which is shown to have good thermal efficiency and result in uniform chip moisture content.
PDF emailed within 1 workday: $29.90
Related References
Smirnov, A.A. 1977: Static mathematical model of the heater of a wood-drying kiln for the automatic control system of the wood drying process Lesnoi Zhurnal 3: 128-133Deliiski, N. 2003: Microprocessor system for automatic control of the drying medium temperature and humidity in dryers for veneer Annals of Warsaw Agricultural University, Forestry and Wood Technology 53: 37-41
Chrusciel, L.; Mougel, E.; Zoulalian, A. 2000: A new air dehydration process for wood dryers: Part I. Kinetic and quality of drying Holzforschung 54(2): 201-206
Schechtow, C. 1970: Possible uses for the measurement alternator 2339 and 2403 (Feutron-Greiz) for measuring wood moisture as well as in the automatic regulation of the drying process for timber Holzindustrie 23 (1) 6-9
Prokkola, H.; Kuokkanen, M.; Kuokkanen, T.; Lassi, U. 2014: Chemical Study of Wood Chip Drying: Biodegradation of Organic Pollutants in Condensate Waters from the Drying Process Bioresources 9(3): 3761-3778
Kitayama, S.; Noguchi, M.; Satoyoshi, K. 1985: Automatic control system of drying zerkova wood by acoustic emission monitoring Acoustics Letters 9(4): 45-48
Aniskin, V.I.; Lysy, V.A. 1979: Synthesis of the automatic control system for the tobacco drying process Trudy VIM 83: 60-68
Glebashev, S.A.; Kosarin, A.A. 1994: System for control and automatic regulation of lumber drying schedules Derevoobrabatyvayushchaya Promyshlennost' 6: 8-9
Liu, Q.B.kker-Arkema, F. 2001: Automatic control of crossflow grain dryers. 1. Development of a process model Journal of agricultural engineering research 80(1): 81-86
Douglas, P.L.; Sullivan, G.R. 1994: Automatic moisture control of process dryers in the agriculture and food industries Drying 94 Proceedings of the 9th International Drying Symposium, Gold Coast, Australia, 1-4 August 1994: Volume A: 327-334
Isaka, S. 1977: Automatic control of wood drying schedule by drying stress. 2 Wood industry 32(2): 58-60
Isaka, S. 1977: Automatic control of wood drying schedule by drying stress. 1 Wood industry 32(1): 8-11
Liu, Q.; Bakker Arkema, F.W. 2001: Automatic control of crossflow grain dryers, part 1: development of a process model Journal of Agricultural Engineering Research 80(1): 6
Renstrom, R. 2006: The potential of improvements in the energy systems of sawmills when coupled dryers are used for drying of wood fuels and wood products Biomass and Bioenergy 30(5): 452-460
Jaros, M. 1997: Usability of mathematical models of vegetable convection drying for automatic control of drying process Inzynieria Rolnicza 1(1): 147-153
Kulik, T. 1976: A method for analysis of the drying process parameters effect upon the average drying rate of forages in drum dryers Biuletyn prac naukowo badawczych: ub 1976), 18 85-107
Schuster, W. 1985: Burning of wood sanding dust for heating of chip dryers Holztechnologie 26(1): 7-9
Fyhr, C.; Rasmuson, A. 1997: Steam drying of wood chips in pneumatic conveying dryers Drying Technology 15(6/8): 1775-1785
McGuire, P. 1984: Economic aspects of substituting oil furnaces for grain dryers with wood chip firing systems Bioenergy 84 Proceedings of conference 15-21 June 1984, Goteborg, Sweden Vol IV Bioenergy utilization: 131-132
Perng, W.R.; Tajima, T. 1969: Influence of drying on chemical properties of wood. II. Effect of wood drying on pulps prepared from different anatomical features of wood (early wood-late wood, core wood-outer wood) J. Jap. Wood Res. Soc 15(8): 325-30