EurekaMag.com logo
+ Translate

Bending induced fracture of plastic soils


, : Bending induced fracture of plastic soils. Transactions of the Chinese Society of Agricultural Engineering 13(1): 30-34

Loading plastic soils into bending is an effective method of causing soil fracture with both minimum force and energy requirements. The bending fracture is achieved by using a rotating cutting blade and a reaction plate about which the bending is induced.

(PDF 0-2 workdays service)

Accession: 002763783

Submit PDF Full Text: Here


Submit PDF Full Text

No spam - Every submission is manually reviewed

Due to poor quality, we do not accept files from Researchgate

Submitted PDF Full Texts will always be free for everyone
(We only charge for PDFs that we need to acquire)

Select a PDF file:
Close
Close

Related references

Ou, Y.; Godwin, R.J., 1992: Bending fracture of plastic soils and forces prediction model. A series of studies to investigate methods of breaking up wet plastic soils was undertaken. It was found that bending is an effective method of causing soil fracture with min. force and energy requirements. This is best achieved by using a rotatin...

Moreno-Maroto, Jé.Manuel.; Alonso-Azcárate, J., 2016: A Bending Test for Determining the Atterberg Plastic Limit in Soils. The thread rolling test is the most commonly used method to determine the plastic limit (PL) in soils. It has been widely criticized, because a considerable subjective judgment from the operator that carries out the test is involved during its per...

Kollmannsperger, P., 1979: Bending resistance and bending module of 2 photopolymerizing plastic filling materials. Bending tests corresponding to the German Industrial Norm 13,922 for plastic filling material were carried out with ultraviolet polymerized Nuva-Fil P.A. and photopolymerized Fotofil. The photopolymerized Fotofil fulfilled the German Industrial No...

Kovacević, M.S.; Nikezić, D., 2006: Influence of bending on power distribution in step-index plastic optical fibers and the calculation of bending loss. A means of calculating optical power distribution in bent multimode optical fibers is proposed. It employs the power-flow equation approximated by the Fokker-Planck equation that is solved by the explicit finite-difference method. Conceptually imp...

Djordjevich, A., 2007: Comment on "Influence of bending on power distribution in step-index plastic optical fibers and the calculation of bending loss". Arguments are presented that a recent paper on the topic of power distribution and mode coupling in curved step-index plastic optical fibers is incorrect and that the method proposed is conceptually flawed except for the special case when the fibe...

Kurbjuhn, W.; Lippert, H., 1973: Metacarpal bones and proximal phalanges in impact fracture and bending fracture test. II. Fracture patterns. Zeitschrift für Orthopadie und Ihre Grenzgebiete 111(1): 78-83

Sumiya, K.; Sugihara, H., 1961: On the fluctuation of bending strength and delay of fracture in bending of wood.. Presents results of tests made to determine the bending creep fracture (b.c.f.) and bending strength (b.s.) of Chamaecyparis obtusa and Fagus crenata subjected to a constant loading rate of 200 kg./ sq. cm./min. Variance analyses of the test resul...

Narasimha Rao S.; Murthy T.V.B.S.S.; Veeresh C., 1994: Induced bending moments in batter piles in settling soils. Soils and Foundations 34(1): 127-133

Balastreire, L.; Herum, F.; Blaisdell, J., 1982: Fracture of corn endosperm in bending. II. Fracture analysis by fractography and optical microscopy. Transactions of the ASAE American Society of Agricultural Engineers 25(4): 1057-1061

Balastreire, L.A.; Herum, F.L.; Blaisdell, J.L., 1982: Fracture of corn endosperm in bending. Part 2: Fracture analysis by fractography and optical microscopy. Fractured samples of maize endosperm are studied using electron fractography and optical microscopy to study the mechanisms and mode of crack propagation. The mode of crack propagation is not affected by temperature and rate of loading. The fractu...