EurekaMag.com logo
+ Site Statistics
References:
47,893,527
Abstracts:
28,296,643
+ Search Articles
+ Subscribe to Site Feeds
EurekaMag Most Shared ContentMost Shared
EurekaMag PDF Full Text ContentPDF Full Text
+ PDF Full Text
Request PDF Full TextRequest PDF Full Text
+ Follow Us
Follow on FacebookFollow on Facebook
Follow on TwitterFollow on Twitter
Follow on Google+Follow on Google+
Follow on LinkedInFollow on LinkedIn

+ Translate

Development of the dehulling principle for a serradella dehuller






Journal of Agricultural Engineering Research 63(1): 1-8

Development of the dehulling principle for a serradella dehuller

Serradella (Ornithopus compressus Avila) seed and pod segments have a germination rate of <10%, unless the husks are removed and the naked seed scarified, when the germination rate increases to 85%. The development of the prototype of a machine to thresh the seed is described.

Accession: 002800157

DOI: 10.1006/jaer.1996.0001

Download PDF Full Text: Development of the dehulling principle for a serradella dehuller



Related references

Sanders, K.F., 1996: A dehuller for improving the germination of serradella seed. The design and operation of this commercial-scale dehuller are explained. The performance of the equipment was evaluated and it was shown to dehull serradella [Ornithopus] cv. Avila at a rate of 978 kg/h with a p.t.o. power requirement of 7.7 kW....

Kittlitz, E. von; Vetterer, H., 1972: Studies on the mechanical dehulling of oats with a compressed-air dehuller. Details are given of the performance of an apparatus which can be used for the rapid determination of the hull percentage in varietal samples.

Ishitani, E., 1987: Dehulling of sunflower seed with an impact type dehuller: (1) performance test. Non-oil sunflower seeds were dehulled with an impact type rice huller. The flow of hulls and kernels was disrupted at the outlet of the separating device because of the smaller angle of inclination of the flowing pans. All other parts worked well...

Thakor, N.J.; Sokhansanj, S., 1998: Optimization of machine parameters for dehulling of oilseed with lab scale abrasive dehuller. A tangential abrasive dehulling device was developed for processing rapeseed for animal feeds. Experiments were conducted with 3 abrasive discs (50, 80 and 120 grits), 3 samples sizes (15, 20 and 25 g), and 3 dehulling times (30, 60 and 90 seconds...

Karlovic, D.; Dimic, E.; Turkulov, J.; Skoric, D., 1992: Dehulling efficiency of sunflower hybrids Gricko, Olivko and NS-H-45 with the laboratory air-jet impact dehuller. Seeds of 2 sunflower hybrids with high and varying fatty acid composition (Olivko and NS-H45) and confectionery type Gricko were dehulled using a laboratory pneumatic machine. Seed moisture content and dehuller air pressure were varied throughout...

Karlovic, D.; Dimic, E.; Turkulov, J.; Skoric, D.; Stanojevic, D., 1992: Influence of moisture content and air pressure on the dehulling efficiency of sunflower hybrid Kolos on the laboratory air-jet impact dehuller. Seeds were dehulled using a laboratory pneumatic machine. Seed moisture content and dehuller air pressure were varied during the experiment. Seed moisture, oil and protein contents as well as physical characteristics were determined after dehullin...

Nutt, B., 1994: Recent success with dehulling serradella pods. A prototype mechanical sheller was designed and constructed to shell podded yellow serradella (Ornithopus compressus) seeds to improve germination. It used 2 conical plates which rotated in the same direction, but at different speeds. The top plat...

Patil R.T.; Singh J.; Bargale P.C., 1991: Development of wet dehuller for blanched soybean. To remove hulls from blanched whole soybean, a unit based on the principle of rubbing and floatation was designed and fabricated. It is a batch type unit where hulls are removed from cotyledons by friction between two surfaces of wiremesh in the p...

Reddy,B.S.; Maruthi,V., 2008: Development of a prototype dehuller for pretreated chickpea. A prototype machine was developed for dehulling of pretreated pulse grain. The dehulling unit consists of an abrasive roller and a stationery concentric perforated mesh drum over it. The separation of hull and splitting of chickpea grain was effec...

Caldwell, A.H.; Sokhansanj, S.; Hucl, P.; Abdel Aal, E.S.M.; Crerar, W.J., 1998: Development of a cone-type dehuller for canaryseed. Canaryseed (Phalaris canariensis L.), traditionally marketed as bird feed, is now being considered for human consumption based on the development of a new hairless cultivar, CDC Maria. The development of processing technology, primarily dehulling,...