+ Site Statistics
References:
54,258,434
Abstracts:
29,560,870
PMIDs:
28,072,757
+ Search Articles
+ Subscribe to Site Feeds
Most Shared
PDF Full Text
+ PDF Full Text
Request PDF Full Text
+ Follow Us
Follow on Facebook
Follow on Twitter
Follow on LinkedIn
+ Translate
+ Recently Requested

Numerical modelling of steam injection in a vertical sand-filled column



Numerical modelling of steam injection in a vertical sand-filled column



Proceedings of theme C groundwater: an endangered resource 27th Congress of the International Association for Hydraulic Research, San Francisco, California, USA, 10-15 August 1997: 107-112



Thermally enhanced soil vapour extraction (TUBA) is a technique under development for the remediation of organic contaminants in the vadose zone. However, for the remediation of low volatile non aqueous phase liquids (NAPLs), this method is inefficient. The method also does not work for NAPL contaminated clay lenses because the air flows around the lens.

(PDF emailed within 1 workday: $29.90)

Accession: 003215558

Download citation: RISBibTeXText


Related references

Two-dimensional numerical simulation of thermo-gravitational convection in a vertical porous column filled with a binary fluid mixture. International Journal of Thermal Sciences 43(11): 1057-1065, 2004

Fully Coupled Numerical Modelling of Ground Surface Uplift in Steam Injection. Journal of Canadian Petroleum Technology 49(01): 16-21, 2010

Numerical modelling of transient cyclic vertical loading of suction caissons in sand. GĂ©otechnique 66(2): 121-136, 2016

Numerical Modelling of Geomechanical Response of Sandy-Shale Formation in Oil Sands Reservoir During Steam Injection. Journal of Canadian Petroleum Technology 49(1): 23-28, 2010

Numerical modelling of prefabricated vertical drains and surcharge on reinforced floating column-supported embankment behaviour. Geotextiles and Geomembranes 43(6): 493-505, 2015

Gas injection tests on sand/bentonite mixtures in the laboratory; experimental results and numerical modelling. Physics and Chemistry of the Earth 33.Suppl. 1: S237-S247, 2008

Infiltration into a uniform sand column with a central, small and cylindrical space filled with a coarser sand. Bulletin of the Disaster Prevention Research Institute 37, Part 3: 107-145, 1987

Pressure falloff analysis for steam injection wells in a low-permeability reservoir with steam-induced vertical fractures. SPE - Society of Petroleum Engineers of AIME 64: 187-202, 1989

Steam injection device for a vertical steam conditioner. Official Gazette of the United States Patent & Trademark Office Patents 1180(4): 2214, Nov 28, 1995

Numerical modeling of steam injection for the removal of nonaqueous phase liquids from the subsurface; 1, Numerical formulation. Water Resources Research 28(2): 433, 1992

Steam and air co-injection in removing TCE in 2D-sand box. Huan Jing Ke Xue= Huanjing Kexue 35(7): 2785-2790, 2015

Enhanced rate of gas hydrate formation in a fixed bed column filled with sand compared to a stirred vessel. Chemical Engineering Science 68(1): 617-623, 2012

Air and water flows in a vertical sand column. Water Resources Research 47.4, 2011

Numerical modeling of steam condensation in vertical channel in presence of noncondensable gas. International Journal of Thermal Sciences 126: 263-271, 2018

Steam-assisted gravity drainage in oil sand reservoirs using a combination of vertical and horizontal wells. Fuel 74(8): 1180-1184, 1995