EurekaMag.com logo
+ Translate

Preparation of polysulfon hollow fiber membrane filters and their structural and permselective characteristics


, : Preparation of polysulfon hollow fiber membrane filters and their structural and permselective characteristics. Membrane 11(6): 355-362

The polysulfon hollow fiber membrane filters were prepared by the phase inversion method. The membrane preparing solution having the phase inversion or transition temperature, below which a uniform solution changed into two separated phases, and the core solution having both comparatively mild coagulating effect and the lower temperature than the transition temperature were extruded simultaneously from a double ring nozzle. The membrane preparing solution was estimated to complete coagulation almost entirely before being introduced into the outer side coagulating liquid. The hollow fiber membrane filter prepared as mentioned above had circular pores in the outer surface and the uniform network structure in the cross section, but irregularly shaped pores in the inner surface. The observable maximum pore diameter in the inner surface was defined and utilized as the characteristic parameter of the membrane filter, which correlated quantitatively to permeabilities of uniform latex particles, permeabilities of the bovine serum proteins and bubbling points.

(PDF 0-2 workdays service)

Accession: 006173699

Submit PDF Full Text: Here


Submit PDF Full Text

No spam - Every submission is manually reviewed

Due to poor quality, we do not accept files from Researchgate

Submitted PDF Full Texts will always be free for everyone
(We only charge for PDFs that we need to acquire)

Select a PDF file:
Close
Close

Related references

Yamashita, S.; Mochizuki, A.; Nakazaki, T.; Seita, Y.; Sawamoto, J.; Endo, F.; Yui, N.; Ogata, N.; Kataoka, K.; Okano, T.; Sakurai, Y., 1996: A new blood compatible and permselective hollow fiber membrane for hemodialysis. The authors have prepared a blood compatible and highly permselective hemodialysis membrane composed of polyether segmented nylon. This block copolymer was synthesized by polycondensation of bis-3-aminopropyl-poly(tetramethylene oxide) (PTMO) and...

Kayashima, K.; Sueoka, A.; Smith, J.W.; Matsubara, S.; Abe, Y.; Ueno, M.; Shinagawa, S.; Katsume, C.; Malchesky, P.S.; Nosé, Y., 1982: Development of new hollow fiber membrane macromolecular filters. Newly developed hollow fiber membrane filters made of ethylene-vinyl-alcohol designated as EVAL 2A, EVAL 4A, and EVAL 5A, were tested in vitro and applied clinically. EVAL 2A had the lowest molecular weight cut-off (30% rejection rate for 10(4) da...

Gupta, B.B.; Jaffrin, M.Y.; Ding, L.H.; Dohi, T., 1986: Membrane plasma separation through small-area, hollow-fiber filters. The filtration capabilities of small polypropylene hollow-fiber plasma filters with membrane areas ranging from 100 to 1,000 cm2 have been investigated. It is found that the filtration flux per unit membrane area is approximately proportional to t...

Dogal, N.M.; Mathis, R.K.; Lin, J.; Qiu, F.; Kunselman, A.; Undar, A., 2012: Evaluation of three hollow-fiber membrane oxygenators without integrated arterial filters for neonatal cardiopulmonary bypass. The cardiopulmonary bypass (CPB) procedure has been shown to be a possible cause of postoperative neurological morbidity for various reasons, including: large amounts of gaseous microemboli (GME) reaching the patient and hypoperfusion of the patie...

Euler H H.; Gutschmidt H.J.; Herrlinger J.D.; Kokenge F.; Loffler H., 1981: Elimination characteristics of high concentrated immuno globulin m by hollow fiber plasmapheresis filters. Artificial Organs 5(2): 195

Dellanna, F.; Baldamus, C.A., 1996: Beta-2 Microglobulin clearance is optimized by a dialyzer with a new polysulfon membrane and small fiber diameter. Journal of the American Society of Nephrology 7(9): 1477

Zhao, C.; Yan, Y.; Hou, D.; Luan, Z.; Jia, Z., 2012: Preparation of high concentration polyaluminum chloride by chemical synthesis-membrane distillation method with self-made hollow fiber membrane. A method of direct contact membrane distillation (DCMD) with a self-made hollow polyvinylidene fluoride membrane was applied to prepare high concentration polyaluminum chloride (PACl) with high A1b content based on chemical synthesis. The permeate...

Hughes, J.A.; Jay, M., 1995: Preparation of [11C]formaldehyde using a hollow fiber membrane bioreactor. A bioreactor consisting of the enzymes alcohol oxidase and catalase immobilized onto a hollow fiber membrane was used to convert [11C]methanol to [11C]formaldehyde. Using an alcohol oxidase:catalase ratio of 1:500 U, conversion yields of 90-95% we...

Hughes, J., A.; Jay, M., 1995: Preparation of (11C)formaldehyde using a hollow fiber membrane bioreactor. A bioreactor consisting of the enzymes alcohol oxidase and catalase immobilized onto a hollow fiber membrane was used to convert (11C)methanol to (11C)formaldehyde. Using an alcohol oxidase:catalase ratio of 1: 500 U, conversion yields of 90-95% w...

Saruhashi, M.; Sasaki, M., 2002: Manufacturing method of artificial organ, hollow fiber, and dialyzer of hollow fiber membrane type. A manufacturing method of an artificial organ formed of a material having a solubility parameter delta of not more than 13 (cal/cm3)1/2 involves filling micropores of the body fluid treatment membrane with a filling solution having no or little so...