+ Site Statistics
References:
54,258,434
Abstracts:
29,560,870
PMIDs:
28,072,757
+ Search Articles
+ Subscribe to Site Feeds
Most Shared
PDF Full Text
+ PDF Full Text
Request PDF Full Text
+ Follow Us
Follow on Facebook
Follow on Twitter
Follow on LinkedIn
+ Translate
+ Recently Requested

The effect of a stiffener on the maximum load of flat plywood plates in edgewise compression, with the face grain at 0 degrees and 90 degrees to the load: a single stiffener parallel to the direction of loading, load edges simply clamped, others simply supported



The effect of a stiffener on the maximum load of flat plywood plates in edgewise compression, with the face grain at 0 degrees and 90 degrees to the load: a single stiffener parallel to the direction of loading, load edges simply clamped, others simply supported



Rep. U.S. For. Prod. Lab., Madison. 1553-D, 7



When flat plywood plates subjected to edgewise compression are stiffened by a centrally located stiffener parallel to the load, the increase in the ultimate load of the plate is related to the size of the stiffener.

(PDF emailed within 1 workday: $29.90)

Accession: 013869456

Download citation: RISBibTeXText


Related references

Supplement to buckling of stiffened, flat, plywood plates in compression. A single stiffener perpendicular to stress; face grain of plywood at 45 degrees to its edges. Rep. U.S. For. Prod. Lab., Madison. 1553-A, 9, 1946

Buckling of rectangular sandwich plates subjected to edgewise compression with loaded edges simply supported and unloaded edges clamped. 1952

Buckling of stiffened flat plywood plates in compression. A single stiffener parallel to stress. Rep. U.S. For. Prod. Lab., Madison. 1553-B, 28, 1947

Studies on the wooden plates. 1. Deflection of rectangular plates under a concetrated load at the centre, edges simply supported. Res. Bull. Exp. For. Hokkaido Univ, 25: 1, 61-84, 1967

Buckling of stiffened, flat, plywood plates in compression. A single stiffener perpendicular to stress. Rep. U.S. For. Prod. Lab., Madison. 1553, 18, 1946

Buckling loads of flat sandwich panels in compression. B. Buckling of flat sandwich panels with loaded edges simply supported and the reamining edges clamped. C. Buckling of flat sandwich panels remaining edges simply supported. D. Buckling of flat sandwich panels with. Rep. U.S. For. Prod. Lab., Madison. 1525 B; 1525 C; 1525 D, 12 ; 6 ; 6, 1947

Accurate bending analysis of rectangular plates with two adjacent edges free and the others clamped or simply supported based on new symplectic approach. Applied Mathematical Modelling 34(4): 856-865, 2010

Computer supported development of a numerical method for calculating nonlinear load-settlement lines of shallow foundations and loading plates with a uniform distributed load. Pages 1007-1016 1979, 1979

On the effect of uniform surface load upon the plastic yielding of simply supported beams. Journal of the Mechanics and Physics of Solids 10(2): 151-163, 1962

Buckling loads of flat sandwich panels in compression. The buckling of flat sandwich panels with edges simply supported (End grain Balsa cores and facings of aluminium and glass cloth laminate). Rep. U.S. For. Prod. Lab., Madison. 1525-A, 26, 1947

On the diffusion of load from a stiffener into an infinite wedge-shaped plate. Flow, Turbulence and Combustion 15(1): 429-439, 1965

Ultimate load design of simply-supported slab-beam systems. Building Science 4(3): 145-150, 1969

Optimal design of simply supported columns subject to distributed axial load and stress constraint. Optimal Control Applications and Methods 30(5): 505-520, 2009

Diluting the burden of load: perceptual load effects are simply dilution effects. Journal of Experimental Psychology. Human Perception and Performance 36(6): 1645-1656, 2011

The effective stiffness of a stiffener attached to a flat plywood plate. Rep. U.S. For. Prod. Lab., Madison. 1557, 28, 1946