Automatic control of wood drying schedule by drying stress. 1
Isaka, S.
Wood industry 32(1): 8-11
1977
Accession: 015102396
PDF emailed within 1 workday: $29.90
Related References
Isaka, S. 1977: Automatic control of wood drying schedule by drying stress. 2 Wood industry 32(2): 58-60Smirnov, A.A. 1977: Static mathematical model of the heater of a wood-drying kiln for the automatic control system of the wood drying process Lesnoi Zhurnal 3: 128-133
Perng, W.R.; Tajima, T. 1969: Influence of drying on chemical properties of wood. II. Effect of wood drying on pulps prepared from different anatomical features of wood (early wood-late wood, core wood-outer wood) J. Jap. Wood Res. Soc 15(8): 325-30
Pearson, H.; Carrington, G. 2002: Wood drying. Water-spray stress relief after dehumidification drying Wood Processing Newsletter 31: 4-5
Fujita, S. 1975: Studies on the drying check. IX. The shrinkage stress and deformation of structural layer of wood during drying Mokuzai Gakkaishi Journal of the Japan Wood Research Society 21(4): 231-236
Zhang JianFeng; Gu JiYou; Ai Muye 2005: Transverse drying stress of white birch wood during drying Journal of Northeast Forestry University 33(4): 25-28
Pisano, R. 2020: Automatic control of a freeze-drying process: Detection of the end point of primary drying Drying Technology: 1-18
Zhuromskii, V.M.; Zhuromskii, M.V.; Tkachenko, A.V. 1997: Automatic control of the parameters of the drying agent in commercial lumber drying without auto-oscillations Derevoobrabatyvayushchaya Promyshlennost' 3: 26-27
Jaros, M. 1997: Usability of mathematical models of vegetable convection drying for automatic control of drying process Inzynieria Rolnicza 1(1): 147-153
Jai SyYung; Hsiung JuChen 1996: Effects of fan speed on drying rate, drying quality and power consumption during kiln drying of wood Taiwan Journal of Forest Science 11(2): 209-214
Rosen, H.N. 1978: Evaluation of drying times, drying rates, and evaporative fluxes when drying wood with impinging jets Proceedings of first international symposium on drying, McGill University, Montreal, Canada, August 3-5, 1978: 192-200
Kawabe, J.; Mori, M. 1984: Vacuum drying of wood with high frequency heating. (I) On the drying rate, compared with kiln drying Bulletin of the Kyushu University Forests 54: 125-135
Jai SyYung; Hsiung JuChen 1997: Effects of fan speed on drying rate, drying quality, and power consumption during kiln drying of wood (2) Taiwan Journal of Forest Science 12(2): 223-228
Han, Y.; Yang, S.; Park, J.; Chang, Y.; Eom, C.; Yeo, H. 2017: Separation of drying strains and the calculation of drying stresses considering the viscoelasticity of red pine wood during drying Drying Technology 35(15): 1858-1866
Myllymaa, T.; Holmberg, H.; Hillamo, H.; Laajalehto, T.; Ahtila, P. 2014: Wood Chip Drying in Fixed Beds: Drying Kinetics and Economics of Drying at a Municipal Combined Heat and Power Plant Site Drying Technology 33(2): 205-215
Mottonen, V. 2006: Variation in drying behavior and final moisture content of wood during conventional low temperature drying and vacuum drying of Betula pendula timber Drying Technology 24(10/12): 1405-1413
Chen, P.Y.S. 1978: Press-drying black walnut wood: continuous drying vs. step-drying Forest Products Journal 28(1): 23-25
Korpa, A.; Trettin, R. 2006: The influence of different drying methods on cement paste microstructures as reflected by gas adsorption : Comparison between freeze-drying (F-drying), D-drying, P-drying and oven-drying methods Cement and Concrete Research 36(4): 634-649
Kitayama, S.; Noguchi, M.; Satoyoshi, K. 1985: Automatic control system of drying zerkova wood by acoustic emission monitoring Acoustics Letters 9(4): 45-48
Moya, R.; Berrocal, A.; Rodriguez-Solis, M.; Muñoz, F. 2017: Effect of steam-drying treatment on moisture content, drying rate, color, and drying defects in juvenile wood of Tectona grandis from fast-growth plantations Drying Technology 35(15): 1832-1842