Suspension-to-Surface heat transfer in a circulating-fluidized-bed combustor
Ziegelhoeffer A.; De Jong J.W.; Ferrari R.; Turi Nagy L.
Aiche Journal 35(10): 1685-1691
1989
ISSN/ISBN: 0001-1541 DOI: 10.1002/aic.690351013
Accession: 062069139
PDF emailed within 0-6 h: $19.90
Related References
Golriz, M.R. 1996: Suspension-to-wall heat transfer in a 12-MWth circulating fluidized-bed combustor International Journal of Energy Research 20(7): 569-579Luan, W.; Bowen, B.D.; Lim, C.J.; Brereton, C.M.H.; Grace, J.R. 2000: Suspension-to-membrane-wall heat transfer in a circulating fluidized bed combustor International Journal of Heat and Mass Transfer 43(7): 1173-1185
Winaya, N.S.; Basu, P.; Reddy, B.V. 2003: Experimental investigations on heat transfer from suspension to impact separators in the riser column of a circulating fluidized bed combustor International Journal of Heat and Mass Transfer 46(1): 71-75
Nag, P.K.; Sallam Ali, M.; Reddy, B.V. 1993: Heat transfer in a circulating fluidized bed combustor burning indane gas Indian Journal of Technology 31(1): 9-12
Gui Young Han; Yong Jun Cho 1999: Radiative heat transfer in a circulating fluidized bed coal combustor Powder Technology 102(3): 266-273
Gnanapragasam, N.V.; Reddy, B.V. 2009: Numerical modeling of axial bed-to-wall heat transfer in a circulating fluidized bed combustor International Journal of Heat and Mass Transfer 52(7-8): 1657-1666
Yumin, C.H.A.N.G.; Yufu, L.O.; Mayyenn, C.H.E.N. 1990: Heat transfer measurements of a 1.0 ton-steam/HR circulating fluidized-bed combustor burning Taiwan coals Particulate Science and Technology 8(3-4): 199-208
Jin Hee Jeon; Sang Done Kim; Seung Jae Kim; Yong Kang 2008: Combustion and heat transfer characteristics in a square internally circulating fluidized bed combustor with draft tube Fuel 87(17-18): 3710-3713
Gnanapragasam, N.V.; Reddy, B.V. 2008: Numerical modeling of bed-to-wall heat transfer in a circulating fluidized bed combustor based on cluster energy balance International Journal of Heat and Mass Transfer 51(21-22): 5260-5268
Ziegelhoeffer A.; De Jong J.W.; Ferrari R.; Turi Nagy L. 1981: Mechanisms of heat transfer between a surface and a gas-fluidized bed for combustor application Progress in Energy and Combustion Science 7(2): 73-102
Nirmal Vijay, G.; Reddy, B.V. 2005: Effect of dilute and dense phase operating conditions on bed-to-wall heat transfer mechanism in a circulating fluidized bed combustor International Journal of Heat and Mass Transfer 48(16): 3276-3283
Wang, X.S.; Gibbs, B.M.; Rhodes, M.J.; Geldart, D. 1996: Convective wall-to-suspension heat transfer in circulating fluidized bed risers Aiche Journal 42(8): 2112-2117
Wang, X.S.; Gibbs, B.M.; Rhodes, M.J.; Geldart, D. 1996: A correlation for the suspension-to-wall heat-transfer coefficient in circulating fluidized beds Industrial and Engineering Chemistry Research 35(10): 3822-3823
Ozen, G.; Aydin, F.; Selçuk, N. 2016: Radiative Heat Transfer in the Dilute Zone of an Air-Fired Circulating Fluidized Bed Combustor and Its Oxy-Fired Retrofit Combustion Science and Technology 188(4-5): 730-744
Xie, D.; Bowen, B.D.; Grace, J.R.; Lim, C.J. 2003: A three-dimensional model for suspension-to-membrane-wall heat transfer in circulating fluidized beds Chemical Engineering Science 58(18): 4247-4258
Ziegelhoeffer A.; De Jong J.W.; Ferrari R.; Turi Nagy L. 1993: An investigation of fluidized-bed scaling: heat transfer measurements in a pressurized fluidized-bed combustor and a cold model bed Chemical Engineering Science 48(8): 1459-1473
Albusoul, M.A. 2002: Bed-to-surface heat transfer in a circulating fluidized bed Heat and Mass Transfer 38(4-5): 295-299
Ziegelhoeffer A.; De Jong J.W.; Ferrari R.; Turi Nagy L. 2000: Heat transfer between gassolids suspension and immersed surface in an upflow fluidized bed (riser) Chemical Engineering Science 55(5): 981-989
Talukdar, J.; Basu, P. 1995: A simplified model of nitric oxide emission from a circulating fluidized bed combustor : Circulating fluidized beds Canadian Journal of Chemical Engineering 73(5): 635-643
Dae Ho Lim; Ji Hwa Jang; Hae Ryong Jin; Yong Kang; Heon Jung; Sang Done Kim; Woo Hyun Kim 2011: Heat transfer in three-phase (G/L/S) circulating fluidized beds with low surface tension media Chemical Engineering Science 66(14): 3145-3151