Simulation of 3-D gas-particle flows and coal combustion in a tangentially fired furnace using a two-fluid-trajectory model
Ziegelhoeffer A.; De Jong J.W.; Ferrari R.; Turi Nagy L.
Powder Technology 125(2-3): 226-233
2002
ISSN/ISBN: 0032-5910 DOI: 10.1016/s0032-5910(01)00510-1
Accession: 063117215
PDF emailed within 0-6 h: $19.90
Related References
Al-Abbas, A Hussein; Naser, J; Hussein, E Kamil 2013: Numerical simulation of brown coal combustion in a 550MW tangentially-fired furnace under different operating conditions Fuel 107: 688-698Ziegelhoeffer A.; De Jong J.W.; Ferrari R.; Turi Nagy L. 2010: Coupled fluid dynamics and whole plant simulation of coal combustion in a tangentially-fired boiler Fuel 89(8): 2001-2010
Khaldi, N.; Chouari, Y.; Mhiri, H.; Bournot, P. 2015: CFD investigation on the flow and combustion in a 300 MWe tangentially fired pulverized-coal furnace Heat and Mass Transfer 52(9): 1881-1890
Tian, Z F.; Witt, P J.; Schwarz, M. Philip; Yang, W 2012: Combustion of Predried Brown Coal in a Tangentially Fired Furnace under Different Operating Conditions Energy and Fuels 26(2): 1044-1053
Tian, Z F.; Witt, P J.; Schwarz, M. Phillip; Yang, W 2010: Numerical Modeling of Victorian Brown Coal Combustion in a Tangentially Fired Furnace Energy and Fuels 24(9): 4971-4979
Bhuiyan, A.A.; Naser, J. 2016: Modelling of slag deposition and flow characteristics of coal combustion under oxy-firing condition in a 550 MW tangentially fired furnace Applied Thermal Engineering 106: 221-235
Sen Li; Tongmo Xu; Qulan Zhou; Houzhang Tan; Shien Hui 2010: Effect of coal-over-coal reburn on furnace temperature and heat flux distributions in 1 MW tangentially fired furnace International Journal of Thermal Sciences 49(1): 225-233
Sung, Y; Moon, C; Eom, S; Choi, G; Kim, D 2016: Coal-particle size effects on NO reduction and burnout characteristics with air-staged combustion in a pulverized coal-fired furnace Fuel 182: 558-567
Jiang, Y.; Jeon, C. 2020: Comparative Study on Combustion and Emission Characteristics of Torrefied and Ashless Biomass with Coal through the 500 MW Tangentially Fired Boiler Simulation Energy-Fuels 35(1): 561-574
Tan, P; Ma, L; Fang, Q; Zhang, C; Chen, G 2016: Application of Different Combustion Models for Simulating the Co-combustion of Sludge with Coal in a 100 MW Tangentially Coal-Fired Utility Boiler Energy and Fuels 30(3): 1685-1692
Fang, Q.; Wang, H.; Li, W.; Zhou, H.; Lei, L.; Duan, X.; Li, G.; Yang, H. 2009: Combustion modeling of blended coal in a 300-MW tangentially fired boiler using a two-mixture-fraction model Asia-Pacific Journal of Chemical Engineering 4(4): 471-479
Changdong Sheng; Behdad Moghtaderi; Rajender Gupta; Terry F Wall 2004: A computational fluid dynamics based study of the combustion characteristics of coal blends in pulverised coal-fired furnace Fuel 83(11-12): 1543-1552
Achim, D.; Naser, J.; Morsi, Y.S.; Pascoe, S. 2009: Numerical investigation of full scale coal combustion model of tangentially fired boiler with the effect of mill ducting Heat and Mass Transfer 46(1): 1-13
Sen, L.I.; Tongmo, X.U.; Qulan, Z.H.O.U.; Houzhang, T.A.N.; Shien, H.U.I.; Hongli, H.U. 2007: Optimization of coal reburning in a 1 MW tangentially fired furnace Fuel (Guildford) 86(7-8): 1169-1175
Sen Li; Tongmo Xu; Qulan Zhou; Houzhang Tan; Shien Hui; Hongli Hu 2007: Optimization of coal reburning in a 1 MW tangentially fired furnace Fuel 86(7-8): 1169-1175
Sen Li; Tongmo Xu; Shien Hui; Qulan Zhou; Houzhang Tan 2009: Optimization of air staging in a 1 MW tangentially fired pulverized coal furnace Fuel Processing Technology 90(1): 99-106
Shi, L.; Fu, Z.; Duan, X.; Cheng, C.; Shen, Y.; Liu, B.; Wang, R. 2016: Influence of combustion system retrofit on NO x formation characteristics in a 300 MW tangentially fired furnace Applied Thermal Engineering 98: 766-777
Pei, J.; Zhang, Z.; You, C. 2018: Optimizing the Combustion of Low-Quality Coal by the Wall Wind Auxiliary Combustion Method in a Tangentially Fired Utility Boiler Combustion Science and Technology 191(3): 570-589
Belosevic, S.; Sijercic, M.; Oka, S.; Tucakovic, D. 2006: Three-dimensional modeling of utility boiler pulverized coal tangentially fired furnace International Journal of Heat and Mass Transfer 49(19-20): 3371-3378
Houzhang Tan; Yanqing Niu; Xuebin Wang; Tongmo Xu; Shien Hui 2011: Study of optimal pulverized coal concentration in a four-wall tangentially fired furnace Applied Energy 88(4): 1164-1168