A three-dimensional model for suspension-to-membrane-wall heat transfer in circulating fluidized beds
Xie, D.; Bowen, B.D.; Grace, J.R.; Lim, C.J.
Chemical Engineering Science 58(18): 4247-4258
2003
ISSN/ISBN: 0009-2509
DOI: 10.1016/s0009-2509(03)00310-5
Accession: 063143287
PDF emailed within 0-6 h: $19.90
Related References
Wang, X.S.; Gibbs, B.M.; Rhodes, M.J.; Geldart, D. 1996: A correlation for the suspension-to-wall heat-transfer coefficient in circulating fluidized beds Industrial and Engineering Chemistry Research 35(10): 3822-3823Luan, W.; Bowen, B.D.; Lim, C.J.; Brereton, C.M.H.; Grace, J.R. 2000: Suspension-to-membrane-wall heat transfer in a circulating fluidized bed combustor International Journal of Heat and Mass Transfer 43(7): 1173-1185
Xie, D.; Bowen, B.D.; Grace, J.R.; Lim, C.J. 2003: Two-dimensional model of heat transfer in circulating fluidized beds. Part II: Heat transfer in a high density CFB and sensitivity analysis International Journal of Heat and Mass Transfer 46(12): 2193-2205
Xie, D.; Bowen, B.D.; Grace, J.R.; Lim, C.J. 2003: Two-dimensional model of heat transfer in circulating fluidized beds. Part I: Model development and validation International Journal of Heat and Mass Transfer 46(12): 2179-2191
Fox, W.B.; Grewal, N.S.; Moen, D.A. 1999: Wall-to-bed heat transfer in circulating fluidized beds International Communications in Heat and Mass Transfer 26(4): 499-508
Daming, S.H.I.; Nicolai, R.; Reh, L. 1998: Wall-to-bed heat transfer in circulating fluidized beds Chemical Engineering and Processing 37(4): 287-293
Wang, X.S.; Gibbs, B.M.; Rhodes, M.J.; Geldart, D. 1996: Convective wall-to-suspension heat transfer in circulating fluidized bed risers Aiche Journal 42(8): 2112-2117
Golriz, M.R. 1996: Suspension-to-wall heat transfer in a 12-MWth circulating fluidized-bed combustor International Journal of Energy Research 20(7): 569-579
Subbarao, D.; Basu, P. 1986: A model for heat transfer in circulating fluidized beds International Journal of Heat and Mass Transfer 29(3): 487-489
Ziegelhoeffer A.; De Jong J.W.; Ferrari R.; Turi Nagy L. 1990: A model for heat transfer in circulating fluidized beds Chemical Engineering Science 45(12): 3389-3398
-Ing. Molerus, O.; -Ing. Mattmann, W. 1992: Heat transfer mechanisms in gas fluidized beds. Part 3: Heat transfer in circulating fluidized beds Chemical Engineering and Technology 15(5): 291-294
Somjun, J.; Chinsuwan, A. 2018: Effect of transverse rib on heat transfer between circulating fluidized bed and membrane fins of water wall membrane tubes Powder Technology 332: 178-187
Kruse, M.; Schoenfelder, H.; Werther, J. 1995: A two-dimensional model for gas mixing in the upper dilute zone of a circulating fluidized bed : Circulating fluidized beds Canadian Journal of Chemical Engineering 73(5): 620-634
Qiao, H.E.; Winter, F.; Lu, J.D. 2002: Analysis of the heat transfer mechanism in high-temperature circulating fluidized beds by a numerical model Journal of Energy Resources Technology 124(1): 34-39
Mahalingam, M.; Kumar, K.A. 1991: Emulsion layer model for wall heat transfer in a circulating fluidized bed Aiche Journal 37(8): 1139-1150