Numerical simulation of three-dimensional flow, heat transfer, and solidification of steel in continuous casting mold with electromagnetic brake
Man, Y. Ha; Hyun, G. Lee; Seung, H. Seong
Journal of Materials Processing Technology 133(3): 322-339
2003
ISSN/ISBN: 0924-0136
DOI: 10.1016/s0924-0136(02)01009-9
Accession: 063193889
PDF emailed within 0-6 h: $19.90
Related References
Yu, H.; Zhu, M. 2008: Numerical Simulation of the Effects of Electromagnetic Brake and Argon Gas Injection on the Three-dimensional Multiphase Flow and Heat Transfer in Slab Continuous Casting Mold Isij International 48(5): 584-591Kim, D.S.; Kim, W.S.; Cho, K.H. 2000: Numerical simulation of the coupled turbulent flow and macroscopic solidification in continuous casting with Electromagnetic Brake Isij International 40(7): 670-676
Lei, H.; Zhang, H.W.; He, J.C. 2009: Flow, Solidification, and Solute Transport in a Continuous Casting Mold with Electromagnetic Brake Chemical Engineering and Technology 32(6): 991-1002
Okazawa, K.; Sawada, I.; Harada, H.; Toh, T.; Takeuchi, E. 1998: Characteristics of molten steel jet flow in a continuous casting mold with electromagnetic brake technique Tetsu-To-Hagane 84(7): 490-495
Cho, J.W.; Emi, T.; Shibata, H.; Suzuki, M. 1998: Heat transfer across mold flux film in mold during initial solidification in continuous casting of steel Isij International 38(8): 834-842
Yu Haiqi; Wang Baofeng; Li Huiqin; Li Jianchao 2008: Influence of electromagnetic brake on flow field of liquid steel in the slab continuous casting mold Journal of Materials Processing Technology 202(1-3): 179-187
Takatani, K. 2003: Effects of electromagnetic brake and meniscus electromagnetic stirrer on transient molten steel flow at meniscus in a continuous casting mold Isij International 43(6): 915-922
Cho, J.; Shibata, H.; Emi, T.; Suzuki, M. 1998: Radiative heat transfer through mold flux film during initial solidification in continuous casting of steel Isij International 38(3): 268-275
Kubo, N.; Ishii, T.; Kubota, J.; Aramaki, N. 2002: Two-phase flow numerical simulation of molten steel and argon gas in a continuous casting mold Isij International 42(11): 1251-1258
Sawada, I.; Kishida, Y.; Okazawa, K.; Tanaka, H. 1993: Numerical analysis of malten steel flow in a continuous casting mold by use of large eddy simulation Tetsu-To-Hagane 79(2): 160-166
Kubo, N.; Ishii, T.; Kubota, J.; Ikagawa, T. 2004: Numerical simulation of molten steel flow under a magnetic field with argon gas bubbling in a continuous casting mold Isij International 44(3): 556-564
Lei, S.; Zhang, J.; Zhao, X.; He, K. 2014: Numerical Simulation of Molten Steel Flow and Inclusions Motion Behavior in the Solidification Processes for Continuous Casting Slab Isij International 54(1): 94-102
Haitao, Z.H.A.N.G.; Nagaumi, H.; Jianzhong, C.U.I. 2007: Coupled modeling of electromagnetic field, fluid flow, heat transfer and solidification during low frequency electromagnetic casting of 7XXX aluminum alloys. Part II: The effects of electromagnetic parameters on casting processes Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 448(1-2): 177-188
Xincheng, M.I.A.O.; Timmel, K.; Lucas, D.; Ren, Z.; Eckert, S.; Gerbeth, G. 2012: Effect of an Electromagnetic Brake on the Turbulent Melt Flow in a Continuous-Casting Mold Metallurgical and Materials Transactions. B, Process Metallurgy and Materials Processing Science 43(4): 954-972
Choudhary, S.K.; Dipak, M.A.Z.U.M.D.A.R. 1995: Mathematical modelling of fluid flow, heat transfer and solidification phenomena in continuous casting of steel Steel Research 66(5): 199-205
Lan, X.K.; Khodadadi, J.M. 2001: Liquid steel flow, heat transfer and solidification in mold of continuous casters during grade transition International Journal of Heat and Mass Transfer 44(18): 3431-3442
Yu-Chuan Miao; Xiao-Ming Zhang; Hong-Shuang Di; Guo-Dong Wang 2006: Numerical simulation of the fluid flow, heat transfer, and solidification of twin-roll strip casting Journal of Materials Processing Technology 174(1-3): 7-13
Mahmoudi, J.; Vynnycky, M.; Sivesson, P.; Fredriksson, H. 2003: An experimental and numerical study on the modelling of fluid flow, heat transfer and solidification in a copper continuous strip casting process Materials Transactions - Jim 44(9): 1741-1751
Yamauchi, A.; Sorimachi, K.; Sakuraya, T.; Fujii, T. 1993: Heat transfer between mold and slab trough mold flux film in continuous casting of steel Tetsu-To-Hagane 79(2): 167-174
Seyedein, S.H.; Hasan, M. 1998: A 3-D numerical prediction of turbulent flow, heat transfer and solidification in a continuous slab caster for steel Can. Metall. Q 37(3-4): 213-228