Combustion and heat transfer characteristics in a square internally circulating fluidized bed combustor with draft tube
Jin Hee Jeon; Sang Done Kim; Seung Jae Kim; Yong Kang
Fuel 87(17-18): 3710-3713
2008
ISSN/ISBN: 0016-2361 DOI: 10.1016/j.fuel.2008.07.013
Accession: 063655373
PDF emailed within 0-6 h: $19.90
Related References
Jin Hee, J.E.O.N.; Sang Done, K.I.M.; Seung Jae, K.I.M.; Yong, K.A.N.G. 2008: Solid circulation and gas bypassing characteristics in a square internally circulating fluidized bed with draft tube Chemical Engineering and Processing 47(12): 2351-2360Lee, W.; Cho, Y.; Kim, J.; Kim, S.D. 1992: Coal combustion characteristics in a fluidized bed combustor with a draft tube Korean Journal of Chemical Engineering 9(4): 206-211
Roh, S.Ah.; Jung, D.Sung.; Kim, S.Done.; Guy, C. 2005: Combustion characteristics of spent catalyst and paper sludge in an internally circulating fluidized-bed combustor Journal of the Air and Waste Management Association 55(9): 1269-1276
Shin, D.; Jang, S.; Hwang, J. 2005: Combustion characteristics of paper mill sludge in a lab-scale combustor with internally cycloned circulating fluidized bed Waste Management 25(7): 680-685
Kim, S.D.; Kim, Y.H.; Roh, S.A.; Lee, D.H. 2002: Solid circulation characteristics in an internally circulating fluidized bed with orifice-type draft tube Korean Journal of Chemical Engineering 19(5): 911-916
Kim, Y.T.; Song, B.H.; Kim, S.D. 1997: Entrainment of solids in an internally circulating fluidized bed with draft tube Chemical Engineering Journal 66(2): 105-110
Song, B.H.; Kim, Y.T.; Kim, S.D. 1997: Circulation of solids and gas bypassing in an internally circulating fluidized bed with a draft tube Chemical Engineering Journal 68(2-3): 115-122
Wang, L.; Yuan, W.; Duan, S.; Sun, J.; Xu, L. 2018: Experimental and numerical investigation of heat transfer characteristics in an internally circulating fluidized bed Heat and Mass Transfer 55(4): 1195-1205
Jong Min Lee; Yong Jeon Kim; Sang Done Kim 1998: Catalytic coal gasification in an internally circulating fluidized bed reactor with draft tube Applied Thermal Engineering 18(11): 1013-1024
Ahn, H.; Lee, W.; KimDg, S.; Song, B. 1999: Solid circulation and gas bypassing in an internally circulating fluidized bed with an orifice-type draft Tube Korean Journal of Chemical Engineering 16(5): 618-623
Ajit Kumar, K.O.L.A.R.; Sundaresan, R. 2002: Heat transfer characteristics at an axial tube in a circulating fluidized bed riser Int. J. Therm. Sci 41(7): 673-681
Ziegelhoeffer A.; De Jong J.W.; Ferrari R.; Turi Nagy L. 2002: Heat transfer characteristics at an axial tube in a circulating fluidized bed riser International Journal of Thermal Sciences 41(7): 673-681
Kataoka, A.; Ihara, T.; Nowak, W.; Matsuda, H.; Hasatani, M.; Oda, A. 1994: Combustion characteristics of a circulating fluidized bed gas combustor with an internal nozzle Kagaku Kogaku Ronbunshu 20(6): 827-833
Kataoka, A.; Ihara, T.; Matsuda, H.; Hasatani, M.; Nowak, W.; Oda, A. 1995: Combustion characteristics of a circulating fluidized bed gas combustor for low calorific fuel Kagaku Kogaku Ronbunshu 21(4): 793-799
Mei, L; Lu, X; Wang, Q; Pan, Z; Hong Xuanyu Ji, Y 2014: The experimental study of fly ash recirculation combustion characteristics on a circulating fluidized bed combustor Fuel Processing Technology 118: 192-199
Jaroslaw Krzywanski; Tomasz Czakiert; Waldemar Muskala; Robert Sekret; Wojciech Nowak 2010: Modeling of solid fuel combustion in oxygen-enriched atmosphere in circulating fluidized bed boiler: Part 2. Numerical simulations of heat transfer and gaseous pollutant emissions associated with coal combustion in O2/CO2 and O2/N2 atmospheres enriched with oxygen under circulating fluidized bed conditions Fuel Processing Technology 91(3): 364-368
Sun, P; Hui, S'en; Gao, Z; Zhou, Q; Tan, H; Zhao, Q; Xu, T 2013: Experimental investigation on the combustion and heat transfer characteristics of wide size biomass co-firing in 0.2 MW circulating fluidized bed Applied Thermal Engineering 52(2): 284-292
Namkung, W.; Roh, S.A.H.; Guy, C.; Kim, S.D. 2008: Kinetics and Combustion Characteristics of Deinking Sludge in a Thermobalance and an Internally Circulating Fluidized Bed The Canadian Journal of Chemical Engineering 82(5): 939-947
Namkung, W.; Seon Ah, R.O.H.; Guy, C.; Sang Done, K.I.M. 2004: Kinetics and combustion characteristics of deinking sludge in a thermobalance and an internally circulating fluidized bed Canadian Journal of Chemical Engineering 82(5): 939-947
Nag, P.K.; Sallam Ali, M.; Reddy, B.V. 1993: Heat transfer in a circulating fluidized bed combustor burning indane gas Indian Journal of Technology 31(1): 9-12