Impulsive loading of ideal fibre-reinforced rigid-plastic beams Iii Cantilever bea M
Shaw, L.; M Spencer, A.J.
International Journal of Solids and Structures 13(9): 845-854
1977
ISSN/ISBN: 0020-7683
DOI: 10.1016/0020-7683(77)90070-1
Accession: 070240205
PDF emailed within 0-6 h: $19.90
Related References
Shaw, L.; Spencer, A.J.M. 1977: Impulsive loading of ideal fibre-reinforced rigid-plastic beams Ii Beam with end supports International Journal of Solids and Structures 13(9): 833-844Shaw, L.; Spencer, A.J.M. 1977: Impulsive loading of ideal fibre-reinforced rigid-plastic beams I Free beam under central impact International Journal of Solids and Structures 13(9): 823-831
A.J.M. Spencer 1974: Dynamics of ideal fibre-reinforced rigid-plastic beams Journal of the Mechanics and Physics of Solids 22(3): 147-159
Zhang, T.G.; Yu, T.X. 1986: The large rigid-plastic deformation of a circular cantilever beam subjected to impulsive loading International Journal of Impact Engineering 4(4): 229-241
England, A.H.; Rogers, T.G. 1992: Loading und loading of an elastic-plastic fibre-reinforced cantilever Mechanics Research Communications 19(4): 333-340
Zhang, T.G.; Stronge, W.J.; Yu, T.X. 1995: Dynamic deformation of rigid-plastic beams for general impulsive loading: a phenomenological model International Journal of Impact Engineering 16(4): 535-562
Tieguang G.; Longmao; Cheng G.; Tongxi, Y.U. 1988: Experimental investigation of circular cantilever beams subjected to impulsive loading Acta Mechanica Solida Sinica (English Ed.) 1(3): 301-313
Pizhong, Q.I.A.O.; Guiping, Z.O.U.; Davalos, J.F. 2003: Flexural-torsional buckling of fiber-reinforced plastic composite cantilever I-beams Composite Structures 60(2): 205-217
Raoof, M.; Hassanen, M.A.H. 2000: Peeling failure of reinforced concrete beams with fibre-reinforced plastic or steel plates glued to their soffits Proceedings of the Institution of Civil Engineers. Structures and Buildings 140(3): 291-305
Heffernan, P.J.; Erki, M.A. 1996: Equivalent capacity and efficiency of reinforced concrete beams strengthened with carbon fibre reinforced plastic sheets Canadian Journal of Civil Engineering 23(1): 21-29
Ziegelhoeffer A.; De Jong J.W.; Ferrari R.; Turi Nagy L. 1958: Impulsive loading of plastic beams with axial constraints Journal of the Mechanics and Physics of Solids 6(3): 186-202
Casapulla, C.; Jossa, P.; Maione, A. 2003: Some problems in modelling a rigid-plastic cantilever beam subjected to impact loading Advances In Earthquake Engineering: 109-120
Boutros, M.K. 2000: Elastic-plastic model of pinned beams subjected to impulsive loading Journal of Engineering Mechanics 126(9): 920-927
Lellep, J.; Torn, K. 2005: Shear and bending response of a rigid-plastic beam subjected to impulsive loading International Journal of Impact Engineering 31(9): 1081-1105
Hua, Y.L.; Yu, T.X.; Reid, S.R. 1988: Double-hinge modes in the dynamic response of plastic cantilever beams subjected to step loading International Journal of Impact Engineering 1(4): 401-413
Zhou, Q.; Yu, T.X.; Huang, Z. 1990: The large deflection of a rigid-perfectly plastic portal frame subjected to impulsive loading International Journal of Solids and Structures 26(11): 1225-1242
Lepik, U. 1994: Vibrations of elastic-plastic fully clamped beams and flat arches under impulsive loading International Journal of Non-Linear Mechanics 29(4): 613-623
Wang, N.; Mindess, S.; Ko, K. 1996: Fibre reinforced concrete beams under impact loading Cement and Concrete Research 26(3): 363-376
Turvey, G.J. 1997: Analysis of pultruded glass reinforced plastic beams with semi-rigid end connections International Conference on Composite Structures (Iccs) 9 38(1-4): 3-16
Lepikult, T.; Schmidt, W.H.; Werner, H. 1999: Optimal design of rigid-plastic beams subjected to dynamical loading Structural Optimization 18(2-3): 116-125