A process simulation model for a 2 ton H-1 incinerator (a combined bed combustion and furnace heat transfer model)
Won, Y.A.N.G.; Donghoon, S.H.I.N.; Sangmin, C.H.O.I.
International Journal of Energy Research 22(11): 943-951
1998
ISSN/ISBN: 0363-907X
Accession: 073772709
PDF emailed within 1 workday: $29.90
Related References
Bordbar, M Hadi; Myöhänen, K; Hyppänen, T 2015: Coupling of a radiative heat transfer model and a three-dimensional combustion model for a circulating fluidized bed furnace Applied Thermal Engineering 76: 344-356Yoshimoto, T.; Okamoto, T.; Takagi, T.; Katsuki, M. 1999: Numerical simulation of combustion and nongray radiative heat transfer in a furnace and its comparison with experiments Jsme International Journal. Series B, Fluids and Thermal Engineering 42(4): 752-759
Teixeira, A.; Balaban, M.; Germer, S.; Sadahira, M.; Teixeira-Neto, R.; Vitali, A. 1999: Heat transfer model performance in simulation of process deviations Journal of food science 64(3): 488-493
Eden, D.; Luckas, M. 1998: Ein Wärme- und Stofftransportmodell zur Simulation der Rauchgasreinigung nach dem Kalksteinwaschverfahren - A heat and mass transfer model for simulation of flue gas treatment by the limestone scrubbing process Chemieingenieurtechnik 70(1-2): 160-165
Grossmann, U. 1982: Simulation of combined transfer of oxygen and heat through the skin using a capillary loop model Mathematical Biosciences 61(2): 205-236
Dirk Eden; Michael Luckas 1998: A Heat and Mass Transfer Model for the Simulation of the Wet Limestone Flue Gas Scrubbing Process Chemical Engineering and Technology 21(1): 56-60
Hashimoto, N.; Kurose, R.; Hwang, S.M.; Tsuji, H.; Shirai, H. 2012: A numerical simulation of pulverized coal combustion employing a tabulated-devolatilization-process model (TDP model) Combustion and Flame 159(1): 353-366
Martens, M.S.heerlinck, N.B.lie, N.D.; Baerdemaeker, J.D. 2001: Numerical model for the combined simulation of heat transfer and enzyme inactivation kinetics in cylindrical vegetables Journal of food engineering 47(3): 185-193
Park, S; Kim, J A.; Ryu, C; Chae, T; Yang, W; Kim, Y-Ju; Park, H-Young; Lim, H-Chun 2013: Combustion and heat transfer characteristics of oxy-coal combustion in a 100MWe front-wall-fired furnace Fuel 106: 718-729
Le, C.V.; Bansal, P.K.; Tedford, J.D. 2005: Simulation model of a screw liquid chiller for process industries using local heat transfer integration approach Proceedings of the Institution of Mechanical Engineers. Part E, Journal of Process Mechanical Engineering 219(2): 95-107
Ziegelhoeffer A.; De Jong J.W.; Ferrari R.; Turi Nagy L. 2002: Simulation of 3-D gas-particle flows and coal combustion in a tangentially fired furnace using a two-fluid-trajectory model Powder Technology 125(2-3): 226-233
Ryu, C.; Shin, D.; Choi, S. 2002: Combined simulation of combustion and gas flow in a grate-type incinerator Journal of the Air and Waste Management Association 52(2): 189-197
Ryu, C.; Shin, D.; Choi, S. 2002: Combined Simulation of Combustion and Gas Flow in a Grate-Type Incinerator Journal of the Air and Waste Management Association 52(2): 189-197
Holmberg, H.; Ahtila, P. 2006: Simulation model for the model-based control of a biofuel dryer at an industrial combined heat and power plant Drying Technology 24(10/12): 1547-1557
Matsevityy Yu, M.; Malyarenkov, V.A.; Lotsman, T.V.; Braginskiy, A.M. 1984: Simulation of combined heat transfer in the hot-blast valve of a blast-furnace air preheater Heat Transfer. Soviet Research 16(1): 28-35