A two-dimensional model for gas mixing in the upper dilute zone of a circulating fluidized bed : Circulating fluidized beds
Kruse, M.; Schoenfelder, H.; Werther, J.
Canadian Journal of Chemical Engineering 73(5): 620-634
1995
ISSN/ISBN: 0008-4034
Accession: 073840824
PDF emailed within 1 workday: $29.90
Related References
Koenigsdorff, R.; Werther, J. 1995: Gas-solids mixing and flow structure modeling of the upper dilute zone of a circulating fluidized bed Powder Technology 82(3): 317-329Talukdar, J.; Basu, P. 1995: A simplified model of nitric oxide emission from a circulating fluidized bed combustor : Circulating fluidized beds Canadian Journal of Chemical Engineering 73(5): 635-643
Juray De Wilde; Gorik Van Engelandt; Geraldine, J. Heynderickx; Guy, B. Marin 2005: Gassolids mixing in the inlet zone of a dilute circulating fluidized bed Powder Technology 151(1-3): 96-116
Werther, J.; Hartge, E.U.; Kruse, M. 1992: Radial gas mixing in the upper dilute core of a circulating fluidized bed Powder Technology 70(3): 293-301
Octave Levenspiel 2002: G/S reactor modelspacked beds, bubbling fluidized beds, turbulent fluidized beds and circulating (fast) fluidized beds Powder Technology 122(1): 1-9
Zhu, J.X.; Yu, Z.Q.; Jin, Y.; Grace, J.R.; Issangya, A. 1995: Cocurrent downflow circulating fluidized bed (downer) reactors : a state of the art review : Circulating fluidized beds Canadian Journal of Chemical Engineering 73(5): 662-677
Wei, F.; Yang, G.Q.; Jin, Y.; Yu, Z.Q. 1995: The characteristics of cluster in a high density circulating fluidized bed : Circulating fluidized beds Canadian Journal of Chemical Engineering 73(5): 650-655
Liang, W.; Wu, Q.; Yu, Z.; Jin, Y.; Wang, Z. 1995: Hydrodynamics of a gas-liquid-solid three phase circulating fluidized bed : Circulating fluidized beds Canadian Journal of Chemical Engineering 73(5): 656-661
Berruti, F.; Chaouki, J.; Godfroy, L.; Pugsley, T.S.; Patience, G.S. 1995: Hydrodynamics of circulating fluidized bed risers : a review : Circulating fluidized beds Canadian Journal of Chemical Engineering 73(5): 579-602
Knoebig, T.; Luecke, K.; Werther, J. 1999: Mixing and reaction in the circulating fluidized bed A three-dimensional combustor model Chemical Engineering Science 54(13-14): 2151-2160
Xie, D.; Bowen, B.D.; Grace, J.R.; Lim, C.J. 2003: A three-dimensional model for suspension-to-membrane-wall heat transfer in circulating fluidized beds Chemical Engineering Science 58(18): 4247-4258
Xie, D.; Bowen, B.D.; Grace, J.R.; Lim, C.J. 2003: Two-dimensional model of heat transfer in circulating fluidized beds. Part I: Model development and validation International Journal of Heat and Mass Transfer 46(12): 2179-2191
Koksal, M.; Hamdullahpur, F. 2004: Gas mixing in circulating fluidized beds with secondary air injection Chemical Engineering Research and Design 82(8): 979-992
Yu-Feng Zhang; Hamid Arastoopour 1995: Dilute fluidized cracking catalyst particles-gas flow behavior in the riser of a circulating fluidized bed Powder Technology 84(3): 221-229
Detlef Westphalen; Leon Glicksman 1995: Lateral solid mixing measurements in circulating fluidized beds Powder Technology 82(2): 153-167