An improved cluster-renewal model for the estimation of heat transfer coefficients on the furnace walls of commercial circulating fluidized bed boilers
Dutta, A.; Basu, P.
Journal of Heat Transfer 126(6): 1040-1043
2004
ISSN/ISBN: 0022-1481
Accession: 074003175
PDF emailed within 1 workday: $29.90
Related References
Dutta, A.; Basu, P. 2002: Overall heat transfer to water walls and wing walls of commercial circulating fluidized-bed boilers Journal of the Institute of Energy 75(504): 85-90Basu, P.; Nag, P.K. 1996: Heat transfer to walls of a circulating fluidized-bed furnace Chemical Engineering Science 51(1): 1-26
Wang, W; Si, X; Yang, H; Zhang, H; Lu, J 2010: Heat-Transfer Model of the Rotary Ash Cooler Used in Circulating Fluidized-Bed Boilers Energy and Fuels 24(4): 2570-2575
Wu, H.A.I.B.O.; Zhang, M.A.N.; Sun, Y.U.N.K.A.I.; Lu, Q.I.N.G.G.A.N.G.; Na, Y.O.N.G.J.I.E. 2012: Research on the heat transfer model of platen heating surface of 300 MW circulating fluidized bed boilers Powder Technology 226: 83-90
Chinsuwan, A; Dutta, A; Janlasad, N 2014: Prediction of the heat flux profile on the furnace wall of circulating fluidized bed boilers Journal of the Energy Institute 87(4): 314-320
Bordbar, M Hadi; Myöhänen, K; Hyppänen, T 2015: Coupling of a radiative heat transfer model and a three-dimensional combustion model for a circulating fluidized bed furnace Applied Thermal Engineering 76: 344-356
Koppel, L.B.; Patel, R.D.; Holmes, J.T. 1970: Statistical models for surface renewal in heat and mass transfer. Part IV: Wall to fluidized bed heat transfer coefficients Aiche Journal 16(3): 464-471
Golriz, M.R.; Sunden, B. 1995: An analytical-empirical model to predict heat transfer coefficients in circulating fluidized bed combustors Heat and Mass Transfer 30(6): 377-383
Leckner, B.; Andersson, B.A. 1992: Characteristic features of heat transfer in circulating fluidized bed boilers Powder Technology 70(3): 303-314
B.-Å. Andersson 1996: Effects of bed particle size on heat transfer in circulating fluidized bed boilers Powder Technology 87(3): 239-248
Andersson, B.A.; Leckner, B. 1992: Experimental methods of estimating heat transfer in circulating fluidized bed boilers International Journal of Heat and Mass Transfer 35(12): 3353-3362
Werner, A. 2001: Solids distribution as a basis for modeling of heat transfer in circulating fluidized bed boilers Itss International Thermal Science Seminar 25(5): 269-276
Anusorn Chinsuwan; Animesh Dutta 2009: An investigation of the heat transfer behavior of longitudinal finned membrane water wall tubes in circulating fluidized bed boilers Powder Technology 193(2): 187-194
Lu, J.F.; Zhang, J.S.; Yue, G.X.; Liu, Q.; Yu, L.; Lin, X.D.; Li, W.J.; Tang, Y.; Luo, T.Y.; Ge, R.S. 2002: Method of calculation of heat transfer coefficient of the heater in a circulating fluidized bed furnace Heat Transfer, Asian Research 31(7): 540-550
Petitjean, C.; Crabol, J. 1991: Mesures des coefficients d'échange de chaleur dans un milieu diphasique en transport pneumatique - Measurements of heat transfer coefficients from the dilute phase of a circulating fluidized bed Revue Generale de Thermique 30(358): 614-620