EurekaMag Full Text Articles Chapter 74,040

Aranyosiova, M.; Chorvatova, A.; Chorvat, D.; Biro, C.; Velic, D. 2006: Analysis of cardiac tissue by gold cluster ion bombardment. Appl. Surf. Sci 252(19): 6782-6785

Vernez, L.; Thormann, W.; Krahenbuhl, S. 2000: Analysis of carnitine and acylcarnitines in urine by capillary electrophoresis. J. Chromatogr 895(1-2): 309-316

Liaaenjensen, S.; Andrewes, A.G. 1985: Analysis of carotenoids and related polyene pigments. Methods in Microbiology 18: 235-255

Benamotz, A.; Fishler, R. 1998: Analysis of carotenoids with emphasis on 9-cis β-carotene in vegetables and fruits commonly consumed in Israel. Food Chem 62(4): 515-520

Lin, B.A.I.; Qinye, Y.I.N.; Huiming, W.A.N.G. 2010: Analysis of Carrier Frequency Offset Estimation with Multiple Pilot Block Sequences. IEEE Communications Letters 14(5): 456-458

Bera, L.K.; Mathew, S.; Fitzgerald, E.A.; Balasubramanian, N.; Braithwaite, G.; Currie, M.T.; Singaporewala, F.; Yap, J.; Hammond, R.; Lochtefeld, A.; Bulsara, M.T. 2004: Analysis of carrier generation lifetime in strained-Si/SiGe heterojunction MOSFETs from capacitance transient. Appl. Surf. Sci 224(1-4): 278-282

Just, D.; Bryngdahl, O. 1987: Analysis of carrier procedures for discrete halftoning. Optics Communications 64(1): 23-30

Lai, W.T.; Wu, C.W.; Lin, C.C.; Li, P.W. 2011: Analysis of Carrier Transport in Trigate Si Nanowire MOSFETs. Ieee Trans. Electron Devices 58(5): 1336-1343

Mahawela, P.; Jeedigunta, S.; Ferekides, C.S.; Morel, D.L. 2003: Analysis of carrier transport phenomena in high band gap II-VI-based MIS photovoltaic devices. E-Mrs Spring Meeting, Symposium B: Thin Film Chalcogenide Photovoltaic Materials 431-432: 461-465

Pippenger, N. 2002: Analysis of carry propagation in addition: An elementary approach. Journal of Algorithms 42(2): 317-333

Natsume, N.; Kondo, S.; Matsuyama, Y.; Sumida, K.; Inou, H.; Kawakami, N.; Sandell, L.J.; Iwata, H. 2001: Analysis of cartilage-derived retinoic acid-sensitive protein in cerebrospinal fluid from patients with spinal diseases. Spine (Philadelphia, Pa 1976) 26(2): 157-160

Terzis, J.K.; Noah, M.E. 1997: Analysis of 100 cases of free-muscle transplantation for facial paralysis. Annual Meeting of the American Society of Plastic and Reconstructive Surgeons (Montreal 1995-10) 99(7): 1905-1921

Hwang, G.S.; Chen, C.H. 2011: Analysis of cases of gravity quaywall movement during earthquakes. Geotechnique 61(3): 199-210

Nehal, K.S.; Pebenito, R.; Orlow, S.J. 1996: Analysis of 54 cases of hypopigmentation and hyperpigmentation along the lines of Blaschko. Archives of Dermatology (1960) 132(10): 1167-1170

De Paula, A.M.B.; Souza, L.R.; Gomez, R.S.; Farias, L.C.; Correa, G.T.B.; Fraga, C.A.C.; Eleuterio, N.B.; Silveira, A.C.O.; Santos, F.B.G.; Haikal, D.S.; Guimaraes, A.L.S. 2009: Analysis of 724 cases of primary head and neck squamous cell carcinoma (HNSCC) with a focus on young patients and p53 immunolocalization. Oral Oncology (1997) 45(9): 777-782

Riggs, N.; Houry, D.; Long, G.; Markovchick, V.; Feldhaus, K.M. 2000: Analysis of 1,076 cases of sexual assault. Society for Academic Emergency Medicine Annual Meeting (Denver, Co 1996-05) 35(4): 358-362

Nirmala, R.A.I. 1988: Analysis of 500 cases of termination of pregnancy in mid trimester period. Patna Journal of Medicine 62(7): 119-122

Patzakis, M.J.; Rao, S.; Wilkins, J.; Moore, T.M.; Harvey, P.J. 1991: Analysis of 61 cases of vertebral osteomyelitis. Clinical Orthopaedics and Related Research (264): 178-183

Chiotis, E.; Vrellis, G. 1995: Analysis of casing failures of deep geothermal wells in Greece. Geothermics 24(5-6): 695-705

Huiying, W.A.N.G.; Tongsheng, C.H.E.N.; Lei, S.U.N. 2008: Analysis of caspase-3 in ASTC-a-1 cells treated with mitomycin C using acceptor photobleaching techniques. Proc. Spie Int. Soc. Opt. Eng: 68570J.1-68570J.7

Vinatier, S.; Bezard, B.; Kunde, V.G.; Nixon, C.A.; Mamoutkine, A.; Carlson, R.C.; Jennings, D.E.; Guandique, E.A.; Teanby, N.A.; Bjoraker, G.L.; Flasar, F.M. 2010: Analysis of Cassini/CIRS limb spectra of Titan acquired during the nominal mission I. Hydrocarbons, nitriles and CO2 vertical mixing ratio profiles. Icarus (New York, N.Y. 1962) 205(2): 559-570

Vinatier, S.; Bezard, B.; Bjoraker, G.L.; Flasar, F.M.; Kunde, V.G.; De Kok, R.; Anderson, C.M.; Samuelson, R.E.; Nixon, C.A.; Mamoutkine, A.; Carlson, R.C.; Jennings, D.E.; Guandique, E.A. 2010: Analysis of Cassini/CIRS limb spectra of Titan acquired during the nominal mission II: Aerosol extinction profiles in the 600-1420 cm-1 spectral range. Icarus (New York, N.Y. 1962) 210(2): 852-866

Bishara, A.G.; Papakonstantinou, N.G. 1990: Analysis of cast-in-place concrete segmental cantilever bridges - Calcul des ponts en béton construits par encorbellements successifs. Journal of Structural Engineering (New York) 116(5): 1247-1268

Senff, U.E. 1985: Analysis of cast iron by X-ray fluorescence spectrometry. Analytica Chimica Acta 169: 201-207

Bielgolaska, M. 1998: Analysis of cast steel fracture mechanisms for different states of stress. Fatigue and Fracture of Engineering Materials and Structures 21(8): 965-975

Dillingham, T.R.; Spellman, N.T.; Braverman, S.E.; Zeigler, D.N.; Belandres, P.V.; Bryant, P.R.; Salcedo, V.L.; Schneider, R.L. 1993: Analysis of casualties referred to army physical medicine services during the Persian Gulf conflict. Am. J. Phys. Med. Rehabil 72(4): 214-218

Lakhapatri, S.L.; Abraham, M.A. 2011: Analysis of catalyst deactivation during steam reforming of jet fuel on Ni-(PdRh)/γ-Al2O3 catalyst. Applied Catalysis. A, General 405(1-2): 149-159

Wang Geun, S.H.I.M.; Jae Wook, L.E.E.; Sang Chai, K.I.M. 2008: Analysis of catalytic oxidation of aromatic hydrocarbons over supported palladium catalyst with different pretreatments based on heterogeneous adsorption properties. Applied Catalysis. B, Environmental 84(1-2): 133-141

Kito, S.; Hattori, T. 2007: Analysis of catalytic performance by partial differentiation of neural network pattern. Iscre-19 : International Symposium on Chemical Reaction Engineering 62(18-20): 5575-5578

Ichikawa, K.; Tonozuka, T.; Yokota, T.; Shimura, Y.; Sakano, Y. 2000: Analysis of catalytic residues of Thermoactinomyces vulgaris R-47 α-amylase II (TVA II) by site-directed mutagenesis. Bioscience, Biotechnology, and Biochemistry 64(12): 2692-2695

Hogan, R.E.; Skocypec, R.D. 1992: Analysis of catalytically enhanced solar absorption chemical reactors. I: Basic concepts and numerical model description. Journal of Solar Energy Engineering 114(2): 106-111

Skocypec, R.D.; Hogan, R.E. 1992: Analysis of catalytically enhanced solar absorption chemical reactors. II: Predicted characteristics of a 100 kW chemical reactor. Journal of Solar Energy Engineering 114(2): 112-118

Ferruzzi, M.G.; Green, R.J. 2006: Analysis of catechins from milk-tea beverages by enzyme assisted extraction followed by high performance liquid chromatography. Food Chemistry 99(3): 484-491

Katz, B.M.; Mcsweeney, M. 1984: Analysis of categorical data whem subjects can appear in any number of categories. The Journal of Experimental Education 52(2): 122-126

Woolson, R.F.; Clarke, W.R. 1984: Analysis of categorical incomplete longitudinal data. Journal of the Royal Statistical Society 147: 87-99

Morrison, G.S.; Kondaurova, M.V. 2009: Analysis of categorical response data: Use logistic regression rather than endpoint-difference scores or discriminant analysis (L). Journal of the Acoustical Society of America 126(5): 2159-2162

Lee, S.H.; Kim, J.O.; Jung, H.S. 2004: Analysis of catenary voltage of an AT-fed AC HSR system. IEEE Transactions on Vehicular Technology 53(6): 1856-1862

Gerdes, B.; Ramaswamy, A.; Simon, B.; Pietsch, T.; Bastian, D.; Kersting, M.; Moll, R.; Bartsch, D. 1999: Analysis of β-catenin gene mutations in pancreatic tumors. Digestion 60(6): 544-548

Yamalik, N.; Gunday, S.; Uysal, S.; Kilinc, K.; Karabulut, E.; Tozum, T.F. 2012: Analysis of Cathepsin-K Activity at Tooth and Dental Implant Sites and the Potential of This Enzyme in Reflecting Alveolar Bone Loss. Journal of Periodontology (1970) 83(4): 498-505

Smith, S.N. 1993: Analysis of cathodic protection on an underprotected offshore pipeline. Materials Performance 32(4): 23-27

Besson, G.; Drits, V.A.; Daynyak, L.G.; Smoliar, B.B. 1987: Analysis of cation distribution in dioctahedral micaceous minerals on the basis of IR spectroscopy data - Analyse de la répartition des cations dans des minéraux micacés dioctaédriques à partir des données de spectroscopie IR. Clay Minerals 22(4): 465-478

Chakkaravarthi, S.; Gromiha, M.M. 2006: Analysis of cation-π interactions to the structural stability of RNA binding proteins. Polymer (Guildford) 47(2): 709-721

Satoshi, T.A.K.A.N.O.; Tsuji, K. 1983: Analysis of cationic and amphoteric surfactants. IV: Structural analysis of the amphoteric surfactants obtained by the reaction of 1-(2-hydroxyethyl)-2-alkyl-2-imidazoline with ethyl acrylate. Journal of the American Oil Chemists' Society 60(10): 1798-1806

Satoshi, T.A.K.A.N.O.; Tsuji, K. 1983: Analysis of cationic and amphoteric surfactants. V: Structural analysis of the amphoteric surfactants obtained by the reaction of 1-(2-hydroxyethyl)-2-alkyl-2-imidazoline with sodium monochloroacetate. Journal of the American Oil Chemists' Society 60(10): 1807-1815

Reznicek, R.; Stepankova, H.; Chlan, V.; Novak, P.; Kozlowski, A. 2012: Analysis of Cationic Impurity Impact on Hyperfine Interactions in Magnetite. Intermag'2011 IEEE International Magnetics Conference 48(11): 3039-3042

Morawski, J.; Alden, P.; Sims, A. 1993: Analysis of cationic nutrients from foods by ion chromatography. J. Chromatogr 640(1-2): 359-364

Matysik, J.; Kroszka, H.; Persona, A. 1987: Analysis of cationic surface active agents using DME and its relevance to their adsorption. Adsorption Science and Technology 4(1-2): 53-57

Elkhateeb, S.; Mohamed, Z.H.; Elsayed, L. 1988: Analysis of cationic surfactants: application of the acid-dye technique for the analysis of some cationic surfactants. Tenside Detergents 25(4): 236-239

Lyon, P.A.; Crow, F.W.; Tomer, K.B.; Gross, M.L. 1984: Analysis of cationic surfactants by mass spectrometry/mass spectrometry with fast atom bombardment. Analytical Chemistry 56(13): 2278-2284

Truchan, J.; Rasmussen, H.T.; Omelczenko, N.; Mcpherson, B.P. 1996: Analysis of cationic surfactants in household products by high performance liquid chromatography with nitrogen chemiluminescence detection. Journal of Liquid Chromatography and Related Technologies 19(11): 1785-1792

Coutierdelgosha, O.; Stutz, B.; Vabre, A.; Legoupil, S. 2007: Analysis of cavitating flow structure by experimental and numerical investigations. Journal of Fluid Mechanics 578: 171-222

Yonezawa, T.; Kanda, H. 1985: Analysis of cavitation erosion on cylinder liner and cylinder block. Sae Transactions 94: 229-239

Hattori, S.; Kitagawa, T. 2010: Analysis of cavitation erosion resistance of cast iron and nonferrous metals based on database and comparison with carbon steel data. Wear 269(5-6): 443-448

Vlaming, D.J. 1984: Analysis of cavitation provides advanced NPSH estimates for centrifugal pumps. Oil and Gas Journal 82(47): 143-150

Dey, S.; Aanandan, C.K.; Mohanan, P.; Nair, K.G. 1994: Analysis of cavity backed printed dipoles. Electronics Letters 30(3): 173-174

Vegni, L.; Bilotti, F.; Toscano, A. 2001: Analysis of cavity backed rectangular patch antennas with inhomogeneous chiral substrates via a FEM-BEM formulation. Ieee Trans. Magn 37(5): 3260-3263

Belzunce, J.; Suery, M. 1983: Analysis of cavity growth and fracture in superplastic α/β brasses - Analyse des Hohlraumwachstums und Bruches in superplastischen α/β-Messungen. Acta Metallurgica 31(10): 1497-1504

Hirth, J.P.; Nix, W.D. 1985: Analysis of cavity nucleation in solids subjected to external and internal stresses. Acta Metallurgica 33(3): 359-368

Chang, R.S.; Sheu, J.Y.; Lin, C.H.; Liu, H.C. 2003: Analysis of CCD moiré pattern for micro-range measurements using the wavelet transform. Optics and Laser Technology 35(1): 43-47

Minh Ha, N.G.U.Y.E.N.; Abbass, H.A.; Mckay, R.I. 2008: Analysis of CCME : Coevolutionary Dynamics, Automatic Problem Decomposition, and Regularization. IEEE Transactions on Systems, man and Cybernetics. Part C, Applications and Reviews 38(1): 100-109

Bullard, J.W.; Stutzman, P.E. 2006: Analysis of CCRL proficiency cements 151 and 152 using the Virtual Cement and Concrete Testing Laboratory. Cem. Concr. Res 36(8): 1548-1555

Uciechowski, P.; Werfel, T.; Leo, R.; Gessner, J.E. 1992: Analysis of CD16+dim and CD16+brght lymphocytes-comparison of peripheral and clonal non-MHC-restricted T cells and NK cells. Immunobiology (1979) 185(1): 28-40

Bollong, A.B.; Proux, G.T. 1989: Analysis of Cd0.21Hg0.79Te quenched in 10-4 g. Journal of Crystal Growth 94(2): 475-480

Reefer, A.J.; Satinover, S.M.; Solga, M.D.; Lannigan, J.A.; Nguyen, J.T.; Wilson, B.B.; Woodfolk, J.A. 2008: Analysis of CD25hiCD4+ regulatory T-cell subtypes in atopic dermatitis reveals a novel TH2-like population. Journal of Allergy and Clinical Immunology 121(2): 415-422

Winkler, M.; Schwinzer, R.; Ringe, B.; Pichlmayr, R. 1992: Analysis of CD45RA-CD45RO+ memory T cells in patients after kidney, heart, and liver transplantation. Anniversary of the Collaborative Transplant Study and 100,000 Cts Transplants 24(6): 2532-2534

Alisa, A.; Ives, A.; Pathan, A.A.; Navarrete, C.V.; Willians, R.; Bertoletti, A.; Behboudi, S. 2005: Analysis of CD4+ T-cell responses to a novel α-fetoprotein-derived epitope in hepatocellular carcinoma patients. Clinical Cancer Research 11(18): 6686-6694

Croft, M.; Swain, S.L. 1992: Analysis of CD4+ T cells that provide contact-dependent bystander help to B cells. The Journal of Immunology (1950) 149(10): 3157-3165

Kootstra, N.A.; Miedema, F.; Schuitemaker, H. 1997: Analysis of CD8+ T lymphocyte-mediated nonlytic suppression of autologous and heterologous primary human immunodeficiency virus type 1 isolates. Aids Research and Human Retroviruses 13(8): 684-693

Tsoulos, G.V.; Athanasiadou, G.E. 2014: Analysis of CDMA MIMO Beamforming Multicell Deployment Scenarios using Effective Radiation Patterns. Wireless Personal Communications 75(4): 2269-2280

Gessert, T.A.; Asher, S.; Johnston, S.; Young, M.; Dippo, P.; Corwine, C. 2007: Analysis of CdS/CdTe devices incorporating a ZnTe:Cu/Ti contact. Emrs 2006 Conference: Symposium o on Thin Film Chalcogenide Photovoltaic Materials 515(15): 6103-6106

Burgelman, M.; Verschraegen, J.; Degrave, S.; Nollet, P. 2005: Analysis of CdTe solar cells in relation to materials issues. Thin Solid Films 480-81: 392-398

Manuilov, K.K. 1993: Analysis of ceftazidime and ampicillin tissue distribution with using physiological models of pharmacokinetics. Antibiotiki i Himioterapia 38(6): 41-45

Helms, J.; Weichbold, V.; Baumann, U.; Von Specht, H.; Schon, F.; Muller, J.; Esser, B.; Ziese, M.; Anderson, I.; Dhaese, P. 2004: Analysis of ceiling effects occurring with speech recognition tests in adult cochlear-lmplanted patients. Orl 66(3): 130-135

Kim, Y.N.; Kim, J.K.; Park, W.S.; Park, Y.S. 2005: Analysis of cell configuration effects on nuclear characteristics in a lead-bismuth cooled core for TRU incineration. Journal of Nuclear Science and Technology 42(10): 916-926

Wei, J.I.A.N.G.; Hunter, T. 1998: Analysis of cell-cycle profiles in transfected cells using a membrane-targeted GFP. Biotechniques 24(3): 349-354

Nasi, M.I.A.N. 1986: Analysis of cell-growth-phase-related variations in hyaluronate synthase activity of isolated plasma-membrane fractions of cultured human skin fibroblasts. Biochemical Journal (London 1906) 237(2): 333-342

Jones, C.J.; Lloyd, R.S.; Wood, R.D. 1994: Analysis of cell harboring a putative DNA repair gene reveals a lock of evidence for a second independent xeroderma pigmentosum group A correcting gene. Mutation Research. Mutation Research Letters 324(4): 159-164

Kim, S.W.; Pyun, S.I. 2002: Analysis of cell impedance treasured on the LiMn2O4 film electrode by PITT and EIS with Monte Carlo simulation. Journal of Electroanalytical Chemistry (1992) 528(1-2): 114-120

Siomina, I.; Yuan, D. 2012: Analysis of Cell Load Coupling for LTE Network Planning and Optimization. IEEE Transactions on Wireless Communications 11(6): 2287-2297

Yanni, G.; Whelan, A.; Feighery, C.; Bresnihan, B. 1992: Analysis of cell populations in rheumatoid arthritis synovial tissues. Semin. Arthritis Rheum 21(6): 393-399

Liu, W.; Chen, X.; Wang, W. 2013: Analysis of Cell Range Expansion with TDM ICIC in Heterogeneous Cellular Networks. Ieice Transactions on Communications 96(7): 1865-1873

Nicklin, S.A.; Reynolds, P.N.; Brosnan, M.J.; White, S.J.; Curiel, D.T.; Dominiczak, A.F.; Baker, A.H. 2001: Analysis of cell-specific promoters for viral gene therapy targeted at the vascular endothelium. Hypertension (Dallas, Tex 1979) 38(1): 65-70

Barsema, J.N.; Bostoen, C.L.; Jansen, R.H.S.; Mulder, M.H.V.; Nauta, W.J.; Steeman, P.A.M.; Wessling, M. 2003: Analysis of cell-stabilizing additives in low-density polyethylene foams using low-frequency dielectric spectroscopy. Macromolecules 36(18): 6817-6823

Timpa, J.D.; Triplett, B.A. 1993: Analysis of cell-wall polymers during cotton fiber development. Planta 189(1): 101-108

Berner Berntzen, H.; Willardgallo, K.E.; Munthe, E.; Jellum, E. 1986: Analysis of cellular and membrane extracts of human leukocytes from rheumatoid arthritis patients using two-dimensional electrophoresis. Scandinavian Journal of Clinical and Laboratory Investigation. Supplement 46(184): 77-83

Smith, P.J.S.; Haydon, P.G.; Hengstenberg, A.; Jung, S.K. 2001: Analysis of cellular boundary layers: application of electrochemical microsensors. Emt-3 Electrochemical Microsystem Technologies. International Symposium 47(1-2): 283-292

Zieba, P.; Pawowski, A. 1986: Analysis of cellular dissolution model - Analyse du modèle de dissolution cellulaire. Scripta Metallurgica 20(12): 1653-1656

Auer, G.; Sand, S.; Dammann, A.; Kaiser, S. 2004: Analysis of cellular interference for MC-CDMA and its impact on channel estimation. European Transactions on Telecommunications 15(3): 173-184

Angot, F.; Elmoataz, A.; Revenu, M.; Herlin, P. 1996: Analysis of cellular microscopy images by means of neighbourhood graphs. Microscopy Microanalysis Microstructures (les Ulis) 7(5-6): 549-556

Feppon, J.M.; Hutchinson, W.B. 2000: Analysis of cellular microstructures in Al-Fe-Si alloy. Materials Congress 200 16(11-12): 1364-1366

Totte, P.; Rodrigues, V.; Yaya, A.; Hamadou, B.; Cisse, O.; Diallo, M.; Niang, M.; Thiaucourt, F.; Dedieu, L. 2008: Analysis of cellular responses to Mycoplasma mycoides subsp. mycoides small colony biotype associated with control of contagious bovine pleuropneumonia. Veterinary Research 39(1): 1-11

Marquet, P.; Rappaz, B.; Charriere, F.; Emery, Y.; Depeursinge, C.; Magistretti, P. 2007: Analysis of cellular structure and dynamics with digital holographic microscopy. Proc. Spie Int. Soc. Opt. Eng: 66330F.1-66330F.5

Van Nifterik, L.; Xu, J.; Laurent, J.L.; Mathieu, J.; Rakoto, C. 1993: Analysis of cellulose and kraft pulp ozonolysis products by anion-exchange chromatography with pulsed amperometric detection. J. Chromatogr 640(1-2): 335-343

Kouznetsov, D.A.; Ivanov, A.A.; Veletsky, P.R. 1996: Analysis of cellulose chemical modification: A potentially promising technique for characterizing archaeological textiles - Analyse des modifications chimiques de la cellulose : Une technique prometteuse pour caractériser les textiles archéologiques. Archaeological Chemistry. Symposium 625: 254-268

Kouznetsov, D.A.; Ivanov, A.A.; Veletsky, P.R. 1996: Analysis of cellulose chemical modification : a potentially promising technique for characterizing cellulose archaeological textiles. Journal of Archaeological Science 23(1): 23-34

Motellier, S.; Richet, C.; Merel, P. 1998: Analysis of cellulose degradation products by capillary electrophoresis. J. Chromatogr 804(1-2): 363-370

Isik, F.; Gumpertz, M.; Bailian, L.I.; Goldfarb, B.; Xuan, S.U.N. 2008: Analysis of cellulose microfibril angle using a linear mixed model in Pinus taeda clones. Canadian Journal of Forest Research 38(6): 1676-1689

Lemberge, P.; Van Espen, P.J.; Vrebos, B.A.R. 2000: Analysis of cement using low-resolution energy-dispersive x-ray fluorescence and partial least-squares regression. X-Ray Spectrometry 29(4): 297-304

Wells, M.R.; Smith, R.C. 1991: Analysis of cementing turbulators. Spe Annual Technical Conference and Exhibition 6(1): 9-15

Hamada, M.; Wu, C.F.J. 1995: Analysis of censored data from fractionated experiments: a Bayesian approach. Journal of the American Statistical Association 90(430): 467-477

Hamada, M.; Wu, C.F.J. 1991: Analysis of censored data from highly fractionated experiments. Technometrics 33(1): 25-38

Bunday, B.D.; Kiri, V.A. 1992: Analysis of censored recidivism data using a proportional hazards-type model. Statistician (London. Print) 41(1): 85-96

Faucett, C.L.; Schenker, N.; Elashoff, R.M. 1998: Analysis of censored survival data with intermittently observed time-dependent binary covariates. Journal of the American Statistical Association 93(442): 427-437

Eggenberger, P.; Charbonnel, C.; Talon, S.; Meynet, G.; Maeder, A.; Carrier, F.; Bourban, G. 2004: Analysis of α Centauri AB including seismic constraints. Astronomy and Astrophysics (Berlin. Print) 417(1): 235-246

Peiwu, Z.H.A.O.; Batta, R. 1999: Analysis of centroid aggregation for the Euclidean distance p-median problem. European Journal of Operational Research 113(1): 147-168

Fominaya, A.; Jouve, N. 1985: Analysis of centromere co-orientation in intervarietal hybrids of common wheat (Triticum aestivum L.), by means of C-banding. Heredity (Edinburgh. Print) 54(3): 367-371

Westheide, J.T.; Becker, J.S.; Jager, R.; Dietze, H.J.; Broekaert, J.A.C. 1996: Analysis of ceramic layers for solid oxide fuel cells by laser ablation inductively coupled plasma mass spectroscopy. J. Anal. At. Spectrom. (Print) 11(9): 661-666

Macias, M. 1987: Analysis of ceramic material behaviour under highly concentrated solar radiation. Nato Advanced Study Institute on Solar Energy Utilization: Fundamentals and Applications (Cesme 1986) (129): 136-144

Lee, M.; Yoo, Y.H. 2001: Analysis of ceramic/metal armour systems. International Journal of Impact Engineering 25(9): 819-829

Snada, S.; Uchida, Y.; Anraku, Y.; Izawa, A.; Iwamori, M.; Nagai, Y. 1987: Analysis of ceramide and monohexaosyl glycolipid derivatives by high-performance liquid chromatography and its application to the determination of the molecular species in tissues. J. Chromatogr 400: 223-231

Youjin, C.H.E.O.N.G.; Nam, S.W.; Samjin, C.H.O.I.; Hoyoung, J.A.N.G.; Park, H.K. 2014: Analysis of cerebral blood flow by pneumatic-valves-controlled microfluidic device: risk assessment of infarction correlated with morphometric variation of cerebral vascular system. Microfluidics and Nanofluidics 17(5): 843-853

Smeda, J.S. 1990: Analysis of cerebrovascular sympathetic nerve density in relation to stroke development in spontaneously hypertensive rats. Stroke (1970) 21(5): 785-789

Hatakoshi, G.; Terashima, K.; Uematsu, Y. 1990: Analysis of Cerenkov-type SHG by analytical method. Trans. Inst. Electron. Commun. Eng. Jpn., Sect. E 73(4): 488-490

Aspnes, D.E. 1986: Analysis of cermet films with large metal packing fractions - Analyse de couches minces de cermet avec de grandes fractions d'amas métalliques. Physical Review. B, Condensed Matter 33(2): 677-682

Borwein, D.; Borwein, J.M.; Shail, R. 1989: Analysis of certain lattice sums. Journal of Mathematical Analysis and Applications 143(1): 126-137

Margolin, B.Z.; Shvetsova, V.A.; Sergeeva, M.A. 1994: Analysis of certain problems of the brittle fracture of bcc metals. Strength of Materials 26(7): 477-491

Katsumi, Y.; Honma, T.; Nakamura, T. 1989: Analysis of cervical instability resulting from laminectomies for removal of spinal cord tumor. Spine (Philadelphia, Pa 1976) 14(11): 1171-1176

Angelie, C. 1993: Analysis of CF3I quasicontinum states. III. The Journal of Chemical Physics 98(12): 9284-9302

Rifkin, R. 1994: Analysis of CFAR performance in Weibull clutter. IEEE Transactions on Aerospace and Electronic Systems 30(2): 315-329

Gandhi, P.P.; Kassam, S.A. 1988: Analysis of CFAR processors in nonhomogeneous background. IEEE Transactions on Aerospace and Electronic Systems 24(4): 427-446

Hanasaki, S.; Nomura, M.; Nishiguchi, T. 1994: Analysis of CFRP cutting by finite element method. International Journal of the Japan Society for Precision Engineering 28(4): 340-341

Hanasaki, S.; Fujiwara, J.; Miyamoto, T.; Matsumoto, G. 1998: Analysis of CFRP cutting by finite element method II. International Journal of the Japan Society for Precision Engineering 32(3): 198-199

Haedir, J.; Zhao, X.L.; Bambach, M.R.; Grzebieta, R.H. 2010: Analysis of CFRP externally-reinforced steel CHS tubular beams. Composite Structures 92(12): 2992-3001

Petek, H.; Nesbitt, D.J.; Darwin, D.C.; Ogilby, P.R.; Moore, C.B.; Ramsay, D.A. 1989: Analysis of CH2 ã 1A1 (1,0,0) and (0,0,1) Coriolis-coupled states, ã 1A1-X~ 3B1 spin-orbit coupling, and the equilibrium structure of CH2 ã 1A1 state. The Journal of Chemical Physics 91(11): 6566-6578

Kabachnik, M.I. 1993: Analysis of CH-acidity or organophosphorus compounds. International Conference on Phosphorus Chemistry 77(1-4): 97-100

Indranath, M.U.K.H.O.P.A.D.H.Y.A.Y.; Lees, R.M.; Johns, J.W.C. 1987: Analysis of CH3OH far infrared laser lines optically pumped by sequence band and isotopic CO2 Lasers. IEEE Journal of Quantum Electronics 23(8): 1378-1384

Matlengiewicz, M.; Giao, N.G.U.Y.E.N.; Nicole, D.; Henzel, N. 2000: Analysis of β-CH2 signals in the 13C NMR spectra of the methyl methacrylate-ethyl acrylate copolymer as a tool for microstructure determination. Journal of Polymer Science. Part A. Polymer Chemistry 38(12): 2147-2155

Petraccone, V.; Pirozzi, B.; Meille, S.V. 1986: Analysis of chain folding in crystalline isotactic polypropylene: the implications of tacticity and crystallographic symmetry. Polymer (Guildford) 27(11): 1665-1668

Shyichuk, A.V.; White, J.R. 2000: Analysis of chain-scission and crosslinking rates in the photo-oxidation of polystyrene. Journal of Applied Polymer Science 77(13): 3015-3023

Sesma, I.; Azpilicueta, L.; Astrain, J.J.; Villadangos, J.; Falcone, F. 2014: Analysis of challenges in the application of deterministic wireless channel modelling in the implementation of WLAN-based indoor location system in large complex scenarios. International Journal of Ad Hoc and Ubiquitous Computing 15(1-3): 171-184

Gilchrist, B.E.; Bilen, S.G.; Choiniere, E.; Gallimore, A.D.; Smith, T.B. 2002: Analysis of chamber simulations of long collecting probes in high-speed dense plasmas. IEEE Transactions on Plasma Science 30(5): 2023-2034

Zonta, D.; Elgamal, A.; Fraser, M.; Priestley, M.J.N. 2008: Analysis of change in dynamic properties of a frame-resistant test building. Engineering Structures 30(1): 183-196

Kawaguchi, T.; Masui, K. 1987: Analysis of change in optical transmission spectra resulting from Ag photodoping in chalcogenide film. Jpn. J. Appl. Phys 26(1): 15-21

Hayashi, M.; Yanagi, T. 2008: Analysis of change of red tide species in Yodo River estuary by the numerical ecosystem model. Mar. Pollut. Bull 57(1-5): 103-107

Fayek, A.R.; Nkuah, M.Y. 2002: Analysis of change order markup allowances on stipulated price building contracts - Analyse des indemnités dans la majoration d'un changement de commande sur les contrats à prix fixes. Cost Engineering (Morgantown, W. Va.) 44(1): 28-31

Chung, E.P.; Herts, B.R.; Linnell, G.; Novick, A.C.; Obuchowski, N.; Coll, D.M.; Baker, M.E. 2004: Analysis of changes in attenuation of proven renal cysts on different scanning phases of triphasic MDCT. 2000 Annual Meeting of the American Roentgen Ray Society (Washington, Dc) 182(2): 405-410

Kang, K.; Pelow, C.; Witham, L. 2008: Analysis of changes in 3D surface texture anisotropy ratio parameter and friction during sheet rolling campaigns. Wear 264(5-6): 434-438

Roskosz, M.; Gawrilenko, P. 2008: Analysis of changes in residual magnetic field in loaded notched samples. Ndt and e International 41(7): 570-576

Glinchuk, K.D.; Prokhorovich, A.V.; Vorobkalo, F.M. 1998: Analysis of changes in the intensity of the intrinsic luminescence after the copper diffusion into semi-insulating undoped GaAs crystals. Crystal Research and Technology (1979) 33(5): 833-839

Molnar, P.; Densmore, A.L.; Mcardell, B.W.; Turowski, J.M.; Burlando, P. 2010: Analysis of changes in the step-pool morphology and channel profile of a steep mountain stream following a large flood. Geomorphology (Amsterdam) 124(1-2): 85-94

Zhongren, Z.H.O.U.; Wenliang, W.U.; Xiaohua, W.A.N.G.; Qun, C.H.E.N.; Ou, W.A.N.G. 2009: Analysis of changes in the structure of rural household energy consumption in northern China : A case study. Renewable and Sustainable Energy Review 13(1): 176-182

Noges, P.; Mischke, U.; Laugaste, R.; Solimini, A.G. 2010: Analysis of changes over 44 years in the phytoplankton of Lake Võrtsjärv (Estonia): the effect of nutrients, climate and the investigator on phytoplankton-based water quality indices. Hydrobiologia (Hague) 646: 33-48

Yang, H.C.; Sasankan, S. 2008: Analysis of Channel-Adaptive Packet Transmission Over Fading Channels With Transmit Buffer Management. IEEE Transactions on Vehicular Technology 57(1): 404-413

Karasek, M.; Kanka, J.; Radii, J. 2004: Analysis of channel addition/removal response in all-optical gain-clamped cascade of lumped Raman fiber amplifiers. Journal of Lightwave Technology 22(10): 2271-2278

Karasek, M.; Valles, J.A. 1998: Analysis of channel addition/removal response in all-optical gain-controlled cascade of erbium-doped fiber amplifiers. Journal of Lightwave Technology 16(10): 1795-1803

Wenfeng, D.U.; Weijia, J.I.A.; Guojun, W.A.N.G.; Wenyan, L.U. 2009: Analysis of channel allocation scheme for wireless cellular networks : Wireless and mobile networking. International Journal of Ad Hoc and Ubiquitous Computing 4(3-4): 201-209

Alejos, A.V.; Sanchez, M.G.; Cuinas, I. 2011: Analysis of channel capacity for fixed broadband multimedia systems at 40 GHz. Iet Microwaves, Antennas and Propagation 5(6): 637-643

Ellsaesser, C.F.; Miller, N.W.; Cuchens, M.A.; Lobb, C.J.; Clem, L.W. 1985: Analysis of channel catfish peripheral blood leucocytes by bright-field microscopy and flow cytometry. Transactions of the American Fisheries Society (1900) 114(2): 279-285

Thorne, C.R. 1991: Analysis of channel instability due to catchment land-use change. Iahs-Aish Publ (203): 111-122

Carvalho, O.A.; Guimaraes, R.F.; Santos, N.B.F.; Martins, E.S.; Gomes, R.A.T.; Shimabukuro, Y.E. 2010: Analysis of channel morphology of São Francisco River using remote sensing data. International Journal of Remote Sensing 31(7-8): 1981-1994

Illyashenkoraguin, L.N. 2008: Analysis of channel plasmon-polariton nanoantennas based on a meshless boundary integral equation approach. Proc. Spie Int. Soc. Opt. Eng: 69870X.1-69870X.8

Chen, Y.T.; Fang, W.F.; Liu, Y.C.; Yang, J.T. 2011: Analysis of chaos and FRET reaction in split-and-recombine microreactors. Microfluidics and Nanofluidics 11(3): 339-352

Moiseyev, N.; Brown, R.C.; Wyatt, R.E.; Tzidoni, E. 1986: Analysis of chaotic eigenfunctions by the natural expansion method. Chemical Physics Letters 127(1): 37-44

Chang, C.J.; Lahey, R.T. 1997: Analysis of chaotic instabilities in boiling systems. Nuclear Engineering and Design 167(3): 307-334

Litak, G.; Bernardini, D.; Syta, A.; Rega, G.; Rysak, A. 2013: Analysis of chaotic non-isothermal solutions of thermomechanical shape memory oscillators. The European Physical Journal. Special Topics 222(7): 1637-1647

Rempel, E.L.; Chian, A.C.L.; Macau, E.E.N.; Rosa, R.R. 2004: Analysis of chaotic saddles in low-dimensional dynamical systems: the derivative nonlinear Schrödinger equation. Physica. D 199(3-4): 407-424

Crane, T.B.; Yee, R.D.; Baloh, R.W.; Hepler, R.S. 1983: Analysis of characteristic eye movement abnormalities in intranuclear ophthalmoplegia. Archives of Ophthalmology (1960) 101(2): 206-210

Lijuan, Y.U.; Fei, D.I.N.G.; Hui, Y.E. 2012: Analysis of characteristic flavour compounds in Chinese rice wines and representative fungi in wheat Qu samples from different regions. Journal of the Institute of Brewing 118(1): 114-119

Yoshida, Y.; Watanabe, H.; Shibata, K.; Takemoto, A.; Higuchi, H. 1998: Analysis of characteristic temperature for InGaAsP BH lasers with p-n-p-n blocking layers using two-dimensional device simulator. IEEE Journal of Quantum Electronics 34(7): 1257-1262

Aamodt, L.C.; Spicer, J.W.M.; Murphy, J.C. 1990: Analysis of characteristic thermal transit times for time-resolved infrared radiometry studies of multilayered coatings. Journal of Applied Physics 68(12): 6087-6098

Park, S. 2009: Analysis of characteristics and trends of Web queries submitted to NAVER, a major Korean search engine. Library and Information Science Research 31(2): 126-133

Ishino, R.; Sunahata, M.; Takada, S.; Takemoto, Y. 2002: Analysis of characteristics of a magnetostrictive torque sensor with helical knurls. Ieee Trans. Magn 38(5): 3306-3308

Yamanishi, T.; Okuno, K.; Naruse, Y.; Sada, E. 1993: Analysis of characteristics of cryogenic distillation column in separation of hydrogen isotopes. Journal of Chemical Engineering of Japan 26(1): 1-6

Srinivasan, S.K. 1986: Analysis of characteristics of light generated by a space-charge-limited electron stream. Optica Acta 33(2): 207-211

Ghafoorishiraz, H. 1987: Analysis of characteristics of long-wavelenght semiconductor laser diode amplifiers. Optical and Quantum Electronics 19(5): 303-311

Pengcheng, L.I.; Qiongfang, L.I.; Xianglin, Z.O.U. 2011: Analysis of characteristics of precipitation variations in the Beijing-Tianjin-Tangshan region. Iahs-Aish Publ 350: 60-66

Beck, R.B.; Ruzyllo, J. 1986: Analysis of characteristics of silicon metal/insulator semiconductor tunnel diodes with D.C.-plasma-grown oxide. Thin Solid Films 136(2): 173-180

Liyuan, N.I.U.; Chang, S.H.; Xian, T.O.N.G.; Guangyu, L.I.; Zimu, S.H.I. 2014: Analysis of characteristics of vanadate conversion coating on the surface of magnesium alloy. Journal of Alloys and Compounds 617: 214-218

Junfeng, S.O.N.G.; Yanping, F.U.; Yang, L.I.U.; Yuchun, C.H.A.N.G.; Bonan, K.A.N.G.; Jingzhi, Y.I.N.; Xuemei, L.I.; Guotong, D.U. 2000: Analysis of characteristics of vertical-cavity surface-emitting lasers with a modified rate equation. Opt. Mater. (Amst.) 14(3): 217-221

Aoki, I. 2000: Analysis of characteristics of water flash evaporation under low-pressure conditions. Heat Transfer, Asian Research 29(1): 22-33

Cichocki, O. 2007: Analysis of Charcoal Samples from Early Bronze Age Strata at tell Arqa : Tell Arqa - Analyse des Échantillons de Charbon de Bois des Strates de l'âge du Bronze Ancien À tell Arqa. Archaeology and History in Lebanon (26-27): 99-109

Donolato, C. 1988: Analysis of charge-collection efficiency measurements in Schottky diodes. Solid-State Electronics 31(11): 1587-1594

Jianming, F.U.; Kim, J.; Gallagher, M.C.; Willis, R.F.; Miller, D.L. 1994: Analysis of charge-compensating defects on the GaAs(111)B(2×2) surface. Surface Science 318(3): 349-357

Roh, Y.; Trombetta, L.; Han, J. 1995: Analysis of charge components induced by Fowler-Nordheim tunnel injection in silicon oxides prepared by rapid thermal oxidation. Journal of the Electrochemical Society 142(3): 1015-1020

Yuji, A.N.D.O.; Itoh, T. 1988: Analysis of charge control in Pseudomorphic two-dimensional electron gas field-effect transistors. Ieee Trans. Electron Devices 35(12): 2295-2301

Qiang, C.H.E.N.; Willander, M. 1991: Analysis of charge control in Si delta-doped field-effect transistor. Journal of Applied Physics 69(12): 8233-8236

Karukstis, K.K.; Berliner, M.A.; Kuwata, K.T. 1990: Analysis of π charge distribution in substitued anthraquinones to assess affinity for the QB binding site. Biochimica et Biophysica Acta. Bioenergetics 1020(2): 169-175

Miura, Y.; Matsumoto, H.; Kawakami, T.; Konoshima, S.; Maeno, M.; Matoba, T.; Ohasa, K.; Ohtsuka, H.; Ogawa, H.; Ogawa, T.; Sengoku, S.; Shoji, T.; Kimura, H.; Sugie, T.; Suzuki, N.; Uesugi, Y.; Yamauchi, T.; Yamamoto, S.; Yamamoto, T.; Odajima, K. 1984: Analysis of charge-exchange spectra during ICRF heating in the JFT-2 Tokamak. Nuclear Fusion 24(2): 211-218

Wong, B.T. 2012: Analysis of charge, momentum and energy transfer by an impinging sub-KeV electron beam on a conductor via Monte Carlo simulation including secondary-electron generation. International Journal of Heat and Mass Transfer 55(23-24): 7188-7198

Senda, K.; Terakawa, S.; Hiroshima, Y.; Kunii, T. 1984: Analysis of charge-priming transfer efficiency in CPD image sensors. Ieee Trans. Electron Devices 31(9): 1324-1328

Veksler, D.; Bersuker, G.; Koudymov, A.; Liehr, M. 2013: Analysis of Charge-Pumping Data for Identification of Dielectric Defects. Ieee Trans. Electron Devices 60(5): 1514-1522

Tucker, R.C.; Song, I.; Payer, J.H.; Marchant, R.E. 1997: Analysis of charge rejection by an ionomeric plasma polymerized film for biomedical sensor applications. Journal of Applied Electrochemistry 27(9): 1079-1087

Metzger, W.K.; Ahrenkiel, R.K.; Dashdorj, J.; Friedman, D.J. 2005: Analysis of charge separation dynamics in a semiconductor junction. Physical Review B. Condensed Matter and Materials Physics 71(3): 035301.1-035301.9

Rana, K.; Kucukayandogu, G.; Sener Sen, H.; Boothroyd, C.; Gulseren, O.; Bengu, E. 2012: Analysis of Charge Transfer for in Situ Li Intercalated Carbon Nanotubes. Journal of Physical Chemistry. C 116(20): 11364-11369

Thurzo, I.; Mendez, H.; Zahn, D.R.T. 2005: Analysis of charge transient spectroscopy data originating from Gaussian densities of electron states in organics. Physica Status Solidi. A. Applied Research 202(10): 1994-2007

Grzeszczuk, M.; Poks, P. 1995: Analysis of charge transport impedance in the reduction of thin films of conducting polyaniline in aqueous trichloroacetic acid solutions. Journal of Electroanalytical Chemistry (1992) 387(1-2): 79-85

Quinn, A.J.; Biancardo, M.; Floyd, L.; Belloni, M.; Ashton, P.R.; Preece, J.A.; Bignozzi, C.A.; Redmond, G. 2005: Analysis of charge transport in arrays of 28 kDa nanocrystal gold molecules. Journal of Material Chemistry 15(41): 4403-4407

Wenzel, W.; Kwiatkowski, J.J.; Nelson, J.; Li, H.; Bredas, J.L.; Lennartz, C. 2008: Analysis of charge transport path ways in disordered organic conductors. Proc. Spie Int. Soc. Opt. Eng 6999: 699918.1-699918.13

Tanaka, Y.; Kishimoto, Y.; Terabe, S. 1998: Analysis of charged cyclodextrin derivatives by on-line capillary electrophoresis-ionspray-mass spectrometry. Analytical Sciences 14(2): 383-388

Wang, X.; Amoruso, S.; Tortora, A.; Armenante, M.; Bruzzese, R.; Velotta, R.; Spinelli, N. 2002: Analysis of charged fragments emitted during excimer laser ablation of YNi2B2C borocarbide targets by time-of-flight mass spectrometry. Appl. Surf. Sci 186(1-4): 303-308

Yoshitomi, H.; Koizumi, T.; Muroyama, K.; Hayashi, S.; Ojima, H. 1988: Analysis of charging and blowdown processes in an air-powered fluidic pump driving system. The Journal of Fluid Control 18(4): 7-27

Neagu, E.R.; Neagu, R.M. 1994: Analysis of charging and discharging currents in polyethyleneterephthalate. Physica Status Solidi. A. Applied Research 144(2): 429-440

Kotera, M.; Yamaguchi, S.; Umegaki, S.; Suga, H. 1994: Analysis of charging effect during observation of trench structures by scanning electron microscope. Jpn. J. Appl. Phys 33(12B): 7144-7147

Maltoni, F.; Spengler, J.; Massa, I.; Piccinini, M.; Semprinicesari, N.; Spighi, R.; Villa, M.; Vitale, A.; Zoccoli, A.; Bargiotti, M.; Berlin, A.; Bruschi, M.; De Castro, S.; Fabbri, L.; Faccioli, P.; Giacobbe, B.; Grimaldi, F. 2006: Analysis of charmonium production at fixed-target experiments in the NRQCD approach. Physics Letters. Section B 638(2-3): 202-208

Gardner, W.M.; Roper, J.T.; Gonzalez, C.C.; Simpson, R.G. 1988: Analysis of cheating on academic assignment. The Psychological Record 38(4): 543-555

Bressan, N.; Quarteroni, A. 1986: Analysis of Chebyshev collocation methods for parabolic equations. Siam Journal on Numerical Analysis 23(6): 1138-1154

Bamigbola, O.M.; Ibiejugba, M.A.; Evans, D.J. 1996: Analysis of Chebyshev finite element method for linear differential equations using equal interval elements. International Journal of Computer Mathematics 62(1-2): 113-130

Bamigbola, O.M.; Ibiejugba, M.A.; Evans, D.J. 1997: Analysis of Chebyshev finite element method for nonlinear differential equations. International Journal of Computer Mathematics 65(3-4): 309-320

Ziv, A.; Bruck, J. 1998: Analysis of checkpointing schemes with task duplication. IEEE Transactions on Computers 47(2): 222-227

Saxena, N.R.; Mccluskey, E.J. 1990: Analysis of checksums, extended-precision checksums, and cyclic redundancy checks. IEEE Transactions on Computers 39(7): 969-975

Ko, S.; Gunasekaran, S. 2008: Analysis of cheese melt profile using inverse-Hill function. Journal of Food Engineering 87(2): 266-273

Farrell, F.M.; Fitch, T.M.; Bicking, M.K.L. 2011: Analysis of Chemical and Physical Effects of Ultraviolet Bulbs on Cooking Emissions. Journal of the Air and Waste Management Association (1995) 61(10): 1005-1014

Yuxi, J.I.A.; Guofang, Z.H.A.N.G.; Lili, W.U.; Sheng, S.U.N.; Guoqun, Z.H.A.O.; Lijia, A.N. 2007: Analysis of chemical calorific effect during reactive extrusion processes for free radical polymerization. Polymer International 56(12): 1553-1557

Sato, H.; Takeuchi, H.; Tanaka, Y. 1986: Analysis of chemical composition distribution of styrene-methyl methacrylate copolymer by high-performance liquid chromatography. Macromolecules 19(10): 2613-2617

Ke, R.U.I.D.I.A.N.; Lin, S.H.U.N.F.A.; Chen, Y.I.; Ji, C.H.U.R.O.N.G.; Shu, Q.I.A.G.U.A.N.G. 2010: Analysis of chemical composition of polysaccharides from Poria cocos Wolf and its anti-tumor activity by NMR spectroscopy. Carbohydrate Polymers 80(1): 31-34

Sakairi, M.; Otani, K.; Kaneko, A.; Seki, Y.; Nagasawa, D. 2013: Analysis of chemical compositions and morphology of surface films formed on 3003 aluminum alloy by immersion in different cation containing model tap waters. International Aluminium Surface Science and Technology Symposium 45(10): 1517-1521

Owens, J.E.; Niemeyer, E.D. 2006: Analysis of chemical contamination within a canal in a Mexican border colonia. Environmental Pollution (1987) 140(3): 506-515

De Moraes, I.R.; Scholz, S.; Lussem, B.; Leo, K. 2011: Analysis of chemical degradation mechanism within sky blue phosphorescent organic light emitting diodes by laser-desorption/ionization time-of-flight mass spectrometry. Organic Electronics 12(2): 341-347

Brannon, J.H. 2000: Analysis of chemical degradation products in an e-beam pumped rare-gas halide laser. Spie Milestone Series 159: 337-340

Vrublevsky, I.; Parkoun, V.; Sokol, V.; Schreckenbach, J. 2005: Analysis of chemical dissolution of the barrier layer of porous oxide on aluminum thin films using a re-anodizing technique. Applied Surface Analysis Workshop 252(1): 227-233

Wightman, R.M.; Runnels, P.; Troyer, K. 1999: Analysis of chemical dynamics in microenvironments. Anal. Chim. Acta 400(1-3): 5-12

Andresen, P.; Rothe, E.W. 1985: Analysis of chemical dynamics via Λ doubling: directed lobes in product molecules and transition states. The Journal of Chemical Physics 82(8): 3634-3640

Gray, B.F.; Roberts, M.J. 1988: Analysis of chemical kinetic systems over the entire parameter space. I: The Sal'nikov thermokinetic oscillator. Proceedings of the Royal Society of London, Series a : Mathematical and Physical Sciences 416(1851): 391-402

Gray, B.F.; Roberts, M.J. 1988: Analysis of chemical kinetic systems over the entire parameter space. II: Isothermal oscillators. Proceedings of the Royal Society of London, Series a : Mathematical and Physical Sciences 416(1851): 403-424

Gray, B.F. 1990: Analysis of chemical kinetic systems over the entire parameter space. III, A wet combustion system. Proceedings of the Royal Society of London, Series a : Mathematical and Physical Sciences 429(1877): 449-458

Gray, B.F.; Forbes, L.K. 1994: Analysis of chemical kinetic systems over the entire parameter space. IV: The Sal'nikov oscillator with two temperature-dependent reaction rates. Proceedings - Royal Society. Mathematical and Physical Sciences 444(1922): 621-642

Panesi, M.; Rini, P.; Degrez, G.; Chazot, O. 2007: Analysis of chemical nonequilibrium and elemental demixing in plasmatron facility. J. Thermophys. Heat Transf 21(1): 57-66

Jinliang, Y.U.A.N.; Fuan, R.E.N.; Sunden, B. 2007: Analysis of chemical-reaction-coupled mass and heat transport phenomena in a methane reformer duct for PEMFCs. International Journal of Heat and Mass Transfer 50(3-4): 687-701

Saito, K.; Kunitomo, K.; Fukuda, K.; Katoh, K.; Komaki, I. 2002: Analysis of chemical reaction in the voids of cokes using NMR gas imaging. Tetsu-To-Hagane 88(10): 651-657

Horno, J.; Gonzalezfernandez, C.F. 1989: Analysis of chemical reaction systems by means of netweork thermodynamics. Collection of Czechoslovak Chemical Communications 54(9): 2335-2344

Locke, B.R.; Thagard, S.M. 2009: Analysis of Chemical Reactions in Gliding-Arc Reactors With Water Spray Into Flowing Oxygen. IEEE International Conference on Plasma Science 37(4): 494-501

Van den Beukel, A. 1986: Analysis of chemical short range ordering in amorphous Fe40Ni40B20 - Analyse de la mise en ordre chimique à courte distance dans l'alliage amorphe Fe40Ni40B20. Journal of Non-Crystalline Solids 83(1-2): 134-140

Nishimura, T.; Kodama, T. 2002: Analysis of chemical state for alloying elements in iron rust. Tetsu-To-Hagane 88(6): 320-325

Seung Koo, P.A.R.K.; Soo Young, P.A.R.K.; Chul Joo, L.E.E. 2000: Analysis of chemical structure of fluoro-containing copolyamic acid methyl esters and its effect on the thermal imidization process. European Polymer Journal 36(12): 2621-2628

Michaelidis, M.; Pollard, R. 1984: Analysis of chemical vapor deposition of boron. Journal of the Electrochemical Society 131(4): 860-868

Creasy, W.R.; Brickhouse, M.D.; Morrissey, K.M.; Stuff, J.R.; Cheicante, R.L.; Ruth, J.; Mays, J.; Williams, B.R.; Oconnor, R.; Durst, H.D. 1999: Analysis of chemical weapons decontamination waste from old ton containers from Johnston atoll using multiple analytical methods. Environmental Science and Technology 33(13): 2157-2162

Hanai, T.; Hatano, H.; Nimura, N.; Kinoshita, T. 1993: Analysis of chemically bonded silica gel by computational chemistry. Journal of Liquid Chromatography 16(1): 109-114

Venema, A.; Sukkel, J.T. 1985: Analysis of chemically modified polystyrenes with pyrolysis-capillary gas chromatography. Hrc and Cc. Journal of high Resolution Chromatography and Chromatography Communications 8(9): 510-513

Schell, F.M.; Burghardt, G.M.; Johnston, A.; Coholich, C. 1990: Analysis of chemicals from earthworms and fish that elicit prey attack by ingestively naive garter snakes (Thamnophis). J. Chem. Ecol 16(1): 67-77

Deng, H.; Ozawa, T.; Levin, D.A. 2012: Analysis of Chemistry Models for DSMC Simulations of the Atmosphere of Io. Journal of Thermophysics and Heat Transfer 26(1): 36-46

Tenglong, C.O.N.G.; Ronghua, C.H.E.N.; Guanghui, S.U.; Suizheng, Q.I.U.; Wenxi, T.I.A.N. 2011: Analysis of CHF in saturated forced convective boiling on a heated surface with impinging jets using artificial neural network and genetic algorithm. Nuclear Engineering and Design 241(9): 3945-3951

Celata, G.P.; Cumo, M.; Setaro, T. 1994: Analysis of CHF location sensibility following heat flux and mass flux variations. International Journal of Heat and Mass Transfer 37(7): 1073-1080

Chenoll, C.; Betoret, N.; Fito, P. 2009: Analysis of chickpea (var. Blanco Lechoso) rehydration. Part I. Physicochemical and texture analysis. Journal of Food Engineering 95(2): 352-358

Kalra, V.; Gouri Rao, P.A.S.S.I. 1998: Analysis of childhood epileptic encephalopathies with regard to etiological and prognostic factors. Brain and Development (Tokyo 1979) 20(1): 14-17

Smoczynska, M. 1986: Analysis of children's errors: some methodological issues. Advances in Psychology 39: 389-413

Jeesuk, Y.U.; Chung Ho, S.H.I.N.; Sei Won, Y.A.N.G.; Myoung Hee, P.A.R.K.; Eisenbarth, G.S. 2004: Analysis of children with type 1 diabetes in Korea: high prevalence of specific anti-islet autoantibodies, immunogenetic similarities to Western populations with unique haplotypes, and lack of discrimination by aspartic acid at position 57 of DQB. Clinical Immunology (Orlando, Fla. Print) 113(3): 318-325

Colin, J.; Gonzalez, C.; Herrera, R.; Juarezlslas, J.A. 2002: Analysis of chill-cast NiAl intermetallic compound with copper additions. Journal of Materials Engineering and Performance 11(5): 487-491

Redina, O.E.; Zhelezova, A.I.; Golubitsa, A.N.; Agulnik, A.I.; Ruvinskii, A.O. 1993: Analysis of chimeric mice carrying the fused mutation. Soviet Genetics 29(8): 980-985

Li, J.U.N.Y.I.N.G. 2000: Analysis of China's natural gas consumption market. China Oil and Gas 7(2): 16-18

Ueda, K.; Manabe, K. 1992: Analysis of chip formation mechanism of β-brass single crystals by rigid-plastic FEM. Nippon Kinzoku Gakkaishi (1952) 56(3): 327-332

Kuhn, M.; Buddrus, J. 1993: Analysis of chiral carboxylic acids by NMR using new optically active amines. Tetrahedron : Asymmetry 4(2): 207-210

Feng, W.W.; Zhu, N.H. 2004: Analysis of chirp characteristics of DFB lasers and integrated laser-modulators. Optical and Quantum Electronics 36(14): 1237-1245

Yamamoto, S.; Kuwazuru, M.; Wakabayashi, H.; Iwamoto, Y. 1987: Analysis of chirp power penalty in 1.55-μm DFB-LD high-speed optical fiber transmission systems. Journal of Lightwave Technology 5(10): 1518-1524

Kim, M.S.; Choi, Y.J.; Han Sang, P.A.R.K.; Noh, I. 2008: Analysis of chitosan irradiated with high-energy cyclotron ion beams. J. Phys. Chem. Solids 69(5-6): 1569-1572

Pavlik, Z.; Pavlikova, M.; Fiala, L.; Benesova, H.; Mihulka, J.; Cerny, R. 2010: Analysis of chloride transport and storage properties of high performance concrete modified by fly ash addition as an effective tool for assessment of its durability. Transactions On The Built Environment v. 112: 343-354

Kitunen, V.; Valo, R.; Salkinojasalonen, M. 1985: Analysis of chlorinated phenols, phenoxyphenols and dibenzofurans around wood preserving facilities. International Journal of Environmental Analytical Chemistry 20(1-2): 13-28

Haga, K.; Asihara, T.; Seki, K. 1993: Analysis of chlorinated polypropylene: 13C NMR signal classification using J-modulation of INEPT. Kobunshi Ronbunshu (Tokyo) 50(3): 169-177

Wagner, K.; Gorner, W.; Hedrich, M.; Jost, P.; Segebade, C. 1998: Analysis of chlorine and other halogens by activation with photons and neutrons. Fresenius' Journal of Analytical Chemistry 362(4): 382-386

Mills, A.; Cook, A. 1987: Analysis of chlorine ― oxygen gas mixtures. Analyst (London 1877. Print) 112(9): 1289-1291

Sturrock, G.A.; Simmonds, P.G.; Nickless, G.; Zwiep, D. 1993: Analysis of chlorofluorocarbon replacement compounds by capillary gas chromatography. Journal of Chromatography 648(2): 423-431

Zeimer, P.P.; Man, E.H. 1983: Analysis of chlorophyll diagenesis. I: Kinetics of the phorbide to porphyrin transition - Diagenèse de la chlorophylle. I. Cinétique de la transition phorbide-porphyrine. Organic Geochemistry 5(1): 43-49

Zelmer, P.P.; Man, E.H. 1984: Analysis of chlorophyll diagenesis. II: Solvent effects on metal incorporation into chlorophyll diagenetic products - Diagenèse de la chlorophylle. II: Effet de solvant sur l'incorporation de métaux dans les produits diagénétiques de la chlorophylle. Organic Geochemistry 7(3-4): 223-229

Vanselow, K.H.; Kolbowski, J.; Hansen, U.P. 1989: Analysis of chlorophyll fluorescence by means of noisy light. Journal of Experimental Botany 40(211): 247-256

Di Pietra, A.M.; Bonazzi, D.; Cavrini, V. 1992: Analysis of chlorpropamide, tolbutamid and their related sulphonamide impurities by liquid chromatography (HPLC). Farmaco (Pavia) 47(5): 787-797

Li, Y.M.; Moons, H.; Van Schepdael, A.; Roets, E.; Hoogmartens, J. 1998: Analysis of chlortetracycline and related substances by capillary zone electrophoresis : Development and validation. Chromatographia (Wiesbaden) 48(7-8): 576-580

Thelwall, P.E.; Brindle, K.M. 1999: Analysis of CHO-K1 cell growth in a fixed bed bioreactor using magnetic resonance spectroscopy and imaging. Cytotechnology (Dordr.) 30(1-3): 121-132

Mukherjee, P.S.; Karnes, H.T. 1996: Analysis of γ-(cholesteryloxy)butyric acid in biologic samples by derivatization with 5-(bromomethyl)fluorescein followed by high-performance liquid chromatography with laser-induced fluorescence detection. Analytical Chemistry 68(2): 327-332

Tsuji, T.; Matsuyama, Y.; Natsume, N.; Hasegawa, Y.; Kondo, S.; Kawakami, H.; Yoshihara, H.; Iwata, H. 2002: Analysis of chondrex (YKL-40, HC gp-39) in the cerebrospinal fluid of patients with spine disease. Spine (Philadelphia, Pa 1976) 27(7): 732-735

Kreuzer, E.J. 1985: Analysis of chootic systems using the cell mapping approach. Ingenieur-Archiv 55(4): 285-294

Hoogeveen, J.A. 1991: Analysis of Christofides' heuristic : some paths are more difficult than cycles. Operations Research Letters 10(5): 291-295

Mohammed Nazrul, I.S.L.A.M.; Sasaki, T.; Imai, M.; Satya Prasad, M.A.J.U.M.D.E.R.; Namihira, Y. 1999: Analysis of chromatic dispersion effect on coherent optical CPFSK system and performance improvement with the use of combinations of various optical fibers. Optics Communications 160(4-6): 219-224

Lee, K.H.; Choi, H.Y.; Choi, W.Y. 2003: Analysis of chromatic dispersion-induced second-harmonic distortions including laser dynamics to the second order. IEEE Journal of Quantum Electronics 39(5): 640-646

Oscikmendyk, B.; Rozyo, J.K. 1987: Analysis of chromatographic parameters in the systems with ternary mobile phases. Journal of Liquid Chromatography 10(7): 1399-1415

Oscikmendyk, B. 1989: Analysis of chromatographic parameters in the systems with ternary mobile phases. II: Two polar solvents in mobile phase. Journal of Liquid Chromatography 12(6): 891-906

Ehrling, C.; Schmidt, U.; Liebscher, H. 1996: Analysis of chromium(III)-fluoride-complexes by ion chromatography. Fresenius' J. Anal. Chem 354(7-8): 870-873

Watanabe, K. 2003: Analysis of chromium plating solution. Hyomen Gijutsu 54(11): 784-786

Shawn Heberling, S.; Campbell, D.; Carson, S. 1990: Analysis of chromium plating solutions and wastewaters by ion chromatography. Plating and Surface Finishing 77(11): 58-62

Lefor, A.T.; Steinberg, S.M.; Wiebke, E.A. 1988: Analysis of chromium-51 release assay data using personal computer speadsheet software. Computers and Biomedical Research 21(3): 268-275

Newman, S.M.; Derocher, J.; Cattolico, R.A. 1989: Analysis of chromophytic and rhodophytic ribulose-1,5-bisphosphate carboxylase indicates extensive structural and functional similarities among evolutionary diverse algae. Plant Physiology (Bethesda) 91(3): 939-946

Stobetsky, V.L.; Chebotarev, A.N.; Mironova, L.L. 1994: Analysis of chromosome combinations in dicentrics at the induced telomeric fusion. Citologia 36(1): 60-63

Zhirov, E.G.; Ternovskaya, T.K. 1993: Analysis of chromosome conjugation in wheat hybrids and the origin of their genomes: diploid hybrids. Soviet Genetics 29(1): 104-111

Zhirov, E.G.; Ternovskaya, T.K. 1993: Analysis of chromosome conjugation in wheat hybrids and the origin of their genomes: tetraploid hybrids. Soviet Genetics 29(1): 120-128

Zhirov, E.G.; Ternovskaya, T.K. 1993: Analysis of chromosome conjugation in wheat hybrids and the origin of their genomes: triploid hybrids. Soviet Genetics 29(1): 112-119

Coon, H.; Hoff, M.; Holik, J.; Hadley, D.; Fang, N.; Reimherr, F.; Wender, P.; Byerley, W. 1996: Analysis of chromosome 18 DNA markers in multiplex pedigrees with manic depression. Biological Psychiatry (1969) 39(8): 689-696

Marzano, R.; Corrado, G.; Cianciulli, A.M.; Merola, R.; Sbiroli, C.; Guadagni, F.; Vizza, E.; Del Nonno, F.; Carosi, M.; Galati, M.M.; Sperduti, I. 2004: Analysis of chromosomes 3, 7, X and the EGFR gene in uterine cervical cancer progression. European Journal of Cancer (1990) 40(10): 1624-1629

Foster, R.D.; Groves, J.A. 1988: Analysis of Chrysoidine dyes using high-performance thin-layer chromatography and a proposed method for the measurement of Chrysoidine Y and R in air samples. Analyst (London 1877. Print) 113(11): 1613-1623

Kawata, J.; Nishio, Y.; Ushida, A. 1997: Analysis of Chua's circuit with transmission line. IEEE Transactions on Circuits and Systems 1, Fundamental Theory and Applications 44(6): 556-558

Wu, W.E.N.G.U.A.N.G. 2008: Analysis of Circuit Model for Vertical-cavity surface-emitting Lasers. Proc. Spie Int. Soc. Opt. Eng 6824: 68241J.1-68241J.5

Gallawa, R.L.; Yinggang, T.U. 1989: Analysis of circular bends in planar optical waveguides. Fiber and Integrated Optics 8(2): 87-97

Zhang, Q.; Beale, D.; Broughton, R.M.; Adanur, S. 1999: Analysis of circular braiding process. Part 2 : Mechanics analysis of the circular braiding process and experiment. Journal of Manufacturing Science and Engineering 121(3): 351-359

Zhang, Q.; Beale, D.; Broughton, R.M. 1999: Analysis of circular braiding process. Part 1 : Theoretical investigation of kinematics of the circular braiding process. Journal of Manufacturing Science and Engineering 121(3): 345-350

Lech, R.; Mazur, J. 2007: Analysis of circular cavity with cylindrical objects. IEEE Transactions on Microwave Theory and Techniques 55(10): 2115-2123

Jianguo, X.I.A.O.; Keqian, Z.H.A.N.G. 1998: Analysis of circular chiral dielectric waveguides. International Journal of Infrared and Millimeter Waves 19(3): 511-527

Xu, C.H.A.N.G.; Xulin, L.U.O.; Changxing, Z.H.U.; Chunan, T.A.N.G. 2014: Analysis of circular concrete-filled steel tube (CFT) support in high ground stress conditions. Tunnelling and Underground Space Technology 43: 41-48

Sanders, J.L. 1983: Analysis of circular cylindrical shells. Journal of Applied Mechanics 50(4B): 1165-1170

Salahifar, R.; Mohareb, M. 2010: Analysis of circular cylindrical shells under harmonic forces. Thin-Walled Structures 48(7): 528-539

Shafai, L.; Kishk, A.A. 1989: Analysis of circular microstrip antennas. Iee Electromagnetic Waves Series 1: 45-109

Luk, K.M.; Tam, W.Y.; Yip, C.L. 1989: Analysis of circular microstrip antennas with superstrate. Iee Proceedings. Part H. Microwaves, Antennas and Propagation 136(3): 261-262

Bhattacharyya, A.K. 1991: Analysis of circular patch antennas on electrically thick substrates. Computer Physics Communications 68(1-3): 485-495

Mandal, J.J.; Ghosh, D.P. 1998: Analysis of circular plate on elastic half-space - a coupled FE-BE approach. Indian Geotechnical Journal 28(4): 339-358

Theofanous, N. 1995: Analysis of circular-polarization electrooptic amplitude modulators. IEEE Journal of Quantum Electronics 31(7): 1315-1325

Losada, V.; Boix, R.R.; Horno, M. 1998: Analysis of circular stripline resonators on normally biased ferrite substrates. IEEE Microwave and Guided Wave Letters 8(6): 226-228

Girija Vallabhan, C.V.; Das, Y.C. 1991: Analysis of circular tank foundations. Journal of Engineering Mechanics 117(4): 789-797

Kato, N.; Tsutsumi, M.; Sato, R. 2013: Analysis of circular trajectory equivalent to cone-frustum milling in five-axis machining centers using motion simulator. International Journal of Machine Tools and Manufacture 64: 1-11

Marchetti, M.E.; Capra, A.J.C. 1986: Analysis of circular tunnels in soft ground. Tunnels and Tunnelling 18(10): 45-48

Platonov, N.I. 1993: Analysis of circular waveguide with infinitely thin combs. Journal of Communications Technology and Electronics 38(5): 123-127

Min, C.; Free, C.E. 2009: Analysis of circularly polarised dual-ring microstrip patch array using hybrid feed. Iet Microwaves, Antennas and Propagation 3(3): 465-472

Loginov, D.A.; Mochan, S.I.; Sidorov, V.V. 1992: Analysis of circulation reliability in supercritical drum boilers. Thermal Engineering 39(8): 436-438

Malik, A.M.; Qureshi, E.M.; Naeem Ullah, D.A.R.; Khan, I. 2008: Analysis of circumferentially arc welded thin-walled cylinders to investigate the residual stress fields. Thin-Walled Structures 46(12): 1391-1401

Malik, A.M.; Oureshi, E.M.; Dar, N.U.; Khan, I. 2008: Analysis of circumferentially welded thin-walled cylinders to investigate the effects of varying clamping conditions. Proceedings of the Institution of Mechanical Engineers. Part B. Journal of Engineering Manufacture 222(7): 901-914

Rieckmann, P.; Wilson, G.L.; Thevenin, C.; Jinxin, H.O.N.G.; Kehrl, J.H. 1991: Analysis of cis-acting elements present in the CD20/B1 antigen promoter. The Journal of Immunology (1950) 147(11): 3994-3999

Lemaigre, F.P.; Courtois, S.J.; Durviaux, S.M.; Egan, C.J.; Lafontaine, D.A.; Rousseau, G.G. 1989: Analysis of cis- and trans-acting elements in the hormone-sensitive human somatotropin. Journal of Steroid Biochemistry. International Symposium . 9 34(1-6): 79-83

Hillig, K.W.; Kuczkowski, R.L.; Cremer, D. 1984: Analysis of cis-difluoroethylene ozonide by microwave spectroscopy and ab initio techniques: an unusual conformational potential. Journal of Physical Chemistry (1952) 88(10): 2025-2030

Quinto Tranchida, P.; Bonaccorsi, I.; Dugo, P.; Mondello, L.; Dugo, G. 2012: Analysis of Citrus essential oils: state of the art and future perspectives. A review. Flavour and Fragrance Journal 27(2): 98-123

Dai, J.D.; Jen, C.K. 1991: Analysis of cladded uniaxial single-crystal fibers. Journal of the Optical Society of America. A, Optics and Image Science 8(12): 2021-2025

Dalaei, M.; Kerr, A.D. 1995: Analysis of clamped rectangular orthotropic plates subjected to a uniform lateral load. International Journal of Mechanical Sciences 37(5): 527-535

Kazimierczuk, M.K.; Szaraniek, W. 1993: Analysis of class E low di/dt rectifier with a series inductor. IEEE Transactions on Aerospace and Electronic Systems 29(1): 278-287

Kazimierczuk, M.K. 1990: Analysis of class E zero-voltage-switching rectifier. IEEE Transactions on Circuits and Systems 37(6): 747-755

Misra, D.N.; Kunz, H.W.; Gill T J, I.I.I. 1985: Analysis of class I MHC antigens in the rat by monoclonal antibodies. The Journal of Immunology (1950) 134(4): 2520-2528

Bo, C.H.E.N. 1995: Analysis of classes of heuristics for scheduling a two-stage flow shop with parallel machines at one stage. The Journal of the Operational Research Society 46(2): 234-244

Bansal, B.; Xiao Dong, C.H.E.N.; Mullersteinhagen, H. 2008: Analysis of 'classical' deposition rate law for crystallisation fouling. Chemical Engineering and Processing 47(8): 1201-1210

Weinberg, G.V. 2013: Analysis of classical incoherent integrator radar detectors in compound Gaussian clutter. Electronics Letters 49(3): 213-215

Seunghyun, C.H.U.N.; Kwasinski, A. 2011: Analysis of Classical Root-Finding Methods Applied to Digital Maximum Power Point Tracking for Sustainable Photovoltaic Energy Generation. IEEE Transactions on Power Electronics 26(11-12): 3730-3743

Lukin, V.; Abramov, S.; Krivenko, S.; Kurekin, A.; Pogrebnyak, O. 2013: Analysis of classification accuracy for pre-filtered multichannel remote sensing data. Expert Systems with Applications 40(16): 6400-6411

Xin, Z.H.U.A.N.G.; Engel, B.A.; Xiaoping, X.I.O.N.G.; Johannsen, C.J. 1995: Analysis of classification results of remotely sensed data and evaluation of classification algorithms. Photogrammetric Engineering and Remote Sensing 61(4): 427-433

Okada, Y.; Kawase, Y.; Hisamatsu, Y. 2003: Analysis of claw-poled permanent magnet-stepping motor considering deterioration of material characteristics by remains stress. Ieee Trans. Magn 39(3): 1721-1724

Gadsden, R.J.; Kanji, G.K. 1983: Analysis of clay strata orientations - Analyse de l'orientation des couches argileuses. Statistician (London. Print) 32(3): 289-296

Grumgrzhimailo, O.S. 1996: Analysis of clays from new deposits. Glass and Ceramics 53(3-4): 82-83

Almecija, M.C.; Zapata, J.E.; Martinezferez, A.; Guadix, A.; Hemdndez, A.; Calvo, J.I.; Guadix, E.M. 2009: Analysis of cleaning protocols in ceramic membranes by liquid-liquid displacement porosimetry. Desalination (Amst.) 245(1-3): 541-545

Garrison, J.; Kamran, S.A.H.A.M.I. 1995: Analysis of clear hour solar irradiation for seven Canadian stations. Solar Energy 55(6): 505-512

Guven, O.; Melville, J.G.; Curry, J.E. 2002: Analysis of clear-water scour at bridge contractions in cohesive soils. Transportation Research Record (1797): 3-10

Horngtsann, H.U.A.N.G.; Chengi, W.E.N.G.; Chaokuang, C.H.E.N. 1994: Analysis of clearance and rake angles along cutting edge for multifacet drills (MFD). Journal of Engineering for Industry 116(1): 8-16

Odette, G.R.; Lucas, G.E. 1983: Analysis of cleavage fracture potential of martensitic stainless steel fusion structures. Pt. 2:Fracture analysis procedures for flawed fusion structures - Analyse des Trennbruchpotentials von martensitischem nichtrostendem Stahl. T. 2. Journal of Nuclear Materials 117(1-3): 276-286

Odette, G.R.; Lucas, G.E. 1983: Analysis of cleavage fracture potential of martensitic stainless steel fusion structures. Pt. 1:Micromechanical models and material properties - Analyse des Trennbruchpotentials von martensitischem nichtrostendem Stahl. T. 1. Journal of Nuclear Materials 117(1-3): 264-275

Streifer, W.; Yevick, D.; Paoli, T.L.; Burnham, R.D. 1985: Analysis of cleaved coupled-cavity (C3) diode lasers. II: Frequency modulation, above threshold operation, and residual amplitude modulation. IEEE Journal of Quantum Electronics 21(6): 539-550

Jones, J.R.; Cameron, B.; Fisher, J.J. 1993: Analysis of cliff retreat and shoreline erosion: Thompson Island, Massachusetts USA. Journal of Coastal Research 9(1): 87-96

Hua, C.H.E.N.; Jing, G.U.O.; Guo, S.L.; Xu, C.Y.; Singh, V.P. 2009: Analysis of climate change impact on precipitation in Danjiangkou reservoir basin by using statistical downscaling method. Iahs-Aish Publ 335: 291-299

Fabian, A.P.; Matyasovszky, I. 2010: Analysis of climate change in Hungary according to an extended Köppen classification system, 1971―2060. Idojaras (Budapest 1905) 114(4): 251-261

Rada, G.R.; Schwartz, C.W.; Witczak, M.W.; Jafroudi, S. 1989: Analysis of climate effects on performance of unpaved roads - Etude de l'influence du climat sur la performance de routes sans revêtement. Journal of Transportation Engineering 115(4): 389-410

Semlitsch, R.D. 1985: Analysis of climatic factors influencing migrations of the salamander Ambystoma talpoideum. Copeia (2): 477-489

Kassomenos, P.; Kotroni, V.; Kallos, G. 1995: Analysis of climatological and air quality observations from Greater Athens Area. Atmospheric Environment (1994) 29(24): 3671-3688

Cobb, C.H. 1984: Analysis of clinical approximation in applying prentice's rule to decentration of sphero-cylinder lenses. Ophthalmic and Physiological Optics 4(3): 265-273

Aisaka, K.; Yoshida, K.; Mori, H. 1992: Analysis of clinical background and pathogenesis of luteal-phase defect. Horm. Res 37: 41-47

Walley, P.; Gurrin, L.; Burton, P. 1996: Analysis of clinical data using imprecise prior probabilities. Annual Conference on Applied Statistics in Ireland 45(4): 457-485

Franzen, L.; Westin, G.; Shabo, R.; Aslund, L.; Perlmann, H.; Persson, T.; Wigzell, H.; Pettersson, U. 1984: Analysis of clinical specimens by hybridisation with probe containing repetitive DNA from plasmodium falciparum: a novel approach to malaria diagnosis. Lancet (British Edition) (8376): 525-528

Erturk, M.S.; Cicek, Y.; Ersan, Y.; Saribeyoglu, K.; Dogusoy, G.; Erginoz, E. 2003: Analysis of clinicopathological prognostic parameters in adenocarcinoma of the gastric cardia. Acta Chirurgica Belgica (6): 611-615

Luqing, W.A.N.G.; Tellambura, C. 2008: Analysis of Clipping Noise and Tone-Reservation Algorithms for Peak Reduction in OFDM Systems. IEEE Transactions on Vehicular Technology 57(3): 1675-1694

Guldner, J.; Leps, J.P. 2005: Analysis of CLIWA-NET intensive operation period data as part of the monitoring activities at the German Meteorological Service site Lindenberg. Atmospheric Research 75(3): 151-166

Foster, M.P.; Gould, C.R.; Gilbert, A.J.; Stone, D.A.; Bingham, C.M. 2008: Analysis of CLL Voltage-Output Resonant Converters Using Describing Functions. IEEE Transactions on Power Electronics 23(4): 1772-1781

Morris, R.H.; Newton, M.I.; Knowles, P.R.; Bencsik, M.; Davies, P.A.; Griffin, P.; Mchale, G. 2011: Analysis of clogging in constructed wetlands using magnetic resonance. Analyst (London 1877. Print) 136(11): 2283-2286

Groll, M. 1984: Analysis of 700 clomiphene citrate pregnancies. Infertility 7(1-4): 1-12

Enoki, Y.; Niwa, O.; Yokoro, K.; Toge, T. 1990: Analysis of clonal evolution in a tumor consisting of pSV2neo-transfeced mouse fibrosarcoma clones. Jpn. J. Cancer Res 81(2): 141-147

Kavinsky, C.J.; Umeda, P.K.; Levin, J.E.; Sinha, A.M.; Nigro, J.M.; Jakovcic, S.; Rabinowitz, M. 1984: Analysis of cloned mRNA sequences encoding subfragment 2 and part of subfragment 1 of α- and β-myosin heavy chains of rabbit heart. Journal of Biological Chemistry 259(5): 2775-2781

Uchida, K.; Yamashita, H.; Tsumura, Y.; Takahashi, C.; Ohba, K. 1993: Analysis of clones of Nango-hi, a vegetatively propagated cultivar of Chamaecyparis obtusa ENDL. based on isozyme genotypes. Ikushugaku Zasshi 43(2): 219-230

Hirata, T.; Makino, Y.; Kaneko, Y. 1991: Analysis of close-contact melting for octadecane and ice inside isothermally heated horizontal rectangular capsule. International Journal of Heat and Mass Transfer 34(12): 3097-3106

Moallemi, M.K.; Viskanta, R. 1986: Analysis of close-contact melting heat transfer. International Journal of Heat and Mass Transfer 29(6): 855-867

Sinelnikov, N.N.; Mazo, M.A.; Berlin, A.A. 1995: Analysis of close packings for a bicomponent system of disks on a plane. Colloid Journal of the Russian Academy of Sciences 57(6): 809-812

Jianlong, L.I.U.; Jie, L.I.N.; Haifa, Z.H.A.O.; Shutian, L.I.U. 2008: Analysis of closed-boundary cylindrical microlenses with long focal depth designed by the general focal length function. Optics Communications 281(17): 4188-4193

Ozgur, M.; Mullen, R.L.; Welsch, G. 1996: Analysis of closed cell metal composites. Acta Materialia 44(5): 2115-2126

Guzman, J.D.; Schieber, J.D. 2003: Analysis of closed-discharge single-screw extrusion of power-law fluids. Polymer Engineering and Science 43(1): 55-61

Boiko, I. 2007: Analysis of closed-loop performance and frequency-domain design of compensating filters for sliding mode control systems. IEEE Transactions on Automatic Control 52(10): 1882-1891

Shore, K.A. 1984: Analysis of closely-spaced index-guided semiconductor lasers. I: Multistripe devices. Optical and Quantum Electronics 16(3): 235-242

Shore, K.A. 1984: Analysis of closely-spaced index-guided semiconductor lasers. II: Single-stripe channel-guide structures. Optical and Quantum Electronics 16(3): 243-249

Durliat, M.; Vranckx, R. 1983: Analysis of clotting defects in diseased lobsters. I: Alterations in blood parameters. Comparative Biochemistry and Physiology. A. Comparative Physiology 76(1): 95-101

Durliat, M.; Vranckx, R. 1983: Analysis of clotting defects in diseased lobsters. II: Immunochemical study of blood proteins. Comparative Biochemistry and Physiology. A. Comparative Physiology 76(1): 103-108

Aleksic, N.; Roy, K.; Sistla, G.; Dukett, J.; Houck, N.; Casson, P. 2009: Analysis of cloud and precipitation chemistry at Whiteface Mountain, NY. Atmospheric Environment (1994) 43(17): 2709-2716

Reiss, H.; Rabeony, H.; Elshall, M.S.; Bahta, A. 1987: Analysis of cloud chamber measurements of gas phase polymerization. The Journal of Chemical Physics 87(2): 1315-1328

Thomas, S.; Priestley, K.J.; Matthews, G.M. 2007: Analysis of Clouds and the Earth's Radiant Energy system (CERES) Lunar Measurements. Proc. Spie Int. Soc. Opt. Eng: 667715.1-667715.8

Qin, Y. 2006: Analysis of cluster-based hierarchical routing in ad hoc wireless networks. Electronics Letters 42(8): 474-476

Paturi, N.; Chinnayya Raja, V.E.M.U.R.I.; Korakakis, D.; Homak, L.A. 2005: Analysis of cluster defects in photonic crystals for biosensor applications. Proc. Spie Int. Soc. Opt. Eng: 60050N.1-60050N.11

Seah, M.P. 2007: Analysis of cluster ion sputtering yields: correlation with the thermal spike model and implications for static secondary ion mass spectrometry. Surface and Interface Analysis 39(7): 634-643

From, A.; Sandstrom, R. 1996: Analysis of clustered dispersions of uncombined carbon in cemented carbide. International Journal of Refractory Metals and Hard Materials 14(5-6): 393-405

Yinsheng, Q.U.; Ming, T.A.N. 1998: Analysis of clustered ordinal data with subclusters via a Bayesian hierarchical model. Commun. Stat., Theory Methods 27(6): 1461-1475

Tsujimoto, K.; Miyake, Y.; Yoshikawa, T.; Morikawa, T. 1999: Analysis of clusterization of quasi-streamwise vortices in near-wall turbulence. Jsme International Journal. Series B, Fluids and Thermal Engineering 42(2): 162-170

Fang, L.U.O.; Shuo, W.A.N.G.; Fei, W.A.N.G.; Boroyevich, D.; Gazel, N.; Yong, K.A.N.G.; Carson Baisden, A. 2010: Analysis of CM Volt-Second Influence on CM Inductor Saturation and Design for Input EMI Filters in Three-Phase DC-Fed Motor Drive Systems. IEEE Transactions on Power Electronics 25(7-8): 1905-1914

Sankara Narayanan, E.M.; Amaratunga, G.A.J.; Milne, W.I.; Humphrey, J.I.; Huang, Q. 1991: Analysis of CMOS-compatible lateral insulated base transistors. Ieee Trans. Electron Devices 38(7): 1624-1632

Li, N.; Chaivipas, W.; Okada, K.; Matsuzawa, A. 2008: Analysis of CMOS Transconductance Amplifiers for Sampling Mixers : Analog Circuits and Related SoC Integration Technologies. Ieice Transactions on Electronics 91(6): 871-878

Dimitrijev, S.; Stojadinovic, N. 1987: Analysis of CMOS transistor instabilities. Solid-State Electronics 30(10): 991-1003

Coole, T.J.; Antunes Simoes, J.F.C.P.; Cheshire, D.G.; Ruy Mesquita, M.D. 2001: Analysis of CNC machining technology in production of plaster moulds. British Ceramic Transactions 100(3): 134-139

Cho, T.S.; Yun, C.; Song, J.I.; Kim, K. 2005: Analysis of CNR penalty of radio-over-fiber systems including the effects of phase noise from laser and RF oscillator. Journal of Lightwave Technology 23(12): 4093-4100

Lee, Y.; Snell, R.L.; Dickman, R.L. 1990: Analysis of 12CO and 13CO emission in a 3 square degree region of the galactic plane between l = 23° and 25°. The Astrophysical Journal 355(2): 536-545

Bohne, W.; Reinsperger, G.U.; Rohrich, J.; Schopke, A.; Selle, B.; Sieber, I.; Stauss, P.; Urban, I. 1999: Analysis of Co and Cr dopants in epitaxial films of β-FeSi2 by ERDA, RBS, EDX and AES. Fresenius' J. Anal. Chem 365(1-3): 258-262

Gonzalez Palencia, J.C.; Furubayashi, T.; Nakata, T. 2013: Analysis of CO2 emissions reduction potential in secondary production and semi-fabrication of non-ferrous metals. Energy Policy 52: 328-341

Hsu, J.P.; Lin, S.H. 2003: Analysis of co-extrusion process for preparation of gradient index plastic optical fiber. Polymer (Guildford) 44(18): 5461-5467

Shustorovich, E.; Bell, A.T. 1988: Analysis of CO hydrogenation pathways using the bond-order-conservation method. Journal of Catalysis 113(2): 341-352

In Ju, Y.O.U.N.; Lee, Y.; Jeong, J.; Won Hong, L.E.E. 1997: Analysis of Co-Ni separation by a supported liquid membrane containing HEH(EHP). Journal of Membrane Science 125(2): 231-236

Valdueza, J.M.; Draganski, B.; Hoffmann, O.; Dirnagl, U.; Einhaupl, K.M. 1999: Analysis of CO2 vasomotor reactivity and vessel diameter changes by simultaneous venous and arterial Doppler recordings. Stroke (1970) 30(1): 81-86

Tyurin, V.Y.U.; Damaskin, B.B.; Safonov, V.A. 1993: Analysis of coadsorption data for tetramethylammonium and tetrabutylammonium ions at the mercury/water and mercury/dimethyl sulfoxide interface. Russian Electrochemistry 29(5): 711-715

Salama, A.I.A.; Mikhail, M.W. 1987: Analysis of coal and mineral processing circuits, signal flowgraph approach. Cim Bulletin 80(901): 51-53

Lee, J.B. 1985: Analysis of coal blends by automated microscopy. Journal of Microscopy 137(2): 137-144

Rochdi, A.; Landais, P.; Burneau, A. 1991: Analysis of coal by transmission FTIR microspectroscopy : Methodological aspect. Bull. Soc. Geol. Fr 162(2): 155-162

Katoh, T.; Ouchi, K. 1985: Analysis of coal-derived liquid obtained by mild hydrogenation. I: Neutral oil distilling at 186-343°C. Fuel (Guildford) 64(9): 1260-1268

Katom, T.; Ouchi, K. 1987: Analysis of coal-derived liquid obtained by mild-hydrogenation. II: Neutral oil distilling at 343-464°C. Fuel (Guildford) 66(1): 58-69

Shatil, A.A.; Skripova, E.Y.A. 1993: Analysis of coal-fired boiler furnaces. Thermal Engineering 40(9): 675-679

Bettinelli, M.; Baroni, U.; Pastorelli, N. 1987: Analysis of coal fly ash and environmental materials by inductively coupled plasma atomic emission spectrometry: comparison of different decomposition procedures. Journal of Analytical Atomic Spectrometry 2(5): 485-489

Idogawa, K.; Sasaki, M.; Ikegami, M.; Chiba, T.; Nagaishi, H.; Narita, H.; Sasaki, A.; Kotanigawa, T.; Fukuda, T.; Yamamoto, M.; Yoshida, T.; Maekawa, Y. 1995: Analysis of coal liquefaction reaction in a bench-scale direct coal liquefaction reactor. Nihon Enerugi Gakkaishi 74(3): 161-169

Philip, C.V.; Moore, P.K.; Anthony, R.G. 1987: Analysis of coal liquids by size exclusion chromatography gas chromatography ― Mass spectrometry. A.C.S. Symposium Series (352): 183-200

Deb, D. 2003: Analysis of coal mine roof fall rate using fuzzy reasoning techniques. International Journal of Rock Mechanics and Mining Sciences (1997) 40(2): 251-257

Moncur, J.G.; Bradshaw, W.G. 1983: Analysis of coal tar and petroleum pitches by computerized pattern recognition. Hrc and Cc. Journal of high Resolution Chromatography and Chromatography Communications 6(11): 595-604

Pengfei, W.A.N.G.; Lijun, J.I.N.; Jiahe, L.I.U.; Shengwei, Z.H.U.; Haoquan, H.U. 2013: Analysis of coal tar derived from pyrolysis at different atmospheres. Fuel (Guildf.) 104: 14-21

Kithinji, J.P.; Raynor, M.W.; Egia, B.; Davies, I.L.; Bartle, K.D.; Clifford, A.A. 1990: Analysis of coal tar polycyclic aromatic hydrocarbon LC-fractions by capillary SFC on a liquid crystalline stationary phase. Hrc J. High Resolut. Chromatogr 13(1): 27-33

Gu, F.; Chalaturnyk, R.J. 2005: Analysis of coalbed methane production by reservoir and geomechanical coupling simulation. Journal of Canadian Petroleum Technology 44(10): 33-42

Layne, A.W.; Byrer, C.W. 1988: Analysis of coalbed methane stimulations in the Warrior Basin, Alabama. Spe Unconventional Gas Technology Symposium (Louisville 1986) 3(3): 663-669

Bosanac, S.D. 1984: Analysis of coalescent resonances in atom-surface scattering. Physical Review. A, General Physics 30(1): 142-147

Ferreira, J.G.; Sequeira, A.; Hawkins, A.J.S.; Newton, A.; Nickell, T.D.; Pastres, R.; Forte, J.; Bodoy, A.; Bricker, S.B. 2009: Analysis of coastal and offshore aquaculture : Application of the FARM model to multiple systems and shellfish species. Aquaculture (Amsterdam) 289(1-2): 32-41

Turker, U.; Yagci, O.; Kabdasli, M.S. 2006: Analysis of coastal damage of a beach profile under the protection of emergent vegetation. Ocean Engineering 33(5-6): 810-828

Xiaofeng, L.I.; Quanan, Z.H.E.N.G.; Pichel, W.G.; Yan, X.H.; Liu, W.T.; Clementecolon, P. 2001: Analysis of coastal lee waves along the coast of Texas observed in advanced very high resolution radiometer images. Journal of Geophysical Research 106(C 4): 7017-7025

Michler, J.; Blank, E. 2001: Analysis of coating fracture and substrate plasticity induced by spherical indentors : diamond and diamond-like carbon layers on steel substrates. Thin Solid Films 381(1): 119-134

Elmahallawy, N.A.; Taha, M.A.; Shady, M.A.; Elsissi, A.R.; Attia, A.N.; Reif, W. 1997: Analysis of coating layer formed on steel strips during aluminising by hot dipping in Al-Si baths. Materials Science and Technology 13(10): 832-840

Qibo, J.I.A.N.G.; Fuzheng, Y.A.N.G.; Pitchumani, R. 2005: Analysis of coating thickness variation during optical fiber processing. Journal of Lightwave Technology 23(3): 1261-1272

Drumm, C.A.; Ulicny, J.C. 1989: Analysis of coatings on glass fiber reinforcements. Polymer Composites 10(1): 44-51

Keam, R.B.; Williamson, A.G. 1992: Analysis of coaxial-line/rectangular waveguide junction with dielectrically sheathed probe. Electronics Letters 28(3): 240-241

Hum, P.J.; Leong, M.S.; Kooi, P.S.; Yeo, T.S. 1993: Analysis of coaxial-line to radial-line junction with dielectrically sheathed post by finite-difference time-domain method. Electronics Letters 29(5): 458-459

Lingna, Y.U.E.; Wenxiang, W.A.N.G.; Yubin, G.O.N.G.; Keqian, Z.H.A.N.G. 2004: Analysis of coaxial ridged disk-loaded slow-wave structures for relativistic traveling wave tubes. IEEE Transactions on Plasma Science 32(3): 1086-1092

Wu, X.; Mariotte, F. 1997: Analysis of coaxial waveguide partially filled with chiral media. International Journal of Infrared and Millimeter Waves 18(12): 2411-2435

Burnett, M.G.; Abouelwafa, M.H.M. 1984: Analysis of cobalt complexes by high-performance liquid chromatography using ion-pair reversed-phase, silica, or alumina columns. Journal of the Chemical Society. Dalton Transactions (10): 2341-2343

Andersen, I.; Hogetveit, A.C. 1984: Analysis of cobalt in plasma by electrothermal atomic absorption spectrometry. Fresenius' Zeitschrift für Analytische Chemie 318(1): 41-44

Burton, B.; Greenwood, G.W. 1985: Analysis of Coble creep in cylindrical and cubic crystals - Analyse du fluage de Coble dans les cristaux cylindriques et culiques. Materials Science and Technology 1(12): 1029-1032

Wey, A.B.; Caslavska, J.; Thormann, W. 2000: Analysis of codeine, dihydrocodeine and their glucuronides in human urine by electrokinetic capillary immunoassays and capillary electrophoresis-ion trap mass spectrometry. J. Chromatogr 895(1-2): 133-146

Von Samsonhimmelstjerna, G.; Harder, A.; Failing, K.; Pape, M.; Schnieder, T. 2003: Analysis of codon usage in β-tubulin sequences of helminths. Parasitology Research (1987) 90(4): 294-300

Lesnic, D.; Elliott, L.; Ingham, D.B. 1999: Analysis of coefficient indentification problems associated to the inverse Euler-Bernoulli beam theory. Ima Journal of Applied Mathematics 62(2): 101-116

Han, H.N.; Kim, H.S.; Oh, K.H.; Lee, D.N. 1994: Analysis of coefficient of friction in compression of porous metal rings. Powder Metallurgy 37(4): 259-264

Bhaskar Rao, D.V. 1986: Analysis of coefficient quantization errors in state-space digital filters. IEEE Transactions on Acoustics, Speech, and Signal Processing 34(1): 131-139

Mata, P.; Garcia Sedano, P.; Serra, J. 1992: Analysis of cofrentes abnormal plant transients with Retran-02 and Retran-03. Nuclear Technology 100(2): 203-215

Kim, Y.K.; Lee, J.J.; Hong, J.P.; Hur, Y. 2004: Analysis of cogging torque considering tolerance of axial displacement on BLDC motor by using a stochastic simulation coupled with 3-D EMCN. IEEE Transactions on Magnetics 40(2): 1244-1247

Kawase, Y.; Yamaguchi, T.; Hayashi, Y. 1995: Analysis of cogging torque of permanent magnet motor by 3-D finite element method. Cefc'94 : Biennial IEEE Conference on Electromagnetic Field Computation 31(3): 2044-2047

Mohammed Suliman, I.; Lehtomaki, J.J.; Umebayashi, K.; Katz, M. 2013: Analysis of Cognitive Radio Networks with Imperfect Sensing. Ieice Transactions on Communications 96(6): 1605-1615

Wong, E.W.M.; Chuan Heng, F.O.H. 2009: Analysis of Cognitive Radio Spectrum Access with Finite User Population. IEEE Communications Letters 13(5): 294-296

Xiaorong, Z.H.U.; Lianfeng, S.H.E.N.; Yum Ts, P. 2007: Analysis of cognitive radio spectrum access with optimal channel reservation. IEEE Communications Letters 11(4): 304-306

Xingchun, C.H.U.; Shengbao, Z.H.A.N.; Shanghong, Z.H.A.O.; Jie, X.U.; Zhuoliang, W.U. 2008: Analysis of coherent beam combining through superposed volume gratings by coupled wave theory. Optics and Laser Technology 40(3): 505-509

Tateiba, M.; Tomita, E. 1990: Analysis of coherent E-waves scattered from a conducting cylinder surrounded by turbulence. Trans. Inst. Electron. Commun. Eng. Jpn., Sect. E 73(4): 457-458

Uduh, P.C. 1989: Analysis of coherent image of grating with rectangular transmission profile. Journal of the Optical Society of America. A, Optics and Image Science 6(10): 1555-1560

Vartiainen, E.M.; Peiponen, K.E.; Tsuboi, T. 1990: analysis of coherent Raman spectra. Journal of the Optical Society of America. B, Optical Physics 7(5): 722-725

Chekroun, M.; Le Marrec, L.; Abraham, O.; Villain, G.; Durand, O. 2009: Analysis of coherent surface wave dispersion and damping for non destructive testing of concrete. Actes Des Journees Scientifiques Du Lcpc: 869-874

Roman, J.F.; Moreno, V.; Petzing, J.N.; Tyrer, J.R. 2005: Analysis of coherent symmetrical illumination for electronic speckle pattern shearing interferometry. Journal of Modern Optics 52(6): 797-812

Jayaprakash, R.; Kushwaha, S.S.; Shanker, J. 1994: Analysis of cohesive energies and equation of state for high-temperature superconductors. Physica. C. Superconductivity 227(1-2): 109-112

Zachar, A. 2010: Analysis of coiled-tube heat exchangers to improve heat transfer rate with spirally corrugated wall. International Journal of Heat and Mass Transfer 53(19-20): 3928-3939

Quintos, C.E. 1998: Analysis of cointegration vectors using the GMM approach. Journal of Econometrics 85(1): 155-188

Mohammad Hosseini, F.O.U.L.A.D.I.; Ayub, M.; Mohd Jailani Mohd, N.O.R. 2011: Analysis of coir fiber acoustical characteristics. Applied Acoustics 72(1): 35-42

Mazzieri, V.A.; Pieck, C.L.; Vera, C.R.; Yori, J.C.; Grau, J.M. 2008: Analysis of coke deposition and study of the variables of regeneration and rejuvenation of naphtha reforming trimetallic catalysts. Ibero-American Symposium of Catalysis 133-135: 870-878

Muhammad, O.H.J.; Kam, E.K.T. 1997: Analysis of coke laydown in FCC catalyst through structured catalyst modelling and experimentation. International Symposium on the Dynamics of Catalytic Systems 2 38(1): 85-95

Kokkonen, P.; Ojaniemi, E.; Poykio, R. 1987: Analysis of coke oven gas by gas chromatography. Journal of Chromatography 391(2): 435-441

Albright, L.F.; Marek, J.C. 1988: Analysis of coke produced in ethylene furnaces: insights on process improvements. Industrial and Engineering Chemistry Research 27(5): 751-755

Tsafnat, N.; Amanat, N.; Jones, A.S. 2011: Analysis of coke under compressive loading: A combined approach using micro-computed tomography, finite element analysis, and empirical models of porous structures. Fuel (Guildford) 90(1): 385-388

Ellis, A.W.; Leathers, D.J. 1999: Analysis of cold airmass temperature modification across the U.S. Great Plains as a consequence of snow depth and albedo. Journal of Applied Meteorology (1988) 38(6): 696-711

Sun, X.K.; Chen, S.J.; Xu, J.Z.; Zhen, L.D.; Kim, K.T. 1999: Analysis of cold compaction densification behaviour of metal powders. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 267(1): 43-49

Schneider, R.; Reiter, D.; Coster, D.; Neuhauser, J.; Lackner, K.; Braams, B. 1995: Analysis of cold divertor concepts for ITER. J. Nucl. Mater 220-22: 1076-1080

Heller, M.; Jones, R.; Williams, J.F. 1991: Analysis of cold-expansion for cracked and uncracked fastener holes. Engineering Fracture Mechanics 39(2): 195-212

Kumar, S.; Shanker, K.; Lal, G.K. 2002: Analysis of cold extrusion of non re-entry product shapes. Journal of Manufacturing Science and Engineering 124(1): 71-78

Gutierrez, R.; Loureiro, A.; Lopez, M.; Moreno, A. 2011: Analysis of cold-formed purlins with slotted sleeve connections. Thin-Walled Structures 49(7): 833-841

Kozima, H.; Watanabe, S.; Hiroe, K.; Nomura, M.; Ohta, M. 1997: Analysis of cold fusion experiments generating excess heat, tritium and helium. Journal of Electroanalytical Chemistry (1992) 425(1-2): 173-178

Anju, C.H.O.P.R.A.; Sastry, M.I.S.; Kapur, G.S.; Sarpal, A.S.; Jain, S.K.; Srivastava, S.P.; Bhatnagar, A.K. 1996: Analysis of cold rolling oils by NMR and IR techniques. Lubrication Engineering 52(4): 279-284

Kobayashi, A.; Kurashima, A.; Endo, S. 1984: Analysis of cold start combustion in a direct injection diesel engine. Sae Transactions 93(1): 1.641-1.648

Yueqi, L.U.O.; Qian, G.U.O.; Qing, D.U.; Yan, Y.I.N.; Kui, J.I.A.O. 2013: Analysis of cold start processes in proton exchange membrane fuel cell stacks. Journal of Power Sources 224: 99-114

Jai Sam, K.I.M.; Kim, C.W. 1984: Analysis of Coleman-Weinberg potentials in orbit space: general method and application to the inflationary universe. Nuclear Physics. B 244(2): 523-540

Bahabad, A.; Voloch, N.; Arie, A. 2008: Analysis of Colinear Quasi-Phase-Matching in Nonlinear Photonic Crystals. IEEE Journal of Quantum Electronics 44(7-8): 638-644

Girard, P.; Robin, V. 2006: Analysis of collaboration for project design management. Computers in Industry 57(8-9): 817-826

Rodeo, S.A.; Suzuki, K.; Yamauchi, M.; Bhargava, M.; Warren, R.F. 1998: Analysis of collagen and elastic fibers in shoulder capsule in patients with shoulder instability. Am. J. Sports Med 26(5): 634-643

Hatamochi, A.; Ono, M.; Arakawa, M.; Takeda, K.; Ueki, H. 1992: Analysis of collagen gene expression by cultured fibroblasts in morphoea. British Journal of Dermatology (1951) 126(3): 216-221

Gupta, N.K.; Mohamed Sheriff, N.; Velmurugan, R. 2008: Analysis of collapse behaviour of combined geometry metallic shells under axial impact. International Journal of Impact Engineering 35(8): 731-741

Mimaki, T.; Maruyama, K.; Mizunuma, S.; Inowaki, R. 1996: Analysis of collapse strength for casing worn by tool joint and wireline. Sekiyu Gijutsu Kyokaishi = Journal of the Japanese Association of Petroleum Technology 61(3): 231-238

Leichnitz, W. 1990: Analysis of collapses on tunnel construction sites on the new line of the German Federal Railway - Analyse des effondrements lors de la construction des tunnels de la nouvelle ligne ferroviaire allemande. Tunnelling and Underground Space Technology 5(3): 199-203

Leichnitz, W. 1990: Analysis of collapses on tunnel construction sites on the new lines of the German Federal Railway - Etude des effondrements survenus sur les sites de construction de tunnel sur les lignes nouvelles de la République fédérale d'Allemagne. Sancot Seminar (1988) 5(3): 199-203

Ashurst, J.T.; Rocha, O.; Tobis, J. 1992: Analysis of Collateral Data : A Method for Assessing and Correcting the Effects of Attrition on Internal Validity. The Journal of Experimental Education 60(3): 215-234

Curic, M.; Janc, D. 2010: Analysis of collection equation solutions under truncated size spectrum assumption for hydrometeors. Atmos. Res 96(2-3): 378-387

Bessiere, J.; Khayar, M. 1993: Analysis of collector adsorption onto malachite by means of dielectric measurements. International Journal of Mineral Processing 39(1-2): 107-118

Wadhwa, S.; Browne, J. 1988: Analysis of collision avoidance in multirobot cells using Petri nets. Robotersysteme 4(2): 107-115

Kuan, C.; Dimyati, K. 2006: Analysis of collision probabilities for saturated IEEE 802.11 MAC protocol. Electronics Letters 42(19): 1125-1127

Hertel, I.V.; Kelley, M.H.; Mcclelland, J.J. 1987: Analysis of collisional alignment and orientation studied by scattering of spin-polarized electrons from laser excited atoms. Zeitschrift für Physik. D, Atoms, Molecules and Clusters 6(2): 163-183

Young Wook, C.H.O.I.; Lee, H.J. 2003: Analysis of collisional sheath structure in an argon DC discharge. IEEE Transactions on Plasma Science 31(5): 1032-1037

Grout, H.; Wiesner, M.R.; Bottero, J.Y. 1999: Analysis of colloidal phases in urban stormwater runoff. Environmental Science and Technology 33(6): 831-839

Fischer, C.H. 1994: Analysis of colloids. VI: Semiconductor colloids of high monidispersity by preparative size exclusion chromatography. Journal of Liquid Chromatography 17(17): 3593-3611

Spiezia, S.; Farina, R.; Cerbone, G.; Assanti, A.P.; Lovino, V.; Siciliani, M.; Lombardi, G.; Colao, A. 2001: Analysis of color Doppler signal intensity variation after levovist injection : A new approach to the diagnosis of thyroid nodules. Journal of Ultrasound in Medicine 20(3): 223-231

Zhigang, F.A.N. 2006: Analysis of color error diffusion with vector error filters. Proc. Spie Int. Soc. Opt. Eng: 60580Y.1-60580Y.7

Mino, N.; Tamura, H.; Ogawa, K. 1991: Analysis of color transitions and changes on Langmuir-Blodgett films of a polydiacetylene derivative. Langmuir 7(10): 2336-2341

Nakamura, Y.; Hirayama, S.; Maegama, Y. 1986: Analysis of colored films on ferritic and austenitic stainless steels - Analyse der gefaerbten Schichten auf ferritischen und austenitischen nichtrostenden Staehlen. Tetsu-To-Hagane 72(14): 1958-1964

Borisenko, O.A.; Petrov, V.K.; Zinovjev, G.M. 1990: Analysis of colour screening in a QCD plasma within an analytically solvable model. Physics Letters. Section B 236(3): 349-353

Irwin, G.W.; Fleming, R.J. 1988: Analysis of coloured filter controllers for bank-to-turn CLOS guidance. Iee Proceedings. Part D. Control Theory and Applications 135(6): 486-492

Yoshida, O.; Ishikawa, J.; Endo, K.; Kitaori, N. 1997: Analysis of columnar microstructure in Fe-N thin films prepared by an ion-assisted vapor deposition method. Jpn. J. Appl. Phys 36(2): 777-780

Klypin, A.A.; Karachentsev, I.D.; Lebedev, V.S. 1990: Analysis of Coma strip galaxy redshift catalog. Monthly Notices of the Royal Astronomical Society 246(2): 193-199

Danicki, E.J. 2011: Analysis of comb transducers with sliding teeth. European Journal of Mechanics. A. Solids 30(4): 510-516

Pawlikowski, M. 1986: Analysis of combination bands in the MVCD spectra of cubic molecules in terms of a vibrionic coupling model with non-condon effects. Chemical Physics Letters 128(2): 172-176

Lawrence, J. 2002: Analysis of combination trials with no placebo arm. Drug Information Journal 36(1): 151-156

Stanek, Z. 1999: Analysis of combinatonal chemistry media with a single reflection HATR accessory. American Laboratory (Fairfield) 31(24): 22-26

Guttman, A.; Khandurina, J.; Budworth, P.; Wenying, X.U.; Hou, Y.M.; Xun, W.A.N.G. 2004: Analysis of combinatorial natural products by HPLC and CE. Lc Gc North America 22(1): 58-67

Faidz, A.R.; Ghafourishiraz, H.; Takahashi, K.; Chuah, H.T. 2001: Analysis of combined ball lens and conically lensed fiber scheme to improve the coupling efficiency and misalignment tolerance between laser diodes and single mode fibers. Journal of Optical Communications 22(3): 82-86

Lin, T.F.; Chang, C.J.; Yan, W.M. 1988: Analysis of combined buoyancy effects of thermal and mass diffusion on laminar forced convection heat transfer in a vertical tube. J. Heat Transf 110(2): 337-344

Taik Young, K.I.M.; Seung Wook, B.A.E.K. 1991: Analysis of combined conductive and radiative heat transfer in a two-dimensional rectangular enclosure using the discrete ordinates method. International Journal of Heat and Mass Transfer 34(9): 2265-2273

Yuen, W.W.; Takara, E.E. 1988: Analysis of combined conductive-radiative heat transfer in a two-dimensional rectangular enclosure with a gray medium. Journal of Heat Transfer 110(2): 468-474

Gang, H.A.N.; Shijun, Y.O.U.; Tianzhen, Y.E.; Peng, S.U.N.; Huan, Z.H.A.N.G. 2014: Analysis of combined cooling, heating, and power systems under a compromised electric-thermal load strategy. Energy and Buildings 84: 586-594

Bo, Q.U.; Jiaolong, W.E.I.; Zuping, T.A.N.G.; Tao, Y.A.N.; Zhihui, Z.H.O.U. 2014: Analysis of Combined Effects of Multipath and CW Interference on Coherent Delay Lock Loop. Wireless Personal Communications 77(3): 2213-2233

Barletta, A. 1999: Analysis of combined forced and free flow in a vertical channel with viscous dissipation and isothermal-isoflux boundary conditions. Journal of Heat Transfer 121(2): 349-356

Suzuki, T.; Goda, K.; Suzuki, N.; Ohno, H. 1995: Analysis of combined full energy peaks of gamma-ray spectra. Journal of Nuclear Science and Technology 32(1): 75-77

Hajji, A.; Worek, W.M. 1988: Analysis of combined fully-developed natural convection heat and mass transfer between two inclined parallel plates. International Journal of Heat and Mass Transfer 31(9): 1933-1940

Wise, B.M.; Gallagher, N.B.; Grate, J.W. 2003: Analysis of combined mass- and volume-transducing sensor arrays. J. Chemom 17(8-9): 463-469

Wang, X.C.; Ghosh, S.K.; Link, D. 1992: Analysis of combined mismatched tooth surfaces up to and including third order contact. European Journal of Mechanical Engineering 37(4): 259-267

Dong, Z.F.; Ebadian, M.A. 1995: Analysis of combined natural and forced convection in vertical semicircular ducts with radial internal fins. Numerical Heat Transfer. Part A, Applications 27(3): 359-372

Chua, K.C.; Nguyen, D.T. 1989: Analysis of combined priority and bit-rate compression traffic access control strategy for integrated services networks. Electronics Letters 25(8): 489-490

Kumar, S.; Tien, C.L. 1990: Analysis of combined radiation and convection in a particulate-laden liquid film. Journal of Solar Energy Engineering 112(4): 293-300

Jue, T.C. 2006: Analysis of combined thermal and magnetic convection ferrofluid flow in a cavity. International Communications in Heat and Mass Transfer 33(7): 846-852

Ki Hyung, L.E.E.; Chang Sik, L.E.E.; Jea Duk, R.Y.U.; Choi, G.M. 2002: Analysis of combustion and flame propagation characteristics of LPG and gasoline fuels by laser deflection method. Ksme International Journal 16(7): 935-941

Rakopoulos, C.D.; Hountalas, D.T.; Taklis, G.N.; Tzanos, E.I. 1995: Analysis of combustion and pollutants formation in a direct injection diesel engine using a multi-zone model. International Journal of Energy Research 19(1): 63-88

Rakopoulos, C.D.; Taklis, G.N.; Tzanos, E.I. 1995: Analysis of combustion chamber insulation effects on the performance and exhaust emissions of a DI diesel engine using a multi-zone model. Heat Recovery Systems and Chp 15(7): 691-706

Hill, P.G.; Douville, B. 2000: Analysis of combustion in diesel engines fueled by directly injected natural gas. Journal of Engineering for Gas Turbines and Power 122(1): 141-149

Ladommatos, N.; Parsi, M.; Mcgrath, N.; Mayne, S. 1993: Analysis of combustion in the cetane-rating engine using high-speed photography. Proceedings of the Institution of Mechanical Engineers. Part D, Journal of Automobile Engineering 207(4): 317-328

Kiesewetter, F.; Konle, M.; Sattelmayer, T. 2007: Analysis of combustion induced vortex breakdown driven flame flashback in a premix burner with cylindrical mixing zone. Journal of Engineering for Gas Turbines and Power 129(4): 929-936

Yang, H.C.; Eun, H.C.; Lee, D.G.; Jung, C.H.; Lee, K.W. 2006: Analysis of combustion kinetics of powdered nuclear graphite by using a non-isothermal thermogravimetric method. Journal of Nuclear Science and Technology 43(11): 1436-1439

Satyamurthy, P.; Venkatramani, N.; Rohatgi, V.K. 1984: Analysis of combustion MHD generator using a coupled core-boundary layer model. Energy Conversion and Management 24(1): 67-74

Catania, A.E.; Misul, D.; Spessa, E.; Vassallo, A. 2004: Analysis of combustion parameters and their relation to operating variables and exhaust emissions in an upgraded multivalve Bi-fuel CNG SI engine. Sae Transactions 113(3): 682-703

Murakami, K.; Sugawara, K.; Kawaguchi, T. 2013: Analysis of Combustion Rate of Various Carbon Materials for Iron Ore Sintering Process. Isij International 53(9): 1580-1587

Hibino, A. 1997: Analysis of combustion synthesis process of TiAl intermetallic compound by dipping experiment of Ti wire into Al melt. Nippon Kinzoku Gakkaishi (1952) 61(2): 128-134

Chacartegui, R.; Jimenezespadafor, F.; Sanchez, D.; Sanchez, T. 2008: Analysis of combustion turbine inlet air cooling systems applied to an operating cogeneration power plant. Energy Conversion and Management 49(8): 2130-2141

Hibino, A. 1995: Analysis of combustion wave in self propagating high temperature synthesis of Ni-Al intermetallic compounds. Nippon Kinzoku Gakkaishi (1952) 59(7): 717-725

Jicheng, H.E.; Kuwabara, M.; Muchi, I. 1986: Analysis of combustion zone in raceway under operation of pulverized coal injection - Analyse der Verbrennungszone vor den Blasformen bei Einblasen pulverfoermiger Kohle. Tetsu-To-Hagane 72(14): 1847-1854

Baum, D.; Lenzini, L. 1991: Analysis of command operation procedures (COP's) for reliable data transfer in the european space data network. IEEE Journal on Selected Areas in Communications 9(2): 233-240

Gaudin, K.; Chaminade, P.; Ferrier, D.; Baillet, A.; Tchapla, A. 1999: Analysis of commercial ceramides by non-aqueous reversed-phase liquid chromatography with evaporative light-scattering detection. Chromatographia (Wiesbaden) 49(5-6): 241-248

Jackson, W.P.; Later, D.W. 1986: Analysis of commercial dyes by capillary column supercritical fluid chromatography. Hrc and Cc. Journal of high Resolution Chromatography and Chromatography Communications 9(3): 175-177

Henderson, I.K.; Saarinordhaus, R. 1992: Analysis of commercial explosives by single-column ion chromatography. J. Chromatogr 602(1-2): 149-154

Cutress, I.J.; Dickinson, E.J.F.; Compton, R.G. 2010: Analysis of commercial general engineering finite element software in electrochemical simulations. Journal of Electroanalytical Chemistry (1992) 638(1): 76-83

Wittmann, Z.; Pudmer, E. 1985: Analysis of commercial zinc di(alkylphenyl) dithiophosphate additive©. Asle Transactions 28(4): 426-430

Akama, Y.; Saito, H.; Hayashi, A.; Sato, K.; Tanaka, S.; Kanno, H. 1993: Analysis of commercially available 1-phenyl-3-methyl-4-benzoyl-5-pyrazolone for its keto-form isomer by differential thermal analysis technique. Bunseki Kagaku 42(2): 115-118

Yan, Z.H.U.; Xia, Y.A.O.; Yongchao, T.I.A.N.; Xiaojun, L.I.U.; Weixing, C.A.O. 2008: Analysis of common canopy vegetation indices for indicating leaf nitrogen accumulations in wheat and rice. International Journal of Applied Earth Observation and Geoinformation 10(1): 1-10

Brengartner, D.A. 1985: Analysis of common fatty acid glycerides by gas chromatography. Analytica Chimica Acta 173: 177-183

Shiue, G.H.; Shiu, J.H.; Tsai, Y.C.; Hsu, C.M. 2012: Analysis of Common-Mode Noise for Weakly Coupled Differential Serpentine Delay Microstrip Line in High-Speed Digital Circuits. IEEE Transactions on Electromagnetic Compatibility 54(3): 655-666

Hasib, A.; Fapojuwo, A.O. 2008: Analysis of Common Radio Resource Management Scheme for End-to-End QoS Support in Multiservice Heterogeneous Wireless Networks. IEEE Transactions on Vehicular Technology 57(4): 2426-2439

Zarudi, M.; Shenkman, A. 1993: Analysis of common switching converters using Z transform. IEEE Transactions on Circuits and Systems 1, Fundamental Theory and Applications 40(9): 602-605

Berselli, L.C.; Grisanti, C.R.; John, V. 2007: Analysis of commutation errors for functions with low regularity. Journal of Computational and Applied Mathematics 206(2): 1027-1045

Angelova, R.K.; Gichev, T.R. 1990: Analysis of commutation in complex linear electrical circuits. Soviet Electrical Engineering 61(9): 94-98

Subrahmanyam, V.; Gopalakrishnan, N. 1987: Analysis of commutation of self controlled current source inverter-fed synchronous motor. Journal of the Institution of Engineers. India. Electrical Engineering Division 68(1): 1-7

Dawson, F.P.; Dewan, S.B. 1992: Analysis of commutator configurations for the protection of a line-commutated converter. Ieee Trans. Ind. Appl 28(6): 1256-1268

Holland, B.J.; Hay, J.N. 2002: Analysis of comonomer content and cyclic oligomers of poly(ethylene terephthalate). Polymer (Guildford) 43(6): 1797-1804

Morini, A.; Rozzi, T. 1995: Analysis of compact E-plane diplexers in rectangular waveguide. IEEE Transactions on Microwave Theory and Techniques 43(8): 1834-1839

Kondoh, K.; Watanabe, R.; Hashimoto, H. 2000: Analysis of compaction behaviour of wet granulated aluminium alloy powder. Powder Metallurgy 43(4): 359-363

Ane, C. 2008: Analysis of Comparative Data with Hierarchical Autocorrelation. The Annals of Applied Statistics 2(3): 1078-1102

Lombardi, F. 1988: Analysis of comparison-based diagnosable systems using temporal criteria. Computer Journal 31(3): 201-208

Stevens, D.A.; Lee, J.Y. 1997: Analysis of compassionate use itraconazole therapy for invasive aspergillosis by the NIAID mycoses study group criteria. Archives of Internal Medicine 157(16): 1857-1862

Leung, L.C.; Hui, Y.V.; Zheng, M. 2003: Analysis of compatibility between interdependent matrices in ANP. The Journal of the Operational Research Society 54(7): 758-768

Rashmi Ranjan, P.A.T.T.N.A.I.K.; Prasada Rao, R.A.N.G.A.R.A.J.U. 2007: Analysis of Compatibility between Repair Material and Substrate Concrete Using Simple Beam with Third Point Loading. Journal of Materials in Civil Engineering 19(12): 1060-1069

Iordache, D.; Pusca, S.; Toma, G.; Paun, V.; Sterian, A.; Morarescu, C. 2006: Analysis of Compatibility with Experimental Data of Fractal Descriptions of the Fracture Parameters. Lect. Notes Comput. Sci: 804-813

Valles, J.A.; Lazaro, J.A.; Rebolledo, M.A. 2002: Analysis of competing mechanisms in transitions between excited states in Er-doped integrated waveguides. IEEE Journal of Quantum Electronics 38(3): 318-323

Gasbarra, D.; Karia, S.R. 2000: Analysis of competing risks by using Bayesian smoothing. Scandinavian Journal of Statistics 27(4): 605-617

Jansen, P.L.; Longjang, L.I.; Lorenz, R.D. 1995: Analysis of competing topologies of linear induction machines for high-speed material transport systems. IEEE Transactions on Industry Applications 31(4): 925-932

Wang, P.Y.; Seidman, S.B.; Reggia, J.A. 1988: Analysis of competition-based spreading activation in connectionist models. International Journal of Man-Machine Studies 28(1): 77-97

Kita, H.; Kawano, A.; Nishikawa, Y. 1991: Analysis of competition between electricity and town-gas suppliers under time-of-use pricing. Memoirs of the Faculty of Engineering, Kyoto University 53(3): 125-140

Hill, J.; Mather, K.; Caligari, P.D.S. 1987: Analysis of competitive ability among genotypes of perennal ryegrass. II: Effect upon dry matter production. Euphytica 36(1): 109-115

Hengst, S.; Koppies, J.D.M. 1996: Analysis of competitiveness in commercial shipbuilding. J. Ship Prod 12(2): 73-84

Marshall, H.L.; Avni, Y.; Tananbaum, H.; Zamorani, G. 1983: Analysis of complete quasar samples to obtain parameters of luminosity and evolution functions. The Astrophysical Journal 269(1): 35-41

Le Roux, M.N.; Cozic, M.I.; Loubere, R. 2001: Analysis of completely discrete finite element method for a free boundary diffusion problem with absorption. Journal of Computational and Applied Mathematics 134(1-2): 143-164

Ivanova, N.A.; Durov, V.A. 1992: Analysis of complex acoustic spectra. Russian Journal of Physical Chemistry 66(7): 1015-1018

Wubbenhorst, M.; Van Turnhout, J. 2002: Analysis of complex dielectric spectra. I. One-dimensional derivative techniques and three-dimensional modelling. J. Non-Cryst. Solids 305(1-3): 40-49

Van Turnhout, J.; Wubbenhorst, M. 2002: Analysis of complex dielectric spectra. II. Evaluation of the activation energy landscape by differential sampling. J. Non-Cryst. Solids 305(1-3): 50-58

Tsuji, Y.; Koshiba, M. 1999: Analysis of complex eigenenergies of an electron in two- and three-dimensionally confined systems using the weighted potential method. Microelectronics Journal 30(10): 1001-1006

Rao, Y.K.; Donley, M.; Lee, H.G. 1984: Analysis of complex equilibria in the Ge-Se-I vapor transport system saturated with GeSe(g). Journal of Electronic Materials 13(3): 523-544

Kostic, M.B. 1998: Analysis of complex grounding systems consisting of foundation grounding systems with external grids. IEEE Transactions on Power Delivery 13(3): 752-756

Goldfarb, I.; Briggs, G.A.D. 2002: Analysis of complex heterogeneous surfaces by bias-dependent scanning tunneling microscopy and spectroscopy. Mater. Sci. Eng., B, Solid-State Mater. Adv. Technol 91-92: 115-119

Power, G.D.; Barber, T.J. 1988: Analysis of complex hypersonic flows with strong viscous/inviscid interaction. Aiaa Journal 26(7): 832-840

Leib, K.G.; Pernick, B.J. 1989: Analysis of complex input images for matched filter construction. Optical Engineering (Bellingham. Print) 28(1): 1-7

Coppi, S.; Betti, A.; Dondi, F. 1988: Analysis of complex mixtures by capillary gas chromatography with statistical estimation of the number of components. Analytica Chimica Acta 212(1-2): 165-170

Mingjien, C.H.I.E.N. 1985: Analysis of complex mixtures by gas chromatography/mass spectrometry using a pattern recognition method. Analytical Chemistry 57(1): 348-352

Huth, T.C.; Denton, M.B. 1987: Analysis of complex mixtures by photoionization mass spectrometry with a vacuum-ultraviolet hydrogen-laser source. Analytica Chimica Acta 192(2): 165-173

Rudewicz, P.; Munson, B. 1986: Analysis of complex mixtures of ethoxylated alcohols by probe distillation/chemical ionization mass spectrometry. Analytical Chemistry 58(4): 674-679

Deeg, F.W.; Fayer, M.D. 1989: Analysis of complex molecular dynamics in an organic liquid by polarization selective subpicosecond transient grating experiments. The Journal of Chemical Physics 91(4): 2269-2279

Jimenez, A.; Tiampo, K.F.; Posadas, A.M.; Luzon, F.; Donner, R. 2009: Analysis of complex networks associated to seismic clusters near the Itoiz reservoir dam. The European Physical Journal. Special Topics 174: 181-195

Awrejcewicz, J.; Krysko, A.V. 2003: Analysis of complex parametric vibrations of plates and shells using Bubnov-Galerkin approach. Archive of Applied Mechanics (1991) 73(7): 495-504

Andreozzi, R.; Caprio, V.; Damore, M.G.; Insola, A.; Tufano, V. 1991: Analysis of complex reaction networks in gas-liquid systems : the ozonation of 2-hydroxypyridine in aqueous solutions. Industrial and Engineering Chemistry Research 30(9): 2098-2104

Liu, Q.H.; Chew, W.C. 1991: Analysis of complex rectangular dielectric waveguides. Journal of Electromagnetic Waves and Applications 5(3): 253-266

Komissarova, G.L. 1990: Analysis of complex roots of the dispersion equation for an elastic cylinder with liquid. Prikladnaa Mehanika (Kiev) 26(8): 25-29

De Beer, A.G.F.; Yixing, C.H.E.N.; Scheu, R.; Conboy, J.C.; Roke, S. 2013: Analysis of Complex Spectra Using Fourier Filtering. Journal of Physical Chemistry. C 117(50): 26582-26587

Govindram, C.B.; Krishnan, V. 1998: Analysis of complex surfactant systems : a classical approach. Tenside, Surfactants, Detergents 35(2): 104-107

Wagner, T.; Karacuban, H.; Moller, R. 2009: Analysis of complex thermal desorption spectra : PTCDA on copper. Surface Science 603(3): 482-490

Schmid, H.; Eisenreich, N.; Krause, C.; Pfeil, A. 1989: Analysis of complex thermoanalytical curves: the thermodynamic and kinetic parameters of isoprolammonium nitrate. Journal of Thermal Analysis 35(2): 569-576

Tang, M.C.; Copeland, L. 2007: Analysis of complexes between lipids and wheat starch. Carbohydrate Polymers 67(1): 80-85

Crandall, M.L.; Esposito, T.J.; Reed, R.L.; Gamelli, R.L.; Luchette, F.A. 2010: Analysis of Compliance and Outcomes in a Trauma System With a 2-Hour Transfer Rule. Archives of Surgery (Chicago 1960) 145(12): 1171-1175

Velamartinez, L.; Jhureguicorrea, J.C.; Rubiocerda, E.; Herreraruiz, G.; Lozanoguzman, A. 2008: Analysis of compliance between the cutting tool and the workpiece on the stability of a turning process. International Journal of Machine Tools and Manufacture 48(9): 1054-1062

Luah, M.H.; Fan, S.C. 1992: Analysis of complicated plates by a nine-node plate element. Computers and Structures 45(2): 243-252

Chaushu, G.; Mardinger, O.; Peleg, M.; Ghelfan, O.; Nissan, J. 2010: Analysis of Complications Following Augmentation With Cancellous Block Alloqrafts. Journal of Periodontology (1970) 81(12): 1759-1764

Mutawakilu Adisa, T.I.A.M.I.Y.U. 1993: Analysis of components for designing information products. Aslib Proceedings 45(7-8): 209-214

Lee, T.K.; Pan, A.D.E. 2001: Analysis of composite beam-columns under lateral cyclic loading - Calcul des structures poutres-poteaux composites sous des charges latérales cycliques. Journal of Structural Engineering (New York) 127(2): 186-193

Ranzi, G.; Bradford, M.A. 2009: Analysis of composite beams with partial interaction using the direct stiffness approach accounting for time effects. International Journal for Numerical Methods in Engineering 78(5): 564-586

Ranzi, G.; Gara, F.; Leoni, G.; Bradford, M.A. 2006: Analysis of composite beams with partial shear interaction using available modelling techniques : A comparative study. Computers and Structures 84(13-14): 930-941

Chakrabarti, A.; Sheikh, A.H.; Griffith, M.; Oehlers, D.J. 2012: Analysis of composite beams with partial shear interactions using a higher order beam theory. Engineering Structures 36: 283-291

Redwood, R.G.; Poumbouras, G. 1984: Analysis of composite beams with web openings - Calcul de poutres composites avec ouvertures dans l'âme. Journal of Structural Engineering (New York) 110(9): 1949-1958

Chan, W.S.; Vedhagiri, S. 2001: Analysis of composite bonded/bolted joints used in repairing. J. Compos. Mater 35(12): 1045-1061

Kalnaus, S.; Tenhaeff, W.E.; Sakamoto, J.; Sabau, A.S.; Daniel, C.; Dudney, N.J. 2013: Analysis of composite electrolytes with sintered reinforcement structure for energy storage applications. Journal of Power Sources 241: 178-185

Raghu Prasad, B.K.; Pavan Kumar, D.V.T.G. 2008: Analysis of composite ENF specimen using higher order beam theories. Thin-Walled Structures 46(6): 676-688

Nahas, M.N. 1985: Analysis of composite failure mechanisms using acoustic emission and ultrasonic scanning techniques. Composites 16(2): 148-152

Corso, J.J.; Guangqi, Y.E.; Hager, G.D. 2005: Analysis of composite gestures with a coherent probabilistic graphical model. Virtual Reality (Waltham Cross) 8(4): 242-252

Tay, T.E.; Lim, E.H. 1996: Analysis of composite laminates with transverse cracks. Composite Structures 34(4): 419-426

Chen, D.; Cheng, S. 1993: Analysis of composite materials: a micromechanical approach. Journal of Reinforced Plastics and Composites 12(12): 1323-1338

Hashin, Z. 1983: Analysis of composite materials―A survey. Journal of Applied Mechanics 50(3): 481-505

Salim, S.; Yadav, D.; Iyengar, N.G.R. 1993: Analysis of composite plastes with random material characteristics. Mechanics Research Communications 20(5): 405-414

Ferreira, A.J.M.; Roque, C.M.C.; Jorge, R.M.N. 2005: Analysis of composite plates by trigonometric shear deformation theory and multiquadrics. Computers and Structures 83(27): 2225-2237

Kwon, Y.W. 1992: Analysis of composite plates containing cracks. Journal of Pressure Vessel Technology 114(3): 358-363

Raamachandran, J.; Rajamohan, C. 1996: Analysis of composite plates using charge simulation method. Engineering Analysis with Boundary Elements 18(2): 131-135

Ferreira, A.J.M.; Roque, C.M.C.; Martins, P.A.L.S. 2003: Analysis of composite plates using higher-order shear deformation theory and a finite point formulation based on the multiquadric radial basis function method. Composites. Part B, Engineering 34(7): 627-636

Shankara, C.A.; Iyengar, N.G.R. 1992: Analysis of composite plates with higher order shear deformation theory. Mechanics Research Communications 19(4): 301-314

Han, J.H.; In, L.E.E. 1998: Analysis of composite plates with piezoelectric actuators for vibration control using layerwise displacement theory. Symposium on Mechanics of Composites (Evanston, Il 1997) 29(5): 621-632

Senocak, E.; Tanriover, H. 2007: Analysis of composite plates with variable stiffness using Galerkin Method. Aeronautical Journal 111(1118): 247-255

Kapi, H.O.H.; Perry, B.; Rotter, G.; Ishida, H.; Koenig, J.L. 1989: Analysis of composite processing using magnetic resonance imaging. The Journal of Adhesion 27(4): 245-249

Krueger, R.; Minguet, P.J. 2007: Analysis of composite skin-stiffener debond specimens using a shell/3D modeling technique. Composite Structures 81(1): 41-59

Hosseinitoudeshky, H.; Mohammadi, B.; Hamidi, B.; Ovesy, H.R. 2006: Analysis of composite skin/stiffener debounding and failure under uniaxial loading. Iccs/13 : International Conference on Composite Structures 75(1-4): 428-436

Lanhui, G.U.O.; Qin, R.O.N.G.; Xinbo, M.A.; Sumei, Z.H.A.N.G. 2013: Analysis of composite steel plate shear walls connected with frame beams only. Proceedings of the Institution of Civil Engineers. Structures and Buildings 166(9): 507-518

Kiang, H.J.; Dharan, C.K.H. 1989: Analysis of composite stretched-membrane heliostats. Journal of Solar Energy Engineering 111(2): 103-111

Srinivasan, S.; Biggers, S.B.; Latour, R.A. 1997: Analysis of composite structures using the 3-D global/3-D Local method. J. Reinf. Plast. Compos 16(4): 353-371

Young, R.J.; Huang, Y.L.; Gu, X.; Day, R.J. 1995: Analysis of composite test methods using Raman spectroscopy. Plastics Rubber and Composites Processing and Applications 23(1): 11-19

Holloway, C.L.; Perini, P.L.; Delyser, R.R.; Allen, K.C. 1997: Analysis of composite walls and their effects on short-path propagation modeling. IEEE Transactions on Vehicular Technology 46(3): 730-738

Quadakkers, W.J.; Elschner, A.; Holzbrecher, H.; Schmidt, K.; Speier, W.; Nickel, H. 1992: Analysis of composition and growth mechanisms of oxide scales on high temperature alloys by SNMS, SIMS, and RBS. Mikrochimica Acta (1966. Print) 107(3-6): 197-206

Florjanczyk, Z.; Krawiec, W. 1989: Analysis of composition data for copolymers of N-phenylmaleimide with styrene in terms of various copolymerization models. die Makromolekulare Chemie 190(9): 2141-2147

Neubauer, B.; Rosenauer, A.; Gerthsen, D.; Ambacher, O.; Stutzmann, M.; Albrecht, M.; Strunk, H.P. 1999: Analysis of composition fluctuations in AlxGa1-xN. European Materials Research Society 1998 Spring Meeting, Symposium L: Nitrides and Related Wide Band Gap Materials 59(1-3): 182-185

Belova, I.V.; Murch, G.E. 2004: Analysis of composition profiles to obtain interdiffusion coefficients in binary intermetallic compounds. Philosophical Magazine (2003. Print) 84(34): 3655-3662

Hulliger, J.; Dessauges, L.; Samtleben, T.A. 2006: Analysis of compositional distributions for exploring the phase space by the single sample concept in ceramic combinatorial chemistry. Journal of the American Ceramic Society 89(3): 1072-1078

Hiramatsu, K.; Tanaka, S.; Sawaki, N.; Akasaki, I. 1985: Analysis of compositional variation at initial transient time in LPE growth of InGaAsP/GaAs system. Jpn. J. Appl. Phys 24(8): 1030-1035

Xiaolong, Z.H.A.N.G.; Burke, G.J. 2011: Analysis of compound bullwhip effect causes. European Journal of Operational Research 210(3): 514-526

Yichen, F.A.N.G.; Shangping, T.A.O.; Peida, Y.E. 1992: Analysis of compound cross-coupling fiber resonator by means of signal flow graphs. Optics Communications 93(1-2): 87-91

Mo, J.P.T. 1989: Analysis of compressed air flow through a spool valve. Proceedings of the Institution of Mechanical Engineers. Part C. Mechanical Engineering Science 203(2): 121-131

Spitz, A.L. 1998: Analysis of compressed document images for dominant skew, multiple skew, and logotype detection. Computer Vision and Image Understanding 70(3): 321-334

Endruweit, A.; Long, A.C. 2010: Analysis of Compressibility and Permeability of Selected 3D Woven Reinforcements. Journal of Composite Materials 44(24): 2833-2862

He, L. 2000: Analysis of compressibility effects on Darrieus-Landau instability of deflagration wave. Europhysics Letters 49(5): 576-582

Kodikara, J.K.; Johnston, I.W. 1994: Analysis of compressible axially loaded piles in rock. International Journal for Numerical and Analytical Methods in Geomechanics 18(6): 427-437

Cho, J. 2001: Analysis of compressible diblock copolymer melts that microphase separate upon cooling. Macromolecules 34(17): 6097-6106

Van Dyken, R.D.; Ekaterinaris, J.A.; Chandrasekhara, M.S.; Platzer, M.F. 1996: Analysis of compressible light dynamic stall flow at transitional Reynolds numbers. Aiaa Journal 34(7): 1420-1427

Cavalieri, A.V.G.; Soviero, P.A.O. 2012: Analysis of compressible potential flow over aerofoils using the dual reciprocity method. Aeronautical Journal 116(1178): 391-406

Iwasaki, T.; Koga, T.; Satoh, M. 2000: Analysis of compressing and shearing behavior of powders in high-speed elliptical-rotor-type powder mixer (HEM). Journal of Chemical Engineering of Japan 33(3): 499-506

Sangachin, A.A.S.; Shanker, J. 1989: Analysis of compression for cuprous, silver and thallous halides. Solid State Communications 69(4): 443-445

Iijima, A.; Shoji, H. 2006: Analysis of compression-induced auto-ignition combustion characteristics of HCCI and ATAC using the same engine. Journal of Mechanical Science and Technology 20(9): 1449-1458

Martin, U.E.; Kaup, A. 2008: Analysis of compression of 4D volumetric medical image datasets using multi-view (MVC) video coding methods. Proc. Spie Int. Soc. Opt. Eng 7075: 707507.1-707507.8

Polyakov, V.A.; Shlitsa, R.P.; Khitrov, V.V.; Zhigun, V.I. 2001: Analysis of compression stresses of a filler and bending of a sandwich panel under multipoint loading. Mechanics of Composite Materials 37(2): 91-106

Tahir, N.A.; Hoffmann, D.H.H.; Maruhn, J.A.; Deutsch, C. 1995: Analysis of compression, thermonuclear burn and hydrodynamic stability of a reactor-size radiation driven inertial fusion target. Plasma Physics and Controlled Fusion 37(4): 447-462

Blair, S.C.; Cook, N.G.W. 1998: Analysis of compressive fracture in rock using statistical techniques : Part I. A non-linear rule-based model. International Journal of Rock Mechanics and Mining Sciences (1997) 35(7): 837-848

Blair, S.C.; Cook, N.G.W. 1998: Analysis of compressive fracture in rock using statistical techniques : Part II. Effect of microscale heterogeneity on macroscopic deformation. International Journal of Rock Mechanics and Mining Sciences (1997) 35(7): 849-861

Snelling, W.E.; Geraniotis, E. 1994: Analysis of compressive receivers for the optimal interception of frequency-hopped waveforms. 1990 IEEE Military Communications Conference (Monterey Ca) 42(1): 127-138

Sonnet, A.M.; Abul Khayer, M.; Haque, A. 2007: Analysis of Compressively Strained GaInAsP-InP Quantum-Wire Electro-Absorption Modulators. IEEE Journal of Quantum Electronics 43(11-12): 1198-1203

Farber, V.Y.E. 1992: Analysis of computation error in first-order digital filters with an expanding and effective finite memory. Journal of Computer and System Sciences International 30(6): 67-76

Tianshi, C.H.E.N.; Ke, T.A.N.G.; Guoliang, C.H.E.N.; Xin, Y.A.O. 2010: Analysis of Computational Time of Simple Estimation of Distribution Algorithms. IEEE Transactions on Evolutionary Computation 14(1): 1-22

Storlie, C.B.; Reich, B.J.; Helton, J.C.; Swiler, L.P.; Sallaberry, C.J. 2013: Analysis of computationally demanding models with continuous and categorical inputs. Reliability Engineering and Systems Safety 113: 30-41

Chassapis, C.S.; Petrou, J.K.; Petropoulos, J.H.; Theodorou, D.N. 1996: Analysis of computed trajectories of penetrant micromolecules in a simulated polymeric material. Macromolecules 29(10): 3615-3624

Runze, L.I.; Sudjianto, A. 2005: Analysis of computer experiments using penalized likelihood in gaussian kriging models. Technometrics 47(2): 111-120

Tianxi, T.A.N.G.; Zollinger, D.G.; Sanjaya, S.E.N.A.D.H.E.E.R.A. 1993: Analysis of concave curling in concrete slabs. Journal of Transportation Engineering 119(4): 618-633

Moosaie, A.; Atefi, G. 2007: Analysis of concentrated suspension flow by utilizing a cosserat-type continuum theory. Journal of Dispersion Science and Technology 28(6): 908-913

Toliyat, H.A.; Lipo, T.A. 1994: Analysis of concentrated winding induction machines for adjustable speed drive applications-experimental results. Ieee/Pes. Winter Meeting 9(4): 695-700

De Silva, P.S.N.; Fletcher, J.E.; Williams, B.W. 2006: Analysis of concentrated winding multi-phase machines under phase failure using decoupled vector space theory. Iee Conf. Publ: 420-424

Look, D.C.; Sundvold, P.D. 1983: Analysis of concentrating collectors of energy from a distant point source. Solar Energy 31(6): 545-555

Trticpetrovic, T.M.; Vladisavljevic, G.T.; Tesic, M.; Kumric, K.; Comor, J.J. 2002: Analysis of concentration boundary layer in thallium (III) extraction with butyl acetate using membrane modules of different length. Desalination (Amst.) 148(1-3): 241-246

Petit, N.; Soret, J.C.; Gervais, F. 1999: Analysis of concentration dependence of optical conductivity of BaPb1-xBixO3 revisited. Solid State Communications 110(11): 621-626

Thullie, J.; Chiao, L.; Rinker, R.G. 1986: Analysis of concentration forcing in heterogeneous catalysis. Chemical Engineering Communications 48(4-6): 191-205

Qiuxiang, Y.I.N.; Jingkang, W.A.N.G.; Zhao, X.U.; Guizhi, L.I. 2000: Analysis of concentration multiplicity patterns of continuous isothermal mixed suspension-mixed product removal reactive precipitators. Industrial and Engineering Chemistry Research 39(5): 1437-1442

Bader, M.S.H.; Veenstra, J.N. 1996: Analysis of concentration polarization phenomenon in ultrafiltration under turbulent flow conditions. Journal of Membrane Science 114(2): 139-148

Tyl, J.; Wlodarczyk, E. 1987: Analysis of concentric detonation waves in gaseous explosive mixtures. Journal of Technical Physics 28(3): 297-308

Tyl, J.; Wlodarczyk, E. 1984: Analysis of concentric shock waves. Journal of Technical Physics 25(1): 35-52

Mohamad Abdel, A.Z.I.Z.; Abdelsayed, G.; Ghrib, F.; Grace, N.F.; Madugula, M.K.S. 2005: Analysis of concrete beams prestressed and post- tensioned with externally unbonded carbon fiber reinforced polymer tendons. Canadian Journal of Civil Engineering 32(6): 1138-1151

Kaliakin, V.N.; Chajes, M.J.; Januszka, T.F. 1996: Analysis of concrete beams reinforced with externally bonded woven composite fabrics. Composites. Part B, Engineering 27(3-4): 235-244

Cluley, N.C.; Shepherd, R. 1996: Analysis of concrete cable-stayed bridges for creep, shrinkage and relaxation effects. Computers and Structures 58(2): 337-350

Karshenas, S.; Ayoub, H. 1994: Analysis of concrete construction live loads on newly poured slabs. Survey results for concrete construction live loads on newly poured slabs - Calcul des charges d'exploitation au cours de la construction s'exerçant sur des salles qui viennent d'être coulées. Résultats d'une enquête sur chantiers. Journal of Structural Engineering 120(5): 1525-1562

Virmani, Y.P.; Jones, W.R. 1988: Analysis of concrete cores from a cathodically protected bridge deck - Analyse de structures en béton d'un tablier de pont sous protection cathodique. Public Roads 51(4): 123-127

Rots, J.G.; De Borst, R. 1989: Analysis of concrete fracture in direct tension - Etude de la rupture du béton en traction «directe». International Journal of Solids and Structures 25(12): 1381-1394

Ramamurthy, K.; Ganesan, T.P. 1993: Analysis of concrete hollow block masonry prisms under eccentric compression - Analyse de blocs de maçonnerie en béton creux et en forme de prismes soumis à des efforts de compression excentrique. Magazine of Concrete Research 45(163): 147-153

Wardeh, G.; Mohamed As, M.O.H.A.M.E.D.; Ghorbel, E. 2011: Analysis of concrete internal deterioration due to frost action. Journal of Building Physics 35(1): 54-82

Jingjong, J.A.N.G.; Hart, G.C. 1995: Analysis of concrete masonry beams - Calcul des poutres en maçonnerie de blocs en béton. Journal of Structural Engineering (New York) 121(11): 1598-1602

Kerr, A.D.; Shade, P.J. 1984: Analysis of concrete pavement blowups - Analyse du flambage (rupture sous l'action de la dilatation) de chaussée en béton. Acta Mechanica 52(3-4): 201-224

Yu, H.T.; Khazanovich, L.; Darter, M.I.; Ardani, A. 1998: Analysis of concrete pavement responses to temperature and wheel loads measured from intrumented slabs. Transportation Research Record (1639): 94-101

Fwa, T.F.; Shi, X.P.; Tan, S.A. 1996: Analysis of concrete pavements by rectangular thick-plate model. Journal of Transportation Engineering 122(2): 146-154

Juilin, P.E.N.G.; Rosowsky, D.V.; Pan, A.D.; Waifah, C.H.E.N.; Siu Lai, C.H.A.N.; Tsong, Y.E.N. 1996: Analysis of concrete placement load effects using influence surfaces. Aci Structural Journal 93(2): 180-186

Safarian, S.S.; Harris, E.C. 1984: Analysis of concrete ring-beam and column systems for silo hopper support: general case - Calcul des systèmes poteaux-poutre circulaire pour les appuis de trémie de silo: cas général. Journal of the American Concrete Institute 81(2): 166-171

Sebastian, W.; Zhang, C. 2008: Analysis of concrete structures across the ductility spectrum. Mag. Concr. Res 60(9): 685-690

Sivakumaran, K.S.; Dilger, W.H. 1984: Analysis of concrete structures subjected to sustained temperature gradients - Analyse de structure en béton soumise à un gradient de température soutenue. Canadian Journal of Civil Engineering 11(3): 404-410

De Borst, R.; Peeters, P.P.J.M. 1989: Analysis of concrete structures under thermal loading - Calcul de structures en béton sous charge thermique. Computer Methods in Applied Mechanics and Engineering 77(3): 293-310

Lewis, P.E.; Miller, D.P.; Shen, S.S.; Anderson, G.P.; Chetwynd, J.; Kroutil, R. 2008: Analysis of concurrent space based and ground based atmospheric infrared spectrometer measurements. Proc. Spie Int. Soc. Opt. Eng 7086: 70860F.1-70860F.17

Oishi, S.; Shirahase, M.; Sado, M.; Oiwa, R. 2003: Analysis of condensation dusts from the heavy oil combustion using TOF-SIMS. Appl. Surf. Sci 203-04: 772-774

Hang, L.O.N.G.; Wei, X.I.A.N.G.; Shanshan, S.H.E.N.; Yueying, Z.H.A.N.G.; Kan, Z.H.E.N.G.; Wenbo, W.A.N.G. 2012: Analysis of Conditional Error Rate and Combining Schemes in HARQ. IEEE Transactions on Signal Processing 60(5): 2677-2682

Hoon, C.H.O.I.; Wei, W.A.N.G.; Trivedi, K.S. 1998: Analysis of conditional MTTF of fault-tolerant systems. Microelectronics and Reliability 38(3): 393-401

Kilmyaninov, V.V. 1992: Analysis of conditions for ice-jam stage formation in the Lena river and their long-term forecasting. Meteorologia i Gidrologia (4): 82-89

Zektser, M.P. 1993: Analysis of conducting-gas channel flow in a self-induced magnetic field. Fluid Dynamics 28(1): 7-13

Wei, D.E.N.G.; Meguid, S.A. 1998: Analysis of conducting rigid inclusion at the interface of two dissimilar piezoelectric materials. Journal of Applied Mechanics 65(1): 76-84

Saxena, T.K.; Shashi, B.A.L.A.; Mathur, P.C.; Hartnagel, H.L. 1984: Analysis of conduction band structure of gallium arsenide in the vicinity of two valley and three valley band models using a physical magnetoresistance effect in the temperature range 300-650 K. Journal of Applied Physics 55(8): 2940-2944

Masood, P.A.R.A.N.G.; Arimilli, R.V.; Ketkar, S.P. 1985: Analysis of conduction heat transfer problems in steady, 2D regions with circular holes using a special boundary integral method. International Communications in Heat and Mass Transfer 12(2): 179-189

Young, K.K. 1989: Analysis of conduction in fully depleted SOI MOSFET's. Ieee Trans. Electron Devices 36(3): 504-506

Dahono, P.A.; Sato, Y.; Kataoka, T. 1995: Analysis of conduction losses in inverters. Iee Proceedings. Electric Power Applications 142(4): 225-232

Sunghun, J.U.N.G.; Sungjun, K.I.M.; Oh, J.H.; Ryoo, K.C.; Lee, J.H.; Hyungcheol, S.H.I.N.; Park, B.G. 2014: Analysis of conduction mechanism in silicon nitride-based RRAM. IEEE Inec International Nanoelectronics Conference 11(1-4): 167-177

Talukdar, P.; Mishra, S.C. 2002: Analysis of conduction-radiation problem in absorbing, emitting and anisotropically scattering media using the collapsed dimension method. International Journal of Heat and Mass Transfer 45(10): 2159-2168

Clauser, C.; Villinger, H. 1990: Analysis of conductive and convective heat transfer in a sedimentary basin, demonstrated for the Rheingraben - Analyse du transfert de chaleur par conduction et par convection dans un bassin sédimentaire, exemple du Fossé Rhénan. Geophysical Journal (Oxford) 100(3): 393-414

Zoras, S.; Dimoudi, A.; Kosmopoulos, P. 2012: Analysis of conductive temperature variation due to multi-room underground interaction. Energy and Buildings 55: 433-438

Viviani, M.; Buscaglia, M.T.; Buscaglia, V.; Mitoseriu, L.; Testino, A.; Nanni, P.; Vladikova, D. 2004: Analysis of conductivity and PTCR effect in Er-doped BaTiO3ceramics. J. Eur. Ceram. Soc 24(6): 1221-1225

Yanagisawa, H.; Orihara, H.; Ishibashi, Y. 1994: Analysis of conductivity data of KSnOPO4 (KSP) single crystal. Journal of the Physical Society of Japan 63(11): 4078-4081

Almond, D.P.; Duncan, G.K.; West, A.R. 1985: Analysis of conductivity prefactors and ion hopping rates in AgI-Ag2 MoO4 glass. Journal of Non-Crystalline Solids 74(2-3): 285-301

Ferracin, P.; Rastogi, P.; Scandale, W.; Todesco, E.; Tropea, P. 2002: Analysis of conductor displacements in the coil of the LHC main dipole by speckle interferometry. Ieee Trans. Appl. Supercond 12(1): 1709-1712

Van Deventer, T.E.; Katehi, L.P.B.; Cangellaris, A.C. 1994: Analysis of conductor losses in high-speed interconnects. IEEE Transactions on Microwave Theory and Techniques 42(1): 78-83

Yu, H.S.; Mitchell, J.K. 1998: Analysis of cone resistance : Review of methods. Journal of Geotechnical and Geoenvironmental Engineering 124(2): 140-149

Alothman, A.K.; Irving, M.R. 2006: Analysis of confidence bounds in power system state estimation with uncertainty in both measurements and parameters. Electric Power Systems Research 76(12): 1011-1018

Bandyopadhyay, S.; Ghosal, A. 2004: Analysis of configuration space singularities of closed-loop mechanisms and parallel manipulators. Mechanism and Machine Theory 39(5): 519-544

Baltus, R.E.; Raju Badireddy, A.; Wendong, X.U.; Chellam, S. 2009: Analysis of Configurational Effects on Hindered Convection of Nonspherical Bacteria and Viruses across Microfiltration Membranes. Industrial and Engineering Chemistry Research 48(5): 2404-2413

Lourenco, S.A.; Teodoro, M.D.; Gonzalezborrero, P.P.; Dias, I.F.L.; Duarte, J.L.; Mareg, E.; Salamo, G.J. 2012: Analysis of confinement potential fluctuation and band-gap renormalization effects on excitonic transition in GaAs/AlGaAs multiquantum wells grown on (1 0 0) and (3 1 1)A GaAs surfaces. Physica. B, Condensed Matter 407(12): 2131-2135

Kempe, M.; Rudolph, W. 1993: Analysis of confocal microscopy under ultrashort light-pulse illumination. Journal of the Optical Society of America. A, Optics and Image Science 10(2): 240-245

Faller, J.W.; Whitmore, B.C. 1986: Analysis of conformational isomers of molybdenum allyl complexes using 95Mo NMR spectroscopy. Organometallics 5(4): 752-755

Nazeer, M.M.; Afzal Khan, M.; Naeem, A.; Haq, A.U. 2000: Analysis of conical tool perforation of ductile metal sheets. International Journal of Mechanical Sciences 42(7): 1391-1403

Corkill, J.A. 1988: Analysis of conifer needles by headspace capillary gas chromatography. Hrc & Cc. J. High Resolut. Chromatogr. Chromatogr. Commun 11(2): 211-214

Haisma, H.J.; Boven, E.; Van Muijen, M.; De Vries, R.; Pinedo, H.M. 1992: Analysis of conjugate between anti-carcinoembryonic antigen monoclonal antibody and alkaline phosphatase for specific activation of the prodrug etoposide phosphate. Cancer Immunology and ImmunoTherapy 34(5): 343-348

Pi Sheng, C.H.A.N.G.; Willson, A.N. 2000: Analysis of conjugate gradient algorithms for adaptive filtering. IEEE Transactions on Signal Processing 48(2): 409-418

Zhaogao, L.U.A.N.; Khonsari, M.M. 2009: Analysis of conjugate heat transfer and turbulent flow in mechanical seals. Tribology International 42(5): 762-769

Subhasis, R.A.Y.; Srinivasan, J. 1992: Analysis of conjugate laminar mixed convection cooling in a shrouded array of electronic components. International Journal of Heat and Mass Transfer 35(4): 815-822

Yeh, J.P.; Shaw, H.J.; Huang, M.J. 1990: Analysis of conjugate laminar natural convection between finitely top heating vertical channel flow. Warme- und Stoffubertragung 25(6): 321-329

Scalia, S.; Games, D.E. 1992: Analysis of conjugated bile acids by on-line supercritical fluid chromatography/thermospray mass spectrometry. Org. Mass Spectrom 27(11): 1266-1270

Sunden, B. 1989: Analysis of conjugated laminar and turbulent forced convection-conduction heat transfer of a plate fin. International Communications in Heat and Mass Transfer 16(6): 821-831

Dubeikovsky, A.N.; Boronin, A.M. 1992: Analysis of conjugational system of broad host range plasmid pBS1001. Soviet Genetics 28(10): 1256-1260

Alvarez, A.E.; Macias, N.; Fuentes, L.G. 2012: Analysis of Connected Air Voids in Warm Mix Asphalt. Dyna (Medellin) 172: 29-37

Tsubouchi, C.; Horikawa, T. 2000: Analysis of connecting rod fatigue fracture surface by X-ray fractography. Zairyo 49(10): 1143-1147

Wosinska, L.; Svensson, T.K. 2007: Analysis of connection availability in an all-optical mesh network. Fiber and Integrated Optics 26(2): 99-110

Xiang, L.U.; Zhe, W.A.N.G.; Wosinska, L. 2006: Analysis of connection availability in optical networks with multi-failure assumption. Proc. Spie Int. Soc. Opt. Eng: 619318.1-619318.8

Hsu, H.H.; Ishigure, T.; Nakagawa, S. 2013: Analysis of Connection Loss for a GI Waveguide Based Optical Link Using the Finite Difference Beam Propagation Method. Journal of Lightwave Technology 31(9-12): 2036-2042

Susurkin, V.R.; Ershov, V.I.; Lepeshev, V.Y. 1991: Analysis of connection process of a vacuum switch. Soviet Electrical Engineering 62(1): 16-18

Axvig, N.; Dreher, D.; Morrison, K.; Psota, E.; Perez, L.C.; Walker, J.L. 2009: Analysis of Connections Between Pseudocodewords. IEEE Transactions on Information Theory 55(9): 4099-4107

Weijia, J.I.A.; Yingjie, F.U.; Jianxin, W.A.N.G. 2004: Analysis of connectivity for sensor networks using geometrical probability. Lect. Notes Comput. Sci: 601-611

Jia, W.; Wang, J. 2006: Analysis of connectivity for sensor networks using geometrical probability. Iee Proceedings. Communications 153(2): 305-312

Mamardasvili, M. 1986: Analysis of Consciousness in the Works of Marx. Studies in Soviet Thought 32(2): 101-120

Putaala, J.; Metso, A.J.; Metso, T.M.; Konkola, N.; Kraemer, Y.; Haapaniemi, E.; Kaste, M.; Tatlisumak, T. 2009: Analysis of 1008 Consecutive Patients Aged 15 to 49 With First-Ever Ischemic Stroke : The Helsinki Young Stroke Registry. Stroke (1970) 40(4): 1195-1203

Plotnick, H. 1990: Analysis of 250 consecutively evaluated cases of workers' disability claims for dermatitis. Archives of Dermatology (1960) 126(6): 782-786

Thompson, M.W.; Hersh, L.B. 2003: Analysis of conserved residues of the human puromycin-sensitive aminopeptidase. Peptides (New York, Ny 1980) 24(9): 1359-1365

Robinson, R.G.; Allam, M.M. 1998: Analysis of consolidation data by a non-graphical matching method. Astm Geotechnical Testing Journal 21(2): 140-143

Saji, A.; Noda, H.; Takamura, Y.; Watanabe, F.; Matsuda, H.; Hasatani, M. 1997: Analysis of consolidation method of CO2 clathrate for CO2 disposal in deep ocean. Kagaku Kogaku Ronbunshu 23(4): 482-490

Shirato, M.; Murase, T.; Iritani, E.; Nakatsuka, S. 1986: Analysis of consolidation process in filter cake dewatering by use of difficult-to-filter slurries. J. Chem. Eng. Jpn 19(6): 587-592

Uppal, J.S.; Harrison, R.G. 1990: Analysis of constant and periodic emission field characteristics of optically pumped three-level lasers. IEEE Journal of Quantum Electronics 26(2): 329-336

Iwata, M.; Mohammed Saedi, J.A.M.I.; Sato, M. 2007: Analysis of constant-current electro-osmotic dewatering of various solid-liquid systems by considering the creep deformation. Ecfs 2006 European Conference on Filtration and Separation 58(2): 274-281

Sohn, Y.H.; Dayananda, M.A.; Hofman, G.L.; Strain, R.V.; Hayes, S.L. 2000: Analysis of constituent redistribution in the γ (bcc) U-Pu-Zr alloys under gradients of temperature and concentrations. Journal of Nuclear Materials 279(2-3): 317-329

Lin, H.P.; Hwu, J.G. 2007: Analysis of constitution and characteristics of lateral nonuniformity effects of MOS devices using QM-based terman method. Ieee Trans. Electron Devices 54(11): 3064-3070

Pieczarka, J.C.; Nagamachi, C.Y.; Barros, R.M.S.; Mattevi, M.S. 1996: Analysis of constitutive heterochromatin by fluorochromes and in situ digestion with restriction enzymes in species of the group Callithrix argentata (Callitrichidae, primates). Cytogenet. Cell Genet 72(4): 325-330

Chokshi, A.H. 1987: Analysis of constrained cavity growth during high temperature creep deformation - Analyse de la croissance entravée des cavités lors d'une déformation de fluage à haute température. Materials Science and Technology 3(8): 656-664

Tang, S.J.; Lumsdaine, A. 2008: Analysis of Constrained Damping Layers, Including Normal-Strain Effects. Aiaa Journal 46(12): 2998-3011

Ali, R.; Mahapatra, D.R.; Gopalakrishnan, S. 2005: Analysis of constrained piezoelectric layer : A two-dimensional coupled electromechanical model. Asian Meeting on Ferroelectricity 329: 131-137

Ali, R.; Gopalakrishman, S. 2007: Analysis of constrained piezoelectric thin film sensor. Proc. Spie Int. Soc. Opt. Eng: 641309.1-641309.12

Deriglazov, A.A. 2005: Analysis of constrained theories without use of primary constraints. Physics Letters. Section B 626: 243-248

Martin, J.T.; Lambert, S.B. 1996: Analysis of constraint in single edge notch tension specimens using the T-stress. International Journal of Pressure Vessels and Piping 65(1): 13-19

Liu, X.L.; Lee, H.M.; Chen, W.F. 1988: Analysis of construction loads on slabs and shores by personal computer - Analyse des charges de construction sur les dalles et les coffrages par microordinateur. Concrete International 10(6): 21-30

Xinyu, H.U.A.N.G.; Hinze, J. 2003: Analysis of construction worker fall accidents. Journal of Construction Engineering and Management 129(3): 262-271

Umunna Nwachukwu, M.; Chike Mba, H. 2012: Analysis of consumption pattern of highway transportation fuel in Nigeria. Opec Energy Review 36(1): 25-34

Nilsson, U.; Bergh, M.; Shao, L.P.; Karlberg, A.T. 1996: Analysis of contact allergenic compounds in oxidized d-limonene. Chromatographia (Wiesbaden) 42(3-4): 199-205

Ganghoffer, J.F.; Schultz, J. 1998: Analysis of contact and rupture behaviour under non-constant contact surface conditions. The Journal of Adhesion 65(1-4): 25-56

Lovell, M. 1998: Analysis of contact between transversely isotropic coated surfaces : development of stress and displacement relationships using FEM. Wear 214(2): 165-174

Barone, F.; Di Fiore, L.; Milano, L.; Russo, G. 1993: Analysis of contact binary systems: AA Ursae Majoris, V752 Centauri, AO Camelopardalis, and V677 Centauri. The Astrophysical Journal 407(1): 237-251

Ono, K.; Yamane, M. 2007: Analysis of contact characteristics of small rough surfaces taking bulk deformation and meniscus force into consideration. Journal of Tribology 129(3): 453-460

Bai, M.; Kato, K. 2001: Analysis of contact deformation and stiction between textured disk and textured slider. Journal of Tribology 123(2): 350-357

Rapisarda, M.; Valletta, A.; Daami, A.; Jacob, S.; Benwadih, M.; Coppard, R.; Fortunato, G.; Mariucci, L. 2012: Analysis of contact effects in fully printed p-channel organic thin film transistors. Organic Electronics 13(10): 2017-2027

Sohn, C.W.; Rim, T.U.; Choi, G.B.; Jeong, Y.H. 2010: Analysis of Contact Effects in Inverted-Staggered Organic Thin-Film Transistors Based on Anisotropic Conduction. Ieee Trans. Electron Devices 57(5): 986-994

Skalski, K.; Morawski, A.; Przybylski, W. 1995: Analysis of contact elastic-plastic strains during the process of burnishing. International Journal of Mechanical Sciences 37(5): 461-472

Seo, J.W.; Kwon, S.J.; Lee, D.H.; Choi, H.Y. 2013: Analysis of contact fatigue crack growth using twin-disc tests and numerical evaluations. International Journal of Fatigue 55: 54-63

Chung Kyun, K.I.M.; Woo Jeon, S.H.I.M. 1997: Analysis of contact force and thermal behaviour of lip seals. Tribology International 30(2): 113-119

Wilson, K.C. 1984: Analysis of contact-load distribution and application to deposition limit in horizontal pipes. Journal of Pipelines 4(3): 171-176

Shia, C.Y.; Stango, R.J.; Heinrich, S.M. 1998: Analysis of contact mechanics for a circular filamentary brush/workpart system. Journal of Manufacturing Science and Engineering 120(4): 715-721

Stango, R.J.; Zhao, H.; Shia, C.Y. 2003: Analysis of contact mechanics for rotor-bristle interference of brush seal. Journal of Tribology 125(2): 414-421

Chen, W.Z.; Cheng, S.M.; Luo, Z.; Gu, W.M. 1995: Analysis of contact melting of phase change materials inside a heated rectangular capsule. International Journal of Energy Research 19(4): 337-345

Beal, P.; Touzani, R. 2003: Analysis of contact of elastic rods subject to large displacements. Applied Mathematics Letters 16(4): 619-625

Seokhwan, K.I.M.; Geonyup, L.I.M.; Park, N.C.; Park, Y.P.; Lee, H.C.; Kim, J.H.; Park, K.S. 2013: Analysis of contact phenomena between a head stack assembly and disk during operational shock. 2012 Asme-Isps/Jsme-Iip Joint International Conference on Micromechatronics for Information and Precision Equipment 19(9-10): 1587-1593

Pires, E.B.; Oden, J.T. 1983: Analysis of contact problems with friction under oscillating loads. Computer Methods in Applied Mechanics and Engineering 39(3): 337-362

Fang, W. 1993: Analysis of contact resistivity for multilevel transistors. Journal of Mathematical Analysis and Applications 176(2): 594-607

Czyzewski, T.; Odman, M.T. 1988: Analysis of contact stress and deformation in a trilobe polygonal connection. Journal of Engineering for Industry 110(3): 212-217

Andersson, C.H. 1997: Analysis of contact stresses due to combined bending and sliding of high-performance fibers. Mechanics of Composite Materials 33(2): 101-106

Kopey, B.V.; Maksymuk, A.V.; Shcherbyna, N.N. 2000: Analysis of contact stresses in structural joints of composite shell with steel banding. Mechanics of Composite Materials 36(1): 67-74

Lockwood, J.R.; Schervish, M.J.; Gurian, P.L.; Small, M.J. 2004: Analysis of contaminant co-occurrence in community water systems. Journal of the American Statistical Association 99(465): 45-56

Chen, J.S.; Wu, C.L.; Liu, C.W. 2010: Analysis of contaminant transport towards a partially penetrating extraction well in an anisotropic aquifer. Hydrological Processes 24(15): 2125-2136

Picard, A.; Bastien, J.; Massicotte, B. 2000: Analysis of continuous beams prestressed with localized tendons - Calcul des poutres continues précontraintes avec des câbles localisés (non continus sur toute la longueur de la portée). Journal of Structural Engineering (New York) 126(2): 262-265

Kermani, B.; Waldron, P. 1993: Analysis of continuous box girder bridges including the effects of distortion. Computers and Structures 47(3): 427-440

Tanaka, H.; Kuwatori, H.; Nisihara, R. 1992: Analysis of continuous casting powder entrapping phenomena by water-model experiments. Tetsu-To-Hagane 78(5): 761-766

Bosniakowski, S.; Bergmann, R. 1988: Analysis of continuous circular cylindrical shells. Journal of Engineering Mechanics 114(3): 433-455

Fabbrocino, G.; Manfredi, G.; Cosenza, E. 2000: Analysis of continuous composite beams including partial interaction and bond - Calcul des poutres composites continues incluant les effets de l'intéraction partielle et de l'adhérence. Journal of Structural Engineering (New York) 126(11): 1288-1294

Azad, A.K.; Baluch, M.H.; Aejaz, A.L.I. 1989: Analysis of continuous curved girder-slab bridges - Calcul des ponts courbes continus à poutre-dalle. Canadian Journal of Civil Engineering 16(6): 895-901

Martin Bland, J.; Altman, D.G. 2009: Analysis of continuous data from small samples. Bmj. British Medical Journal (International Ed.) 339(7727): 961-962

Harari, I.; Hughes, T.J.R. 1992: Analysis of continuous formulations underlying the computation of time-harmonic acoustics in exterior domains. Computer Methods in Applied Mechanics and Engineering 97(1): 103-124

Ohga, M.; Shigematsu, T. 1990: Analysis of continuous plates by a combined boundary element-transfer matrix method. Computers and Structures 36(1): 81-89

Ratzlaff, K.P.; Kennedy, D.J.L. 1985: Analysis of continuous steel plates subjected to uniform transverse loads. Canadian Journal of Civil Engineering 12(3): 685-699

Pal, S.; Protter, P. 2010: Analysis of continuous strict local martingales via h-transforms. Stochastic Processes and their Applications 120(8): 1424-1443

Lapin, S.V.; Egupov, N.D. 1992: Analysis of continuous time-varying non-linear systems using block-pulse expansions. International Journal of Systems Science 23(7): 1201-1212

Patnaik, S.N.; Nagaraj, M.S. 1987: Analysis of continuum by the integrated force method. Computers and Structures 26(6): 899-905

Patnaik, S.N.; Satish, H.G. 1990: Analysis of continuum using boundary compatibility conditions of integrated force method. Computers and Structures 34(2): 287-295

Elliott, R.P.; Qiu, Y. 1996: Analysis of contractor pay adjustment schedule using simulation. Transportation Research Record (1544): 109-115

Schnute, J.T.; Hilborn, R. 1993: Analysis of contradictory data sources in fish stock assessment. Canadian Journal of Fisheries and Aquatic Sciences 50(9): 1916-1923

Matsuhata, H.; Yamaguchi, H.; Ohno, T. 2012: Analysis of contrasts and identifications of Burgers vectors for basal-plane dislocations and threading edge dislocations in 4H-SiC crystals observed by monochromatic synchrotron X-ray topography in grazing-incidence Bragg-case geometry. Philosophical Magazine (2003. Print) 92(34-36): 4599-4617

Jung, E.; Min Soo, K.I.M.; Kim, H. 2013: Analysis of Contributing Factors for Determining the Reliability Characteristics of GaN-Based White Light-Emitting Diodes With Dual Degradation Kinetics. Ieee Trans. Electron Devices 60(1): 186-191

Funaki, A.; Kondo, K.; Kanai, T. 2011: Analysis of Contributing Factors to Production of Highly Transparent Isotactic Polypropylene Extrusion Sheets. Part 2. Polymer Engineering and Science 51(6): 1068-1077

Funaki, A.; Kanai, T.; Saito, Y.; Yamada, T. 2010: Analysis of Contributing Factors to Production of Highly Transparent Isotactic Polypropylene Extrusion Sheets. Part I. Polymer Engineering and Science 50(12): 2356-2365

Roeck, W.W.; Martin, J.T.; Beach, R. 1992: Analysis of contributing factors to the occurence of off-focus radiation (OFR). Medical Physics (Lancaster) 19(5): 1201-1204

Yamaguchi, M.; Saito, T.; Izumitani, M.; Sugita, S.; Tsutsumi, Y. 1990: Analysis of control characteristics using fuel cell plant simulator. IEEE Transactions on Industrial Electronics (1982) 37(5): 378-386

Khammash, M.H.; Vittal, V.; Pawloski, C.D. 1994: Analysis of control performance for stability robustness of power systems. IEEE Transactions on Power Systems 9(4): 1861-1867

Murrietaduenas, R.; Gutierrezguerra, R.; Segoviahernandez, J.G.; Hernandez, S. 2011: Analysis of control properties of intensified distillation sequences: Reactive and extractive cases. Chemical Engineering Research and Design 89(11): 2215-2227

Cardenas, J.C.; Hernandez, S.; Gudinomares, I.R.; Esparzahernandez, F.; Iriandaaraujo, C.Y.; Dominguezlira, L.M. 2005: Analysis of control properties of thermally coupled distillation sequences for four-component mixtures. Industrial and Engineering Chemistry Research 44(2): 391-399

Yamashita, K.; Murata, I.; Shindo, R.; Tokuhara, K.; Werner, H. 1994: Analysis of control rod reactivity worths for AVR power plant at cold and hot conditions. Journal of Nuclear Science and Technology 31(5): 470-478

Arteconi, A.; Costola, D.; Hoes, P.; Hensen, J.L.M. 2014: Analysis of control strategies for thermally activated building systems under demand side management mechanisms. Energy and Buildings 80: 384-393

Luyben, M.L.; Tyreus, B.D.; Luyben, W.L. 1996: Analysis of control structures for reaction/separation/recycle processes with second-order reactions. Industrial and Engineering Chemistry Research 35(3): 758-771

Stout, T. 2000: Analysis of control systems for glass furnace applications. The Glass Industry 81(3): 33-36

Mustafaev, R.I.; Kurdyukov Yu, M.; Listengarten, B.A. 1989: Analysis of control systems for the output capacity of wind-power stations. Elektricestvo (7): 1-6

Chen, C.F.; Wu, J.L. 1997: Analysis of control systems involving irrational transfer function evaluation via Haar wavelets. Control and Computers 25(1): 5-11

Zhirabok, A.N.; Shlikht, A.G. 1992: Analysis of controllability of dynamic systems. Journal of Computer and System Sciences International 30(6): 40-46

Li, C.A.O.; Hua, Z.H.A.O.; Xi, J.I.A.N.G. 2008: Analysis of Controlled Auto-Ignition/Hcci Combustion in a Direct Injection Gasoline Engine with Single and Split Fuel Injections. Combustion Science and Technology 180(1-3): 176-205

Brinson, L.C.; Huang, M.S.; Boller, C.; Brand, W. 1997: Analysis of controlled beam deflections using SMA wires. Journal of Intelligent Material Systems and Structures 8(1): 12-25

Ratto, M.; Paladino, O. 2000: Analysis of controlled CSTR models with fluctuating parameters and uncertain parameters. Chemical Engineering Journal (1996) 79(1): 13-21

Adrover, A.; Giona, M.; Grassi, M. 1996: Analysis of controlled release in disordered structures : a percolation model. J. Membr. Sci 113(1): 21-30

Gonzalez, R.O.; Gribaudo, L.M. 2005: Analysis of controversial zones of the Zr-Cr equilibrium diagram. Journal of Nuclear Materials 342(1-3): 14-19

Ba, M.B.; Nicholson, S.E. 1998: Analysis of convective activity and its relationship to the rainfall over the Rift Valley lakes of East Africa during 1983-90 using the Meteosat infrared channel. Journal of Applied Meteorology (1988) 37(10): 1250-1264

Okamoto, N. 1988: Analysis of convective diffusion problem with first-order chemical reaction by boundary element method. International Journal for Numerical Methods in Fluids 8(1): 55-64

Saneineiad, S.; Moonen, P.; Defraeye, T.; Carmeliet, J. 2011: Analysis of convective heat and mass transfer at the vertical walls of a street canyon. J. Wind Eng. Ind. Aerodyn 99(4): 424-433

Defraeye, T.; Blocken, B.; Carmeliet, J. 2012: Analysis of convective heat and mass transfer coefficients for convective drying of a porous flat plate by conjugate modelling. International Journal of Heat and Mass Transfer 55(1-3): 112-124

Allegrini, J.; Dorer, V.; Carmeliet, J. 2012: Analysis of convective heat transfer at building façades in street canyons and its influence on the predictions of space cooling demand in buildings. J. Wind Eng. Ind. Aerodyn 104-06: 464-473

Rocamora, F.D.; De Lemos, M.J.S. 2000: Analysis of convective heat transfer for turbulent flow in saturated porous media. International Communications in Heat and Mass Transfer 27(6): 825-834

Anantharaman, V.; Pintauro, P.N.; Nanis, L. 1989: Analysis of convective mass transfer by potential relaxation. I: Steady-state copper deposition with laminar natural convection stirring. Journal of the Electrochemical Society 136(6): 1727-1733

Vohra, M.; Pintauro, P.N. 1990: Analysis of convective mass transfer by potential relaxation. II: Transient natural convection copper deposition. Journal of the Electrochemical Society 137(1): 141-148

Roy, S.; Pintauro, P.N. 1990: Analysis of convective mass transfer by potential relaxation. III, Active and passive copper dissolution at a rotating disk. Journal of the Electrochemical Society 137(8): 2502-2509

Pintauro, P.N.; Roy, S. 1992: Analysis of convective mass transfer by potential relaxation. IV: Active, prepassive, and transpassive iron dissolution at a rotating disk. Journal of the Electrochemical Society 139(1): 177-186

Sudipta, R.O.Y.; Pintauro, P.N. 1993: Analysis of convective mass transfer by potential relaxation. V: Copper deposition in the presence of organic plating additives. Journal of the Electrochemical Society 140(11): 3167-3175

Escriva, X.; Giovannini, A. 2003: Analysis of convective momentum and wall heat transfer: application to vortex boundary layer interaction. International Journal of Heat and Mass Transfer 46(13): 2471-2483

Soriano, L.R.; De Pablo, F. 2003: Analysis of convective precipitation in the western Mediterranean Sea through the use of cloud-to-ground lightning. Atmospheric Research 66(3): 189-202

Kakac, S.; Liping, C.A.O. 2009: Analysis of convective two-phase flow instabilities in vertical and horizontal in-tube boiling systems. International Journal of Heat and Mass Transfer 52(17-18): 3984-3993

Perreydebain, E. 1999: Analysis of convergence and accuracy of the DRBEM for axisymmetric Helmholtz-type equation. Engineering Analysis with Boundary Elements 23(8): 703-711

Wakimoto, R.M.; Murphey, H.V. 2010: Analysis of Convergence Boundaries Observed during IHOP_2002. Monthly Weather Review 138(7): 2737-2760

Neagoe, C.; Ossart, F. 1994: Analysis of convergence in nonlinear maggnetostatic finite elements problems. Ieee Trans. Magn 30(5): 2865-2868

Geveci, T. 1983: Analysis of convergence of numerical methods. International Series of Numerical Mathematics 66: 76-133

Dey, S.K. 2000: Analysis of convergence of parallelized PFI for coupled large-scale nonlinear systems. International Journal of Computer Mathematics 75(4): 527-542

Mao, C.Y.; Hu, Y.H. 1996: Analysis of convergence properties of a stochastic evolution algorithm. IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems 15(7): 826-831

Iizuka, A.; Nakamoto, G.; Naito, K.; Homma, T.; Nakao, H.; Okuno, K.; Osaka, T. 1999: Analysis of conversion on direct copper plating using Pd/Sn mixed catalyst. Hyomen Gijutsu 50(10): 915-922

Bhuvaneswari, G.; Mahanta, B.C. 2009: Analysis of Converter Transformer Failure in HVDC Systems and Possible Solutions. IEEE Transactions on Power Delivery 24(2): 814-821

Chuanhe, S.H.E.N.; Xiangrong, W.A.N.G. 2011: Analysis of Convertible Bond Value Based on Integration of Support Vector Machine and Copula Function. Commun. Stat., Simul. Comput 40(8-10): 1563-1575

Chen, S.L.; Ke, M.T.; Sung, P.S.; Huang, C.W.; Yen, J.L. 1992: Analysis of cool storage for air conditioning. International Journal of Energy Research 16(6): 553-563

Siegel, R.; Snyder, A. 1983: Analysis of coolant entrance boundary shape of porous region to control cooling along exit boundary. Journal of Heat Transfer 105(3): 513-518

Umasankari, K.; Ganesan, S. 2011: Analysis of Coolant Void Reactivity of Advanced Heavy Water Reactor Through Isotopic Reaction Rates. Nuclear Science and Engineering 167(2): 105-121

Hudgens, R.D.; Bugelski, W.G. 1990: Analysis of coolants from diesel engines. Sae Transactions 99(2): 136-156

Wu, Q.I.N.G.B.A.I.; Lu, Z.I.J.I.A.N.; Tingjun, Z.H.A.N.G.; Ma, W.E.I.; Liu, Y.O.N.G.Z.H.I. 2008: Analysis of cooling effect of crushed rock-based embankment of the Qinghai-Xizang Railway. Cold Regions Science and Technology 53(3): 271-282

Usha, R.; Ravindran, R. 2003: Analysis of cooling of a conducting fluid film of non-uniform thickness on a rotating disk. International Journal of Non-Linear Mechanics 39(1): 153-164

Nansai, H.U.; Yao, Y.D.; Zhuo, Y.A.N.G. 2013: Analysis of Cooperative TDMA in Rayleigh Fading Channels. IEEE Transactions on Vehicular Technology 62(3): 1158-1168

Chrysanthou, C.; Boksiner, J. 1997: Analysis of coordination between primary and secondary protectors. IEEE Transactions on Power Delivery 12(4): 1501-1507

Yamamoto, T.; Kudo, T.; Yamamoto, T.; Kawai, J. 2013: Analysis of coordination environment of aluminum species in zeolites and amorphous silica-alumina by X-ray absorption and emission spectroscopy. Microporous and Mesoporous Materials 182: 239-243

Ferraritrecate, G.; Buffa, A.; Gati, M. 2006: Analysis of coordination in multi-agent systems through partial difference equations. IEEE Transactions on Automatic Control 51(6): 1058-1063

Mami, A.; Gharsallah, A.; Gharbi, A.; Baudrand, H. 2003: Analysis of coplanar components by using an iterative method. International Journal of Electronics 90(3): 201-210

Das, B.N.; Raju, G.S.N.; Chakraborty, A. 1988: Analysis of coplanar E―H plane T-junction using dissimilar rectangular waveguides. IEEE Transactions on Microwave Theory and Techniques 36(3): 604-606

Mhamed, D.R.I.S.S.I.; Hanna, V.F.; Citerne, J. 1991: Analysis of coplanar waveguide radiating end effects using the integral equation technique. IEEE Transactions on Microwave Theory and Techniques 39(1): 112-116

Kim, Y.G.; Kang Wook, K.I.M. 2012: Analysis of Coplanar Waveguide With a Bottom Ground Aperture. IEEE Microwave and Wireless Components Letters 22(11): 550-552

Janiczak, B.J. 1984: Analysis of coplanar waveguide with finite ground planes. Aeu. Archiv für Elektronik und Ubertragungstechnik 38(5): 341-342

Wood, K.B.; Stannett, V.T. 1992: Analysis of copolymerization systems involving multiple reaction pathways. Journal of Polymer Science. Part A. Polymer Chemistry 30(1): 13-19

Chen, C.C.; Lin, C.E. 1996: Analysis of copper corrosion inhibitors by capillary zone electrophoresis. Analytica Chimica Acta 321(2-3): 215-218

Elwazri, A.M.; Fatehi, A.; Calvo, J.; Bai, D.; Yue, S. 2008: Analysis of Copper Effect on Microstructures and Mechanical Properties in Microalloyed Steels. Isij International 48(1): 107-113

Jiang, Q.T.; Nowell, M.; Foran, B.; Frank, A.; Havemann, R.H.; Parihar, V.; Augur, R.A.; Luttmer, J.D. 2002: Analysis of copper grains in damascene trenches after rapid thermal processing or furnace anneals. J. Electron. Mater 31(1): 10-15

Leiva, A.M.; Rivera, L.; Loeb, B. 1991: Analysis of copper(I) stability in the cationic [Cu(CH3CN)4-n(Ph3P)n]+ series of complexes. Polyhedron 10(3): 347-350

Yoon, J.; Lee, J.; Choi, H.; Park, J.B.; Seong, D.J.; Lee, W.; Cho, C.; Kim, S.; Hwang, H. 2009: Analysis of copper ion filaments and retention of dual-layered devices for resistance random access memory applications. Insulating Films on Semiconductors. International Conference 86(7-9): 1929-1932

Zhijun, J.I.A.; Cuiwei, D.U.; Dongdong, Z.H.A.N.G.; Xiaogang, L.I. 2011: Analysis of Copper Pitting Failure in Drinking Water Distribution System. Journal of Failure Analysis and Prevention 11(2): 152-157

Vidrevich, M.B.; Uritskaya, A.A.; Kitaev, G.A.; Mellikov, E.Y.; Krunks, M.I. 1984: Analysis of copper sulfides at various oxidation levels by paste electrode voltametry - Analyse von Kupfersulfiden bei verschiedenen Oxidationsstufen durch Pasten-Elektroden-Voltametrie. Zavodskaa Laboratoria 50(1): 17-19

Kaltofen, E. 1995: Analysis of Coppersmith's block Wiedemann algorithm for the parallel solution of sparse linear systems. Mathematics of Computation 64(210): 777-806

De Bustos, C.; De Stahl, T.D.; Piotrowski, A.; Mantripragada, K.K.; Buckley, P.G.; Darai, E.; Hansson, C.M.; Grigelionis, G.; Menzel, U.; Dumanski, J.P. 2006: Analysis of copy number variation in the normal human population within a region containing complex segmental duplications on 22qll using high-resolution array-CGH. Genomics (San Diego, Calif.) 88(2): 152-162

Tianzhang, Y.E.; Lipska, B.K.; Ran, T.A.O.; Hyde, T.M.; Liqin, W.A.N.G.; Chao, L.I.; Choi, K.H.; Straub, R.E.; Kleinman, J.E.; Weinberger, D.R. 2012: Analysis of Copy Number Variations in Brain DNA from Patients with Schizophrenia and Other Psychiatric Disorders. Biological Psychiatry (1969) 72(8): 651-654

Hassis, H.; Miraoui, I.; Pidaparti, R. 2006: Analysis of cord-composite plates using a higher order formulation. European Journal of Mechanics. A. Solids 25(3): 437-446

Song, G.; Chandrashekhara, K.; Breig, W.F.; Klein, D.L.; Oliver, L.R. 2005: Analysis of cord-reinforced poly-rib serpentine belt drive with thermal effect. Journal of Mechanical Design (1990) 127(6): 1198-1206

Pidadarti, R.M.V. 1997: Analysis of cord-rubber composite laminates under combined tension and torsion loading. Composites. Part B, Engineering 28(4): 433-438

Lin, P.M.; Wickert, J.A. 2003: Analysis of core buckling defects in sheet metal coil processing. Journal of Manufacturing Science and Engineering 125(4): 771-777

Ikeda, T.; Terada, M.; Karasawa, H.; Nakahara, K.; Yamagishi, M. 2003: Analysis of core degradation and fission products release in Phebus FPT1 test at IRSN by detailed severe accidents Analysis code, IMPACT/SAMPSON. Journal of Nuclear Science and Technology 40(8): 591-603

Jupen, C.; Engstrom, L.; Hutton, R.; Reistad, N.; Westerlind, M. 1990: Analysis of core-excited n=3 configurations in S VI, CI VII, Ar VIII and Ti XII. Physica Scripta 42(1): 44-50

Lambrecht, W.R.L. 1986: Analysis of core-level shifts in some metallic Ni compounds - Analyse des déplacements des niveaux de cœur dans quelques composés de Ni métalliques. Physical Review. B, Condensed Matter 34(10): 7421-7424

Tanabe, F. 2011: Analysis of Core Melt Accident in Fukushima Daiichi-Unit 1 Nuclear Reactor. Journal of Nuclear Science and Technology 48(8): 1135-1139

Koyamada, Y. 2000: Analysis of core-mode to radiation-mode coupling in fiber bragg gratings with finite cladding radius. Journal of Lightwave Technology 18(9): 1220-1225

Yokota, T.; Nakao, Y.; Johzaki, T.; Mima, K. 2006: Analysis of core plasma heating in fast ignition target by two-dimensional Fokker-Planck-Hydro code. J. Phys., Iv 133: 433-436

Tsuda, K.; Itami, A.; Kubo, Y.; Shakudo, T.; Kreuter, D.; Anegawa, T.; Kitamura, H.; Ishikawa, M. 1997: Analysis of core stability measurement data of advanced 9 x 9 fuel assembly in a BWR core. Journal of Nuclear Science and Technology 34(5): 510-520

Insler, M.S.; Cooper, H.D.; Caldwell, D.R. 1985: Analysis of corneal thickness and endothelial cell density in pseudophakic and aphakic patients undergoing penetrating keratoplasty. Archives of Ophthalmology (1960) 103(3): 390-393

Lim, B.W.; Korolkiewicz, E.; Scott, S. 1995: Analysis of corner microstrip fed patch antenna. Electronics Letters 31(9): 691-693

Fu, H.Z.; Xie, Y.J.; Jun, Z.H.A.N.G. 2008: Analysis of Corona Discharge Interference on Antennas on Composite Airplanes. IEEE Transactions on Electromagnetic Compatibility 50(4): 822-827

Abdelsalam, M.; Mufti, A. 1998: Analysis of corona losses on monopolar dc transmission lines. Electric Power Systems Research 44(2): 145-154

Krein, P.T. 1995: Analysis of corona motors and micromotors by means of effective gap conductivity. IEEE Transactions on Industry Applications 31(4): 752-760

Tiebing, L.U.; Gaolin, X.I.O.N.G.; Xiang, C.U.I.; Hong, R.A.O.; Qi, W.A.N.G. 2011: Analysis of Corona Onset Electric Field Considering the Effect of Space Charges. The Biennal IEEE Conference on Electromagnetic Field Computation 47(5): 1390-1393

Withbroe, G.L.; Kohl, J.L.; Weiser, H. 1986: Analysis of coronal H I lyman-alpha measurements in a polar region of the Sun observed in 1979. The Astrophysical Journal 307(1): 381-388

Howell, T.D. 1984: Analysis of correctable errors in the IBM 3380 disk file. IBM Journal of Research and Development 28(2): 206-211

Lin, X.; Breslow, N.E. 1996: Analysis of correlated binomial data in logistic-normal models. Journal of Statistical Computation and Simulation 55(1-2): 133-146

Ueki, T.; Hoogenboom, J.E.; Kloosterman, J.L. 2001: Analysis of correlated coupling of Monte Carlo forward and adjoint histories. Nuclear Science and Engineering 137(2): 117-145

Wenhu, L.I.U.; Padovani, A.; Larcher, L.; Raghavan, N.; Kin Leong, P.E.Y. 2014: Analysis of Correlated Gate and Drain Random Telegraph Noise in Post-Soft Breakdown TiN/HfLaO/SiOx nMOSFETs. IEEE Electron Device Letters 35(2): 157-159

Scarminio, I.; Kubista, M. 1993: Analysis of correlated spectral data. Analytical Chemistry 65(4): 409-416

Novak, I.; Krupa, I.; Chodak, I. 2003: Analysis of correlation between percolation concentration and elongation at break in filled electroconductive epoxy-based adhesives. European Polymer Journal 39(3): 585-592

Maitre, P.; Ohanessian, G. 1992: Analysis of correlation consistent wavefunctions : H3X-H bond energies (X=C, Si and Ge). Chemical Physics 168(2-3): 237-247

Lu, L.E.N.G.; Beng Jin Teoh, A.; Ming, L.I.; Muhammad Khurram, K.H.A.N. 2014: Analysis of correlation of 2DPalmHash Code and orientation range suitable for transposition. Neurocomputing (Amsterdam) 131: 377-387

Xiaodong, C.H.E.; Suhl, H. 1991: Analysis of correlation of magnetization and noise after ac erasing. Journal of Applied Physics 69(4): 2440-2443

Gangadhara Reddy, K.; Jha, A.K.; Ramesh Narayanan, P.; Arumugham, S. 2000: Analysis of corroded austenitic stainless steel welds. Praktische Metallographie 37(11): 600-607

Fujita, M.; Yokoyama, S.I.; Matsumoto, S. 1997: Analysis of corrosion characteristics of bright Ni-Cr electroplated steel panels subjected to the CASS test. Hyomen Gijutsu 48(2): 201-205

Hudak, S.J.; Burnside, O.H.; Chan, K.S. 1985: Analysis of corrosion fatigue crack growth in welded tubular joints. Journal of Energy Resources Technology 107(2): 212-219

Fukuda, Y.; Tsuchiya, Y.; Terasaka, M.; Nakaoka, K.; Hara, T. 1986: Analysis of corrosion layers on electrodeposited Zn-Ni (13wt%) alloys using AES, SAM, XPS, SEM and XRD - Analyse der Korrosionsniederschlaege auf elektroplattierten Zink-Nickel-Legierungsschichten unter Anwendung von Auger-Spektroskopie, Raster-Augerspektrometrie, Roentgen-Photoelektronenspektroskopie, Rasterelektronenmikroskopie sowie Roentgenbeugungsuntersuchungen. Tetsu-To-Hagane 72(11): 1782-1789

Wada, T.; Higuchi, H.; Ajiki, T. 1986: Analysis of corrosion on aluminium double-layer metallization - Analyse de la corrosion sur la métallisation à double couche de l'aluminium. Journal of the Electrochemical Society 133(2): 362-366

Yamaawa, K.; Inoue, H. 1990: Analysis of corrosion potential fluctuation fro stress corrosion cracking. Corros. Sci 31: 503-508

Nakamura, N.; Sobue, K.; Imai, H. 2006: Analysis of corrosion process of the steel for gas pipeline with in-situ Raman spectroscopy. Hyomen Gijutsu 57(11): 793-798

Bernard, M.C.; Duval, S.; Joiret, S.; Keddam, M.; Ropital, F.; Takenouti, H. 2002: Analysis of corrosion products beneath an epoxy-amine varnish film. Progress in Organic Coatings 45(4): 399-404

Lenglet, M.; Lopitaux, J.; Leygraf, C.; Odnevall, I.; Carballeira, M.; Noualhaguet, J.C.; Guinement, J.; Gautier, J.; Boissel, J. 1995: Analysis of corrosion products formed on copper in Cl2/H2S/NO2 exposure. Journal of the Electrochemical Society 142(11): 3690-3696

Qing, L.I.U.; Kin Seng, C.H.I.A.N.G.; Rastogi, V. 2003: Analysis of corrugated long-period gratings in slab waveguides and their polarization dependence. Journal of Lightwave Technology 21(12): 3399-3405

Eliseev, P.G.; Nabiev, R.F.; Onishchenko, A.I. 1995: Analysis of corrugated quantum well structures for laser applications. Iee Proc., Optoelectron 142(1): 2-4

Lukin, E.S.; Makarov, N.A.; Mosin, Y.M.; Oleinik, E.A. 1999: Analysis of corundum ceramics strength (a review). Glass and Ceramics 56(5-6): 154-157

Ma, Y.U.Q.I.A.N.; Cheng, L.I.N.G.X.I.A.N.G.; Li, T.I.B.E.I.; Sun, X.U.E.J.U.N.; Wu, M.E.I.; Song, L.I.M.I.N.G.; Ma, L.I.N. 1993: Analysis of COS-B and HEAO-B satellite data of the pulsar Geminga. Chinese Astronomy and Astrophysics 17(1): 33-36

Peltzer, G.; Hudnut, K.W.; Feigl, K.L. 1994: Analysis of coseismic surface displacement gradients using radar interferometry : new insights in to the Landers earthquake. Journal of Geophysical Research 99(B 11): 21971-21981

Yoshida, S.; Namba, R.; Takamatsu, T.; Matsuoka, M. 1995: Analysis of cosmetic ingredients by continuous-flow fast atom bombardment liquid chromatography-mass spectrometry. Journal of the Society of Cosmetic Chemists 46(6): 329-342

Clarke, D.; Martinez, A.; Cox, R.S. 1983: Analysis of cosmetic results and complications in patients with stage I and II breast cancer treated by biopsy and irradiation - Analyse des résultats esthétiques et des complications chez les femmes ayant un cancer du sein de stade I ou II traité par biopsie et irradiation. International Journal of Radiation Oncology, Biology, Physics 9(12): 1807-1813

Ove, R. 1990: Analysis of cosmological gravitational waver residue. Classical and Quantum Gravity 7(12): 2225-2236

Shimoyama, Y.; Tokumoto, H.; Matsuno, T.; Iwai, Y. 2010: Analysis of cosolvent effect on supercritical carbon dioxide extraction for α-pinene and 1,8-cineole. Chemical Engineering Research and Design 88(12): 1563-1568

Zhang, H.W.; Wang, H.; Chen, B.S.; Xie, Z.Q. 2008: Analysis of Cosserat materials with Voronoi cell finite element method and parametric variational principle. Computer Methods in Applied Mechanics and Engineering 197(6-8): 741-755

Dalmeida, J.R.M. 2001: Analysis of cost and flexural strength performance of natural fiber-polyester composites. Polymer-Plastics Technology and Engineering (Softcover Ed) 40(2): 205-215

Keqin, L.I. 2014: Analysis of cost and quality of service of time-based dynamic mobility management in wireless networks. Wireless Networks 20(2): 261-288

Winiarski, D.W.; Somasundaram, S. 1997: Analysis of cost-effective pipe insulation requirements. Energy Engineering 94(3): 32-52

Thakuriah, P. 2011: Analysis of Cost-Effectiveness of Employment Transportation Services. Transportation Research Record (2217): 55-62

Ehlers, L.; Overvad, K.; Srensen, J.; Christensen, S.; Bech, M.; Kjlby, M. 2009: Analysis of cost effectiveness of screening Danish men aged 65 for abdominal aortic aneurysm. Bmj. British Medical Journal (International Ed.) 338(7710): 1542-1544

Ohunakin, S.O.; Ojolo, S.J.; Ogunsina, S.B.; Dinrifo, R.R. 2012: Analysis of cost estimation and wind energy evaluation using wind energy conversion systems (WECS) for electricity generation in six selected high altitude locations in Nigeria. Energy Policy 48: 594-600

Wang, S.T.; Li, M.H. 2012: Analysis of cost models and quantification models of customisation degree after VMI strategy implemented in different industries. International Journal of Manufacturing Technology and Management 26(1-4): 161-175

Nahman, J.; Peric, D. 1998: Analysis of cost of urban medium voltage distribution networks. Electrical Power and Energy Systems 20(1): 7-16

Vogel, C.R.; Wade, J.G. 1995: Analysis of costate discretizations in parameter estimation for linear evolution equations. Siam Journal on Control and Optimization 33(1): 227-254

Warszawski, A. 2003: Analysis of costs and benefits of tall buildings. Journal of Construction Engineering and Management 129(4): 421-430

Chaturabong, P.; Kanitpong, K.; Jiwattanakulpaisarn, P. 2011: Analysis of Costs of Motorcycle Accidents in Thailand by Willingness-to-Pay Method. Transportation Research Record (2239): 56-63

Blanco, M.; Coello, J.; Iturriaga, H.; Maspoch, S.; Bertran, E. 1994: Analysis of cotton-polyester yarns by near-infrared reflectance spectroscopy. Analyst (London 1877. Print) 119(8): 1779-1785

Lee, J.S.; Hsu, J.L.; Chou, K.L.; Chang, S.L.; Liu, R.S. 2000: Analysis of count-rate variations on image contrast using E.CAM+ camera with coincidence capability. Yixue Gongcheng. Applications, Basis, Communications 12(1): 18-23

Peterson, G.P.; Ma, H.B. 1996: Analysis of countercurrent liquid-vapor interactions and the effect on the liquid friction factor. Experimental Thermal and Fluid Science 12(1): 13-24

Li, Y.B. 2014: Analysis of counterfactual quantum key distribution using error-correcting theory. Quantum Information Processing 13(10): 2325-2342

Bovalini, R.; Dauria, F.; De Varti, A.; Maugeri, P.; Mazzini, M. 1992: Analysis of counterpart tests performed in boiling water reactor experimental simulators. Nuclear Technology 97(1): 113-130

Rothery, P.; Wanless, S.; Harris, M.P. 1988: Analysis of counts from monitoring guillemots in Britain and Ireland. Journal of Animal Ecology 57(1): 1-19

Gupta, R.S.; Sharma, L.G. 1988: Analysis of couple stress lubricant in hydrostatic thrust bearing. Wear 125(3): 257-269

Van de Capelle, J.P.; Fache, N.; Vankwikelberge, P.; Baets, R.; Lagasse, P.E. 1987: Analysis of coupled active waveguides. Journal of Lightwave Technology 5(11): 1596-1599

Janiczak, B.; Kitlinski, M. 1983: Analysis of coupled asymmetric microstrip lines on a ferrite substrate. Electronics Letters 19(19): 779-781

Li, Z.; Lv, G.; Deng, S.; Huang, Y.; Yang, J.; Deng, G. 2007: Analysis of coupled-cavity slow-wave structures for space TWT. Proc. Spie Int. Soc. Opt. Eng: 67951K.1-67951K.5

Mahapatra, S.K.; Nanda, P.; Sarkar, A. 2005: Analysis of coupled conduction and radiation heat transfer in presence of participating medium- using a hybrid method. Heat and Mass Transfer 41(10): 890-898

Jagageswara Reddy, C.; Deshpande, M.D. 1988: Analysis of coupled cylindrical striplines filled with multilayered dielectrics. IEEE Transactions on Microwave Theory and Techniques 36(9): 1301-1310

Liu, Z.; Dadyburjor, D.B. 1997: Analysis of coupled deactivation effects : Interaction of sodium and coke in cracking over zeolites. Catalysis Today 37(3): 249-253

Kurgan, E. 2002: Analysis of coupled electric and thermal field problems by boundary-element method. Ieee Trans. Magn 38(2): 949-952

Sui, P.C.; Djilali, N. 2006: Analysis of coupled electron and mass transport in the gas diffusion layer of a PEM fuel cell. Journal of Power Sources 161(1): 294-300

Chai, J.; Li, L.; Sha, C. 2001: Analysis of coupled field for linear MHD propulsor. International Journal of Power and Energy Systems 21(2): 112-116

Sykora, J.; Vorel, J.; Krejci, T.; Sejnoha, M.; Sejnoha, J. 2009: Analysis of coupled heat and moisture transfer in masonry structures. Materials and Structures 42(8): 1153-1167

Thomas, H.R.; He, Y. 1995: Analysis of coupled heat, moisture and air transfer in a deformable unsaturated soil. Geotechnique 45(4): 677-689

Pennock, S.R.; Boskovic, D.M.; Rossi, T. 1992: Analysis of coupled inset dielectric guides under LSE and LSM polarization. IEEE Transactions on Microwave Theory and Techniques 40(5): 916-924

Kwan, P.; Vittoria, C. 1993: Analysis of coupled magneto-dielectric image guides. Ieee Trans. Magn 29(6): 3425-3427

Schittenhelm, M.; Zohm, H.; A U, T. 1997: Analysis of coupled MHD modes with Mirnov probes in asdex upgrade. Nuclear Fusion 37(9): 1255-1270

Young, B.; Itoh, T. 1988: Analysis of coupled microslabTM lines. IEEE Transactions on Microwave Theory and Techniques 36(3): 616-619

Ozkaynak, H.; Frey, H.C.; Burke, J.; Pinder, R.W. 2009: Analysis of coupled model uncertainties in source-to-dose modeling of human exposures to ambient air pollution: A PM2.5 case study. Atmospheric Environment (1994) 43(9): 1641-1649

Alhazmy, M.M. 2006: Analysis of coupled natural convection-conduction effects on the heat transport through hollow building blocks. Energy and Buildings 38(5): 515-521

Khalajamirhosseini, M. 2006: Analysis of coupled nonuniform transmission lines using Taylor's series expansion. IEEE Transactions on Electromagnetic Compatibility 48(3): 594-600

Uehiro, M.; Rao, Y.F.; Fukuda, K. 1999: Analysis of coupled nuclear/thermal instabilities of two-phase flows in parallel boiling channels. J. Heat Transf 121(4): 916-923

Chen, Z.H.A.O.; Aditya, S.; Chua, C. 2013: Analysis of Coupled Planar Helices with Straight-Edge Connections for Application in Millimeter-Wave TWTs. Ieee Trans. Electron Devices 60(3): 1244-1250

Kumar, R.S. 2013: Analysis of coupled ply damage and delamination failure processes in ceramic matrix composites. Acta Materialia 61(10): 3535-3548

Carries, B.; Djilali, N. 2006: Analysis of coupled proton and water transport in a PEM fuel cell using the binary friction membrane model. Electrochimica Acta 52(3): 1038-1052

Kang, W.; Cheon, S.S. 2012: Analysis of coupled residual stresses in stamping and welding processes by finite element methods. Proceedings of the Institution of Mechanical Engineers. Part B. Journal of Engineering Manufacture 226(5): 884-897

Chai, J.U.N.R.U.I. 2002: Analysis of coupled seepage and temperature fields in concrete dam. Communications in Numerical Methods in Engineering 18(6): 399-409

Cheldavi, A.; Kamarei, M.; Naeini, S.S. 2000: Analysis of coupled transmission lines with power-law characteristic impedance. IEEE Transactions on Electromagnetic Compatibility 42(3): 308-312

Kim, D.S.; Kim, W.S.; Kuznetsov, A.V. 2002: Analysis of coupled turbulent flow and solidification in the wedge-shaped pool with different nozzles during twin-roll strip casting. Numerical Heat Transfer. Part A, Applications 41(1): 1-17

Sueoka, A.; Ayabe, T.; Iizuka, Y. 1994: Analysis of coupled vibration between railway vehicle wheels and a rail in both vertical and horizontal directions using an approximate model with an infinite number of vehicles. Jsme International Journal. Series C, Dynamics, Control, Robotics, Design and Manufacturing 37(4): 651-660

Zheng, S.; Simon, G.P.; Binh, L.N. 1995: Analysis of couplers composed of a fibre half-block with a slab overlay : effects of curvature of the fibre and asymmetry of the slab waveguide. Iee Proceedings. Optoelectronics 142(4): 176-182

Parker, E.A.; Philips, B.; Langley, R.J. 1995: Analysis of coupling between a curved FSS and an enclosed planar dipole array. IEEE Microwave and Guided Wave Letters 5(10): 338-340

Tomioka, K. 1993: Analysis of coupling between optic lobe circadian pacemakers in the cricket Gryllus bimaculatus. Journal of Comparative Physiology. A, Sensory, Neural, and Behavioral Physiology 172(4): 401-408

Xu, S.J.; Peng, S.T.; Schwering, F.K. 1987: Analysis of coupling between two parallel dielectric waveguides. International Journal of Infrared and Millimeter Waves 8(9): 1001-1013

Yoo, H.J.; Hayes, J.R. 1990: Analysis of coupling coefficient between two vertical cavity surface emitting lasers for two-dimensional phase-locked array. Electronics Letters 26(13): 896-897

Ma, C.S.; Han, C.H.; Liu, S.Y. 1997: Analysis of coupling effect on valence band structures of strained multiple quantum wells. Optical and Quantum Electronics 29(6): 697-709

Hui, D.I.N.G.; Yi, Z.H.A.N.G.; Gole, A.M.; Woodford, D.A.; Min Xiao, H.A.N.; Xiang Ning, X.I.A.O. 2010: Analysis of Coupling Effects on Overhead VSC-HVDC Transmission Lines From AC Lines With Shared Right of Way. IEEE Transactions on Power Delivery 25(4): 2976-2986

Du, J.K.; Hwang, S.M.; Ahn, J.W.; Yook, J.G. 2013: Analysis of Coupling Effects to PCBs Inside Waveguide Using the Modified BLT Equation and Full-Wave Analysis. IEEE Transactions on Microwave Theory and Techniques 61(10): 3514-3523

Dages, C.; Paniconi, C.; Sulis, M. 2012: Analysis of coupling errors in a physically-based integrated surface water―groundwater model. Advances in Water Resources 49: 86-96

Paul, D.L.; Habibi, M.; Castrillo, J.; Gelin, P.; Toutain, S. 1992: Analysis of coupling in image guide technology. IEEE Transactions on Microwave Theory and Techniques 40(5): 1025-1028

Zola, D.; Gomory, F.; Polichetti, M.; Strycek, F.; Souc, J.; Kovac, P.; Pace, S. 2005: Analysis of coupling losses in multifilamentary untwisted BSCCO/Ag tapes through a.c. susceptibility measurements. Ieee Trans. Appl. Supercond 15(2): 2903-2906

Konishi, Y.; Kumanoya, M.; Yamasaki, H.; Dosaka, K.; Yoshihara, T. 1989: Analysis of coupling noise between adjacent bit line in megabit DRAM's. IEEE Journal of Solid-State Circuits 24(1): 35-42

Wakabayashi, R.; Kawakami, H.; Sato, G.; Amano, T.; Suzuki, Y. 1998: Analysis of course errors on CVOR antennas (including effects of mutual coupling between elements). IEEE Transactions on Vehicular Technology 47(2): 392-405

Nordholm, S. 1987: Analysis of covalent bonding by nonergodic Thomas-Fermi theory. The Journal of Chemical Physics 86(1): 363-369

Curtis, A.R. 1986: Analysis of covariance after nonlinear least-squares fitting. Ima Journal of Numerical Analysis 6(4): 453-461

Raubenheimer, D.; Simpson, S.J. 1992: Analysis of covariance : an alternative to nutritional indices. Entomologia Experimentalis et Applicata 62(3): 221-231

Takane, Y. 1989: Analysis of covariance structures and probabilistic binary choice data. Advances in Psychology 60: 139-160

Shapiro, A.; Browne, M.W. 1987: Analysis of covariance structures under elliptical distributions. Journal of the American Statistical Association 82(400): 1092-1097

Senoglu, B.; Avcioglu, M.D. 2009: Analysis of Covariance with Non-normal Errors. International Statistical Review 77(3): 366-377

Jennings, E. 1988: Analysis of Covariance with Nonparallel Regression Lines. The Journal of Experimental Education 56(3): 129-134

Lo, M.H.; Wei Wc, J. 1997: Analysis of (Cr,Mo) oxycarbide films grown on stainless steel via metalloorganic chemical vapor deposition. Journal of the American Ceramic Society 80(4): 886-892

Nakasa, K.; Nakatsuka, J. 1991: Analysis of crack branching morphology in a disk of brittle material under axisymmetric tension by using branching dimension. Zairyo 40(452): 613-618

Nakasa, K.; Nakatsuka, J.I. 1994: Analysis of crack branching morphology in a disk of brittle material under axisymmetric tension by using branching dimension. Engineering Fracture Mechanics 47(3): 403-415

Kwon, Y.W. 1992: Analysis of crack closure in unidirectional composite plates subject to bending loads. Engineering Fracture Mechanics 42(5): 825-831

Seok Soon, L.E.E. 1996: Analysis of crack closure problem using the dual boundary element method. International Journal of Fracture 77(4): 323-336

Byungnam, K.I.M.; Kishi, T. 1994: Analysis of crack deflection fracture behavior of Al2O3 polycrystals. Nippon Kinzoku Gakkaishi (1952) 58(11): 1256-1262

Pompidou, S.; Lamon, J. 2007: Analysis of crack deviation in ceramic matrix composites and multilayers based on the Cook and Gordon mechanism. Composites Science and Technology 67(10): 2052-2060

Loyola de Oliveira, M.A.; Michot, G. 1994: Analysis of crack-dislocation interaction : crack closure, crack opening. Mater. Sci. Eng. A Struct. Mater. Prop. Microstruct. Proces 176(1-2): 139-145

Beuth, J.L.; Herakovich, C.T. 1989: Analysis of crack extension in anisotropic materials based on local normal stress. Theoretical and Applied Fracture Mechanics 11(1): 27-46

Wang, C.; Libardi, W.; Baldo, J.B. 1998: Analysis of crack extension paths and toughening in a two phase brittle particulate composite by the boundary element method. International Journal of Fracture 94(2): 177-188

Bhattacharya, A. 1997: Analysis of crack growth rate based on rotation at the crack tip plastic zone. International Journal of Fracture 83(2): 159-165

Sun, B.N.; Hou, H.S.; Hsiao, C.C. 1988: Analysis of crack-induced-craze in polymers. Engineering Fracture Mechanics 30(5): 595-607

Fellows, L.J.; Nowell, D.; Hills, D.A. 1997: Analysis of crack initiation and propagation in fretting fatigue : The effective initial flaw size methodology. Fatigue and Fracture of Engineering Materials and Structures 20(1): 61-70

Yamasaki, S.; Takahashi, T.; Kobayashi, T. 1997: Analysis of crack initiation and propagation process in delayed fracture by FRASTA (Fracture-surface topography analysis) method. Tetsu-To-Hagane 83(8): 526-531

Wang, X.; Modarres, M.; Hoffman, P. 2009: Analysis of crack interactions at adjacent holes and onset of multi-site fatigue damage in aging airframes. International Journal of Fracture 156(2): 155-163

Yokozeki, T. 2011: Analysis of crack kinking in foam core sandwich beams. Composites. Part A, Applied Science and Manufacturing 42(10): 1493-1499

Dutta, B.K.; Maiti, S.K.; Kakodkar, A. 1991: Analysis of crack-microcrack interactions and doubly kinked cracks using multiple singular points elements. Engineering Fracture Mechanics 38(2-3): 215-223

Rubinstein, A.A.; Yaliang, T.A.N.G. 2008: Analysis of crack nets development in thermal barrier coatings. International Journal of Fracture 151(1): 57-79

Crostack, H.A.; Nellesen, J.; Fischer, G.; Hofmann, M.; Rademacher, H.G.; Tilimann, W. 2012: Analysis of Crack Patterns in Drying Corn Starch by in-situ Radiography and X-ray Computer Tomography. Experimental Mechanics 52(7): 917-932

Shin, H.; Park, E.S. 2009: Analysis of Crack Phenomenon for Injection-Molded Screw Using Moldflow Simulation. Journal of Applied Polymer Science 113(4): 2702-2708

Shioya, T. 1994: Analysis of crack propagation in brittle material. Jsme International Journal. Series A, Mechanics and Material Engineering 37(1): 1-6

Li, S.H.I.; Haiyan, L.I.; Zhenmin, Z.O.U.; Fok, A.S.L.; Marsden, B.J.; Hodgkins, A.; Mummery, P.M.; Marrow, J. 2008: Analysis of crack propagation in nuclear graphite using three-point bending of sandwiched specimens. Journal of Nuclear Materials 372(2-3): 141-151

Ghosn, L.J. 1988: Analysis of crack propagation in roller bearings using the boundary integral equation method: a mixed-mode loading problem. Journal of Tribology 110(3): 408-413

Dexter, R.J.; Pilarski, P.J.; Mahmoud, H.N. 2003: Analysis of crack propagation in welded stiffened panels. International Conference on Fatigue Damage of Structural Materials 25(9-11): 1169-1174

Pirondi, A.; Collini, L. 2009: Analysis of crack propagation resistance of Al-Al2O3 particulate-reinforced composite friction stir welded butt joints. International Journal of Fatigue 31(1): 111-121

Stoychev, S.; Kujawski, D. 2005: Analysis of crack propagation using ΔK and Kmax. International Conference on Fatigue Damage in Structural Materials 27(10-12): 1425-1431

Ito, T.; Hayashi, K. 1993: Analysis of crack reopening behavior for hydrofac stress measurement. Int. J. Rock Mech. Min. Sci. Geomech. Abstr 30(7): 1235-1240

Costabel, M.; Dauge, M.; Nazarov, S.A.; Sokolowski, J. 2006: Analysis of crack singularities in an aging elastic material. Modelisation Mathematique et Analyse Numerique 40(3): 553-595

Xu, J.; He, S.; Jiang, X.; Wu, T.; Wang, Q. 2013: Analysis of Crack Susceptibility of Regular Carbon Steel Slabs Using Volume-Based Shrinkage Index. Isij International 53(10): 1812-1817

Okazaki, M. 1991: Analysis of crack tip sliding displacement in anisotropic elastic media and its application to stage I fatigue crack growth. Metallurgical Transactions. A, Physical Metallurgy and Materials Science 22(2): 479-487

Sun, C.T.; Klug, J.; Arendt, C. 1996: Analysis of cracked aluminum plates repaired with bonded composite patches. Aiaa : American Institute of Aeronautics and Astronautics/Asme/Asce/Ahs/Asc. Structures, Structural Dynamics, and Materials Conference 34(2): 369-374

Ahn, J.S.; Basu, P.K.; Woo, K.S. 2010: Analysis of cracked aluminum plates with one-sided patch repair using p-convergent layered model. Finite Elements in Analysis and Design 46(5): 438-448

Chen, H.C.; Kudva, J.N. 1993: Analysis of cracked anisotropic plates using the hybrid finite element method. International Journal of Fracture 63(2): 215-228

Assan, A.E.; Aliabadi, M.H. 1993: Analysis of cracked cylindrical shells by a strain-based finite element. Advances in Engineering Software (1992) 17(1): 39-47

Bernstein, H.L.; Allen, J.M. 1992: Analysis of cracked gas turbine blades. J. Eng. Gas Turbine Power 114(2): 293-301

Tan, P.W.; Bigelow, C.A. 1988: Analysis of cracked laminates with holes using the boundary force method. Aiaa Journal 26(9): 1094-1099

Solis, M.; Sanz, J.A.; Ariza, M.P.; Dominguez, J. 2009: Analysis of cracked piezoelectric solids by a mixed three-dimensional BE approach. Engineering Analysis with Boundary Elements 33(3): 271-282

Jiannquo, T.A.R.N.; Kamlun, S.H.E.K. 1991: Analysis of cracked plates with a bonded patch. Engineering Fracture Mechanics 40(6): 1055-1065

Dong, C.Y.; Yang, X.; Pan, E. 2011: Analysis of cracked transversely isotropic and inhomogeneous solids by a special BIE formulation. Engineering Analysis with Boundary Elements 35(2): 200-206

Lie, S.T.; Li, G.; Cen, Z. 2000: Analysis of cracked tubular joints using coupled finite and boundary element methods. Engineering Structures 22(3): 272-283

Gao, S.; Nakasa, K.; Kato, M. 2000: Analysis of cracking and delamination processes in sprayed cermet and ceramic coatings under biaxial tension. Zairyo 49(3): 296-303

Kato, M.; Zhang, D.; Nakasa, K. 1999: Analysis of cracking and delamination processes of WC-Co coating under bending load. Zairyo 48(6): 629-635

Baena, M.; Torres, L.; Turon, A.; Mias, C. 2013: Analysis of cracking behaviour and tension stiffening in FRP reinforced concrete tensile elements. Composites. Part B, Engineering 45(1): 1360-1367

Chan, C.M.; Mickleborough, N.C.; Ning, F. 2000: Analysis of cracking effects on tall reinforced concrete buildings - Calcul de l'influence des fissurations sur les bâtiments en béton armé de grande hauteur. Journal of Structural Engineering (New York) 126(9): 995-1003

Silberschmidt, V.G.; Silberschmidt, V.V. 2000: Analysis of cracking in rock salt. Rock Mechanics and Rock Engineering 33(1): 53-70

Ligot, J.; Benayoun, S.; Hantzpergue, J.J. 2000: Analysis of cracking induced by scratching of tungsten coatings on polyimide substrate. Wear 243(1-2): 85-91

Jasienko, J.; Stawiski, B. 2001: Analysis of cracking plane geometry in old sandstone columns - Analyse de la géométrie des plans de fissurations de poteaux en grès anciens. Materials and Structures 34(238): 248-252

Benedetto, G.; Dalmasso, F.; Guarene, M.; Righini, G.; Spagnolo, R. 1985: Analysis of crackling sounds in some pulmonary diseases. Innovation et Technologie en Biologie et Medecine 6(2): 130-138

Destrebecq, J.F.; Toussaint, E.; Ferrier, E. 2011: Analysis of Cracks and Deformations in a Full Scale Reinforced Concrete Beam Using a Digital Image Correlation Technique. Experimental Mechanics 51(6): 879-890

Heinimann, M.B.; Doerfler, M.T.; Grandt, A.F. 1996: Analysis of cracks at deep notches. Engineering Fracture Mechanics 55(4): 605-616

Cheong, S.K.; Hong, C.S. 1988: Analysis of cracks emanating from a circular hole in an orthotropic plate under mixed mode deformation. Engineering Fracture Mechanics 31(2): 237-248

Cheong, S.K.; Hon, C.S. 1989: Analysis of cracks emanating from a circular hole in [0n/90m]s laminates under various boundary conditions. Engineering Fracture Mechanics 32(6): 923-934

Park, J.H.; Ogiso, T.; Atluri, S.N. 1992: Analysis of cracks in aging aircrafts structures - with an without composite-patch repairs. Computational Mechanics 10(3-4): 169-201

Wang, C.H. 1997: Analysis of cracks in constrained layers. International Journal of Fracture 83(1): 1-17

Lazzeri, L. 1985: Analysis of cracks in nuclear piping: a criterion to eliminate the guillotine type of break - Analyse des fissures dans la tuyauterie nucléaire: un critère pour éliminer les cassures type «guillotine». International Journal of Pressure Vessels and Piping 21(4): 243-259

Miller, G.R. 1989: Analysis of cracks near interfaces between dissimilar anisotropic materials. International Journal of Engineering Science 27(6): 667-678