EurekaMag PDF full texts Chapter 74,740

Zhang, H.; Berglund, L.A. 1993: Deformation and fracture of glass bead/CTBN-rubber/epoxy composites. Polymer Engineering and Science 33(2): 100-107

Ericson, M.; Berglund, L. 1992: Deformation and fracture of glass-mat-reinforced polypropylene. Composites Science and Technology 43(3): 269-281

Kondryakov, E.A.; Lenzion, S.V.; Kharchenko, V.V. 2009: Deformation and Fracture of High-Temperature Steels at different Temperatures and Loading Rates. Strength Mater 41(1): 20-24

Yoo, M.H.; Sass, S.L.; Fu, C.L.; Mills, M.J.; Dimiduk, D.M.; George, E.P. 1993: Deformation and fracture of intermetallics. Acta Metallurgica et Materialia 41(4): 987-1002

George, E.P.; Mckamey, C.G.; Ohriner, E.K.; Lee, E.H. 2001: Deformation and fracture of iridium: microalloying effects. Icsma-12: International Conference on the Strength of Materials 319/21: 466-470

Heard, P.J.; Wootton, M.R.; Moskovic, R.; Flewitt, P.E.J. 2011: Deformation and fracture of irradiated polygranular pile grade A reactor core graphite. Journal of Nuclear Materials 418(1-3): 223-232

Vorobev, E.V.; Strizhalo, V.A. 2003: Deformation and fracture of 03Kh20N16AG6 steel under nonuniform stress at temperatures down to 4.2 K. Strength of Materials 35(2): 136-139

Wu, Z.L.; Pope, D.P.; Vitek, V. 1990: Deformation and fracture of L12 (Al,Fe)3Ti. Scripta Metallurgica 24(11): 2187-2190

Khanna, V.; Ruokolainen, J.; Kramer, E.J.; Hahn, S.F. 2006: Deformation and fracture of lamellar and cylindrical block copolymers with unentangled glassy matrices : Effect of chain architecture and microdomain orientation. Macromolecules 39(13): 4480-4492

Chunhui, W.A.N.G.; Liangghi, Z.H.A.N.G.; Yiuwing, M.A.I. 1994: Deformation and fracture of Macadamia nuts. I: Deformation analysis of nut-in-shell. International Journal of Fracture 69(1): 51-65

Chunhui, W.A.N.G.; Yiuwing, M.A.I. 1994: Deformation and fracture of Macadamia nuts. II: Microstructure and fracture mechanics analysis of nutshell. International Journal of Fracture 69(1): 67-85

Rees, D.W.A. 1998: Deformation and fracture of metal matrix particulate composites under combined loadings. International Conference on Flow Processes in Composite Materials 29(1-2): 171-182

Song, Z.H.U.; Yong, Z.H.A.N.G.; Yinxi, Z.H.A.N.G. 2003: Deformation and fracture of Mg(OH)2-filled polyolefin composites under tensile stress. Journal of Applied Polymer Science 89(12): 3248-3255

Wei, T.O.N.G.; Hong, T.A.O.; Xiquan, J.I.A.N.G.; Nian, Z.H.A.N.G.; Marya, M.P.; Hector, L.G.; Gayden, X.Q. 2005: Deformation and fracture of miniature tensile bars with resistance-spot-weld microstructures. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science 36(10): 2651-2669

Liu, Y.; Kohnle, C.; Brunner, D.; Ruhle, M. 2003: Deformation and fracture of Nb/α-Al2O3 composites in compression and bending studied by optical methods. Zeitschrift für Metallkunde 94(6): 694-704

Blankenship, C.P.; Larsen, M.; Sutlliff, J.A. 1995: Deformation and fracture of NiAl single crystals tested in torsion. Acta Metallurgica et Materialia 43(4): 1549-1558

Zhou, Q.J.; He, J.Y.; Sun, D.B.; Chu, W.Y.; Qiao, L.J. 2006: Deformation and fracture of nickel phosphorus coatings. Scripta Materialia 54(4): 603-608

Chai, H. 1995: Deformation and fracture of particulate epoxy in adhesive bonds. Acta Metallurgica et Materialia 43(1): 163-172

Sahraoui, S.; Lataillade, J.L. 1994: Deformation and fracture of PMMA at high rates of loading. Journal of Applied Polymer Science 51(9): 1527-1532

Zumelzu, E.; Rull, F.; Boettcher, A.A. 2006: Deformation and fracture of polymer coated metal sheets : characterisation and degradation. Surface Engineering 22(6): 432-438

Calcagno, B.O.; Hart, K.R.; Springmann, J.C.; Antoun, G.G.; Crone, W.C. 2012: Deformation and fracture of polymer/metal composites subjected to cold rolling. Composites Science and Technology 72(12): 1344-1351

Shengwei, D.E.N.G.; Xuezhe, Z.H.A.O.; Yongmin, H.U.A.N.G.; Xia, H.A.N.; Honglai, L.I.U.; Ying, H.U. 2011: Deformation and fracture of polystyrene/polypropylene blends: A simulation study. Polymer (Guildford) 52(24): 5681-5694

Wang, S.S.; Dasgupta, A. 1986: Deformation and fracture of random short-fiber SMC composite under multiaxial loading. Journal of Composites Technology and Research 8(4): 129-137

Takeda, J. 1993: Deformation and fracture of reinforced concrate structures subjected to gas explosion. Response analysis of structures subjected to blast shock or impact. I. Kogyo Kayaku 54(3): 105-114

Momber, A.W. 2004: Deformation and fracture of rocks due to high-speed liquid impingement. International Journal of Fracture 130(3): 683-704

Momber, A.W. 2004: Deformation and fracture of rocks loaded with spherical indenters. International Journal of Fracture 125(3-4): 263-279

Taniguchi, T.; Ito, S. 2008: Deformation and fracture of soda-lime-silica glass under tension by molecular dynamics simulation : Fracture and related phenomena of glasses. Nippon Seramikkusu Kyokai Gakujutsu Ronbunshi 116(8): 885-889

Balokhonov, R.R.; Stefanov, Y.P.; Makarov, P.V.; Smolin, I.Y. 2000: Deformation and fracture of surface-hardened materials at meso- and macroscale levels. Theoretical and Applied Fracture Mechanics 33(1): 9-15

Ebrahimi, F.; Yanevich, J.; Deluca, D.P. 2000: Deformation and fracture of the PWA 1472 superalloy single crystal. Acta Materialia 48(2): 469-479

Cairney, J.M.; Hoffman, M.J.; Munroe, P.R.; Martin, P.J.; Bendavid, A. 2005: Deformation and fracture of Ti-Si-N nanocomposite films. Thin Solid Films 479(1-2): 193-200

Nonaka, K.; Kawabata, T.; Nakajima, H.; Tanosaki, K.; Echigoya, J.I. 2001: Deformation and fracture of TiAl alloys with a coarsely spaced lamellar structure on compression test at room temperature. Nippon Kinzoku Gakkaishi (1952) 65(11): 1029-1037

An, T.; Wang, L.L.; Tian, H.W.; Wen, M.; Zheng, W.T. 2011: Deformation and fracture of TiN coating on a Si(111) substrate during nanoindentation. Applied Surface Science 257(17): 7475-7480

Elleithy, R.H.; Hiltner, A.; Baer, E.; Fraser, I.M.; Orton, M.L. 1995: Deformation and fracture of urethane-methacrylate resins. Journal of Applied Polymer Science 55(10): 1395-1404

Zainetdinov, R.I.; Kiselev, S.N. 1995: Deformation and fracture of welded structures from the position of synergetics and theory of Markovian processes. Welding International 9(10): 822-824

Christianson, D.D.; Casiraghi, E.M.; Bagley, E.B. 1986: Deformation and fracture of wheat, corn and rice starch gels in lubricated and bonded uniaxial compression - Déformation et rupture des gels d'amidons de blé, de maïs et de riz soumis à une compression uniaxiale, en milieu lubrifié ou non. Carbohydrate Polymers 6(5): 335-348

Gogotsi, G.A.; Galenko, V.I.; Zavada, V.P.; Swain, M.V. 1995: Deformation and fracture of zirconia ceramics stabilized by CeO2. II: Crack resistance. Refractories (New York) 36(3-4): 78-81

Roebuck, B.; Almond, E.A. 1988: Deformation and fracture processes and the physical metallurgy of WC-Co hardmetals - Processus de déformation et de rupture et métallurgie physique de carbures frittés WC-Co. International Materials Reviews 33(2): 90-110

Byun, T.S.; Li, M.; Cockeram, B.V.; Snead, L.L. 2008: Deformation and fracture properties in neutron irradiated pure Mo and Mo alloys. Journal of Nuclear Materials 376(2): 240-246

Baero, G.; Dannhaeuser, G.; Atrens, A. 1986: Deformation and fracture properties of stress relieved zircaloy-4 in iodine, caesium, cadmium and a mixture of caesium/cadmium - Verformungs- und Brucheigenschaften von entspanntem Zircaloy-4 in Jod, Caesium, Cadmium und einer Mischung aus Caesium und Cadmium. Res Mechanica 17(2): 99-124

Dao, M.; Kad, B.K.; Asaro, R.J. 1996: Deformation and fracture under compressive loading in lamellar TiAl microstructures. Philosophical Magazine. A. Physics of Condensed Matter. Structure, Defects and Mechanical Properties 74(3): 569-591

Hiroe, T.; Fujiwara, K.; Hata, H.; Takahashi, H. 2008: Deformation and fragmentation behaviour of exploded metal cylinders and the effects of wall materials, configuration, explosive energy and initiated locations. Int. J. Impact Eng 35(12): 1578-1586

Xue, L.A.; Iwei, C.H.E.N. 1990: Deformation and grain growth of low-temperature-sintered high-purity alumina. Journal of the American Ceramic Society 73(11): 3518-3521

Weisenhorn, A.L.; Khorsandi, M.; Kasas, S.; Gotzos, V.; Butt, H.J. 1993: Deformation and height anomaly of soft surfaces studied with an AFM. Nanotechnology (Bristol. Print) 4(2): 106-113

Kilias, A.; Fasoulas, C.; Priniotakis, M.; Sfeikos, A.; Frisch, W. 1991: Deformation and HP/LT metamorphic conditions at the tectonic window of Kranea (W-Thessaly, Northern Greece) - Deformation und HP/LT-Metamorphosebedingungen im Bereich des Kranea-Fensters (W. Thessalie, Nord Griechenland). Igcp 291 Project Symposium Metamorphic Fluids and Mineral Deposits <1991, Zurich> 142(1): 87-96

Toritsyn, L.N. 1992: Deformation and hydraulic resistance of a regenerative heat exchanger poured checkerwork. Refractories (New York) 33(5-6): 334-343

Tjong, S.C.; Ke, Y.C. 1996: Deformation and impact toughening behaviour of compatibilised blends of polyamide 6 and copoly(ethylene/propylene/diene). Plastics Rubber and Composites Processing and Applications 25(7): 319-326

Umakoshi, Y.; Yamaguchi, M.; Yamane, T.; Hirano, T. 1988: Deformation and improvement of ductility of ther intermetallic compounds Al3V and Al3(V,Ti) - Déformation et augmentation de ductilité des composés intermétalliques Al3V et Al3 (V,Ti). Philosophical Magazine. A. Physics of Condensed Matter. Defects and Mechanical Properties 58(4): 651-666

Dorso, C.; Lopez, J.A. 1991: Deformation and interaction energies in statistical multifragmentation. Nuovo Cimento. a 104(1): 135-138

Park, C.; Dutta, I.; Peterson, K.A.; Vella, J. 2003: Deformation and interfacial sliding in back-end interconnect structures in microelectronic devices. J. Electron. Mater 32(10): 1059-1071

Saurindranath, S.E.N. 1987: Deformation and its role in regional metamorphism - La déformation et son rôle dans le métamorphisme régional. Annual General Meeting 62 59(4): 278-288

Hisada, T.; Takagi, H. 1992: Deformation and kinematics of the fault rocks in the Shajigami Shear Zone, eastern margin of the Abikuma Mountains, Northeast Japan. Chishitsugaku Zasshi 98(2): 137-154

Arnold, S.M.; Saleeb, A.F.; Alzoubi, N.R. 2002: Deformation and life analysis of composite flywheel disk systems. Composites. Part B, Engineering 33(6): 433-459

Mcdonald, R.J.; Kurath, P. 2006: Deformation and life estimates for a metal matrix- : Spherical particulate subjected to thermomechanical loading. Journal of Engineering Materials and Technology 128(3): 401-418

Shukaev, S.N. 2001: Deformation and life of titanium alloy VT9 under conditions of nonproportional low-cycle loading. Strength of Materials 33(4): 333-338

Yuren, T.I.A.N.; Holt, R.G.; Apfel, R.E. 1993: Deformation and location of an acoustically levitated liquid drop. The Journal of the Acoustical Society of America 93(6): 3096-3104

Sierra, F.; Schedl, A.; Mccabe, C.; Robbins, D.R. 1993: Deformation and magnetization of the Hudson Valley, eastern New York: results of a study of calcite twinning and anisotropy of magnetic remanence in the Onondaga Limestone. Tectonophysics 217(3-4): 321-329

Sumitomo, T.; Han, H.U.A.N.G.; Libo, Z.H.O.U. 2011: Deformation and material removal in a nanoscale multi-layer thin film solar panel using nanoscratch. International Journal of Machine Tools and Manufacture 51(3): 182-189

Valberg, H.; Grnseth, R.A. 1993: Deformation and metal flow when extruding hollow aluminium profiles. International Journal of Materials and Product Technology 8(1): 1-22

Kruhl, J.H. 1984: Deformation and metamorphism at the base of the Helgeland nappe complex, northwest of Grong (Northern Norway) - Déformation et métamorphisme à la base du complexe de la Nappe de Helgeland, nord ouest de Grong, Norvège Nord. Geologische Rundschau (1910. Print) 73(2): 735-751

Vogler, W.S.; Voll, G. 1981: Deformation and Metamorphism at the South-Margin of the Alps, East of Bellinzona, Switzerland - Déformation et métamorphisme de la bordure sud des Alpes Est de Bellinzona Suisse. Geologische Rundschau (1910. Print) 70(3): 1232-1262

Ellero, A.; Leoni, L.; Marroni, M.; Nicolae, I.; Pandolfi, L.; Sartori, F. 2002: Deformation and metamorphism in the Fenes Nappe (southern Apuseni Mountains, Romania) - Déformation et métamorphisme dans la nappe de Fenes (Monts Apuseni méridionaux, Roumanie). Comptes Rendus. Geoscience 334(5): 347-354

Zelazniewicz, A. 1990: Deformation and metamorphism in the Gory Sowie gneiss complex, Sudetes, SW Poland. Neues Jahrbuch für Geologie und Palaontologie. Abhandlungen 179(2-3): 129-157

Sakellariou, D.T. 1989: Deformation and metamorphism of the Serbomacedonian massif in NE Chalkidiki (Northern Greece). Delt. Ell. Geol. Etair 23(1): 47-61

Khoroshun, L.P.; Nazarenko, L.V. 2003: Deformation and microdamage of a discrete-fibrous composite with transversely isotropic components. International Applied Mechanics 39(6): 696-703

Bhatt, V.P.; Patel, R.M.; Desai, C.F. 1983: Deformation and microhardness studies on KCPO4 single crystals. Crystal Research and Technology (1979) 18(9): 1173-1179

Prithvi Raj, D.H.A.R.; Bamzai, K.; Kotru, P.N. 1997: Deformation and microhardness studies on natural apophyllite crystals. Crystal Research and Technology (1979) 32(4): 537-544

Koester, D.A.; More, K.L.; Davis, R.F. 1991: Deformation and microstructural changes in SiC whisker-reinforced Si3N4 composites. Journal of Materials Research 6(12): 2735-2746

Semiatin, S.L.; Seetharaman, V. 1995: Deformation and microstructure development during hot-pack rolling of a near-gamma titanium aluminide alloy. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science 26(2): 371-381

Kartika, I.; Matsumoto, H.; Chiba, A. 2009: Deformation and Microstructure Evolution in Co-Ni-Cr-Mo Superalloy during Hot Working. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science 40(6): 1457-1468

Xuhe, L.I.U.; Guanjun, D.U.; Ruizhi, W.U.; Zhongyi, N.I.U.; Milin, Z.H.A.N.G. 2011: Deformation and microstructure evolution of a high strain rate superplastic Mg―Li―Zn alloy. Journal of Alloys and Compounds 509(39): 9558-9561

Yoo Dong, H.A.H.N.; Whang, S.H. 1995: Deformation and microstructure in L10 type Ti-Al-V alloys. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science 26(1): 113-131

Picu, R.C.; Vincze, G.T.; Gracio, J.J. 2011: Deformation and microstructure-independent Cottrell-Stokes ratio in commercial Al alloys. International Journal of Plasticity 27(7): 1045-1054

Xiaoqiang, L.I.; Almazouzi, A. 2009: Deformation and microstructure of neutron irradiated stainless steels with different stacking fault energy. J. Nucl. Mater 385(2): 329-333

Takemoto, Y.; Hida, M.; Sakakibara, A. 1997: Deformation and microstructure of Ti-14Mo alloy in over aged state. Materials Transactions - Jim 38(12): 1067-1071

Siemers, C.; Mukherji, D.; Baker, M.; Rosler, J. 2001: Deformation and microstructure of titanium chips and workpiece. Zeitschrift für Metallkunde 92(8): 853-859

Ye, Y.A.O.; Yechun, W.A.N.G.; Beussman, K.M. 2014: Deformation and migration of a leaky-dielectric droplet in a steady non-uniform electric field. Microfluidics and Nanofluidics 17(5): 907-921

Naka, Y.; Nemoto, N.; Yihu, S.O.N.G. 2005: Deformation and molecular orientation in films of metallocene polypropylene, ethylene-butylene rubber, and their 80/20 (w/w) blend revealed by the simultaneous kinetic measurement of microscopic infrared dichroism, macroscopic stress, and mesoscale strain. Journal of Polymer Science. Part B. Polymer Physics 43(12): 1520-1531

Li, Z.M.; Fu, X.R.; Shuying, Y.A.N.G.; Yang, M.B.; Wei, Y.A.N.G.; Huang, R. 2004: Deformation and morphology development of poly(ethylene terephthalate)/polyethylene and polycarbonate/polyethylene blends with high interfacial contact during elongation. Polymer Engineering and Science 44(8): 1561-1570

Asakura, H.; Nakajima, A.; Sakai, M.; Suzuki, S.; Kameshima, Y.; Okada, K. 2007: Deformation and motion by gravity and magnetic field of a droplet of water-based magnetic fluid on a hydrophobic surface. Applied Surface Science 253(6): 3098-3102

Berezyuk, A.I.; Timonin, A.I. 2002: Deformation and operational safety of masonry in commercial uranium-graphite reactors. Atomic Energy (New York, N.Y.) 92(4): 322-330

Kabir, R.; Albuerne, J.; Simon, P.F.W.; Filiz, V.; Abetz, C.; Bottcher, H.; Perlich, J.; Abetz, V. 2013: Deformation and orientation behavior of polystyrene-b-polybutadiene-b-poly(methyl methacrylate) triblock terpolymers: Influence of polybutadiene microstructures and the molar masses. Polymer (Guildford) 54(2): 673-684

Handge, U.A.; Potschke, P. 2007: Deformation and orientation during shear and elongation of a polycarbonate/carbon nanotubes composite in the melt. Rheologica Acta 46(6): 889-898

Bruning, K.; Schneider, K.; Heinrich, G. 2012: Deformation and Orientation in Filled Rubbers on the Nano- and Microscale Studied by X-Ray Scattering. Journal of Polymer Science. Part B. Polymer Physics 50(24): 1728-1732

Pierleoni, C.; Ryckaert, J.P. 1995: Deformation and orientation of flexible polymers in solution under shear flow : a new picture for intermediate reduced shear rates. Macromolecules 28(14): 5097-5108

Mavridis, H.; Hrymak, A.N.; Vlachopoulos, J. 1986: Deformation and orientation of fluid elements behind an advancing flow front. Journal of Rheology (New York) 30(3): 555-563

Vananroye, A.; Van Puyvelde, P.; Moldenaers, P. 2011: Deformation and orientation of single droplets during shear flow: combined effects of confinement and compatibilization. Rheologica Acta 50(3): 231-242

Wen, H.M. 1996: Deformation and perforation of clamped work-hardening plates struck transversely by blunt missiles. Nuclear Engineering and Design 160(1-2): 51-58

Wen, H.M.; Reid, S.R. 1998: Deformation and perforation of cylindrical shells struck normally by blunt projectiles. International Journal of Pressure Vessels and Piping 75(3): 213-219

Wen, H.M. 1998: Deformation and perforation of spherical shells by normal impact of blunt-ended projectiles. Mechanics of Structures and Machines 26(3): 239-255

Kratochvil, P.; Biegel, W.; Sprusil, B.; Chalupa, B. 1992: Deformation and phase stability of Ni2CuSn intermetallic compound. Physica Status Solidi. A. Applied Research 131(2): 321-332

Tugcu, P.; Neale, K.W. 1991: Deformation and plastic waves in dynamic tension tests. International Journal of Mechanical Sciences 33(10): 815-827

Takeda, T.; Takano, S.; Shindo, Y.; Narita, F. 2005: Deformation and progressive failure behavior of woven-fabric-reinforced glass/epoxy composite laminates under tensile loading at cryogenic temperatures. Composites Science and Technology 65(11-12): 1691-1702

Ono, H. 1992: Deformation and random walk of soliton due to weak inhomogeneity. Journal of the Physical Society of Japan 61(10): 3559-3565

Fujimoto, H.; Hatta, N. 1996: Deformation and rebounding processes of a water droplet impinging on a flat surface above Leidenfrost temperature. Journal of Fluids Engineering 118(1): 142-149

Soer, W.A.; Chezan, A.R.; De Hosson, J.T.M. 2006: Deformation and reconstruction mechanisms in coarse-grained superplastic Al-Mg alloys. Acta Materialia 54(14): 3827-3833

Rajesh, S.H.A.R.M.A.; Tripathi, B.; Thakur, V.C. 1992: Deformation and recrystallisation effects on fluid inclusions in mylonitic augen gneiss of Chenab Valley, Doda district (J&K). Indian Journal of Earth Sciences 19(4): 171-176

Knutsen, R.D.; Petersen, S. 2012: Deformation and recrystallisation of powder processed commercially pure titanium. Powder Metallurgy 55(5): 340-347

Jensen, D.J. 2000: Deformation and recrystallisation studied by EBSP : breakthroughs and limitations. Materials Congress 200 16(11-12): 1360-1363

Semiatin, S.L.; Weaver, D.S.; Fagin, P.N.; Glavicic, M.G.; Goetz, R.L.; Frey, N.D.; Kramb, R.C.; Antony, M.M. 2004: Deformation and recrystallization behavior during hot working of a coarse-grain, nickel-base superalloy ingot material. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science 35(2): 679-693

Saito, Y.; Sakai, T.; Maeda, F.; Kato, K. 1986: Deformation and recrystallization behavior of ferritic stainless steel in high speed hot rolling - Umform- und Rekristallisationsverhalten von ferritischen nichtrostenden Staehlen beim Warmwalzen mit hohen Geschwindigkeiten. Tetsu-To-Hagane 72(7): 799-806

Inoko, F.; Kashihara, K.; Tagami, M.; Okada, T. 2011: Deformation and recrystallization in aluminum single- and bi-crystals (2) Single crystals deformed with deformation bands kink bands and SBSSs. Keikinzoku 61(9): 475-484

Yoshikawa, T.; Inoko, F. 1995: Deformation and recrystallization in silver bicrystals with different tensile directions. Nippon Kinzoku Gakkaishi (1952) 59(4): 366-372

Buatier, M.; Van Roermund, H.L.M.; Drury, M.R.; Lardeaux, J.M. 1991: Deformation and recrystallization mechanisms in naturally deformed omphacites from the Sesia-Lanzo zone - geophysical consequences. Tectonophysics 195(1): 11-27

Liu, Y.L.; Hsun, H.U.; Hansen, N. 1995: Deformation and recrystallization of a channel die compressed aluminium bicrystal with (112)[111]/(123)[412] orientation. Acta Metallurgica et Materialia 43(6): 2395-2405

Solas, D.E.; Tome, C.N.; Engler, O.; Wenk, H.R. 2001: Deformation and recrystallization of hexagonal metals : Modeling and experimental results for zinc. Acta Materialia 49(18): 3791-3801

Okada, T.; Sakaguchi, M.; Ashida, O.; Tagami, M.; Inoko, F. 2005: Deformation and recrystallization of tensile-deformed or rolled Fe-3%Si alloy single crystals. Isij International 45(2): 248-253

Hong, S.H.; Dong Nyung, L.E.E. 2002: Deformation and recrystallization textures in cross-rolled copper sheet. Journal of Engineering Materials and Technology 124(1): 13-22

Ozturk, T. 1988: Deformation and recrystallization textures in cross-rolled sheets of copper and α-brass - Textures de déformation et de recristallisation dans des tôles de cuivre et de laiton α laminées de façon transversale. Scripta Metallurgica 22(10): 1611-1616

Kong, X.Y.; Liu, W.C.; Li, J.; Yuan, H. 2010: Deformation and recrystallization textures in straight-rolled and pseudo cross-rolled AA 3105 aluminum alloy. Journal of Alloys and Compounds 491(1-2): 301-307

Hong, S.H.; Jeong, H.T.; Choi, C.H.; Lee, D.N. 1997: Deformation and recrystallization textures of surface layer of copper sheet. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 229(1-2): 174-181

Finlayson, E.J.; Rock, N.M.S.; Golding, S.D. 1988: Deformation and regional carbonate metasomatism of turbidite-hosted Cretaceous alkaline lamprophyres (northwestern Papua New Guinea) - Déformation et métasomatose régionale carbonatée des lamprophyres alcalines crétacées situées dans des turbidites, Papouasie, Nouvelle-Guinée, Nord-Ouest. Chemical Geology 69(3-4): 215-233

Xue, L.I.; Sui, Z.H.A.N.G.; Fengjiang, F.U.; Chung, T.S. 2013: Deformation and reinforcement of thin-film composite (TFC) polyamide-imide (PAI) membranes for osmotic power generation. Journal of Membrane Science 434: 204-217

Pellerin, C.; Prudhomme, R.E.; Pezolet, M.; Weinstock, B.A.; Griffiths, P.R. 2003: Deformation and relaxation of polymers studied by ultrarapid scanning FT-IR spectrometry. Macromolecules 36(13): 4838-4843

Lauger, J.; Robertson, C.R.; Frank, C.W.; Fuller, G.G. 1996: Deformation and relaxation processes of mono- and bilayer domains of liquid crystalline Langmuir films on water. Langmuir 12(23): 5630-5635

Rizhi, W.A.N.G.; Lei, T.C. 1993: Deformation and restoration behaviour of ferrite-austenite two-phase structures. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 165(1): 19-27

Markiewicz, M.E.; Erbacher, F.J. 1991: Deformation and rupture behavior of Argentine zircaloy-4 cladding tubes in the temperature range from 700 to 1200°C at different heating rates in inert atmosphere. Kernforschungszentrum Karlsruhe (4938): 1-48

Viviani, A.; Zuev, A. 2008: Deformation and rupture of a horizontal liquid layer by thermal and solutal Marangoni flows : Theory and applications. Energy Conversion and Management 49(11): 3232-3236

Olson, M.D.; Nurick, G.N.; Fagnan, J.R. 1993: Deformation and rupture of blast loaded square plates―predictions and experiments. International Symposium on Structural Crashworthiness and Failure 13(2): 279-291

Miller, J.F.; Mitra, S. 2011: Deformation and secondary faulting associated with basement-involved compressional and extensional structures. Aapg Bulletin 95(4): 675-689

Mach, H.; Moszynski, M.; Gill, R.L.; Wohn, F.K.; Winger, J.A.; Hill, J.C.; Molnar, G.; Sistemich, K. 1989: Deformation and shape coexistence of O+ states in 98Sr and 100Zr. Physics Letters. Section B 230(1-2): 21-26

Sasaki, M.; Houzaki, G.; Koyano, M.; Inoue, M. 1996: Deformation and sliding motion of charge-density-waves in η-Mo4O11 under pulsed electric field. The Journal of Physics and Chemistry of Solids 57(3): 281-287

Amos, K.; Raynal, J. 1989: Deformation and spin 1 effects. Australian Journal of Physics 42(6): 591-596

Davidson, M.R. 1998: Deformation and spreading of an inviscid drop impinging on a solid surface. International Conference on Advances in Fluid Mechanics 2: 295-305

Kornev, V.M.; Tikhomirov Yu, V. 1993: Deformation and stability loss of a part of the atomic chain at the tip of a crack. Journal of Applied Mechanics and Technical Physics 34(3): 439-448

Chen, J.S.; Wu, H.H. 2011: Deformation and stability of an elastica under a point force and constrained by a flat surface. International Journal of Mechanical Sciences 53(1): 42-50

Lyakh, A.I.; Makeev, E.M.; Yashchenko, A.F. 1990: Deformation and stability of conical shells in edge local loading. Strength of Materials 22(12): 1750-1756

Cheng, K.J.; Chaddock, J.B. 1984: Deformation and stability of drops and bubbles in an electric field. Physics Letters. a 106(1-2): 51-53

Mossakovskii, V.I.; Miltsyn, A.M.; Olevskii, V.I. 1990: Deformation and stability of technologically imperfect cylindrical shells in a nonuniform stress state. Strength of Materials 22(12): 1745-1750

Sivakumar Babu, G.L.; Singh, V.P. 2009: Deformation and stability regression models for soil nail walls. Proceedings of the Institution of Civil Engineers - Geotechnical Engineering 162(4): 213-223

Berghaus, D.G.; Peacock, H.B. 1985: Deformation and strain analysis for high extrusion ratios and elevated temperatures - Verformungs- und Dehnungsanalyse fuer hohe Extrusionsverhaeltnisse und erhoehte Temperaturen. Experimental Mechanics 25(3): 301-307

Prchlik, L.; Pisacka, J.; Sampath, S. 2003: Deformation and strain distribution in plasma sprayed nickel-aluminum coating loaded by a spherical indenter. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 360(1-2): 264-274

Seif, M.A.; Mohr, P.J.; Moslehy, F.A.; Rice, S.L. 1990: Deformation and strain fields in pin specimens in sliding contact by laser speckle and metallographic techniques. Journal of Tribology 112(3): 506-513

Sugimoto, K.; Sakaki, T.; Fukusato, T.; Miyagawa, O. 1984: Deformation and strain hardening of martensite in 1.4 % Mn. Tetsu-To-Hagane 70(14): 1712-1718

Gonzalez, S.; Xie, G.Q.; Louzguineluzgin, D.V.; Perepezko, J.H.; Inoue, A. 2011: Deformation and strain rate sensitivity of a Zr―Cu―Fe―Al metallic glass. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 528(9): 3516-3522

Tu, W.J.; Pollock, T.M. 2010: Deformation and Strain Storage Mechanisms during High-Temperature Compression of a Powder Metallurgy Nickel-Base Superalloy. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science 41(8): 2002-2009

Mori, K.; Sugibayashi, T. 1992: Deformation and strengh of stepped-lap joints bonded with adhesive resin. Journal of Strain Analysis for Engineering Design 27(3): 171-175

Cho, J.W.; Kim, H.; Jeon, S.; Min, K.B. 2012: Deformation and strength anisotropy of Asan gneiss, Boryeong shale, and Yeoncheon schist. International Journal of Rock Mechanics and Mining Sciences (1997) 50: 158-169

Sinharoy, S.; Virronic, P.; Milligan, W.W. 2001: Deformation and strength behavior of two nickel-base turbine disk alloys at 650 °C. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science 32(8): 2021-2032

Xiaodong, Z.H.A.O.; Guoqing, Z.H.O.U.; Jianzhou, W.A.N.G. 2013: Deformation and strength behaviors of frozen clay with thermal gradient under uniaxial compression. Tunnelling and Underground Space Technology 38: 550-558

Panfilov, R.A.; Ustyantsev, V.M.; Remezova, T.I.; Postnikova, S.P.; Landa, M.Y.A.; Nikolaev, V.V. 1991: Deformation and strength characteristics of magnesia-spinnellide refractories at elevated temperatures. Refractories (New York) 32(7-8): 403-406

Mizoguchi, K.; Hirano, T. 1985: Deformation and strength of an underground pipe. Bulletin of the Jsme 28(238): 594-600

Kucher, N.K.; Zemtsov, M.P. 2001: Deformation and strength of carbon laminates at temperatures of 293 and 77 K. Strength of Materials 33(3): 230-237

Gogotsi, G.A.; Ostrovoy, D.Y.U. 1995: Deformation and strength of engineering ceramics and single crystals. Journal of the European Ceramic Society 15(4): 271-281

Teregulov, I.G.; Sibgatullin, E.S.; Falyakhhov, M.A. 1995: Deformation and strength of hybrid composites reinforced with unidirectional fibers. I: Numerical models. International Conference on the Mechanics of Composite Materials 9 31(2): 131-136

Lamashevskii, V.P.; Makovetskii, I.V. 2005: Deformation and strength of malleable cast iron in the complex stressed state. Strength of Materials 37(5): 489-498

Singh, G.; Bajargan, G.; Datta, R.; Ramamurty, U. 2014: Deformation and strength of Ti-6Al-4V alloyed with B at cryogenic temperatures. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 611: 45-57

Curiel, T.; Fernlund, G. 2008: Deformation and stress build-up in bi-material beam specimens with a curing FM300 adhesive interlayer. Composites. Part A, Applied Science and Manufacturing 39(2): 252-261

Mizoguchi, K.; Hirano, T.; Yasuda, S. 1984: Deformation and stress in a cylindrical shell hanging on ropes. Bulletin of the Jsme 27(225): 391-397

Hirano, T.; Mizoguchi, K. 1985: Deformation and stress in a horizontal reservoir supported along generators. Bulletin of the Jsme 28(246): 2846-2852

Mukhopadhyay, A.; Sheldon, B.W. 2014: Deformation and stress in electrode materials for Li-ion batteries. Progress in Materials Science 63: 58-116

Hsu, T.C.; Geil, P.H. 1989: Deformation and stress-induced transformation of polybutene-1. Journal of Macromolecular Science. Physics 28(1): 69-95

Durodola, J.F.; Attia, O. 2000: Deformation and stresses in functionally graded rotating disks. Composites Science and Technology 60(7): 987-995

Paul, A.; Jayaram, V. 2011: Deformation and structural densification in Al2O3-Y2O3 glass. Acta Materialia 59(1): 82-92

Nurick, G.N.; Olson, M.D.; Fagnan, J.R.; Levin, A. 1995: Deformation and tearing of blast-loaded stiffened square plates. International Journal of Impact Engineering 16(2): 273-291

Gupta, N.K.; Nagesh, K. 2007: Deformation and tearing of circular plates with varying support conditions under uniform impulsive loads. International Conference on Impact Loading of Lightweight Structures 34(1): 42-59

Wen, H.M. 1998: Deformation and tearing of clamped circular work-hardening plates under impulsive loading. International Journal of Pressure Vessels and Piping 75(1): 67-73

Heming, W.E.N. 1996: Deformation and tearing of clamped work-hardening beams subjected to impulsive loading. International Journal of Impact Engineering 18(4): 425-433

Chakravarthy, P.; Chakkingal, U.; Venugopal, P. 2011: Deformation and temperature aided sintering during hooker extrusion of sintered PM preforms of steel. Powder Metallurgy 54(3): 193-201

Bellinger, M.A.; Sauer, J.A.; Hara, M. 1994: Deformation and tensile fracture behaviour of sulfonated polystyrene ionomers : effects of counterion and excess neutralizing agent. Polymer (Guildford) 35(25): 5478-5482

Yi, S.B.; Davies, C.H.J.; Brokmeier, H.G.; Bolmaro, R.E.; Kainer, K.U.; Homeyer, J. 2006: Deformation and texture evolution in AZ31 magnesium alloy during uniaxial loading. Acta Materialia 54(2): 549-562

Engler, O. 2000: Deformation and texture of copper-manganese alloys. Acta Materialia 48(20): 4827-4840

Kawamura, T.; Matsumoto, T. 1992: Deformation and thermal oxidation of GaAsP wafers locally heated by a Nd:Y3al5O12 (yttrium aluminum garnet) laser beam. Journal of Applied Physics 72(10): 4638-4642

Stout, R.B. 1984: Deformation and thermodynamic response for a crack dislocation model of brittle fracture. Engineering Fracture Mechanics 19(3): 545-570

Tregub, A.; Kargerkocsis, J.; Konnecke, K.; Zimmermann, H.J. 1995: Deformation and thermoelastic behavior of poly(aryl ether ketones). Macromolecules 28(11): 3890-3893

Van der Sanden, M.C.M.; Buijs, L.G.C.; De Bie, F.O.; Meijer, H.E.H. 1994: Deformation and throughness of polymeric systems. V: A critical examination of multilayered structures. Polymer (Guildford) 35(13): 2783-2791

Van der Sanden, M.C.M.; Meijer, H.E.H.; Lemstra, P.J. 1993: Deformation and toughness of polymeric systems. I: The concept of a critical thickness. Polymer (Guildford) 34(10): 2148-2154

Van der Sanden, M.C.M.; Meijer, H.E.H.; Tervoort, T.A. 1993: Deformation and toughness of polymeric systems. II: Influence of entanglement density. Polymer (Guildford) 34(14): 2961-2970

Van der Sanden, M.C.M.; Meijer, H.E.H. 1993: Deformation and toughness of polymeric systems. III: Influence of crosslink density. Polymer (Guildford) 34(24): 5063-5072

Van der Sanden, M.C.M.; Meijer, H.E.H. 1994: Deformation and toughness of polymeric systems. IV: Influence of strain rate and temperature. Polymer (Guildford) 35(13): 2774-2782

Van der Sanden, M.C.M.; Meijer, H.E.H. 1994: Deformation and toughness of polymeric systems. VI: Critical thickness of diluted entanglement networks. Polymer (Guildford) 35(14): 2991-2994

Van der Sanden, M.C.M.; De Kok, J.M.M.; Meijer, H.E.H. 1994: Deformation and toughness of polymeric systems. VII: Influence of dispersed rubbery phase. Polymer (Guildford) 35(14): 2995-3004

Chung, J.H.; Chang, Y.W. 1993: Deformation and transformation processes of a multi-phase sheet steel containing retained austenite. Tetsu-To-Hagane 79(6): 665-670

Miyazaki, S.; Otsuka, K. 1986: Deformation and transition behavior associated with the R-phase in Ni-Ti alloys - Deformations-Umwandlungsverhalten in Ti-Ni-Legierungen unter Beruecksichtigung der rhomboedrischen Phase. Metallurgical Transactions. A, Physical Metallurgy and Materials Science 17(1): 53-63

De Feraudy, M.F.; Torchet, G. 2000: Deformation and twin faults in large argon clusters. Journal of Crystal Growth 217(4): 449-457

Shiga, T. 1997: Deformation and viscoelastic behavior of polymer gels in electric fields. Advances in Polymer Science 134: 131-163

Seif, M.A.; Moslehy, F.A.; Rice, S.L. 1993: Deformation and warping in magnetic tapes by laser speckle technique. Journal of Elastomers and Plastics 25(3): 216-223

Bloo, M.L.; Haitjema, H.; Pril, W.O. 1999: Deformation and wear of pyramidal, silicon-nitride AFM tips scanning micrometre-size features in contact mode. Measurement 25(3): 203-211

Ritter, J.C.; Dixon, B.F.; Baldwin, N.J. 1989: Deformation and weld repair of armour steel - Déformation et séparation par soudage d'un acier de blindage. Materials Forum (Rushcutters Bay) 13(3): 216-224

Fujiwara, M. 1997: Deformation anisotropy of β-Sn crystals by microindenter. Icsma 11: International Conference on the Strength of Materials 234-236: 991-995

Hanson, D.R.; Spetzler, H.A.; Getting, I.C. 1993: Deformation apparatus for use in high-resolution, high-temperature studies of mantle rheology. Review of Scientific Instruments 64(1): 211-217

Mazov, M.V.; Firsova, T.I.; Golubev, V.A. 1989: Deformation area geometry during longitudinal asymmetric periodic rolling process. Izvestija Vyssih Ucebnyh Zavedenij. Cernaja Metallurgija (3): 53-56

Olevsky, E.; Skorohod, V. 1993: Deformation aspects of anisotropic-porous bodies sintering. J. Phys., Iv 3(7): 739-742

Xu, J.; Collins, G.S.; Peng, L.S.J.; Atzmon, M. 1999: Deformation-assisted decomposition of unstable Fe50Cu50 solid solution during low-energy ball milling. Acta Materialia 47(4): 1241-1253

Quesnel, D.J. 1986: Deformation at minimum elastic strain energy - Déformation à énergie minimale de déformation élastique. Scripta Metallurgica 20(11): 1591-1596

Minshull, T.A.; White, R.S.; Barton, P.J.; Collier, J.S. 1992: Deformation at plate boundaries around the Gulf of Oman. Mar. Geol 104(1-4): 265-277

Skvortsova, Z.N.; Kasyanova, I.V.; Porodenko, E.V.; Traskine, V.Y. 2007: Deformation at the contacts of sodium chloride crystals in the presence of water. Colloid Journal (Moscow) 69(5): 643-646

Morris, J.W.; Krenn, C.R.; Roundy, D.; Cohen, M.L. 2001: Deformation at the limit of elastic stability. Dislocations 2000: International Conference on the Fundamentals of Plastic Deformation 309-310: 121-124

Nix, W.D.; Greer, J.R.; Gang, F.E.N.G.; Lilleodden, E.T. 2007: Deformation at the nanometer and micrometer length scales : Effects of strain gradients and dislocation starvation. Tms 2005 Symposium - Mechanical Behaviour of Thin Films and small Structures 515(6): 3152-3157

Savva, G.C.; Weatherly, G.C.; Kirkaldy, J.S. 1996: Deformation attending internal nitridation of Ni-Ti alloys. Scripta Materialia 34(7): 1087-1093

Li, L.I. 2011: Deformation band and texture of a cast Mg―RE alloy under uniaxial hot compression. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 528(24): 7178-7185

Wert, J.A.; Kashihara, K.; Okada, T.; Huang, X.; Inoko, F. 2005: Deformation band evolution in [110] Al single crystals strained in tension. Philosophical Magazine (2003. Print) 85(18): 1989-2006

Lee, W.B.; To, S.; Chan, C.Y. 1999: Deformation band formation in metal cutting. Scripta Materialia 40(4): 439-443

Lee, C.S.; Duggan, B.J. 1993: Deformation banding and copper-type rolling textures. Acta Metallurgica et Materialia 41(9): 2691-2699

Guanglei, L.I.U.; Duggan, B.J. 2001: Deformation banding and ferrite-type rolling textures. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science 32(1): 125-134

Lee, C.S.; Smallman, R.E.; Duggan, B.J. 1994: Deformation banding and formation of cube volumes in cold rolled fcc metals. Materials Science and Technology 10(10): 862-868

Lee, C.S.; Duggan, B.J.; Smallman, R.E. 1993: Deformation banding and its influence on deformation textures formation. J. Phys., Iv 3(7): 2027-2032

Tse, Y.Y.; Liu, G.L.; Duggan, B.J. 1999: Deformation banding and nucleation of recrystallisation in IF steel. Scripta Materialia 42(1): 25-30

Quadir, M.Z.; Duggan, B.J. 2004: Deformation banding and recrystallization of α fibre components in heavily rolled IF steel. Acta Materialia 52(13): 4011-4021

Mahesh, S. 2006: Deformation banding and shear banding in single crystals. Acta Materialia 54(17): 4565-4574

Bate, P.; Oscarsson, A. 1990: Deformation banding and texture in hot rolled Al-1.0Mn-1.2Mg alloy. Materials Science and Technology 6(6): 520-527

Liang, Z.H.U.; Seefeldt, M.; Verlinden, B. 2012: Deformation banding in a Nb polycrystal deformed by successive compression tests. Acta Materialia 60(10): 4349-4358

Lee, C.S.; Duggan, B.J.; Smallman, R.E. 1993: Deformation banding in copper. Philosophical Magazine Letters 68(4): 185-190

Cizek, P.; Wynne, B.P.; Lu, H.; Parker, B.A. 1996: Deformation banding in (001)[110] textured aluminium sheet deformed in tension. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 219(1-2): 44-55

Basson, F.; Driver, J.H. 2000: Deformation banding mechanisms during plane strain compression of cube-oriented f.c.c. crystals. Acta Materialia 48(9): 2101-2115

Duggan, B.J.; Lee, C.S. 1992: Deformation banding, original grain size and recrystallization in FCC intermediate-to-high SFE metals. Scr. Metall. Mater 27(11): 1503-1507

Mahesh, S.; Tome, C.N. 2004: Deformation banding under arbitrary monotonic loading in cubic metals. Philosophical Magazine (2003. Print) 84(33): 3517-3546

Li, Y.; Li, S.X.; Li, G.Y. 2004: Deformation bands and dislocation structures of [1 5 5] coplanar double-slip-oriented copper single crystal under cyclic deformation. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 372(1-2): 75-80

Mcnelley, T.R.; Swisher, D.L.; Perezprado, M.T. 2002: Deformation bands and the formation of grain boundaries in a superplastic aluminum alloy. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science 33(2): 279-290

Fossen, H.; Hesthammer, J. 1998: Deformation bands and their significance in porous sandstone reservoirs. First Break 16(1): 21-25

Fossen, H. 2010: Deformation bands formed during soft-sediment deformation: Observations from SE Utah. Marine and Petroleum Geology 27(1): 215-222

Sergo, V.; Clarke, D.R.; Pompe, W. 1995: Deformation bands in ceria-stabilized tetragonal zirconia/alumina. I: Measurement of internal stresses. Journal of the American Ceramic Society 78(3): 633-640

Sergo, V.; Clarke, D.R. 1995: Deformation bands in ceria-stabilized tetragonal zirconia/alumina. II: Stress-induced aging at room temperature. Journal of the American Ceramic Society 78(3): 641-644

Lit, X.W.; Wang, Z.G.; Li, S.X. 2000: Deformation bands in cyclically deformed copper single crystals. Philosophical Magazine. A. Physics of Condensed Matter. Structure, Defects and Mechanical Properties 80(8): 1901-1912

Exner, U.; Grasemann, B. 2010: Deformation bands in gravels: displacement gradients and heterogeneous strain. Journal of the Geological Society (London) 167: 905-913

He, J.; Fukuyama, S.; Yokogawa, K. 1995: Deformation bands in Inconel 718. Materials Science and Technology 11(9): 914-919

Kuhlmannwilsdorf, D.; Kulkarni, S.S.; Moore, J.T.; Starke, E.A. 1999: Deformation bands, the LEDS theory, and their importance in texture development : Part I. Previous evidence and new observations. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science 30(9): 2491-2501

Kuhlmannwilsdorf, D. 1999: Deformation bands, the LEDS theory, and their importance in texture development : Part II. Theoretical conclusions. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science 30(9): 2391-2401

Su, M.N.; Ben, Y.O.U.N.G.; Gardner, L. 2014: Deformation-based design of aluminium alloy beams. Engineering Structures 80: 339-349

Shewbridge, S.E.; Sitar, N. 1990: Deformation-based model for reinforced sand. Journal of Geotechnical Engineering 116(7): 1153-1170

Pandey, K.N.; Chand, S. 2003: Deformation based temperature rise: a review. International Journal of Pressure Vessels and Piping 80(10): 673-687

Wei, B.C.; Yu, G.S.; Loser, W.; Xia, L.; Roth, S.; Wang, W.H.; Eckert, J. 2004: Deformation behavior and dilatometric measurements of Nd-Fe based bulk metallic glass. Rapidly Quenched and Metastable Materials. International Conference 375-377: 1161-1164

Ya, Z.H.A.N.G.; Xiaoqing, Z.E.N.G.; Chen, L.U.; Wenjiang, D.I.N.G. 2006: Deformation behavior and dynamic recrystallization of a Mg-Zn-Y-Zr alloy. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 428(1-2): 91-97

Favre, J.; Koizumi, Y.; Chiba, A.; Fabregue, D.; Maire, E. 2013: Deformation Behavior and Dynamic Recrystallization of Biomedical Co-Cr-W-Ni (L-605) Alloy. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science 44(6): 2819-2830

Zhao, J.X.; Qu, R.T.; Wu, F.F.; Li, S.X.; Zhang, Z.F. 2010: Deformation behavior and enhanced plasticity of Ti-based metallic glasses with notches. Philosophical Magazine (2003. Print) 90(29-30): 3867-3877

Rajeev, K.A.P.O.O.R.; Vecchio, K.S. 1995: Deformation behavior and failure mechanisms in particulate reinforced 6061 Al metal-matrix composites. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 202(1-2): 63-75

Kitazawa, K. 1999: Deformation behavior and forming limit in the process of orbital rotary inward-flanging of aluminum tubes. Keikinzoku 49(3): 118-122

Fair, G.H.; Wood, J.V.; Nakano, T.; Umakoshi, Y. 1993: Deformation behavior and high-temperature stability of unidirectionally solidified, twin phase TiAl. Journal of Materials Research 8(8): 1812-1816

Lorenzomartin, C.; Singh, D.; Johnson, J.; Routbort, J.L. 2007: Deformation behavior and joining of a MgF2 optical ceramic. J. Eur. Ceram. Soc 27(11): 3371-3376

Bram, M.; Reckers, S.; Drinovac, P.; Monch, J.; Steinbrech, R.W.; Buchkremer, H.P.; Stover, D. 2004: Deformation behavior and leakage tests of alternate sealing materials for SOFC stacks. Journal of Power Sources 138(1-2): 111-119

Nasu, S.; Ohtani, A.; Nakai, A.; Hamada, H. 2010: Deformation behavior and mechanical properties of braided rectangular pipes. Composite Structures 92(3): 752-756

Ying, H.A.N.; Guiwu, L.I.U.; Dening, Z.O.U.; Rong, L.I.U.; Guanjun, Q.I.A.O. 2013: Deformation behavior and microstructural evolution of as-cast 904L austenitic stainless steel during hot compression. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 565: 342-350

Ling, Z.H.O.N.G. 2000: Deformation behavior and microstructure effect in 2124Al/SiCp composite. Journal of Composite Materials 34(2): 101-115

Hu, H.E.; Zhen, L.; Yang, L.; Shao, W.Z.; Zhang, B.Y. 2008: Deformation behavior and microstructure evolution of 7050 aluminum alloy during high temperature deformation. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 488(1-2): 64-71

Jiang, H.W.; Li, N.; Xiong, Y.Y.; Li, Z.G.; Liu, L. 2014: Deformation behavior and microstructure evolution of pure Cu subjected to electromagnetic bulging. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 593: 127-135

Petit, B.; Gey, N.; Cherkaoui, M.; Belle, B.; Humbert, M. 2007: Deformation behavior and microstructure/texture evolution of an annealed 304 AISI stainless steel sheet. Experimental and micromechanical modeling. International Journal of Plasticity 23(2): 323-341

Mabuchi, M.; Okamoto, K.; Saito, N.; Asahina, T.; Igarashi, T. 1997: Deformation behavior and strengthening mechanisms at intermediate temperatures in W-La2O3. Conference on Mechanical Properties of Interfacial Materials 237(2): 241-249

Wu, W.X.; Jin, L.; Dong, J.; Ding, W.J. 2014: Deformation behavior and texture evolution in an extruded Mg―1Gd alloy during uniaxial compression. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 593: 48-54

Hiraoka, Y.; Hanado, H.; Inoue, T. 2004: Deformation behavior at room temperature of W-80vol%Cu composite. International Journal of Refractory Metals and Hard Materials 22(2-3): 87-93

Fernandezvicente, A.; Carsi, M.; Penalba, F.; Carreno, F.; Ruano, O.A. 2003: Deformation behavior during hot torsion of an ultrahigh carbon steel containing 1.3 wt. % C. Zeitschrift für Metallkunde 94(8): 922-929

Nakagawa, T.; Umeda, T.; Murata, J.; Kamimura, Y.; Niwa, N. 1995: Deformation behavior during solidification of steels. Isij International 35(6): 723-729

Hangai, Y.; Yamaguchi, R.; Takahashi, S.; Utsunomiya, T.; Kuwazuru, O.; Yoshikawa, N. 2013: Deformation Behavior Estimation of Aluminum Foam by X-ray CT Image-based Finite Element Analysis. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science 44(4): 1880-1886

Kitazawa, K.; Morikuni, E. 1998: Deformation behavior in aluminum sheet metal stretch-expanding by CNC incremental forming process with ORIGAMI method. Keikinzoku 48(4): 163-167

Yiqun, G.A.O.; Zhongmin, W.A.N.G.; Whang, S.H. 1995: Deformation behavior in L10-type FePt compound. Mater. Sci. Eng. A Struct. Mater. Prop. Microstruct. Proces 192-93: 53-58

Youngdahl, C.J.; Weertman, J.R.; Hugo, R.C.; Kung, H.H. 2001: Deformation behavior in nanocrystalline copper. Scr. Mater 44(8-9): 1475-1478

Miura, S.; Koike, M.; Mishima, Y.; Suzuki, T. 1992: Deformation behavior in Ni3Si single-crystalized by addition of 10 at%Ti. Nippon Kinzoku Gakkaishi (1952) 56(11): 1343-1351

Pardis, N.; Ebrahimi, R. 2009: Deformation behavior in Simple Shear Extrusion (SSE) as a new severe plastic deformation technique. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 527(1-2): 355-360

Liu, S.F.; Li, M.Q.; Luo, J.; Yang, Z. 2014: Deformation behavior in the isothermal compression of Ti―5Al―5Mo―5V―1Cr―1Fe alloy. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 589: 15-22

Kaibyshev, R.; Sitdikov, O.; Mazurina, I.; Lesuer, D.R. 2002: Deformation behavior of a 2219 Al alloy. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 334(1-2): 104-113

Sundaram, P.A.; Rodriguez, D.; Santiago, S. 1994: Deformation behavior of a 70/30 alpha brass in plane stress/plane strain. Scripta Metallurgica et Materialia 30(1): 95-100

De Diegocalderon, I.; Santofimia, M.J.; Molinaaldareguia, J.M.; Monclus, M.A.; Sabirov, I. 2014: Deformation behavior of a high strength multiphase steel at macro- and micro-scales. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 611: 201-211

Wiezorek, J.M.K.; Zhang, X.D.; Godfrey, A.; Hu, D.; Loretto, M.H.; Fraser, H.L. 1998: Deformation behavior of A2-Lamellae in fully lamellar Ti-48Al-2Mn-2Nb at room temperature. Scripta Materialia 38(5): 811-817

Kaibyshev, R.; Musin, F.; Avtokratova, E.; Motohashi, Y. 2005: Deformation behavior of a modified 5083 aluminum alloy. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 392(1-2): 373-379

Kishore, R.; Ram Niwas, S.I.N.G.H.; Tapan Kumar, S.I.N.H.A.; Bagwati Prasad, K.A.S.H.Y.A.P. 1998: Deformation behavior of a modified 9Cr-1Mo steel between 77 and 373 K. Zeitschrift für Metallkunde 89(9): 629-634

Bhattacharya, B.; Ray, R.K. 2000: Deformation behavior of a Ni3Al(B, Zr) alloy during cold rolling : Part I. Changes in order and structure. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science 31(12): 3001-3010

Bhattacharya, B.; Ray, R.K. 2000: Deformation behavior of a Ni3Al(B, Zr) alloy during cold rolling : Part II. Microstructural and textural changes. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science 31(12): 3011-3021

Raj, S.V.; Locci, I.E.; Noebe, R.D. 1992: Deformation behavior of a Ni-30Al-20Fe-0.05Zr intermetallic alloy in the temperature range 300 to 1300 K. Metallurgical Transactions. A, Physical Metallurgy and Materials Science 23(6): 1705-1718

Bae, D.H.; Lee, M.H.; Yi, S.; Kim, D.H.; Sordelet, D.J. 2004: Deformation behavior of a Ni59Zr20Ti16Si2Sn3 metallic glass matrix composite reinforced by copper synthesized by warm extrusion of powders. Journal of Non-Crystalline Solids 337(1): 15-20

Tong, G.Q.; Chan, K.C. 1999: Deformation behavior of a PM A16013/15SiCP composite sheet at elevated temperature. Materials Letters (General Ed.) 38(5): 326-330

Stribeck, N.; Fakirov, S.; Sapoundjieva, D. 1999: Deformation behavior of a poly(ether ester) copolymer. Quantitative analysis of SAXS fiber patterns. Macromolecules 32(10): 3368-3378

Ulas, I. 1999: Deformation behavior of a polyvinyl chloride (PVC) tube by mandrel drawing. Polymer Engineering and Science 39(9): 1710-1716

Hariprasad, S.; Sastry, S.M.L.; Jerina, K.L. 1996: Deformation behavior of a rapidly solidified fine grained Al-8.5%Fe-1.2%V-1.7%Si alloy. Acta Materialia 44(1): 383-389

Ha, Y.H.; Thomas, E.L. 2002: Deformation behavior of a roll-cast layered-silicate/lamellar triblock copolymer nanocomposite. Macromolecules 35(11): 4419-4428

Kang, H.; Bae, D.H. 2013: Deformation behavior of a statically recrystallized Mg―Zn―MM alloy sheet. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 582: 203-210

Furushiro, N.; Yamasaki, H.; Hori, S. 1987: Deformation behavior of a superplastic Zn-Al eutectoid in tensile tests of constant strain rate. Trans. Iron Steel Inst. Jpn 27(6): 415-418

Eckert, J.; Das, J.; Kim, K.B.; Baier, F.; Loser, W.; Calin, M.; Zhang, Z.F.; Gebert, A. 2007: Deformation behavior of a Ti66Cu8Ni4.8Sn7.2Nb14 nanostructured composite containing ductile dendrites. J. Alloys Compd 434-35: 13-17

Tomita, Y.; Takahashi, T. 1992: Deformation behavior of a viscoelastic fluid jet. Jsme International Journal. Series 2, Fluids Engineering, Heat Transfer, Power, Combustion, Thermophysical Properties 35(1): 10-15

Antoniou, A.; Bastawros, A.F.; Lo, C.C.H.; Biner, S.B. 2005: Deformation behavior of a zirconium based metallic glass during cylindrical indentation : in situ observations. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 394(1-2): 96-102

Babu Rao, J.; Kamaluddin, S.; Appa Rao, J.; Sarcar, M.M.M.; Bhargava, N.R.M.R. 2009: Deformation behavior of Al-4Cu-2Mg alloy during cold upset forging. Journal of Alloys and Compounds 471(1-2): 128-136

Tian, B.H.; Zhang, Y.G.; Chen, C.Q. 1998: Deformation behavior of Al-Li single crystals. Materials Letters (General Ed.) 34(3-6): 383-386

Choi, H.J.; Shin, J.H.; Min, B.H.; Bae, D.H. 2010: Deformation behavior of Al-Si alloy based nanocomposites reinforced with carbon nanotubes. Composites. Part A, Applied Science and Manufacturing 41(2): 327-329

Yoshimizu, M.; Kuwabara, T.; Sugibayashi, T.; Isono, H.; Bekki, Y.; Ohsawa, H. 2003: Deformation behavior of aluminum alloy sheets in biaxial in-plane tensile stressing. Keikinzoku 53(7): 284-289

Kuo, B.C.; Zaefferer, S.; Zisu, Z.H.A.O.; Winning, M.; Raabe, D. 2003: Deformation behavior of aluminum bicrystals. Advanced Engineering Materials 5(8): 563-566

Huh, M.Y.; Park, E.S.; Kim, H.J.; Bae, J.C. 2007: Deformation behavior of amorphous composites containing crystalline nickel in the supercooled liquid region. Rq 12 : International Conference on Rapidly Quenched and Metastable Materials 449-451: 916-919

Parthasarathy, T.A.; Taiil, M.A.H.; Matson, L.E. 1993: Deformation behavior of an Al2O3-Y3Al5O12 eutectic composite in comparison with sapphire and YAG. Journal of the American Ceramic Society 76(1): 29-32

Thakur, A.; Kashyap, B.P.; Malik, M.K. 1996: Deformation behavior of an Al-3.37 Wt Pct Li alloy. International Symposium on in Situ Reactions for Synthesis of Composites, Ceramics, and Intermetallics 27(8): 2274-2284

Irizarrylago, F.; Sundaram, P.A. 1995: Deformation behavior of an aluminum-silicon carbide metal matrix composite in plane stress/plane strain. Scripta Metallurgica et Materialia 32(6): 799-804

Yafei, H.U.; Zihui, X.I.A.; Ellyin, F. 2003: Deformation behavior of an epoxy resin subject to multiaxial loadings. Part I: Experimental investigations. Polymer Engineering and Science 43(3): 721-733

Zihui, X.I.A.; Yafei, H.U.; Ellyin, F. 2003: Deformation behavior of an epoxy resin subject to multiaxial loadings. Part II: Constitutive modeling and predictions. Polymer Engineering and Science 43(3): 734-748

Fan, G.J.; Wang, G.Y.; Choo, H.; Liaw, P.K.; Park, Y.S.; Han, B.Q.; Lavernia, E.J. 2005: Deformation behavior of an ultrafine-grained Al-Mg alloy at different strain rates. Scripta Materialia 52(9): 929-933

Dutta, A.; De, P.S.; Mishra, R.S.; Watson, T.J. 2009: Deformation behavior of an ultrafine-grained Al―Ni―Y―Co―Sc alloy. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 513-514: 239-246

Guangmin, L.U.O.; Jiansheng, W.U.; Junfei, F.A.N.; Haisheng, S.H.I.; Yijian, L.I.N.; Jingguo, Z.H.A.N.G. 2004: Deformation behavior of an ultrahigh carbon steel (UHCS-3.0Si) at elevated temperature. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 379: 302-307

Hyung Lae, K.I.M.; Won Kyu, B.A.N.G.; Young Won, C.H.A.N.G. 2011: Deformation behavior of as-rolled and strip-cast AZ31 magnesium alloy sheets. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 528(16-17): 5356-5365

Dong, W.A.N.G.; Kups, T.; Schawohl, J.; Schaaf, P. 2012: Deformation behavior of Au/Ti multilayers under indentation. Journal of Materials Science. Materials in Electronics 23(5): 1077-1082

Ehrlich, K. 1985: Deformation behavior of austenitic stainless steels after and during neutron irradiation - Umformverhalten von austenitischen nichtrostenden Staehlen nach und waehrend der Neutronenbestrahlung. 1. International Conference on Fusion Reactor Materials (Tokyo 1984) 133/134: 119-126

Fu, C.L.; Yoo, M.H. 1992: Deformation behavior of B2 type aluminides : FeAl and NiAl. Acta Metallurgica et Materialia 40(4): 703-711

Nozue, Y.; Shinohara, Y.; Ogawa, Y.; Takamizawa, T.; Sakurai, T.; Kasahara, T.; Yamaguchi, N.; Yagi, N.; Amemiya, Y. 2010: Deformation behavior of banded spherulite during drawing investigated by simultaneous microbeam SAXS―WAXS and POM measurement. Polymer (Guildford) 51(1): 222-231

Karasevskaya, O.P.; Ivasishin, O.M.; Semiatin, S.L.; Matviychuk, Y.V. 2003: Deformation behavior of beta-titanium alloys. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 354(1-2): 121-132

Han, B.Q.; Lee, Z.; Witkin, D.; Nutt, S.; Lavernia, E.J. 2005: Deformation behavior of bimodal nanostructured 5083 al alloys. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science 36(4): 957-965

Kwon, Y.A.; Daya, Z.A.; Soda, H.; Zhirui, W.A.N.G.; Mclean, A. 2004: Deformation behavior of bismuth-tin alloy wires with eutectic morphology produced by the Ohno continuous casting process. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 368(1-2): 323-331

Welsch, G.; Lee, Y.T.; Eloff, P.C.; Eylon, D.; Froes, F.H. 1983: Deformation behavior of blended elemental Ti-6Al-4V compacts - Verformungsverhalten von Ti-6Al-4V-Presslingen aus Pulvermischungen der Elemente. Metallurgical Transactions. A, Physical Metallurgy and Materials Science 14A (4): 761-769

Mizukami, H.; Hiraki, S.; Kawamoto, M.; Watanabe, T. 1999: Deformation behavior of borated 18Cr-8Ni stainless steel accompanied by eutectic structure during solidification. Tetsu-To-Hagane 85(4): 295-300

Chen, S.H.; Chan, K.C.; Xia, L. 2014: Deformation behavior of bulk metallic glass structural elements. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 606: 196-204

Licai, F.U.; Jun, Y.A.N.G.; Qinling, B.I.; Weimin, L.I.U. 2010: Deformation behavior of bulk nanocrystalline Fe88Si12 alloy. Journal of Alloys and Compounds 505(2): 456-458

Shen, J.; Balasubramanian, R.; Aidun, D.K.; Regel, L.L.; Wilcox, W.R. 1998: Deformation behavior of cadmium telluride stressed at elevated temperatures. Journal of Materials Engineering and Performance 7(4): 555-563

Miura, H.; Sakai, T.; Okonogi, M.; Yoshinaga, N. 2008: Deformation behavior of carbon steel with dispersed fine voids at elevated temperatures. Meeting of the International Conference on the Strength of Materials 483-484: 590-593

Watakabe, S.; Takeda, K.; Suginobe, H.; Itaya, H. 1998: Deformation behavior of coke cake during discharge. Tetsu-To-Hagane 84(3): 165-170

Ko, S.; Hong, S.I.; Kim, K.T.; Jeong, Y.H. 2011: Deformation behavior of cold-rolled and annealed Zr―1.5Nb and Zr―1.5Nb-S alloys. J. Nucl. Mater 414(2): 138-144

Selvakumar, N.; Narayanasamy, R. 2005: Deformation behavior of cold upset forming of sintered Al-Fe composite preforms. Journal of Engineering Materials and Technology 127(2): 251-256

Yoon, D.J.; Lee, S.; Lim, S.J.; Kim, E.Z. 2010: Deformation behavior of commercial Mg-Al-Zn-Mn type alloys under a hydrostatic extrusion process at elevated temperature. J. Mech. Sci. Technol 24(1): 131-135

Lin, Y.; Munroe, P.R. 2009: Deformation behavior of complex carbon nitride and metal nitride based bi-layer coatings. International Conference on Technological Advances of Thin Films and Surface Coatings 4 517(17): 4862-4866

Titov, D.L.; Pershin, S.A.; Knunyants, M.I.; Kryuchkov, A.N. 1994: Deformation behavior of composite material based on low-density poyethylene and powdered vulcanized rubbers. Polymer Science 36(8): 1121-1124

Ascher, D.; Lerch, T.; Wellner, F. 2007: Deformation behavior of concrete block pavements under vertical and horizontal dynamic load - Verformungsverhalten von Betonpflasterbefestigungen unter vertikaler und horizontaler dynamischer Lasteintragung. Betonwerk und Fertigteil-Technik 73(1): 16-22

Ogibayashi, S.; Nishihara, R.; Satoh, S. 1997: Deformation behavior of continuously cast strand during soft reduction. Tetsu-To-Hagane 83(1): 36-41

Hayashi, K.; Hasegawa, M.; Kondo, H.; Okamoto, Y.; Ueno, K.; Seno, H.; Inada, I. 1999: Deformation behavior of cordierite ceramics obtained by densification/crystallization of glass compacts at high temperatures. Nippon Seramikkusu Kyokai Gakujutsu Ronbunshi 107(2): 134-139

Tamura, H.; Nishimura, A.; Imagawa, S.; Mito, T.; Maekawa, R.; Yanagi, N.; Takahata, K.; Satow, T.; Satoh, S.; Motojima, O. 2000: Deformation behavior of cryogenic components in LHD during cooling down. Adv. Cryog. Eng 45: 753-760

Deng, X.; Chawla, N.; Chawla, K.K.; Koopman, M. 2004: Deformation behavior of (Cu, Ag)-Sn intermetallics by nanoindentation. Acta Materialia 52(14): 4291-4303

Islamgaliev, R.K.; Buchgraber, W.; Kolobov, Y.R.; Amirkhanov, N.M.; Sergueeva, A.V.; Ivanov, K.V.; Grabovetskaya, G.P. 2001: Deformation behavior of Cu-based nanocomposite processed by severe plastic deformation. Icsma-12: International Conference on the Strength of Materials 319/21: 872-876

Bartels, A.; Kestler, H.; Clemens, H. 2002: Deformation behavior of differently processed γ-titanium aluminides. Mater. Sci. Eng. A Struct. Mater. Prop. Microstruct. Proces 329-31: 153-162

Reinikainen, T.; Kivilahti, J. 1999: Deformation behavior of dilute SnBi(0.5 to 6 At. Pct) solid solutions. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science 30(1): 123-132

Stumvoll, M.; Swoboda, G. 1993: Deformation behavior of ductile solids containing anisotropic damage. Journal of Engineering Mechanics 119(7): 1331-1352

Inai, R.; Kotaki, M.; Ramakrishna, S. 2005: Deformation behavior of electrospun poly(L-lactide-co-ε-caprolactone) nonwoven membranes under uniaxial tensile loading. Journal of Polymer Science. Part B. Polymer Physics 43(22): 3205-3212

Zhang, G.P.; Yongdong, L.I.U.; Bin, Z.H.A.N.G. 2005: Deformation behavior of free-standing Pd-based thin film metallic glass for micro electro mechanical systems applications. Advanced Engineering Materials 7(7): 606-609

Yunmin, Y.A.N.G.; Sekimura, N.; Abe, H. 2004: Deformation behavior of glissile interstitial clusters: An atomistic study. Journal of the Physical Society of Japan 73(4): 932-942

Schwarz, M.C.; Keskkula, H.; Barlow, J.W.; Paul, D.R. 1988: Deformation behavior of HDPE/(PEC/PS)/SEBS blends. Journal of Applied Polymer Science 35(3): 653-677

Sawada, K.; Abe, F.; Kimura, K. 2004: Deformation behavior of high Cr ferritic steel upon abrupt stress loading. Icsma 13 International Conference on the Strength of Materials 387-389: 683-686

Rogal, L.; Dutkiewicz, J. 2014: Deformation behavior of high strength X210CrW12 steel after semi-solid processing. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 603: 93-97

Liang, C.H.E.N.G.; Xiangyi, X.U.E.; Bin, T.A.N.G.; Degui, L.I.U.; Jizhen, L.I.; Hongchao, K.O.U.; Jinshan, L.I. 2014: Deformation behavior of hot-rolled IN718 superalloy under plane strain compression at elevated temperature. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 606: 24-30

Ravichandran, K.S. 1994: Deformation behavior of interpenetrating-phase composites. Composites Science and Technology 52(4): 541-549

Zia, Q.; Radusch, H.J.; Androsch, R. 2009: Deformation behavior of isotactic polypropylene crystallized via a mesophase. Polymer Bulletin (Berlin. Print) 63(5): 755-771

Nozue, Y.; Shinohara, Y.; Ogawa, Y.; Sakurai, T.; Hori, H.; Kasahara, T.; Yamaguchi, N.; Yagi, N.; Amemiya, Y. 2007: Deformation behavior of isotactic polypropylene spherulite during hot drawing investigated by simultaneous microbeam SAXS-WAXS and POM measurement. Macromolecules 40(6): 2036-2045

Agarwal, A.; Dahotre, N.B. 2001: Deformation behavior of laser surface engineered titanium boride coating under uniaxial tensile stress. Journal of Advanced Materials 33(3): 37-41

Choi, I.D.; Bruce, D.M.; Kim, S.J.; Lee, C.G.; Park, S.H.; Matlock, D.K.; Speer, J.G. 2002: Deformation behavior of low carbon TRIP sheet steels at high strain rates. Isij International 42(12): 1483-1489

Choi, H.J.; Kim, Y.; Shin, J.H.; Bae, D.H. 2010: Deformation behavior of magnesium in the grain size spectrum from nano- to micrometer. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 527(6): 1565-1570

Kitahara, H.; Maruno, F.; Tsushida, M.; Ando, S. 2014: Deformation behavior of Mg single crystals during a single ECAP pass at room temperature. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 590: 274-280

Fu, X.L.; Tan, M.J.; Wang, Y.S.; Jarfors, A.E.W.; Gupta, M. 2013: Deformation behavior of Mg67Zn28Ca5 metallic glass at near supercooled liquid region. Journal of Alloys and Compounds 549: 100-104

Yong, L.I.U.; Guangyin, Y.U.A.N.; Wenjiang, D.I.N.G.; Cheng, L.U. 2007: Deformation behavior of Mg-Zn-Gd-based alloys reinforced with quasicrystal and Laves phases at elevated temperatures. Journal of Alloys and Compounds 427(1-2): 160-165

Yoshimi, K.; Yoo, M.H.; Wereszczak, A.A.; Borowicz, S.M.; George, E.P.; Miura, E.; Hanada, S. 2002: Deformation behavior of Mo5Si3 single crystal at high temperatures. Mater. Sci. Eng. A Struct. Mater. Prop. Microstruct. Proces 329-31: 228-234

Brink, D.D.; Mailand, J.C.; Levi, C.G.; Leckie, F.A. 2000: Deformation behavior of model MMC scarf joints. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 281(1-2): 113-125

Tang, F.; Okuda, S. 1996: Deformation behavior of nanocrystalline gold film prepared by gas deposition method. Materials Transactions - Jim 37(12): 1813-1814

Romasco, A.L.; Friedman, L.H.; Fang, L.; Meirom, R.A.; Clark, T.E.; Polcawich, R.G.; Pulskamp, J.S.; Dubey, M.; Muhlstein, C.L. 2010: Deformation behavior of nanograined platinum films. Thin Solid Films 518(14): 3866-3874

Islamgaliev, R.K.; Yunusova, N.F.; Sabirov, I.N.; Sergueeva, A.V.; Valiev, R.Z. 2001: Deformation behavior of nanostructured aluminum alloy processed by severe plastic deformation. Icsma-12: International Conference on the Strength of Materials 319/21: 877-881

Misra, A.; Kung, A.H. 2001: Deformation behavior of nanostructured metallic multilayers. Advanced Engineering Materials 3(4): 217-222

Zabels, R.; Muktepavela, F.; Grigorjeva, L. 2012: Deformation behavior of nanostructured ZnO films on glass. Thin Solid Films 520(14): 4685-4688

Chen, J.; Ke, H.A.N.; Kalu, P.N.; Markiewicz, W.D. 2005: Deformation behavior of Nb3Sn type superconductors. Ieee Trans. Appl. Supercond 15(2): 3568-3571

Wang, W.; Jiang, C.B.; Lu, K. 2003: Deformation behavior of Ni3Al single crystals during nanoindentation. Acta Materialia 51(20): 6169-6180

Lach, E.; Bohmann, A.; Scharf, M.; Werner, E. 2000: Deformation behavior of nitrogen-alloyed austenitic steels at high strain rates. Advanced Engineering Materials 2(11): 750-752

Ito, M.; Morishita, Y.; Mizuochi, K.; Kanamoto, T. 1997: Deformation behavior of nylon 6 solution-grown crystals. Journal of Macromolecular Science. Physics 36(3): 367-380

Kaya, A.C.; Fleck, C. 2014: Deformation behavior of open-cell stainless steel foams. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 615: 447-456

Tawancy, H.M. 1995: Deformation behavior of ordered Ni-Mo and Ni-Mo-Cr alloys. Scripta Metallurgica et Materialia 32(12): 2055-2060

Govaert, L.E.; Lemstra, P.J. 1992: Deformation behavior of oriented UHMW-PE fibers. Colloid and Polymer Science 270(5): 455-464

Xing, L.Q.; Bertrand, C.; Dallas, J.P.; Cornet, M. 1998: Deformation behavior of partially crystallized Zr57Ti5Al10Cu20Ni8 bulk amorphous alloy. Materials Letters (General Ed.) 34(1-2): 90-94

Stribeck, N.; Fakirov, S.; Apostolov, A.A.; Denchev, Z.; Gehrke, R. 2003: Deformation behavior of PET, PBT and PBT-based thermoplastic elastomers as revealed by SAXS from synchrotron. Macromolecular Chemistry and Physics 204(7): 1000-1013

Li, Z.; Cao, L.F.; Guo, M.X.; Tang, N.; Fang, M.; Liu, N. 2005: Deformation behavior of β1 phase in polycrystalline CuAlMnZnZr shape memory alloy with wide transformation hysteresis. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 403(1-2): 227-233

Duerr, D.; Pincus, G. 1988: Deformation behavior of pinned connections with large pin clearance - Déformation des assemblages goujonnés avec un jeu important entre le trou et le goujon. Journal of Structural Engineering (New York) 114(12): 2803-2807

Abusamra, M.A.; Ahmad, M.S.; Zihlif, A.M. 1984: Deformation behavior of plasticized poly(vinyl chloride) membranes with barium content. Polym. Eng. Sci 24(11): 936-940

Venkatraman, S. 1993: Deformation behavior of poly(dimethyl siloxane) networks. I: Applicability of various theories to modulus prediction. Journal of Applied Polymer Science 48(8): 1383-1393

Stribeck, N.; Sapoundjieva, D.; Denchev, Z.; Apostolov, A.A.; Zachmann, H.G.; Stamm, M.; Fakirov, S. 1997: Deformation behavior of poly(ether ester) copolymer as revealed by small- and wide-angle scattering of X-ray radiation from synchrotron. Macromolecules 30(5): 1329-1339

Saini, D.R.; Shenoy, A.V. 1986: Deformation behavior of poly(vinylidene fluoride). Industrial and Engineering Chemistry Product Research and Development 25(2): 277-282

Hailin, H.U.; Saniger, J.M.; Castano, V.M. 1993: Deformation behavior of polyacrylic acid-metal oxide composites in water. Materials Letters (General Ed.) 16(4): 200-205

Cheng, L.M.; Nolting, A.E.; Voyzelle, B.; Galvani, C. 2007: Deformation behavior of polycrystalline Galfenol at elevated temperatures. Proc. Spie Int. Soc. Opt. Eng: 65262N.1-65262N.9

Ki Hyun, W.A.N.G.; In Jae, C.H.U.N.G.; Min Cheol, J.A.N.G.; Jong Kahk, K.E.U.M.; Hyun Hoon, S.O.N.G. 2002: Deformation behavior of polyethylene/silicate nanocomposites as studied by real-time wide-angle X-ray scattering. Macromolecules 35(14): 5529-5535

Rosch, J.; Mulhaupt, R. 1995: Deformation behavior of polypropylene/polyamide blends. Journal of Applied Polymer Science 56(12): 1607-1613

Yamaguchi, K.; Takachi, M.; Hirakawa, S. 1994: Deformation behavior of polytetrafluoroethylene films under tensile stress at various temperatures. Journal of Applied Polymer Science 54(11): 1625-1630

Kim, W.J.; Yeon, J.H.; Shin, D.H.; Hong, S.H. 1999: Deformation behavior of powder-metallurgy processed high-strain-rate superplastic 20%SiCp/2124 Al composite in a wide range of temperature. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 269(1-2): 142-151

Takagi, M.; Imura, T.; Kawamura, Y.; Inoue, A. 2002: Deformation behavior of Pt-based metallic glass at elevated temperatures : Superplasticity and its applications. Materials Transactions - Jim 43(10): 2463-2467

Wong, M.F.; Zeng, K. 2008: Deformation behavior of PZN-6%PT single crystal during nanoindentation. Philosophical Magazine (2003. Print) 88(26): 3105-3128

Shiba, K.; Hirose, T. 2006: Deformation behavior of reduced activation ferritic steel during tensile test. International Symposium on Fusion Nuclear Technology 81(8-14): 1051-1055

Nemirovskii, Y.V.; Yankovskii, A.P. 2007: Deformation behavior of rotating disks with thin high-modulus coatings. Strength of Materials 39(3): 246-256

Lashkari, O.; Ghomashchi, R. 2008: Deformation behavior of semi-solid A356 Al-Si alloy at low shear rates : Effect of fraction solid. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 486(1-2): 333-340

Lashkari, O.; Ghomashchi, R.; Ajersch, F. 2007: Deformation behavior of semi-solid A356 Al-Si alloy at low shear rates : The effect of sample size. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 444(1-2): 198-205

Lei, S.H.I.; Jiuchun, Y.A.N.; Bo, P.E.N.G.; Yanfei, H.A.N. 2011: Deformation behavior of semi-solid Zn-Al alloy filler metal during compression. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 528(22-23): 7084-7092

Saburi, T.; Yoshida, M.; Nenno, S. 1984: Deformation behavior of shape memory Ti-Ni alloy crystals - Comportement à la déformation des alliages cristallins à mémoire mécanique Ti-Ni. Scripta Metallurgica 18(4): 363-366

Kitagawa, M.; Kimura, M. 2002: Deformation behavior of shear band under simple shear in polycarbonate. Zairyo 51(3): 261-266

Sumino, K. 1999: Deformation behavior of silicon. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science 30(6): 1465-1479

Buzzi, S.; Dietiker, M.; Kunze, K.; Spolenak, R.; Loffler, J.F. 2009: Deformation behavior of silver submicrometer-pillars prepared by nanoimprinting. Philosophical Magazine (2003. Print) 89(10): 869-884

Xin, L.O.N.G.; Dutta, I.; Sarihan, V.; Frear, D.R. 2008: Deformation Behavior of Sn-3.8Ag-0.7Cu Solder at Intermediate Strain Rates : Effect of Microstructure and Test Conditions. Journal of Electronic Materials 37(2): 189-200

Liu, C.; Li, J.M.; Liu, J.S.; Wang, L.D. 2010: Deformation behavior of solid polymer during hot embossing process. Microelectronic Engineering 87(2): 200-207

Lee, S.Y.; Wang, H.; Gharghouri, M.A.; Nayyeri, G.; Woo, W.; Shin, E.; Wu, P.D.; Poole, W.J.; Wu, W.; An, K. 2014: Deformation behavior of solid-solution-strengthened Mg-9 wt.% Al alloy: In situ neutron diffraction and elastic-viscoplastic self-consistent modeling. Acta Materialia 73: 139-148

Yongxin, D.U.A.N.; Rettler, E.; Schneider, K.; Schlegel, R.; Thunga, M.; Wddisch, R.; Siesler, H.W.; Stamm, M.; Mays, J.W.; Hadjichristidis, N. 2008: Deformation Behavior of Sphere-Forming Trifunctional Multigraft Copolymer. Macromolecules 41(13): 4565-4568

Trinh An, H.U.Y.; Adhikari, R.; Michler, G.H. 2003: Deformation behavior of styrene-block-butadiene-block-styrene triblock copolymers having different morphologies. Polymer (Guildford) 44(4): 1247-1257

Pakua, T.; Saijo, K.; Kawai, H.; Hashimoto, T. 1985: Deformation behavior of styrene-butadiene-styrene triblock copolymer with cylindrical morphology. Macromolecules 18(6): 1294-1302

Knezevic, M.; Carpenter, J.S.; Lovato, M.L.; Mccabe, R.J. 2014: Deformation behavior of the cobalt-based superalloy Haynes 25: Experimental characterization and crystal plasticity modeling. Acta Materialia 63: 162-168

Takeuchi, S.; Morikawa, M.; Yazawa, N.; Tazaki, Y. 2001: Deformation behavior of the reservoir mudstone in the Minami-Kanto gas field. Sekiyu Gijutsu Kyokaishi = Journal of the Japanese Association of Petroleum Technology 66(6): 643-651

Lu, J.; Ravichandran, G.; Johnson, W.L. 2003: Deformation behavior of the Zr41.2Ti13.8Cu12.5Ni10Be22.5 bulk metallic glass over a wide range of strain-rates and temperatures. Acta Materialia 51(12): 3429-3443

Shull, K.R.; Creton, C. 2004: Deformation behavior of thin, compliant layers under tensile loading conditions. Journal of Polymer Science. Part B. Polymer Physics 42(22): 4023-4043

Hommel, M.; Kraft, O. 2001: Deformation behavior of thin copper films on deformable substrates. Acta Materialia 49(19): 3935-3947

Stucke, M.A.; Vasudevan, V.K.; Dimiduk, D.M. 1995: Deformation behavior of [001]Ti-56Al single crystals. Mater. Sci. Eng. A Struct. Mater. Prop. Microstruct. Proces 192-93: 111-119

Kyu Seop, P.A.R.K.; Matsumura, K.; Fukutomi, H. 2002: Deformation behavior of Ti-43 mol% aluminum in a single phase region and orientation distribution of lamellae after cooling. Nippon Kinzoku Gakkaishi (1952) 66(4): 425-430

Makhlouf, K.; Ghosh, A.K.; Ray, R. 1994: Deformation behavior of γ-TiAl composites in the solid and mushy states. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 184(1): 17-25

Fuqian, Y.A.N.G.; Li, J.C.M. 2007: Deformation behavior of tin and some tin alloys. Journal of Materials Science. Materials in Electronics 18(1-3): 191-210

Tobushi, H.; Okumara, K.; Endo, M.; Tanaka, K. 2002: Deformation behavior of TiNi shape-memory alloy under strain- or stress-controlled conditions. Archives of Mechanics 54(1): 75-91

Tobushi, H.; Kimura, K.; Tanaka, K.; Hori, T.; Sawada, T. 1991: Deformation behavior of TiNi shape memory alloys (cyclic characteristics under constant temperature and constant stress). Zairyo 40(457): 1276-1282

Ogawa, K. 1996: Deformation behavior of β-titanium alloy (Ti-15V-3Cr-3Sn-3Al) at high temperatures. Zairyo 45(8): 864-870

Huang, N.; Wan, G.J.; Leng, Y.; Leng, Y.X.; Sun, H.; Yang, P.; Chen, J.Y.; Wang, J.; Chu, P.K. 2002: Deformation behavior of titanium nitride film prepared by plasma immersion ion implantation and deposition. Surf. Coat. Technol 156(1-3): 170-175

Curtze, S.; Kuokkala, V.T.; Hokka, M.; Peura, P. 2009: Deformation behavior of TRIP and DP steels in tension at different temperatures over a wide range of strain rates. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 507(1-2): 124-131

Jiang, L.; Jonas, J.J.; Boyle, K.; Martin, P. 2008: Deformation behavior of two Mg alloys during ring hoop tension testing. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 492(1-2): 68-73

Yang, Q.; Ghosh, A.K. 2006: Deformation behavior of ultrafine-grain (UFG) AZ31B Mg alloy at room temperature. Acta Materialia 54(19): 5159-5170

Guruswamy, S.; Rai, R.S.; Faber, K.T.; Hirth, J.P. 1987: Deformation behavior of undoped and In-doped GaAs in the temperature range 700-1100 °C. Journal of Applied Physics 62(10): 4130-4134

Slagle, O.D. 1984: Deformation behavior of UO2 above 2000°C. Journal of the American Ceramic Society 67(3): 169-174

Semiatin, S.L.; Fagin, P.N.; Glavicic, M.G.; Raabe, D. 2004: Deformation behavior of Waspaloy at hot-working temperatures. Scripta Materialia 50(5): 625-629

Weidisch, R.; Schreyeck, G.; Ensslen, M.; Michler, G.H.; Stamm, M.; Schubert, D.W.; Budde, H.; Horing, S.; Arnold, M.; Jerome, R. 2000: Deformation behavior of weakly segregated block copolymers. 2. Correlation between phase behavior and deformation mechanisms of diblock copolymers. Macromolecules 33(15): 5495-5504

Weidisch, R.; Ensslen, M.; Michler, G.H.; Fischer, H. 1999: Deformation behavior of weakly segregated block copolymers. 1. Influence of morphology of poly(styrene-b-butyl methacrylate) diblock copolymers. Macromolecules 32(16): 5375-5382

Gogotsi, G.A. 1998: Deformation behavior of zirconias. Strength of Materials 30(6): 638-644

Tewari, R.; Dey, G.K.; Fotedar, R.K.; Kutty, T.R.G.; Prabhu, N. 2004: Deformation behavior of Zr3Al-Nb alloys I: Room-temperature and high-temperature deformation study. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science 35(1): 189-203

Tewari, R.; Dey, G.K.; Kutty, T.R.G.; Sengupta, A.K.; Prabhu, N.; Banerjee, S. 2004: Deformation behavior of Zr3Al-Nb alloys II: Indentation creep studies. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science 35(1): 205-216

Nakai, K.; Okamoto, T.; Ohtsubo, H. 2004: Deformation behaviors around/at the interface between Zn-electrodeposition and Fe-substrate. Isij International 44(5): 914-918

Liu, L.H.; Meng, X.L.; Cai, W.; Zhao, L.C. 2003: Deformation behaviors at various temperatures and corresponding microscturcures of Ti36Ni49Hf15 alloy. J. Phys., Iv 112: 755-758

Atroshenko, S.A.; Morozov, N.F.; Zheng, W.; Huang, Y.J.; Sudenkov, Y.V.; Naumova, N.S.; Shen, J. 2010: Deformation behaviors of a TiZrNiCuBe bulk metallic glass under shock loading. Journal of Alloys and Compounds 505(2): 501-504

Wang, G.; Chen, D.M.; Shen, J.; Stachurski, Z.H.; Qin, Q.H.; Sun, J.F.; Zhou, B.D. 2006: Deformation behaviors of a tungsten-wire/bulk metallic glass matrix composite in a wide strain rate range. Journal of Non-Crystalline Solids 352(36-37): 3872-3878

Sakaguchi, N.; Tsunekawa, M.; Watanabe, Y. 2011: Deformation behaviors of Al―4.5 mass% alloy in semi solid state. Keikinzoku 61(2): 66-71

Muller, G.; Rupp, R.; Volkl, J.; Wolf, H.; Blum, W. 1985: Deformation behaviour and dislocation formation in undoped and doped (Zn, S)InP crystals. Journal of Crystal Growth 71(3): 771-781

Yan, X.U.; Lianxi, H.U.; Yu, S.U.N. 2013: Deformation behaviour and dynamic recrystallization of AZ61 magnesium alloy. Journal of Alloys and Compounds 580: 262-269

Boulahia, R.; Gloaguen, J.M.; Zairi, F.; Naitabdelaziz, M.; Seguela, R.; Boukharouba, T.; Lefebvre, J.M. 2009: Deformation behaviour and mechanical properties of polypropylene processed by equal channel angular extrusion: Effects of back-pressure and extrusion velocity. Polymer (Guildford) 50(23): 5508-5517

Walther, F.; Eifler, D.; Mosler, U.; Martin, U. 2005: Deformation behaviour and microscopic investigations of cyclically loaded railway wheels and tyres. Zeitschrift für Metallkunde 96(7): 753-760

Schindler, I.; Cizek, L.; Cerny, L.; Dobrzanski, L.A.; Kozelsky, P.; Rusz, S.; Kubina, T.; Suchanek, P.; Marek, M.; Boruta, J.; Svinc, V. 2007: Deformation behaviour and microstructure development of a high-carbon steel during its hot and cold processing. International Journal of Microstructure and Materials Properties 2(2): 224-237

Kato, M.; Katsuta, S.; Okamine, S.; Sato, A. 1986: Deformation behaviour and microstructure of Cu-10Ni-6Sn spinodal alloy single crystals - Verformungsverhalten und Gefuege von Einkristallen aus der spinodalen Legierung Cu-10Ni-6Sn. Materials Science and Engineering 77(1-2): 95-102

Prader, P.; Kneissl, A.C. 1997: Deformation behaviour and two-way shape memory effect of NiTi alloys. Zeitschrift für Metallkunde 88(5): 410-415

Lexcellent, C.; Moyne, S.; Ishida, A.; Miyazaki, S. 1998: Deformation behaviour associated with the stress-induced martensitic transformation in Ti-Ni thin films and their thermodynamical modelling. Thin Solid Films 324(1-2): 184-189

Hammouda, M.M.I.; Ahmad, S.S.E.; Sherbini, A.S.; Sallam, H.E.M. 1999: Deformation behaviour at the tip of a physically short fatigue crack due to a single overload. Fatigue and Fracture of Engineering Materials and Structures 22(2): 145-151

Hernandez, J.J.; Garciagutierrez, M.C.; Nogales, A.; Rueda, D.R.; Sanz, A.; Sics, I.; Hsiao, B.S.; Roslaniec, Z.; Broza, G.; Ezquerra, T.A. 2007: Deformation behaviour during cold drawing of nanocomposites based on single wall carbon nanotubes and poly(ether ester) copolymers. Polymer (Guildford) 48(11): 3286-3293

Kayali, E.S.; Elsayed, M.; Funke, P. 1990: Deformation behaviour during drawing of copper rods produced using various processes. Materials Science and Technology 6(9): 872-883

Sandstrom, R.; Osterberg, J.O.; Nylen, M. 1993: Deformation behaviour during low cycle fatigue testing of 60Sn-40Pb solder. Materials Science and Technology 9(9): 811-819

Miura, S.; Mishima, Y.; Suzuki, T. 1992: Deformation behaviour in Ni3Al single cristals containing NB-subgroup element Si. Nippon Kinzoku Gakkaishi (1952) 56(10): 1200-1206

Miura, S.; Mishima, Y.; Suzuki, T. 1992: Deformation behaviour in Ni3Al single crystals containing Cr being substituted for bath Al- and Ni-sites. Nippon Kinzoku Gakkaishi (1952) 56(10): 1214-1220

Miura, S.; Koike, M.; Wang, K.; Mishima, Y.; Suzuki, T. 1992: Deformation behaviour in Ni3Ge single cristals containing 76 at %Ni. Nippon Kinzoku Gakkaishi (1952) 56(10): 1207-1213

Saidettaoussi, M.; Jimenezsaez, J.C.; Perezmartin, A.M.C.; Jimenezrodriguez, J.J. 2004: Deformation behaviour induced by point defects near a Cu(0 0 1) surface. Aphys-2003 International Meeting on Applied Physics 238(1-4): 249-253

Topic, I.; Hoppel, H.W.; Goken, M. 2007: Deformation behaviour, microstructure and processing of accumulative roll bonded aluminium alloy AA6016. International Journal of Materials Research 98(4): 320-324

Krumphals, F.; Reggiani, B.; Donati, L.; Wlanis, T.; Sommitsch, C. 2012: Deformation behaviour of a ferritic hot-work tool steel with respect to the microstructure. Iwcmm International Workshop on Computational Mechanics of Materials 52(1): 40-45

Mizukoshi, T.; Mimaki, Y. 1985: Deformation behaviour of a large underground cavern - Comportement de déformation d'une importante grotte souterraine. Rock Mechanics 18(4): 227-251

Darsouni, A.; Bouzabata, B.; Montheillet, F. 1997: Deformation behaviour of a microalloyed steel. Ann. Chim. (Paris, 1914) 22(3-4): 127-131

Das, J.; Appa Rao, G.; Pabi, S.K.; Sankaranarayana, M.; Sarma, B. 2011: Deformation behaviour of a newer tungsten heavy alloy. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 528(19-20): 6235-6247

Gopala Krishna, M.S.; Vikas, K.U.M.A.R.; Chhaunker, P.S. 1994: Deformation behaviour of a nickel-chromium free austenitic steel. Scripta Metallurgica et Materialia 30(2): 219-222

Hungjue, S.U.E.; Yee, A.F. 1988: Deformation behaviour of a polycarbonate plate with a circular hole: finite elements model and experimental observations. Polymer (Guildford) 29(9): 1619-1624

Moverare, J.J.; Oden, M. 2002: Deformation behaviour of a prestrained duplex stainless steel. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 337(1-2): 25-38

Mukhopadhyay, J.; Rao, A.M.; Mallik, A.K. 1985: Deformation behaviour of Al-Mg alloy - Comportement à la déformation dans un alliage Al-Mg. Transactions of the Indian Institute of Metals 38(5): 389-394

Rao, K.P.; Doraivelu, S.M.; Prasad, Y.V.R.K. 1985: Deformation behaviour of Al-5% Si alloy at high temperatures and different strain rates - Comportement à la déformation de l'alliage Al-5% Si à haute température pour différentes vitesses de déformation. Transactions of the Japan Institute of Metals 26(6): 390-396

Grant, B.M.B.; Francis, E.M.; Da Fonseca, J.Q.; Daymond, M.R.; Preuss, M. 2012: Deformation behaviour of an advanced nickel-based superalloy studied by neutron diffraction and electron microscopy. Acta Materialia 60(19): 6829-6841

Trojanova, Z.; Kral, R.; Chatey, A. 2007: Deformation behaviour of an AJ50 magnesium alloy at elevated temperatures. International Symposium on Physics of Materials 462(1-2): 202-205

Eddahbi, M.; Ruano, O.A. 2005: Deformation behaviour of an Al-6%Cu-0.4%Zr superplastic alloy containing a gradient of texture. Journal of Alloys and Compounds 403(1-2): 176-185

Ehrlich, K. 1985: Deformation behaviour of austenitic stainless steels after and during neutron irradiation. Journal of Nuclear Materials 133-134: 119-126

Joensson, S. 1984: Deformation behaviour of beryllium under compression parallel to the basal plane - Verformungsverhalten von Beryllium unter Druck parallel zur Basisebene. Zeitschrift für Metallkunde 75(7): 523-528

Balasubrahmanyam, V.V.; Prasad, Y.V.R.K. 2002: Deformation behaviour of beta titanium alloy Ti-10V-4.5Fe-1.5Al in hot upset forging. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 336(1-2): 150-158

Balasundar, I.; Raghu, T. 2010: Deformation behaviour of bulk materials during repetitive upsetting-extrusion (RUE). International Journal of Material Forming 3(4): 267-278

Gogotsi, G.A. 1991: Deformation behaviour of ceramics. Journal of the European Ceramic Society 7(2): 87-92

Motz, C.; Pippan, R. 2001: Deformation behaviour of closed-cell aluminium foams in tension. Acta Materialia 49(13): 2463-2470

Nortmann, A.; Neuhauser, H. 1998: Deformation behaviour of copper based solid solutions at elevated temperatures. Physica Status Solidi. A. Applied Research 168(1): 87-107

Arikan, M.M.; Kayali, E.S.; Cimenoglu, H. 1994: Deformation behaviour of copper xoide inclusions during wire drawing. Scandinavian Journal of Metallurgy 23(5-6): 190-193

Nordgren, A.; Melander, A. 1989: Deformation behaviour of different types of inclusion during chip formation in turning of quenched and tempered steels - Déformation de différents types d'inclusions au cours de la formation du copeau dans le tournage des aciers trempés et revenus. Materials Science and Technology 5(9): 940-951

Haq, A.J.; Munroe, P.R.; Hoffman, M.; Martin, P.J.; Bendavid, A. 2007: Deformation behaviour of DLC coatings on (111) silicon substrates. Icmctf 2007 International Conference on Metallurgical Coatings and Thin Films 516(2-4): 267-271

Duprez, L.; De Cooman, B.C.; Akdut, N. 2002: Deformation behaviour of duplex stainless steel during industrial hot rolling. Steel Research 73(12): 531-538

Bayraktar, E.; Bessri, K.; Bathias, C. 2008: Deformation behaviour of elastomeric matrix composites under static loading conditions. Eng. Fract. Mech 75(9): 2695-2706

Glass, H.J.; Bloem, A.C.W.; Blomer, F. 1996: Deformation behaviour of green sanitaryware products. Cfi. Ceramic Forum International 73(9): 533-538

Szczepanik, S.; Lehnert, W.; Fischer, O. 2000: Deformation behaviour of hot drop-forged powder metallurgical Al-Si-based materials. Aluminium (Dusseldorf) 76(9): 738-742

Raman, V.V.; Prasad, G.E.; Das Gupta, P. 1987: Deformation behaviour of Inconel 625 at various temperatures - Comportement à la déformation de l'Inconel 625 à différentes températures. Transactions of the Indian Institute of Metals 40(2): 113-120

Bataille, A.; Addad, A.; Crampon, J.; Duclos, R. 2005: Deformation behaviour of iron-doped alumina. Journal of the European Ceramic Society 25(6): 857-862

Herrmann, J.; Inden, G.; Sauthoff, G. 2003: Deformation behaviour of iron-rich iron-aluminium alloys at high temperatures. Acta Materialia 51(11): 3233-3242

Herrmann, J.; Inden, G.; Sauthoff, G. 2004: Deformation behaviour of iron-rich iron-aluminium alloys with ternary transition metal additions. Steel Research International 75(5): 339-342

Herrmann, J.; Inden G, I.N.D.E.N. G.; Sauthoff, G. 2003: Deformation behaviour of iron-rich iron-aluminum alloys at low temperatures. Acta Materialia 51(10): 2847-2857

Vlattas, C.; Galiotis, C. 1994: Deformation behaviour of liquid crystal polymer fibres. I: Converting spectroscopic data into mechanical stress-strain curves in tension and compression. Polymer (Guildford) 35(11): 2335-2347

Drozd, Z.; Trojanova, Z.; Kudela, S. 2004: Deformation behaviour of Mg-Li-Al alloys. J. Alloys Compd 378: 192-195

Gartnerova, V.; Trojanova, Z.; Jager, A.; Palcek, P. 2004: Deformation behaviour of Mg-0.7 wt.% Nd alloy. J. Alloys Compd 378: 180-183

Mallick, A.; Khin, S.A.N.D.A.R.T.U.N.; Gupta, M. 2012: Deformation behaviour of Mg/Y2O3 nanocomposite at elevated temperatures. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 551: 222-230

Grundmann, U.; Gerner, M.; Heilmaier, M.; Martin, U.; Schultz, L.; Oettel, H. 1997: Deformation behaviour of oxide-dispersion-strengthened silver. Icsma 11: International Conference on the Strength of Materials 234-236: 505-508

Fakirov, S.; Fakirov, C.; Fischer, E.W.; Stamm, M. 1991: Deformation behaviour of poly(ether ester) thermoplastic elastomers as revealed by small-angle X-ray scattering. Polymer (Guildford) 32(7): 1173-1180

Fakirov, S.; Fakirov, C.; Fischer, E.W.; Stamm, M. 1992: Deformation behaviour of poly(ether ester) thermoplastic elastomers with destroyed and regenerated structure as revealed by small-angle X-ray scattering. Polymer (Guildford) 33(18): 3818-3827

Tjong, S.C.; Ke, Y.C. 1997: Deformation behaviour of poly(phenylene oxide)-high impact polystyrene blends. Plastics Rubber and Composites Processing and Applications 26(7): 318-323

Wustholz, T.; Reinhardt, H.W. 2007: Deformation behaviour of self-compacting concrete under tensile loading. Materials and Structures 40(9): 965-977

Sargand, S.M.; Hazen, G.A. 1987: Deformation behaviour of shales - Comportement à la déformation des schistes argileux. International Journal of Rock Mechanics and Mining Sciences 24(6): 365-370

Lauke, B.; Schultrich, B. 1983: Deformation behaviour of short-fibre reinforced materials with debonding interfaces. Fibre Science and Technology 19(2): 111-126

Paufler, P.; Retzlaff, U. 1989: Deformation behaviour of single crystals of GaP in uniaxial compression. Crystal Research and Technology (1979) 24(7): 701-709

Brauser, S.; Pepke, L.A.; Weber, G.; Rethmeier, M. 2010: Deformation behaviour of spot-welded high strength steels for automotive applications. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 527(26): 7099-7108

Li, P.; Wang, Z.; Petrinic, N.; Siviour, C.R. 2014: Deformation behaviour of stainless steel microlattice structures by selective laser melting. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 614: 116-121

Rys, J.; Wada, T.; Hashimoto, S.; Miura, S. 1993: Deformation behaviour of stainless steel (α-γ) two-phase bicrystals - Sposób odkształcenia bikryształow dwufazowych (α/γ) ze stali nierdzewnej. Archives of Metallurgy 38(2): 255-275

Kazantzis, A.V.; Aindow, M.; Jones, I.P. 1997: Deformation behaviour of the C15 Laves phase Cr2Nb. International Workshop on Plastic Deformation of Structural Materials at high Temperatures 233(1-2): 44-49

Auerswald, J.; Mukherji, D.; Chen, W.; Rajeshwar Prasad, W.A.H.I. 1997: Deformation behaviour of the single crystal superalloy SC16 under low cycle fatigue loading. Zeitschrift für Metallkunde 88(8): 652-658

Huang, C.; Dean, T.A.; Loretto, M.H. 1996: Deformation behaviour of Ti-25Al-10Nb-3V-1Mo (Super α2) during isothermal forging. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 208(2): 166-171

Gupta, R.K.; Pant, B.; Kumar, V.; Agarwala, V.; Sinha, P.P. 2013: Deformation behaviour of γ+α2 Ti aluminide processed through reaction synthesis. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 559: 49-67

Kyung Won, L.E.E.; Jae Sam, B.A.N.; Sun Jin, K.I.M.; Kyu Zong, C.H.O. 2006: Deformation behaviour of Ti-8Ta-3Nb during hot forging. Journal of Mechanical Science and Technology 20(1): 13-18

Raniecki, B.; Miyazaki, S.; Tanaka, K.; Dietrich, L.; Lexcellent, C. 1999: Deformation behaviour of tini shape memory alloy undergoing R-phase reorientation in torsion-tension (compression) tests. Arch. Mech 51(6): 745-784

Prasad Rao, P.; Tangri, K. 1992: Deformation behaviour of titanium aluminides at room temperature. Materials Science and Technology 8(12): 1117-1124

Belk, J.A.; Edwards, M.R.; Farrell, W.J.; Mullah, B.K. 1993: Deformation behaviour of tungsten-copper composites. Powder Metallurgy 36(4): 293-296

Yegneswaran, A.H.; Tangri, K. 1984: Deformation behaviour of two phase materials: Cu-Al system - Déformation des matériaux biphasé: le système Cu-Al. Metal Science 18(3): 161-168

Valiev, R.Z.; Kozlov, E.V.; Ivanov Yu, F.; Lian, J.; Nazarov, A.A.; Baudelet, B. 1994: Deformation behaviour of ultra-fine-grained copper. Acta Metallurgica et Materialia 42(7): 2467-2475

Chua, B.W.; Lu, L.; Lai, M.O. 2006: Deformation behaviour of ultrafine and nanosize-grained Mg alloy synthesized via mechanical alloying. Philosophical Magazine (2003. Print) 86(19): 2919-2939

Lukac, P.; Turba, K.; Malek, P.; Cieslar, M. 2009: Deformation behaviour of ultrafine-grained 7075 aluminium alloy. International Symposium on Physics of Materials 100(6): 847-850

Lukac, P.; Trojanova, Z.; Szaraz, Z.; Svoboda, M.; Ferkel, H. 2006: Deformation behaviour of ultrafine-grained magnesium with 3 vol.% graphite. Zeitschrift für Metallkunde 97(2): 344-349

Hoffmeyer, J.; Doring, R.; Seeger, T.; Vormwald, M. 2006: Deformation behaviour, short crack growth and fatigue lives under multiaxial nonproportional loading. Icbmff: International Conference on Biaxial/Multiaxial Fatigue and Fracture 28(5-6): 508-520

Del Valle, R.A.; Nunez, J.H.; Rinaldi, C.A. 1991: Deformation belt along the eastern side of the Antarctic Peninsula. Contrib. Inst. Antart. Argent (396): 1-29

Varyukhin, A.N. 2008: Deformation Boundaries of an Axisymmetric Cavity by Gas Jets. Journal of Applied Mechanics and Technical Physics 49(5): 770-775

Polizzotto, C. 1985: Deformation bounds for a class of strainhardening solids in the range of time-independent plasticity. Res Mechanica 13(1): 55-62

Cocks, A.C.F.; Leckie, F.A. 1988: Deformation bounds for cyclically loaded shell structures operating under creep conditions. J. Appl. Mech 55(3): 509-516

Mitchell, T.E.; Peralta, P.; Hirth, J.P. 1999: Deformation by a kink mechanism in high temperature materials. Acta Materialia 47(13): 3687-3694

Kishitake, K.; Era, H.; Kinoshita, H. 2001: Deformation by aging under stress in Cu-Be alloy castings. Chuzo Kogaku 73(12): 858-862

Yagi, N.; Rikukawa, A.; Mizubayashi, H.; Tanimoto, H. 2006: Deformation by grain rotations in nanocrystalline fcc-metals. Mater. Sci. Eng. A Struct. Mater. Prop. Microstruct. Proces 442(1-2): 323-327

Sittner, P.; Novak, V.; Zarubova, N. 1998: Deformation by moving interfaces from single crystal experiments to the modeling of industrial SMA. Int. J. Mech. Sci 40(2-3): 159-172

Skvortsova, Z.N. 2004: Deformation by the mechanism of dissolution-reprecipitation as a form of adsorption plasticization of natural salts. Colloid Journal (Moscow) 66(1): 1-10

Mori, T.; Suzuki, T.; Iseki, T. 1992: Deformation by the stress-induced transport of helium bubbles in silicon carbide. Journal of the American Ceramic Society 75(1): 237-239

Tianjue, Z.H.A.N.G.; Jianjun, Y.A.N.G.; Rongfan, C.H.E.N.; Sumin, W.E.I.; Junqing, Z.H.O.N.G.; Chuan, W.A.N.G. 2010: Deformation Calculation and Optimal Design of the Compact Magnet for CYCIAE-100. Ieee Trans. Appl. Supercond 20(3): 1944-1947

Turunen, M.J.; Fenander, P.T. 1983: Deformation calorimetric measurements of polycrystalline aluminium. Scandinavian Journal of Metallurgy 12(1): 45-47

Dogovsky, Y.K.; Bessonova, N.P. 1992: Deformation calorimetry of polyurethane block-copolymers. Journal of Thermal Analysis 38(5): 1233-1241

Konig, G.; Meyer, J. 1997: Deformation capacity of the concrete compression zone: Experimental investigation on eccentrically loaded test specimens - Capacité de déformation de la zone de compression du béton: Recherche expérimentale sur des éprouvettes soumises à des charges excentrées. Ceb Comite Euro International du Beton, Bulletin (239): 17-27

Takiguchi, M.; Yoshida, F. 2003: Deformation characteristics and delamination strength of adhesively bonded aluminium alloy sheet under plastic bending. Jsme International Journal. Series A, Solid Mechanics and Material Engineering 46(1): 68-75

Jha, A.K.; Kumar, S. 1986: Deformation characteristics and fracture mechanisms during the cold forging of metal powder preforms - Caractéristiques de déformation et mécanismes de rupture au cours du forgeage à froid de préformes en poudre métalliques. International Journal of Machine Tool Design and Research 26(4): 369-384

Jha, A.K.; Kumar, S. 1988: Deformation characteristics and fracturing of sintered copper powder strips during cold forging - Caractéristiques de la déformation et rupture de feuilles de poudre de cuivre frittée au cours d'un forgeage à froid. Journal of Mechanical Working Technology 16(2): 145-164

Snyder, D.; Chen, E.Y.; Chen, C.C.; Tin, S. 2013: Deformation Characteristics and Recrystallization Response of a 9310 Steel Alloy. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science 44(1): 479-493

Shabib, I.; Miller, R.E. 2009: Deformation characteristics and stress-strain response of nanotwinned copper via molecular dynamics simulation. Acta Materialia 57(15): 4364-4373

Jeong Hoon, N.O.H.; Kyung Ho, M.I.N.; Beong Bok, H.W.A.N.G. 2011: Deformation characteristics at contact interface in ring compression. Tribology International 44(9): 947-955

Myoung Ki, Y.O.O.; Hiraoka, Y.; Choi, J. 1995: Deformation characteristics at 300K of single-crystalline molybdenum sheet prepared by secondary recrystallization. Scripta Metallurgica et Materialia 33(9): 1461-1467

Chino, Y.; Kimura, K.; Mabuchi, M. 2009: Deformation characteristics at room temperature under biaxial tensile stress in textured AZ31 Mg alloy sheets. Acta Materialia 57(5): 1476-1485

Wierzbanowski, K.; Tarasiuk, J.; Bacroix, B.; Miroux, A.; Castelnau, O. 1999: Deformation characteristics important for nucleation process. Case of low-carbon steel. Archives of Metallurgy 44(2): 183-201

Muhongo, S. 1990: Deformation characteristics in the Eastern Granulite Complexes of Tanzania - Caractéristiques de la déformation dans les complexes granulitiques orientaux de Tanzanie. Colloque de Geologie Africaine 15(22): 121-125

Higashi, K.; Mukai, T.; Tanimura, S.; Inoue, A.; Masumoto, T.; Uoya, A.; Ohtera, K. 1994: Deformation characteristics of a superplastic aluminium alloy produced from amorphous powders. International Conference on Rapidly Quenched and Metastable Materials 181-182: 1064-1067

Saad, G.; Fayek, S.A.; Fawzy, A.; Solimana, H.N.; Mohammed, G. 2010: Deformation characteristics of Al-4043 alloy. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 527(4-5): 904-910

Mori, T.; Kurimoto, S. 1998: Deformation characteristics of aluminum-clad stainless steel sheet under uniaxial tension. Journal of Manufacturing Science and Engineering 120(1): 179-184

Zhang, Y.; Xue, Y.Q.; Wu, J.C.; Shi, X.Q. 2010: Deformation characteristics of aquifer sands due to groundwater pumping in the Southern Yangtze Delta, China. Iahs-Aish Publ 339: 484-490

Wyslych, P.; Mazanec, K.; Hyspecka, L. 1988: Deformation characteristics of as quenched martensite - Caractéristiques de déformation dans la martensite trempée. International Symposium on Plasticity of Metals and Alloys 4 (1987) 38(5): 530-533

Yi, L.I.U.; Rui, H.U.; Jinshan, L.I.; Hongchao, K.O.U.; Hongwei, L.I.; Hui, C.H.A.N.G.; Hengzhi, F.U. 2008: Deformation characteristics of as-received Haynes230 nickel base superalloy. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 497(1-2): 283-289

Hyer, M.W.; Jilani, A.B. 2002: Deformation characteristics of circular RAINBOW actuators. Smart Materials and Structures 11(2): 175-195

Bosia, F.; Botsis, J.; Facchini, M.; Giaccari, P. 2002: Deformation characteristics of composite laminates-Part I: speckle interferometry and embedded Bragg grating sensor measurements. Composites Science and Technology 62(1): 41-54

Bosia, F.; Gmur, T.; Botsis, J. 2002: Deformation characteristics of composite laminates-Part II: an experimental/numerical study on equivalent single-layer theories. Composites Science and Technology 62(1): 55-66

Gogotsi, G.A.; Ostrovoi, D.Y.U. 1992: Deformation characteristics of cubic single crystals of ZrO2. Refractories (New York) 33(3-4): 152-158

Blanc, M.; Di Benedetto, H.; Tiouajni, S. 2011: Deformation Characteristics of Dry Hostun Sand with Principal Stress Axes Rotation. Soils Found 51(4): 749-760

Lagos Marques, P.; Maurer, E.; Buhr Toniatti, N. 1985: Deformation characteristics of Foz do Areia concrete face rockfill dam, as revealded by a simple instrumentation system - Caractéristiques des déformations du barrage en enrochement de Foz do Areia, avec masque amont en béton, telles que données par un système simple d'auscultation. Congres International des Grands Barrages 15 (1985) 15(1): 417-450

Liu, Y.; Baker, T.N. 1995: Deformation characteristics of IMI685 titanium alloy under β isothermal forging conditions. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 197(2): 125-131

Monajati, H.; Jahazi, M.; Yue, S.; Taheri, A.K. 2005: Deformation characteristics of isothermally forged UDIMET 720 nickel-base superalloy. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science 36(4): 895-905

Seiki, T.; Gyocheol, J.E.O.N.G.; Aydan, O.; Ichikawa, Y. 1994: Deformation characteristics of kinking in rocks. Zairyo 43(494): 1451-1456

Kolpakov, A.G.; Rakin, S.I. 2004: Deformation characteristics of laminar composites under nonlinear strains. Journal of Applied Mechanics and Technical Physics 45(5): 747-755

Visser, W.; Sun, Y.; Gregory, O.; Plume, G.; Rousseau, C.E.; Ghonem, H. 2011: Deformation characteristics of low carbon steel subjected to dynamic impact loading. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 528(27): 7857-7866

Wolff, U.; Pryds, N.; Wert, J.A. 2004: Deformation characteristics of Mg60Cu30Y10 alloy at temperatures near Tg. Scripta Materialia 50(11): 1385-1388

Chun Lei, W.U.; Ming Qiu, Z.H.A.N.G.; Min Zhi, R.O.N.G.; Lehmann, B.; Friedrich, K. 2003: Deformation characteristics of nano-SiO2 filled polypropylene composites. Polymers and Polymer Composites 11(7): 559-562

Wang, G.; Kangmei, G.U.O.; Christianson, M.; Konietzky, H. 2011: Deformation characteristics of rock salt with mudstone interbeds surrounding gas and oil storage cavern. International Journal of Rock Mechanics and Mining Sciences (1997) 48(6): 871-877

Mukherjee, P.; Sarkar, A.; Barat, P.; Bandyopadhyay, S.K.; Sen, P.; Chattopadhyay, S.K.; Chatterjee, P.; Chatterjee, S.K.; Mitra, M.K. 2004: Deformation characteristics of rolled zirconium alloys: a study by X-ray diffraction line profile analysis. Acta Materialia 52(19): 5687-5696

Ochi, K.; Tsubouchi, T.; Tatsuoka, F. 1995: Deformation characteristics of sedimentary soft rock evaluated by field and laboratory tests and full-scale behaviour. Zairyo 44(502): 856-861

Korol, E.Z.; Panferov, V.M.; Pitak, N.V.; Fedoruk, R.M.; Khmelenko, T.P. 1989: Deformation characteristics of silicon carbide and chamotte refractories. Refractories (New York) 30(7-8): 403-408

Wenjun, W.A.N.G.; Bulte, R.; Bleck, W. 2006: Deformation characteristics of steel billets with liquid core. Steel Research International 77(12): 921-926

Iwasaki, H.; Masaki, Y.; Mori, T.; Higashi, K.; Tanimura, S.; Komatsubara, T. 1992: Deformation characteristics of superplastic Al-5.5Mg-2.4Si aluminium alloy. Zairyo 41(470): 1623-1629

Hariprasad, S.; Sastry, S.M.L.; Jerina, K.L. 1993: Deformation characteristics of the rapidly solidified Al-8.5 % Fe-1.2 % V-1.7 % Si alloy. Scripta Metallurgica et Materialia 29(4): 463-466

Zhang, Z.H.; Wang, F.C.; Li, S.K.; Lu, W.A.N.G. 2006: Deformation characteristics of the 93W-1-.9Ni-2.1Fe tungsten heavy alloy deformed by hydrostatic extrusion. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 435-436: 632-637

Kim, S.W.; Jeoung Han, K.I.M.; Yong Hwan, S.O.N.G.; Jae Keun, H.O.N.G.; Yong Taek, H.Y.U.N.; Yeom, J.T. 2013: Deformation characteristics of Ti―6Al―4Fe alloys with enhanced high temperature ductility. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 559: 96-100

Sheppard, T.; Norley, J. 1988: Deformation characteristics of Ti-6Al-4V - Caractéristiques de déformation de Ti-6Al-4V. Materials Science and Technology 4(10): 903-908

Chan Il, K.I.M.; Seung Han, Y.A.N.G.; Young Suk, K.I.M. 2012: Deformation characteristics of various grain boundary angles on AFM-based nanolithography using molecular dynamics. Journal of Mechanical Science and Technology 26(6): 1841-1847

Beongbok, H.W.A.N.G.; Kobayashi, S. 1990: Deformation characterization of powdered metals in compaction. International Journal of Machine Tools and Manufacture 30(2): 309-323

Weyrich, K.H.; Siems, R. 1985: Deformation charge distribution and total energy for perowskites. Zeitschrift für Physik. B, Condensed Matter 61(1): 63-68

Kondo, N.; Ohji, T.; Wakai, F. 1998: Deformation conditions of β-SiAlON to achieve large superplastic elongation. Nippon Seramikkusu Kyokai Gakujutsu Ronbunshi 106(10): 1040-1042

Lange, F.F.; Atteraas, L.; Zok, F.; Porter, J.R. 1991: Deformation consolidation of metal powders containing steel inclusions. Acta Metallurgica et Materialia 39(2): 209-219

Tamayo, J.; Garcia, R. 1996: Deformation, contact time, and phase contrast in tapping mode scanning force microscopy. Langmuir 12(18): 4430-4435

Yuchang, S.H.E.N.; Chengi, W.E.N.G. 1995: Deformation control of laminated composite plates containing piezoelectric layers under thermal loading. Journal of Thermal Stresses 18(4): 449-464

Jacques, P.; Lefebvre, F.; Lemaignan, C. 1999: Deformation-corrosion interactions for Zr alloys during I-SCC crack initiation. Part I : Chemical contributions. Journal of Nuclear Materials 264(3): 239-248

Jacques, P.; Lefebvre, F.; Lemaignan, C. 1999: Deformation-corrosion interactions for Zr alloys during I-SCC crack initiation. Part II : Localised stress and strain contributions. Journal of Nuclear Materials 264(3): 249-256

Panasyuk, V.V. 1986: Deformation criteria in fracture mechanics - Verformungskriterien der Bruchmechanik. Fiziko-Himiceskaa Mehanika Materialov 22(1): 7-17

Popov, S.I. 1984: Deformation criteria of the quality of load supporting parts. Litejnoe Proizvodstvo 1: 24-25

Dub, S.N.; Makogon, Y.N.; Pavlova, E.P.; Sidorenko, S.I. 2001: Deformation curves of Ta-silicide thin films obtained in cyclic nanoindentation experiments. Zeitschrift für Metallkunde 92(9): 1057-1060

Sadowski, T. 1991: Deformation damage theory of materials and its application to the analysis of the deformation process of square plates. Archive of Applied Mechanics (1991) 61(6-7): 449-461

Schaffer, J.; Buberl, H.; Von Wilpert, K. 2012: Deformation damages in forest topsoils—An assessment based on Level-I soil monitoring data from Baden-Württemberg (SW Germany) : Management-induced changes in soil physical properties. Journal of Plant Nutrition and Soil Science (1999) 175(1): 24-33

Bouw, I.I.; Wewers, S.; Zapponi, L. 2009: Deformation Data, Belyi Maps, and the Local Lifting Problem. Transactions of the American Mathematical Society 361(12): 6645-6659

Heredia Ortiz, M.; Patterson, E.A.; Lesniak, J.R. 2003: Deformation data from thermal marking. Strain 39(4): 149-152

Vujisic, L.; Vuckovic, D.L. 1985: Deformation density and dissociation energy of strained C-C bonds. Journal of Organic Chemistry 50(16): 3000-3002

Radaev, S.F.; Maximov, B.A.; Simonov, V.I.; Andreev, B.V.; Dyakov, V.A. 1992: Deformation density in lithium triborate, LiB3O5. Acta Crystallographica. Section B, Structural Science 48(2): 154-160

Bats, J.W.; Fuess, H.; Elerman, Y. 1986: Deformation density in magnesium sulfite hexahydrate. Acta Crystallographica. Section B, Structural Science 42(6): 552-557

Irngartinger, H.; Kallfass, D.; Prinzbach, H.; Klingler, O. 1989: Deformation density of a cis,cis-trialkyltriaziridine. Chemische Berichte 122(1): 175-178

Stanley Cameron, T.; Bakshi, P.K.; Borecka, B.; Liu, M.T.H. 1992: Deformation density of a diazirine ring in the X-ray structure of 3-[(p-nitrophenoxy)methyl]-3-chlorodiazirine. Journal of the American Chemical Society 114(5): 1889-1890

Yu, W.A.N.G.; Liao, J.H. 1989: Deformation density studies of tetramethylthiuram disulfide and tetraethylthiuram disulfide. Acta Crystallographica. Section B, Structural Science 45(1): 65-69

Yu, W.A.N.G.; Wu, S.Y.; Cheng, A.C. 1990: Deformation-density studies of thiathiophthenes. I, 2,5-Dimethyl-6a-thiathiophthene. Acta Crystallographica. Section B, Structural Science 46(6): 850-854

Yu, W.A.N.G.; Yeh, S.K.; Wu, S.Y.; Pai, C.T.; Lee, C.R.; Lin, K.J. 1991: Deformation-density studies of thithiophthenes. II, 2,4-diphenyl-6a-thiathiophthene. Acta Crystallographica. Section B, Structural Science 47(2): 298-303

Yu, W.A.N.G.; Chen, M.J.; Wu, C.H. 1988: Deformation density study of 2,4-diphenyl-6a-thiathiophthene. Acta Crystallographica. Section B, Structural Science 44(2): 179-182

Brereton, M.G.; Vilgis, T.A.; Boue, F. 1989: Deformation dependence of the χF parameter for compatible polymer blends. Macromolecules 22(10): 4051-4053

Bebenin, N.G.; Tybulewicz, A. 1991: Deformation dependences of the optical absorption coefficient of ferromagnetic semiconductors CdCr2Se4 and HgCr2Se4 near the fundamental band edge. Soviet Physics. Semiconductors 25(9): 1003-1004

Magda, J.J.; Larson, R.G.; Mackay, M.E. 1988: Deformation-dependent hydrodynamic interaction in flows of dilute polymer solutions. The Journal of Chemical Physics 89(4): 2504-2514

Baxandall, L.G.; Edwards, S.F. 1988: Deformation-dependent properties of polymer networks constructed by addition of cross-links under strain. Macromolecules 21(6): 1763-1772

Medjancev, A.N. 1977: Deformation der Tagesoberfläche über Abbauen im Donbass - Déformation de la surface du sol au-dessus d'une exploitation dans le bassin du Donets. Vortrage Zum Berg- und Huttenmannischen Tag (Beitrage des Markscheidewesens zur Rationellen Lagerstattennutzung) (Freiberg 1976) (578): 111-115

Levasov, A.A. 1995: Deformation des Flussbettes und der Auen als wichtige Faktoren der Flusslandschaftsökologie - Riverbed and alluvial floodplain deformation as important factors of river landscape ecology. Floodplain Concepts and River Restoration in Europe. International Workshop 9(3-4): 455-458

Reiss, K. 1990: Deformation des Potentialfeldes einer Punktladung durch eine kugelförmige Materialinhomogenität. Archiv für Elektrotechnik (Berlin) 74(2): 135-144

Mccammond, D.; North, P.A. 1984: Deformation design for short-fiber-reinforced themoplastics. Polymer Composites 5(1): 72-80

Collin, B.; Zavidovique, B. 1996: Deformation detection with frequency modulation. Pattern Recognition 29(8): 1385-1400

Krygowski, T.M.; Turowskatyrk, I. 1987: Deformation directions obtained from atom-atom potentials - molecular deformations in crystals. Chemical Physics Letters 138(1): 90-94

Liu Yume, N.; Zhou Jinge, N. 1986: Deformation dislocation structure and fracture in a low carbon steel - Verformungs-Versetzungsstruktur in Stahl mit geringem Kohlenstoffgehalt. Materials Science and Engineering 84(1-2): 137-145

Belin, V.; Goldgirsh, A.; Schieber, M. 1997: Deformation-dominated texturing of superconducting filament in OPIT-fabricated Bi(Pb)SCCO-2223/Ag composite tapes. Ieee Trans. Appl. Supercond 7(2): 2075-2078

Jamari, J.; Schipper, D.J. 2007: Deformation due to contact between a rough surface and a smooth ball. Wear 262(1-2): 138-145

Charsley, P.; White, J.D.M. 1987: Deformation during fatigue near surface indentations and pits in copper crystals - Die Verformung in der Naehe von Oberflaecheneindruecken und Loechern bei Kupferkristallen waehrend der Ermuedungsbeanspruchung. Materials Science and Engineering 85(1-2): 101-114

Komatsu, T.; Torres, F. 2008: Deformation during Vickers nanoindentation in highly oriented nonlinear optical Ba2TiGe2O8 crystalline layers at glass surface : Fracture and related phenomena of glasses. Nippon Seramikkusu Kyokai Gakujutsu Ronbunshi 116(8): 859-863

Huh, Y.Y.; Kim, J.S.; Nam, T.Y.; Kim, S.C. 1997: Deformation effects and recording characteristics of compact disc-recordables. Jpn. J. Appl. Phys 36(1B): 403-409

Allakhverdiev, K.R.; Mammadov, T.G.; Suleymanov, R.A.; Gasanov, N.Z. 2003: Deformation effects in electronic spectra of the layered semiconductors TlGaS2, TlGaSe2 and TlInS2. Journal of Physics. Condensed Matter 15(8): 1291-1298

Nawa, S.I. 1991: Deformation effects in one and two chiral bags studied with use of the finite element method. Progress of Theoretical Physics 86(2): 331-336

Bernath, M.; Yannouleas, C.; Broglia, R.A. 1991: Deformation effects in the optical response of small metal clusters. Physics Letters. a 156(6): 307-312

Kakazei, N.G.; Minakov, V.N.; Puchkovskaya, G.A.; Tomila, T.V. 1991: Deformation effects in the process of synthesis of silicon carbide powders. Poroskovaa Metallurgia (Kiev) (6): 69-73

Spivak, L.V.; Kats, M.Y.A.; Skryabina, N.Y.E. 1991: Deformation effects induced by the introduction of hydrogen in some transition metals. Physics of Metals and Metallography 71(6): 144-152

Lee, S.H.; Chiu, C.W.; Lin, M.F. 2010: Deformation effects on electronic structures of bilayer graphenes. Physica ( E) Low-Dimens. Syst. Nanostrut 42(4): 732-735

Advani, A.H.; Romero, R.J.; Murr, L.E.; Matlock, D.J.; Fisher, W.W.; Tarin, P.M.; Cedillo, C.M.; Maldonado, J.G.; Miller, R.L.; Trillo, E.A. 1992: Deformation effects on interfacial carbide precipitation and chromium-depletion in type 304 stainless steel. Scripta Metallurgica et Materialia 27(12): 1759-1764

Advani, A.H.; Murr, L.E.; Atteridge, D.G.; Chelakara, R.; Bruemmer, S.M. 1991: Deformation effects on intragranular carbide precipitation and transgranular chromium depletion in type 316 stainless steels. Corrosion (Houston, Tex.) 47(12): 939-947

Sakamoto, W.K.; Gonzalez, E.R.; Zimmerman, R.L.; Ruvolofilho, A. 1994: Deformation effects on ionic transport in polymeric films. Journal of Polymer Science. Part B. Polymer Physics 32(2): 333-340

Ignatov, H.; Nazarova, E.; Zahariev, A.; Lazarova, V.; Georgiev, J.; Stoyanovaivanova, A.; Terzieva, S.; Kliavkov, K.; Kovachev, V. 2008: Deformation Effects on the Structure and Properties of Y1-xCaxBa2Cu3O7-δ (x = 0 - 0.3) Tapes Produced by OPIT Method in the Ag-Tube. Journal of Superconductivity and Novel Magnetism 21(1): 69-73

Demyanov, S.E.; Drozd, A.A.; Petrov, A.V.; Petrovskii, M.L. 1997: Deformation electrical resistivity of Al-Ga dilute alloys in strong magnetic fields. Adv. Cryog. Eng 42: 1079-1085

Hermansson, K.; Thomas, J.O.; Olovsson, I. 1984: Deformation electron density of lithium nitrate trihydrate, LiNO3.3H2O, at 120 and 295K. Acta Crystallographica. Section C, Crystal Structure Communications 40(3): 335-340

Sergeev, A.; Reizer, M.Y.; Mitin, V. 2005: Deformation electron-phonon coupling in disordered semiconductors and nanostructures. Physical Review Letters 94(13): 136602.1-136602.4

Van der Werff, H.; Van Duynen, P.T.; Pennings, A.J. 1990: Deformation energetics of chain defects of polyethylene. Macromolecules 23(11): 2935-2940

Narita, K.; Komatsu, T. 2004: Deformation energies and mechanism during Vickers nanoindentation in lanthanum ultra- and metaphosphate glasses. Journal of Alloys and Compounds 364: 99-104

Zhu, J.J.; Huang, W.M.; Liew, K.M. 2003: Deformation energy in martensitic transformation. J. Phys., Iv 112: 179-182

Poenaru, D.N.; Greiner, W. 2003: Deformation energy minima at finite mass asymmetry. Europhysics Letters 64(2): 164-170

Jayaram, V.; Sinclair, R.; Rowcliffe, D.J. 1986: Deformation enhanced decarburization of WC-Co - Décarburation augmentée par déformation de WC-Co. Scripta Metallurgica 20(1): 55-60

Sun, Z.Q.; Yang, W.Y.; Qi, J.J.; Hu, A.M. 2002: Deformation enhanced transformation and dynamic recrystallization of ferrite in a low carbon steel during multipass hot deformation. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 334(1-2): 201-206

Coburn, L.A. 1992: Deformation estimates for the Berezin-Toeplits quantization. Communications in Mathematical Physics 149(2): 415-424

Bin, W.A.N.G.; Jianhua, X.U.A.N.; Wu, J.Q.; Su, Z.H.A.N.G.; Yue, W.A.N.G. 2008: Deformation Estimation and Analysis for Adaptive Radiation Therapy. Image Processing Conference (San Diego Ca 2008) / Spie Medical Imaging Symposium (2008): 691436.1-691436.9

Meletis, E.I.; Lian, K. 1996: Deformation evolution during initiation of transgranular stress corrosion cracking. Int. J. Fract 79(2): 165-178

Yongqiang, H.U.A.N.G.; Jianping, W.A.N.; Jiasheng, Z.H.A.N.G. 2006: Deformation extraction and its analysis based on wavelet transform. Proc. Spie Int. Soc. Opt. Eng: 64180V.1-64180V.8

Rashid, M.M. 1995: Deformation extrapolation and initial predictors in large-deformation finite element analysis. Computational Mechanics 16(5): 281-289

Christiansen, F.G. 1985: Deformation fabric and microstructures in ophiolitic chromitites and host ultramafics, Sultanate of Oman - La fabrique de déformation et les microstructures dans les chromitites ophiolitiques et les ultrabasites hôtes du sultanat d'Oman. Geologische Rundschau (1910. Print) 74(1): 61-76

Chernyshev Yu, F.; Ostroukhova, N.I. 1990: Deformation factors of asbestos thermosilicate in the ring cap of the mixer of an induction furnace. Refractories (New York) 31(1-2): 28-29

Machelski, C.; Michalski, J.B.; Janusz, L. 2009: Deformation Factors of Buried Corrugated Structures. Transportation Research Record (2116): 70-75

Sugui, T.I.A.N.; Xingfu, Y.U.; Jinghong, Y.A.N.G.; Nairen, Z.H.A.O.; Yongbo, X.U.; Zhuangqi, H.U. 2004: Deformation features of a nickel-base superalloy single crystal during compression creep. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 379: 141-147

Gogotsi, G.A.; Ostrovoi, D.Y.U. 1992: Deformation features of ceramics during heating. Refractories (New York) 33(1-2): 28-34

Lin, C.H.U.A.N.Y.O.N.G.E.Y.; Shi, L.A.N.B.I.N.O.N.G.E.Y.; Ross, J.V.; Russell, J.K. 1992: Deformation features of mantle xenoliths alont Tanlu fault zone and their geological implications. Dizhen Dizhi 14(4): 289-304

Liu, J.L.; Nie, Z.X.; Jiang, W.G. 2009: Deformation field of the soft substrate induced by capillary force. Physica. B, Condensed Matter 404(8-11): 1195-1199

Chiang, F.P.; Liu, B.C.; Li, S. 1991: Deformation fields around stable growing crack tips in aluminum. Engineering Fracture Mechanics 39(2): 185-193

Wang, Y.; Chiang, F.P. 1996: Deformation fields of interfacial cracks in adhesively bonded DCBs. Engineering Fracture Mechanics 55(2): 181-189

Clayton, J.D. 2010: Deformation, fracture, and fragmentation in brittle geologic solids. Int. J. Fract 163(1-2): 151-172

Afonin, S.M. 2003: Deformation, fracture, and mechanical characteristics of a compound piezoelectric transducer. Mechanics of Solids 38(6): 78-82

Saeglitz, M.; Krauss, G. 1997: Deformation, fracture, and mechanical properties of low-temperature-tempered martensite in SAE 43xx steels. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science 28(2): 377-387

Kang, J.; Zhang, F.C. 2012: Deformation, fracture, and wear behaviours of C+N enhancing alloying austenitic steels. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 558: 623-631

Selamoglu, S. 1991: Deformation-free motions of fluids. International Journal of Non-Linear Mechanics 26(5): 521-530

Schilling, M.; Wunstel, K. 1986: Deformation-free overgrowth of reactive ion beam etched submicron structures in InP by liquid phase epitaxy. Applied Physics Letters 49(12): 710-712

Anselmetti, D.; Gerber, C.; Michel, B.; Wolf, H.; Guntherodt, H.J.; Rohrer, H. 1993: Deformation-free topography from combined scanning force and tunnelling experiments. Europhysics Letters 23(6): 421-426

Peralta, P.; Llanes, L.; Bassani, J.; Laird, C. 1994: Deformation from twin-boundary stresses and the role of texture : application to fatigue. Philosophical Magazine. A. Physics of Condensed Matter. Defects and Mechanical Properties 70(1): 219-232

Roumina, R.; Sinclair, C.W. 2008: Deformation Geometry and Through-Thickness Strain Gradients in Asymmetric Rolling. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science 39(10): 2495-2503

Wallin, M.; Ristinmaa, M. 2005: Deformation gradient based kinematic hardening model. International Journal of Plasticity 21(10): 2025-2050

Zulle, B.; Linster, J.J.; Meissner, J.; Hurlimann, H.P. 1987: Deformation hardening and thinning in both elongation and shear of a low density polyethylene melt. Journal of Rheology (New York) 31(7): 583-598

Semiatin, S.L.; Berbon, P.B.; Langdon, T.G. 2001: Deformation heating and its effect on grain size evolution during equal channel angular extrusion. Scripta Materialia 44(1): 135-140

Pietrzyk, M.; Lenard, J.G. 1991: Deformation heating during cold rolling of aluminium strips. Journal of Mechanical Design (1990) 113(1): 69-74

Baudin, T.; Jasienski, Z.; Ceccaldi, D.; Penelle, R.; Piatkowski, A. 2000: Deformation heterogene d'un monocristal de cuivre d'orientation (111)[123] en compression plane imposee - Heterogenous deformation of a (111)[123] oriented copper single crystal in plane strain. Archives of Metallurgy 45(1): 17-32

Bastawros, A.F.; Evans, A.G. 2000: Deformation heterogeneity in cellular Al alloys. Adv. Eng. Mater. (Print) 2(4): 210-214

Johnson, S.E. 1990: Deformation history of the Otago schists, New Zealand, from progressively developed porphyroblast-matrix microstructures: uplift-collapse orogenesis and its implications. J. Struct. Geol 12(5-6): 727-746

Fatemivarzaneh, S.M.; Zareihanzaki, A.; Naderi, M.; Roostaei, A.A. 2010: Deformation homogeneity in accumulative back extrusion processing of AZ31 magnesium alloy. Journal of Alloys and Compounds 507(1): 207-214

Phillips, S.M. 1990: Deformation in a shear zone, central Ellesmere Island, Canadian Arctic Archipelago : implications for regional tectonics - Déformation dans une zone de cisaillement, partie centrale de l'ile Ellesmere, Iles Arctiques Canadiennes : implications pour la tectonique régionale. Marine Geology 93(1-4): 385-400

Fuqian, Y.A.N.G.; Geng, K.; Liaw, P.K.; Guojiang, F.A.N.; Hahn, C.H.O.O. 2007: Deformation in a Zr57Ti5Cu20Ni8Al10 bulk metallic glass during nanoindentation. Acta Materialia 55(1): 321-327

Flom, Y.; Arsenault, R.J. 1985: Deformation in Al-SiC composites due to thermal stresses - Verformungen in Al-SiC-Verbundwerkstoffen durch thermische Spannungen. Materials Science and Engineering 75(1-2): 151-167

Taneri, S.; Cemal Yalabik, M. 2001: Deformation in cooperative molecular motors. The European Physical Journal. B, Condensed Matter Physics 22(3): 403-407

Kobayashi, S.; Suzaki, H. 2000: Deformation in αCu-Al single crystals due to impact scratch. Materials Science Research International 6(2): 74-79

Darquennes, A.; Vandycke, S.; Schroeder, C. 2007: Deformation in faulted white chalk in Belgium. Geologica Belgica 10(3-4): 145-147

Song, M.; Hourston, D.J.; Pollock, H.M. 1996: Deformation in glassy polymers. Journal of Applied Polymer Science 59(1): 173-178

Kobayashi, S.; Nakata, I.; Miura, S. 1995: Deformation in KCl single crystal with spherical indenter above room temperature. Zairyo 44(504): 1151-1156

Gratz, A. 1984: Deformation in laboratory-shocked quartz - Déformation de quartz ayant subi un choc en laboratoire. Journal of Non-Crystalline Solids 67(1-3): 543-558

Murthy, N.S.; Grubb, D.T. 2003: Deformation in lamellar and crystalline structures: In situ simultaneous small-angle X-ray scattering and wide-angle X-ray diffraction measurements on polyethylene terephthalate fibers. Journal of Polymer Science. Part B. Polymer Physics 41(13): 1538-1553

Zhou, G.Y.; Jiang, Z.Y. 2004: Deformation in magnetorheological elastomer and elastomer-ferromagnet composite driven by a magnetic field. Smart Materials and Structures 13(2): 309-316

Thak Sang, B.Y.U.N.; Farrell, K.; Meimei, L.I. 2008: Deformation in metals after low-temperature irradiation: Part I -Mapping macroscopic deformation modes on true stress-dose plane. Acta Materialia 56(5): 1044-1055

Thak Sang, B.Y.U.N.; Farrell, K.; Meimei, L.I. 2008: Deformation in metals after low-temperature irradiation: Part II -Irradiation hardening, strain hardening, and stress ratios. Acta Materialia 56(5): 1056-1064

Miracle, D.B. 1991: Deformation in NiAl bicrystals. Acta Metallurgica et Materialia 39(7): 1457-1468

Kassner, M.E. 1983: Deformation in punched specimens of type 304 stainless steel - Déformation dans des éprouvettes poinçonnées d'acier inoxydable de type 304. Scripta Metallurgica 17(3): 425-426

Coujou, A. 1983: Deformation in situ dun alliage a basse energie de faute dempilement - In situ deformation of an alloy with a low stacking fault energy - In-situ-Verformung einer Legierung mit niedriger Stapelfehlerenergie. Acta Metallurgica 31(10): 1505-1515

Bagchi, B.; Samanta, K. 1993: Deformation in supersymmetric quantum mechanics. Physics Letters. a 179(2): 59-62

Henstock, T.J.; Levander, A.; Hole, J.A. 1997: Deformation in the lower crust of the San Andreas fault system in northern California. Science (Washington, D.C.) 278(5338): 650-653

Raymond, C.F. 1983: Deformation in the vicinity of ice divides. Journal of Glaciology 29(103): 357-373

Plummer, C.J.G.; Kausch, H.H. 1993: Deformation in thin films of amorphous and semicrystalline isotactic polystyrene. Polymer (Guildford) 34(9): 1972-1974

Kerans, R.J. 1984: Deformation in Ti3Al fatigued at room and elevated temperature - Verformung in Ti3Al nach Ermuedung bei Raum- und erhoehter Temperatur. Metallurgical Transactions. A, Physical Metallurgy and Materials Science 15(9): 1721-1729

Choi, E.S.; Gurnis, M. 2003: Deformation in transcurrent and extensional environments with widely spaced weak zones. Geophysical Research Letters 30(2): 48.1-48.4

Naranbaatar, K.; Murata, M.; Kuboki, T.; Shibata, T.; Jin, Y. 2010: Deformation in V-bending of aluminum alloy 5083 plate. Keikinzoku 60(6): 264-268

Joshi, N.; Muliana, A. 2010: Deformation in viscoelastic sandwich composites subject to moisture diffusion. Composite Structures 92(2): 254-264

Kapoor, R.; Wadekar, S.L.; Chakravartty, J.K. 2002: Deformation in Zr-1Nb-1Sn-0.1 Fe using stress relaxation technique. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 328(1-2): 324-333

Futamura, S. 1991: Deformation index : concept for hysteretic energy-loss process. Rubber Chemistry and Technology 64(1): 57-64

Chandra, B.P.; Deshmukh, N.G.; Sahu, R.B.; Verma, A.K. 1986: Deformation-induced after-glow in [(C2H5)N]2 MnBr4 crystals. Crystal Research and Technology (1979) 21(12): 1559-1565

Perepezko, J.H.; Hebert, R.J.; Hamann, J. 2007: Deformation-induced alloying and reactions in nanostructured multilayers. J. Alloys Compd 434-35: 459-462

Huang, J.Y.; Yasuda, H.; Mori, H. 1999: Deformation-induced amorphization in ball-milled silicon. Philosophical Magazine Letters 79(6): 305-314

Askenazy, P.D.; Kamenetzky, E.A.; Tanner, L.E.; Johnson, W.L. 1988: Deformation-induced amorphization of CuTi2 microcrystals in an amorphous matrix - Amorphisation induite par déformation des microcristaux CuTi2 dans une matrice amorphe. Conference on Solid State Amorphizing Transformations (Los Alamos 1987) 140: 149-160

Khan, A.S.; Shaojuan, Y.U. 2012: Deformation induced anisotropic responses of Ti―6Al―4V alloy. Part I: Experiments. International Journal of Plasticity 38: 1-13

Khan, A.S.; Shaojuan, Y.U.; Haowen, L.I.U. 2012: Deformation induced anisotropic responses of Ti―6Al―4V alloy Part II: A strain rate and temperature dependent anisotropic yield criterion. International Journal of Plasticity 38: 14-26

Pekarski, P.; Tkachenko, A.; Rabin, Y. 1994: Deformation-induced anomalous swelling of topologically disordered gels. Macromolecules 27(24): 7192-7196

Tirumalasetty, G.K.; Van Huis, M.A.; Kwakernaak, C.; Sietsma, J.; Sloof, W.G.; Zandbergen, H.W. 2012: Deformation-induced austenite grain rotation and transformation in TRIP-assisted steel. Acta Materialia 60(3): 1311-1321

Park, J.K.; Kim, K.H.; Chung, J.H.; Ok, S.Y. 2008: Deformation-Induced Austenite-to-Ferrite Massive Transformation in Medium Carbon Steel. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science 39(2): 235-242

Egami, T.; Dmowski, W.; Kosmetatos, P.; Boord, M.; Tomida, T.; Oikawa, E.; Inoue, A. 1995: Deformation induced bond orientational order in metallic glasses. J. Non-Cryst. Solids 192-93: 591-594

Loskutov, S.V.; Levitin, V.V.; Pogosov, V.V.; Pravda, M.I. 1995: Deformation-induced changes of work function in metals. Physics of Metals and Metallography 79(5): 473-475

Crenshaw, B.R.; Burnworth, M.; Khariwala, D.; Hiltner, A.; Mather, P.T.; Simha, R.; Weder, C. 2007: Deformation-induced color changes in mechanochromic polyethylene blends. Macromolecules 40(7): 2400-2408

Crenshaw, B.R.; Weder, C. 2003: Deformation-induced color changes in melt-processed photoluminescent polymer blends. Chemistry of Materials 15(25): 4717-4724

Rodriguezcabello, J.C.; Merino, J.C.; Quintanilla, L.; Pastor, J.M. 1996: Deformation-induced conformational changes in stretched samples of amorphous poly(ethylene terephthalate). Journal of Applied Polymer Science 62(11): 1953-1964

Vierke, J.; Schumacher, G.; Pilyugin, V.P.; Denks, I.A.; Zizak, I.; Wolf, C.; Wanderka, N.; Wollgarten, M.; Banhart, J. 2010: Deformation-induced crystallization in amorphous Al85Ni10La5 alloy. Journal of Alloys and Compounds 493(1-2): 683-691

Hummelgen, I.A.; Schroter, W. 1993: Deformation induced deep levels in p-CdTe. Applied Physics Letters 62(21): 2703-2704

Yonenaga, I.; Sumino, K. 1993: Deformation-induced defects and their thermal stability in silicon. Physica Status Solidi. A. Applied Research 137(2): 611-617

Nagumo, M.; Yagi, T.; Saitoh, H. 2000: Deformation-induced defects controlling fracture toughness of steel revealed by tritium desorption behaviors. Acta Materialia 48(4): 943-951

Dannefaer, S.; Mascher, P.; Kerr, D. 1991: Deformation-induced defects in GaAs. Journal of Applied Physics 69(7): 4080-4091

Nagumo, M.; Ohta, K.; Saitoh, H. 1999: Deformation induced defects in iron revealed by thermal desorption spectroscopy of tritium. Scripta Materialia 40(3): 313-319

Kramer, M.J.; Chumbley, L.S.; Mccallum, R.W.; Nellis, W.J.; Weir, S.; Kvam, E.P. 1990: Deformation induced defects in ReBa2Cu3O7-δ. Physica. C. Superconductivity 166(1-2): 115-124

Da Yu, T.Z.O.U. 1994: Deformation induced degradation of thermal conductivity in cracked solids. Journal of Composite Materials 28(10): 886-901

Gabrisch, H.; Mukherji, D.; Wahi, R.P. 1996: Deformation-induced dislocation networks at the γ-γ' interfaces in the single-crystal superalloy SC16 : A mechanism-based analysis. Philosophical Magazine. A. Physics of Condensed Matter. Structure, Defects and Mechanical Properties 74(1): 229-249

Hong, M.H.; Pirouz, P.; Chung, J.; Yoon, S.Y.; Demenet, J.L.; Nishiguchi, T.; Nishino, S. 2001: Deformation-induced dislocations in 15R-SiC grown by sublimation. Philosophical Magazine Letters 81(12): 823-831

Starenchenko, S.V.; Sizonenko, N.R.; Starenchenko, V.A.; Kozlov, E.V. 1996: Deformation-induced disordering of an Au4Zn alloy. Physics of Metals and Metallography 81(1): 57-60

Song, M.; Du, K.; Huang, Z.Y.; Huang, H.; Nie, Z.R.; Ye, H.Q. 2014: Deformation-induced dissolution and growth of precipitates in an Al―Mg―Er alloy during high-cycle fatigue. Acta Materialia 81: 409-419

Lee, E.W.; Medvedev, G.A.; Caruthers, J.M. 2010: Deformation Induced Evolution of Mobility in PMMA. Journal of Polymer Science. Part B. Polymer Physics 48(22): 2399-2401

Mani, A.; Salinasrodriguez,; Lopez, H.F. 2011: Deformation induced FCC to HCP transformation in a Co-27Cr-5Mo-0.05C alloy. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 528(7-8): 3037-3043

Bender, G.; Meisen, S.; Herres, N.; Wild, C.; Koidl, P. 1995: Deformation-induced ferroelectric domain pinning in chromium doped LiNbO3. Journal of Crystal Growth 152(4): 307-313

Chang, C.P.; Sun, P.L.; Kao, P.W. 2000: Deformation induced grain boundaries in commercially pure aluminium. Acta Materialia 48(13): 3377-3385

Su, Y.H.; Tomota, Y.; Harjo, S.; Adachi, Y. 2012: Deformation-induced grain coalescence in an electrodeposited pure iron sheet studied by in situ neutron diffraction and electron backscatter diffraction. Acta Materialia 60(8): 3393-3401

Wei, C.H.E.N.; Qiaoyan, S.U.N.; Lin, X.I.A.O.; Jun, S.U.N. 2012: Deformation-Induced Grain Refinement and Amorphization in Ti-10V-2Fe-3Al Alloy. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science 43(1): 316-326

Zhang, L.C.; Calin, M.; Paturaud, F.; Eckert, J. 2010: Deformation-induced grain refinement in body-centered cubic Co―Fe alloys upon room temperature compression. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 527(21-22): 5796-5800

Jie, Q.I.U.; Zhigang, W.A.N.G.; Ling, Y.A.N.G.; Junchai, Z.H.A.O.; Yanhua, N.I.U.; Hsiao, B.S. 2007: Deformation-induced highly oriented and stable mesomorphic phase in quenched isotactic polypropylene. Polymer (Guildford) 48(23): 6934-6947

Chengshuang, Z.H.O.U.; Xingyang, C.H.E.N.; Lin, Z.H.A.N.G.; Xiao, L.I. 2014: Deformation-induced hydrogen desorption from the surface oxide layer of 6061 aluminum alloy. Journal of Alloys and Compounds 617: 792-796

Jankowiak, R.; Bassler, H. 1984: Deformation-induced increase of spin-orbit coupling in the benzophenone molecule. Chemical Physics Letters 108(3): 209-213

Hoppe, R.; Appel, F. 2014: Deformation-induced internal stresses in multiphase titanium aluminide alloys. Acta Materialia 64: 169-178

Chunguang, S.H.A.O.; Haining, A.N.; Xiao, W.A.N.G.; Ru, J.I.A.; Baijin, Z.H.A.O.; Zhe, M.A.; Xiangyang, L.I.; Guoqiang, P.A.N.; Liangbin, L.I.; Shiming, H.O.N.G. 2007: Deformation-Induced Linear Chain-Ring Transition and Crystallization of Living Polymer Sulfur. Macromolecules 40(26): 9475-9481

Mughrabi, H. 2006: Deformation-induced long-range internal stresses and lattice plane misorientations and the role of geometrically necessary dislocations. Philosophical Magazine (2003. Print) 86(25-26): 4037-4054

Chang, Y.E.; Suslov, S.; Dong, L.I.N.; Cheng, G.J. 2012: Deformation-induced martensite and nanotwins by cryogenic laser shock peening of AISI 304 stainless steel and the effects on mechanical properties. Philosophical Magazine (2003. Print) 92(10-12): 1369-1389

Grosdidier, T.; Philippe, M.J. 2000: Deformation induced martensite and superelasticity in a β-metastable titanium alloy. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 291(1-2): 218-223

Hashimoto, N.; Byun, T.S. 2007: Deformation-induced martensite formation and dislocation channeling in neutron-irradiated 316 stainless steel. J. Nucl. Mater 367-370: 960-965

Weib, A.; Gutte, H.; Scheller, P.R. 2006: Deformation induced martensite formation and its effect on transformation induced plasticity (TRIP). Steel Research International 77(9-10): 727-732

Krupp, U.; West, C.; Christ, H.J. 2008: Deformation-induced martensite formation during cyclic deformation of metastable austenitic steel : Influence of temperature and carbon content. European Symposium on Martensitic Transformations, Esomat 2006 481-482: 713-717

Solomon, N.; Solomon, I. 2010: Deformation induced martensite in AISI 316 stainless steel. Revista de Metalurgia (Madrid) 46(2): 121-128

Yinong, L.I.U.; Tan, G.; Miyazaki, S. 2006: Deformation-induced martensite stabilisation in [100] single-crystalline Ni-Ti. Icomat-05 : International Conference on Martensitic Transformations 438-440: 612-616

Shrinivas, V.; Varma, S.K.; Murr, L.E. 1995: Deformation-induced martensitic characteristics in 304 and 316 stainless steels during room-temperature rolling. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science 26(3): 661-671

Yongfeng, L.I.; Fuming, B.U.; Wenbin, K.A.N.; Hongliang, P.A.N. 2013: Deformation-Induced Martensitic Transformation Behavior in Cold-Rolled AISI304 Stainless Steels. Materials and Manufacturing Processes 28(1-3): 256-259

Nakada, N.; Ito, H.; Matsuoka, Y.; Tsuchiyama, T.; Takaki, S. 2010: Deformation-induced martensitic transformation behavior in cold-rolled and cold-drawn type 316 stainless steels. Acta Materialia 58(3): 895-903

Smaga, M.; Walther, F.; Eifler, D. 2008: Deformation-induced martensitic transformation in metastable austenitic steels. Meeting of the International Conference on the Strength of Materials 483-484: 394-397

Nagy, E.; Mertinger, V.; Tranta, F.; Solyom, J. 2004: Deformation induced martensitic transformation in stainless steels. Esomat: European Symposium on Martensitic Transformation (2003) 378(1-2): 308-313

Winkler, M.; Schenk, M.; Hahnert, I. 1992: Deformation induced micro-twins in CdTe ?. Crystal Research and Technology (1979) 27(8): 1047-1051

Donovan, P.E.; Cochrane, R.F. 1988: Deformation-induced microcracking in Pd40Ni40P20 metallic glass - Microfissuration induite par déformation dans le verre métallique Pd40Ni40P20. Scripta Metallurgica 22(11): 1765-1770

Advani, A.H.; Murr, L.E.; Matlock, D.J.; Romero, R.J.; Fisher, W.W.; Tarin, P.M.; Maldonado, J.G.; Cedillo, C.M.; Miller, R.L.; Trillo, E.A. 1993: Deformation-induced microstructure and martensite effects on transgranular carbide precipitation in type 304 stainless steels. Acta Metallurgica et Materialia 41(9): 2589-2600

Wei, C.H.E.N.; Qiaoyan, S.U.N.; Lin, X.I.A.O.; Jun, S.U.N. 2010: Deformation-induced microstructure refinement in primary α phase-containing Ti-10V-2Fe-3Al alloy. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 527(27-28): 7225-7234

Clayton, J.M.; Usmar, S.G.; Fretwell, H.M.; Mackenzie, I.K.; Alam, M.A. 1995: Deformation-induced microvoids in bismuth and possible positronium formation. Journal of Physics. Condensed Matter 7(16): 3181-3186

Sedlacek, R.; Kratochvil, J.; Blum, W. 2001: Deformation induced misorientations: Initial stage of subgrain formation as a plastic instability. Physica Status Solidi. A. Applied Research 186(1): 1-16

Lee, H.N.; Riggleman, R.A.; De Pablo, J.J.; Ediger, M.D. 2009: Deformation-Induced Mobility in Polymer Glasses during Multistep Creep Experiments and Simulations. Macromolecules 42(12): 4328-4336

Sevegney, M.S.; Parthasarthy, G.; Kannan, R.M.; Thurman, D.W.; Fernandezballester, L. 2003: Deformation-induced morphology changes and orientation behavior in Syndiotactic polypropylene. Macromolecules 36(17): 6472-6483

Ruiying, B.A.O.; Zhitian, D.I.N.G.; Ganji, Z.H.O.N.G.; Wei, Y.A.N.G.; Banghu, X.I.E.; Mingbo, Y.A.N.G. 2012: Deformation-induced morphology evolution during uniaxial stretching of isotactic polypropylene: effect of temperature. Colloid and Polymer Science 290(3): 261-274

Chen, H.; He, Y.; Shiflet, G.J.; Poon, S.J. 1994: Deformation-induced nanocrystal formation in shear bands of amorphous alloys. Nature (London) 367(6463): 541-543

Gao, M.C.; Hackenberg, R.E.; Shiflet, G.J. 2001: Deformation-induced nanocrystal precipitation in Al-base metallic glasses. Materials Transactions - Jim 42(8): 1741-1747

Lee, J.C.; Kim, Y.C.; Ahn, J.P.; Kim, H.S.; Lee, S.H.; Lee, B.J. 2004: Deformation-induced nanocrystallization and its influence on work hardening in a bulk amorphous matrix composite. Acta Materialia 52(6): 1525-1533

Jiang, W.H.; Pinkerton, F.E.; Atzmon, M. 2003: Deformation-induced nanocrystallization in an Al-based amorphous alloy at a subambient temperature. Scripta Materialia 48(8): 1195-1200

Song, S.H.; Zhang, Q.; Weng, L.Q. 2008: Deformation-induced non-equilibrium grain boundary segregation in dilute alloys. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 473(1-2): 226-232

Shabashov, V.A.; Ovchinnikov, V.V.; Mulyukov, R.R.; Valiev, R.Z.; Filippova, N.P. 1999: Deformation-induced nonequilibrium grain-boundary phase in submicrocrystalline iron. Nanostructured Materials 11(8): 1017-1029

Koneva, N.A.; Kozlov, E.V. 2004: Deformation-induced ordering of dislocation structures. Icsma 13 International Conference on the Strength of Materials 387-389: 64-66

Bladon, P.; Terentjev, E.M.; Warner, M. 1994: Deformation-induced orientational transitions in liquid crystals elastomer. Journal de Physique. Ii 4(1): 75-91

Benson, M.L.; Liaw, P.K.; Klarstrom, D.L.; Saleh, T.A.; Choo, H.; Brown, D.W.; Daymond, M.R.; Huang, E.W.; Wang, X.L.; Stoica, A.D.; Buchanan, R.A. 2006: Deformation-induced phase development in a cobalt-based superalloy during monotonic and cyclic deformation. Physica, B Condens. Matter 385-86: 523-525

Ermakov, A.E.; Gapontsev, V.L.; Kondratev, V.V.; Gornostyrev, Y.N. 1999: Deformation-induced phase instability in nanocrystalline alloys. Physics of Metals and Metallography 88(3): 211-218

Abell, K.C.R.; Shen, Y.L. 2002: Deformation induced phase rearrangement in near eutectic tin-lead alloy. Acta Materialia 50(12): 3191-3202

Zhiyong, J.I.A.N.G.; Lianlian, F.U.; Yingying, S.U.N.; Xiuhong, L.I.; Yongfeng, M.E.N. 2011: Deformation-Induced Phase Separation in Blends of Poly(ε-caprolactone) with Poly(vinyl methyl ether). Macromolecules 44(17): 7062-7065

De, A.K.; Speer, J.G.; Matlock, D.K.; Murdock, D.C.; Mataya, M.C.; Comstock, R.J. 2006: Deformation-induced phase transformation and strain hardening in type 304 austenitic stainless steel. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science 37(6): 1875-1886

Wang, J.G.; Zhang, L.C.; Chen, G.L.; Ye, H.Q.; Nieh, T.G. 1998: Deformation-induced γ↔α2 phase transformation in a hot-forged Ti-45Al-10Nb alloy. Mater. Sci. Eng. A Struct. Mater. Prop. Microstruct. Proces 239-40: 287-292

Bin, C.H.E.N.; Jun, W.A.N.G.; Yiwei, Z.H.U.; Xiaozhou, L.I.A.O.; Chunsheng, L.U.; Mai, Y.W.; Ringer, S.P.; Fujiu, K.E.; Yaogen, S.H.E.N. 2014: Deformation-induced phase transformation in 4H-SiC nanopillars. Acta Materialia 80: 392-399

Kawakami, D.; Hsiao, B.S.; Burger, C.; Shaofeng, R.A.N.; Avilaorta, C.; Sics, I.; Kikutani, T.; Jacob, K.I.; Chu, B. 2005: Deformation-induced phase transition and superstructure formation in poly(ethylene terephthalate). Macromolecules 38(1): 91-103

Shabashov, V.A.; Korshunov, L.G.; Mukoseev, A.G.; Sagaradze, V.V.; Makarov, A.V.; Pilyugin, V.P.; Novikov, S.I.; Vildanova, N.F. 2003: Deformation-induced phase transitions in a high-carbon steel. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 346(1-2): 196-207

Liangui, B.A.I.; Zhihua, H.O.N.G.; Daoliang, W.A.N.G.; Junjun, L.I.; Xiao, W.A.N.G.; Guoqiang, P.A.N.; Liangbin, L.I.; Xiuhong, L.I. 2010: Deformation-induced phase transitions of polyamide 12 in its elastomer segmented copolymers. Polymer (Guildford) 51(23): 5604-5611

Baumann, F.H.; Schroter, W. 1983: Deformation-induced point defects in germanium. Philosophical Magazine. B. Physics of Condensed Matter. Electronic, Optical and Magnetic Properties 48(1): 55-61

Kovacs, Z.; Henits, P.; Zhilyaev, A.P.; Revesz, A. 2006: Deformation induced primary crystallization in a thermally non-primary crystallizing amorphous Al85Ce8Ni5Co2 alloy. Scripta Materialia 54(10): 1733-1737

Kumar, M.; Vasudevan, V.K. 1996: Deformation-induced pseudo-twinning and a new superstructure in Ni2Mo precipitates contained in a Ni-25Mo-8Cr alloy. Acta Materialia 44(9): 3575-3583

Moecher, D.P.; Wintsch, R.P. 1994: Deformation-induced reconstitution and local resetting of mineral equilibria in polymetamorphic gneisses: tectonic and metamorphic implications. Journal of Metamorphic Geology 12(4): 523-538

Shi, N.; Arsenault, R.J.; Krawitz, A.D.; Smith, L.F. 1993: Deformation-induced residual stress changes in SiC whisker-reinforced 6061 Al composites. Metallurgical Transactions. A, Physical Metallurgy and Materials Science 24(1): 187-196

Dubinsky, V.A.; Rebrov, A.V.; Ungar, G.; Antipov, E.M. 2004: Deformation-induced reversible changes in the structure of highly crystalline poly(hydroxyalkanoate) fibers. Polymer Science. Series B 46(9-10): 312-315

Mantani, Y.; Takemoto, Y.; Hida, M.; Sakakibara, A.; Takayama, K.; Yasuda, H. 2000: Deformation induced structural change of quenched ω phase in Ti-20 mass%Mo alloy. Nippon Kinzoku Gakkaishi (1952) 64(10): 934-939

Yufu, D.E.N.G.; Lianlong, H.E.; Qingsheng, Z.H.A.N.G.; Haifeng, Z.H.A.N.G.; Hengqiang, Y.E. 2003: Deformation-induced structural changes in bulk metallic glass at room temperature. Advanced Engineering Materials 5(10): 738-741

White, J.L.; Haifeng, S.H.A.N. 2006: Deformation-induced structural changes in crystalline polyolefins. Polymer-Plastics Technology and Engineering (Softcover Ed) 45(1-3): 317-328

Bao, R.Y.; Ding, Z.T.; Liu, Z.Y.; Wei, Y.A.N.G.; Xie, B.H.; Yang, M.B. 2013: Deformation-induced structure evolution of oriented β-polypropylene during uniaxial stretching. Polymer (Guildford) 54(3): 1259-1268

Baydogan, M.; Akoy, M.A.; Kayali, E.S.; Cimenoglu, H. 2003: Deformation induced surface roughening of austenitic stainless steels. Isij International 43(11): 1795-1798

Sundaram, P.A. 1995: Deformation-induced surface roughening studies in an AISI 1090 spheroidized steel. Scripta Metallurgica et Materialia 33(7): 1093-1099

Hebert, R.J.; Perepezko, J.H. 2004: Deformation-induced synthesis and structural transformations of metallic multilayers. Scripta Materialia 50(6): 807-812

Grasso, G.; Perin, A.; Flukiger, R. 1995: Deformation-induced texture in cold-rolled Ag sheathed Bi(2223) tapes. Physica. C. Superconductivity 250(1-2): 43-49

Gabay, A.M.; Marinescu, M.; Liu, J.F.; Hadjipanayis, G.C. 2009: Deformation-induced texture in nanocrystalline 2:17, 1:5 and 2:7 Sm-Co magnets. Journal of Magnetism and Magnetic Materials 321(19): 3318-3323

Geissler, D.; Muller, K.H.; Freudenberger, J.; Nenkov, K.; Krautz, M.; Eickemeyer, J.; Schultz, L. 2011: Deformation induced thermoremanent magnetisation in an FeMnNiCr antiferromagnetic alloy. Journal of Alloys and Compounds 509(9): 3726-3734

Takemoto, Y.; Hida, M.; Sakakibara, A. 1995: Deformation induced transformation of ω phase in aged Ti-14 mass%Mo alloy. Nippon Kinzoku Gakkaishi (1952) 59(8): 780-787

Mukherjee, M.; Shiv Brat, S.I.N.G.H.; Omkar Nath, M.O.H.A.N.T.Y. 2008: Deformation-Induced Transformation of Retained Austenite in Transformation Induced Plasticity-Aided Steels : A Thermodynamic Model. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science 39(10): 2319-2328

Ravi Kumar, B.; Singh, A.K.; Mahato, B.; De, P.K.; Bandyopadhyay, N.R.; Bhattacharya, D.K. 2006: Deformation-induced transformation textures in metastable austenitic stainless steel. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 429(1-2): 205-211

Negri, D.; Yavari, A.R.; Deriu, A. 1999: Deformation induced transformations and grain boundary thickness in nanocrystalline B2 FeAl. Acta Materialia 47(18): 4545-4554

Shabashov, V.A.; Borisov, S.V.; Zamatovsky, A.E.; Vildanova, N.F.; Mukoseev, A.G.; Litvinov, A.V.; Shepatkovsky, O.P. 2007: Deformation-induced transformations in nitride layers formed in bcc iron. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 452-453: 575-583

Chow, R.; Tiller, W.A. 1984: Deformation-induced work function changes in Cu single crystals. I: Experiment - Changements du travail de sortie induits par une déformation dans des monocristaux de Cu. I: Expérience. Journal of Applied Physics 55(5): 1339-1345

Chow, R.; Tiller, W.A. 1984: Deformation-induced work function changes in Cu single crystals. II: Theory - Changements du travail de sortie induits par une déformation dans des monocristaux de Cu. II: Théorie. Journal of Applied Physics 55(5): 1346-1352

Lehnert, W.; Kawalla, R. 2005: Deformation inhomogeneity and texture development brought about in steel strip by multi-step cold rolling. Steel Research International 76(2-3): 142-147

Guozhen, Z.H.U.; Xiaohua, H.U.; Jidong, K.A.N.G.; Mishra, R.K.; Wilkinson, D.S. 2011: Deformation inhomogeneity in large-grained AA5754 sheets. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 528(12): 4187-4198

Lambiase, F.; Di Ilio, A. 2012: Deformation inhomogeneity in roll drawing process. Journal of Manufacturing Processes 14(3): 208-215

Vorobev, E.V.; Anpilogova, T.V. 2007: Deformation instability and strength of structural alloys under conditions of stress concentrations and cryogenic temperatures. Strength of Materials 39(2): 219-221

Banarse, D.S.; Duller, A.W.G. 1997: Deformation invariant visual object recognition : Experiments with a self-organising neural architecture. Neural Computing and Applications 6(2): 79-90

Rivlin, E.; Weiss, I. 1997: Deformation invariants in object recognition. Computer Vision and Image Understanding 65(1): 95-108

Blum, W.; Pollmann, T.; Hofmann, U.; Weidinger, P. 1996: Deformation kinetics at constant structure during work hardening and steady state deformation of pure aluminium. Physica Status Solidi. A. Applied Research 157(2): 329-337

Dubach, A.; Torre, F.H.D.; Loffler, J.F. 2007: Deformation kinetics in Zr-based bulk metallic glasses and its dependence on temperature and strain-rate sensitivity. Philosophical Magazine Letters 87(9): 695-704

Valanis, K.C.; Peng, S.T.J. 1983: Deformation kinetics of ageing materials. Polymer (Guildford) 24(12): 1551-1557

Blum, W.; Li, Y.J.; Breutinger, F. 2007: Deformation kinetics of coarse-grained and ultrafine-grained commercially pure Ti. International Symposium on Physics of Materials 462(1-2): 275-278

Yin, C.A.; Doener, M.; Conrad, H. 1983: Deformation kinetics of commercial Ti-50A (0.5 At. Pct O eq) at low temperatures (T<0.3 Tm) - Verformungskinetik von handelsueblichem Ti-50A (0,5 At.-% O-Aequivalent) bei tiefen Temperaturen (T<0,3 Tm). Metallurgical Transactions. A, Physical Metallurgy and Materials Science 14A (12): 2545-2556

Chow, T.S. 1988: Deformation kinetics of cross-linked polymers. American Chemical Society. Meeting 193 (Denver 1987) (367): 124-135

Li, Y.J.; Mueller, J.; Hoppel, H.W.; Goken, M.; Blum, W. 2007: Deformation kinetics of nanocrystalline nickel. Acta Materialia 55(17): 5708-5717

Toh, W.; Teng Yong, N.G.; Zishun, L.I.U.; Jianying, H.U. 2014: Deformation kinetics of pH-sensitive hydrogels. Polymer International 63(9): 1578-1583

Moo Seok, L.E.E.; Tae Hwan, O.H.; Sang Yong, K.I.M.; Hyun Joo, S.H.I.M. 1999: Deformation kinetics of polypropylene hollow fibers in a continuous drawing process. Journal of Applied Polymer Science 74(7): 1836-1845

Dalla Torre, F.H.; Dubach, A.; Loffler, J.F. 2010: Deformation kinetics of Zr-based bulk metallic glasses—Temperature and strain rate influences on shear banding. J. Alloys Compd 495(2): 341-344

Kowalsky, M.J. 2000: Deformation limit states for circular reinforced concrete bridge columns - Etats limites de deformation pour les poteaux de pont circulaires en béton armé. Journal of Structural Engineering (New York) 126(8): 869-878

Winkler, M.; Kress, G. 2010: Deformation limits for corrugated cross-ply laminates. Composite Structures 92(6): 1458-1468

Kazaz, I.; Gulkan, P.; Yakut, A. 2012: Deformation Limits for Structural Walls with Confined Boundaries. Earthquake Spectra 28(3): 1019-1046

Viot, P.; Bouix, R.; Iordanoff, I.; Lataillade, J.L. 2010: Deformation localisation modelling of polymer foam microstructure under compression: A new approach by discrete element modelling. Composite Structures 92(2): 585-592

Zuev, L.B.; Semukhin, B.S.; Zavodchikov, S.Y. 2002: Deformation localization and internal residual stresses in billets for Zr-Nb pipe rolling. Materials Letters (General Ed.) 57(4): 1015-1020

Li, G.A.; Zhen, L.; Lin, C.; Gao, R.S.; Tan, X.; Xu, C.Y. 2005: Deformation localization and recrystallization in TC4 alloy under impact condition. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 395(1-2): 98-101

Rogers, D.N.; Shen, Y.L. 2014: Deformation localization in constrained layers of metallic glasses: A parametric modeling analysis. Thin Solid Films 561: 108-113

Hagihara, T.; Hayashiuchi, Y.; Kojima, Y.; Yamamoto, Y.; Ohwaki, S.; Okada, T. 1989: Deformation luminescence in gamma-irradiated alkali halides. Physics Letters. a 137(4-5): 213-216

Panin, A.V.; Panina, A.A.; Ivanov, Y.F. 2008: Deformation macrolocalisation and fracture in ultrafine-grained armco iron. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 486(1-2): 267-272

Jimenezmelendo, M.; Dominguezrodriguez, A.; Routbort, J.L. 1995: Deformation maps of YBa2Cu3O7-x superconductors. Scripta Metallurgica et Materialia 32(4): 621-626

Ostas, O.P.; Zmurklimenko, V.T.; Strok, L.P. 1983: Deformation martensite effects on the cyclic low-temperature crack resistance of steel 03Ch13AG19. Fiziko-Himiceskaa Mehanika Materialov 19(2): 49-55

Hwang, S.F.; Wu, W.J. 2012: Deformation measurement around a high strain-gradient region using a digital image correlation method. Journal of Mechanical Science and Technology 26(10): 3169-3175

Morimoto, Y.; Nomura, T.; Fujigaki, M.; Yoneyama, S.; Takahashi, I. 2005: Deformation measurement by phase-shifting digital holography. Experimental Mechanics 45(1): 65-70

Cooper, M.A.R. 1984: Deformation measurement by photogrammetry - Mesure de déformation par photogrammétrie. Photogrammetric Record 11(63): 291-301

Morimoto, Y.; Hayashi, T. 1984: Deformation measurement during powder compaction by a scanning-moiré method - Messung der Deformation bei Pulver-Verdichtung mit einem abtastenden Moiréverfahren. Experimental Mechanics 24(2): 112-116

Xiaoliang, G.O.N.G.; Bansmer, S.; Strobach, C.; Unger, R.; Haupt, M. 2014: Deformation Measurement of a Birdlike Airfoil with Optical Flow and Numerical Simulation. Aiaa Journal 52(12): 2807-2816

Jiangtao, R.U.A.N.; Shibin, W.A.N.G.; Jingwei, T.O.N.G.; Min, S.H.E.N.; Aymerich, F.; Priolo, P. 2012: Deformation Measurement of Composite Laminate With Impact Damage Under Compressive Loads. Polymers and Polymer Composites 20(1-2): 177-182

Wang, X.I.S.H.U.; Zhang, J.I.A.X.I.N.; Zhu, S.U.I.Q.U.N.; Shi, G.A.O.Q.U.A.N. 2002: Deformation measurement of conducting polythiophene thin films by an electronic speckle pattern interferometric method. Acta Mechanica Solida Sinica 15(1): 30-35

Xie, H.U.I.M.I.N.; Dietz, P.; Schmidt, A.; Kishimoto, S.; Shinya, N.; Dai, F.U.L.O.N.G. 1999: Deformation measurement of impulsed viscoelastic plate with moiré method. J. Intell. Mater. Syst. Struct 10(7): 548-551

Koka, J.; Li, Y.O.N.G.Q.U.I.N.G. 1989: Deformation measurement using Fourier transform technique. Experimentelle Technik der Physik 37(1): 23-29

Lu, H.; Cary, P.D. 2000: Deformation measurements by digital image correlation : Implementation of a second-order displacement gradient. Experimental Mechanics 40(4): 393-400

Brandenberger, A.J.; Ghosh, S.K.; Mohamed, B.O.U.G.O.U.S.S. 1983: Deformation measurements of power dams with aerial photogrammetry - Mesures des déformations des barrages de centrales hydroélectriques par photogrammétrie aérienne. Photogrammetric Engineering and Remote Sensing 49(11): 1561-1567

Briguet, C.; Morris, D.G. 1997: Deformation mechanics in a mechanically alloyed Fe-40Al alloy and the influence of recrystallizing and ageing heat treatments. Acta Materialia 45(12): 4939-4951

Wei, X.M.; Zhang, J.M.; Xu, K.W. 2008: Deformation mechanism analysis of fee metals by GPF. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 486(1-2): 540-544

Ruan, H.H.; Yu, T.X. 2003: Deformation mechanism and defect sensitivity of notched free-free beam and cantilever beam under impact. International Journal of Impact Engineering 28(1): 33-63

Kaufmann, H.J.; Luft, A.; Schulze, D. 1984: Deformation mechanism and dislocation structure of high-purity molybdenum single crystals at low temperatures - Verformungsmechanismus und Versetzungsstruktur von hochreinen Molybdaeneinkristallen bei tiefen Temperaturen. Crystal Research and Technology (1979) 19(3): 357-372

Mingliang, S.H.I.A.O.; Nair, S.V.; Garrett, P.D.; Pollard, R.E. 1994: Deformation mechanism and fibre toughening of nylon 6,6. Polymer (Guildford) 35(2): 306-314

Kuramoto, S.; Furuta, T.; Nagasako, N. 2012: Deformation mechanism and grain refinement behavior in Gum Metal. Keikinzoku 62(11): 406-411

Wolf, D.; Yamakov, V.; Phillpot, S.R.; Mukherjee, A.K. 2003: Deformation mechanism and inverse Hall-Petch behavior in nanocrystalline materials. Zeitschrift für Metallkunde 94(10): 1091-1097

Kwon, W.S.; Ham, S.J.; Paik, K.W. 2006: Deformation mechanism and its effect on electrical conductivity of ACF flip chip package under thermal cycling condition : An experimental study. Microelectronics and Reliability 46(2-4): 589-599

Takeuchi, S.; Tomizuka, A.; Iwanaga, H. 1988: Deformation mechanism and photoplastic effects in CuBr single crystals. Philosophical Magazine. A. Physics of Condensed Matter. Defects and Mechanical Properties 57(5): 767-778

Nosova, G.I.; Polyakova, N.A. 1995: Deformation mechanism and strength properties of an aged FCC Ni-V alloy containing tetragonal precipitates of different orientations. Physics of Metals and Metallography 79(1): 98-101

Grabco, D.; Leu, D. 2010: Deformation mechanism as a function of applied load under metal microindentation. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 527(26): 6987-6996

Chen, G.L.; Zhang, L.C. 2002: Deformation mechanism at large strains in a high-Nb-containing TiAl at room temperature. Mater. Sci. Eng. A Struct. Mater. Prop. Microstruct. Proces 329-31: 163-170

Yamakov, V.; Wolf, D.; Phillpot, S.R.; Mukherjee, A.K.; Gleiter, H. 2003: Deformation mechanism crossover and mechanical behaviour in nanocrystalline materials. Philosophical Magazine Letters 83(6): 385-393

Yuan, C.; Guo, J.T.; Yang, H.C.; Wang, S.H. 1998: Deformation mechanism for high temperature creep of a directionally solidified nickel-base superalloy. Scripta Materialia 39(7): 991-997

Khedr, S.A. 1986: Deformation mechanism in asphaltic concrete - Mécanisme de déformation du béton bitumineux. Journal of Transportation Engineering 112(1): 29-45

Kobayashi, S.; Kuwata, M.; Mori, K.; Miura, S. 1995: Deformation mechanism in αCu-Al single crystals and bicrystals under scratching with pyramidal indentor. Zairyo 44(496): 97-102

Thilly, L.; Veron, M.; Ludwig, O.; Lecouturier, F. 2001: Deformation mechanism in high strength Cu/Nb nanocomposites. Dislocations 2000: International Conference on the Fundamentals of Plastic Deformation 309-310: 510-513

Bruckner, W. 1999: Deformation-mechanism map for CuNi thin films. Physica Status Solidi. A. Applied Research 176(2): 919-924

Koleshko, V.M.; Kiryushin, I.V. 1988: Deformation mechanism maps and gettering diagrams for single-crystal silicon. Physica Status Solidi. A. Applied Research 109(1): 161-169

Sargent, P.M.; Ashby, M.F. 1984: Deformation mechanism maps for alkali metals - Cartes de mécanismes de déformation pour les métaux alcalins. Scripta Metallurgica 18(2): 145-150

Dennis, P.F.; Atkinson, B.K. 1981: Deformation mechanism maps for flow and fracture of quartz - Schémas du mécanisme de déformation par l'écoulement plastique et la fracturation du quartz. Prog. Exp. Petrol (5): 314-315

Mohamed, F.A. 2011: Deformation mechanism maps for micro-grained, ultrafine-grained, and nano-grained materials. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 528(3): 1431-1435

Edward, G.H.; Glen, R.M. 1988: Deformation mechanism maps for poly(methyl methacrylate) and polycarbonate. Materials Forum (Rushcutters Bay) 11: 117-132

Misra, A.; Verdier, M.; Kung, H.; Embury, J.D.; Hirth, J.P. 1999: Deformation mechanism maps for polycrystalline metallic multiplayers. Scripta Materialia 41(9): 973-979

Sargent, P.M.; Ashby, M.F. 1983: Deformation-mechanism maps for silicon carbide - Schémas des mécanismes de déformation pour le carbure de silicium. Scripta Metallurgica 17(7): 951-957

Somekawa, H.; Inoue, T.; Mukai, T. 2010: Deformation mechanism near crack-tip by finite element analysis and microstructure observation in magnesium alloys. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 527(7-8): 1761-1768

Bin, H.U.A.N.G.; Ito, M.; Kanamoto, T. 1994: Deformation mechanism of amorphous poly(ethylene terephthalate) as a function of molecular weight and entanglements. Polymer (Guildford) 35(6): 1210-1215

Seog Joo, K.A.N.G.; Matsuo, M. 1989: Deformation mechanism of calender films and melt spun fibers produced by low molecular weight polyethylene. Polymer Journal 21(1): 49-63

Miao, T.D.; Wang, Z.G. 1991: Deformation mechanism of collapsible loess in consideration of the microstructure instability. Catena. Supplement (Giessen) (20): 93-105

Akbari, B.; Bagheri, R. 2007: Deformation mechanism of epoxy/clay nanocomposite. European Polymer Journal 43(3): 782-788

Shiono, T.; Ishitomi, H.; Okamoto, Y.; Nishida, T. 2000: Deformation mechanism of fine-grained magnesium aluminate spinel prepared using an alkoxide precursor. Journal of the American Ceramic Society 83(3): 645-647

Rahman, R.; Foster, J.T. 2014: Deformation mechanism of graphene in amorphous polyethylene: A molecular dynamics based study. Computational Materials Science 87: 232-240

Moriwaki, I.; Ohta, K. 1995: Deformation mechanism of hot finish rolling of plastic gears. Jsme International Journal. Series C, Dynamics, Control, Robotics, Design and Manufacturing 38(2): 312-318

Kobayashi, S.; Kusunoki, H.; Miura, S. 1992: Deformation mechanism of KCl single crystal by spherical indentor. I : Indentation with steel ball. Zairyo 41(465): 861-866

Kobayashi, S.; Kusunoki, H.; Miura, S. 1992: Deformation mechanism of KCl single crystal by spherical indentor. II : Scratch with steel ball. Zairyo 41(465): 867-873

Changhui, L.E.I. 2003: Deformation mechanism of long-period TiAl2. Philosophical Magazine Letters 83(3): 167-176

Zhang, J.X.; Sato, M.; Ishida, A. 2006: Deformation mechanism of martensite in Ti-rich Ti-Ni shape memory alloy thin films. Acta Materialia 54(4): 1185-1198

Hwang, S.; Nishimura, C.; Mccormick, P.G. 2001: Deformation mechanism of nanocrystalline magnesium in compression. Scr. Mater 44(8-9): 1507-1511

Yanqiu, Z.H.A.N.G.; Shuyong, J.I.A.N.G.; Li, H.U.; Yulong, L.I.A.N.G. 2013: Deformation mechanism of NiTi shape memory alloy subjected to severe plastic deformation at low temperature. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 559: 607-614

Matsuo, M.; Sato, R.; Yanagida, N.; Shimizu, Y. 1992: Deformation mechanism of nylon 6 gel and melt films estimated in terms of orientation distribution function of crystallites. Polymer (Guildford) 33(8): 1640-1648

Kim, G.M.; Goerlitz, S.; Michler, G.H. 2007: Deformation mechanism of nylon 6/layered silicate nanocomposites : Role of the layered silicate. Journal of Applied Polymer Science 105(1): 38-48

Miura, S.; Koushima, M. 2001: Deformation mechanism of [001] oriented Fe-30%Cr alloy single crystals. Zairyo 50(11): 1223-1227

Miura, S.; Koushima, M. 2003: Deformation mechanism of [001] oriented Fe-30%Cr alloy single crystals. Materials Science Research International 9(3): 204-209

Matsuo, M.; Xu, C. 1997: Deformation mechanism of polyethylene spherulites estimated by crystal orientation distribution function and small angle light scattering under Hv polarization condition. Polymer (Guildford) 38(17): 4311-4318

Jun, Y.I.N.; Yong, Z.H.A.N.G.; Yinxi, Z.H.A.N.G. 2005: Deformation mechanism of polypropylene composites filled with magnesium hydroxide. Journal of Applied Polymer Science 97(5): 1922-1930

Murai, M.; Takizawa, K.; Soejima, K.; Sotouchi, H. 1996: Deformation mechanism of porous nickel oxide in molten Li/K carbonates. Journal of the Electrochemical Society 143(8): 2481-2486

Takeuchi, S.; Edagawa, K.; Tamura, R. 2001: Deformation mechanism of quasicrystals. Icsma-12: International Conference on the Strength of Materials 319/21: 93-96

Shuang, X.U.; Guo, Y.F.; Wang, Z.D. 2013: Deformation mechanism of the single-crystalline nano-Cu films: Molecular dynamics simulation. Computational Materials Science 67: 140-145

Asaro, R.J.; Krysl, P.; Kad, B. 2003: Deformation mechanism transitions in nanoscale fcc metals. Philosophical Magazine Letters 83(12): 733-743

Shuting, L.E.I.; Shin, Y.C.; Incropera, F.P. 2000: Deformation mechanisms and constitutive modeling for silicon nitride undergoing laser-assisted machining. International Journal of Machine Tools and Manufacture 40(15): 2213-2233

Dymeck, S.; Dollar, M.; Hwang, S.J.; Nash, P. 1992: Deformation mechanisms and ductility of mechanically alloyed NiAl. Mater. Sci. Eng. A Struct. Mater. Prop. Microstruct. Proces 152(1-2): 160-165

Di Landro, L.; Sala, G.; Olivieri, D. 2002: Deformation mechanisms and energy absorption of polystyrene foams for protective helmets. Polymer Testing 21(2): 217-228

Labaume, P.; Carrioschaffhauser, E.; Gamond, J.F.; Renard, F. 2004: Deformation mechanisms and fluid-driven mass transfers in the recent fault zones of the Corinth Rift (Greece) - Mécanisme de déformation et transfert de matière assistés par les fluides dans les zones de failles récentes du rift de Corinthe (Grèce). Comptes Rendus. Geoscience 336(4-5): 375-383

Xu, S.A.; Tjong, S.C. 2000: Deformation mechanisms and fracture toughness of polystyrene/high-density polyethylene blends compatibilized by triblock copolymer. Journal of Applied Polymer Science 77(9): 2024-2033

Wyatt, Z.W.; Joost, W.J.; Zhu, D.; Ankem, S. 2012: Deformation mechanisms and kinetics of time-dependent twinning in an α-titanium alloy. International Journal of Plasticity 39: 119-131

Hristov, V.N.; Vasileva, S.; Krumova, M.; Lach, R.; Michler, G.H. 2004: Deformation mechanisms and mechanical properties of modified polypropylene/wood fiber composites. Polymer Composites 25(5): 521-526

Savage, M.F.; Tatalovich, J.; Zupan, M.; Hemker, K.J.; Mills, M.J. 2001: Deformation mechanisms and microtensile behavior of single colony Ti-6242Si. Icsma-12: International Conference on the Strength of Materials 319/21: 398-403

Stanford, N.; Sotoudeh, K.; Bate, P.S. 2011: Deformation mechanisms and plastic anisotropy in magnesium alloy AZ31. Acta Materialia 59(12): 4866-4874

Bartczak, Z.; Argon, A.S.; Cohen, R.E. 1992: Deformation mechanisms and plastic resistance in single-crystal-textured high-density polyethylene. Macromolecules 25(19): 5036-5053

Morris, M.A.; Li, Y.G. 1995: Deformation mechanisms and slip transfer in a Ti-44Al-2Mo alloy. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 197(2): 133-145

Kuznetsov, V.N.; Shalayev, V.I.; Yushkov, V.I. 1991: Deformation mechanisms and texture change of steel Kh16N15M3B during creep. Physics of Metals and Metallography 71(3): 162-170

Larin, S.A.; Perevezentsev, V.N.; Chuvildeev, V.N. 1992: Deformation mechanisms and the rheology of superplastic flow over a wide range of strain rates. I: A description of the superplastic flow model. Physics of Metals and Metallography 73(6): 583-586

Larin, S.A.; Perevezentsev, V.N.; Chuvildeev, V.N. 1992: Deformation mechanisms and the rheology of superplastic flow over a wide range of strain rates. II: The rheology of superplastic flow. Physics of Metals and Metallography 73(6): 587-591

Stachurski, Z.H. 1997: Deformation mechanisms and yield strength in amorphous polymers. Progress in Polymer Science 22(3): 407-474

Viswanathan, G.B.; Sarosi, P.M.; Whitis, D.H.; Mills, M.J. 2005: Deformation mechanisms at intermediate creep temperatures in the Ni-base superalloy René 88 DT. Mater. Sci. Eng. A Struct. Mater. Prop. Microstruct. Proces 400-01: 489-495

Chang, L.; Zhang, L.C. 2009: Deformation mechanisms at pop-out in monocrystalline silicon under nanoindentation. Acta Materialia 57(7): 2148-2153

Guiu, A.; Shanahan, M.E.R. 2003: Deformation mechanisms at the interface between grafted polyethylene and ethylene/vinyl alcohol copolymer. The Journal of Adhesion 79(5): 419-442

Routh, A.F.; Russel, W.B. 2001: Deformation mechanisms during latex film formation : Experimental evidence. Industrial and Engineering Chemistry Research 40(20): 4302-4308

Hsiao, I.C.; Huang, J.C. 2002: Deformation mechanisms during low- and high-temperature superplasticity in 5083 Al-Mg alloy. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science 33(5): 1373-1384

Roy, S.; Suwas, S. 2013: Deformation mechanisms during superplastic testing of Ti―6Al―4V―0.1B alloy. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 574: 205-217

Liauo, C.S.; Huang, J.C. 1999: Deformation mechanisms for AC8A/Al2O3(sf) composites over wide ranges of temperature and strain rate. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 271(1-2): 79-90

Gomezgarcia, D.; Martinezfernandez, J.; Dominguezrodriguez, A.; Eveno, P.; Castaing, J. 1996: Deformation mechanisms for high-temperature creep of high yttria content stabilized zirconia single crystals. Acta Materialia 44(3): 991-999

Wiezorek, J.M.K.; Deluca, P.M.; Mills, M.J.; Fraser, H.L. 1997: Deformation mechanisms in a binary Ti-48 at.%Al alloy with lamellar microstructure. Philosophical Magazine Letters 75(5): 271-280

Ravindran, C.; Chaturvedi, M.C. 1984: Deformation mechanisms in a Co-Ni-Cr-base superalloy containing Nb and Al. Canadian Metallurgical Quarterly 23(3): 327-331

Belyakov, A.N.; Kaibyshev, R.O. 1995: Deformation mechanisms in a high-chromium ferritic steel. II: Observation of deformation relief and theoretical analysis. Physics of Metals and Metallography 79(2): 216-223

Belyakov, A.N.; Kaibyshev, R.O. 1995: Deformation mechanisms in a high-chromium ferritic steel. III: Deformation mechanisms and microstructure evolution. Physics of Metals and Metallography 79(2): 224-228

Zhang, W.J.; Liu, Z.C.; Chen, G.L.; Kim, Y.W. 1999: Deformation mechanisms in a high-Nb containing γ-TiAl alloy at 900°C. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 271(1-2): 416-423

Cao, F.; Pollock, T.M. 2007: Deformation mechanisms in a Ru-Ni-Al ternary B2 intermetallic alloy. Acta Materialia 55(8): 2715-2727

Gloanec, A.L.; Bilotta, G.; Gerland, M. 2013: Deformation mechanisms in a TiNi shape memory alloy during cyclic loading. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 564: 351-358

Yan, F.K.; Tao, N.R.; Archie, F.; Gutierrezurrutia, I.; Raabe, D.; Lu, K. 2014: Deformation mechanisms in an austenitic single-phase duplex microstructured steel with nanotwinned grains. Acta Materialia 81: 487-500

Mezagarcia, E.; Dobron, P.; Bohlen, J.; Letzig, D.; Chmelik, F.; Lukac, P.; Kainer, K.U. 2007: Deformation mechanisms in an AZ31 cast magnesium alloy as investigated by the acoustic emission technique. International Symposium on Physics of Materials 462(1-2): 297-301

Niimi, K.; Morii, K.; Nakayama, Y. 1992: Deformation mechanisms in an (α + α2) two-phase Ti-15 at.% Al alloy at elevated temperatures. Zeitschrift für Metallkunde 83(5): 319-323

Sabirov, I.; Barnett, M.R.; Estrin, Y.; Timokhina, I.; Hodgson, P.D. 2009: Deformation mechanisms in an ultra-fine grained Al alloy. Int. J. Mater. Res 100(12): 1679-1685

Linderov, M.; Segel, C.; Weidner, A.; Biermann, H.; Vinogradov, A. 2014: Deformation mechanisms in austenitic TRIP/TWIP steels at room and elevated temperature investigated by acoustic emission and scanning electron microscopy. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 597: 183-193

Gerrits, N.S.J.A.; Young, R.J. 1991: Deformation mechanisms in biaxially drawn polyethylene. Journal of Polymer Science. Part B. Polymer Physics 29(7): 825-835

Mastorakos, I.N.; Abdolrahim, N.; Zbib, H.M. 2010: Deformation mechanisms in composite nano-layered metallic and nanowire structures. International Journal of Mechanical Sciences 52(2): 295-302

Trice, R.W.; Prine, D.W.; Faber, K.T. 2000: Deformation mechanisms in compression-loaded, stand-alone plasma-sprayed alumina coatings. Journal of the American Ceramic Society 83(12): 3057-3064

Ghoniem, N.M.; Po, G.; Sharafat, S. 2013: Deformation mechanisms in ferritic/martensitic steels and the impact on mechanical design. J. Nucl. Mater 441(1-3): 704-712

Morris, M.A. 1997: Deformation mechanisms in fine-grained Ti-Al alloys. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 224(1-2): 12-20

Dou, R.; Derby, B. 2011: Deformation mechanisms in gold nanowires and nanoporous gold. Philosophical Magazine (2003. Print) 91(7-9): 1070-1083

Evans, J.P. 1988: Deformation mechanisms in granitic rocks at shallow crustal levels - Les mécanismes de déformation dans les roches granitiques, à des niveaux superficiels de la croûte. Journal of Structural Geology 10(5): 437-443

Holzer, S.; Ganss, M.; Schneider, K.; Knoll, K.; Weidisch, R. 2013: Deformation mechanisms in lamellar S―S/B―S triblock copolymers. European Polymer Journal 49(1): 261-269

Evans, D.J.; Scheltens, F.J.; Woodhouse, J.B.; Fraser, H.L. 1997: Deformation mechanisms in MoSi2 at temperatures above the brittle-to-ductile transition temperature. I. Polycrystalline MoSi2. Philosophical Magazine. A. Physics of Condensed Matter. Structure, Defects and Mechanical Properties 75(1): 1-15

Evans, D.J.; Scheltens, F.J.; Woodhouse, J.B.; Fraser, H.L. 1997: Deformation mechanisms in MoSi2 at temperatures above the brittle-to-ductile transition temperature. II. Single-crystal MoSi2. Philosophical Magazine. A. Physics of Condensed Matter. Structure, Defects and Mechanical Properties 75(1): 17-30

Mohamed, F.A.; Yang, H. 2010: Deformation Mechanisms in Nanocrystalline Materials. Metall. Mater. Trans., A Phys. Metall. Mater. Sci 41(4): 823-837

Van Petegem, S.; Li, L.; Anderson, P.M.; Van Swygenhoven, H. 2013: Deformation mechanisms in nanocrystalline metals: Insights from in-situ diffraction and crystal plasticity modelling. Thin Solid Films 530: 20-24

Ivanisenko, Y.; Kurmanaeva, L.; Weissmueller, J.; Yang, K.; Markmann, J.; Rosner, H.; Scherer, T.; Fecht, H.J. 2009: Deformation mechanisms in nanocrystalline palladium at large strains. Acta Materialia 57(11): 3391-3401

Axter, S.E.; Polonis, D.H. 1984: Deformation mechanisms in Ni-Ta-Fe-Al dispersion alloys containing ordered γ' and γ″ precipitates - Mécanismes de déformation dans les alliages à dispersion Ni-Ta-Fe-Al contenant des précipités ordonnés γ' et γ″. Metallography 17(1): 57-75

Majumdar, B.; Keskkula, H.; Paul, D.R. 1994: Deformation mechanisms in nylon 6/ABS blends. Journal of Polymer Science. Part B. Polymer Physics 32(12): 2127-2133

Morris, D.G.; Morris, M.A.; Biselli, C. 1989: Deformation mechanisms in ordered Cu2NiZn: the role of elastic and antiphase boundary energy anisotropies - Mécanismes de déformation dans Cu2NiZn ordonné: rôle des anisotropies élastique et l'énergie des domaines d'antiphase. Philosophical Magazine. A. Physics of Condensed Matter. Defects and Mechanical Properties 60(6): 607-630

Young, R.J.; Eichhom, S.J. 2007: Deformation mechanisms in polymer fibres and nanocomposites. Polymer (Guildford) 48(1): 2-18

Loyens, W.; Groeninckx, G. 2003: Deformation mechanisms in rubber toughened semicrystalline polyethylene terephthalate. Polymer (Guildford) 44(17): 4929-4941

Hashimoto, N.; Zinkle, S.J.; Rowcliffe, A.F.; Robertson, J.P.; Jitsukawa, S. 2000: Deformation mechanisms in 316 stainless steel irradiated at 60°C and 330°C. J. Nucl. Mater 283-87: 528-534

Kulas, M.A.; Green, W.P.; Taleff, E.M.; Krajewski, P.E.; Mcnelley, T.R. 2005: Deformation mechanisms in superplastic AA5083 materials. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science 36(5): 1249-1261

Satoh, Y.; Yoshiie, T.; Mori, H.; Kiritani, M. 2003: Deformation mechanisms in tensile fracture of Al foils containing Si precipitates. Symposium on High-Speed Plastic Deformation 350(1-2): 44-52

Matin, A.; Mazumdar, S. 2009: Deformation mechanisms in the frontal Lesser Himalayan Duplex in Sikkim Himalaya, India. Journal of Earth System Science 118(4): 379-390

Court, S.A.; Vasudevan, V.K.; Fraser, H.L. 1990: Deformation mechanisms in the intermetallic compound TiAl - Mécanisme de déformation du composé intermétallique TiAl. Philosophical Magazine. A. Physics of Condensed Matter. Defects and Mechanical Properties 61(1): 141-158

Dikovits, M.; Poletti, C.; Warchomicka, F. 2014: Deformation Mechanisms in the Near-β Titanium Alloy Ti-55531. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science 45(3): 1586-1596

Johnson, A.J.; Kumar, K.S.; Briant, C.L. 2003: Deformation mechanisms in Ti-6Al-4V/TiC composites. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science 34(9): 1869-1877

Carvalho, N.J.M.; De Hosson, J.T.M. 2006: Deformation mechanisms in TiN/(Ti,Al)N multilayers under depth-sensing indentation. Acta Materialia 54(7): 1857-1862

Lin, C.L.; Chao, C.G.; Juang, J.Y.; Yang, J.M.; Liu, T.F. 2014: Deformation mechanisms in ultrahigh-strength and high-ductility nanostructured FeMnAlC alloy. Journal of Alloys and Compounds 586: 616-620

Gallardolopez, A.; Gomezgarcia, D.; Dominguezrodriguez, A. 2010: Deformation mechanisms in yttria-stabilized cubic zirconia single crystals. International Workshop 101(10): 1211-1214

Roa, J.J.; Fargas, G.; Jimenezpique, E.; Mateo, A. 2014: Deformation mechanisms induced under high cycle fatigue tests in a metastable austenitic stainless steel. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 597: 232-236

Wu, Z.X.; Zhang, Y.W.; Srolovitz, D.J. 2011: Deformation mechanisms, length scales and optimizing the mechanical properties of nanotwinned metals. Acta Materialia 59(18): 6890-6900

Coghe, F.; Rabet, L.; Kestens, L. 2006: Deformation mechanisms of a commercial titanium alloy Ti6Al4V as a function of strain rate and initial texture. J. Phys., Iv 134: 845-850

Marmy, P.; Martin, J.L.; Victoria, M. 1993: Deformation mechanisms of a ferritic-martinsitic steel between 290 and 870 K. European Research Conference on Plasticity of Materials 164(1-2): 159-163

Shen, Y.F.; Wang, Y.D.; Liu, X.P.; Sun, X.; Lin Peng, R.; Zhang, S.Y.; Zuo, L.; Liaw, P.K. 2013: Deformation mechanisms of a 20Mn TWIP steel investigated by in situ neutron diffraction and TEM. Acta Materialia 61(16): 6093-6106

Lei, Z.H.A.N.G.; Liu, C.G.; Wang, H.Y.; Nan, X.L.; Wu, Z.Q.; Jiang, Q.C. 2013: Deformation mechanisms of a rolled Mg―6Al―3Sn alloy during plane strain compression. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 578: 362-369

Rugg, K.L.; Cox, B.N. 2004: Deformation mechanisms of dry textile preforms under mixed compressive and shear loading. Journal of Reinforced Plastics and Composites 23(13): 1425-1442

Youqi, W.A.N.G.; Changjie, S.U.N.; Zhou, E.; Ji, S.U. 2004: Deformation mechanisms of electrostrictive graft elastomer. Smart Materials and Structures 13(6): 1407-1413

Yongchin, Y.A.N.G.; Geil, P.H. 1985: Deformation mechanisms of isotactic poly(1-butene). die Makromolekulare Chemie 186(9): 1961-1978

Pramanik, A.; Zhang, L.C.; Arsecularatne, J.A. 2008: Deformation mechanisms of MMCs under indentation. Composites Science and Technology 68(6): 1304-1312

Ling, C.H.E.N.; Wong, S.C.; Tianxi, L.I.U.; Xuehong, L.U.; Chaobin, H.E. 2004: Deformation mechanisms of nanoclay-reinforced maleic anhydride-modified polypropylene. Journal of Polymer Science. Part B. Polymer Physics 42(14): 2759-2768

Mahapatra, R.; Girshick, A.; Pope, D.P.; Vitek, V. 1995: Deformation mechanisms of near-stoichiometric single phase TiAl single crystals : a combined experimental and atomistic modeling study. Scripta Metallurgica et Materialia 33(12): 1921-1927

Sharif, A.A.; Misra, A.; Mitchell, T.E. 2003: Deformation mechanisms of polycrystalline MoSi2 alloyed with 1 at.% Nb. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 358(1-2): 279-287

Song, Y.; Nitta, K.H.; Nemoto, N. 2003: Deformation mechanisms of polymer thin films by simultaneous kinetic measurement of microscopic infrared dichroism and macroscopic stress. 2. Molecular orientation during necking process of isotactic polypropylene. Macromolecules 36(6): 1955-1961

Scholtyssek, S.; Pfeifer, F.; Seydewitz, V.; Adhikari, R.; Siesler, H.W.; Michler, G.H. 2012: Deformation Mechanisms of Polypropylene/Polystyrene Multilayered Films. Journal of Applied Polymer Science 126(5): 1593-1599

Cheung, C.Y.; Cebon, D. 1997: Deformation mechanisms of pure bitumen. Journal of Materials in Civil Engineering 9(3): 112-129

Michler, G.H.; Godehardt, R. 2000: Deformation mechanisms of semi-crystalline polymers on the submicron scale. Crystal Research and Technology (1979) 35(6-7): 863-875

Gassilloud, R.; Ballif, C.; Gasser, P.; Buerki, G.; Michler, J. 2005: Deformation mechanisms of silicon during nanoscratching. Physica Status Solidi. A. Applied Research 202(15): 2858-2869

Perezprado, M.T.; Cristina, M.C.; Ruano, O.; Gonzalezdoncel, G. 2000: Deformation mechanisms of superplastic Al-Li 8090 alloy examined by X-ray texture measurements. Materials Transactions - Jim 41(11): 1562-1568

Wright, W.J.; Saha, R.; Nix, W.D. 2001: Deformation mechanisms of the Zr40Ti14Ni10Cu12Be24 bulk metallic glass. Mater. Trans. - Jim 42(4): 642-649

Manero, J.M.; Gil, F.J.; Planell, J.A. 2000: Deformation mechanisms of Ti-6Al-4V alloy with a martensitic microstructure subjected to oligocyclic fatigue. Acta Materialia 48(13): 3353-3359

Xie, Z.H.; Hoffman, M.; Munroe, P.; Bendavid, A.; Martin, P.J. 2008: Deformation mechanisms of TiN multilayer coatings alternated by ductile or stiff interlayers. Acta Materialia 56(4): 852-861

Pink, E.; Kumar, S. 1997: Deformation mechanisms operating in a tungsten heavy alloy. Icsma 11: International Conference on the Strength of Materials 234-236: 102-105

Urai, J.L.; Spiers, C.J.; Peach, C.J.; Franssen, R.C.M.W.; Liezenberg, J.L. 1987: Deformation mechanisms operating in naturally deformed halite rocks as deduced from microstructural investigations - Mécanismes de déformation opérant dans des roches halitiques naturellement déformées déduits d'études microstructurales. Geologie en Mijnbouw 66(2): 165-176

Del Valle, J.A.; Perezprado, M.T.; Ruano, O.A. 2005: Deformation mechanisms responsible for the high ductility in a Mg AZ31 alloy analyzed by electron backscattered diffraction. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science 36(6): 1427-1438

Xiuqin, Z.H.A.N.G.; Schneider, K.; Guoming, L.I.U.; Jianhong, C.H.E.N.; Bruning, K.; Dujin, W.A.N.G.; Stamm, M. 2012: Deformation-mediated superstructures and cavitation of poly (L-lactide): In-situ small-angle X-ray scattering study. Polymer (Guildford) 53(2): 648-656

Bradbury, A.; Goodwin, J.W.; Hughes, R.W. 1992: Deformation, melting, and relaxation of structured colloidal dispersions. Langmuir 8(12): 2863-2872

Yunxing, C.A.O.; Mitchell, G.D.; Davis, A.; Darning, W.A.N.G. 2000: Deformation metamorphism of bituminous and anthracite coals from China. Int. J. Coal Geol 43(1-4): 227-242

Cox, S.F.; Etheridge, M.A. 1984: Deformation microfabric development in chalcopyrite in fault zones, Mt. Lyell, Tasmania - Développement de microstructures de déformation dans la chalcopyrite des zones de failles, Mont Lyell, Tasmanie. Journal of Structural Geology 6(1-2): 167-182

Andrews, M.C.; Day, R.J.; Patrikis, A.K.; Young, R.J. 1994: Deformation micromechanics in aramid/epoxy composites. Composites 25(7): 745-751

Andrews, M.C.; Day, R.J.; Hu, X.; Young, R.J. 1993: Deformation micromechanics in high-modulus fibres and composites. Microphenomena in Advanced Composites. International Conference 48(1-4): 255-261

Young, R.J.; Andrews, M.C. 1994: Deformation micromechanics in high-performance polymer fibres and composites. Materials into the 21st Century. International Conference 184(2): 197-205

Young, R.J.; Andrews, M.C.; Rallis, N. 1996: Deformation micromechanics in high-volume-fraction aramid/epoxy composites. International Conference on Interfacial Phenomena in Composite Materials 27(9): 889-894

So, C.L.; Young, R.J. 1997: Deformation micromechanics in poly(p-phenylene benzobisoxazole) fibre reinforced epoxy composites. Plast. Rubber Compos. Process. Appl 26(10): 423-429

Kong, K.; Hejda, M.; Young, R.J.; Eichhorn, S.J. 2009: Deformation micromechanics of a model cellulose/glass fibre hybrid composite. Composites Science and Technology 69(13): 2218-2224

Gonzalezchi, P.I.; Young, R.J. 2007: Deformation micromechanics of a thermoplastic-thermoset fiber-matrix interface using the single fiber composite test. Journal of Composite Materials 41(9): 1087-1099

Hejda, M.; Kong, K.; Young, R.J.; Eichhorn, S.J. 2008: Deformation micromechanics of model glass fibre composites. Composites Science and Technology 68(3-4): 848-853

Mottershead, B.; Eichhorn, S.J. 2007: Deformation micromechanics of model regenerated cellulose fibre-epoxy/polyester composites. Composites Science and Technology 67(10): 2150-2159

Eichhorn, S.J.; Young, R.J. 2003: Deformation micromechanics of natural cellulose fibre networks and composites. International Ecocomp Conference 1 63(9): 1225-1230

Hamad, W.Y.; Eichhorn, S. 1997: Deformation micromechanics of regenerated cellulose fibers using Raman spectroscopy. J. Eng. Mater. Technol 119(3): 309-313

Tsuji, N.; Shinmiya, T.; Saito, Y.; Muraki, M. 1998: Deformation microstructure and nucleation of recrystallization in hot-deformed single crystals of 18% Cr ferritic steel. Isij International 38(4): 380-389

Liu, Q.; Hansen, N. 1995: Deformation microstructure and orientation of FCC crystals. Phys. Status Solidi, A, Appl. Res 149(1): 187-199

Tagashira, S.; Sakai, K.; Furuhara, T.; Maki, T. 2000: Deformation microstructure and tensile strength of cold rolled pearlitic steel sheets. Isij International 40(11): 1149-1155

Vernonparry, K.D.; Furu, T.; Jensen, D.J.; Humphreys, F.J. 1996: Deformation microstructure and texture in hot worked aluminium alloys. Materials Science and Technology 12(11): 889-896

Zhang, W.J.; Evangelista, E.; Francesconi, L.; Chen, G.L. 1996: Deformation microstructure of Nb-modified TiAl intermetallics Ti54Al16Nb at ambient temperature. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 207(2): 202-207

Hashimoto, N.; Byun, T.S.; Farrell, K.; Zinkle, S.J. 2004: Deformation microstructure of neutron-irradiated pure polycrystalline metals. J. Nucl. Mater 329-33: 947-952

Hashimoto, N.; Byun, T.S.; Farrell, K.; Zinkle, S.J. 2005: Deformation microstructure of neutron-irradiated pure polycrystalline vanadium. Journal of Nuclear Materials 336(2-3): 225-232

Sun, J.; Lee, C.S.; Lai, J.K.L. 1997: Deformation microstructure of Ni3Al intermetallic compound macroalloyed with Pd. Materials Letters (General Ed.) 31(1-2): 1-4

Jiao, Z.; Busby, J.T.; Was, G.S. 2007: Deformation microstructure of proton-irradiated stainless steels. J. Nucl. Mater 361(2-3): 218-227

Decamps, B.; Brien, V.; Morton, A.J. 1994: Deformation microstructures after low-cycle fatigue at 950°C in Ni-based superalloys : the effect of test conditions. Scripta Metallurgica et Materialia 31(7): 793-798

Zhou, H.; Ro, Y.; Harada, H.; Aoki, Y.; Arai, M. 2004: Deformation microstructures after low-cycle fatigue in a fourth-generation Ni-base SC superalloy TMS-138. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 381(1-2): 20-27

Hughes, D.A. 2001: Deformation microstructures and selected examples of their recrystallization. Surface and Interface Analysis 31(7): 560-570

Chang, W.A.N.G.; Wenquan, C.A.O.; Jie, S.H.I.; Chongxiang, H.U.A.N.G.; Han, D.O.N.G. 2013: Deformation microstructures and strengthening mechanisms of an ultrafine grained duplex medium-Mn steel. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 562: 89-95

Barnett, M.R.; Nave, M.D.; Bettles, C.J. 2004: Deformation microstructures and textures of some cold rolled Mg alloys. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 386(1-2): 205-211

Brimhall, J.L.; Cole, J.I.; Bruemmer, S.M. 1994: Deformation microstructures in ion-irradiated stainless steel. Scripta Metallurgica et Materialia 30(11): 1473-1478

Kruml, T.; Martin, J.L.; Viguier, B.; Bonneville, J.; Spatig, P. 1998: Deformation microstructures in Ni3(Al, Hf). Mater. Sci. Eng. A Struct. Mater. Prop. Microstruct. Proces 239-40: 174-179

Aoki, M.; Saito, H.; Mori, M.; Ishida, Y.; Nagumo, M. 1994: Deformation microstructures of a low carbon steel characterized by tritium autoradiography and thermal desorption spectroscopy. Nippon Kinzoku Gakkaishi (1952) 58(10): 1141-1148

Kangmin, C.H.E.N.; Chenchao, Z.H.E.N.G.; Zhizhong, Y.U.A.N.; Jinzhong, L.U.; Xudong, R.E.N.; Xinmin, L.U.O. 2013: Deformation microstructures of austenitic stainless steel 2Cr13Mn9Ni4 under ultrafast strain rate by laser shock processing. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 587: 244-249

Chaudhuri, K.; Das, S. 1993: Deformation microstructures of Ti-52 at.% Al-3 at% V alloy. Philosophical Magazine Letters 67(3): 143-150

Das, S.; Chaudhuri, K. 1995: Deformation microstructures of γ-TiAi in the Ti-46Al-2V alloy. Scripta Metallurgica et Materialia 32(2): 201-206

Segal, V.M. 2005: Deformation mode and plastic flow in ultra fine grained metals. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 406(1-2): 205-216

Pirouz, P. 1987: Deformation mode in silicon, slip or twinning?. Scripta Metallurgica 21(11): 1463-1468

Farrell, K.; Byun, T.S.; Hashimoto, N. 2004: Deformation mode maps for tensile deformation of neutron-irradiated structural alloys. Journal of Nuclear Materials 335(3): 471-486

Romenskii, E.I. 2007: Deformation model for brittle materials and the structure of failure waves. Journal of Applied Mechanics and Technical Physics 48(3): 437-444

Panasyuk, V.V.; Luchko, I.I.; Panko, I.N. 2003: Deformation model of fracture in concrete. Strength of Materials 35(2): 114-121

Canova, G.R.; Wenk, H.R.; Molinari, A. 1992: Deformation modelling of multi-phase polycrystals : case of a quartz-mica aggregate. Acta Metallurgica et Materialia 40(7): 1519-1530

Hutchinson, B.; Barnett, M.R.; Ghaderi, A.; Cizek, P.; Sabirov, I. 2009: Deformation modes and anisotropy in magnesium alloy AZ31. International Journal of Materials Research 100(4): 556-563

Sauer, J.A.; Chen, C.C. 1984: Deformation modes and fatigue behavior in styrene-a-crylonitrile and acrylonitrile-butadiene-styrene copolymers. Polymer Engineering and Science 24(10): 786-797

Li, F.; Chu, G.N.; Lin, J.F.; Yuan, S.J. 2009: Deformation modes coupled analysis in the forging process of disc-shaped components. Proceedings of the Institution of Mechanical Engineers. Part B. Journal of Engineering Manufacture 223(11): 1497-1503

Zaretsky, E.; Igra, O.; Zhuk, A.Z.; Lash, A.A. 1997: Deformation modes in fiberglass under weak impact. Journal of Reinforced Plastics and Composites 16(4): 321-331

Myasnikova, L.P.; Marikhin, V.A.; Ivankova, E.M.; Yakushev, P.N. 2001: Deformation modes in oriented polymers. J. Macromol. Sci., Phys 40(3-4): 473-483

Indenbom, V.L.; Orlov, A.N. 1984: Deformation modes in plasticity and fracture. Crystal Research and Technology (1979) 19(6): 733-746

Sugiyama, H.; Gerstmayr, J.; Shabana, A.A. 2006: Deformation modes in the finite element absolute nodal coordinate formulation. Journal of Sound and Vibration 298(4-5): 1129-1149

Mecking, H.; Hartig, C.; Kocks, U.F. 1996: Deformation modes in γ-TiAl as derived from the single crystal yield surface. Acta Materialia 44(4): 1309-1321

Nhokwang, P.A.R.K.; Byunghoon, K.I.M.; Sanglae, L.E.E. 1993: Deformation modes of a Ni-base superalloy under compression. Scripta Metallurgica et Materialia 29(1): 117-122

Djaziri, S.; Faurie, D.; Le Bourhis, E.; Goudeau, P.; Renault, P.O.; Mocuta, C.; Thiaudiere, D.; Hild, F. 2013: Deformation modes of nanostructured thin film under controlled biaxial deformation. Thin Solid Films 530: 30-34

Ma, X.; Sauer, J.A.; Hara, M. 1996: Deformation modes of poly(styrene-co-sodium methacrylate) ionomers. Polymer (Guildford) 37(21): 4739-4745

Bailat, C.; Groschel, F.; Victoria, M. 2000: Deformation modes of proton and neutron irradiated stainless steels. J. Nucl. Mater 276: 283-288

Yong, X.I.A.; Peng, Z.H.A.N.G.; Ni, Y.Q.; Zhu, H.P. 2014: Deformation monitoring of a super-tall structure using real-time strain data. Engineering Structures 67: 29-38

Gernhardt, S.; Bamler, R. 2012: Deformation monitoring of single buildings using meter-resolution SAR data in PSI. Isprs Journal of Photogrammetry and Remote Sensing 73: 68-79

Xuguo, S.H.I.; Lu, Z.H.A.N.G.; Mingsheng, L.I.A.O.; Balz, T. 2014: Deformation monitoring of slow-moving landslide with L- and C-band SAR interferometry. Remote Sensing Letters 5(10-12): 951-960

Blick, G.H.; Read, S.A.L.; Hall, P.T. 1989: Deformation monitoring of the Ostler Fault zone, south Island, New Zealand - Instrumentation des déformations de la zone de faille Ostler, Nouvelle Zélande Ile Sud. International Union of Geodesy and Geophysics. General Assembly 19. Iaspei Symposium on Earthquake Hazard Assessment and Prediction (Vancouver 1987) 167(2-4): 329-339

Koerner, H.; Weidong, L.I.U.; Alexander, M.; Mirau, P.; Dowty, H.; Vaia, R.A. 2005: Deformation-morphology correlations in electrically conductive carbon nanotube-thermoplastic polyurethane nanocomposites. Polymer (Guildford) 46(12): 4405-4420

Danilov, V.I.; Barannikova, S.A.; Zuev, L.B.; Kireeva, I.V. 1997: Deformation nonuniformity in single crystals of a high-nitrogen steel. Physics of Metals and Metallography 83(1): 95-99

Ikeda, T.; Raja, S.; Ueda, T. 2010: Deformation of a Beam with Partially Debonded Piezoelectric Actuators. Journal of Intelligent Material Systems and Structures 21(4): 453-468

Lee, C.S.; Margolin, H. 1986: Deformation of a Burgers oriented bimetallic bicrystal of alpha-beta (Ti-13Mn) - Verformung eines Burgers-orientierten bimetallischen Alpha-Beta (Ti-13 Mn)Bikristalls. Metallurgical Transactions. A, Physical Metallurgy and Materials Science 17A (3): 451-560

Pieper, G.; Rehage, H.; Barthesbiesel, D. 1998: Deformation of a capsule in a spinning drop apparatus. Journal of Colloid and Interface Science 202(2): 293-300

Lac, E.; Barthesbiesel, D. 2005: Deformation of a capsule in simple shear flow : Effect of membrane prestress. Physics of Fluids (1994) 17(7): 072105.1-072105.8

Kuimov, K.V.; Kuzmin, A.V.; Sorokin, F.D. 2002: Deformation of a circular photographic plate in a schmidt telescope with incomplete contact between the plate and its spherical support. Mechanics of Solids 37(3): 129-133

Dimitrakopoulos, P. 2007: Deformation of a droplet adhering to a solid surface in shear flow : onset of interfacial sliding. Journal of Fluid Mechanics 580: 451-466

Grigorenko, Y.M.; Kasyan, Y.B. 2001: Deformation of a flexible noncircular long cylindrical shell under a nonuniform load. International Applied Mechanics 37(3): 346-351

Yokoyama, M.; Mochizuki, O. 2009: Deformation of a fluid-filled compliant cylinder in a uniform flow. Journal of Fluids and Structures 25(6): 1049-1064

Tryggvason, G. 1988: Deformation of a free surface as a result of vortical flows. The Physics of Fluids 31(5): 955-957

David, M.O.; Reiter, G.; Sitthai, T.; Schultz, J. 1998: Deformation of a glassy polymer film by long-range intermolecular forces. Langmuir 14(20): 5667-5672

Post, D.; Czarnek, R.; Duksung, J.O.H.; Jinmyun, J.O.; Yifan, G.U.O. 1987: Deformation of a metal-matrix tensile coupon with a central slot: an experimental study. Journal of Composites Technology and Research 9(1): 3-9

Van Loon, A.J. 2006: Deformation of a modern alluvial plain. Geomorphology (Amsterdam) 78(3-4): 351-358

Sarva Jit, S.I.N.G.H.; Kumar, A.; Singh, J. 2003: Deformation of a monoclinic elastic half-space by a long inclined strike-slip fault. Iset Journal of Earthquake Technology 40(1): 51-59

Zhe, J.I.N.; Gray, G.T.; Yamaguchi, M. 2000: Deformation of a 45°<321> oriented polysynthetically twinned TiAl crystal at high strain rate and high temperature. Philosophical Magazine. A. Physics of Condensed Matter. Structure, Defects and Mechanical Properties 80(1): 49-68

Noda, N.; Kimura, S. 1998: Deformation of a piezothermoelectric composite plate considering the coupling effect. Journal of Thermal Stresses 21(3-4): 359-379

Basu, A.J.; Lardner, T.J. 1985: Deformation of a planar sinusoidal elastic beam. Zeitschrift für Angewandte Mathematik und Physik 36(3): 460-474

Nandy, T.K.; Feng, Q.; Pollock, T.M. 2003: Deformation of a platinum-containing RuAl intermetallic by <111> dislocations. Scripta Materialia 48(8): 1087-1092

Ortiz, C.; Kim, R.; Rodighiero, E.; Ober, C.K.; Kramer, E.J. 1998: Deformation of a polydomain, liquid crystalline epoxy-based thermoset. Macromolecules 31(13): 4074-4088