Experimental investigations on heat transfer from suspension to impact separators in the riser column of a circulating fluidized bed combustor
Winaya, N.S.; Basu, P.; Reddy, B.V.
International Journal of Heat and Mass Transfer 46(1): 71-75
2003
ISSN/ISBN: 0017-9310 Accession: 075386049
PDF emailed within 1 workday: $29.90
Related References
Reddy, B.V.; Nag, P.K. 2001: Effect of riser exit geometry on bed hydrodynamics and heat transfer in a circulating fluidized bed riser column International Journal of Energy Research 25(1): 1-8Ziegelhoeffer A.; De Jong J.W.; Ferrari R.; Turi Nagy L. 1989: Suspension-to-Surface heat transfer in a circulating-fluidized-bed combustor Aiche Journal 35(10): 1685-1691
Golriz, M.R. 1996: Suspension-to-wall heat transfer in a 12-MWth circulating fluidized-bed combustor International Journal of Energy Research 20(7): 569-579
Luan, W.; Bowen, B.D.; Lim, C.J.; Brereton, C.M.H.; Grace, J.R. 2000: Suspension-to-membrane-wall heat transfer in a circulating fluidized bed combustor International Journal of Heat and Mass Transfer 43(7): 1173-1185
Rui Zhang; Animesh Dutta; Prabir Basu 2006: Heat transfer to the ceiling of the riser of a circulating fluidized bed Chemical Engineering Science 61(17): 5907-5911
Sundaresan, R.; Ajit Kumar, K.O.L.A.R. 2013: Axial heat transfer correlations in a circulating fluidized bed riser Applied Thermal Engineering 50(1): 985-996
Ziegelhoeffer A.; De Jong J.W.; Ferrari R.; Turi Nagy L. 2000: Heat transfer between gassolids suspension and immersed surface in an upflow fluidized bed (riser) Chemical Engineering Science 55(5): 981-989
Ziegelhoeffer A.; De Jong J.W.; Ferrari R.; Turi Nagy L. 2002: Heat transfer characteristics at an axial tube in a circulating fluidized bed riser International Journal of Thermal Sciences 41(7): 673-681
Ma, Y.L.; Zhu, J.X. 2001: Heat Transfer in the Downer and the Riser of a Circulating Fluidized Bed A Comparative Study Chemical Engineering and Technology 24(1): 85-90
Ajit Kumar, K.O.L.A.R.; Sundaresan, R. 2002: Heat transfer characteristics at an axial tube in a circulating fluidized bed riser Int. J. Therm. Sci 41(7): 673-681
Wanchan, W.; Khongprom, P.; Limtrakul, S. 2020: Study of wall-to-bed heat transfer in circulating fluidized bed riser based on CFD simulation Chemical Engineering Research and Design 156: 442-455
Gui Young Han; Yong Jun Cho 1999: Radiative heat transfer in a circulating fluidized bed coal combustor Powder Technology 102(3): 266-273
Nag, P.K.; Sallam Ali, M.; Reddy, B.V. 1993: Heat transfer in a circulating fluidized bed combustor burning indane gas Indian Journal of Technology 31(1): 9-12
Gnanapragasam, N.V.; Reddy, B.V. 2009: Numerical modeling of axial bed-to-wall heat transfer in a circulating fluidized bed combustor International Journal of Heat and Mass Transfer 52(7-8): 1657-1666
Yumin, C.H.A.N.G.; Yufu, L.O.; Mayyenn, C.H.E.N. 1990: Heat transfer measurements of a 1.0 ton-steam/HR circulating fluidized-bed combustor burning Taiwan coals Particulate Science and Technology 8(3-4): 199-208
Jin Hee Jeon; Sang Done Kim; Seung Jae Kim; Yong Kang 2008: Combustion and heat transfer characteristics in a square internally circulating fluidized bed combustor with draft tube Fuel 87(17-18): 3710-3713
Gnanapragasam, N.V.; Reddy, B.V. 2008: Numerical modeling of bed-to-wall heat transfer in a circulating fluidized bed combustor based on cluster energy balance International Journal of Heat and Mass Transfer 51(21-22): 5260-5268
Nirmal Vijay, G.; Reddy, B.V. 2005: Effect of dilute and dense phase operating conditions on bed-to-wall heat transfer mechanism in a circulating fluidized bed combustor International Journal of Heat and Mass Transfer 48(16): 3276-3283
Sirisomboon, K.; Laowthong, P. 2019: Experimental investigation and prediction of heat transfer in a swirling fluidized-bed combustor Applied Thermal Engineering 147: 718-727
Ziegelhoeffer A.; De Jong J.W.; Ferrari R.; Turi Nagy L. 1999: Suspension densities in a high-density circulating fluidized bed riser Chemical Engineering Science 54(22): 5451-5460