Influence of casting conditions on molten steel flow in continuous casting mold at high speed casting of slabs
Teshima, T.; Kubota, J.; Suzuki, M.; Ozawa, K.; Masaoka, T.; Miyahara, S.
Tetsu-To-Hagane 79(5): 576-582
1993
ISSN/ISBN: 0021-1575 Accession: 075916602
PDF emailed within 1 workday: $29.90
Related References
Hanao, M.; Kawamoto, M.; Mizukami, H.; Eanazal, K. 2000: Influence of molten steel flow velocity near the meniscus in continuous casting mold on surface quality of slabs Iron and Steelmaker 27(11): 55-59Zhang, Q.; Wang, L.; Wang, X. 2006: Influence of casting speed variation during unsteady continuous casting on non-metallic inclusions in IF steel slabs Isij International 46(10): 1421-1426
Hanao, M.; Kawamoto, M.; Hara, M.; Murakami, T.; Kikuchi, H.; Hanazaki, K. 2002: Mold flux for high speed continuous casting of hypoperitectic steel slabs Tetsu-To-Hagane 88(1): 23-28
Suzuki, M.; Miyahara, S.; Kitagawa, T.; Uchida, S.; Mori, T.; Okimoto, K. 1992: Effect of mold oscillation curves on heat transfer and lubrication behavoir in mold at high speed continuous casting of steel slabs Tetsu-To-Hagane 78(1): 113-120
Meng, X.; Zhu, M. 2009: Thermal Behavior of Hot Copper Plates for Slab Continuous Casting Mold with High Casting Speed Isij International 49(9): 1356-1361
Nakato, H.; Omiya, S.; Habu, Y.; Emi, T.; Hamagami, K.; Koshikawa, T. 1984: Optimizing mold lubrication for high-speed continuous casting of slabs Journal of Metals (1977) 36(3): 44-50
Whitmore, B.C.; Hlinka, J.W. 1969: Continuous Casting of Low-Carbon Steel Slabs by the Hazelett Strip-Casting Process JOM 21(8): 68-73
Imamura, A.; Husano, A.; Moritama, N. 1992: A hydrodynamical analysis of the molten steel flow in the continuous casting mold Tetsu-To-Hagane 78(3): 439-446
Ho, Y.H.; Hwang, W.S. 1996: The analysis of molten steel flow in billet continuous casting mold Isij International 36(8): 1030-1035
Mahapatra, R.B.; Brimacombe, J.K.; Samarasekera, I.V.; Walker, N.; Paterson, E.A.; Young, J.D. 1991: Mold behavior and its influence on quality in the continuous casting of steel slabs. I : Industrial trials, mold temperature measurements, and mathematical modeling Metallurgical Transactions. B, Process Metallurgy 22(6): 861-874
Miki, Y.; Takeuchi, S. 2003: Internal defects of continuous casting slabs caused by asymmetric unbalanced steel flow in Mold Isij International 43(10): 1548-1555
Liu, Z.Q.; Qi, F.S.; Li, B.K.; Jiang, M.F. 2011: Turbulent Flow of Molten Steel in Thin Slab Continuous Casting Mold Advanced Materials Research 402: 432-435
Badri, A.; Natarajan, T.T.; Snyder, C.C.; Powers, K.D.; Mannion, F.J.; Byrne, M.; Cramb, A.W. 2005: A mold simulator for continuous casting of steel: Part II. The formation of oscillation marks during the continuous casting of low carbon steel Metallurgical and Materials Transactions. B, Process Metallurgy and Materials Processing Science 36(3): 373-383
Okazawa, K.; Sawada, I.; Harada, H.; Toh, T.; Takeuchi, E. 1998: Characteristics of molten steel jet flow in a continuous casting mold with electromagnetic brake technique Tetsu-To-Hagane 84(7): 490-495
Kubo, N.; Ishii, T.; Kubota, J.; Aramaki, N. 2002: Two-phase flow numerical simulation of molten steel and argon gas in a continuous casting mold Isij International 42(11): 1251-1258
Kubo, N.; Kubota, J.; Suzuki, M.; Ishii, T. 2007: Molten steel flow control under electromagnetic level accelerator in continuous casting mold Isij International 47(7): 988-995
Nakato, H.; Ozawa, M.; Kinoshita, K.; Habu, Y.; Emi, T. 1984: Factors affecting the formation of shell and longitudinal cracks in mold during high speed continuous casting of slabs Transactions of the Iron and Steel Institute of Japan 24(11): 957-965
Jin, Y.J.; Cui, X.C.; Zhang, Z. 2011: Effects of U-Shape Inner Cooler on Flow and Solidification of Molten Steel in Slab Continuous Casting Mold Advanced Materials Research 291-294: 423-427
Okamura, H. 1976: Flow of molten metal in denture base in horizontal centrifugal casting procedure. (Part 1) Flow, inflow volume and casting time of molten metal passing through single aprue into disk type mold Shika Rikogaku Zasshi. Journal of the Japan Society for Dental Apparatus and Materials 17(37): 32-43
Zhang, X.; Ren, Y.; Zhang, L. 2018: Influence of Casting Parameters on Hooks and Entrapped Inclusions at the Subsurface of Continuous Casting Slabs Metallurgical and Materials Transactions A 49(11): 5469-5477