Initiation of adiabatic shear failure in a clamped circular plate struck by a blunt projectile
Chen, X.W.; Li, O.M.; Fan, S.C.
International Journal of Impact Engineering 31(7): 877-893
2005
ISSN/ISBN: 0734-743X Accession: 075958512
Full Text Article emailed within 1 workday: $29.90
Related References
Chen, X.W.; Li, Q.M. 2003: Shear plugging and perforation of ductile circular plates struck by a blunt projectile International Journal of Impact Engineering 28(5): 513-536Schwieger, H.; Truppat, V.; Hahn, H. 1976: Central deflection of a transversely struck clamped circular plate Mechanics Research Communications 3(1): 13-19
Chen, L.; Yang, J. 2007: Analytical evaluation of permanent deflection of a thin circular plate struck normally at its center by a projectile Acta Mechanica Solida Sinica 20(2): 117-122
Wen, H.; Jones, N. 1994: Experimental Investigation into the Dynamic Plastic Response and Perforation of a Clamped Circular Plate Struck Transversely by a Mass Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 208(2): 113-137
Liu, J.; Jones, N. 1996: Shear and bending response of a rigid plastic circular plate struck transversely by a mass Mechanics of Structures and Machines 24(3): 361-388
Elsirafy, I.H. 1984: The analysis of clamped wedge shaped plate and plate bounded by two clamped circular ares under isolated force at an arbitrary point Zeitschrift für Angewandte Mathematik und Mechanik 64(8): 369-371
Wilson, P.E.; Boresi, A.P. 1964: Large Deflection of a Clamped Circular Plate Including Effects of Transverse Shear Journal of Applied Mechanics 31(3): 540-541
Chen, X.W.; Yang, Y.B.; Lu, Z.H.; Chen, Y.Z. 2008: Perforation of metallic plates struck by a blunt projectile with a soft nose International Journal of Impact Engineering 35(6): 549-558
Wen, H.M. 1996: Deformation and perforation of clamped work-hardening plates struck transversely by blunt missiles Nuclear Engineering and Design 160(1-2): 51-58
Cloete, T.J.; Nurick, G.N.; Palmer, R.N. 2005: The deformation and shear failure of peripherally clamped centrally supported blast loaded circular plates Isie/5: International Symposium on Impact Engineering 32(1-4): 92-117
Li, Q.M.; Jones, N. 1999: Shear and adiabatic shear failures in an impulsively loaded fully clamped beam International Journal of Impact Engineering 22(6): 589-607
Bassali, W.A.; Mahmood, S.S.; Refai, M.Y. 2007: Singularly Loaded Semi-circular Plate with Clamped Diameter and Free Circular Edge ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik 56(2-3): 101-116
Shen, W.Q.; Jones, N. 1993: Dynamic plastic response and failure of a clamped beam struck transversely by a mass International Journal of Solids and Structures 30(12): 1631-1648
Bassali, W.A.; Mahmood, S.S. 1974: Analysis of Hydrostatically Loaded Semi-Circular Plate with a Clamped Diameter and a Free Circular Edge ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik 54(11): 755-766
Bassali, W.A.; Mahmood, S.S. 1973: Bending of a thin semi‐circular plate elastically restrained along the circular edge and clamped along the diameter Mathematika 20(1): 34-46
Kapuria, S.; Dumir, P.C.; Sengupta, S. 1999: Three dimensional axisymmetric piezothermoelastic solution of clamped circular elastic plate bonded to piezoceramic plate Zeitschrift für Angewandte Mathematik und Mechanik 79(2): 117-129
Wan, K.T. 2002: Adherence of an axisymmetric flat punch onto a clamped circular plate: Transition from a rigid plate to a flexible membrane Journal of Applied Mechanics 69(2): 110-116
Wei Qin, S.H.E.N. 2002: A study on the failure of circular plates struck by masses. Part 2: theoretical analysis for the onset of failure International Journal of Impact Engineering 27(4): 413-432
Liu, J.; Fan, Q.; Cai, H.; Wang, F. 2015: Underlying mechanism of periodical adiabatic shear bands generated in Ti–6Al–4V target by projectile impact Materials-Design 87: 231-237
Timothy, S.P.; Hutchings, I.M. 1985: Initiation and growth of microfractures along adiabatic shear bands in Ti-6Al-4V - Initiation et croissance de microruptures le long des bandes de cisaillement adiabatiques dans Ti-6Al-4V Materials Science and Technology 1(7): 526-530