EurekaMag Full Text Articles Chapter 76,558

Ochiai, S.; Hojo, M.; Tanaka, M. 1999: Mechanical interactions between fiber and cracked coating layer and their influences on fiber strength. International Symposium on Ceramic Matrix Composites 30(4): 451-461

Da Costa, C.E.; Velasco, F.; Torralba, J.M. 2002: Mechanical, intergranular corrosion, and wear behavior of aluminum-matrix composite materials reinforced with nickel aluminides. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science 33(11): 3541-3553

Zhang, X.X.; Ren, J.Y. 2005: Mechanical interleaving assembly of TDICCD focal plane for space camera. Proc. Spie Int. Soc. Opt. Eng: 60241R.1-60241R.8

Ivanova, J. 1987: Mechanical interpretatioon of the Berger's hypothesis for the global stability of statically loaded shelles. International Journal of Non-Linear Mechanics 22(1): 73-77

Roman, I.; Aharonov, R. 1992: Mechanical interrogation of interfaces in monofilament model composites of continuous SiC fiber-aluminum matrix. Acta Metallurgica et Materialia 40(3): 477-485

Krebs, H.B.; Goplerud, D.R. 1987: Mechanical intestinal obstruction in patients with gynecologic disease: a review of 368 patients. Am. J. Obstet. Gynecol 157(3): 577-583

Molina, R.H. 2004: Mechanical inventions for navigating without sails or oars. Naval Engineers Journal 116(2): 15-18

Datashvili, L.; Baler, H.; Encinar, J.A.; Legay, H. 2006: Mechanical investigation of a multi-layer reflectarray for Ku-band space antennas. Aerospace Science and Technology 10(7): 618-627

Nyilas, A.; Jeske, U. 1988: Mechanical investigation of fibre reinforced materials for superconducting poloidal field coil design. Cryogenics (Guildford) 28(5): 312-316

Grant, C.A.; Twigg, P.C.; Savage, M.D.; Hong Woon, W.; Greig, D. 2012: Mechanical Investigations on Agar Gels Using Atomic Force Microscopy: Effect of Deuteration. Macromolecular Materials and Engineering 297(3): 214-218

Nyilas, A.; Obst, B.; Harries, D.R. 1998: Mechanical investigations on aged stainless steel and incoloy 908 materials at 4.2 K and 7 K. Adv. Cryog. Eng 44: 17-24

Davies, R.; Maltby, T. 1994: Mechanical isolation tool for ESD valve servicing under development. Oil and Gas Journal 92(41): 67-72

Keener, S.G. 1991: Mechanical joining characteristics of aluminum-lithium in a production environment. Sae Transactions 100(1): 2834-2839

Armour, A.D.; Blencowe, M.P.; Schwab, K.C. 2002: Mechanical lamb-shift analogue for the Cooper-pair box. Physica, B Condens. Matter 316-17: 406-407

Pinel, S.; Tasselli, J.; Bailbe, J.P.; Marty, A.; Puech, P.; Esteve, D. 1998: Mechanical lapping, handling and transfer of ultra-thin wafers. Journal of Micromechanics and Microengineering 8(4): 338-342

Bubel, S.; Schmechel, R. 2012: Mechanical layer compaction for dispersion processed nanoparticulate zinc oxide thin film transistors. Microelectronic Engineering 96: 36-39

Osherson, D.N.; Stob, M.; Weinstein, S. 1988: Mechanical learners pay a price for Bayesianism. The Journal of Symbolic Logic 53(4): 1245-1251

Wiszniewski, W.R.; Collins, R.E.; Pailthorpe, B.A. 1994: Mechanical light modulator fabricated on a silicon chip using SIMOX technology. International Conference on Solid-State Sensors and Actuators 43(1-3): 170-174

Tait, R.N.; Mitchell, A.W. 1994: Mechanical limitations in the performance of integrated acoustic sensors. Eurosensors Vii. Conference 42(1-3): 455-459

Hoffman, G.D.; Mcevoy, P.B. 1985: Mechanical limitations on feeding by meadow spittle-bugs Philaenus spumarius (Homoptera: Cercopidae) on wild and cultivated host plants. Ecological Entomology 10(4): 415-426

Esser, K.A.; White, T.P. 1995: Mechanical load affects growth and maturation of skeletal muscle grafts. Journal of Applied Physiology (1985) 78(1): 30-37

Farley, F.J.M.; Vij, J.K.; Kocot, A.; Murthy, U.M.S.; Burgess, M. 1991: Mechanical load cell based on cavity-controlled microwave oscillators. IEEE Transactions on Microwave Theory and Techniques 39(9): 1611-1616

Takahashi, I.; Kikuchi, S.I.; Sato, K.; Sato, N. 2006: Mechanical load of the lumbar spine during forward bending motion of the trunk : A biomechanical study. Spine (Philadelphia, Pa 1976) 31(1): 18-23

Wanke, T.; Formanek,; Auinger, M.; Merkle, M.; Lahrmann, H.; Zwick, H.; Irsigler, K. 1992: Mechanical load the inspiratory muscles during exercise hyperpnea in patients with type 1 (insulin-dependent) diabetes mellitus. Diabetologia (Berlin) 35(5): 425-428

Gopkalo, A.P.; Novikov, A.I. 2011: Mechanical Loading and Cyclic Heating Phase Shift effect on Fatigue Crack Propagation Rate. Part 2. Fatigue Crack Propagation Rate Prediction. Strength of Materials 43(4): 384-395

Gopkalo, A.P. 2011: Mechanical Loading and Cyclic Heating Phase Shift effect on Fatigue Crack Propagation Rate. Part 1. Phase Shift effect on the Size of a Plastic Zone in the Crack Tip. Strength of Materials 43(3): 332-337

Mendias, C.L.; Gumucio, J.P.; Lynch, E.B. 2012: Mechanical loading and TGF-β change the expression of multiple miRNAs in tendon fibroblasts. Journal of Applied Physiology (1985) 113(1): 56-62

Inman, C.L.; Warren, G.L.; Hogan, H.A.; Bloomfield, S.A. 1999: Mechanical loading attenuates bone loss due to immobilization and calcium deficiency. Journal of Applied Physiology (1985) 87(1): 189-195

David, V.; Martin, A.; Lafageproust, M.H.; Malaval, L.; Peyroche, S.; Jones, D.B.; Vico, L.; Guignandon, A. 2007: Mechanical loading down-regulates peroxisome proliferator-activated receptor γ in bone marrow stromal cells and favors osteoblastogenesis at the expense of adipogenesis. Endocrinology (Philadelphia) 148(5): 2553-2562

Basdra, E.K.; Huber, L.A.; Komposch, G.; Papavassiliou, A.G. 1994: Mechanical loading triggers species biochemical responses in mandibular condylar chondrocytes. Biochimica et Biophysica Acta. Molecular cell Research 1222(2): 315-322

Takao, T.; Masuda, T.; Nishimura, K.; Takagi, T.; Goto, T.; Fukui, S.; Yamanaka, A. 2011: Mechanical Loss and Bobbin Materials in AC Superconducting Coil Under AC Magnetic Field. Ieee Trans. Appl. Supercond 21(3): 2420-2423

Cheng, B.L.; Gabbay, M.; Fantozzi, G.; Duffy, W. 1994: Mechanical loss and elastic modulus associated with phase transitions of barium titanate ceramics. J. Alloys Compd 211-12: 352-355

Zachariasz, R.; Czerwiec, M.; Ilczuk, J.; Brus, B.; Zarycka, A.; Bartkowska, J. 2005: Mechanical loss associated with the grain size in lead zirconate titanate ceramics. J. Phys., Iv 129: 185-187

Lakki, A.; Herzog, R.; Weller, M.; Schubert, H.; Reetz, C.; Gorke, O.; Kilo, M.; Borchardt, G. 2000: Mechanical loss, creep, diffusion and ionic conductivity of ZrO2-8 mol%Y2O3 polycrystals. Journal of the European Ceramic Society 20(3): 285-296

Kovalik, J.; Saulson, P.R. 1993: Mechanical loss in fibers for low noise pendulums. Review of Scientific Instruments 64(10): 2942-2946

Schwarz, C.; Heinert, D.; Seidel, P.; Tunnermann, A.; Hammond, G.D.; Nawrodt, R. 2011: Mechanical loss of calcium fluoride at cryogenic temperatures. Physica Status Solidi. A, Applications and Materials Science 208(12): 2719-2723

Weller, M.; Damson, B.; Lakki, A. 2000: Mechanical loss of cubic zirconia. J. Alloys Compd 310(1-2): 47-53

Furuse, M.; Umeda, M.; Takao, T.; Fukasawa, Y.; Minowa, S.; Iwamura, T.; Sato, H.; Asano, T.; Yamanaka, A. 2006: Mechanical loss of HTS coils reinforced with negative thermal expansion fiber materials. Ieee Trans. Appl. Supercond 16(2): 150-153

Ozawa, M.; Itoh, T.; Suda, E. 2004: Mechanical loss of Zr0.8-xCexY0.2O1.9 (x = 0-0.4). J. Alloys Compd 374: 120-123

Cutroni, M.; Tripodo, G. 1992: Mechanical loss spectra of superionic phosphate glasses down to 1 K. Philos. Mag., B, Phys. Condens. Matter, Struct. Electron. Opt. Magn. Prop 65(2): 317-324

Roling, B. 2001: Mechanical loss spectroscopy on inorganic glasses and glass ceramics : Characterization. Current Opinion in Solid State and Materials Science 5(2-3): 203-210

Xie, C.; Carrenomorelli, E.; Schaller, R.; Pitton, Y.; Fornerod, R.C. 2001: Mechanical loss spectrum of aged Al-Mg-Si alloys. Philosophical Magazine. A. Physics of Condensed Matter. Structure, Defects and Mechanical Properties 81(9): 2149-2160

Mourisco, A.; Baluc, N.; Bonneville, J.; Schaller, R. 1998: Mechanical loss spectrum of Ni3(Al, Ta) single crystals. Mater. Sci. Eng. A Struct. Mater. Prop. Microstruct. Proces 239-40: 281-286

Haneczok, G.; Weller, M.; Diehl, J. 1994: Mechanical loss studies of O-O interactions in Ta. J. Alloys Compd 211-12: 71-74

Takao, T.; Shoji, T.; Kashiwazaki, K.; Yamanaka, A.; Takeo, M.; Sato, S. 2002: Mechanical losses and frictional properties of bobbin surfaces in AC superconducting coils. Ieee Trans. Appl. Supercond 12(1): 1639-1642

Takao, T.; Fummura, Y.; Higuchi, T.; Arikawa, M.; Yamamoto, K.; Goto, T.; Fukui, S.; Yamanaka, A. 2006: Mechanical losses due to frictional heat in Bi-2223 tapes with structural materials of various thermal expansion properties. Ieee Trans. Appl. Supercond 16(2): 101-104

Hinkley, J.A. 1984: Mechanical losses in crosslinked polyethersulfone. Journal of Polymer Science. Polymer Letters Edition 22(9): 497-499

Grabber, J.H. 2008: Mechanical Maceration Divergently Shifts Protein Degradability in Condensed-Tannin vs. o-Quinone Containing Conserved Forages. Crop Science 48(2): 804-813

Hintz, R.W.; Koegel, R.G.; Kraus, T.J.; Mertens, D.R. 1999: Mechanical maceration of alfalfa : Forage processing for ruminants. J. Anim. Sci 77(1): 187-193

Liang, S.Y. 2006: Mechanical machining and metrology at micro/nano scale. Proc. Spie Int. Soc. Opt. Eng: 628002.1-628002.8

Varykhin, V.N.; Mikheenko, P.N.; Van Bentum, P.J.M.; Perenboom, J.A.A.J. 1994: Mechanical, magnetic, and superconducting properties of high-Tc superconductors Ti-Y-Ba-Cu-O. Physica Status Solidi. A. Applied Research 142(1): 177-183

Liu, H.; Zheng, R.K.; Wang, Y.; Zhang, X.X. 2006: Mechanical magnetoresistance in broken cold-pressed CrO2 powder sample. Journal of Magnetism and Magnetic Materials 302(1): 211-215

Dongming, W.A.N.G. 1991: Mechanical manipulation for a class of differential systems. Journal of Symbolic Computation 12(2): 233-254

Lee, H.; Lee, S.; Shin, H.; Ko, K. 2009: Mechanical matching and microstructural evolution at the coating/substrate interfaces of cold-sprayed Ni, Al coatings. Journal of Alloys and Compounds 478(1-2): 636-641

Chen, W.H.; Cheng, H.C.; Hsu, Y.C.; Uang, R.H.; Hsu, J.S. 2008: Mechanical material characterization of Co nanowires and their nanocomposite. Composites Science and Technology 68(15-16): 3388-3395

Vogel, J.; Feige, H.J.; Saupe, J.; Schubert, S.; Grimm, J. 2014: Mechanical material characterization of photosensitive polymers. Harmnst 2013 International Workshop on high Aspect Ration Micro and Nanosystem Technologies 20(10-11): 1975-1979

Svalova, V.B. 1992: Mechanical-mathematical models of the formation and evolution of sedimentary basins. Sci. Terre, Inform. Geol (31): 201-208

Vijgen, R.O.E.; Dautzenberg, J.H. 1995: Mechanical measurement of the residual stress in thin PVD films. International Conference on Metallurgical Coatings and Thin Films Icmctf 95 270(1-2): 264-269

Knauss, W.G.; Chasiotis, I.; Ying, H.U.A.N.G. 2003: Mechanical measurements at the micron and nanometer scales. 2001 Applied Mechanics and Materials Summer Conference, Special Symposium on Experiments and Modeling of Failure of Modern Materials 35(3-6): 217-231

Palma, M.D.; Ravarotto, D.; Dal Bello, S.; Fincato, M.; Ghiraldelli, R.; Marchiori, G.; Taliercio, C.; Zaccaria, P. 2010: Mechanical measurements in RFX-mod experiment. International Symposium on Fusion Nuclear Technology 85(7-9): 1279-1282

Adam, M.; Delsanti, M.; Durand, D. 1985: Mechanical measurements in the reaction bath during the polycondensation reaction, near the gelation threshold. Macromolecules 18(11): 2285-2290

Jones, E.E.; Murphy, K.D.; Begley, M.R. 2003: Mechanical measurements of adhesion in microcantilevers: Transitions in geometry and cyclic energy changes. Experimental Mechanics 43(3): 280-288

Rodriguezmarek, D.; Pang, M.; Bahr, D.F. 2003: Mechanical measurements of passive film fracture on an austenitic stainless steel. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science 34(6): 1291-1296

Vogel, H.G. 1994: Mechanical measurements of skin. Acta Derm.-Venereol., Suppl (185): 39-43

Ji Won, S.U.K.; Murali, S.; An, J.; Ruoff, R.S. 2012: Mechanical measurements of ultra-thin amorphous carbon membranes using scanning atomic force microscopy. Carbon (New York) 50(6): 2220-2225

Broggi, F.; Deregel, J.; Gallet, B.; Hervieu, B. 2000: Mechanical measurements on the race-track prototype for the ATLAS B0 and Barrel Toroid magnet. Ieee Trans. Appl. Supercond 10(1): 385-388

Lynch, J.A.; Baker, P.L.; Polly, R.E.; Lepse, P.S.; Wallace, B.E.; Roudybush, D.; Sund, K.; Lynch, N.M. 1990: Mechanical measures in the prophylaxis of postoperative thromboembolism in total knee arthroplasty. Clin. Orthop. Relat. Res (260): 24-29

Souffache, E.; Perez, G.; Lecluse, C.; Rault, J. 1988: Mechanical memory effect in isotropic polyethylene terephthalate fiber crystallized from the glassy state. Journal of Macromolecular Science. Physics 27(4): 337-357

Seffen, K.A. 2006: Mechanical memory metal : a novel material for developing morphing engineering structures. Scripta Materialia 55(4): 411-414

Moreno, D.S.; Forster, H.S.; Arciero, M. 1984: Mechanical method of applying thixotropic adhesives to plates for trapping small insects. Journal of Economic Entomology 77(1): 258-261

Kaido, C. 1991: Mechanical method of iron loss measurement in a rotational field and analysis of iron loss in a motor. J. Appl. Phys 69(8): 5106-5108

Diab, Y.G. 1995: Mechanical method to evaluate safety factors in buried pipes. Journal of Transportation Engineering 121(1): 94-101

Abel, J.S.; Titrington, J.; Jordan, R.; Porowski, J.S.; Odonnell, W.J.; Badlani, M.L.; Hampton, E.J. 1988: Mechanical methods of improving resistance to stress corrosion cracking in BWR piping systems - Méthodes mécaniques d'amélioration de la résistance à la fissuration en corrosion sous contraintes des systèmes de tubulures des réacteurs BWR. International Journal of Pressure Vessels and Piping 34(1-5): 17-29

Muvrin, B.; Salopek, B. 1992: Mechanical methods of waste water purification. Nafta (Zagreb) 43(7): 349-362

Bahemmat, P.; Besharati, M.K.; Haghpanahi, M.; Rahbari, A.; Salekrostam, R. 2010: Mechanical, micro-, and macrostructural analysis of AA7075-T6 fabricated by friction stir butt welding with different rotational speeds and tool pin profiles. Proceedings of the Institution of Mechanical Engineers. Part B. Journal of Engineering Manufacture 224(3): 419-433

Belforte, G.; Eula, G.; Ferraresi, C.; Nakada, T. 1998: Mechanical microactuators with photostrictive control. Jsme International Journal. Series C, Mechanical Systems, Machine Elements and Manufacturing 41(4): 886-892

Gorshkov, V.G.; Danileiko Yu, K.; Osiko, V.V.; Sidorin, A.V.; Veselovskaya, N.V.; Dankovskii Yu, V.; Shklyar, B.L. 1988: Mechanical microstresses in dislocation-free floating-zone silicon monocrystals. Physica Status Solidi. A. Applied Research 106(2): 363-369

Higueracobos, O.F.; Cabrera, J.M. 2013: Mechanical, microstructural and electrical evolution of commercially pure copper processed by equal channel angular extrusion. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 571: 103-114

Cecchini, R.; Fabrizi, A.; Cabibbo, M.; Paternoster, C.; Mavrin, B.N.; Denisov, V.N.; Novikova, N.N.; Haidopoulo, M. 2011: Mechanical, microstructural and oxidation properties of reactively sputtered thin Cr ― N coatings on steel. Thin Solid Films 519(19): 6515-6521

Twohig, E.; Tiernan, P.; Butler, J.; Dickinson, C.; Tofail, S.A.M. 2014: Mechanical, microstructural and thermal properties of a 50:50 at.% nickel-titanium alloy subjected to a dieless drawing process. Acta Materialia 68: 140-149

Laborde, J.I.; Hoya, J.; Reyes Tolosa, M.D.; Hernandezfenollosa, M.A.; Damonte, L.C. 2014: Mechanical milled doped Zn-based semiconductors powders for photovoltaic devices. Int. J. Hydrogen Energy 39(16): 8697-8701

Xue, B.; Calvez, L.; Nazabal, V.; Zhang, X.H.; Delaizir, G.; Monnier, J.; Martinelli, G.; Quiquempois, Y. 2013: Mechanical milling and SPS used to obtain GeS2-βGeS2 infrared glass-ceramic. J. Non-Cryst. Solids 377: 240-244

Ares, J.R.; Cuevas, F.; Percheronguegan, A. 2005: Mechanical milling and subsequent annealing effects on the microstructural and hydrogenation properties of multisubstituted LaNi5 alloy. Acta Materialia 53(7): 2157-2167

Gonzalezcalbet, J.M.; Alonso, J.; Herrero, E.; Valletregi, M. 1997: Mechanical milling as an alternative route to produce superconducting oxides. International Symposium on the Reactivity of Solids 101-103: 119-123

Babu, M.; Kim, H.S.; Hong, S.J.; Kim, H.Y. 2013: Mechanical Milling Behavior and Characteristics of Bi2Te3 Thermoelectric Materials - Verhalten bei mechanischem Mahlen und Charakteristika thermoelektrischer Bi2Te3-Werkstoffe. Praktische Metallographie 50(2): 143-153

Yin, F.; Gu, N.; Shigematsu, T.; Nakanishi, N. 1996: Mechanical milling effect on crystal structures and magnetic properties of MnAs and Mn0.8Ti0.2As compounds. Materials Transactions - Jim 37(7): 1356-1362

Takano, H.; Oba, N.; Murayama, S.; Hoshi, K. 1998: Mechanical milling in hexagonal Fe-Y compounds. J. Magn. Magn. Mater 177-81: 1445-1446

Zhao, Y.H.; Jin, Z.H.; Lu, K. 1999: Mechanical-milling-induced amorphization of Se : a crystallite destabilization model. Philosophical Magazine Letters 79(9): 747-754

Jianhong, H.E.; Chung, K.H.; Liao, X.; Zhu, Y.T.; Lavernia, E.J. 2003: Mechanical milling-induced deformation twinning in Fcc materials with high stacking fault energy. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science 34(3): 707-712

Yin, F.; Shigematsu, T.; Nakanishi, N.; Osawa, Y.; Sato, A. 1997: Mechanical milling induced phase transformation in orthorhombic nanocrystalline MnP compound. Nanostructured Materials 8(5): 587-594

Zhu, Y.H.; Lopez Hirata, V.M.; Saucedomunoz, M. 1998: Mechanical milling induced preferred orientation in a Zn-Al based alloy. Materials and Manufacturing Processes 13(2): 287-296

Ishihara, K.N.; Irie, K.; Kubo, F.; Yamasue, E.; Okumura, H. 2007: Mechanical milling of Fe-Li and Cu-Li systems and their nitrogen absorption properties. Rq 12 : International Conference on Rapidly Quenched and Metastable Materials 449-451: 1067-1070

Takano, H.; Oba, N.; Murayama, S.; Hoshi, K.; Bakker, H.; De Boer, F.R. 1999: Mechanical milling of Fe72Pt28 alloy. Journal of Alloys and Compounds 287(1-2): 256-263

Hwang, S.; Nishimura, C.; Mccormick, P.G. 2001: Mechanical milling of magnesium powder. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 318(1-2): 22-33

Cho, Y.S.; Koch, C.C. 1993: Mechanical milling of ordered intermetallic compounds : the role of defects in amorphization. Journal of Alloys and Compounds 194(2): 287-294

Liu, X.D.; Nagumo, M.; Umemoto, M. 1998: Mechanical milling of pure Ti and pure Zr. Materials Transactions - Jim 39(4): 463-468

Liang, Y.; Liu, Y.; Jia, Z.J. 2009: Mechanical milling of Sn-Mo powder mixtures and electrochemical performance in lithium ion batteries. Journal of Alloys and Compounds 474(1-2): 590-594

Koyano, T. 2007: Mechanical Milling Process of High Nitrogen Austenite. Isij International 47(12): 1826-1828

Li, X.Y.; Tandon, K.N. 1999: Mechanical mixing induced by sliding wear of an Al-Si alloy against M2 steel. International Conference on Wear of Materials 225-229(1): 640-648

Braga, D.; Giaffreda, S.L.; Curzi, M.; Maini, L.; Polito, M.; Grepioni, F. 2007: Mechanical mixing of molecular crystals : A green route to co-crystals and coordination networks. Journal of Thermal Analysis and Calorimetry 90(1): 115-123

Anderson, R.M.; Hall, K.D.; Huner, M. 2006: Mechanical mixture simulation devices for determining and calibrating internal angle of gyration in Superpave gyratory compactor. Transportation Research Record (1970): 99-105

Hubaut, R.; Ben Tayeb, B.O.; Kuang, W.; Rives, A.; Fournier, M. 2006: Mechanical mixtures of Me (Ni, Pd) Ce oxides and silica-supported heteropolyacids : Role and optimal concentration of each active species in n-hexane isomerization : Highly organized catalytic systems. Kinetics and Catalysis 47(1): 20-24

Fischer, J.; Konig, G. 1997: Mechanical model for diagonal tension failure - Modèle mécanique de la rupture de traction diagonale. Ceb Comite Euro International du Beton, Bulletin (237): 231-246

Yamatomi, J.; Mogi, G. 1992: Mechanical model for elasto-viscoplastic behavior of rock and FEM analysis. Journal of the Faculty of Engineering. University of Tokyo. Series A. Annual Report (30): 54-55

Fantilli, A.P.; Ferretti, D.; Idri, I.; Vallini, P. 2002: Mechanical model for failure of compressed concrete in reinforced concrete beams - Modèle mécanique de la rupture du béton en compression dans les poutres en béton armé. Journal of Structural Engineering (New York) 128(5): 637-645

Szumko, S. 1989: Mechanical model for oscillating water column with compressibility. Journal of Engineering Mechanics 115(9): 1851-1866

Zhang, L.B.; Wang, L.J.; Liu, X.Y.; Zhao, H.W.; Wang, X.; Luo, H.Y. 2001: Mechanical model for predicting thrust and torque in vibration drilling fibre-reinforced composite materials. International Journal of Machine Tools and Manufacture 41(5): 641-657

Farsaci, F.; Ciancio, V.; Rogolino, P. 2010: Mechanical model for relaxation phenomena in viscoanelastic media of order one. Physica. B, Condensed Matter 405(16): 3208-3212

Fratzl, P.; Burgert, I.; Keckes, J. 2004: Mechanical model for the deformation of the wood cell wall. Zeitschrift für Metallkunde 95(7): 579-584

Horvath, F.; Royden, L.H. 1983: Mechanical model for the formation of the intra-Carpathian Basins - Modèle mécanique pour la formation des Bassins intra-Carpathiques. Association Geologique Carpatho-Balkanique. Congres 12 (1983) 60: 65-73

Jimenezceniceros, A.; Vazquezpolo, G.; Renero, C.; Castano, V.M. 1994: Mechanical model for two-dimensional coarsening foams. Materials Letters (General Ed.) 19(5-6): 317-323

Macdougall, C.; Bartlett, F.M. 2006: Mechanical model for unbonded seven-wire tendon with single broken wire. Journal of Engineering Mechanics 132(12): 1345-1353

Macdougall, C.; Bartlett, F.M. 2005: Mechanical model for unbonded seven-wire tendon with symmetric wire breaks. Journal of Engineering Mechanics 131(12): 1239-1247

Liu, P.S.; Chen, G.F.; Chen, Y.M. 2009: Mechanical model of porous metal foams under multiaxial tensile loads. Philosophical Magazine Letters 89(10): 655-663

Tarnai, T. 2001: Mechanical model of the pattern formation of lotus receptacles. Int. J. Solids Struct 38(10-13): 2161-2170

Chang, T.S.; Singh, M.P. 2009: Mechanical Model Parameters for Viscoelastic Dampers. Journal of Engineering Mechanics 135(6): 581-584

Guzman de Villoria, R.; Miravete, A. 2007: Mechanical model to evaluate the effect of the dispersion in nanocomposites. Acta Materialia 55(9): 3025-3031

Laird, G.; Schrems, K.K. 1997: Mechanical modeling and analysis of the impact testing of wire. Experimental Mechanics 37(3): 258-263

Ishikawa, K.; Maehara, M.; Kobayashi, Y. 2002: Mechanical modeling and microstructural observation of pure aluminum crept under constant stress. Rate Processes in Plastic Deformation Ii: Towards a Unified Constitutive Theory of Deformation. Symposium, Tms Fall Meeting 322(1-2): 153-158

Qingkai, M.E.N.G.; De Kee, D. 2013: Mechanical Modeling of a Three-Phase Nanocomposite Polymeric Material. Journal of Applied Polymer Science 127(6): 4644-4652

Vinogradov, V.N.; Golubev, G.A. 1994: Mechanical modeling of angular coordinate measurements made by a radar with a phased antenna array, for use in synthesizing algorithms for processing measurement results. Journal of Communications Technology and Electronics 39(6): 61-67

Murakami, S.; Mizuno, M.; Okamoto, T. 1991: Mechanical modeling of creep, swelling and damage under irradiation for polycrystalline metals. Nuclear Engineering and Design 131(2): 147-155

Lahey, T.J.; Heppler, G.R. 2004: Mechanical modeling of fabrics in bending. Journal of Applied Mechanics 71(1): 32-40

Chiang, C.J.; Winscom, C.; Bull, S.; Monkman, A. 2009: Mechanical modeling of flexible OLED devices. Organic Electronics 10(7): 1268-1274

Tristani, L.; Zindine, E.M.; Boyer, L.; Klimek, G. 2001: Mechanical modeling of fretting cycles in electrical contacts. Wear 249(1-2): 12-19

Sue, H.J.; Pearson, R.A.; Yee, A.F. 1991: Mechanical modeling of initiation of localized yielding under plane stress conditions in rigid-rigid polymer alloys. Polymer Engineering and Science 31(11): 793-802

Fisher, A.; Tejeda, R.; Sprague, M.; Engelstad, R.; Lovell, E. 1998: Mechanical modeling of ion beam lithography masks. Micro- and Nano-Engineering Mne 97 International Conference on Micro- and Nanofabrication 41-42: 245-248

Xu, X.; Liang, Y.C.; Lee, H.P.; Lin, W.Z.; Lim, S.P.; Lee, K.H.; Shi, X.H. 2003: Mechanical modeling of longitudinal oscillation ultrasonic motors and temperature effect analysis. Smart Materials and Structures 12(4): 514-523

Murakami, S. 1988: Mechanical modeling of material damage. Journal of Applied Mechanics 55(2): 280-286

Dicks, G.A.; Engelstad, R.L.; Lovell, E.G.; Liddle, J.A. 1997: Mechanical modeling of Projection Electron-beam Lithography masks. Jpn. J. Appl. Phys 36(12B): 7564-7569

Vendramini, J.; Mele, P.; Merle, G.; Alberola, N.D. 2000: Mechanical modeling of the transcrystalline interphase behavior in commingled PBT/glass fiber composites. Journal of Applied Polymer Science 77(11): 2513-2524

Doumanidis, C.; Gao, Y. 2004: Mechanical modeling of ultrasonic welding. Welding Journal 83(4): 140S-146S

Topin, V.; Radjai, F.; Delenne, J.Y.; Mabille, F. 2009: Mechanical modeling of wheat hardness and fragmentation. Symposium Powder Science and Technology - Powders and Sintered Material, Stp-Pmf 2007 190(1-2): 215-220

Tada, Y.; Matsumoto, R.; Nishimura, Y. 1990: Mechanical modelings of the brain and simulation of the biomeechanism of hydrocephalus. Jsme International Journal. Series 1, Solid Mechanics, Strenght of Materials 33(2): 269-275

Castaing, P.; Lemoine, L.; Gourdenne, A. 1995: Mechanical modelling of blisters on coated laminates. I: Theoretical aspects. Composite Structures 30(2): 217-222

Castaing, P.; Lemoine, L.; Gourdenne, A. 1995: Mechanical modelling of blisters on coated laminates. II: Experimental analysis. Composite Structures 30(2): 223-228

Guessasma, S.; Chaunier, L.; Della Valle, G.; Lourdin, D. 2011: Mechanical modelling of cereal solid foods. Trends in Food Science and Technology (Regular Ed.) 22(4): 142-153

Pompe, W.; Semsch, M.; Balke, H.; Bramer, K. 1994: Mechanical modelling of domain patterns in strained epitaxy of thin films. Archives of Mechanics 46(5): 805-810

Scherzer, M.; Glaser, H. 2002: Mechanical modelling of failure patterns in TiN-coatings loaded by homogenous stresses of a bending specimen. International Journal of Fracture 114(3): 291-306

Elhachimi, M.; Torbaty, S.; Jovot, P. 1999: Mechanical modelling of high speed drilling. 2 : Predicted and experimental results. International Journal of Machine Tools and Manufacture 39(4): 569-581

Elhachimi, M.; Torbaty, S.; Joyot, P. 1999: Mechanical modelling of high speed drilling. 1 : Predicting torque and thrust. International Journal of Machine Tools and Manufacture 39(4): 553-568

Kermouche, G.; Barthel, E.; Vandembroucq, D.; Dubujet, P. 2008: Mechanical modelling of indentation-induced densification in amorphous silica. Acta Materialia 56(13): 3222-3228

Bigerelle, M.; Hagege, B.; Mohamed El, M.A.N.S.O.R.I. 2008: Mechanical modelling of micro-scale abrasion in superfinish belt grinding. Leeds-Lyon Symposium on Tribology 41(11): 992-1001

Carvelli, V.; Corazza, C.; Poggi, C. 2008: Mechanical modelling of monofilament technical textiles. Computational Materials Science 42(4): 679-691

Gberasategui, E.; Bull, S.J.; Page, T.F. 2004: Mechanical modelling of multilayer optical coatings. International Conference on Metallurgical Coatings and Thin Films 447-448: 26-32

Marcadon, V. 2011: Mechanical modelling of the creep behaviour of Hollow-Sphere Structures. Computational Materials Science 50(10): 3005-3015

Seris, J.P. 1995: Mechanical models and the language sciences in the 18th century. Amsterdam Studies in the Theory and History of Linguistic Science. Series 3, Studies in the History of Linguistics 74: 45-83

Karlsson, L.G. 1982: Mechanical models for lattice vibrations. Archives of Mechanics 34(2): 127-132

Bellomonte, L.; Guastella, I.; Sperandeomineo, R.M. 2005: Mechanical models of amplitude and frequency modulation. European Journal of Physics 26(3): 409-422

Avalle, M.; Belingardi, G.; Ibba, A. 2007: Mechanical models of cellular solids : Parameters identification from experimental tests. International Conference on Impact Loading of Lightweight Structures 34(1): 3-27

Qibo, D.E.N.G.; Smetanin, M.; Weissmuller, J. 2014: Mechanical modulation of reaction rates in electrocatalysis. Journal of Catalysis 309: 351-361

Braun, J.T.; Hoffman, M.; Akyuz, E.; Ogilvie, J.W.; Brodke, D.S.; Bachus, K.N. 2006: Mechanical modulation of vertebral growth in the fusionless treatment of progressive scoliosis in an experimental model. Spine (Philadelphia, Pa 1976) 31(12): 1314-1320

Boyd, R.H.; Wenbin, L.I.A.U. 1986: Mechanical moduli of spherulitic lamellar semicrystalline polymers. Macromolecules 19(8): 2246-2249

Wan, Y.Z.; Honglin, L.U.O.; He, F.; Liang, H.; Huang, Y.; Li, X.L. 2009: Mechanical, moisture absorption, and biodegradation behaviours of bacterial cellulose fibre-reinforced starch biocomposites. Composites Science and Technology 69(7-8): 1212-1217

Ricciardi, L.; Perissinotto, A.; Dabala, M. 1993: Mechanical monitoring of fracture healing using ultrasound imaging : Newest knowledge of external skeletal fixation devices. Clinical Orthopaedics and Related Research (293): 71-76

Acernese, F.; De Rosa, R.; Giordano, G.; Romano, R.; Barone, F. 2007: Mechanical Monolithic Sensor for low frequency seismic noise measurement. Proc. Spie Int. Soc. Opt. Eng: 65292B.1-65292B.12

Acernese, F.; De Rosa, R.; Giordano, G.; Romano, R.; Barone, F. 2007: Mechanical Monolithic Sensor for low frequency seismic noise measurement. Proc. Spie Int. Soc. Opt. Eng: 67491I.1-67491I.12

Dalmeida, J.R.M.; Dalmeida, A.L.F.S.; De Carvalho, L.H. 2008: Mechanical, Morphological, and Structural Characteristics of Caroa (Neoglaziovia variegata) Fibres. Polymers and Polymer Composites 16(9): 589-595

Amar Singh, S.I.N.G.H.A.; Aishwarya, J.Y.O.T.I. 2013: Mechanical, Morphological, and Thermal Properties of Chemically Treated Pine Needles Reinforced Thermosetting Composites. Journal of Applied Polymer Science 127(1): 387-393

Amri, F.; Husseinsyah, S.; Hussin, K. 2013: Mechanical, morphological and thermal properties of chitosan filled polypropylene composites: The effect of binary modifying agents. Composites. Part A, Applied Science and Manufacturing 46: 89-95

Rath, T.; Kumar, S.; Mahaling, R.N.; Khatua, B.B.; Das, C.K.; Yadaw, S.B. 2008: Mechanical, morphological and thermal properties of in situ ternary composites based on poly(ether imide), silicone rubber and liquid crystalline polymer. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 490(1-2): 198-207

Singha, A.S.; Vijay Kumar, T.H.A.K.U.R. 2009: Mechanical, Morphological and Thermal Properties of Pine Needle-Reinforced Polymer Composites. International Journal of Polymeric Materials 58(1-3): 21-31

Xie, W.B.; Tam, K.C.; Yue, C.Y.; Hu, X.; Lam, Y.C.; Li, L. 2001: Mechanical, morphological, and thermal properties of poly(ethylene 2,6-naphthalate) and copolyester LCP blends. Journal of Applied Polymer Science 82(2): 477-488

Chow, W.S.; Neoh, S.S. 2010: Mechanical, Morphological and Thermal Properties of Polycarbonate/SEBS-G-MA/Montmorillonite Nanocomposites. Polymer-Plastics Technology and Engineering (Softcover Ed) 49(1-3): 62-68

Ariffin, A.; Mansor, A.S.; Jikan, S.S.; Ishak, Z.A.M. 2008: Mechanical, Morphological, and Thermal Properties of Polypropylene/Kaolin Composite. Part I. The Effects of Surface-Treated Kaolin and Processing Enhancement. Journal of Applied Polymer Science 108(6): 3901-3916

Thirumal, M.; Khastgir, D.; Singha, N.K.; Manjunath, B.S.; Naik, Y.P. 2009: Mechanical, Morphological and Thermal Properties of Rigid Polyurethane Foam : Effect of Chain Extender, Polyol and Blowing Agent. Cellular Polymers 28(2): 145-158

Thirumal, M.; Khastgir, D.; Singha, N.K.; Manjunath, B.S.; Naik, Y.P. 2007: Mechanical, morphological and thermal properties of rigid polyurethane foam : Effect of the fillers. Cellular Polymers 26(4): 245-259

Seo, W.J.; Jung, H.C.; Hyun, J.C.; Kim, W.N.; Lee, Y.B.; Choe, K.H.; Kim, S.B. 2003: Mechanical, morphological, and thermal properties of Rigid polyurethane foams blown by distilled water. Journal of Applied Polymer Science 90(1): 12-21

Tasdemir, M.; Ulug, E. 2012: Mechanical, Morphological and Thermal Properties of SEBS, SIS and SBR-type Thermoplastic Elastomers Toughened High Impact Polystyrene. Polymer-Plastics Technology and Engineering (Softcover Ed) 51(1-3): 164-169

Bureau, M.N.; Gendron, R. 2003: Mechanical-morphology relationship of PS foams. J. Cell. Plast 39(5): 353-367

Liu, T.H.; Pao, C.W.; Chang, C.C. 2014: Mechanical mutability of polycrystalline graphene from atomistic simulations. Computational Materials Science 91: 56-61

Schimmel, T.; Eng, L.; Fuchs, H.; Luxsteiner, M. 1992: Mechanical nanostructuring of WSe2 with the STM : tip shape dependence and writing techniques. Annales de Chimie (Paris 1914) 17(3-4): 205-216

Kesheng, W.A.N.G.; Bjrke, W.A.N.G. 1991: Mechanical networks model for the plane frame system. Computers in Industry 16(2): 113-128

Velascodavalos, I.A.; Ruediger, A.; Cruzrivera, J.J.; Gomezyanez, C. 2013: Mechanical niobium doping in barium titanate electroceramics. Journal of Alloys and Compounds 581: 56-58

Li, J.; Peterson, G.P.; Cheng, P. 2005: Mechanical nonequilibrium considerations in homogeneous bubble nucleation for unsteady-state boiling. International Journal of Heat and Mass Transfer 48(15): 3081-3096

Drozda, T.J. 1983: Mechanical nontraditional machining processes. Pt. 3. Manufacturing Engineering 91(1): 61-64

Bockelmann, U.; Essevazroulet, B.; Thomen, P.; Heslot, F. 2002: Mechanical opening of DNA by micro manipulation and force measurements. Comptes Rendus. Physique 3(5): 585-594

Wissbrock, H.; Naundorf, G.; Fildhuth, R. 1994: Mechanical operating parts with tailored electrical conductivity : development of a suitable material. Experimentelle Technik der Physik 40(2): 303-306

Poisson, C.; Guerengomba, J.; Lacrampe, M.F.; Krawczak, P.; Gupta, B.; Miri, V.; Lefebvre, J.M. 2008: Mechanical, Optical and Barrier Properties of PA6/Nanoclay-Based Single-and Multilayer Blown Films. Polymers and Polymer Composites 16(6): 349-358

Hassan, M.L.; Ward, A.A.; Eid, M.A. 2010: Mechanical, Optical, and Electrical Properties of Cellulosic Semiconductor Nanocomposites. Journal of Applied Polymer Science 115(5): 2847-2854

Atanassov, G.; Turlo, J.; Ji Kai, F.U.; Yi Sheng, D.A.I. 1999: Mechanical, optical and structural properties of TiO2 and MgF2 thin films deposited by plasma ion assisted deposition. Thin Solid Films 342(1-2): 83-92

Miller, C.M. 1986: Mechanical optical fiber splices. Journal of Lightwave Technology 4(8): 1228-1231

Julicher, F. 2001: Mechanical oscillations at the cellular scale : La physique à l'échelle de la cellule - Physics at the scale of the cell. Comptes Rendus de l'Academie des Sciences. Serie Iv, Physique, Astrophysique 2(6): 849-860

Belyaev, S.P.; Volkov, A.E.; Voronkov, A.V. 1999: Mechanical oscillations in TiNi under synchronized martensite transformations. Journal of Engineering Materials and Technology 121(1): 105-107

Bernat, B.; Bernat, H. 1997: Mechanical oscillator frees stuck pipe strings using resonance technology. Oil and Gas Journal 95(44): 68-71

Chapman, A.E.; Caldwell, G.E.; Selbie, W.S. 1985: Mechanical output following muscle stretch in foream supination against inertial loads. Journal of Applied Physiology (1985) 59(1): 78-86

Bijaoui, E.; Baconnier, P.F.; Bates, J.H.T. 2001: Mechanical output impedance of the lung determined from cardiogenic oscillations. Journal of Applied Physiology (1985) 91(2): 859-865

Kelley, G. 1996: Mechanical overload and skeletal muscle fiber hyperplasia : a meta-analysis. Journal of Applied Physiology (1985) 81(4): 1584-1588

Cortes, E.; Cortespoza, D. 2011: Mechanical paradox: the uphill roller. European Journal of Physics 32(6): 1559-1576

Oliven, A.; Kaufman, E.; Kaynan, R.; Oliven, R.; Steinfeld, U.; Tov, N.; Odeh, M.; Gaitini, L.; Schwartz, A.R.; Kimmel, E. 2010: Mechanical parameters determining pharyngeal collapsibility in patients with sleep apnea. Journal of Applied Physiology (1985) 109(4): 1037-1044

Wang, J.H. 1988: Mechanical parameters identification, with special consideration of noise effects. Journal of Sound and Vibration 125(1): 151-167

Skrodzka, E.B. 2005: Mechanical passive and active models of the human basilar membrane. Applied Acoustics 66(12): 1321-1338

Anonymous 1988: Mechanical paving ― Rotterdam PWD's experience - Pavage mécanisé ― Expérience du département des travaux publics de Rotterdam. Concrete Plant and Production 6(8): 285-288

Emadi, B.; Abbaspourfard, M.H.; Yarlagadda, P.K.D.V. 2008: Mechanical peeling of pumpkins. Part 2: Modeling of peeling process. Journal of Food Engineering 89(4): 453-459

Saffarini, G.; Saiter, J.M. 2002: Mechanical percolation and structural transition in Ge-S-Bi bulk glasses. Materials Letters (General Ed.) 57(1): 219-222

Favier, V.; Canova, G.R.; Shrivastava, S.C.; Cavaille, J.Y. 1997: Mechanical percolation in cellulose whisker nanocomposites. Polymer Engineering and Science 37(10): 1732-1739

Joon Lee, S. 2008: Mechanical performance and crack retardation study of a fiberglass-grid-reinforced asphalt concrete system. Canadian Journal of Civil Engineering 35(10): 1042-1049

Yao Jun, Z.H.A.N.G.; Ya Chao, W.A.N.G.; De Long, X.U.; Sheng, L.I. 2010: Mechanical performance and hydration mechanism of geopolymer composite reinforced by resin. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 527(24-25): 6574-6580

Osorio, W.R.; Bortolozo, A.D.; Peixoto, L.C.; Garcia, A. 2014: Mechanical performance and microstructure array of as-cast lead-silver and lead-bismuth alloys. Journal of Power Sources 271: 124-133

Szpieg, M.; Wysocki, M.; Asp, L.E. 2012: Mechanical performance and modelling of a fully recycled modified CF/PP composite. Journal of Composite Materials 46(12): 1503-1517

Robertson Nl, M.; Nychka, J.A.; Alemaskin, K.; Wolodko, J.D. 2013: Mechanical Performance and Moisture Absorption of Various Natural Fiber Reinforced Thermoplastic Composites. Journal of Applied Polymer Science 130(2): 969-980

Lin, S.Y.; Chang, S.Y.; Huang, Y.C.; Shieu, F.S.; Yeh, J.W. 2012: Mechanical performance and nanoindenting deformation of (AlCrTaTiZr)NCy multi-component coatings co-sputtered with bias. Surface and Coatings Technology 206(24): 5096-5102

Boufi, S.; Kaddami, H.; Dufresne, A. 2014: Mechanical Performance and Transparency of Nanocellulose Reinforced Polymer Nanocomposites. Macromolecular Materials and Engineering 299(5): 560-568

Sgobba, S.; Durzo, C.; Fabbricatore, P.; Sequeira Tavares, S. 2004: Mechanical performance at cryogenic temperature of the modules of the external cylinder of CMS and quality controls applied during their fabrication. IEEE International Conference on Magnet Technology 14(2): 556-559

Pantelakis, S.G.; Alexopoulos, N.D.; Chamos, A.N. 2007: Mechanical performance evaluation of cast magnesium alloys for automotive and aeronautical applications. Journal of Engineering Materials and Technology 129(3): 422-430

Beaulieu, L.; Pleau, R.; Pierre, P.; Poulin, P.; Juneau, S. 2014: Mechanical performance in field conditions of treated and stabilized granular materials used in unpaved roads: a longitudinal study. Canadian Journal of Civil Engineering 41(2): 97-105

Pommersheim, J.M.; Mathey, R.G.; Clifton, J.R. 1983: Mechanical performance model for roofing membranes - Modèle du comportement mécanique des membranes d'étanchéité pour toitures. Journal of Structural Engineering (New York) 109(6): 1431-1449

Giannadakis, K.; Szpieg, M.; Varna, J. 2011: Mechanical Performance of a Recycled Carbon Fibre/PP Composite. Experimental Mechanics 51(5): 767-777

Sun, T.; Wang, M. 2008: Mechanical performance of apatite/TiO2 composite coatings formed on Ti and NiTi shape memory alloy. Appl. Surf. Sci 255(2): 404-408

Scarpa, F.; Giacomin, J.; Zhang, Y.; Pastorino, P. 2005: Mechanical performance of auxetic polyurethane foam for antivibration glove applications. Cellular Polymers 24(5): 253-268

Takagi, H.; Nakagaito, A.N.; Uchida, K. 2012: Mechanical performance of bacterial cellulose nanofibre-reinforced epoxy composites. Transactions On The Built Environment v. 124: 379-386

Haufe, A.; Mennig, G.; Hellmann, G.P. 1994: Mechanical performance of blends of poly(methylmethacrylate) and bisphenol-A polycarbonate with and without weld lines. Plastics Rubber and Composites Processing and Applications 22(5): 277-283

Yongfu, X.U.E.; Jun, Z.H.A.N.G.; Xuejing, Z.H.E.N.G.; Jiasong, H.E. 2003: Mechanical performance of blends of thermotropic Liquid crystalline polymer spheres-dispersed polycarbonate. Journal of Applied Polymer Science 89(6): 1493-1499

Gilchrist, M.D.; Kinloch, A.J.; Matthews, F.L.; Osiyemi, S.O. 1996: Mechanical performance of carbon-fibre- and glass-fibre-reinforced epoxy I-beams: I. Mechanical behaviour. Composites Science and Technology 56(1): 37-53

Gilchrist, M.D.; Kinloch, A.J.; Matthews, F.L. 1999: Mechanical performance of carbon-fibre- and glass-fibre-reinforced epoxy I-beams : III. Fatigue performance. Composites Science and Technology 59(2): 179-200

Gilchrist, M.D.; Kinloch, A.J.; Matthews, F.L. 1996: Mechanical performance of carbon-fibre and glass-fibre-reinforcede epoxy I-beams: II. Fractographic failure observations. Composites Science and Technology 56(9): 1031-1045

Beier, U.; Wolfffabris, F.; Buchs, W.; Fischer, F.; Sandler, J.K.W.; Altstadt, V.; Hulder, G.; Schmachtenberg, E.; Spanner, H.; Weimer, C.; Roser, T. 2008: Mechanical performance of carbon fibre-reinforced composites based on preforms stitched with innovative low-melting temperature and matrix soluble thermoplastic yarns. Composites. Part A, Applied Science and Manufacturing 39(9): 1572-1581

Beier, U.; Sandler, J.K.W.; Altstadt, V.; Spanner, H.; Weimer, C. 2009: Mechanical performance of carbon fibre-reinforced composites based on stitched and bindered preforms. Composites. Part A, Applied Science and Manufacturing 40(11): 1756-1763

Beier, U.; Fischer, F.; Sandier, J.K.W.; Altstadt, V.; Weimer, C.; Buchs, W. 2007: Mechanical performance of carbon fibre-reinforced composites based on stitched preforms. Composites. Part A, Applied Science and Manufacturing 38(7): 1655-1663

Heredia, F.E.; He, M.Y.; Evans, A.G. 1996: Mechanical performance of ceramic matrix composite I-beams. Composites. Part A, Applied Science and Manufacturing 27(12): 1157-1167

Carani, G.; Timellini, G. 1991: Mechanical performance of ceramic tile. American Ceramic Society. Annual Meeting 92 12(1-2): 357-368

Ogitsu, T.; Akhmetov, A.; Devred, A.; Dimarco, J.; Ganetis, G.; Garber, M.; Goodzeit, C.; Ghosh, A.; Gourlay, S.; Greene, A.; Gupta, R.; Hanft, R.; Anerella, M.; Jain, A.; Kahn, S.; Kelly, E.; Koska, W.; Kuchnir, M.; Kuzminski, J.; Lamm, M.J. 1993: Mechanical performance of 5 cm-aperture, 15 m-long SSC dipole magnet prototypes. Ieee Trans. Appl. Supercond 3(1): 686-691

Monteiro, S.N.; Terrones, L.A.H.; Dalmeida, J.R.M. 2008: Mechanical performance of coir fiber/polyester composites. Polymer Testing 27(5): 591-595

Lau, K.T.; Zhou, L.M. 2001: Mechanical performance of composite-strengthened concrete structures. Composites. Part B, Engineering 32(1): 21-31

Brandt, J.; Drechsler, K.; Arendts, F.J. 1996: Mechanical performance of composites based on various three-dimensional woven-fibre preforms. Composites Science and Technology 56(3): 381-386

Ayrilmis, N.; Kaymakci, A.; Akbulut, T.; Elmas, G.M. 2013: Mechanical performance of composites based on wastes of polyethylene aluminum and lignocellulosics. Composites. Part B, Engineering 47: 150-154

Jin, X.I.A.; Jin, W.L.; Zhao, Y.X.; Li, L.Y. 2013: Mechanical performance of corroded steel bars in concrete. Proceedings of the Institution of Civil Engineers. Structures and Buildings 166(5): 235-246

Defino, H.L.A.; Cesar Rosa, R.; Silva, P.; Shimano, A.C.; De Paula, F.J.A.; Batista Volpon, J. 2012: Mechanical Performance of Cylindrical and Dual-Core Pedicle Screws After Repeated Insertion. Spine (Philadelphia, Pa 1976) 37(14): 1187-1191

Falzon, P.J.; Herszberg, I. 1998: Mechanical performance of 2-D braided carbon/epoxy composites. Composites Science and Technology 58(2): 253-265

Arzak, A.; Eguiazabal, J.I.; Nazabal, J. 1997: Mechanical performance of directly injection-molded PEEK/PEI blends at room and high temperature. Journal of Macromolecular Science. Physics 36(2): 233-246

Xu, C.H.A.N.G.; Huang, C.K.; Chen, Y.J. 2009: Mechanical performance of eccentrically loaded pre-stressing concrete filled circular steel tube columns by means of expansive cement. Engineering Structures 31(11): 2588-2597

Joshi, S.; Mukherjee, A.; Kheur, M.; Mehta, A. 2001: Mechanical performance of endodontically treated teeth. Finite Elements in Analysis and Design 37(8): 587-601

Tripp, H.A. 1988: Mechanical performance of fiberglass sucker-rod strings. Spe Production Engineering 3(3): 346-350

Lu, W.A.N.G.; Weiqing, L.I.U.; Li, W.A.N.; Hai, F.A.N.G.; Hui, D. 2014: Mechanical performance of foam-filled lattice composite panels in four-point bending: Experimental investigation and analytical modeling. Composites. Part B, Engineering 67: 270-279

Cortella, J.M.; Devred, A.; Wandesforde, A. 1993: Mechanical performance of full-scale prototype quadrupole magnets for the SSC. Ieee Trans. Appl. Supercond 3(1): 699-704

Sham, M.L.; Kim, J.K.; Hamada, H. 1998: Mechanical performance of glass woven fabric laminates : Effect of hybrid layers with different silane coupling agents. Polymers and Polymer Composites 6(5): 305-312

Kandola, B.K.; Horrocks, A.R.; Myler, P.; Blair, D. 2003: Mechanical performance of heat/fire damaged novel flame retardant glass-reinforced epoxy composites. Composites. Part A, Applied Science and Manufacturing 34(9): 863-873

Tajvidi, M.; Motie, N.; Rassam, G.; Falk, R.H.; Felton, C. 2010: Mechanical Performance of Hemp Fiber Polypropylene Composites at Different Operating Temperatures. Journal of Reinforced Plastics and Composites 29(5): 664-674

Whitby, R.L.D.; Mikhalovsky, S.V.; Gunko, V.M. 2010: Mechanical performance of highly compressible multi-walled carbon nanotube columns with hyperboloid geometries. Carbon (New York) 48(1): 145-152

Wan, Y.Z.; Wang, Y.L.; He, F.; Huang, Y.; Jiang, H.J. 2007: Mechanical performance of hybrid bismaleimide composites reinforced with three-dimensional braided carbon and Kevlar fabrics. Composites. Part A, Applied Science and Manufacturing 38(2): 495-504

Masudul Hassan, M.; Mueller, M.; Tartakowska, D.J.; Wagner, M.H. 2011: Mechanical Performance of Hybrid Rice Straw/Sea Weed Polypropylene Composites. Journal of Applied Polymer Science 120(3): 1843-1849

Podolsky, A.; Chao, E.Y.S. 1993: Mechanical performance of Ilizarov circular external fixators in comparison with other external fixators : Newest knowledge of external skeletal fixation devices. Clinical Orthopaedics and Related Research (293): 61-70

Erp, T.B.V.; Govaert, L.E.; Peters, G.W.M. 2013: Mechanical Performance of Injection-Molded Poly(propylene): Characterization and Modeling. Macromolecular Materials and Engineering 298(3): 348-358

Beg, M.D.H.; Pickering, K.L. 2008: Mechanical performance of Kraft fibre reinforced polypropylene composites : Influence of fibre length, fibre beating and hygrothermal ageing. Composites. Part A, Applied Science and Manufacturing 39(11): 1748-1755

Acchar, W.; Sousa, C.R.C.; Mellocastanho, S.R.H. 2012: Mechanical performance of LaCrO3 doped with strontium and cobalt for SOFC interconnect. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 550: 76-79

Kuo, D.; Sundaram, R.; Thangaraj, N.; Ouyang, J.H.; Shen, I.Y. 2000: Mechanical performance of laminated discs. Ieee Trans. Magn 36(1): 166-170

Feiteira, J.; Grandao Lopes, J.; De Brito, J. 2013: Mechanical Performance of Liquid-Applied Roof Waterproofing Systems. Journal of Performance of Constructed Facilities 27(3): 244-251

Yigiter, H.; Aydin, S.; Yazici, H.; Yucel Yardimci, M. 2012: Mechanical performance of low cement reactive powder concrete (LCRPC). Composites. Part B, Engineering 43(8): 2907-2914

Jun, Z.H.A.N.G.; Chengxu, G.O.N.G.; Zili, G.U.O.; Xianchun, J.U. 2009: Mechanical Performance of Low Shrinkage Engineered Cementitious Composite in Tension and Compression. Journal of Composite Materials 43(22): 2571-2585

Bittnerrohrhofer, K.; Humer, K.; Fillunger, H.; Maix, R.K.; Weber, H.W. 2005: Mechanical performance of magnet insulation materials fabricated by the Insulate-Wind-and-React technique. Symposium on Fusion Technology 75-79: 189-192

Allie, L.; Aglan, H. 2011: Mechanical Performance of Nanostructured Thermoplastic Polyimide Films. Journal of Elastomers and Plastics 43(2): 119-135

Jawaid, M.; Abdul Khalil, H.P.S.; Abu Bakar, A. 2010: Mechanical performance of oil palm empty fruit bunches/jute fibres reinforced epoxy hybrid composites. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 527(29-30): 7944-7949

Aro, H.T.; Hein, T.J.; Chao, E.Y.S. 1989: Mechanical performance of pin clamps in external fixators. Clinical Orthopaedics and Related Research (248): 246-253

Allan, P.S.; Hashemi, S.A.; Faulkner, A.; Bevis, M.J. 1998: Mechanical performance of polyethylene pipe elbows produced by novel continuous moulding process. International Conference on Plastics Pipes 27(9): 407-409

Meijer, H.E.H.; Govaert, L.E. 2005: Mechanical performance of polymer systems : The relation between structure and properties. Prog. Polym. Sci 30(8-9): 915-938

Freeman, A.; Mantell, S.C.; Davidson, J.H. 2005: Mechanical performance of polysulfone, polybutylene, and polyamide 6/6 in hot chlorinated water. Solar Energy 79(6): 624-637

Fleischer, C.A.; Zupan, M. 2010: Mechanical Performance of Pumice-reinforced Epoxy Composites. Journal of Composite Materials 44(23): 2679-2696

Kuhn, B.; Wetzel, F.; Malzbender, J.; Steinbrech, R.W.; Singheiser, L. 2009: Mechanical performance of reactive-air-brazed (RAB) ceramic/metal joints for solid oxide fuel cells at ambient temperature. J. Power Sources (Print) 193(1): 199-202

Cem Tasan, C.; Kaynak, C. 2009: Mechanical Performance of Resol Type Phenolic Resin/Layered Silicate Nanocomposites. Polymer Composites 30(3): 343-350

Idicula, M.; Joseph, K.; Thomas, S. 2010: Mechanical Performance of Short Banana/Sisal Hybrid Fiber Reinforced Polyester Composites. Journal of Reinforced Plastics and Composites 29(1): 12-29

Nanda, M.R.; Misra, M.; Mohanty, A.K. 2012: Mechanical Performance of Soy-Hull-Reinforced Bioplastic Green Composites: A Comparison with Polypropylene Composites. Macromolecular Materials and Engineering 297(2): 184-194

Sousa, R.A.; Mano, J.F.; Reis, R.L.; Cunha, A.M.; Bevis, M.J. 2002: Mechanical performance of starch based bioactive composite biomaterials molded with preferred orientation. Polymer Engineering and Science 42(5): 1032-1045

Putnoki, I.; Moos, E.; Kargerkocsis, J. 1999: Mechanical performance of stretched knitted fabric glass fibre reinforced poly(ethylene terephthalate) composites produced from commingled yarn. Plastics, Rubber and Composites 28(1): 40-46

Rezza, P.; Hoenig, M.O.; Steeves, M.M.; Iwasa, Y. 1986: Mechanical performance of superconducting cables subject to cyclic stresses. Adv. Cryog. Eng 31: 333-340

Tjong, S.C.; Wei, J.I.A.N.G. 1999: Mechanical performance of ternary in situ polycarbonate/ poly(acrylonitrile-butadiene-styrene)/liquid crystalline polymer composites. Journal of Applied Polymer Science 74(9): 2274-2282

Tong, C.J.; Chen, M.R.; Chen, S.K.; Yeh, J.W.; Shun, T.T.; Lin, S.J.; Chang, S.Y. 2005: Mechanical performance of the AlxCoCrCuFeNi high-entropy alloy system with multiprincipal elements. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science 36(5): 1263-1271

Tota, B.; Acierno, R.; Agnisola, C. 1991: Mechanical performance of the isolated and perfused heart of the haemoglobinless Antarctic icefish Chionodraco hamatus (Lönnberg) : effects of loading conditions and temperature. Philosophical Transactions of the Royal Society of London. Series B, Biological Sciences 332(1264): 191-198

Ferracin, P.; Ambrosio, G.; Mumper, W.; Nobrega, F.; Prestemon, S.; Sabbi, G.L.; Schmalzle, J.; Sylvester, C.; Tartaglia, M.; Wanderer, P.; Zlobin, A.V.; Anerella, M.; Bingham, B.; Bossert, R.; Caspi, S.; Cheng, D.W.; Chlachidze, G.; Felice, H.; Hafalia, A.R. 2011: Mechanical Performance of the LARP Nb3Sn Quadrupole Magnet LQS01. Ieee Trans. Appl. Supercond 21(3): 1683-1687

Caja, V.L.; Larsson, S.; Kim, W.; Chao, E.Y.S. 1994: Mechanical performance of the Monticelli-Spinelli external fixation system. Clinical Orthopaedics and Related Research (309): 257-266

Yenchek, M.R.; Kovalchik, P.G. 1989: Mechanical performance of thermally aged trailing-cable insulation. Ieee Trans. Ind. Appl 25(6): 1000-1005

Levi, H.; Ishai, O.; Altus, E.; Sheinman, I. 1995: Mechanical performance of thin-walled tubular composite elements under uniaxial loading. I: Tensile behavior. Composite Structures 31(2): 163-170

Ishai, O.; Levi, H.; Altus, E.; Sheinman, I. 1995: Mechanical performance of thin-walled tubular composite elements under uniaxial loading. II: Compressive behavior. Composite Structures 31(2): 171-175

Henao, A.; Carrera, M.; Miravete, A.; Castejon, L. 2010: Mechanical performance of through-thickness tufted sandwich structures. International Conference on Composite Structures 92(9): 2052-2059

Goettler, L.A.; Neff, W.J. 1986: Mechanical performance of various nylon 6 composites formed by in-situ polymerization of caprolactam. Polymer Composites 7(5): 383-394

Zhang, Z.U.O.G.U.A.N.G.; Hao, J.I.J.U.N.; Li, M.I.N.; Gu, Y.I.Z.U.O.; Sun, Z.H.I.J.I.E. 2009: Mechanical Performance of X-Truss/Foam Sandwich Construction. Journal of Reinforced Plastics and Composites 28(21): 2631-2643

Domingo, B.J.; Morris, S.A. 1999: Mechanical performance studies on extruded cornstarch-based plastic manufactures. Journal of Applied Polymer Science 71(13): 2147-2154

Shengnan, S.H.E.N.; Bo, L.I.U.; Shengkai, Y.U.; Hejun, D.U. 2009: Mechanical Performance Study of Pattern Media-Based Head-Disk Systems. Ieee Trans. Magn 45(11): 5002-5005

Buet Gautier, K.; Lhostis, G.; Laurent, F.; Durand, B. 2009: Mechanical performances of a thermal activated composite. Composites Science and Technology 69(15-16): 2633-2639

Hossain, M.K.; Dewan, M.W.; Hosur, M.; Jeelani, S. 2011: Mechanical performances of surface modified jute fiber reinforced biopol nanophased green composites. Composites. Part B, Engineering 42(6): 1701-1707

Tomita, M.; Murakami, M.; Nariki, S.; Sawa, K. 2002: Mechanical persistent current switch made of resin-impregnated bulk superconductors. Pasreg 2001: International Workshop on Processing and Applications of Superconducting 15(5): 846-849

Jong, W.R.; Peng, S.H.; Tsai, H.C. 2011: Mechanical phenomena of a new-type anisotropic conductive film adhering to the outer lead bonding. International Communications in Heat and Mass Transfer 38(4): 449-455

Ghosh, S.; Tao, K.A.N.G.; Wang, H.; Yanfen, H.U.; Rong, L.I. 2011: Mechanical phenotype is important for stromal aromatase expression. Steroids 76(8): 797-801

Ashok, B.T.; Musarrat, J. 1999: Mechanical, physico-chemical and microbial analysis of oil refinery waste receiving agricultural soil. Indian Journal of Environmental Health 41(3): 207-216

Sakamoto, S. 1991: Mechanical planning and actual test results of a robot for painting the exterior walls of high-rise buildings. Advanced Robotics 5(4): 457-466

Fust, A.; Stephens, N.L. 2005: Mechanical plasticity and contractile properties of airway smooth muscle. Can. J. Physiol. Pharmacol 83(10): 865-868

Uematsu, K.; Funami, K. 2000: Mechanical plating of metals by zinc powder ejection method. Zairyo 49(6): 655-660

Osaka, T.; Nagano, Y.; Watanabe, M. 1992: Mechanical plating of steel by Zn-Fe alloy powder ejection. Hyomen Gijutsu 43(8): 779-784

Kanou, M.; Osawa, T.; Shimozawa, T. 1989: Mechanical polarization in the air-current sensory hair of a cricket. Experientia 45(11-12): 1082-1083

Goldfracht, E.; Rosenhouse, G. 1986: Mechanical power flow between stiffened plates and viscoelastic discrete systems. Journal of Vibration, Acoustics, Stress, and Reliability in Design 108(2): 155-164

Bizon, B. 1997: Mechanical pre-cutting at Pech Brunet - Prédécoupage mécanique à Pech Brunet. T and T International 29(9): 43-44

Neef, K.; Choi, Y.H.; Perumal Srinivasan, S.; Treskes, P.; Cowan, D.B.; Stamm, C.; Rubach, M.; Adelmann, R.; Wittwer, T.; Wahlers, T. 2012: Mechanical preconditioning enables electrophysiologic coupling of skeletal myoblast cells to myocardium. Journal of Thoracic and Cardiovascular Surgery 144(5): 1176-1183

Constantin, B.; Durand, J.P.; Thone, M. 1998: Mechanical precutting at Toulon - Prédécoupage mécanique à Toulon. Tunnels and Tunnelling 30(10): 34-37

Michael, P.C.; Vieira, R.; Jayakumar, R.V.; Kato, T.; Nakajima, H.; Sugimoto, M. 2001: Mechanical preloading of the central solenoid model coil. Ieee Trans. Appl. Supercond 11(1): 1877-1880

Tedesco, S.; Benyounis, K.Y.; Olabi, A.G. 2013: Mechanical pretreatment effects on macroalgae-derived biogas production in co-digestion with sludge in Ireland. International Conference on Sustainable Energy and Environmental Protection Seep 2012 61: 27-33

Tonshoff, H.K.; Mohlfeld, A.; Gey, C.; Winkler, J. 1999: Mechanical pretreatment for improved adhesion of diamond coatings. Pse-98: International Conference on Plasma Surface Engineering 116-119: 440-446

Orourke, M. 1995: Mechanical principles in arterial disease. Hypertension (Dallas Tex., 1979) 26(1): 2-9

Krodel, A. 1996: Mechanical principles of compressive interbody fusion. Spine (Philadelphia, Pa 1976) 21(7): 821-826

Haimin, Y.A.O.; Huajian, G.A.O. 2007: Mechanical principles of robust and releasable adhesion of gecko. Journal of Adhesion Science and Technology 21(12-13): 1185-1212

Roberts, C.D. 1998: Mechanical principles of rolling. Iron and Steelmaker 25(6): 57-59

Cantat, I.; Pitois, O. 2005: Mechanical probing of liquid foam ageing. J. Phys., Condens. Matter (Print) 17(45): 3455-S3461

Wang, R. 1995: Mechanical problems in geodynamics and work done in China. Pure Appl. Geophys 145(3-4): 403-423

Ikegami, K. 1990: Mechanical problems in the production process of semiconductor devices. Jsme International Journal. Series 1, Solid Mechanics, Strenght of Materials 33(1): 1-12

Takakuda, K.; Fujii, S.; Myairi, H.; Koizumi, T.; Muneta, T. 1993: Mechanical problems in the reconstruction of anterior cruciate ligaments: mechanical compatibility between living tissues and artificial materials. Jsme International Journal. Series A, Mechanics and Material Engineering 36(3): 327-332

Kraemer, F.; Wiese, S.; Peter, E.; Seib, J. 2013: Mechanical Problems of Novel Back Contact Solar Modules : Thermal, Mechanical and Multi-Physics Simulation and Experiments in Micro-Electronics and Micro-Systems. Eurosime 2012 International Conference 53(8): 1095-1100

Perdriolle, R.; Becchetti, S.; Vidal, J.; Lopez, P. 1993: Mechanical process and growth cartilages : essential factors in the progression of scoliosis. Spine (Philadelphia, Pa 1976) 18(3): 343-349

Ikeya, T.; Kumai, K.; Iwahori, T. 1993: Mechanical process for enhancing metal hydride for the anode of a Ni-MH secondary battery. Journal of the Electrochemical Society 140(11): 3082-3086

Yongfeng, M.E.N.; Rieger, J.; Endeler, H.F.; Lilge, D. 2003: Mechanical α-process in polyethylene. Macromolecules 36(13): 4689-4691

Deidda, C.; Delogu, F.; Maglia, F.; Anselmitamburini, U.; Cocco, G. 2004: Mechanical processing and self-sustaining high-temperature synthesis of TiC powders. Rapidly Quenched and Metastable Materials. International Conference 375-377: 800-803

Wong, R.; Cunningham, K. 2006: Mechanical processing of aluminium alloy components and its effect on fluorescent penetrant indications. Materials Evaluation 64(12): 1180-1186

Bulandr, J.; Dudek, J. 1983: Mechanical processing of bentonites. Ceramics International 9(4): 132-137

Asaro, R.J.; Ahzi, S.; Blumenthal, W.; Digiovanni, A. 1992: Mechanical processing of high Jc BSCCO superconductors. Philosophical Magazine. A. Physics of Condensed Matter. Defects and Mechanical Properties 66(4): 517-538

Rawers, J.C.; Doan, R.C. 1994: Mechanical processing of iron powders in reactive and nonreactive gas atmospheres. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science 25(2): 381-388

Hu, D.; Hu, Y.; Li, C. 2002: Mechanical product disassembly sequence and path planning based on knowledge and geometric reasoning. International Journal of Advanced Manufacturing Technology 19(9): 688-696

Rodrigues, P.C.M.; Pereloma, E.V.; Santos, D.B. 2000: Mechanical properities of an HSLA bainitic steel subjected to controlled rolling with accelerated cooling. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 283(1-2): 136-143

Jang, J.; Han, S. 1999: Mechanical propertiès of glass-fibre mat/PMMA functionally gradient composite. Composites. Part A, Applied Science and Manufacturing 30(9): 1045-1053

Fernandez, L.; Mohan Malhotra, V. 1990: Mechanical properties, abrasian resistance, and chloride permeability of concrete incorporating granulated blast-furnace slag - Propriétés mécaniques, résistance à l'abrasion et perméabilité aux chlorures de béton incluant du laitier granulé de haut fourneau. Cement, Concrete and Aggregates 12(2): 87-100

Aperador Chaparro, W.; Martinez Bastidas, D.; Hernando Bautistaruiz, J. 2012: Mechanical properties and absorption of chlorides in alkali activated slag concrete and exposed to carbonation. Revista Facultad de Ingenieria Universidad de Antioquia (62): 189-195

Muktepavela, F.; Maniks, J. 1998: Mechanical properties and accommodation processes on metallic interfaces. Nanostruct. Mater 10(3): 479-484

Michalske, T.A.; Bunker, B.C.; Keefer, K.D. 1990: Mechanical properties and adhesion of hydrated glass surface layers. J. Non-Cryst. Solids 120(1-3): 126-137

Muller, D.; Fromm, E. 1995: Mechanical properties and adhesion strength of TiN and Al coatings on HSS, steel, aluminium and copper characterized by four testing Methods. International Conference on Metallurgical Coatings and Thin Films Icmctf 95 270(1-2): 411-416

Ke, L.I.U.; Wenbo, D.U.; Qingfeng, W.A.N.G.; Zhaohui, W.A.N.G.; Shubo, L.I.; Zhaolong, F.U. 2012: Mechanical properties and ageing response of the Mg―6Zn―1Er alloy produced by a new method of RPW process. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 556: 567-572

Park, E.S. 2008: Mechanical Properties and Antibacterial Activity of Peroxide-Cured Silicone Rubber Foams. Journal of Applied Polymer Science 110(3): 1723-1729

Yang, H.S.; Park, E.S. 2006: Mechanical properties and antimicrobial activity of silicone rubber compounds containing acrylated norfloxacin and its polymer. Macromolecular Materials and Engineering 291(6): 621-628

Otsuki, T.; Wulin, Q.I.U.; Hirotsu, T. 2005: Mechanical properties and applications for floor tiles of a composite from clay and maleated polyethylene. Journal of Applied Polymer Science 96(4): 1176-1182

Seung Bum, P.A.R.K.; Bi, L.E.E. 1990: Mechanical properties and applications of carbon-fiber-reinforced cement composites - Propriétés mécaniques et applications de composites de ciment renforcé aux fibres de carbone. International Symposium on the Development of Carbon Fibres and their Applications 22(6): 663-670

Meiguang, Z.H.A.N.G.; Haiyan, Y.A.N.; Yaru, Z.H.A.O.; Qun, W.E.I. 2014: Mechanical properties and atomistic deformation mechanism of spinel-type BeP2N4. Computational Materials Science 83: 457-462

Wang, J.Y.; Zhou, Y.C.; Lin, Z.J. 2007: Mechanical properties and atomistic deformation mechanism of γ-Y2Si2O7 from first-principles investigations. Acta Materialia 55(17): 6019-6026

Krieger, M.; Estrin, Y.; Janetek, M.; Niemeyer, M.; Paul, S. 2006: Mechanical properties and bake hardening behaviour of two cold rolled multiphase sheet steels subjected to CGL heat treatment simulation. Steel Research International 77(9-10): 668-674

Ramon, O.; Mizrahi, S.; Miltz, J. 1990: Mechanical properties and behavior of open cell foams used as cushioning materials. Polymer Engineering and Science 30(4): 197-201

Diehl, A.; Engel, U.; Geiger, M. 2008: Mechanical properties and bending behaviour of metal foils. Proc. Inst. Mech. Eng., B J. Eng. Manuf 222(1): 83-91

Minyi, F.U.; Jiangxing, C.H.E.N.; Zhengkuan, J.I.A.O.; Kumakura, H.; Togano, K.; Liren, D.I.N.G.; Yong, Z.H.A.N.G.; Zhiyou, C.H.E.N.; Hanmin, H.A.N.; Jinglin, C.H.E.N. 2004: Mechanical properties and bending strain effect on Cu-Ni sheathed MgB2 superconducting tape. Physica. C. Superconductivity 406(1-2): 53-57

Alizadeh, P.; Marghussian, V.K. 2002: Mechanical properties and bioactive characteristics of glass-ceramics. American Ceramic Society Bulletin 81(3): 21-26

Shibata, M.; Oyamada, S.; Kobayashi, S.I.; Yaginuma, D. 2004: Mechanical properties and biodegradability of Green composites based on biodegradable polyesters and lyocell fabric. Journal of Applied Polymer Science 92(6): 3857-3863

Bikiaris, D.; Aburto, J.; Alric, I.; Borredon, E.; Botev, M.; Betchev, C.; Panayiotou, C. 1999: Mechanical properties and biodegradability of LDPE blends with fatty-acid esters of amylose and starch. Journal of Applied Polymer Science 71(7): 1089-1100

Jun, Z.H.A.O.; Kun, Y.U.; Liangjian, C.H.E.N.; Shaojun, L.I.; Yanan, H.U.; Lu, L.E.I. 2012: Mechanical properties and biodegradable behavior of Mg―6 %Zn―Ca3(PO4)2 metal matrix composites in Ringer's solution. International Journal of Materials Research 103(6): 723-728

Flores, E.D.; Funabashi, M.; Kunioka, M. 2009: Mechanical Properties and Biomass Carbon Ratios of Poly(butylene succinate) Composites Filled with Starch and Cellulose Filler Using Furfural as Plasticizer. Journal of Applied Polymer Science 112(6): 3410-3417

Baradaran, S.; Moghaddam, E.; Basirun, W.J.; Mehrali, M.; Sookhakian, M.; Hamdi, M.; Moghaddam, M.R.N.; Alias, Y. 2014: Mechanical properties and biomedical applications of a nanotube hydroxyapatite-reduced graphene oxide composite. Carbon (New York) 69: 32-45

Tanrattanakul, V.; Petchkaew, A. 2006: Mechanical properties and blend compatibility of natural rubber -chlorosulfonated polyethylene blends. Journal of Applied Polymer Science 99(1): 127-140

Li, B.J.; Chao, C.G. 1996: Mechanical properties and 95°C aging characteristics of zircon-reinforced Zn-4Al-3Cu alloy. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science 27(3): 809-818

Mukhopadhyay, J.; Mallik, A.K.; Rao, A.M. 1988: Mechanical properties and cavitation during superplastic deformation of Al-Mg alloys - Propriétés mécaniques et cavitation lors de la déformation superplastique des alliages Al-Mg. Transactions of the Japan Institute of Metals 29(11): 911-919

Malkow, T.; Arcegarcia, I.; Kolitsch, A.; Schneider, D.; Bull, S.J.; Page, T.F. 2001: Mechanical properties and characterisation of very thin CNx films synthesised by IBAD. Diamond and Related Materials 10(12): 2199-2211

Finlay, J.; Hill, M.J.; Barham, P.J.; Byrne, K.; Woogara, A. 2003: Mechanical properties and characterization of slowly cooled isotactic polypropylene/high-density polyethylene blends. Journal of Polymer Science. Part B. Polymer Physics 41(12): 1384-1392

Cerrada, P.; Oriol, L.; Pinol, M.; Serrano, J.L.; Iribarren, I.; Munoz Guerra, S. 1996: Mechanical properties and characterization of the crystalline structure in annealed thermotropic poly(azomethines). Macromolecules 29(7): 2515-2523

Ji, Z.W.; Hu, C.H.; Wang, D.H.; Yan, Z.H.O.N.G.; Jiong, Y.A.N.G.; Zhang, W.Q.; Zhou, H.Y. 2012: Mechanical properties and chemical bonding of the Os―B system: A first-principles study. Acta Materialia 60(10): 4208-4217

Kim, N.K.; Hung, Y.C. 1991: Mechanical properties and chemical composition of peanuts as affected by harvest date and maturity. Journal of Food Science 56(5): 1378-1381

Tijsma, E.J.; Van der Does, L.; Bantjes, A.; Vulic, I. 1994: Mechanical properties and chemical stability of pivalolactone-based poly(ether ester)s. Polymer (Guildford) 35(25): 5483-5490

Couppe, C.; Hansen, P.; Kongsgaard, M.; Kovanen, V.; Suetta, C.; Aagaard, P.; Kjaer, M.; Magnusson, S.P. 2009: Mechanical properties and collagen cross-linking of the patellar tendon in old and young men. Journal of Applied Physiology (1985) 107(3): 880-886

Chiu, H.T.; Chuang, C.Y. 2008: Mechanical Properties and Compatibility of Sulfonated Poly(ethylene terephthalate)/Cyclic Olefin Copolymer/ Maleic Anhydride-Grafted Polyethylene-Octene Elastomer. Polymer-Plastics Technology and Engineering (Softcover Ed) 47(7-9): 649-654

Favier, A.; Habert, G.; Despinose de Lacaillerie, J.B.; Roussel, N. 2013: Mechanical properties and compositional heterogeneities of fresh geopolymer pastes. Cement and Concrete Research 48: 9-16

Gorbunova, L.Y.U.; Kerber, M.L.; Barashkov, O.K.; Stepanova, A.V. 1994: Mechanical properties and comptability of high density polyethylene with some oligoesters. International Journal of Polymeric Materials 27(1-2): 101-104

Siying, C.H.E.N.; Chenguang, H.U.A.N.G.; Chunkui, W.A.N.G.; Zhuping, D.U.A.N. 2008: Mechanical properties and constitutive relationships of 30CrMnSiA steel heated at high rate. Meeting of the International Conference on the Strength of Materials 483-484: 105-108

Belmonte, M.; Miranzo, P.; Osendi, M.I. 2007: Mechanical properties and contact damage behavior in aligned silicon nitride materials. Journal of the American Ceramic Society 90(4): 1157-1163

Lee, S.M.; Kim, T.W.; Lim, H.J.; Kim, C.; Kim, Y.W.; Lee, K.S. 2007: Mechanical properties and contact damages of nanostructured silicon carbide ceramics. Nippon Seramikkusu Kyokai Gakujutsu Ronbunshi 115(5): 304-309

Chunling, Q.I.N.; Wei, Z.H.A.N.G.; Amiya, K.; Asami, K.; Inoue, A. 2007: Mechanical properties and corrosion behavior of (Cu0.6Hf0.25Ti0.15)90Nb10 bulk metallic glass composites. Rq 12 : International Conference on Rapidly Quenched and Metastable Materials 449-451: 230-234

Viala, J.C.; El Morabit, M.; Bouix, J. 1985: Mechanical properties and corrosion behavior of lead-silicon carbide fiber and lead-carbon fiber composites made by electrodeposition - Propriétés mécaniques et comportement à la corrosion des matériaux composites fibres de carbone silicium-plomb et fibres de carbone-plomb fabriquées par électrodéposition. Materials Chemistry and Physics 13(5): 393-408

Ganesan, P.; Sagues, A.; Sethi, V. 1984: Mechanical properties and corrosion behavior of materials exposed to an experimental, atmospheric fluidized-bed combustor - Propriétés mécaniques et comportement à la corrosion de matériaux exposés à une chambre de combustion expérimentale à lit fluidisé atmosphérique. Journal of Materials for Energy Systems 6(1): 38-49

Schluter, K.; Zamponi, C.; Hapke, J.; Hort, N.; Kainer, K.U.; Quandt, E. 2013: Mechanical properties and corrosion behaviour of freestanding, precipitate-free magnesium WE43 thin films. International Journal of Materials Research 104(3): 286-292

Okazaki, Y.; Kyo, K.; Ito, Y.; Tateishi, T. 1995: Mechanical properties and corrosion fatigue of new titanium alloys for medical implants in physiological saline solution. Nippon Kinzoku Gakkaishi (1952) 59(10): 1078-1083

Ping, H.U.A.N.G.; Rong, L.I.U.; Wu, X.J.; Yao, M.X. 2007: Mechanical properties and corrosion resistance of a novel Ni-Cr-Mo alloy. Advanced Engineering Materials 9(1-2): 60-64

Sakamoto, Y.; Shibuta, C.; Sanuki, S.; Mae, T.; Notoya, H.; Arai, K. 1999: Mechanical properties and corrosion resistance of Al-Mg alloys with Cu added by electron beam welding. Materials Transactions - Jim 40(6): 556-563

Chen, Y.Y.; Tzeng, H.J.; Wei, L.I.; Shih, H.C. 2005: Mechanical properties and corrosion resistance of low-alloy steels in atmospheric conditions containing chloride. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 398(1-2): 47-59

Jiao, M.I.A.O.; Bing, Y.E.; Qudong, W.A.N.G.; Tao, P.E.N.G. 2013: Mechanical properties and corrosion resistance of Mg―10Gd―2Y―0.5Zr alloy by hot extrusion solid-state recycling. Journal of Alloys and Compounds 561: 184-192

Trejo, D.; Monteiro, P.; Thomas, G.; Xueyao, W.A.N.G. 1994: Mechanical properties and corrosion susceptibility of dual-phase steel in concrete. Cement and Concrete Research 24(7): 1245-1254

Guettler, B.E.; Moresoli, C.; Simon, L.C. 2013: Mechanical Properties and Crack Propagation of Soy-Polypropylene Composites. Journal of Applied Polymer Science 130(1): 175-185

Hiebler, H.; Bernhard, C. 1999: Mechanical properties and crack susceptibility of steel during solidification. Steel Research 70(8-9): 349-355

Doh, G.H.; Kang, I.A.; Lee, S.Y.; Kong, Y.T.; Jeong, C.S.; Lim, B.S. 2005: Mechanical properties and creep behavior of liquefied wood polymer composites (LWPC). Composite Structures 68(2): 225-233

Stulikova, I.; Smola, B.; Von Buch, F.; Mordike, B.L. 2003: Mechanical properties and creep of Mg - rare earth - Sc - Mn squeeze cast alloys. Materialwissenschaft und Werkstofftechnik 34(1): 102-108

Bin, X.U.; Simonsen, J.; Rochefort, W.E. 2000: Mechanical properties and creep resistance in polystyrene/polyethylene blends. Journal of Applied Polymer Science 76(7): 1100-1108

Chaikumpollert, O.; Yamamoto, Y.; Suchiva, K.; Kawahara, S. 2012: Mechanical properties and cross-linking structure of cross-linked natural rubber. Polymer Journal 44(8): 772-777

Yubo, G.U.O.; Lianshi, W.A.N.G.; Anqiang, Z.H.A.N.G. 2006: Mechanical properties and crosslink density of rare earth-modified high-abrasion furnace-filled powdered natural rubber. Journal of Applied Polymer Science 102(2): 1755-1762

Ohta, M.; Kamiishi, Y. 1997: Mechanical properties and crosslinking structure of water-soluble vinylon fibers treated with epoxides. Kobunshi Ronbunshu (Tokyo) 54(6): 412-416

Yingying, T.A.N.G.; Jingyi, W.A.N.G.; Hongbing, J.I.A.; Lifeng, D.I.N.G.; Qi, J.I.A.N.G. 2013: Mechanical Properties and Crystallization Behavior of High Fluidity Polypropylene/Metallocene Poly(ethylene-butene-hexene) Copolymer Blends. Journal of Applied Polymer Science 130(4): 2557-2562

Zhang, J.F.; Xiuzhi, S.U.N. 2004: Mechanical properties and crystallization behavior of poly(lactic acid) blended with dendritic hyperbranched polymer. Polymer International 53(6): 716-722

Yang, X.U.; Zhidan, S.U.N.; Xiaolang, C.H.E.N.; Man, C.H.E.N.; Shuchun, H.U.; Zhibin, Z.H.A.N.G. 2013: Mechanical Properties and Crystallization Behavior of Polycarbonate/Polypropylene Blends. Journal of Macromolecular Science. Physics 52(4-6): 716-725

Li, H.U.A.N.G.; Renbo, Z.H.A.N.; Yafei, L.U. 2006: Mechanical properties and crystallization behavior of polypropylene/nano-SiO2 composites. Journal of Reinforced Plastics and Composites 25(9): 1001-1012

Anran, Z.E.N.G.; Yuying, Z.H.E.N.G.; Shangchang, Q.I.U.; Yong, G.U.O.; Baoming, L.I. 2011: Mechanical properties and crystallization behavior of polypropylene with cyclodextrin derivative as β-nucleating agent. Colloid and Polymer Science 289(10): 1157-1166

Papageorgiou, G.Z.; Palani, A.; Gilliopoulos, D.; Triantafyllidis, K.S.; Bikiaris, D.N. 2013: Mechanical properties and crystallization of high-density polyethylene composites with mesostructured cellular silica foam. J. Therm. Anal. Calorim 113(3): 1651-1665

Riyajan, S.A.; Chaiponban, S.; Chusri, S.; Piyawan Voravuthikunchai, S. 2012: Mechanical Properties and Cure test of a Natural Rubber/Poly(Vinyl Alcohol) Blend. Rubber Chemistry and Technology 85(1): 147-156

Abdelazim Aa, A. 1995: Mechanical properties and curing characteristics of unsaturated polyesters synthesized for large casting. Polymer Bulletin (Berlin. Print) 35(1-2): 229-236

Kvasnicka, I. 1983: Mechanical properties and cutting performance of sintered M2 high speed steel - Caractéristiques mécaniques et usinabilité de l'acier rapide frité M2. Powder Metallurgy 26(3): 145-148

Tamari, N.; Tanaka, T.; Kondoh, I.; Tezuka, K.; Yamamoto, T. 1996: Mechanical properties and cutting performance of titanium carbide whisker/alumina composites. Nippon Seramikkusu Kyokai Gakujutsu Ronbunshi 104(5): 439-443

Watanabe, T.; Nakanishi, T.; Shobu, K.; Tani, E. 1994: Mechanical properties and cutting tool performance of Ti(C0.5, N0.5)-based ceramics. International Journal of the Japan Society for Precision Engineering 28(3): 224-226

Nakanishi, T.; Kobayashi, T.; Miyazaki, T. 2007: Mechanical properties and cyclic fatigue of the newly developed ceramic material for artificial joints. Nippon Seramikkusu Kyokai Gakujutsu Ronbunshi 115(8): 466-470

Takahashi, H.; Shindo, Y.; Kinoshita, H.; Shibayama, T.; Ishiyama, S.; Fukaya, K.; Eto, M.; Kusuhashi, M.; Hatakeyama, T.; Sato, I. 1998: Mechanical properties and damage behavior of non-magnetic high manganese austenitic steels. J. Nucl. Mater 258263: 1644-1650

Dexter, H.B.; Hasko, G.H. 1996: Mechanical properties and damage tolerance of multiaxial warp-knit composites. Composites Science and Technology 56(3): 367-380

Ziqi, S.U.N.; Jingyang, W.A.N.G.; Meishuan, L.I.; Yanchun, Z.H.O.U. 2008: Mechanical properties and damage tolerance of Y2SiO5. Journal of the European Ceramic Society 28(15): 2895-2901

Xie, X.Q.; Fan, T.X.; Di, Z.H.A.N.G.; Sakata, T.; Mori, H. 2002: Mechanical properties and damping behavior of woodceramics/ZK60a Mg alloy composite. Materials Research Bulletin 37(6): 1133-1140

Zhang, X.I.U.Q.I.N.G.; Liao, L.I.H.U.A.; Ma, N.A.I.H.E.N.G.; Wang, H.A.O.W.E.I. 2006: Mechanical properties and damping capacity of magnesium matrix composites. Composites. Part A, Applied Science and Manufacturing 37(11): 2011-2016

Jinhai, G.U.; Xiaonong, Z.H.A.N.G.; Mingyuan, G.U. 2004: Mechanical properties and damping capacity of (SiCp + Al2O3.SiO2f)/Mg hybrid metal matrix composite. Journal of Alloys and Compounds 385: 104-108

Zhang, X.I.A.O.N.O.N.G.; Zhang, D.I.; Wu, R.E.N.J.I.E.; Zhu, Z.H.E.N.G.A.N.G.; Wang, C.A.N. 1997: Mechanical properties and damping capacity of (SiCw+B4Cp)/ZK60A mg alloy matrix composite. Scripta Materialia 37(11): 1631-1635

Li, L.I.; Xinming, Z.H.A.N.G.; Changping, T.A.N.G.; Yunlai, D.E.N.G.; Nan, Z.H.O.U. 2010: Mechanical properties and deep drawability of Mg-Gd-Y-Zr alloy rolling sheet at elevated temperatures. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 527(4-5): 1266-1274

Xiaoqing, L.I.; Chong, Z.H.A.N.G.; Jijun, Z.H.A.O.; Johansson, B. 2011: Mechanical properties and defective effects of bcc V-4Cr-4Ti and V-5Cr-5Ti alloys by first-principles simulations. Computational Materials Science 50(9): 2727-2731

Sherafat, Z.; Paydar, M.H.; Ebrahimi, R.; Sohrabi, S. 2010: Mechanical properties and deformation behavior of Al/Al7075, two-phase material. Journal of Alloys and Compounds 502(1): 123-126

Woo, K.D.; Kim, S.W.; Tai Ping, L.O.U. 2002: Mechanical properties and deformation behavior of Al-4Mg-0.4Sc-1.5Mm alloy at room temperature. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 334(1-2): 257-261

Chang, S.Y.; Lee, Y.S.; Hsiao, H.L.; Chang, T.K. 2006: Mechanical properties and deformation behavior of amorphous nickel-phosphorous films measured by nanoindentation test. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science 37(10): 2939-2945

Hsu, H.C.; Wu, S.C.; Hong, Y.S.; Ho, W.F. 2009: Mechanical properties and deformation behavior of as-cast Ti―Sn alloys. Journal of Alloys and Compounds 479(1-2): 390-394

Ho, W.F.; Chiang, T.Y.; Wu, S.C.; Hsu, H.C. 2009: Mechanical properties and deformation behavior of cast binary Ti-Cr alloys. Journal of Alloys and Compounds 468(1-2): 533-538

Konieczny, M. 2013: Mechanical properties and deformation behavior of laminated Ni-(Ni2Al3+NiAl3) and Ni-(Ni3Al+NiAl) composites. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 586: 11-18

Dair, B.J.; Honeker, C.C.; Alward, D.B.; Avgeropoulos, A.; Hadjichristidis, N.; Fetters, L.J.; Capel, M.; Thomas, E.L. 1999: Mechanical properties and deformation behavior of the double gyroid phase in unoriented thermoplastic elastomers. Macromolecules 32(24): 8145-8152

Ho, W.F.; Pan, C.H.; Wu, S.C.; Hsu, H.C. 2009: Mechanical properties and deformation behavior of Ti-5Cr-xFe alloys. Journal of Alloys and Compounds 472(1-2): 546-550

Xu, X.Y.; Xu, X.F. 2011: Mechanical Properties and Deformation Behaviors of Acrylonitrile-Butadiene-Styrene Under Izod Impact Test and Uniaxial Tension at Various Strain Rates. Polymer Engineering and Science 51(5): 902-907

Rengen, D.I.N.G.; Jones, I.P. 2008: Mechanical properties and deformation behaviour of a niobium alloy with different carbon contents. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 497(1-2): 301-308

Inoue, A.; Yokoyama, Y.; Masumoto, T. 1994: Mechanical properties and deformation behaviour of large Al70Pd20Mn10 single quasi-crystals. International Conference on Rapidly Quenched and Metastable Materials 181-182: 850-855

Shitong, Z.H.O.U.; Weiwei, L.V.; Peng, L.I.; Yulan, G.O.N.G.; Jingmei, T.A.O.; Lianping, C.H.E.N.G.; Xinkun, Z.H.U. 2014: Mechanical properties and deformation kinetics of bulk Cu―Al―Zn alloy subjected to rolling and annealing. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 609: 217-221

Tashiro, K.; Kobayashi, M.; Tadokoro, H. 1994: Mechanical properties and deformation mechanism of polyoxymethylene chain in the crystalline state. Polymer Engineering and Science 34(4): 308-317

Jar Py, B.; Creagh, D.C.; Konishi, K.; Shinmura, T. 2002: Mechanical properties and Deformation mechanisms in high thermal resistant poly(acrylonitrile-butadiene-styrene) under static tension and Izod impact. Journal of Applied Polymer Science 85(1): 17-24

Nematnasser, S.; Guo, W.G.; Cheng, J.Y. 1999: Mechanical properties and deformation mechanisms of a commercially pure titanium. Acta Materialia 47(13): 3705-3720

Bobrov, V.S.; Dilanyan, R.A.; Fomenko, L.S.; Iunin Yu, L.; Lebyodkin, M.A.; Lubenets, S.V.; Orlov, V.I.; Ossipyan Yu, A. 1995: Mechanical properties and deformation of fullerites. Journal of Superconductivity 8(1): 1-3

Tibbitt, M.W.; Kloxin, A.M.; Sawicki, L.A.; Anseth, K.S. 2013: Mechanical Properties and Degradation of Chain and Step-Polymerized Photodegradable Hydrogels. Macromolecules 46(7): 2785-2792

Johnson, A.F.; Sims, G.D. 1986: Mechanical properties and design of sandwich materials. Composites 17(4): 321-328

Kaddour, A.S.; Hinton, M.J.; Smith, P.A.; Li, S. 2013: Mechanical properties and details of composite laminates for the test cases used in the third world-wide failure exercise. Journal of Composite Materials 47(20-21): 2427-2442

Cao, G.H.; Becker, A.T.; Wu, D.; Chumbley, L.S.; Lograsso, T.A.; Russell, A.M.; Gschneidner, K.A. 2010: Mechanical properties and determination of slip systems of the B2 YZn intermetallic compound. Acta Materialia 58(12): 4298-4304

Ramirez, M.A.; Rubiomarcos, F.; Fernandez, J.F.; Lengauer, M.; Bueno, P.R.; Longo, E.; Arana Varela, J. 2008: Mechanical Properties and Dimensional Effects of ZnO-and SnO2-Based Varistors. Journal of the American Ceramic Society 91(9): 3105-3108

Jieming, C.H.E.N.; Ning, Y.A.N. 2013: Mechanical properties and dimensional stability of organo-nanoclay modified biofiber polymer composites. Composites. Part B, Engineering 47: 248-254

Arkhangelskii, S.I.; Tikhpnova, I.V.; Goncharov, S.S. 1993: Mechanical properties and dimensional stability of the V96Ts1 alloy during two-stage aging. Metal Science and Heat Treatment 35(3-4): 223-228

Yonenaga, I. 1997: Mechanical properties and dislocation dynamics in III-V compounds. J. Phys., Iii (Print) 7(7): 1435-1450

Yonenaga, I.; Sumino, K. 1992: Mechanical properties and dislocation dynamics of III-V compound semiconductors. Physica Status Solidi. A. Applied Research 131(2): 663-670

Korner, A. 1991: Mechanical properties and dislocation structure on L12 long-range ordered Ni3Fe. Philosophical Magazine Letters 63(3): 117-122

Hamamoto, A.; Tanaka, T.; Kinoshita, M. 2000: Mechanical properties and dispersion behavior of composite materials compounded with surface treated titanium dioxides. Journal of Vinyl and Additive Technology 6(1): 20-25

Hamamoto, A.; Tanaka, T.; Kinoshita, M. 2002: Mechanical properties and dispersion behavior of composite materials compounded with surface treated titanium dioxides. Journal of Reinforced Plastics and Composites 21(7): 603-615

Weize, W.A.N.G.; Jiachun, L.I.A.N.G.; Xueping, G.U.O.; Fuzhen, X.U.A.N.; Huoxing, H.O.N.G. 2012: Mechanical Properties and Dissolution Behavior of Plasma Sprayed Wollastonite Coatings Deposited at Different Substrate Temperatures. Journal of Thermal Spray Technology 21(3-4): 496-504

Jakeways, C.V.; Harrison, R.J.; Redfem, S.A.T. 2006: Mechanical properties and domain wall mobility of LaGaO3 perovskite over a first-order phase transition. Mater. Sci. Eng. A Struct. Mater. Prop. Microstruct. Proces 442(1-2): 204-207

Yonghai, K.A.N.G.; Jun, Y.A.N.G.; Licai, F.U.; Qinling, B.I.; Weimin, L.I.U. 2012: Mechanical properties and dry-sliding tribological behavior of partially twinned Fe70Ni30 alloy. Wear 274-275: 395-400

Jin Yong, K.I.M.; Choi, J.P.; Weil, K.S. 2008: Mechanical properties and dual atmosphere tolerance of Ag-Al based braze. Int. J. Hydrogen Energy 33(14): 3952-3961

Delatte, N.; Sehdev, A. 2003: Mechanical properties and durability of bonded-concrete overlays and ultrathin whitetopping concrete. Transportation Research Record (1834): 16-23

Bouzoubaa, N.; Zhang, M.H.; Malhotra, V.M. 2001: Mechanical properties and durability of concrete made with high-volume fly ash blended cements using a coarse fly ash. Cement and Concrete Research 31(10): 1393-1402

Issa, A.; Khalil, A.A.; Islam, S.; Krauss, P.D. 2008: Mechanical properties and durability of high-performance concrete for bridge decks. Pci Journal 53(4): 108-130

Alireza, M.O.K.H.T.A.R.Z.A.D.E.H.; Kriesel, R.; French, C.; Snyder, M. 1995: Mechanical properties and durability of high-strength concrete for prestressed bridge girders. Transportation Research Record (1478): 20-29

Bonneau, O.; Lachemi, M.; Dallaire, E.; Dugat, J.; Aitcin, P.C. 1997: Mechanical properties and durability of two industrial reactive powder concretes. Aci Materials Journal 94(4): 286-290

Anuar, H.; Ahmad, S.H.; Rasid, R.; Ahmad, A.; Wan Busu, W.N. 2008: Mechanical Properties and Dynamic Mechanical Analysis of Thermoplastic-Natural-Rubber-Reinforced Short Carbon Fiber and Kenaf Fiber Hybrid Composites. Journal of Applied Polymer Science 107(6): 4043-4052

Benavente, R.; Perena, J.M.; Bello, A.; Perez, E.; Martinez, C.; Aguilar, C. 1990: Mechanical properties and dynamic mechanical relaxations of ethylene/alpha-olefin copolymers. British Polymer Journal 23(1-2): 95-100

Myung Ho, L.E.E.; Jun Hwan, K.I.M.; Byoung Kwon, C.H.O.I.; Yong Hwan, J.E.O.N.G. 2007: Mechanical properties and dynamic strain aging behavior of Zr-1.5Nb-0.4Sn-0.2Fe alloy. Journal of Alloys and Compounds 428(1-2): 99-105

Csernica, J.; Ganesan, S. 2005: Mechanical properties and effect of coupling agent in a polystyrene/flyash composite. Journal of Polymer Engineering 25(1): 1-10

De Rosa, C.; Auriemma, F.; Ruiz de Ballesteros, O. 2003: Mechanical properties and elastic behavior of high-molecular-weight poorly syndiotactic polypropylene. Macromolecules 36(20): 7607-7617

De Rosa, C.; Auriemma, F.; Corradi, M.; Caliano, L.; Ruiz de Ballesteros, O.; Di Girolamo, R. 2009: Mechanical Properties and Elastic Behavior of Syndiotactic Propene-Butene Copolymers. Macromolecules 42(13): 4728-4738

Gao, F.; Weber, W.J. 2004: Mechanical properties and elastic constants due to damage accumulation and amorphization in SiC. Physical Review B. Condensed Matter and Materials Physics 69(22): 224108.1-224108.10

Jelinek, P.; Perez, R.; Ortega, J.; Flores, F. 2004: Mechanical properties and electrical conductance of different Al nanowires submitted to an homogeneous deformation: a first-principles simulation. European Conference on Surface Science 566-568: 13-23

Meincke, O.; Kaempfer, D.; Weickmann, H.; Friedrich, C.; Vathauer, M.; Warth, H. 2004: Mechanical properties and electrical conductivity of carbon-nanotube filled polyamide-6 and its blends with acrylonitrile/butadiene/styrene. Polymer (Guildford) 45(3): 739-748

Mula, S.; Sahani, P.; Pratihar, S.K.; Mal, S.; Koch, C.C. 2011: Mechanical properties and electrical conductivity of Cu―Cr and Cu―Cr―4% SiC nanocomposites for thermo-electric applications. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 528(13-14): 4348-4356

Jingguo, L.I.; Lian, G.A.O.; Jingkun, G.U.O. 2003: Mechanical properties and electrical conductivity of TiN-Al2O3 nanocomposites. Journal of the European Ceramic Society 23(1): 69-74

Bellon, O.; Sammes, N.M.; Staniforth, J. 1998: Mechanical properties and electrochemical characterisation of extruded doped cerium oxide for use as an electrolyte for solid oxide fuel cells. Journal of Power Sources 75(1): 116-121

Huang, M.L.; Huang, Y.Z.; Ma, H.T.; Zhao, J. 2011: Mechanical Properties and Electrochemical Corrosion Behavior of Al/Sn-9Zn-xAg/Cu Joints. Journal of Electronic Materials 40(3): 315-323

Xiuquan, Z.H.O.U.; Gall, D.; Khare, S.V. 2014: Mechanical properties and electronic structure of anti-ReO3 structured cubic nitrides, M3N, of d block transition metals M: An ab initio study. Journal of Alloys and Compounds 595: 80-86

Naihua, M.I.A.O.; Baisheng, S.A.; Jian, Z.H.O.U.; Zhimei, S.U.N.; Ahuja, R. 2011: Mechanical properties and electronic structure of the incompressible rhenium carbides and nitrides: A first-principles study. Solid State Communications 151(23): 1842-1845

Bin, W.A.N.G.; Ying, L.I.U.; Yan, L.I.U.; Ye, J.W. 2012: Mechanical properties and electronic structure of TiC, Ti0.75W0.25C, Ti0.75W0.25C0.75N0.25, TiC0.75N0.25 and TiN. Physica. B, Condensed Matter 407(13): 2542-2548

Faruqi, M.A. 1998: Mechanical properties and endurance limit of fiber composite bars. Journal of Reinforced Plastics and Composites 17(17): 1512-1524

Lopez, I.; Fernandez Olmo, I.; Irabien, A. 2006: Mechanical properties and environmental assessment of mortars containing metallic oxides. Journal of Environmental Engineering (New York) 132(8): 949-955

Fischer, J.J.; Aoyagi, Y.; Enoki, M.; Doi, Y.; Iwata, T. 2004: Mechanical properties and enzymatic degradation of poly([R]-3-hydroxybutyrate-co-[R]-3-hydroxyhexanoate) uniaxially cold-drawn films. Polymer Degradation and Stability 83(3): 453-460

Tanaka, T.; Yabe, T.; Teramachi, S.; Iwata, T. 2007: Mechanical properties and enzymatic degradation of poly[(R)-3-hydroxybutyrate] fibers stretched after isothermal crystallization near Tg. Polymer Degradation and Stability 92(6): 1016-1024

Ishiaku, U.S.; Pang, K.W.; Lee, W.S.; Mohd, Z.A.; Ishak, U. S. 2002: Mechanical properties and enzymic degradation of thermoplastic and granular sago starch filled poly(ε-caprolactone). European Polymer Journal 38(2): 393-401

Sahoo, M.; Lui, A.; Morin, G.; Sikka, V.K. 1991: Mechanical properties and erosion behaviour of nickel aluminides. Canadian Metallurgical Quarterly 30(1): 55-69

Zhou, R.; Lu, D.H.; Jiang, Y.H.; Li, Q.N. 2005: Mechanical properties and erosion wear resistance of polyurethane matrix composites. International Conference on Wear of Materials 259(1): 676-683

Mori, R.; Haga, T.; Takagishi, T. 1999: Mechanical properties and fabric hand of cotton fabrics subjected to cellulase treatment. Sen'i Gakkaishi 55(10): 488-492

Wolf, W.D.; Vaidya, K.J.; Francis, L.F. 1996: Mechanical properties and failure analysis of alumina-glass dental composites. Journal of the American Ceramic Society 79(7): 1769-1776

Selzer, R.; Friedrich, K. 1997: Mechanical properties and failure behaviour of carbon fibre-reinforced polymer composites under the influence of moisture. Composites. Part A, Applied Science and Manufacturing 28(6): 595-604

Hiermer, T.; Schmittthomas, K.G.; Yanq, Z.G. 1998: Mechanical properties and failure behaviour of cylindrical CFRP-implant-rods under torsion load. Composites. Part A, Applied Science and Manufacturing 29(11): 1453-1461

Qian, D.E.N.G.; Shi, L.I.; Youping, C.H.E.N. 2012: Mechanical properties and failure mechanism of wood cell wall layers. Computational Materials Science 62: 221-226

Oya, N.; Hamada, H. 1997: Mechanical properties and failure mechanisms of carbon fibre reinforced thermoplastic laminates. Composites. Part A, Applied Science and Manufacturing 28(9-10): 823-832

Oommen, Z.; Thomas, S. 1997: Mechanical properties and failure mode of thermoplastic elastomers from natural rubber/poly(methyl methacrylate)/natural rubber-g-poly (methyl methacrylate) blends. Journal of Applied Polymer Science 65(7): 1245-1255

Miyagawa, H.; Foo, K.H.; Daniel, I.M.; Drzal, L.T. 2005: Mechanical properties and failure surface morphology of amine-cured epoxy/clay nanocomposites. Journal of Applied Polymer Science 96(2): 281-287

Bhagawan, S.S.; Kuriakose, B.; De, S.K. 1987: Mechanical properties and failure surfaces of gamma-ray irradiated systems based on thermoplastic 1,2 polybutadiene. Radiation Physics and Chemistry 30(2): 95-104

Wan, L.; Zuqi, H.U.; Shusen, W.U.; Xueqiang, L.I.U. 2013: Mechanical properties and fatigue behavior of vacuum-assist die cast AlMgSiMn alloy. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 576: 252-258

Tsay, L.W.; Li, Y.M.; Chen, C.; Cheng, S.W. 1992: Mechanical properties and fatigue crack growth rate of laser-welded 4130 steel. International Journal of Fatigue 14(4): 239-247

Ma, Y.E.; Zhenqiang, Z.H.A.O.; Baoqi, L.I.U.; Wenya, L.I. 2013: Mechanical properties and fatigue crack growth rates in friction stir welded nugget of 2198-T8 Al―Li alloy joints. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 569: 41-47

Nakaji, E.; Ikeda, S.; Kim, Y.C.; Nakatsuji, Y.; Horikawa, K. 1998: Mechanical properties and fatigue strength of high-manganese non-magnetic steel/carbon steel welded joints. Welding International 12(6): 455-460

Hussainova, I.; Kubarsepp, J.; Pirso, J. 2001: Mechanical properties and features of erosion of cermets. International Conference on Wear of Materials 250-251: 818-825

Tay, G.S.; Ong, L.N.; Rozman, H.D. 2012: Mechanical Properties and Fire Retardant Behavior of Polyurethane Foam Reinforced with Oil Palm Empty Fruit Bunch. Journal of Applied Polymer Science 125(1): 158-164

Kibble, K.A.; Xiao, W.D. 2008: Mechanical Properties and Flame Retardancy of SEBS-Based Composites Filled with Aluminium Hydroxide. Polymers and Polymer Composites 16(7): 423-430

Xiao, W.D.; Kibble, K.A.; Feng, L.I.N. 2009: Mechanical Properties and Flame Retardancy of SEBS-based Composites Filled with Magnesium Hydroxide. Polymers and Polymer Composites 17(2): 117-125

Xiaofeng, Y.A.N.G.; Qiaolin, L.I.; Zhiping, C.H.E.N.; Hongli, H.A.N.; Hongxia, J.I.N.G. 2009: Mechanical Properties and Flame Retardancy Research of Montmorillonite Intercalate Polyamide 66 Composites. Journal of Composite Materials 43(23): 2785-2792

Zhiyi, Z.H.A.N.G.; Yaqing, L.I.U.; Guizhe, Z.H.A.O. 2009: Mechanical Properties and Flammability of Polycarbonate Alloys Containing Nanosize Additives. Journal of Applied Polymer Science 114(1): 438-445

Suppakarn, N.; Jarukumjorn, K. 2009: Mechanical properties and flammability of sisal/PP composites: Effect of flame retardant type and content. Composites. Part B, Engineering 40(7): 613-618

Kuboki, T.; Lee, Y.H.; Park, C.B.; Sain, M. 2009: Mechanical Properties and Foaming Behavior of Cellulose Fiber Reinforced High-Density Polyethylene Composites. Polymer Engineering and Science 49(11): 2179-2188

Karasawa, N.; Siddharth, D.A.S.G.U.P.T.A.; Goddard, W.A. 1991: Mechanical properties and force field parameters for polyethylene crystal. Journal of Physical Chemistry (1952) 95(6): 2260-2272

Migakida, N.; Yarita, I. 2010: Mechanical properties and formability of AZ31 magnesium alloy sheet produced by asymmetric rolling with thrust force. Keikinzoku 60(1): 26-30

Mahmudi, R.; Roberts, W.T.; Wilson, D.V.; Furrer, P.; Rodrigues, P.M.B. 1987: Mechanical properties and formability of fine grained aluminium alloy sheet - Caractéristiques mécaniques et déformabilité d'une tôle d'aluminium à grains fins - Mechanische Eigenschaften und Umformbarkeit von feinkoernigem Aluminiumblech. Aluminium (Dusseldorf) 63(1): 62-66

Gall, S.; Coelho, R.S.; Muller, S.; Reimers, W. 2013: Mechanical properties and forming behavior of extruded AZ31 and ME21 magnesium alloy sheets. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 579: 180-187

Jelcic, Z.; Holjevacgrguric, T.; Rek, V. 2005: Mechanical properties and fractal morphology of high-impact polystyrene/poly(styrene-b-butadiene-b-styrene) blends. Polym. Degrad. Stab 90(2): 295-302

Radhakrishnan Nair, M.N.; Sukumar, P.; Jayashree, V.; Gopinathan Nair, M.R. 2010: Mechanical properties and fractography of block copolymers based on NR and MDI-based polyurethanes. Polymer Bulletin (Berlin. Print) 65(1): 83-96

Maeda, K.; Nakao, Y. 2003: Mechanical properties and fracture analysis of glass substrate for PDPs. J. Soc. Inf. Disp 11(3): 481-484

Jihong, S.H.E.; Inoue, T.; Suzuki, M.; Sodeoka, S.; Ueno, K. 2000: Mechanical properties and fracture behavior of Al2O3laminates with different architectures. Materials Letters (General Ed.) 46(2-3): 65-69

Zhemchuzhnikova, D.; Mogucheva, A.; Kaibyshev, R. 2013: Mechanical properties and fracture behavior of an Al―Mg―Sc―Zr alloy at ambient and subzero temperatures. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 565: 132-141

Xiaodong, L.I.U.; Boldizar, A.; Rigdahl, M.; Bertilsson, H. 2002: Mechanical properties and fracture behavior of blends of acrylonitrile-butadiene-styrene copolymer and crystalline engineering plastics. Journal of Applied Polymer Science 86(10): 2435-2448

She, J.; Inoue, T.; Suzuki, M.; Sodeoka, S.; Ueno, K. 2000: Mechanical properties and fracture behavior of fibrous Al2O3/SiC ceramics. Journal of the European Ceramic Society 20(12): 1877-1881

Musalek, R.; Hausild, P.; Siegl, J.; Bensch, J.; Slama, J. 2008: Mechanical Properties and Fracture Behavior of High-Strength Steels. International Conference Materials Structure and Micromechanics of Fracture 40(1): 142-145

Rehrl, J.; Mraczek, K.; Pichler, A.; Werner, E. 2014: Mechanical properties and fracture behavior of hydrogen charged AHSS/UHSS grades at high- and low strain rate tests. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 590: 360-367

Guan, G.O.N.G.; Xie, B.H.; Yang, M.B.; Wei, Y.A.N.G.; Zhang, W.Q.; Ming, Z.H.A.O. 2007: Mechanical properties and fracture behavior of injection and compression molded polypropylene/coal gangue powder composites with and without a polymeric coupling agent. Composites. Part A, Applied Science and Manufacturing 38(7): 1683-1693

Xu, Q.; Hayes, R.W.; Jr, W.H.H.; Lavernia, E.J. 1998: Mechanical properties and fracture behavior of layered 6061/SiCp composites produced by spray atomization and co-deposition. Acta Materialia 47(1): 43-53

Flores, O.; Romouribe, A.; Romeroguzman, M.E.; Gonzaez, A.E.; Cruzsilva, R.; Campillo, B. 2009: Mechanical Properties and Fracture Behavior of Polypropylene Reinforced with Polyaniline-Grafted Short Glass Fibers. Journal of Applied Polymer Science 112(2): 934-941

Satapathy, S.; Golok Bihari, N.A.N.D.O.; Jose, J.; Nag, A. 2008: Mechanical Properties and Fracture Behavior of Short PET Fiber-Waste Polyethylene Composites. Journal of Reinforced Plastics and Composites 27(9): 967-984

Jia, D.C.; Zhou, Y. 1998: Mechanical properties and fracture behavior of SiCw reinforced Al-12Ti alloy prepared by bechanical [mechanical] alloying technique. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 252(1): 44-52

Tahamtan, S.; Fadavi Boostani, A.; Nazemi, H. 2009: Mechanical properties and fracture behavior of thixoformed, rheocast and gravity-cast A356 alloy. Journal of Alloys and Compounds 468(1-2): 107-114

Xiang, X.I.O.N.G.; Wang, Y.L.; Chen, Z.K.; Li, G.D. 2009: Mechanical properties and fracture behaviors of C/C composites with PyC/TaC/PyC, PyC/SiC/TaC/PyC multi-interlayers. Solid State Sciences 11(8): 1386-1392

Tschegg, E.; Humer, K.; Weber, H.W. 1991: Mechanical properties and fracture behaviour of polyimide (SINTIMID) at cryogenic temperatures. Cryogenics (Guildford) 31(10): 878-883

Inoue, T.; Ueno, K. 1998: Mechanical properties and fracture behaviour of SiTiCO fibre/SiAlON composite. Ceramics International 24(8): 565-569

Qiu, K.Q.; Hu, N.N.; Zhang, H.B.; Jiang, W.H.; Ren, Y.L.; Liaw, P.K. 2009: Mechanical properties and fracture mechanism of as-cast Mg77TM12Zn5Y6 (TM = Cu, Ni) bulk amorphous matrix composites. Journal of Alloys and Compounds 478(1-2): 419-422

Zhan, M.S.; Kuriyama, T.; Narisawa, I.; Fujimoto, M. 1995: Mechanical properties and fracture mechanism of nylon 6/polyamide-elastomer alloys. Kobunshi Ronbunshu (Tokyo) 52(8): 484-490

Chang, H.L.; Kuo, C.T.; Liang, M.S. 2011: Mechanical properties and fracture mechanism of porous SiOCH low-k dielectrics. Microelectronic Engineering 88(7): 1623-1627

Wei, L.I.U.; Jiansheng, W.U. 2008: Mechanical properties and fracture mechanism study of sintered Nd-Fe-B alloy. Journal of Alloys and Compounds 458(1-2): 292-296

Varin, R.A.; Ruutopold, A. 1991: Mechanical properties and fracture of an amorphous metallic ribbon/thermoplastic matrix composite with low volume fraction of reinforcement. Polymer Composites 12(6): 411-416

Chang, S.Y.; Tezuka, H.; Kamio, A. 1997: Mechanical properties and fracture process of SiCw/Mg composites produced by squeeze casting and extrusion. Materials Transactions - Jim 38(1): 18-27

Bhagawan, S.S.; De, S.K. 1988: Mechanical properties and fracture surface morphology of clay-filled thermoplastic 1,2-polybutadiene rubber at elevated temperatures. Polymer-Plastics Technology and Engineering (Softcover Ed) 27(1): 37-60

Crespo, J.E.; Sanchez, L.; Balart, R.; Lopez, J. 2009: Mechanical Properties and Fracture Surface Morphology of Dehp and Dinch Based Vinyl Plastisols. Journal of Elastomers and Plastics 41(2): 145-161

Xuening, H.U.A.N.G.; Nicholson, P.S. 1993: Mechanical properties and fracture toughness of α-Al2O3-platelet-reinforced Y-PSZ composites at room and high temperatures. Journal of the American Ceramic Society 76(5): 1294-12301

Jianning, D.I.N.G.; Yonggang, M.E.N.G.; Shizhu, W.E.N. 2000: Mechanical properties and fracture toughness of multilayer hard coatings using nanoindentation. Thin Solid Films 371(1-2): 178-182

Vella, J.B.; Adhihetty, I.S.; Junker, K.; Volinsky, A.A. 2003: Mechanical properties and fracture toughness of organo-silicate glass (OSG) low-k dielectric thin films for microelectronic applications. International Journal of Fracture 119-120(4/1-2): 487-499

Redjel, B. 1995: Mechanical properties and fracture toughness of phenolic resin. Plastics Rubber and Composites Processing and Applications 24(4): 221-228

Bocca, P.; Grazzini, A. 2013: Mechanical Properties and Freeze-Thaw Durability of Strengthening Mortars. Journal of Materials in Civil Engineering 25(2): 274-280

Malhotra, V.M. 1989: Mechanical properties and freezing and thawing durability of concrete incorporating a ground granulated blast-furnace slag - Propriétés mécaniques et durabilité au gel et dégel de béton incluant un laitier broyé-granulé de haut fourneau. Canadian Journal of Civil Engineering 16(2): 140-156

Zhang, M.H.; Mirza, J.; Malhotra, V.M. 1999: Mechanical properties and freezing and thawing durability of polypropylene fiber-reinforced shotcrete incorporating silica fume and high volumes of fly ash. Cement, Concrete and Aggregates 21(2): 117-125

Mohan Malhotra, V.; Painter, K.A.; Bilodeau, A. 1987: Mechanical properties and freezing and thawing resistance of high-strength concrete incorporating silica fume - Propriétés mécaniques et résistance au gel/dégel de béton à haute résistance avec fumée de silice. Cement, Concrete and Aggregates 9(2): 65-79

Daoji, G.A.N.; Shiqiang, L.U.; Caisheng, S.O.N.G.; Zhijian, W.A.N.G. 2001: Mechanical properties and frictional behavior of a mica-filled poly(aryl ether ketone) composite. European Polymer Journal 37(7): 1359-1365

Escandar, A.; Moroni, M.O.; Sarrazin, M.; Roschke, P.N. 2007: Mechanical properties and fuzzy modeling of high-damping rubber with thermal effects. Journal of Materials in Civil Engineering 19(5): 428-436

Ichida, Y. 2008: Mechanical properties and grinding performance of ultrafine-crystalline cBN abrasive grains. European Conference on Diamond, Diamond-Like Materials, Carbon Nanotubes, Nitrides and Silicon Carbide 17(7-10): 1791-1795

Edahiro, T.; Kouzai, K.; Yasuda, H.Y. 2013: Mechanical properties and hardening mechanism of Fe―Al―Ni single crystals containing NiAl precipitates. Acta Materialia 61(5): 1716-1725

Yoshikawa, N.; Watanabe, Y.; Sugawara, S.; Taniguchi, S.; Kikuchi, A. 1998: Mechanical properties and hardness gradation of Al/Al2O3 composite bodies obtained by reaction between SiO2 and molten Al. Nippon Kinzoku Gakkaishi (1952) 62(11): 1006-1012

Yingchun, D.I.N.G. 2012: Mechanical properties and hardness of new carbon-rich superhard C11N4 from first-principles investigations. Physica. B, Condensed Matter 407(12): 2282-2288

Yamane, H.; Terao, K.; Hiki, S.; Kimura, Y. 2001: Mechanical properties and higher order structure of bacterial homo poly(3-hydroxybutyrate) melt spun fibers. Polymer (Guildford) 42(7): 3241-3248

Aoyagi, Y.; Doi, Y.; Iwata, T. 2003: Mechanical properties and highly ordered structure of ultra-high-molecular-weight poly[(R)-3-hydroxybutyrate] films: Effects of annealing and two-step drawing. Polymer Degradation and Stability 79(2): 209-216

Cui, W.F.; Zhang, S.X.; Jiang, Y.; Dong, J.; Liu, C.M. 2011: Mechanical properties and hot-rolled microstructures of a low carbon bainitic steel with Cu―P alloying. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 528(21): 6401-6406

Tanaka, K.; Oshima, T.; Saito, T. 1998: Mechanical properties and hot-workability of TiB2-reinforced high modulus steel. Tetsu-To-Hagane 84(10): 747-754

Berseneva, F.N.; Zhmurko, G.P.; Neuymina, S.V.; Timofeyev, N.I. 1991: Mechanical properties and hydrogen permeability of palladium-platinum alloys modified by niobium and tantalum. Physics of Metals and Metallography 72(5): 141-145

Furukawa, M.; Shiiba, T.; Murata, S. 1999: Mechanical properties and hydrolytic stability of polyesterurethane elastomers with alkyl side groups. Polymer (Guildford) 40(7): 1791-1798

Staudinger, U.; Weidisch, R.; Zhu, Y.; Gido, S.P.; Uhrig, D.; Mays, J.W.; Iatrou, H.; Hadjichristidis, N. 2006: Mechanical properties and hysteresis behaviour of multigraft copolymers. Macromol. Symp: 42-50

Berthier da Cunha, T.; Wu, J.P.; Peitl, O.; Fokin, V.M.; Zanotto, E.D.; Iannucci, L.; Boccaccini, A.R. 2007: Mechanical properties and impact resistance of a new transparent glass-ceramic. Advanced Engineering Materials 9(3): 191-196

Chang, Y.Y.; Wu, C.J. 2013: Mechanical properties and impact resistance of multilayered TiAlN/ZrN coatings. Surf. Coat. Technol 231: 62-66

Fang, J.I.A.; Hongwei, S.H.A.; Fancheng, Z.H.A.N.G. 2014: Mechanical properties and impact response of disc-spring vibration isolator combined with polyurethane pieces. International Journal of Intelligent Systems Technologies and Applications 13(1-2): 117-137

Tjong, S.C.; Li, R.K.Y. 1997: Mechanical properties and impact toughness of talc-filled β-crystalline phase polypropylene composites. Journal of Vinyl and Additive Technology 3(1): 89-95

Kishi, H.; Naitou, T.; Matsuda, S.; Murakami, A.; Muraji, Y.; Nakagawa, Y. 2007: Mechanical properties and inhomogeneous nanostructures of dicyandiamide-cured epoxy resins. J. Polym. Sci., Part B, Polym. Phys 45(12): 1425-1434

Chan, K.S.; Ji, H.; Wang, X.; Hudak, S.J.; Lanning, B.R. 2006: Mechanical properties and interface toughness of FeCo thin films on Ti-6Al-4V. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 422(1-2): 298-308

Haipeng, L.I.; Jianli, K.A.N.G.; Chunnian, H.E.; Naiqin, Z.H.A.O.; Chunyong, L.I.A.N.G.; Baoe, L.I. 2013: Mechanical properties and interfacial analysis of aluminum matrix composites reinforced by carbon nanotubes with diverse structures. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 577: 120-124

Jingxin, L.E.I.; Rong, Z.H.O.U. 2000: Mechanical properties and interfacial interaction of CaCO3 filled HDPE compatibilized with HDPE functionalized by ultraviolet irradiation. Polymer Engineering and Science 40(7): 1529-1533

Ye, F.; Lei, T.C.; Zhao, Y.C.; Zhou, Y.; Dai, J.Y. 1995: Mechanical properties and interfacial microstructure of SiC whisker-reinforced ZrO2-Y2O3 composites. Ceramics International 21(4): 243-247

Chen, S.W.; Lee, S.W.; Yip, M.C. 2003: Mechanical properties and intermetallic compound formation at the Sn/Ni and Sn-0.7wt.%Cu/Ni joints. J. Electron. Mater 32(11): 1284-1289

Yamada, K.; Mutsutake, T.; Takayanagi, M.; Kajiyama, T. 1989: Mechanical properties and intermolecular interactions in molecular composites composed of wholly aromatic polyamide and poly-(amide-imide). Journal of Macromolecular Science. Chemistry 26(6): 891-902

Ogawa, S.; Fukai, T.; Futatsugi, T.; Takemoto, M. 1995: Mechanical properties and internal stress in the vapor deposited Ti(C, N) film estimated by the quantitative analysis of AE waves emitted during the loading. Hyomen Gijutsu 46(5): 456-463

Krajnikov, A.V.; Demidik, A.N.; Ortner, H.M. 1997: Mechanical properties and interphase boundary composition of ferritic steels strengthened by yttrium and titanium disperse oxides. Icsma 11: International Conference on the Strength of Materials 234-236: 357-360

Kusy, R.P.; Whitley, J.Q.; Kalachandra, S. 2001: Mechanical properties and interrelationships of poly(methyl methacrylate) following hydration over saturated salts. Polymer (Guildford) 42(6): 2585-2595

Iqbal, M.; Akhter, J.I.; Hu, Z.Q.; Zhang, H.F.; Quayyum, A.; Sun, W.S. 2007: Mechanical properties and ion irradiation of bulk amorphous Zr55Cu30Al10Ni5 alloy. Journal of Non-Crystalline Solids 353(24-25): 2452-2458

Xinping, H.O.U.; Kok Siong, S.I.O.W. 2000: Mechanical properties and ionic conductivities of plasticized polymer electrolytes based on ABS/PMMA blends. Polymer (Guildford) 41(24): 8689-8696

Roddecha, S.; Zexeuan, D.O.N.G.; Yiquan, W.U.; Anthamatten, M. 2012: Mechanical properties and ionic conductivity of electrospun quaternary ammonium ionomers. Journal of Membrane Science 389: 478-485

Seong Hun, K.I.M.; Jong Kuk, C.H.O.I.; Young Chan, B.A.E. 2001: Mechanical properties and ionic conductivity of Gel polymer electrolyte based on poly(vinylidene-fluoride-cohexafluoropropylene). Journal of Applied Polymer Science 81(4): 948-956

Onori, R.; Polettini, A.; Pomi, R. 2011: Mechanical properties and leaching modeling of activated incinerator bottom ash in Portland cement blends. 2009 Wascon Conference 31(2): 298-310

Pecanac, G.; Baumann, S.; Malzbender, J. 2011: Mechanical properties and lifetime predictions for Ba0.5Sr0.5Co0.8Fe0.2O3-δ membrane material. Journal of Membrane Science 385-386: 263-268

Bistricic, L.; Leskovac, M.; Baranovic, G.; Lucic Blagojevic, S. 2008: Mechanical Properties and Linear Infrared Dichroism of Thin Films of Polyurethane Nanocomposites. Journal of Applied Polymer Science 108(2): 791-803

Sugie, Y.; Iwata, S.; Fukaura, K. 1996: Mechanical properties and localized corrosion behavior of powder metallaurgical whisker rainforced aluminium metal matrix composites. Zairyo 45(11): 1198-1204

Savaskan, T.; Murphy, S. 1987: Mechanical properties and lubricated wear of Zn-25Al-based alloys. Wear 116(2): 211-224

Mizutani, H.; Notoya, H.; Yamada, S.; Takayanagi, A.; Okamura, K. 1994: Mechanical properties and machinability of various aluminum alloys. Keikinzoku 44(1): 16-21

Chen, H.S.; Sherwood, R.C.; Jin, S.; Chi, G.C.; Inoue, A.; Masumoto, T.; Hagiwara, H. 1984: Mechanical properties and magnetic behavior of deformed metal glass wires - Propriétés mécaniques et comportement magnétique de fils de verres métalliques déformés. Journal of Applied Physics 55(6): 1796-1798

Gunderov, D.; Lukyanov, A.; Prokofiev, E.; Kilmametov, A.; Pushin, V.; Valiev, R. 2009: Mechanical properties and martensitic transformations in nanocrystalline Ti49.4Ni50.6 alloy produced by high-pressure torsion. International Symposium on Bulk Nanostructured Materials: from Fundamentals to Innovation, Bnm 2007 503(1-2): 75-77

Svistkov, A.L. 2001: Mechanical properties and mass transfer of viscoelastic deformable media. International Journal of Engineering Science 39(13): 1509-1532

Kimpara, I.; Ohsawa, I.; Kageyama, K.; Suzuki, T.; Fukiage, N.; Nakada, M. 1995: Mechanical properties and material design of glass/aramid/carbon hybrid FRP laminates : fatigue properties. Zairyo 44(499): 412-417

Nakada, M.; Kimpara, I.; Kageyama, K.; Suzuki, T.; Ohsawa, I. 1993: Mechanical properties and material design of glass/aramid/carbon hybrid FRP laminates: static properties. Zairyo 42(474): 277-282

Irwan, R.; Huang, H.; Zheng, H.Y.; Wu, H. 2013: Mechanical properties and material removal characteristics of soft-brittle HgCdTe single crystals. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 559: 480-485

Reynaud, C.; Thevenot, F.; Chartier, T.; Besson, J.L. 2005: Mechanical properties and mechanical behaviour of SiC dense-porous laminates. Journal of the European Ceramic Society 25(5): 589-597

Shibo, L.I.; Jianxin, X.I.E.; Junqing, Z.H.A.O.; Litong, Z.H.A.N.G. 2002: Mechanical properties and mechanism of damage tolerance for Ti3SiC2. Materials Letters (General Ed.) 57(1): 119-123

Scola, D.A.; Vontell, J.H. 1991: Mechanical properties and mechanism of the degradation process of 316°C isothermally aged graphite fiber/PMR-15 composites. Polymer Engineering and Science 31(1): 6-13

Suzuki, T.; Umehara, H.; Hayashi, R.; Watanabe, S. 1993: Mechanical properties and metallography of aluminum matrix composites reinforced by the Cu- or Ni-plating carbon multifilament. Journal of Materials Research 8(10): 2492-2498

Smirnova, V.Y.; Bessonov, M.I.; Sklizkova, V.P.; Nekrasova, Y.M. 1991: Mechanical properties and methods of production of high-modulus films based on polyimide blends. Polymer Science 33(11): 2303-2309

Fiedler, T.; Veyhl, C.; Belova, I.V.; Bernthaler, T.; Heine, B.; Murch, G.E. 2013: Mechanical properties and micro-deformation of sintered metallic hollow sphere structure. Computational Materials Science 74: 143-147

Nakai, A.; Ohki, T.; Takeda, N.; Hamada, H. 2001: Mechanical properties and micro-fracture behaviors of flat braided composites with a circular hole. Design and Manufacturing of Composite Structures Symposium 52(3-4): 315-322

Sakai, E.; Sugiyama, T.; Saito, T.; Daimon, M. 2010: Mechanical properties and micro-structures of calcium aluminate based ultra high strength cement. Cement and Concrete Research 40(6): 966-970

Araki, Y.; Shimizu, D.; Hori, Y.; Nakatani, K.; Saito, H. 2013: Mechanical properties and microphase structure of hydrogenated S-SB-S triblock copolymers. Polymer Journal 45(11): 1140-1145

Qizhen, L.I. 2012: Mechanical properties and microscopic deformation mechanism of polycrystalline magnesium under high-strain-rate compressive loadings. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 540: 130-134

Fujii, K. 1995: Mechanical properties and microscopic interactions in swelling clay-water systems. Japanese Society of Irrigation, Drainage and Reclamation Engineering Jsidre Awards. Meeting (28): 54-56

Morita, H.; Sakabe, H.; Itoh, T.; Konishi, T. 1993: Mechanical properties and microsctructure of drawn high-density polyethylene films by unilateral roller drawing method. Sen'i Gakkaishi 49(9): 457-465

Hockauf, M.; Meyer, L.W.; Halle, T.; Kuprin, C.; Hietschold, M.; Schulze, S.; Kruger, L. 2006: Mechanical properties and microstructural changes of ultrafine-grained AA6063T6 during high-cycle fatigue. International Journal of Materials Research 97(10): 1392-1400

Chung, H.M.; Park, J.H.; Strain, R.V.; Leong, K.H.; Smith, D.L. 1998: Mechanical properties and microstructural characteristics of laser and electron-beam welds in V-4Cr-4Ti. J. Nucl. Mater 258263: 1451-1457

Venkatraman, R.; Bravman, J.C.; Nix, W.D.; Davies, P.W.; Flinn, P.A.; Fraser, D.B. 1990: Mechanical properties and microstructural characterization of Al-0.5 %Cu thin films. J. Electron. Mater 19(11): 1231-1237

Revel, P.; Clavel, M.; Beranger, G.; Pilvin, P. 1993: Mechanical properties and microstructural evolution of a cobalt base alloy coating. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 169(1-2): 85-92

Li, C.H.E.N.; Yong, D.U.; Wang, S.Q.; Wang, A.J.; Xu, H.H. 2009: Mechanical properties and microstructural evolution of TiN coatings alloyed with Al and Si. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 502(1-2): 139-143

Yano, Y.; Yamashita, S.; Ohtsuka, S.; Kaito, T.; Akasaka, N.; Shibayama, T.; Watanabe, S.; Takahashi, H. 2010: Mechanical properties and microstructural stability of 11 Cr-ferritic/martensitic steel cladding under irradiation. J. Nucl. Mater 398(1-3): 59-63

Eldanaf, E.A. 2008: Mechanical properties and microstructure evolution of 1050 aluminum severely deformed by ECAP to 16 passes. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 487(1-2): 189-200

Park, S.Y.; Kim, M.C.; Park, C.G. 2007: Mechanical properties and microstructure evolution of the nano WC-Co coatings fabricated by detonation gun spraying with post heat treatment. Rq 12 : International Conference on Rapidly Quenched and Metastable Materials 449-451: 894-897

Chao, W.U.; Zhi, W.A.N.G.; Qinggang, L.I.; Guopu, S.H.I.; Meijia, L.I.U.; Yuanyuan, L.I. 2014: Mechanical properties and microstructure evolution of Ti/Al2O3 cermet composite with CeO2 addition. Journal of Alloys and Compounds 617: 729-733

Vahid Yousefi, M.E.H.R.; Mohammad Reza, T.O.R.O.G.H.I.N.E.J.A.D.; Rezaeian, A. 2014: Mechanical properties and microstructure evolutions of multilayered Al-Cu composites produced by accumulative roll bonding process and subsequent annealing. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 601: 40-47

Bamba, N.; Choa, Y.H.; Sekino, T.; Niihara, K. 2003: Mechanical properties and microstructure for 3 mol% yttria doped zirconia/silicon carbide nanocomposites. Journal of the European Ceramic Society 23(5): 773-780

Dai, Y.; Maloy, S.A.; Bauer, G.S.; Sommer, W.F. 2000: Mechanical properties and microstructure in low-activation martensitic steels F82H and optimax after 800-MeV proton irradiation. J. Nucl. Mater 283-87: 513-517

Yongming, L.; Pan, W.E.I.; Li, S.H.U.Q.I.N.; Chen, J.I.A.N.; Wang, R.U.I.G.A.N.G.; Li, J.I.A.N.Q.I.A.N.G. 2002: Mechanical properties and microstructure of a Si3N4/Ti3SiC2 multilayer composite. Ceramics International 28(2): 223-226

Shamardin, V.K.; Golovanov, V.N.; Bulanova, T.M.; Povstianko, A.V.; Fedoseev, A.E.; Goncharenko, Y.D.; Ostrovsky, Z.E. 1999: Mechanical properties and microstructure of advanced ferritic-martensitic steels used under high dose neutron irradiation. J. Nucl. Mater 271-72: 155-161

Ehrstrom, J.C.; Pineau, A. 1994: Mechanical properties and microstructure of Al-Fe-X alloys. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 186(1-2): 55-64

Kirkbride, R.; Webster, D. 1986: Mechanical properties and microstructure of Al-Li-Cu-Mg-Zr die forgings - Propriétés mécaniques et microstructure des alliages forgés Al-Li-Cu-Mg-Zr - Mechanische Eigenschaften und Gefuege von Gesenkschmiedestuecken aus Al-Li-Cu-Mg-Zr. Metallurgical Transactions. A, Physical Metallurgy and Materials Science 17(11): 2007-2016

Liuyi, X.I.A.N.G.; Fen, W.A.N.G.; Jianfeng, Z.H.U.; Xiaofeng, W.A.N.G. 2011: Mechanical properties and microstructure of Al2O3/TiAl in situ composites doped with Cr2O3. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 528(9): 3347-3351

Dai, Y.; Hamaguchi, D. 2005: Mechanical properties and microstructure of AlMg3 irradiated in SINQ Target-3. J. Nucl. Mater 343(1-3): 184-190

Izumi, K.; Yasuda, K.; Kinoshita, C.; Kutsuwada, M. 1998: Mechanical properties and microstructure of α-alumina and magnesium aluminate spinel irradiated with He ions. J. Nucl. Mater 258263: 1856-1860

Tian, J.M.; Zhang, Y.L.; Zhang, S.X.; Luo, X.P. 1999: Mechanical properties and microstructure of alumina-glass composites. Journal of the American Ceramic Society 82(6): 1592-1594

Jingtao, W.A.N.G.; Furukawa, M.; Horita, Z.; Nemoto, M.; Yan, M.A.; Langdon, T.G. 1994: Mechanical properties and microstructure of 6061 aluminum alloy matrix composite reinforced with alumina microspheres. Keikinzoku 44(5): 286-291

Kun, Y.U.; Wenxian, L.I.; Songrui, L.I.; Jun, Z.H.A.O. 2004: Mechanical properties and microstructure of aluminum alloy 2618 with Al3(Sc, Zr) phases. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 368(1-2): 88-93

Smirnov, B.I.; Nikolaev, V.I.; Orlova, T.S.; Shpeizman, V.V.; De Arellanolopez, A.R.; Goretta, K.C.; Singh, D.; Routbort, J.L. 1998: Mechanical properties and microstructure of an Al2O3-SiC-TiC composite. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 242(1-2): 292-295

Bin, J.I.A.N.G.; Wenjun, L.I.U.; Siqiang, C.H.E.N.; Qingshan, Y.A.N.G.; Fusheng, P.A.N. 2011: Mechanical properties and microstructure of as-extruded AZ31 Mg alloy at high temperatures. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 530: 51-56

Gzyl, M.; Rosochowski, A.; Pesci, R.; Olejnik, L.; Yakushina, E.; Wood, P. 2014: Mechanical Properties and Microstructure of AZ31B Magnesium Alloy Processed by I-ECAP. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science 45(3): 1609-1620

Singh, M.; Salem, J.A. 2002: Mechanical properties and microstructure of biomorphic silicon carbide ceramics fabricated from wood precursors. J. Eur. Ceram. Soc 22(14-15): 2709-2717

Klaar, H.J.; Raffeis, I. 1991: Mechanical properties and microstructure of boron-alloyed steel 19 MnB 4. Steel Research 62(11): 518-521

Tien, I.H.O.U.; Kriven, W.M. 1994: Mechanical properties and microstructure of Ca2SiO4-CaZrO3 composites. Journal of the American Ceramic Society 77(1): 65-72

Ermel, R.; Beck, T.; Vohringer, O. 2004: Mechanical properties and microstructure of carbon fibre reinforced carbon materials produced by chemical vapour infiltration. Icsma 13 International Conference on the Strength of Materials 387-389: 845-851

Redsten, A.M.; Klier, E.M.; Brown, A.M.; Dunand, D.C. 1995: Mechanical properties and microstructure of cast oxide-dispersion-strengthened aluminum. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 201(1-2): 88-102

Low, N.M.P.; Beaudoin, J.J. 1993: Mechanical properties and microstructure of cement binders reinforced with synthesized xonotlite micro-fibres. Cement and Concrete Research 23(5): 1016-1028

Koike, J.; Tashima, S.; Wakiya, S.; Maruyama, K.; Oikawa, H. 1996: Mechanical properties and microstructure of centrifugally compacted alumina and hot-isostatically-pressed alumina. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 220(1-2): 26-34

Maschio, S.; Sbaizero, O.; Meriani, S. 1995: Mechanical properties and microstructure of CeO2-stabilized ZrO2/Al2O3 composites. Interceram 44(2): 76-78

Ekimov, E.A.; Gierlotka, S.; Gromnitskaya, E.L.; Kozubowski, J.A.; Palosz, B.; Lojkowski, W.; Naletov, A.M. 2002: Mechanical properties and microstructure of diamond-SiC nanocomposites. Inorganic Materials 38(11): 1117-1122

Abbas Zadpoor, A.; Sinke, J.; Benedictus, R.; Pieters, R. 2008: Mechanical properties and microstructure of friction stir welded tailor-made blanks. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 494(1-2): 281-290

Munitz, A.; Cotler, C.; Stern, A.; Kohn, G. 2001: Mechanical properties and microstructure of gas tungsten arc welded magnesium AZ91D plates. Imec-9 Israel Materials Engineering Conference 302(1): 68-73

Jinhai, Y.A.N.G.; Yong, Z.H.A.N.G.; Yinxi, Z.H.A.N.G. 2002: Mechanical properties and microstructure of HDPE/Al(OH)3/Silicone oil composite. Journal of Applied Polymer Science 83(9): 1896-1903

Kesternich, W.; Ullmaier, H. 2003: Mechanical properties and microstructure of helium-implanted beryllium. Journal of Nuclear Materials 312(2-3): 212-223

Low, N.M.P.; Beaudoin, J.J. 1994: Mechanical properties and microstructure of high alumina cement-based binders reinforced with natural wollastonite micro-fibres. Cement and Concrete Research 24(4): 650-660

Noumowe, A. 2005: Mechanical properties and microstructure of high strength concrete containing polypropylene fibres exposed to temperatures up to 200 °C. Cement and Concrete Research 35(11): 2192-2198

Hornberger, H.; Marquis, P.M. 1995: Mechanical properties and microstructure of in-Ceram, a ceramic-glass composite for dental crowns. German Society of Glass Technology. Annual Meeting 68(6): 188-194

Cuiwei, L.I.; Yong, H.U.A.N.G.; Wang, C.A.; Ke, T.A.N.G.; Shuqin, L.I.; Qingfeng, Z.A.N. 2002: Mechanical properties and microstructure of laminated Si3N4+SiCw/BN+Al2O3 ceramics densified by spark plasma sintering. Materials Letters (General Ed.) 57(2): 336-342

De Hosson, J.T.M.; Noordhuis, J. 1993: Mechanical properties and microstructure of laser treated Al-Cu-Mg alloys. J. Phys., Iv 3(7): 927-932

Ullmaier, H. 1987: Mechanical properties and microstructure of metals under light ion irradiation - Propriétés mécaniques et microstructure des métaux sous irradiation ionique en lumière visible. The relation between Mechanical Properties and Microstructure under Fusion Irradiation Conditions. Workshop (1985) 101(1-4): 147-162

Dai, Y.; Gavillet, D.; Paschoud, F.; Victoria, M. 1994: Mechanical properties and microstructure of 600 MeV proton irradiated copper single crystals. J. Nucl. Mater 212-15(A): 393-398

Travitzky, N.A. 1998: Mechanical properties and microstructure of mullite whisker-reinforced magnesium aluminosilicate glass with cordierite composition. Journal of Materials Science Letters 17(19): 1609-1611

Gao, L.; Wang, H.Z.; Hong, J.S.; Miyamoto, H.; Miyamoto, K.; Nishikawa, Y.; Torre, S.D.D.L. 1999: Mechanical properties and microstructure of nano-SiC-Al2O3 composites densified by spark plasma sintering. Journal of the European Ceramic Society 19(5): 609-613

Dai, P.Q.; Xu, W.C.; Huang, Q.Y. 2008: Mechanical properties and microstructure of nanocrystalline nickel-carbon nanotube composites produced by electrodeposition. Meeting of the International Conference on the Strength of Materials 483-484: 172-174

Munitz, A.; Shtechman, A.; Cotler, C.; Talianker, M.; Dahan, S. 1998: Mechanical properties and microstructure of neutron irradiated cold worked Al-6063 alloy. Journal of Nuclear Materials 252(1-2): 79-88

Sanschagrin, A.; Tremblay, R.; Angers, R.; Dube, D. 1996: Mechanical properties and microstructure of new magnesium-lithium base alloys. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 220(1-2): 69-77

Craig, C.H.; Friend, C.M.; Edwards, M.R.; Cornish, L.A.; Gokcen, N.A. 2003: Mechanical properties and microstructure of platinum enhanced radiopaque stainless steel (PERSS) alloys. Journal of Alloys and Compounds 361: 187-199

Suzuki, A.; Mochizuki, N. 2003: Mechanical properties and microstructure of poly(ethylene terephthalate) microfiber prepared by carbon dioxide laser heating. Journal of Applied Polymer Science 90(7): 1955-1958

Sakamoto, K.; Yamamoto, K. 2002: Mechanical properties and microstructure of semi-solid injection molded Mg-Al-Ca alloys. Keikinzoku 52(10): 437-441

Martin, J.W.; Fredrich, J.T.; Felice, C.W.; Green, S.J. 1993: Mechanical properties and microstructure of shock-conditioned tuff. Int. J. Rock Mech. Min. Sci. Geomech. Abstr 30(7): 669-675

Guanjun, Q.I.A.O.; Rong, M.A.; Ning, C.A.I.; Chunguang, Z.H.A.N.G.; Zhihao, J.I.N. 2002: Mechanical properties and microstructure of Si/SiC materials derived from native wood. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 323(1-2): 301-305

Cao, G.; Konishi, H.; Li, X. 2008: Mechanical properties and microstructure of SiC-reinforced Mg-(2,4)Al-lSi nanocomposites fabricated by ultrasonic cavitation based solidification processing. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 486(1-2): 357-362

Jinhai, Y.A.N.G.; Yong, Z.H.A.N.G.; Yinxi, Z.H.A.N.G. 2002: Mechanical properties and microstructure of the HDPE/Al(OH)3/POE composite. Polymers and Polymer Composites 10(5): 375-380

Chul Kyu, J.I.N.; Bolouri, A.; Chung Gil, K.A.N.G. 2014: Mechanical Properties and Microstructure of Thin Plates of A6061 Wrought Aluminum Alloy Using Rheology Forging Process with Electromagnetic Stirring. Metallurgical and Materials Transactions. B, Process Metallurgy and Materials Processing Science 45(3): 1068-1080

Dvoriashin, A.M.; Porollo, S.I.; Konobeev, Y.V.; Budylkin, N.I.; Mironova, E.G.; Ioltukhovskiy, A.G.; Leontyevasmirnova, M.V.; Garner, F.A. 2007: Mechanical properties and microstructure of three Russian ferritic/martensitic steels irradiated in BN-350 reactor to 50 dpa at 490 °C. J. Nucl. Mater 367-370: 92-96

Meng, W.J.; Tittsworth, R.C.; Rehn, L.E. 2000: Mechanical properties and microstructure of TiC/amorphous hydrocarbon nanocomposite coatings. International Conference on Metallurgical Coatings and Thin Films 377-378: 222-232

Shimokawa, H.; Soga, T.; Serizawa, K. 2002: Mechanical properties and microstructure of tin-silver-bismuth lead-free solder : Lead-free electronics packaging. Materials Transactions - Jim 43(8): 1808-1815

Songlin, R.A.N.; Lian, G.A.O. 2007: Mechanical properties and microstructure of TiN/TZP nanocomposites. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 447(1-2): 83-86

Yongdong, X.U.; Litong, Z.H.A.N.G. 1995: Mechanical properties and microstructure of tortoise shell. Composites 26(4): 315-318

Karnezis, P.A.; Durrant, G.; Cantor, B.; Palmiere, E.J. 1995: Mechanical properties and microstructure of twin roll cast Al-7Si/SiCp MMCs. International Conference on Materials for Microelectronics 11(8): 741-751

Kim, W.J.; Lee, K.E.; Choi, S.H. 2009: Mechanical properties and microstructure of ultra fine-grained copper prepared by a high-speed-ratio differential speed rolling. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 506(1-2): 71-79

Saeidi, S.; Voisey, K.T.; Mccartney, D.G. 2011: Mechanical Properties and Microstructure of VPS and HVOF CoNiCrAlY Coatings. Journal of Thermal Spray Technology 20(6): 1231-1243

Santana, Y.Y.; La Barberasosa, J.G.; Caro, J.; Puchicabrera, E.S.; Staia, M.H. 2008: Mechanical properties and microstructure of WC-10Co-4Cr and WC-12Co thermal spray coatings deposited by HVOF : Characterisation for process optimisation in surface engineering. Surface Engineering 24(5): 374-382

Chaim, R.; Baum, L.; Brandon, D.G. 1989: Mechanical properties and microstructure of whisker-reinforced alumina-30 vol% glass matrix composite. Journal of the American Ceramic Society 72(9): 1636-1642

Jing, S.U.N.; Chuanzhen, H.U.A.N.G.; Jun, W.A.N.G.; Hanlian, L.I.U. 2006: Mechanical properties and microstructure of ZrO2-TiN-Al2O3 composite ceramics. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 416(1-2): 104-108

Okubo, N.; Wakai, E.; Tomita, T.; Jitsukawa, S. 2007: Mechanical properties and microstructures in F82H steel irradiated under alternating temperature. J. Nucl. Mater 367-370: 112-116

Kuroda, D.; Hanawa, T.; Hibaru, T.; Kuroda, S.; Kobayashi, M. 2003: Mechanical properties and microstructures of a thin plate of nickel-free stainless steel with nitrogen absorption treatment. Materials Transactions - Jim 44(7): 1363-1369

Cuberosesin, J.M.; Horita, Z. 2012: Mechanical Properties and Microstructures of Al-Fe Alloys Processed by High-Pressure Torsion. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science 43(13): 5182-5192

Mendis, C.L.; Jhawar, H.P.; Sasaki, T.T.; Ohishi, K.; Sivaprasad, K.; Fleury, E.; Hono, K. 2012: Mechanical properties and microstructures of Al―1Fe―(0-1)Zr bulk nano-crystalline alloy processed by mechanical alloying and spark plasma sintering. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 541: 152-158

Hongzhi, W.A.N.G.; Lian, G.A.O.; Zhijian, S.H.E.N.; Nygren, M. 2001: Mechanical properties and microstructures of Al2O3-5 vol.% YAG composites. Journal of the European Ceramic Society 21(6): 779-783

Griffin, A.J.; Brotzen, F.R.; Dunn, C.F. 1987: Mechanical properties and microstructures of Al-1%Si thin film metallizations - Propriétés mécaniques et microstructures des métallisations de couches minces Al-1%Si. Thin Solid Films 150(2-3): 237-244

Ni, H.; Elmadagli, M.; Alpas, A.T. 2004: Mechanical properties and microstructures of 1100 aluminum subjected to dry machining. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 385(1-2): 267-278

Kim, H.K.; Chung, C.S.; Cha, B.S.; Goo, B.H.; Hyun, C.Y. 2004: Mechanical properties and microstructures of an AZ31 Mg alloy through severe plastic deformation - Mechanische Eigenschaften und Gefüge einer AZ31-Mg-Legierung nach starker plastischer Verformung. Praktische Metallographie 41(3): 142-155

Li, Y.; Huang, Q.; Wu, Y.; Nagasaka, T.; Muroga, T. 2007: Mechanical properties and microstructures of China low activation martensitic steel compared with JLF-1. J. Nucl. Mater 367-370: 117-121

Parka, H.K.; Lee, S.J.; Kim, Y.J.; Jang, C.I.; Won, J.P. 2007: Mechanical properties and microstructures of GFRP rebar after long-term exposure to chemical environments. Polymers and Polymer Composites 15(5): 403-408

Sakai, K.; Satou, M.; Fujiwara, M.; Takanashi, K.; Hasegawa, A.; Abe, K. 2004: Mechanical properties and microstructures of high-chromium V-Cr-Ti type alloys. J. Nucl. Mater 329-33: 457-461

Zuotai, Z.H.A.N.G.; Lidong, T.E.N.G.; Wenchao, L.I. 2007: Mechanical properties and microstructures of hot-pressed MgAlON-BN composites. Journal of the European Ceramic Society 27(1): 319-326

Mortensen, K.S.; Jensen, C.G.; Conrad, L.C.; Losee, F. 2001: Mechanical properties and microstructures of inertia-friction-welded 416 stainless steel : A stainless steel normally considered nonweldable by fusion methods can be joined using friction welding. Welding Journal 80(11): 268.s-273.s

Chou, T.C.; Nieh, T.G.; Tsui, T.Y.; Pharr, G.M.; Oliver, W.C. 1992: Mechanical properties and microstructures of metal/ceramic microlaminates. I: Nb/MoSi2 systems. Journal of Materials Research 7(10): 2765-2773

Chou, T.C.; Nieh, T.G.; Mcadams, S.D.; Pharr, G.M.; Oliver, W.C. 1992: Mechanical properties and microstructures of metal/ceramic microlaminates. II: A Mo/Al2O3 system. Journal of Materials Research 7(10): 2774-2784

Das, K.; Banerjee, G. 2000: Mechanical properties and microstructures of reaction sintered mullite-zirconia composites in the presence of an additive : dysprosia. Journal of the European Ceramic Society 20(2): 153-157

Yang, Y.; Stucker, B.E.; Janaki Ram, G.D. 2010: Mechanical Properties and Microstructures of SiC Fiber-reinforced Metal Matrix Composites Made Using Ultrasonic Consolidation. Journal of Composite Materials 44(26): 3179-3194

Ehira, M.; Egami, A. 1995: Mechanical properties and microstructures of submicron cermets. International Journal of Refractory Metals and Hard Materials 13(5): 313-319

Akbarzadeh, H.A.; Tamizifar, M.; Mirdamadi, S.; Abdolhosseini, A. 2005: Mechanical properties and microstructures of Zr-microalloyed cast steel. Isij International 45(8): 1201-1204

An, L.; He, D.; Jing, J.; Ma, R.; Jiang, Z.; Kou, X. 1996: Mechanical properties and miscibility of polyethersulfone/phenoxy blends. Journal of Applied Polymer Science 59(12): 1843-1847

Mollica, F.; Ventre, M.; Sarracino, F.; Ambrosio, L.; Nicolais, L. 2006: Mechanical properties and modelling of a hydrophilic composite used as a biomaterial. Composites Science and Technology 66(1): 92-101

Kochi, M.; Mita, I.; Yokota, R. 1984: Mechanical properties and molecular aggregation of soluble aromatic polyimide. Polymer Engineering and Science 24(13): 1021-1025

Krisyuk, B.E.; Popov, A.A.; Zaikov, G.E.; De Candia, F.; Vittoria, V.; Russo, R. 1987: Mechanical properties and molecular mobility in oriented polyolefines. Colloid and Polymer Science 265(3): 220-225

Quan, W.A.N.G.; Jinping, Q.U. 2006: Mechanical properties and morphological behavior of calcium carbonate-filled polypropylene in dynamic injection molding. Polymer International 55(11): 1330-1335

Kanzawa, T.; Tokumitsu, K. 2011: Mechanical Properties and Morphological Changes of Poly(lactic acid)/Polycarbonate/Poly(butylene adipate-co-terephthalate) Blend Through Reactive Processing. Journal of Applied Polymer Science 121(5): 2908-2918

Kalaitzidou, K.; Fukushima, H.; Drzal, L.T. 2007: Mechanical properties and morphological characterization of exfoliated graphite-polypropylene nanocomposites. Composites. Part A, Applied Science and Manufacturing 38(7): 1675-1682

Zhanpai, S.U.; Pingkai, J.I.A.N.G.; Qiang, L.I.; Ping, W.E.I.; Genlin, W.A.N.G.; Yong, Z.H.A.N.G. 2004: Mechanical properties and morphological structures relationship of blends based on sulfated EPDM ionomer and polypropylene. Journal of Applied Polymer Science 94(4): 1504-1510

Singh, S.; Srivastava, V.K.; Prakash, R. 2012: Mechanical properties and morphological studies of C/C-SiC composites. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 534: 707-710

Daoji, G.A.N.; Wenjing, C.A.O.; Caisheng, S.O.N.G.; Zhijian, W.A.N.G. 2001: Mechanical properties and morphologies of poly(ether ketone ketone)/glass fibers/mica ternary composites. Materials Letters (General Ed.) 51(2): 120-124

Kun, Y.A.N.G.; Qi, Y.A.N.G.; Guangxian, L.I.; Ying, Z.H.A.N.G.; Peng, Z.H.A.N.G. 2007: Mechanical properties and morphologies of polypropylene/single-filler or hybrid-filler calcium carbonate composites. Polymer Engineering and Science 47(2): 95-102

Krupa, I.; Cecen, V.; Boudenne, A.; Krizanova, Z.; Vavra, I.; Srnanek, R.; Radnoczi, G. 2012: Mechanical Properties and Morphology of Composites Based on the EVA Copolymer Filled with Expanded Graphite. Polymer-Plastics Technology and Engineering (Softcover Ed) 51(13-15): 1388-1393

Lin, S.H.; Ma, C.C.M.; Tai, N.H. 1997: Mechanical properties and morphology of different carbon fiber lengths in reinforced polyetheretherketone(PEEK) composites. Journal of Advanced Materials 28(2): 56-62

Ratna, D. 2001: Mechanical properties and morphology of epoxidized soyabean-oil-modified epoxy resin. Polymer International 50(2): 179-184

Prolongo, M.G.; Arribas, C.; Salomt, C.; Masegosa, R.M. 2007: Mechanical properties and morphology of epoxy/poly(vinyl acetate)/poly(4-vinyl phenol) brominated system. J. Therm. Anal. Calorim 87(1): 33-39

Hagstrand, P.O.; Oksman, K. 2001: Mechanical properties and morphology of flax fiber reinforced melamine-formaldehyde composites. Polymer Composites 22(4): 568-578

Liang, J.Z.; Li, R.K.Y. 1998: Mechanical properties and morphology of glass bead-filled polypropylene composites. Polymer Composites 19(6): 698-703

Gupta, A.K.; Rana, S.K.; Deopura, B.L. 1992: Mechanical properties and morphology of high-density polyethylene/linear low-density polyethylene blend. Journal of Applied Polymer Science 46(1): 99-108

Song, J.M.; Luqman, M.; Kim, J.S.; Shin, K. 2007: Mechanical properties and morphology of homoblends of a poly(ethyl acrylate) ionomer having one ion pair per ionic repeat unit and a poly(ethyl acrylate) lonomer having two ion pairs. Journal of Polymer Science. Part B. Polymer Physics 45(9): 1045-1052

Hosseini Ravandi, S.A.; Hassanabadi, E.; Tavanai, H.; Abuzade, R.A. 2012: Mechanical Properties and Morphology of Hot Drawn Polyacrylonitrile Nanofibrous Yarn. Journal of Applied Polymer Science 124(6): 5002-5009

Oksman, K.; Clemons, C. 1998: Mechanical properties and morphology of impact modified polypropylene-wood flour composites. Journal of Applied Polymer Science 67(9): 1503-1513

Coppola, F.; Greco, R.; Martuscelli, E.; Kammer, H.W.; Kummerlowe, C. 1987: Mechanical properties and morphology of isotactic polypropylene/ethylene-propylene copolymer blends. Polymer (Guildford) 28(1): 47-56

Xie, W.B.; Tam, K.C.; Yue, C.Y.; Lam, Y.C.; Li, L.; Hu, X. 2003: Mechanical properties and morphology of LCP/ABS blends compatibilized with a styrene-maleic anhydride copolymer. Polymer International 52(5): 733-739

Shan, G.F.; Wei, Y.A.N.G.; Xie, B.H.; Yang, M.B. 2007: Mechanical properties and morphology of LDPE/PP blends. Journal of Macromolecular Science. Physics 46(5): 963-974

Sang Hee, J.A.N.G.; Bong Shik, K.I.M. 1994: Mechanical properties and morphology of liquid crystalline copolyester-amide and amorphous polyamide blends. Polymer Engineering and Science 34(10): 847-856

Bhattacharyya, A.R.; Poischke, P. 2006: Mechanical properties and morphology of melt-mixed PA6/SWNT composites : Effect of reactive coupling. Macromol. Symp: 161-169

Antunes, M.; Realinho, V.; Ardanuy, M.; Maspoch, M.L.I.; Velasco, J.I. 2011: Mechanical Properties and Morphology of Multifunctional Polypropylene Foams. Cellular Polymers 30(4): 187-200

Dolomanova, V.; Rauhe, J.C.M.; Jensen, L.R.; Pyro, R.; Barros Timmons, A. 2011: Mechanical properties and morphology of nano-reinforced rigid PU foam. Journal of Cellular Plastics 47(1): 81-93

Kannan, M.; Bhagawan, S.S.; Joseph, K.; Thomas, S. 2009: Mechanical Properties and Morphology of Nanoclay Filled Different TPU/PP Blend Nanocomposites: Structure: Property Relations. Journal of Composite Materials 43(18): 1915-1925

Kannan, M.; Bhagawan, S.S.; Joseph, K.; Thomas, S. 2009: Mechanical Properties and Morphology of Nanoclay-Filled Different TPU/PP Blends. Polymer-Plastics Technology and Engineering (Softcover Ed) 48(7-9): 871-876

De Sousa, F.D.B.; Mantovani, G.L.; Scuracchio, C.H. 2011: Mechanical properties and morphology of NBR with different clays. Polymer Testing 30(8): 819-825

Sreenivasan, P.V.; Kurian, P. 2007: Mechanical Properties and Morphology of Nitrile Rubber Toughened Polystyrene. International Journal of Polymeric Materials 56(10-12): 1041-1050

Majumdar, B.; Keskkula, H.; Paul, D.R. 1994: Mechanical properties and morphology of nylon-6/acrylonitrile-butadiene-styrene blends compatibilized with imidized acrylic polymers. Polymer (Guildford) 35(25): 5453-5467

Unal, H.; Mimaroglu, A.; Alkan, M. 2004: Mechanical properties and morphology of nylon-6 hybrid composites. Polymer International 53(1): 56-60

Guosheng, H.U.; Yalin, M.A.; Biaobing, W.A.N.G. 2009: Mechanical properties and morphology of nylon 11/tetrapod-shaped zinc oxide whisker composite. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 504(1-2): 8-12

Tang, D.Y.; Qiao, Y.J.; Zhang, Y.F. 2008: Mechanical properties and morphology of organic silicon/polyurethane IPNs prepared by sol-gel method. Proc. Spie Int. Soc. Opt. Eng 6423: 64234D.1-64234D.6

Bhattacharyya, A.R.; Maiti, S.N.; Misra, A. 2002: Mechanical properties and morphology of PA6/EVA blends. Journal of Applied Polymer Science 85(8): 1593-1606

Chian, K.S.; Du, X.Y.; Goy, H.A.; Feng, J.L.; Yi, S.; Yue, C.Y. 2002: Mechanical properties and morphology of poly(ethylene glycol)-side-chain-modified bismaleimide polymer. Journal of Applied Polymer Science 86(3): 715-724

Jun, L.I.; Shanks, R.A.; Yu, L.O.N.G. 2000: Mechanical properties and morphology of polyethylene-polypropylene blends with controlled thermal history. Journal of Applied Polymer Science 76(7): 1151-1164

Ge, X.G.; George, S.; Law, S.; Sain, M. 2011: Mechanical Properties and Morphology of Polylactide Composites with Acrylic Impact Modifier. Journal of Macromolecular Science. Physics 50(10-11-12): 2070-2083

Singh, G.; Bhunia, H.; Rajor, A.; Jana, R.N.; Choudhary, V. 2010: Mechanical Properties and Morphology of Polylactide, Linear Low-Density Polyethylene, and Their Blends. Journal of Applied Polymer Science 118(1): 496-502

Boo Young, S.H.I.N.; Sang Hee, J.A.N.G.; In Jae, C.H.U.N.G.; Bong Shik, K.I.M. 1992: Mechanical properties and morphology of polymer blends of poly(ethylene terephthalate) and semiflexible thermotropic liquid crystalline polyesters. Polymer Engineering and Science 32(1): 73-79

Stamhuis, J.E. 1988: Mechanical properties and morphology of polypropylene composites. III: Short glass fiber reinforced elastomer modified polypropylene. Polymer Composites 9(4): 280-284

Stamhuis, J.E. 1984: Mechanical properties and morphology of polypropylene composites. Talc-filled, elastomer-modified polypropylene. Polymer Composites 5(3): 202-207

Zhimin, X.I.E.; Jing, S.H.E.N.G.; Zhimin, W.A.N. 2001: Mechanical properties and morphology of polypropylene/polystyrene blends*. Journal of Macromolecular Science. Physics 40(2): 251-261

Qiu, G.X.; Zhang, P.; Pan, J.X.; Xie, Y.; Zhao, S.G. 2003: Mechanical properties and morphology of polypropylene toughened with metallocene polymerized polyethylene elastomers. Polymer-Plastics Technology and Engineering (Softcover Ed) 42(1): 33-44

Lin, H.R.; Lin, C.T. 1999: Mechanical properties and morphology of recycled plastic wastes by solution blending. Polymer-Plastics Technology and Engineering (Softcover Ed) 38(5): 1031-1050

Byung Chul, J.A.N.G.; Soo Young, H.U.H.; Jeong Gyu, J.A.N.G.; Young Chan, B.A.E. 2001: Mechanical properties and morphology of the modified HDPE/starch reactive blend. Journal of Applied Polymer Science 82(13): 3313-3320

Nomura, T.; Nishio, T.; Sato, H.; Sano, H. 1993: Mechanical properties and morphology of the polypropylene and ethylene-propylene rubber blends. Kobunshi Ronbunshu (Tokyo) 50(1): 19-25

Yue, M.Z.; Chian, K.S. 1996: Mechanical properties and morphology of thermoplastic polyurethane elastomer with pol(vinylidene fluoride) blends. Journal of Applied Polymer Science 60(4): 597-603

Xing, W.E.I.; Yafei, L.U.; Li, H.U.A.N.G. 2011: Mechanical Properties and Morphology of UHMWPE/PC/HDPE-g-MAH Blends. Polymer-Plastics Technology and Engineering (Softcover Ed) 50(1-3): 190-195

Liu, Y.L.; Cai, Z.Q.; Wang, W.C.; Xiufang, W.E.N.; Pihui, P.I.; Dafeng, Z.H.E.N.G.; Jiang, C.H.E.N.G.; Zhuoru, Y.A.N.G. 2011: Mechanical Properties and Morphology Studies of Thermosets from a Liquid-Crystalline Epoxy Resin with Biphenol and Aromatic Ester Groups. Macromolecular Materials and Engineering 296(1): 83-91

Benkassem, S.; Capolungo, L.; Cherkaoui, M. 2007: Mechanical properties and multi-scale modeling of nanocrystalline materials. Acta Materialia 55(10): 3563-3572

Brown, G.M.; Ellyin, F. 2011: Mechanical Properties and Multiscale Characterization of Nanofiber-Alumina/Epoxy Nanocomposites. Journal of Applied Polymer Science 119(3): 1459-1468

Sahu, R.; Chatterjee, S.; Sahoo, K.L. 2010: Mechanical Properties and Nanocrystallization Behavior of Al-Ni-La Alloys. Metall. Mater. Trans., A Phys. Metall. Mater. Sci 41(4): 861-869

Osaka, N.; Kato, M.; Saito, H. 2013: Mechanical Properties and Network Structure of Phenol Resin Crosslinked Hydrogenated Acrylonitrile-Butadiene Rubber. Journal of Applied Polymer Science 129(6): 3396-3403

Morito, F.; Shiraishi, K. 1991: Mechanical properties and neutron-irradiation effects in teh welds of molybdenum and its alloys. J. Nucl. Mater 179-81(A): 592-595

Badiche, X.; Forest, S.; Guibert, T.; Bienvenu, Y.; Bartout, J.D.; Ienny, P.; Croset, M.; Bernet, H. 2000: Mechanical properties and non-homogeneous deformation of open-cell nickel foams : application of the mechanics of cellular solids and of porous materials. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 289(1-2): 276-288

Baoli, O.U.; Zhihua, Z.H.O.U.; Qingquan, L.I.U.; Bo, L.I.A.O.; Yan, X.I.A.O.; Juncheng, L.I.U.; Xin, Z.H.A.N.G.; Duxin, L.I.; Qiuguo, X.I.A.O.; Shaohua, S.H.E.N. 2014: Mechanical Properties and Nonisothermal Crystallization Kinetics of Polyamide 6/Functionalized TiO2 Nanocomposites. Polymer Composites 35(2): 294-300

Li, J.U.N.; Liu, Y.I.N.G.; Lian, L.I.X.I.A.N.; Yang, X.U.E.J.U.A.N. 2012: Mechanical properties and oil content of CNT reinforced porous CuSn oil bearings. Composites. Part B, Engineering 43(4): 1681-1686

Sideridis, E.; Kytopoulos, V.N.; Prassianakis, I.N.; Bourkas, G.D.; Sakellaris, J.K. 2011: Mechanical properties and operational damage evaluation of CSM composites by destructive and non-destructive techniques. International Journal of Microstructure and Materials Properties 6(1-2): 157-179

Niwa, T.; Mizukami, J.; Hasegawa, S.; Sugimoto, M.; Hibi, S. 1994: Mechanical properties and orientation behavior with rolling and off-axis angle re-drawing of poly(ethylene terephthalate) films. Kobunshi Ronbunshu (Tokyo) 51(1): 17-25

Jijun, W.A.N.G.; Jun, Z.H.A.O.; Qun, G.U.; Deyan, S.H.E.N. 2001: Mechanical properties and orientation of atactic poly(methyl methacrylate): Sub-Tg annealing and stereocomplex formation. Macromolecular Rapid Communications 22(12): 948-951

Motoyasu, G.; Kadowaki, H.; Soda, H. 1999: Mechanical properties and orientations of zinc single crystal wires produced by the OCC process. Nippon Kinzoku Gakkaishi (1952) 63(5): 669-674

Changjie, F.E.N.G.; Mingsheng, L.I.; Li, X.I.N.; Shenglong, Z.H.U.; Fuhui, W.A.N.G. 2006: Mechanical properties and oxidation behavior of a graded (Ti,Al)N coating deposited by arc-ion plating. Oxidation of Metals 65(5-6): 307-327

Janney, M.A. 1987: Mechanical properties and oxidation behavior of a hot-pressed SiC-15-vol%-TiB2 composite. American Ceramic Society Bulletin 66(2): 322-324

Gogotsi, Y.G.; Porz, F.; Yaroshenko, V.P. 1992: Mechanical properties and oxidation behavior of Al2O3-AlN-TiN composites. Journal of the American Ceramic Society 75(8): 2251-2259

Wu, Y.; Zhen, L.; Li, X.W.; Yang, D.Z.; Umakoshi, Y. 2006: Mechanical properties and oxidation behavior of the Ti-24Al-14Nb-3V-0.5Mo alloy sheet. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 427(1-2): 42-50

Kwang Ho, K.I.M.; Bum Hee, P.A.R.K. 1999: Mechanical properties and oxidation behavior of Ti-Si-N films prepared by plasma-assisted CVD. Chemical Vapor Deposition 5(6): 275-279

Bobzin, K.; Bagcivan, N.; Immich, P.; Bolz, S.; Cremer, R.; Leyendecker, T. 2008: Mechanical properties and oxidation behaviour of (Al,Cr)N and (Al,Cr,Si)N coatings for cutting tools deposited by HPPMS. International Conference on Metallurgical Coatings and Thin Films 517(3): 1251-1256

Desmaisonbrut, M.; Montintin, J.; Valin, F.; Boncoeur, M. 1994: Mechanical properties and oxidation behaviour of HIPed hafnium nitride ceramics. Jeni 9: Journees d'Etudes sur les Nitrures 13(4): 379-386

Song, B.I.; Genliang, H.O.U.; Xunjia, S.U.; Yudong, Z.H.A.N.G.; Feng, G.U.O. 2011: Mechanical properties and oxidation resistance of α-alumina/multi-walled carbon nanotube composite ceramics. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 528(3): 1596-1601

Sato, K.; Morozumi, H.; Funayama, O.; Isoda, T. 1999: Mechanical properties and oxidation resistance of C-B-Si coated silicon nitride fiber reinforced Si-N-C composites with cross-ply structure. International Symposium on Ceramic Matrix Composites 30(4): 577-581

Diserens, M.; Patscheider, J.; Levy, F. 1999: Mechanical properties and oxidation resistance of nanocomposite TiN-SiNx physical-vapor-deposited thin films. Surf. Coat. Technol 120-21: 158-165

Koh, Y.H.; Kim, H.W.; Kim, H.E. 2001: Mechanical properties and oxidation resistance of Si3N4-SiC nanocomposites. Scr. Mater 44(8-9): 2069-2073

Okamoto, Y.; Hirosaki, N.; Akimune, Y.; Mitomo, M. 1995: Mechanical properties and oxidation resistance of silicon nitride produced from low purity β-powder. Nippon Seramikkusu Kyokai Gakujutsu Ronbunshi 103(7): 720-723

Li, S.B.; Xie, J.X.; Zhang, L.T.; Cheng, L.F. 2003: Mechanical properties and oxidation resistance of Ti3SiC2/SiC composite synthesized by in situ displacement reaction of Si and TiC. Materials Letters (General Ed.) 57(20): 3048-3056

Bauer, C.; Leiste, H.; Stuber, M.; Ulrich, S.; Holleck, H. 2002: Mechanical properties and performance of magnetron-sputtered graded diamond-like carbon films with and without metal additions. Diamond 2001: European Conference on Diamond, Diamond-Like Materials, Carbon Nanotubes, Nitrides and Silicon Carbide 11(3-6): 1139-1142

Bataille, P.; Boisse, S.; Schreiber, H.P. 1987: Mechanical properties and permeability of polypropylene and poly(ethylene terephthalate) mixtures. Polymer Engineering and Science 27(9): 622-626

Bataille, P.; Boisse, S.; Schreiber, H.P. 1986: Mechanical properties and permeability of polypropylene and polyethylene terephthalate mixtures. Journal of Elastomers and Plastics 18(4): 228-232

Kaito, A.; Kyotani, H.; Tanigaki, N.; Wada, M.; Yoshida, M. 2000: Mechanical properties and phase behaviour of poly(dimethylsilylene-co-methyl-n-propylsilylene). Polymer (Guildford) 41(16): 6395-6402

Mishima, Y.; Suzuki, T. 1989: Mechanical properties and phase stability of L12Ni3Al ternary compounds - Propriétés mécaniques et stabilité de phase des composés ternaires Ni3Al de type L12. Nato Advanced Study Institute on Alloy Phase Stability (1987) 163: 23-27

Jun, Z.H.A.N.G.; Wenying, G.U.O.; Yu, Z.H.A.N.G.; Qiang, G.U.O.; Chuang, W.A.N.G.; Lipeng, Z.H.A.N.G. 2009: Mechanical properties and phase structure of (TiAlZr)N films deposited by multi arc ion plating. International Conference on Technological Advances of Thin Films and Surface Coatings 4 517(17): 4830-4834

Oishi, M.; Kitano, Y.; Iwanaga, H.; Masaki, T. 1996: Mechanical properties and phase structure of yttria-stabilized tetragonal zirconia polycrystals after low-temperature aging for long term. Materials Science Research International 2(3): 181-186

Yang, L.I.U.; Meifang, Z.H.U.; Xiaoli, L.I.U.; Jiang, Y.M.; Ma, Y.; Qin, Z.Y.; Kuckling, D.; Adler Hj, P. 2007: Mechanical properties and phase transition of high clay content clay/poly(N-isopropylacrylamide) nanocomposite hydrogel. Macromol. Symp: 353-360

Chiriac, M.; Chiriac, V.; Vasile, C.; Burlacel, M. 1999: Mechanical properties and plastic deformation of PA-6 and of some of PA-6 composites and blends. International Journal of Polymeric Materials 44(1-2): 73-93

Leng, Y.X.; Chen, J.Y.; Yang, P.; Sun, H.; Wan, G.J.; Huang, N. 2003: Mechanical properties and platelet adhesion behavior of diamond-like carbon films synthesized by pulsed vacuum arc plasma deposition. Surface Science 531(2): 177-184

Katz, A.; Bentur, A. 1994: Mechanical properties and pore structure of carbon fiber reinforced cementitious composites. Cement and Concrete Research 24(2): 214-220

Sawalha, H.; Schroen, K.; Boom, R. 2008: Mechanical properties and porosity of polylactide for biomedical applications. Journal of Applied Polymer Science 107(1): 82-93

Ahmed, Y.M.Z.; Iskander, B.A.; Ibrahim, M.; Shalabi, M.E.H. 2009: Mechanical properties and porosity relationship of porous iron compacts. Powder Metallurgy 52(1): 72-79

Jesseman, R.J.; Murphy, G.J. 1984: Mechanical properties and precipitation hardening response in ARMCO NI-COP (ASTM A710 grade A and A736) alloy steel - Propriétés mécaniques et durcissement par précipitation de l'acier allié ARMCO NI-COP (ASTM A710 Grade A et A736). Atb Metallurgie 23(4): 8.1-8.10

Jesseman, R.J.; Murphy, G.J. 1984: Mechanical properties and precipitation-hardening response in ASTM A710 grade A and A736 alloy steel plates. Journal of Heat Treating 3(3): 228-236

Park, E.S. 2007: Mechanical properties and processibilty of glass-fiber-, wollastonite-, and fluoro-rubber-reinforced silicone rubber composites. Journal of Applied Polymer Science 105(2): 460-468

Vyskocil, J.; Siroky, P.; Vorlicek, V.; Perina, V. 1996: Mechanical properties and Raman spectra of a-C:H and a-C:H:N coatings. Diamond Films '95: European Conference on Diamond, Diamond-Like and Related Materials 5(3-5): 466-470

Xu, S.; Flynn, D.; Tay, B.K.; Prawer, S.; Nugent, K.W.; Silva, S.R.P.; Lifshitz, Y.; Milne, W.I. 1997: Mechanical properties and Raman spectra of tetrahedral amorphous carbon films with high sp3 fraction deposited using a filtered cathodic arc. Philosophical Magazine. B. Physics of Condensed Matter. Statistical Mechanics, Electronic, Optical and Magnetic Properties 76(3): 351-361

Kim, B.R.; Woo, K.D.; Yoon, J.K.; Doh, J.M.; Shon, I.J. 2009: Mechanical properties and rapid consolidation of binderless niobium carbide. Journal of Alloys and Compounds 481(1-2): 573-576

Valyano, G.E.; Ivanov, D.A.; Krylov, A.V.; Mindlina, N.A. 1995: Mechanical properties and recrystallization of alumina ceramics reinforced by silicon carbide whisker. Refractories (New York) 36(5-6): 135-138

Siriwardena, S.; Ismail, H.; Ishiaku, U.S. 2002: Mechanical properties and recyclability of thermoplastic elastomer composites of white rice husk ash-ethylene/propylene/diene terpolymer-polypropylene. Plast. Rubber Compos 31(4): 167-176

Ming, T.I.A.N.; Lili, S.U.; Weiting, C.A.I.; Shi, Y.I.N.; Qi, C.H.E.N.; Hao, F.O.N.G.; Liqun, Z.H.A.N.G. 2011: Mechanical Properties and Reinforcement Mechanisms of Hydrogenated Acrylonitrile Butadiene Rubber Composites Containing Fibrillar Silicate Nanofibers and Short Aramid Microfibers. Journal of Applied Polymer Science 120(3): 1439-1447

Tamura, H.; Mito, T.; Iwamoto, A.; Yamada, Y.; Tachikawa, K. 2002: Mechanical properties and reinforcement of Bi-2212 tubular bulk superconductor for current lead. Ieee Trans. Appl. Supercond 12(1): 1319-1322

Azevedo, E.P.; Saldanha, T.D.P.; Navarro, M.V.M.; Medeiros, A.C.; Ginani, M.F.; Raffin, F.N. 2006: Mechanical properties and release studies of chitosan films impregnated with silver sulfadiazine. Journal of Applied Polymer Science 102(4): 3462-3470

Nakamura, S.I.; Suzumura, K.; Tarui, T. 2004: Mechanical properties and remaining strength of corroded bridge wires. Structural Engineering International 14(1): 50-54

Ko, S.; Lee, D.; Jee, S.; Park, H.; Lee, K.; Hwang, W. 2006: Mechanical properties and residual stress in porous anodic alumina structures. Thin Solid Films 515(4): 1932-1937

Ren, X.D.; Zhang, T.; Zhang, Y.K.; Jiang, D.W.; Yongzhuo, H.F.; Guan, H.B.; Qian, X.M. 2011: Mechanical properties and residual stresses changing on 00Cr12 alloy by nanoseconds laser shock processing at high temperatures. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 528(4-5): 1949-1953

De la Vega, J.; Bogue, D.C. 1987: Mechanical properties and residual stresses in non-equilibrium glasses. Chemical Engineering Communications 53(1-6): 23-31

Lin, J.D.; Duh, J.G.; Lo, C.L. 2003: Mechanical properties and resistance to hydrothermal aging of ceria- and yttria-doped tetragonal zirconia ceramics. Materials Chemistry and Physics 77(3): 808-818

Sakuma, Y.; Matsumura, O.; Takechi, H. 1991: Mechanical properties and retained austenite in intercritically heat-treated bainite-transformed steel and their variation with Si and Mn additions. Metallurgical Transactions. A, Physical Metallurgy and Materials Science 22(2): 489-498

Sun, H.; Peng, H.E.; Shugao, Z.H.A.O.; Zhanxun, C.H.E.N. 2011: Mechanical Properties and Rheological Behavior of Dynamically Vulcanized Trans-Polyisoprene/Polypropylene Blends. Journal of Macromolecular Science. Physics 50(7-9): 1423-1429

Narkhede, J.S.; Shertukde, V.V. 2011: Mechanical Properties and Rheological Behavior of Poly(butylene terephthalate)/Clay Nanocomposites with Different Organoclays. Journal of Applied Polymer Science 119(2): 1067-1074

Liting, Y.A.N.G.; Guodong, L.I.U.; Donghai, S.U.N.; Weina, W.A.N.G.; Jungang, G.A.O.; Liucheng, Z.H.A.N.G.; Riguang, J.I.N. 2002: Mechanical properties and rheological behavior of PVC blended with terpolymers containing N-phenylmaleimide. Journal of Vinyl and Additive Technology 8(2): 151-158

Zhang, Y.; Tao, N.R.; Lu, K. 2008: Mechanical properties and rolling behaviors of nano-grained copper with embedded nano-twin bundles. Acta Materialia 56(11): 2429-2440

Borrerolopez, O.; Hoffman, M.; Bendavid, A.; Martin, P.J. 2011: Mechanical properties and scratch resistance of filtered-arc-deposited titanium oxide thin films on glass. Thin Solid Films 519(22): 7925-7931

Ahmed, A.; Bahadur, S.; Cooler, B.A.; Peters, J. 2006: Mechanical properties and scratch test studies of new ultra-hard AlMgB14 modified by TiB2. Tribology International 39(2): 129-137

Choi, J.W.; Cha, H.S.; Oh, T.S. 2002: Mechanical properties and shear strength of Sn-3.5Ag-Bi solder alloys : Lead-free electronics packaging. Materials Transactions - Jim 43(8): 1864-1867

Kramar, D.; Bindiganavile, V. 2011: Mechanical properties and size effects in lightweight mortars containing expanded perlite aggregate. Materials and Structures 44(4): 735-748

Xie, G.Y.; Zhong, Y.J.; Sui, G.X.; Rui, Y.A.N.G. 2010: Mechanical Properties and Sliding Wear Behavior of Potassium Titanate Whiskers-Reinforced Poly(ether ether ketone) Composites Under Water-Lubricated Condition. Journal of Applied Polymer Science 117(1): 186-193

Song, J.I.; Han, K.S. 1997: Mechanical properties and solid lubricant wear behavior of Al/Al2O3/C hybrid metal matrix composites fabricated by squeeze casting method. Journal of Composite Materials 31(4): 316-344

Guibo, W.U.; Chengxiang, L.U.; Xufu, C.A.I.; Xiancheng, R.E.N. 2011: Mechanical Properties and Solid State Structure of Photodegraded Polyoxymethylene and Effect of UV-Stabilizers Modification. Journal of Macromolecular Science. Physics 50(1-3): 503-516

Guibo, W.U.; Chengxiang, L.U.; Xufu, C.A.I.; Xiancheng, R.E.N. 2011: Mechanical Properties and Solid-State Structure of Photodegraded Polyoxymethylene and Effect of UV Stabilizers Modification. Journal of Macromolecular Science. Physics 50(7-9): 1521-1534

Lee, J.W.; Lee, J.C.; Pandey, J.; Ahn, S.H.; Yeon June, K.A.N.G. 2010: Mechanical Properties and Sound Insulation Effect of ABS/Carbon-black Composites. Journal of Composite Materials 44(14): 1701-1716

Elnagar, K.; Sanad, S.H.; Mohamed, A.S.; Ramadan, A. 2005: Mechanical properties and stability to light exposure for dyed Egyptian cotton fabrics with natural and synthetic dyes. Polymer-Plastics Technology and Engineering (Softcover Ed) 44(7): 1269-1279

Michael, P.C.; Aized, D.; Rabinowicz, E.; Iwasa, Y. 1990: Mechanical properties and static friction behaviour of epoxy mixes at room temperature and at 77K. Cryogenics (Guildford) 30(9): 775-786

Amm, B.C.; Hascicek, Y.S.; Schwartz, J.; Xiao, L.Y. 1998: Mechanical properties and strain effects in Bi2Sr2CaCu2Ox/Ag composite conductors. Adv. Cryog. Eng 44: 671-678

Schwartz, J.; Amm, B.C.; Garmestani, H.; Hilton, D.K.; Hascicek, Y. 1997: Mechanical properties and strain effects in Bi2Sr2CaCu2Ox/AgMg composite conductors. Ieee Trans. Appl. Supercond 7(2): 2038-2041

Wu, H.Y.; Lin, F.Z. 2010: Mechanical properties and strain-hardening behavior of Mg alloy AZ31B-H24 thin sheet. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 527(4-5): 1194-1199

Cheng, S.K.; Chen, C.Y. 2004: Mechanical properties and strain-rate effect of EVA/PMMA in situ polymerization blends. European Polymer Journal 40(6): 1239-1248

Seica, M.V.; Packer, J.A. 2004: Mechanical properties and strength of aged cast iron water pipes. Journal of Materials in Civil Engineering 16(1): 69-77

Kumar, M.; Vasudevan, V.K. 1996: Mechanical properties and strengthening of a Ni-25Mo-8Cr alloy containing Ni2(Mo,Cr) precipitates. Acta Materialia 44(12): 4865-4880

De Rosa, C.; Auriemma, F.; Villani, M.; De Ballesteros, O.R.; Di Girolamo, R.; Tarallo, O.; Malafronte, A. 2014: Mechanical Properties and Stress-Induced Phase Transformations of Metallocene Isotactic Poly(1-butene): The Influence of Stereodefects. Macromolecules 47(3): 1053-1064

Yamamoto, G.; Omori, M.; Yokomizo, K.; Hashida, T. 2008: Mechanical properties and structural characterization of carbon nanotube/alumina composites prepared by precursor method. European Conference on Diamond, Diamond-Like Materials, Carbon Nanotubes, Nitrides and Silicon Carbide 17(7-10): 1554-1557

Lee, S.; Sang Kuk, W.O.O.; Kee Sung, L.E.E.; Do Kyung, K.I.M. 2006: Mechanical properties and structural stability of perovskite-type, oxygen-permeable, dense membranes. Desalination (Amst.) 193(1-3): 236-243

Lammers, M.; Klop, E.A.; Northolt, M.G.; Sikkema, D.J. 1998: Mechanical properties and structural transitions in the new rigid-rod polymer fibre PIPD ('M5') during the manufacturing process. Polymer (Guildford) 39(24): 5999-6005

Gulyaev, A.A.; Svistunova, E.L.; Sushok, V.V.; Bulanenko, V.F.; Pirusskii, M.V. 1990: Mechanical properties and structure of age-hardenable invar alloy 40 NL. Metal Science and Heat Treatment 32(9-10): 694-701

Kulikovsky, V.; Vorlicek, V.; Bohac, P.; Ctvrtlik, R.; Stranyanek, M.; Dejneka, A.; Jastrabik, L. 2009: Mechanical properties and structure of amorphous and crystalline B4C films. Diamond and Related Materials 18(1): 27-33

Kussmaul, K.; Blind, D.; Deimel, P.; Gaudig, W. 1984: Mechanical properties and structure of electron beam welds in alloy Fe-0.2%C-12%Cr-1%Mo - Propriétés mécaniques et structures des soudures par faisceau d'électrons en alliage Fe-0,2%C-12%Cr-1%Mo. Welding Journal 63(9): 267S-272S

Jie, Z.H.A.N.G.; Kaizhi, S.H.E.N.; Yuegin, G.A.O.; Yi, Y.U.A.N. 2005: Mechanical properties and structure of high-density polyethylene samples prepared by injection molding with low-frequency vibration. Journal of Applied Polymer Science 96(3): 818-823

Chang, S.Y.; Tezuka, H.; Kamio, A. 1997: Mechanical properties and structure of ignition-proof Mg-Ca-Zr alloys produced by squeeze casting. Materials Transactions - Jim 38(6): 526-535

Oura, J.I.; Shibayama, M.; Sakurai, S.; Nomura, S.; Iwamoto, T. 1996: Mechanical properties and structure of nylon 6/aromatic polyamide blend film. Kobunshi Ronbunshu (Tokyo) 53(7): 453-460

Okuzaki, H.; Ikeda, N.; Kubota, I.; Kunugi, T. 1999: Mechanical properties and structure of poly(p-phenylenevinylene) films prepared by the zone-reaction method. Macromolecules 32(17): 5606-5612

Haraguchi, K.; Li, H.J. 2006: Mechanical properties and structure of polymer-clay nanocomposite gels with high clay content. Macromolecules 39(5): 1898-1905

Motokawa, T. 1983: Mechanical properties and structure of the spine-joint central ligament of the sea urchin, Diadema setosum (Echinodermata, Echinoidea). Journal of Zoology (1965) 201(2): 223-235

Okuzaki, H.; Kubota, I.; Kunugi, T. 1999: Mechanical properties and structure of the zone-drawn poly(L-lactic acid) fibers. Journal of Polymer Science. Part B. Polymer Physics 37(10): 991-996

Alonso, F.; Arizaga, A.; Quainton, S.; Ugarte, J.J.; Viviente, J.L.; Onate, J.I. 1995: Mechanical properties and structure of Ti-6Al-4V alloy implanted with different light ions. International Conference on Plasma Surface Engineering 74-75(1-3): 986-992

Wulff, H.; Lunk, A.; Basner, R. 1990: Mechanical properties and structure of TiN coatings deposited at different ion energies and titanium flux rates. Vacuum 41(7-9): 2201-2204

Kulikovsky, V.; Ctvrtlik, R.; Vorlicek, V.; Filip, J.; Bohac, P.; Jastrabik, L. 2013: Mechanical properties and structure of TiO2 films deposited on quartz and silicon substrates. Thin Solid Films 542: 91-99

Milovandovich, A.R.; Balayan, R.F. 1986: Mechanical properties and structure of welded joints in a low-carbon structure of pearlitic steel produced by various welding methods - Propriétés mécaniques et structure des joints en aciers à bas carbone à structure perlitique soudés par différentes méthodes. Welding Production 33(5): 31-34

Okuzaki, H.; Hirata, Y.; Kunugi, T. 1999: Mechanical properties and structure of zone-drawn poly(p-phenylene vinylene) films. Polymer (Guildford) 40(10): 2625-2629

Komatsu, T. 1997: Mechanical properties and structure relationships in drawn fibers of elastomer-polyoxymethylene blends. Journal of Polymer Science. Part B. Polymer Physics 35(1): 107-118

Dae Su, K.I.M.; Kyung Min, L.E.E. 2003: Mechanical properties and structures of dicyanate-clay nanocomposites. Journal of Applied Polymer Science 90(10): 2629-2633

Sugiyama, A.; Kobayashi, K.; Nishio, T.; Ozaki, K. 1999: Mechanical properties and structures of rapidly solidified Mg-Al-Zn alloy. Chuzo Kogaku 71(5): 295-300

Compston, P.; Schiemer, J.; Cvetanovska, A. 2008: Mechanical properties and styrene emission levels of a UV-cured glass-fibre/vinylester composite. International Conference on Composite Structures (Iccs/14) 14 86(1-3): 22-26

Rybakova, L.M. 1994: Mechanical properties and substructure of metals. Metal Science and Heat Treatment 36(9-10): 507-513

Chinh, N.Q.; Illy, J.; Juhasz, A.; Lendvai, J. 1995: Mechanical properties and superplasticity of AlZnMg alloys with copper and zirconium additions. Physica Status Solidi. A. Applied Research 149(2): 583-599

Suzuki, A.; Sugimura, T.; Kunugi, T. 2001: Mechanical properties and superstructure of isotactic polypropylene fibers prepared by continuous vibrating zone-drawing. Journal of Applied Polymer Science 81(3): 600-608

Suzuki, A.; Mochiduki, N. 2001: Mechanical properties and superstructure of poly(ethylene terephthalate) fibers zone-drawn and zone-annealed by CO2 laser heating. Journal of Applied Polymer Science 82(11): 2775-2783

Suzuki, A.; Kawasaki, S.; Kunigi, T. 1994: Mechanical properties and superstructure of poly(vinyl alcohol) fibers annealed under extremely high tension. Kobunshi Ronbunshu (Tokyo) 51(3): 201-207

Hiziroglu, S.; Zarate, S. 2007: Mechanical properties and surface characteristics of colombian wood composites. Journal of Composite Materials 41(18): 2225-2234

Akovali, G.; Torun, T.T.; Bayramli, E.; Erinc, N.K. 1998: Mechanical properties and surface energies of low density polyethylene-poly(vinyl chloride) blends. Polymer (Guildford) 39(6-7): 1363-1368

Daojun, Z.H.O.U.; Bin, Y.O.U.; Guibo, W.U.; Xiancheng, R.E.N. 2012: Mechanical properties and surface morphology of photodegraded polyoxymethylene modified by a core―shell acrylate elastomer with UV stabilization. Polymer International 61(6): 971-981

Hedden, R.C.; Saxena, H.; Cohen, C. 2000: Mechanical properties and swelling behavior of end-linked poly(diethylsiloxane) networks. Macromolecules 33(23): 8676-8684

Gaganidze, E.; Petersen, C.; Maternamorris, E.; Dethloff, C.; Weiss, O.J.; Aktaa, J.; Povstyanko, A.; Fedoseev, A.; Makarov, O.; Prokhorov, V. 2011: Mechanical properties and TEM examination of RAFM steels irradiated up to 70 dpa in BOR-60. J. Nucl. Mater 417(1-3): 93-98

Salib, S.; Mironova, M.; Vipulanandan, C.; Salama, K. 1996: Mechanical properties and TEM studies on BPSCCO-2223-Ag composite tapes. Superconductor Science and Technology 9(12): 1071-1076

Somanathan, N.; Arumugam, V.; Sanjeevi, R. 1987: Mechanical properties and temperature dependence of grafted casein films. European Polymer Journal 23(10): 803-807

Wang, Y.J.; Si, C.H.E.N.; Shi, Y.Q.; Dong, Y.X.; Fu, L.D.; Xu, X.B.; Xu, W.A.N.G. 2013: Mechanical Properties and Tensile Deformation Behavior of Polyamide 6/Maleated and Unmaleated Ethylene Propylene Diene Terpolymer/Nano-CaCO3 Ternary Composites. Journal of Macromolecular Science. Physics 52(4-6): 797-811

Shujin, L.I.A.N.G.; Hongfei, S.U.N.; Zuyan, L.I.U.; Erde, W.A.N.G. 2009: Mechanical properties and texture evolution during rolling process of an AZ31 Mg alloy. Journal of Alloys and Compounds 472(1-2): 127-132

Watanabe, H.; Fukusumi, M. 2008: Mechanical properties and texture of a superplastically deformed AZ31 magnesium alloy. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 477(1-2): 153-161

Chu, C.Y.; Routbort, J.L.; Nan, C.H.E.N.; Biondo, A.C.; Kupperman, D.S.; Goretta, K.C. 1992: Mechanical properties and texture of dense polycrystalline Bi2Sr2CaCu2Ox. Superconductor Science and Technology 5(5): 306-312

Barella, S.; Mapelli, C. 2011: Mechanical properties and textures of duplex stainless steel rolled worked by asymmetric rolling. International Journal of Material Forming 4(4): 379-388

Kryuchkov, N.K. 1986: Mechanical properties and the kind of fracture of steels after repeated thermomechanical strengthening of the surface layer - Mechanische Eigenschaften und Bruchart von Staehlen nach mehrmaliger mechanisch-thermischer Verfestigung der Oberflaechenschicht. Metallovedenie i Termiceskaa Obrabotka Metallov 32(4): 61-63

Ksiazek, M.; Tchorz, A.; Boron, L. 2014: Mechanical Properties and the Microstructure of Al2O3/Al/Al2O3 Joints with the Surface Modification of Alumina by a Thin Layer of Ti + Nb : Joining and Interface Design. J. Mater. Eng. Perform 23(5): 1635-1640

Stribeck, N.; Reimers, C.; Ghioca, P.; Buzdugan, E. 1998: Mechanical properties and the two-phase structure inside the heterophase domains of blends from HDPE and SBS star block copolymers. Journal of Polymer Science. Part B. Polymer Physics 36(9): 1423-1432

Osamura, K.; Sugano, M.; Matsumoto, K. 2003: Mechanical properties and their influence to transport property of multifilamentary Bi2223 tape. Ieee Trans. Appl. Supercond 13(2): 3540-3543

Mascia, L.; Zhang, J. 1995: Mechanical properties and thermal ageing of a perfluoroether-modified epoxy resin in castings and glass fibre composites. Composites 26(5): 379-385

Nakazono, T.; Matsumoto, A. 2010: Mechanical Properties and Thermal Aging Behavior of Styrene-Butadiene Rubbers Vulcanized Using Liquid Diene Polymers as the Plasticizer. Journal of Applied Polymer Science 118(4): 2314-2320

Shaojian, L.I.N.; Jiaojiao, S.H.A.N.G.; Jianwu, L.A.N.; Ronghui, G.U.O.; Xia, H.U.A.N.G.; Wen, H.E. 2013: Mechanical Properties and Thermal Degradation Kinetics of a Novel Thermally Stable Thermoplastic Poly(ester-ether) Elastomer Containing N'N-Bis(2-carboxymethyl) Pyromellitimide Unit. Journal of Macromolecular Science. Pure and Applied Chemistry 50(10-12): 1060-1069

Yu, W.A.N.G.; Jun, L.I.A.N.G.; Wenbo, H.A.N.; Xinghong, Z.H.A.N.G. 2009: Mechanical properties and thermal shock behavior of hot-pressed ZrB2-SiC-AlN composites. Journal of Alloys and Compounds 475(1-2): 762-765

Aksel, C. 2003: Mechanical properties and thermal shock behaviour of alumina-mullite-zirconia and alumina-mullite refractory materials by slip casting. Ceramics International 29(3): 311-316

Hvizdos, P.; Jonsson, D.; Anglada, M.; Anne, G.; Van der Biest, O. 2007: Mechanical properties and thermal shock behaviour of an alumina/zirconia functionally graded material prepared by electrophoretic deposition. J. Eur. Ceram. Soc 27(2-3): 1365-1371

Xiaoguang, S.U.N.; Shufen, C.H.E.N.; You, W.A.N.G.; Zhaoyi, P.A.N.; Liang, W.A.N.G. 2012: Mechanical Properties and Thermal Shock Resistance of HVOF Sprayed NiCrAlY Coatings Without and With Nano Ceria. Journal of Thermal Spray Technology 21(5): 818-824

Prusa, F.; Vojtech, D.; Michalcova, A.; Marek, I. 2014: Mechanical properties and thermal stability of Al-Fe-Ni alloys prepared by centrifugal atomisation and hot extrusion. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 603: 141-149

Prusa, F.; Vojtech, D. 2013: Mechanical properties and thermal stability of Al-23Si-8Fe-1Cr and Al-23Si-8Fe-5Mn alloys prepared by powder metallurgy. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 565: 13-20

Tsukuma, K. 1986: Mechanical properties and thermal stability of CeO2 containing tetragonal zirconia polycrystals. American Ceramic Society Bulletin 65(10): 1386-1389

Su, J.F.; Wang, L.X.; Li, R.E.N.; Zhen, H.U.A.N.G. 2007: Mechanical properties and thermal stability of double-shell thermal-energy-storage microcapsules. Journal of Applied Polymer Science 103(2): 1295-1302

Okuda, S.; Kobiyama, M.; Inami, T. 1999: Mechanical properties and thermal stability of nanocrystalline gold prepared by gas deposition method. Mater. Trans. - Jim 40(5): 412-415

Waku, Y. 1998: Mechanical properties and thermal stability of oxide eutectic composites at high temperatures. Materials and Manufacturing Processes 13(6): 841-858

Kim, H.S.; Byung Hyun, P.A.R.K.; Jae Hoon, C.H.O.I.; Yoon, J.S. 2008: Mechanical Properties and Thermal Stability of Poly(L-lactide)/Calcium Carbonate Composites. Journal of Applied Polymer Science 109(5): 3087-3092

Stefani, P.M.; Cyras, V.; Tejeira Barchi, A.; Vazquez, A. 2006: Mechanical properties and thermal stability of rice husk ash filled epoxy foams. Journal of Applied Polymer Science 99(6): 2957-2965

Choi, J.; Hayashi, N.; Kato, T.; Kawaguchi, M. 2013: Mechanical properties and thermal stability of SiBCN films prepared by ion beam assisted sputter deposition. Diamond and Related Materials 34: 95-99

Inoue, A.; Amiya, K.; Katsuya, A.; Masumoto, T. 1995: Mechanical properties and thermal stability of Ti- and Al-based amorphous wires prepared by a melt extraction method. Materials Transactions - Jim 36(7): 858-865

Hongfei, S.H.A.N.G.; Jian, L.I.; Tianmin, S.H.A.O. 2014: Mechanical properties and thermal stability of TiAlN/Ta multilayer film deposited by ion beam assisted deposition. Appl. Surf. Sci 310: 317-320

Ishiaku, U.S.; Lim, F.S.; Mohd Ishak, Z.A.; Perera, M.C.S. 1999: Mechanical properties and thermooxidative aging of a ternary blend, PVC/ENR/NBR, compared with the binary blends of PVC. Polymer-Plastics Technology and Engineering (Softcover Ed) 38(5): 939-954

Ke, W.A.N.G.; Jingshen, W.U.; Lin, Y.E.; Hanmin, Z.E.N.G. 2003: Mechanical properties and toughening mechanisms of polypropylene/barium sulfate composites. Composites. Part A, Applied Science and Manufacturing 34(12): 1199-1205

Lei, T.C.; Zhu, W.Z.; Zhou, Y. 1991: Mechanical properties and toughening mechanisms of SiCW/Al2O3 ceramic composites. Materials Chemistry and Physics 28(1): 89-97

Yu, Z.H.O.U.; Weizhong, Z.U.; Tingchuan, L.E.I. 1992: Mechanical properties and toughening mechanisms of SiCw/ZrO2 (6%mol Y2O3) ceramic composites. Ceramics International 18(3): 141-145

Zhao, X.J.; Zhang, N.; Ru, H.Q.; Liang, B.; Chen, D.L. 2012: Mechanical properties and toughening mechanisms of silicon carbide nano-particulate reinforced Alon composites. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 538: 118-124

Fakirov, S.; Sarac, Z.; Anbar, T.; Boz, B.; Bahar, I.; Evstatiev, M.; Apostolov, A.A.; Mark, J.E.; Kloczkowski, A. 1996: Mechanical properties and transition temperatures of cross-linked oriented gelatin. 1. Static and dynamic mechanical properties of cross-linked gelatin. Colloid and Polymer Science 274(4): 334-341

Fakirov, S.; Sarac, Z.; Anbar, T.; Boz, B.; Bahar, I.; Evstatiev, M.; Apostolov, A.A.; Mark, J.E.; Kloczkowski, A. 1997: Mechanical properties and transition temperatures of crosslinked-oriented gelatin ii. effect of orientation and water content on transition temperatures. Colloid and Polymer Science 275(4): 307-314

Kawaguchi, K. 2006: Mechanical properties and transparency of injection- molded polyacetal with branched and linear structure : Influence of crystalline morphology. Journal of Applied Polymer Science 100(4): 3382-3392

Marsal, A.; Ansart, F.; Turq, V.; Bonino, J.P.; Sobrino, J.M.; Chen, Y.M.; Garcia, J. 2013: Mechanical properties and tribological behavior of a silica or/and alumina coating prepared by sol-gel route on stainless steel. Surf. Coat. Technol 237: 234-240

Okumiya, M.; Griepentrog, M. 1999: Mechanical properties and tribological behavior of TiN-CrAlN and CrN-CrAlN multilayer coatings. Aepse '97 Asian-European International Conference on Plasma Surface Engineering 112(1-3): 123-128

Ding, Y.; Farhat, Z.; Northwood, D.O.; Alpas, A.T. 1994: Mechanical properties and tribological behaviour of nanolayerede Al/Al2O3 and Ti/TiN composites. Surf. Coat. Technol 68-69: 459-467

Meneve, J.; Havermans, D.; Vercammen, K.; Haefke, H.; Gerbig, Y.; Pfluger, E. 2001: Mechanical properties and tribological behaviour of state-of-the-art diamond-like carbon coatings. Advanced Engineering Materials 3(3): 163-166

Long, C.G.; Wang, X.Y. 2004: Mechanical properties and tribology performance of the Ekonol-PEEK composite. Journal of Reinforced Plastics and Composites 23(15): 1575-1582

Ziolkowski, B.; Ates, Z.; Gallagher, S.; Byrne, R.; Heise, A.; Fraser, K.J.; Diamond, D. 2013: Mechanical Properties and UV Curing Behavior of Poly(N-Isopropylacrylamide) in Phosphonium-Based Ionic Liquids. Macromolecular Chemistry and Physics 214(7): 787-796

Botev, M.; Betchev, H.; Bikiaris, D.; Panayiotou, C. 1999: Mechanical properties and viscoelastic behavior of basalt fiber-reinforced polypropylene. Journal of Applied Polymer Science 74(3): 523-531

Alvis, A.; Villamiel, M.; Radamendoza, M. 2010: Mechanical Properties and Viscoelastic Characteristics of two Varieties of Yam Tubers (Dioscorea Alata). Journal of Texture Studies 41(1): 92-99

Yang, Y.L.; Bai, S.L.; Gsell, C.; Hiver, J.M. 2006: Mechanical properties and volume dilatation of HDPE/CaCO3blends with and without impact modifier. Polymer Engineering and Science 46(11): 1512-1522

Alvarez, V.A.; Ruscekaite, R.A.; Vazquez, A. 2003: Mechanical properties and water absorption behavior of composites made from a biodegradable matrix and alkaline-treated sisal fibers. Journal of Composite Materials 37(17): 1575-1588

Aji, I.S.; Zainudin, E.S.; Abdan, K.; Sapuan, S.M.; Khairul, M.D. 2013: Mechanical properties and water absorption behavior of hybridized kenaf/pineapple leaf fibre-reinforced high-density polyethylene composite. Journal of Composite Materials 47(8): 979-990

Alamri, H.; Low, I.M. 2012: Mechanical properties and water absorption behaviour of recycled cellulose fibre reinforced epoxy composites. Polymer Testing 31(5): 620-628

Kamel, S.; Adel, A.M.; Elsakhawy, M.; Nagieb, Z.A. 2008: Mechanical Properties and Water Absorption of Low-Density Polyethylene/Sawdust Composites. Journal of Applied Polymer Science 107(2): 1337-1342

Mebarkia, S.; Vipulanandan, C. 1995: Mechanical properties and water diffusion in polyester polymer concrete. Journal of Engineering Mechanics 121(12): 1359-1365

Guanwen, C.H.E.N.; Hayashi, T.; Nakajima, A. 1984: Mechanical properties and water permeability of the A-B-A tri-block copolymer consisting of poly(γ-benzyl D,L-glutamate) or poly(γ-methyl D,L-glutamate) as the A component and polybutadiene as the B component. Polymer Journal 16(11): 805-814

Joseph, S.; Sreekala, M.S.; Koshy, P.; Thomas, S. 2008: Mechanical Properties and Water Sorption Behavior of Phenol-Formaldehyde Hybrid Composites Reinforced with Banana Fiber and Glass Fiber. Journal of Applied Polymer Science 109(3): 1439-1446

Maksimov, R.D.; Lagzdins, A.; Lilichenko, N.; Plume, E. 2009: Mechanical Properties and Water Vapor Permeability of Starch/Montmorillonite Nanocomposites. Polymer Engineering and Science 49(12): 2421-2429

Pingyi, Z.H.A.N.G.; Whistler, R.L. 2004: Mechanical properties and water vapor permeability of thin film from corn hull arabinoxylan. Journal of Applied Polymer Science 93(6): 2896-2902

Caykara, T.; Eroglu, M.S.; Guven, O. 1998: Mechanical properties and water vapor permeation of vinyltriethoxysilane/methyl methacrylate copolymers. die Angewandte Makromolekulare Chemie (259): 73-76

Lei, S.H.I.; Chufeng, S.U.N.; Ping, G.A.O.; Feng, Z.H.O.U.; Weimin, L.I.U. 2006: Mechanical properties and wear and corrosion resistance of electrodeposited Ni-Co/SiC nanocomposite coating. Applied Surface Science 252(10): 3591-3599

Candela, N.; Anton, N.; Gordo, E.; Velasco, F.; Torralba, J.M. 2001: Mechanical properties and wear behaviour of nitrided Fe-3.5Mo base sintered steels. Materials Science and Technology 17(3): 309-314

Moyen, B.; Besse, J.L.; Lerat, J.L.; Dupuyphillon, J. 1997: Mechanical properties and wear of UHMWPE components : A multifactorial problem. Cah. Enseign. Sofcot 61: 51-55

Klaasen, H.; Kollo, L.; Kubarsepp, J. 2007: Mechanical properties and wear performance of compression sintered TiC based cermets. Powder Metallurgy 50(2): 132-136

Robles Hernandez, F.C.; Demas, N.G.; Davis, D.D.; Polycarpou, A.A.; Maal, L. 2007: Mechanical properties and wear performance of premium rail steels. Wom 2007 : International Conference on Wear of Materials 263(1-6): 766-772

Than Trong, L.O.N.G.; Nishimura, T.; Aisaka, T.; Ose, M.; Morita, M. 1988: Mechanical properties and wear resistance of 6061 alloy reinforced with a hybrid of Al2O3 fibers and SiC whiskers - Propriétés mécaniques et résistance à l'usure de l'alliage 6061 renforcé par un hybride de fibres Al2O3 et SiC. Transactions of the Japan Institute of Metals 29(11): 920-927

Atik, E. 1998: Mechanical properties and wear strengths in aluminium - alumina composites - Propriétés mécanique et résistances à l'usure des alliages aluminium - alumine. Materials and Structures 31(210): 418-422

Tanaka, T.; Osaki, K.; Watanabe, H.; Hoshino, K. 1983: Mechanical properties and weldability of high strength stainless steel bearing 0,03 % or less carbon for railroad vehicles. Tetsu-To-Hagane 69(11): 1456-1462

Dong, L.M.; Han, Z.D.; Guan, Y.Z.; Li, W.; Zhang, X.Y. 2012: Mechanical properties and work function of L21 structure AlCu2X (X = Ti, Mn, Zr, or Hf) intermetallics. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 545: 13-19

Motomura, M.; Sekiguchi, T. 1991: Mechanical properties and workability of Al-Si alloy casting small bar. Keikinzoku 41(2): 77-83

Sukhvarsh, J.E.R.A.T.H.; Yamane, L.C. 1987: Mechanical properties and workability of superplasticized concrete - Propriétés mécaniques et maniabilité d'un béton avec superplastifiant. Cement, Concrete and Aggregates 9(1): 12-19

Shih, C.; Rohbeck, N.; Gopalakrishnan, K.; Tulenko, J.S.; Baney, R.H. 2013: Mechanical properties and XRD studies of silicon carbide inert matrix fuel fabricated by a low temperature polymer precursor route. Journal of Nuclear Materials 432(1-3): 152-159

Mehta, K.K.; Mukhopadhyay, P.; Mandal, R.K.; Singh, A.K. 2014: Mechanical Properties Anisotropy of Cold-Rolled and Solution-Annealed Ni-Based Hastelloy C-276 Alloy. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science 45(8): 3493-3504

Mehta, K.K.; Mukhopadhyay, P.; Mandal, R.K.; Singh, A.K. 2014: Mechanical properties anisotropy of cold rolled and solution annealed Ni-20Cr-8Fe alloy. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 613: 71-81

Min, J.I.N.; Jiayue, X.U.; Minli, S.H.I.; Shiji, F.A.N. 2007: Mechanical properties anisotropy of PZNT93/7 single crystal. Journal of Physics. D, Applied Physics 40(5): 1473-1476

Goulart, P.R.; Spinelli, J.E.; Osorio, W.R.; Garcia, A. 2006: Mechanical properties as a function of microstructure and solidification thermal variables of Al-Si castings. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 421(1-2): 245-253

Ferri, T.V.; Figueiredo, A.P.; Ferreira, C.R.F.; Hormaza, W.; Santos, C.A.; Spim, J.A. 2010: Mechanical properties as a function of microstructure in the new Mg-Al-Ca-La alloy solidified under different conditions. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 527(18-19): 4624-4632

Fukuhara, I.; Ogawa, K.; Yamamoto, Y.; Fujii, K.; Mizuta, K.; Anan, M.; Kaga, S. 1993: Mechanical properties at cryogenic temperature of improved high-manganese steels with electron beam welded joints. Welding International 7(3): 183-188

Chino, Y.; Nakaura, Y.; Ohori, K.; Kamiya, A.; Mabuchi, M. 2007: Mechanical properties at elevated temperature of a hot-deformed Mg-Al-Ca-Mn-Sr alloy. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 452-453: 31-36

Elmagd, E. 1994: Mechanical properties at high strain rates. J. Phys., Iv 4(8): 149-170

Higashi, K.; Mukai, T.; Tanimura, S. 1993: Mechanical properties at high strain rates and microstructures of materials. Zairyo 42(483): 1414-1419

Adachi, J.; Kurosaki, K.; Uno, M.; Yamanaka, S.; Takano, M.; Akabori, M.; Minato, K. 2009: Mechanical properties at sub-microscale and macroscale of polycrystalline uranium mononitride. Journal of Nuclear Materials 384(1): 6-11

Morales, M.; Roa, J.J.; Capdevila, X.G.; Segarra, M.; Pinol, S. 2010: Mechanical properties at the nanometer scale of GDC and YSZ used as electrolytes for solid oxide fuel cells. Acta Materialia 58(7): 2504-2509

Te Nijenhuis, K.; Winter, H.H. 1989: Mechanical properties at ythe gel point of a crystallizing poly(vinyl chloride) solution. Macromolecules 22(1): 411-414

Chan, Y.L.; Wu, S.L.; Liu, X.M.; Chu, P.K.; Yeung, K.W.K.; Lu, W.W.; Ngan, A.H.W.; Luk, K.D.K.; Chan, D.; Cheung, K.M.C. 2007: Mechanical properties, bioactivity and corrosion resistance of oxygen and sodium plasma treated nickel titanium shape memory alloy. Surf. Coat. Technol 202(4-7): 1308-1312

Su, J.F.; Zhen, H.U.A.N.G.; Kai, L.I.U.; Fu, L.L.; Liu, H.R. 2007: Mechanical properties, biodegradation and water vapor permeability of blend films of soy protein isolate and poly(vinyl alcohol) compatibilized by glycerol. Polymer Bulletin (Berlin. Print) 58(5-6): 913-921

Hyong Seo, Y.O.O.N.; Park, B.; Joon Hyong, C.H.O.; Seong Chan, J.U.N. 2013: Mechanical Properties Changes During Electrothermal RF Tuning in a Nanoelectromechanical Resonator. IEEE Transactions on Nanotechnology 12(4): 596-600

Asensiolozano, J.; Pantamesones, J.T.; Cotogonzalez, R. 2007: Mechanical properties characterization of an HR multiphase steel microalloyed with mo-nb-ti and B, subjected to variable annealing cycles - Charakterisierung der mechanischen Eigenschaften von mit Mo-Nb-Ti und B mikrolegiertem HR-Multiphasenstahl nach verschiedenen Anlasszyklen. Praktische Metallographie 44(11): 534-544

Hecht, N.L.; Goodrich, S.M.; Chuck, L.; Mccullum, D.E.; Tennery, V.J. 1992: Mechanical properties characterization of one SiC and two Si3N4 commercially available ceramics. American Ceramic Society Bulletin 71(4): 653-659

Manalo, A.C.; Aravinthan, T.; Karunasena, W. 2013: Mechanical properties characterization of the skin and core of a novel composite sandwich structure. Journal of Composite Materials 47(14): 1785-1800

Fu, J.F.; Chen, L.Y.; Hui, Y.A.N.G.; Zhong, Q.D.; Shi, L.Y.; Wei, D.E.N.G.; Xing, D.O.N.G.; Yi, C.H.E.N.; Zhao, G.Z. 2012: Mechanical Properties, Chemical and Aging Resistance of Natural Rubber Filled with Nano-Al2O3. Polymer Composites 33(3): 404-411

Wang, W.F.; Su, Y.L. 1986: Mechanical properties, corrosion resistance, and high temperature oxidation resistance of sintered duplex stainless steels - Propriétés mécaniques, résistance à la corrosion et résistance à l'oxydation à haute température des aciers inoxydables biphasés frittés. Powder Metallurgy 29(3): 177-182

Popovic, R.S.; Plavsic, M.; Popovic, R.G.; Milosavljevic, M. 1997: Mechanical properties, crosslink density and surface morphology of SBR/silicone rubber blends. Kautschuk und Gummi, Kunststoffe 50(12): 861-867

Nardelli, M.B.; Fattebert, J.L.; Orlikowski, D.; Roland, C.; Zhao, Q.; Bernholc, J. 2000: Mechanical properties, defects and electronic behavior of carbon nanotubes. Carbon (New York) 38(11-12): 1703-1711

Mihai, D.; Bujoreanu, L.G. 2002: Mechanical properties degradation in a Cr-Mo low-alloy steel pipe after prolonged use for gas transport in a power plant station. Revista de Metalurgia (Madrid) 38(6): 464-468

Delobelle, P.; Fribourgblanc, E.; Remiens, D. 2006: Mechanical properties determined by nanoindentation tests of [Pb(Zr,Ti)O3] and [Pb (Mg1/3Nb2/3)1-xTixO3] sputtered thin films. Thin Solid Films 515(4): 1385-1393

Boiko, Y.M.; Prudhomme, R.E. 1999: Mechanical properties developing at the interface of amorphous miscible polymers, below the glass transition temperature : Time-temperature superposition. Journal of Applied Polymer Science 74(4): 825-830

Mollah, M.Z.I.; Khan, M.A. 2012: Mechanical Properties Development of Sodium Alginate Films with Additives by UV-radiation Processing. Journal of Applied Polymer Science 124(1): 275-281

May, J.; Dinkel, M.; Amberger, D.; Hoppel, H.W.; Goken, M. 2007: Mechanical properties, dislocation density and grain structure of ultrafine-grained aluminum and aluminum-magnesium alloys. Metall. Mater. Trans., A Phys. Metall. Mater. Sci 38(9): 1941-1945

Newkirk, J.W.; Thakur, S. 2002: Mechanical properties distributions of PM parts. Powder Metallurgy 45(4): 354-358

Malow, T.R.; Koch, C.C. 1998: Mechanical properties, ductility, and grain size of nanocrystalline iron produced by mechanical attrition. Metall. Mater. Trans., A Phys. Metall. Mater. Sci 29(9): 2285-2295

Hailiang, L.I.; Hejun, L.I.; Jinhua, L.U.; Kezhi, L.I.; Can, S.U.N.; Dongsheng, Z.H.A.N.G. 2012: Mechanical properties enhancement of carbon/carbon composites by in situ grown carbon nanofibers. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 547: 138-141

Laiyu, L.U.; Chekroun, M.; Abraham, O.; Maupin, V.; Villain, G. 2011: Mechanical properties estimation of functionally graded materials using surface waves recorded with a laser interferometer. Ndt and e International 44(2): 169-177

Rodriguez, E.; Alvarez, V.A.; Moran, J.; Moreno, S.; Petrucci, R.; Kenny, J.M.; Vazquez, A. 2006: Mechanical properties evaluation of a recycled flax fiber-reinforced vinyl ester. Journal of Composite Materials 40(3): 245-256

Li, C.L.; Lin, Y.T.; Lee, J.W. 2009: Mechanical properties evaluation of chromized tungsten carbide-cobalt hardmetals. Surf. Coat. Technol 204(6-7): 1106-1111

Trippe, S.C.; Mansano, R.D.; Costa, F.M.; Silva, R.F. 2004: Mechanical properties evaluation of fluor-doped diamond-like carbon coatings by nanoindentation. Thin Solid Films 446(1): 85-90

Baldacim, S.A.; Santos, C.; Silva, O.M.M.; Silva, C.R.M. 2003: Mechanical properties evaluation of hot-pressed Si3N4-SiC(w) composites. International Journal of Refractory Metals and Hard Materials 21(5-6): 233-239

Martinezhernandez, A.L.; Velascosantos, C.; De Icaza, M.; Castano, V.M. 2005: Mechanical properties evaluation of new composites with protein biofibers reinforcing poly(methyl methacrylate). Polymer (Guildford) 46(19): 8233-8238

Pita, V.J.R.R.; Sampaio, E.E.M.; Monteiro, E.E.C. 2002: Mechanical properties evaluation of PVC/plasticizers and PVC/thermoplastic polyurethane blends from extrusion processing. Polymer Testing 21(5): 545-550

Vasconcelos, W.L.; Hench, L.L. 1990: Mechanical properties evolution during sintering of optical sol-gel silica. J. Non-Cryst. Solids 121(1-3): 132-135

Shuguo, C.H.E.N.; Yong, Z.H.A.N.G.; Ruyin, W.A.N.G.; Haiyang, Y.U.; Hoch, M.; Sharon, G.U.O. 2009: Mechanical Properties, Flame Retardancy, Hot-Air Ageing, and Hot-Oil Ageing Resistance of Ethylene-Vinyl Acetate Rubber/Hydrogenated Nitrile-Butadiene Rubber/ Magnesium Hydroxide Composites. Journal of Applied Polymer Science 114(5): 3310-3318

Kaynak, C.; Nakas, G.I.; Isitman, N.A. 2009: Mechanical properties, flammability and char morphology of epoxy resin/ montmorillonite nanocomposites. Applied Clay Science 46(3): 319-324

Fujimoto, J.; Tamura, T.; Todome, K.; Tanimoto, T. 1993: Mechanical properties for CFRP/damping-material laminates. Joint Japan/U.S. Conference on Adaptive Structures 12(7): 738-751

Brinson, H.F.; Grant, J.W. 1986: Mechanical properties for durability predictions of FRP bonded joint. Composite Structures 6(1-3): 107-121

Yokoyama, Y.; Inoue, A.; Masumoto, T. 1993: Mechanical properties, fracture mode and deformation behavior of Al70Pd20Mn10 single-quasicrystal. Materials Transactions - Jim 34(2): 135-145

Truong, V.T.; Truong, Y.B.; Ennis, B.C. 1991: Mechanical properties, fracture toughness and microstructures of a crosslinked epoxy. Polymer Communications (Guildford) 32(9): 275-278

Rattanasom, N.; Prasertsri, S. 2012: Mechanical properties, gas permeability and cut growth behaviour of natural rubber vulcanizates: Influence of clay types and clay/carbon black ratios. Polymer Testing 31(5): 645-653

Yingchun, D.I.N.G.; Min, C.H.E.N.; Wenjuan, W.U. 2014: Mechanical properties, hardness and electronic structures of new post-cotunnite phase (Fe2P-type) of TiO2. Physica. B, Condensed Matter 433: 48-54

Ling, L.I.N.; Cong, D.E.N.G.; Lin, G.P.; Wang, Y.H. 2014: Mechanical Properties, Heat Resistance and Flame Retardancy of Glass Fiber-Reinforced PLA-PC Alloys Based on Aluminum Hypophosphite. Polymer-Plastics Technology and Engineering (Softcover Ed) 53(4-7): 613-625

Nelea, V.; Pelletier, H.; Muller, D.; Broll, N.; Mille, P.; Ristoscu, C.; Mihailescu, I.N. 2002: Mechanical properties improvement of pulsed laser-deposited hydroxyapatite thin films by high energy ion-beam implantation. Appl. Surf. Sci 186(1-4): 483-489

Santos, C.; Strecker, K.; Baldacim, S.A.; Silva, O.M.M.; Da Silva, C.R.M. 2003: Mechanical properties improvement related to the isothermal holding time in Si3N4 ceramics sintered with an alternative additive. International Journal of Refractory Metals and Hard Materials 21(5-6): 245-250

Iwahori, Y.; Ishiwata, S.; Sumizawa, T.; Ishikawa, T. 2005: Mechanical properties improvements in two-phase and three-phase composites using carbon nano-fiber dispersed resin. Composites. Part A, Applied Science and Manufacturing 36(10): 1430-1439

Canales, A.A.; Carrera, E.; Talamantessilva, J.; Valtierra, S.; Colas, R. 2012: Mechanical properties in as-cast and heat treated Al-Si-Cu alloys. International Journal of Microstructure and Materials Properties 7(4): 281-300

Davies, I.J.; Rawlings, R.D. 1999: Mechanical properties in compression of CVI-densified porous carbon/carbon composite. Composites Science and Technology 59(1): 97-104

Davies, I.J.; Rawlings, R.D. 1994: Mechanical properties in compression of low density carbon/carbon composites. Composites 25(3): 229-236

Davies, I.J.; Rawlings, R.D. 1994: Mechanical properties in flexure and tension of low density carbon-carbon composites. Carbon (New York) 32(8): 1449-1456

Jang, B.Z.; Cholakara, M.; Jang, B.P.; Shih, W.K. 1991: Mechanical properties in multidimensional composites. Polymer Engineering and Science 31(1): 40-46

Jen Mh, R.; Tseng, Y.C.; Chang, S.C.; Ming, C.H.E.N. 2006: Mechanical properties in notched AS-4/PEEK APC-2 composite laminates at elevated temperature. Journal of Composite Materials 40(11): 955-969

Malow, T.R.; Koch, C.C. 1998: Mechanical properties in tension of mechanically attrited nanocrystalline iron by the use of the miniaturized disk bend test. Acta Materialia 46(18): 6459-6473

Maschio, S.; Sbaizero, O.; Meriani, S. 1992: Mechanical properties in the ceria-zirconia system. Journal of the European Ceramic Society 9(2): 127-132

Eskin, D.G.; Suyitno,; Katgerman, L. 2004: Mechanical properties in the semi-solid state and hot tearing of aluminium alloys. Progress in Materials Science 49(5): 629-711

Javaid, A.; Davis, K.G.; Sahoo, M. 2000: Mechanical properties in thin-wall ductile iron castings. Modern Casting 90(6): 39-41

Apostolov, A.A.; Fakirov, S.; Mark, J.E. 1998: Mechanical properties in torsion for poly(butylene terephthalate) and a poly(ether ester) based on poly (ethylene glycol) and poly(butylene terephthalate). Journal of Applied Polymer Science 69(3): 495-502

Milman, Y.V.; Chugunova, S.I. 1999: Mechanical properties, indentation and dynamic yield stress of ceramic targets. Int. J. Impact Eng 23(1): 629-638

Chunyan, M.E.N.G.; Di, Z.H.A.N.G.; Cui, H.U.A.; Linzhong, Z.H.U.A.N.G.; Jishan, Z.H.A.N.G. 2014: Mechanical properties, intergranular corrosion behavior and microstructure of Zn modified Al-Mg alloys. Journal of Alloys and Compounds 617: 925-932

Hemmatian, H.; Fereidoon, A.; Rajabpour, M. 2014: Mechanical Properties Investigation of Defected, Twisted, Elliptic, Bended and Hetero-junction Carbon Nanotubes Based on FEM. Fullerenes, Nanotubes, and Carbon Nanostructures 22(6-10): 528-544

Hun Kee, L.E.E.; Seong Hyun, K.O.; Jun Soo, H.A.N.; Park, H. 2008: Mechanical properties measurement of silicon nitride thin films using the bulge test. Proc. Spie Int. Soc. Opt. Eng 6798: 67981C.1-67981C.8

Nilsson, J.O.; Kangas, P.; Karlsson, T.; Wilson, A. 2000: Mechanical properties, microstructural stability and kinetics of σ-phase formation in 29Cr-6Ni-2Mo-0.38N superduplex stainless steel. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science 31(1): 35-45

Guo, J.Q.; Kita, K.; Kazama, N.S.; Nagahora, J.; Ohtera, K. 1995: Mechanical properties, microstructure and crystal structures of Al98-3xCu2xFexCe1Zr1 (x = 1 - 3 at.%) alloys extruded from their atomized powders. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 203(1-2): 420-426

Hooper, R.M.; Shakib, J.I.; Parry, A.; Brookes, C.A. 1989: Mechanical properties, microstructure and wear of DBC50 - Propriétés mécaniques, microstructure et usure du DBC50. Idr. Industrial Diamond Review 49(533): 170-173

Stoenescu, R.; Schaeublin, R.; Gavillet, D.; Baluc, N. 2007: Mechanical properties-microstructure correlation in neutron irradiated heat-affected zones of austenitic stainless steels. J. Nucl. Mater 362(2-3): 287-292

Yakub, I.; Du, J.; Soboyejo, W.O. 2012: Mechanical properties, modeling and design of porous clay ceramics. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 558: 21-29

Fischer, E.W.; Hellmann, G.P.; Spiess, H.W.; Horth, F.J.; Ecarius, U.; Wehrle, M. 1985: Mechanical properties, molecular motions and density fluctuations in polymer-additive mixtures. Macromolecular Chemistry and Physics. Supplement (12): 189-214

Shibata, M.; Teramoto, N.; Inoue, Y. 2007: Mechanical properties, morphologies, and crystallization behavior of plasticized poly(L-lactide)/poly(butylene succinate-co-L-lactate) blends. Polymer (Guildford) 48(9): 2768-2777

Jianjun, C.H.E.N.; Jinyao, C.H.E.N.; Shipeng, Z.H.U.; Ya, C.A.O.; Huilin, L.I. 2011: Mechanical Properties, Morphology, and Crystal Structure of Polypropylene/Chemically Modified Attapulgite Nanocomposites. Journal of Applied Polymer Science 121(2): 899-908

Shibata, M.; Inoue, Y.; Miyoshi, M. 2006: Mechanical properties, morphology, and crystallization behavior of blends of poly(L-lactide) with poly(butylene succinate-co-L-lactate) and poly(butylene succinate). Polymer (Guildford) 47(10): 3557-3564

Shibata, M.; Ozawa, K.; Yosomiya, R. 2002: Mechanical properties, morphology, and crystallization behavior of new thermoplastic polyimide (N-TPI)/poly(ether sulfone) blends. Journal of Applied Polymer Science 83(6): 1366-1374

Hongyan, H.A.N.; Xiaodong, W.A.N.G.; Dezhen, W.U. 2013: Mechanical properties, morphology and crystallization kinetic studies of bio-based thermoplastic composites of poly(butylene succinate) with recycled carbon fiber. Journal of Chemical Technology and Biotechnology (1986) 88(7): 1200-1211

Wang, F.Y.; Ma Cc, M.; Wu, W.J. 1999: Mechanical properties, morphology, and flame retardance of glass fiber-reinforced polyamide-toughened novolac-type phenolic resin. Journal of Applied Polymer Science 73(6): 881-887

Phinyocheep, P.; Saelao, J.; Buzare, J.Y. 2007: Mechanical properties, morphology and molecular characteristics of poly(ethylene terephthalate) toughened by natural rubber. Polymer (Guildford) 48(19): 5702-5712

Larranaga, M.; Serrano, E.; Martin, M.D.; Tercjak, A.; Kortaberria, G.; De la Caba, K.; Cristina Riccardi, C.; Mondragon, I. 2007: Mechanical properties-morphology relationships in nano-/microstructured epoxy matrices modified with PEO-PPO-PEO block copolymers. Polymer International 56(11): 1392-1403

Williams, E.M.; Graham, S.S.; Akers, S.A.; Reed, P.A.; Rushing, T.S. 2009: Mechanical properties of a baseline UHPC with and without steel fibers. Wit Transactions On Engineering Sciences v. 64: 93-104

Shibata, K.; Kadota, T.; Kohno, Y.; Nyilas, A.; Ogata, T. 2000: Mechanical properties of a boron added superalloy at 4K and magnetic effect. Adv. Cryog. Eng 46: 73-80

Lee, J.H.; Kim, D.S.; Lee, Y.H.; Farouk, B. 1996: Mechanical properties of a-C:H and a-C:H/SiOx nanocomposite thin films prepared by ion-assisted plasma-enhanced chemical vapor deposition. Thin Solid Films 280(1-2): 204-210

Jiang, X.; Reichelt, K.; Stritzker, B. 1990: Mechanical properties of a-C:H films prepared by plasma decomposition of C2H2. Journal of Applied Physics 68(3): 1018-1022

Qi, J.; Lai, K.H.; Lee, C.S.; Bello, I.; Lee, S.T.; Luo, J.B.; Wen, S.Z. 2001: Mechanical properties of a-C:H multilayer films. Icndst-7: International Conference on new Diamond Science and Technology 10(9-10): 1833-1838

Pozzi, M.; Hassan, M.; Mehregany, M.; Harris, A.J.; Burdess, J.S.; Liudi, J.I.A.N.G.; Lee, K.K.; Cheung, R.; Phelps, G.J.; Wright, N.G.; Zorman, C.A. 2007: Mechanical properties of a 3C-SiC film between room temperature and 600 °C. Journal of Physics. D, Applied Physics 40(11): 3335-3342

Chengyu, Z.H.A.N.G.; Shengru, Q.I.A.O.; Kefei, Y.A.N.; Yongsheng, L.I.U.; Qi, W.U.; Dong, H.A.N.; Mei, L.I. 2011: Mechanical properties of a carbon fiber reinforced self-healing multilayered matrix composite at elevated temperatures. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 528(7-8): 3073-3078

Dietzel, D.; Marsaudon, S.; Aime, J.P.; Nguyen, C.V.; Couturier, G. 2006: Mechanical properties of a carbon nanotube fixed at a tip apex: A frequency-modulated atomic force microscopy study. Physical Review B. Condensed Matter and Materials Physics 72(3): 035445.1-035445.16

Gravier, S.; Blandin, J.J.; Suery, M. 2010: Mechanical properties of a co-extruded Metallic Glass/Alloy (MeGA) rod- Effect of the metallic glass volume fraction. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 527(16-17): 4197-4201

Lee, R.S.; Blazynski, T.Z. 1984: Mechanical properties of a composite wax model material simulating plastic flow of metals - Propriétés mécaniques d'un modèle en cire composite simulant l'écoulement d'une tôle plastique des métaux. Journal of Mechanical Working Technology 9(3): 301-312

Nagayama, K.; Terasaki, T.; Tanaka, K.; Fischer, F.D.; Antretter, T.; Cailletaud, G.; Azzouz, F. 2001: Mechanical properties of a Cr-Ni-Mo-Al-Ti maraging steel in the process of martensitic transformation. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 308(1-2): 25-37

Martin, J.P.; Kander, R.G. 2003: Mechanical properties of a cryogenically mechanically alloyed polycarbonate-poly(aryl ether ether ketone) system. Journal of Applied Polymer Science 88(5): 1196-1202

Yanzhi, C.A.I.; Shangwu, F.A.N.; Heyi, L.I.U.; Litong, Z.H.A.N.G.; Laifei, C.H.E.N.G.; Juan, J.I.A.N.G.; Benxing, D.O.N.G. 2010: Mechanical properties of a 3D needled C/SiC composite with graphite filler. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 527(3): 539-543

Brothers, A.H.; Dunand, D.C. 2008: Mechanical properties of a density-graded replicated aluminum foam. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 489(1-2): 439-443

Sun, Y.Y.; Song, M.; Liao, X.Z.; He, Y.H. 2011: Mechanical properties of a FeCuSiB alloy with amorphous and/or crystalline structures. Journal of Alloys and Compounds 509(23): 6603-6608

Sakihama, H.; Tokisue, H.; Katoh, K. 2002: Mechanical properties of a friction surfaced 5052 aluminum alloy. Keikinzoku 52(8): 346-351

Kurashige, K.; Kurata, Y.; Ishibashi, H.; Susa, K. 1997: Mechanical properties of a Gd2SiO5 single crystal. Jpn. J. Appl. Phys 36(4A): 2242-2246

Shah Khan, M.Z.; Simpson, G. 2000: Mechanical properties of a glass reinforced plastic naval composite material under increasing compressive strain rates. Materials Letters (General Ed.) 45(3-4): 167-174

Nagasaka, T.; Yoshida, H.; Fukumoto, K.I.; Yamamoto, T.; Matsui, H. 2000: Mechanical properties of a high-purity Fe-9Cr-2W-0.1C model alloy for low-activation ferritic steels for fusion reactors. Mater. Trans. - Jim 41(1): 170-177

Kanou, G.; Harima, N.; Takaki, S.; Abiko, K. 2000: Mechanical properties of a high-purity 60 mass % Cr-Fe alloy. Mater. Trans. - Jim 41(1): 197-202

Li, J.C.; Zhao, Z.K.; Jiang, Q. 2003: Mechanical properties of a high-strength Al90Mn8Ce2 alloy. Advanced Engineering Materials 5(3): 119-122

Grylls, R.J. 1997: Mechanical properties of a high-strength cupronickel alloy-Bayesian neural network analysis. Icsma 11: International Conference on the Strength of Materials 234-236: 267-270

Xin, D.E.N.G.; Patterson, B.R.; Chawla, K.K.; Koopman, M.C.; Fang, Z.; Lockwood, G.; Griffo, A. 2001: Mechanical properties of a hybrid cemented carbide composite. Icshm 7: International Conference on the Science of Hard Materials 19(4-6): 547-552

Ishii, H.; Ohkubo, K.; Miura, S.; Mohri, T. 2003: Mechanical properties of a + K two-phase lamellar structure in Fe-Mn-Al-C alloy. Materials Transactions - Jim 44(9): 1679-1681

Ohmori, M.; Fukuda, I.; Fujita, M. 1986: Mechanical properties of a low carbon steel shock-loaded by an explosive - Propriétés mécaniques d'acier à bas carbone ayant subi une onde de choc par explosifs. Bulletin of the Jsme 29(251): 1419-1426

Shin, C.S.; Wang, J.B. 1998: Mechanical properties of a low-temperature-cured ceramic matrix composite. Materials Chemistry and Physics 55(2): 94-101

Perez, P.; Garces, G.; Adeva, P. 2004: Mechanical properties of a Mg-10 (vol.%)Ti composite. Composites Science and Technology 64(1): 145-151

Nakao, S.; Ando, T.; Shikida, M.; Sato, K. 2006: Mechanical properties of a micron-sized SCS film in a high-temperature environment. Journal of Micromechanics and Microengineering 16(4): 715-720

Shiflet, G.J.; He, Y.; Poon, S.J. 1988: Mechanical properties of a new class of metallic glasses based on aluminum. Journal of Applied Physics 64(12): 6863-6865

Heping, Z.H.A.O.; Zhengyou, L.I.U.; Youyan, L.I.U. 2000: Mechanical properties of a new electrorheological fluid. Solid State Communications 116(6): 321-325

Kawashima, A.; Yuqiao, Z.E.N.G.; Fukuhara, M.; Kurishita, H.; Nishiyama, N.; Miki, H.; Inoue, A. 2008: Mechanical properties of a Ni60Pd20P17B3 bulk glassy alloy at cryogenic temperatures. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 498(1-2): 475-481

Kondoh, J.; Tateishi, H.; Umeda, M.; Arai, K.; Agatsuma, K.; Gotoh, K.; Saitoh, T. 2001: Mechanical properties of a niobium-tin superconductor reinforced by tantalum cores. Ieee Trans. Appl. Supercond 11(1): 3635-3638

Cortes, D.A.; Hogg, P.J.; Tanner, K.E.; Escobedo, J.C. 2002: Mechanical properties of a novel bioactive ceramic system. Archives of Metallurgy 47(4): 409-419

Hardy, D.; Green, D.J. 1995: Mechanical properties of a partially sintered alumina. Journal of the European Ceramic Society 15(8): 769-775

Broussous, L.; Berthout, G.; Rebiscoul, D.; Rouessac, V.; Ayral, A. 2010: Mechanical properties of a plasma-modified porous low-k material. Microelectron. Eng 87(3): 466-469

De Loor, A.; Cassagnau, P.; Michel, A.; Vergnes, B. 1997: Mechanical properties of a polymer blend obtained through in situ crosslinking of the dispersed phase. Journal of Applied Polymer Science 63(10): 1385-1390

Sugimura, A.; Asai, M.; Matsunaga, T.; Akagi, Y.; Sakai, T.; Noguchi, H.; Shibayama, M. 2013: Mechanical properties of a polymer network of Tetra-PEG gel. Polymer Journal 45(3): 300-306