Natural frequencies of square plates with reinforced central holes subjected to inplane loads
Sabir, A.B.; Davies, G.T.
International Conference on Thin-Walled Structures 28(3-4): 337-353
1997
ISSN/ISBN: 0263-8231 Accession: 076778658
Full Text Article emailed within 1 workday: $29.90
Related References
Sabir, A.B.; Davies, G.T. 1997: Natural frequencies of plates with square holes when subjected to in-plane uniaxial, biaxial or shear loading International Conference on Thin-Walled Structures 28(3-4): 321-335Wang, C.; Chen, Y.; Xiang, Y. 2004: Plastic buckling of rectangular plates subjected to intermediate and end inplane loads International Journal of Solids and Structures 41(16-17): 4279-4297
Durelli, A.J.; Erickson, M.; Rajaiah, K. 1981: Optimum shapes of central holes in square plates subjected to uniaxial uniform load International Journal of Solids and Structures 17(8): 787-793
Hu, H.T.; Tzeng, W.L. 2000: Buckling analysis of skew laminate plates subjected to uniaxial inplane loads Thin-Walled Structures 38(1): 53-77
Prabhakara, D.L.; Datta, P.K. 1996: Static and dynamic elastic behaviour of damaged plates subjected to local inplane loads Marine Structures 9(8): 811-818
Ghoneim, M.G.; Macgregor, J.G. 1994: Prediction of the ultimate strength of reinforced concrete plates under combined inplane and lateral loads Aci Structural Journal 91(6): 688-696
Nurick, G.N.; Shave, G.C. 1996: The deformation and tearing of thin square plates subjected to impulsive loads : an experimental study International Journal of Impact Engineering 18(1): 99-116
Vivek, K.; Sreedhar Babu, T.; Sai Ram, K. 2020: Buckling analysis of functionally graded thin square plates with triangular cut-out subjected to uni-axial loads Materials Today: Proceedings 24: 662-672
Fialko, S.Y.U. 1991: Load-capacity of flawed reinforced rectangular plates subjected to compressive end loads Soviet Applied Mechanics 27(2): 177-183
Xu, G.; Huang, H.; Chen, B.; Chen, F. 2017: Buckling and postbuckling of elastoplastic FGM plates under inplane loads Composite Structures 176: 225-233
Durelli, A.J.; Barriage, J. 1955: Stress Distribution in Square Plates with Hydrostatically Loaded Central Circular Holes Journal of Applied Mechanics 22(4): 539-544
Chaudhuri, R.A.; Seide, P. 1986: Triangular element for analysis of perforated plates under inplane and transverse loads Computers and Structures 24(1): 87-95
Ganesan, N.; Nagaraja Rao, S. 1985: Influence of location of cut-outs on natural frequencies of thin square plates Journal of Sound and Vibration 101(4): 598-600
Rajaiah, K.; Naik, N.K. 1983: Optimum quasi-rectangular holes in infinite orthotropic plates under inplane loading Journal of Applied Mechanics 50(4A): 891-892
Sarat Kumar, P.A.N.D.A.; Ramachandra, L.S. 2010: Buckling of rectangular plates with various boundary conditions loaded by non-uniform inplane loads International Journal of Mechanical Sciences 52(6): 819-828
Bilik, C.; Rammerstorfer, F G.; Figala, G.; Buchmayr, B. 2011: Computational modelling of laser treatment of plates for increased buckling loads and natural frequencies Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 225(10): 2385-2398
Bassily, S.; Dickinson, S. 1972: Buckling and lateral vibration of rectangular plates subject to inplane loads-a Ritz approach Journal of Sound and Vibration 24(2): 219-239
Bambill, D.V.; Felix, D.H.; Rossit, C.A. 2006: Natural frequencies of thin, rectangular plates with holes or orthotropic patches carrying an elastically mounted mass International Journal of Solids and Structures 43(14-15): 4116-4135
Mirzaeifar, R.; Shahab, S.; Bahai, H. 2009: An approximate method for simultaneous modification of natural frequencies and buckling loads of thin rectangular isotropic plates Engineering Structures 31(1): 208-215
Laura, P.A.A.; Ficcadenti, G.M.; Alvarez, S.I. 1988: Effect of geometric boundary perturbations on the natural frequencies and buckling loads of vibrating clamped circular plates Journal of Sound and Vibration 126(1): 67-72