Numerical modeling of bed-to-wall heat transfer in a circulating fluidized bed combustor based on cluster energy balance
Gnanapragasam, N.V.; Reddy, B.V.
International Journal of Heat and Mass Transfer 51(21-22): 5260-5268
2008
ISSN/ISBN: 0017-9310 Accession: 076897253
PDF emailed within 1 workday: $29.90
Related References
Gnanapragasam, N.V.; Reddy, B.V. 2009: Numerical modeling of axial bed-to-wall heat transfer in a circulating fluidized bed combustor International Journal of Heat and Mass Transfer 52(7-8): 1657-1666Golriz, M.R. 1996: Suspension-to-wall heat transfer in a 12-MWth circulating fluidized-bed combustor International Journal of Energy Research 20(7): 569-579
Luan, W.; Bowen, B.D.; Lim, C.J.; Brereton, C.M.H.; Grace, J.R. 2000: Suspension-to-membrane-wall heat transfer in a circulating fluidized bed combustor International Journal of Heat and Mass Transfer 43(7): 1173-1185
Nirmal Vijay, G.; Reddy, B.V. 2005: Effect of dilute and dense phase operating conditions on bed-to-wall heat transfer mechanism in a circulating fluidized bed combustor International Journal of Heat and Mass Transfer 48(16): 3276-3283
Seo, M.W.; Suh, Y.H.; Kim, S.D.; Park, S.; Lee, D.H.; Song, B.H. 2011: Cluster and Bed-to-wall Heat Transfer Characteristics in a Dual Circulating Fluidized Bed Industrial-Engineering Chemistry Research 51(4): 2048-2061
Myung Won, S.E.E.; Young Ho, S.U.H.; Sang Done, K.I.M.; Park, S.; Dong Hyun, L.E.E.; Byung Ho, S.O.N.G. 2012: Cluster and Bed-to-wall Heat Transfer Characteristics in a Dual Circulating Fluidized Bed Industrial and Engineering Chemistry Research 51(4): 2048-2061
Wang Shuyan; Yin Lijie; Lu Huilin; Yu Long; Jacques Bouillard; Hao Zhenhua 2009: Numerical analysis of interphase heat and mass transfer of cluster in a circulating fluidized bed Powder Technology 189(1): 87-96
Bubenchikov, A.M.; Starchenko, A.V.; Stropus, V.V. 1993: Numerical modeling of aerodynamics and heat-and-mass transfer in the furnace of a steam boiler with a circulating fluidized bed Thermal Engineering 40(9): 680-684
Jaroslaw Krzywanski; Tomasz Czakiert; Waldemar Muskala; Robert Sekret; Wojciech Nowak 2010: Modeling of solid fuel combustion in oxygen-enriched atmosphere in circulating fluidized bed boiler: Part 2. Numerical simulations of heat transfer and gaseous pollutant emissions associated with coal combustion in O2/CO2 and O2/N2 atmospheres enriched with oxygen under circulating fluidized bed conditions Fuel Processing Technology 91(3): 364-368
Ziegelhoeffer A.; De Jong J.W.; Ferrari R.; Turi Nagy L. 1989: Suspension-to-Surface heat transfer in a circulating-fluidized-bed combustor Aiche Journal 35(10): 1685-1691
Gui Young Han; Yong Jun Cho 1999: Radiative heat transfer in a circulating fluidized bed coal combustor Powder Technology 102(3): 266-273
Nag, P.K.; Sallam Ali, M.; Reddy, B.V. 1993: Heat transfer in a circulating fluidized bed combustor burning indane gas Indian Journal of Technology 31(1): 9-12
Wanchan, W.; Khongprom, P.; Limtrakul, S. 2020: Study of wall-to-bed heat transfer in circulating fluidized bed riser based on CFD simulation Chemical Engineering Research and Design 156: 442-455
Abdelmotalib, H.M.; Ko, D.G.; Im, I. 2016: A study on wall-to-bed heat transfer in a conical fluidized bed combustor Applied Thermal Engineering 99: 928-937
Yumin, C.H.A.N.G.; Yufu, L.O.; Mayyenn, C.H.E.N. 1990: Heat transfer measurements of a 1.0 ton-steam/HR circulating fluidized-bed combustor burning Taiwan coals Particulate Science and Technology 8(3-4): 199-208
Jin Hee Jeon; Sang Done Kim; Seung Jae Kim; Yong Kang 2008: Combustion and heat transfer characteristics in a square internally circulating fluidized bed combustor with draft tube Fuel 87(17-18): 3710-3713
Winaya, N.S.; Basu, P.; Reddy, B.V. 2003: Experimental investigations on heat transfer from suspension to impact separators in the riser column of a circulating fluidized bed combustor International Journal of Heat and Mass Transfer 46(1): 71-75
Cho, Y.J.; Kim, S.D.; Han, G.Y. 1996: Bed-to-wall heat transfer characteristics in a circulating fluidized bed Korean Journal of Chemical Engineering 13(6): 627-632
Daming, S.H.I.; Nicolai, R.; Reh, L. 1998: Wall-to-bed heat transfer in circulating fluidized beds Chemical Engineering and Processing 37(4): 287-293
Fox, W.B.; Grewal, N.S.; Moen, D.A. 1999: Wall-to-bed heat transfer in circulating fluidized beds International Communications in Heat and Mass Transfer 26(4): 499-508