Relationship of elastic limit and proof stress of weld metal to its alloying element contents - Relation entre la limite d'élasticité et la limite d'élasticité proportionnelle du métal fondu et sa teneur en éléments d'alliage
Kasatkin, O.G.
Automatic Welding 37(8): 15-17
1984
ISSN/ISBN: 0005-108X
Accession: 077580834
PDF emailed within 1 workday: $29.90
Related References
Worswick, M.J.; Pick, R.J. 1985: Influence of weld misalignment and weld metal overmatch on the prediction of fracture in pipeline girth welds - Influence de la dénivellation des bords et de la présence d'une soudure à limite d'élasticité excédant celle du métal de base sur la rupture de soudures circonférentielles de pipelines International Journal of Pressure Vessels and Piping 21(3): 209-234Jones, R.H.; Lavender, C.A.; Smith, M.T. 1987: Yield strength-fracture toughness relationships in metal matrix composites - Relation entre la ténacité et la limite d'élasticité dans les composites à matrice métallique Scripta Metallurgica 21(11): 1565-1570
Furukawa, M.; Miura, Y.; Nemoto, M. 1986: Les relations de dépendance entre la température, la vitesse de déformation et la limite d'élasticité d'un alliage Al-Li-Cu-Mg-Zr - The temperature and strain rate dependences of yield stress of an Al-Li-Cu-Mg-Zr alloy Nippon Kinzoku Gakkaishi (1952) 50(11): 961-968
Novozhilov, N.M.; Tkachenko Yu, S.; Kharlamov, I.P.; Smirnov, K.V. 1982: Possibilities of increasing the accuracy of determination of the content of microalloying elements in the metal using specimens of weld metal of varying composition - Détermination plus précise de la teneur en microéléments d'alliage à l'aide d'échantillons de métal fondu de composition variable Welding Production 29(10): 30-32
De Palma, C.; Sucato, E. 1986: Una teoria sugli stati limite di elasticitā. Formulazione di un nuovo criterio di sicurezza - Théorie sur les états limites d'élasticité. Formulation d'un nouveau critère d'élasticité - A theory on the limit states of elasticity. A new safety factor Industria Delle Costruzioni 20(182): 53-63
Volkov, A.S.; Ermolov, I.N.; Basatskaya, L.V.; Vyatskov, I.A.; Grebennik, V.S. 1984: Passage des ondes d'ultra-sons à travers la limite du métal fondu austénitique de la soudure - Transmission of ultrasonic waves through melted austenitic metal of weld Defektoskopia (2): 73-77
Furukawa, M.; Miura, Y.; Nemoto, M. 1985: The effect of temperature on the yield stress of Al-Li alloy - Effet de la température sur la limite d'élasticité de l'alliage Al-Li Transactions of the Japan Institute of Metals 26(6): 414-422
Belyaev, V.N. 1983: Effects of the oxygen contents of CO2+O2 mixtures on some of the particulars of the weld metal - Influence de la teneur en oxygène des mélanges CO2+O2 sur certaines caractéristiques du métal fondu Automatic Welding 36(5): 37-39
Detrez, P. 1984: Variation de la limite d'élasticité et de la résistance à la traction de l'acier moulé au carbone en fonction de l'épaisseur - Change in both the elastic limit and tensile strength of cast steel in terms of the thickness Hommes et Fonderie (149): 21-23
Furukawa, M.; Miura, Y.; Nemoto, M. 1987: Temperature and strain rate dependences of yield stress of an Al-Li-Cu-Mg-Zr alloy - Dépendances de la limite d'élasticité avec la température et la vitesse de déformation d'un alliage Al-Li-Cu-Mg-Zr Transactions of the Japan Institute of Metals 28(8): 655-665
Indacochea, J.E.; Olson, D.L. 1984: Relationship of weld-metal microstructure and penetration to weld-metal oxygen content - Relations entre la microstructure métal-soudure et la teneur en oxygène pénétré Journal of Materials for Energy Systems 5(3): 139-148
Agbossou, A. 1991: Composites epoxy-bois : analyse de l'influence de la matrice sur le comportement élastique et sur la limite d'élasticité - Epoxy-wood composites: analysis of the matrix influence on the elastic behavior and the elastic limit Composites (Paris) 32(1): 18-24
Nojima, T. 1986: Dépendance entre vitesse de déformation et limite d'élasticité inférieure pour les aciers au carbone courants - Strain rate dependence of lower yield stress for plain carbon steels Zairyo 35(397): 1118-1124
Statonbevan, A.E. 1983: The orientation and temperature dependence of the 0.2% proof stress of single crystal Ni3(Al, Ti) - Variation avec l'orientation et la température de la limite d'élasticité à 0,2% de Ni3(Al, Ti) monocristallin Scripta Metallurgica 17(2): 209-214
Kikuta, Y.; Araki, T.; Yoneda, M. 1987: Relationship between microstructure and thoughness in weld metal and its reheated zone of high strength steel - Relation entre la microstructure et la dureté dans le métal fondu par soudage et sa zone rechauffée pour un acier de grande résistance Technology Reports of the Osaka University 37(1865-1888): 75-83