Section 78

EurekaMag Full Text Articles Chapter 77,789


Saboonchi, A.; Hassanpour, S. 2008: Simulation of Cold Rolled Steel Coil Heating during Batch Annealing Process. Heat Transfer Engineering 29(10): 893-901
Aanestad, A. 1986: Simulation of cold rolling - Simulation du laminage à froid. Materials Science and Technology 2(6): 620-624
Shimura, T.; Sakai, M.; Kato, M.; Izumi, S.; Hattori, R.; Sonoda, T.; Takamiya, S. 1996: Simulation of collector current distribution in heterojunction bipolar transistors using newly propsed empirical expression. Jpn. J. Appl. Phys 35(2A): 574-577
Zhou, L.I.N.; Cale, T.S. 1995: Simulation of collilmated flux distributions during physical vapor deposition. International Conference on Metallurgical Coatings and Thin Films Icmctf 95 270(1-2): 627-631
Sakai, J.I.; Tsuchimoto, K.; Sokolov, I.V. 2006: Simulation of collision of two current loops in the upper chromosphere using the two-fluid model. The Astrophysical Journal 642(2): 1236-1245
Loveall, D.; Hamley, M.B.; Miller, B.J.; Bartschat, K. 2000: Simulation of collisionally excited atomic states. Computer Physics Communications 124(1): 90-103
Pritchett, P.L. 1993: Simulation of collisionless electrostatic velocity-shear-driven instabilities. Physics of Fluids. B, Plasma Physics 5(10): 3770-3778
Brandt, L.J.; Katz, H.J.; Wolf, E.L.; Mitsudo, S.; Boley, S.J. 1985: Simulation of colonic carcinoma by ischemia. Gastroenterology (New York, Ny 1943) 88(5): 1137-1142
Ongiro, A.O.; Ugursal, V.I.; Am Taweel, A.M.; Blamire, D.K. 1995: Simulation of combined cycle power plants using the ASPEN PLUS shell. Heat Recovery Syst. Chp 15(2): 105-113
Matsevityy Yu, M.; Malyarenkov, V.A.; Lotsman, T.V.; Braginskiy, A.M. 1984: Simulation of combined heat transfer in the hot-blast valve of a blast-furnace air preheater. Heat Transfer. Soviet Research 16(1): 28-35
Saeed, H.M.; Vestroni, F. 1998: Simulation of combined systems by periodic structures : The wave transfer matrix approach. Journal of Sound and Vibration 213(1): 55-73
Liu, Z.; Karim, G.A. 1997: Simulation of combustion processes in gas-fuelled diesel engines. Proceedings of the Institution of Mechanical Engineers. Part A. Journal of Power and Energy 211(2): 159-169
Colangeli, L.; Bussoletti, E.; Papoular, R.; Mennella, V. 1990: Simulation of cometary infrared spectra using laboratory extinction data of carbonaceous materials. Icarus (N.Y. Ny) 86(1): 198-207
Bolyard, D.W.; Neuber, A.A.; Krile, J.T.; Kristiansen, M. 2010: Simulation of Compact Explosively Driven Ferroelectric Generators. IEEE Transactions on Plasma Science 38(4): 1008-1014
Ishizawa, T. 1986: Simulation of compact groups of galaxies. Astrophysics and Space Science 119(1): 221-225
Blasier, R.B.; Pape, J.M. 1991: Simulation of compartment syndrome by rupture of the deep femoral artery from blunt trauma. Clinical Orthopaedics and Related Research (266): 214-217
Yang, J.B.; Yamashita, T.; Sano, N.; Enomoto, M. 2008: Simulation of competitive Cu precipitation in steel during non-isothermal aging. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 487(1-2): 128-136
Keh, H.C.; Lin, J.C. 1999: Simulation of complete binary tree structures in a faulty Flexible Hypercube. Journal of Scientific Computing 14(3): 245-258
Pichler, C.M.; Plasun, R.; Strasser, R.; Selberherr, S. 1999: Simulation of complete VLSI fabrication processes with heterogeneous simulation tools. Ieee Trans. Semicond. Manuf 12(1): 76-86
Papadopoulou, M.P.; Varouchakis, E.A.; Karatzas, G.P. 2009: Simulation of complex aquifer behavior using numerical and geostatistical methodologies. Desalination (Amst.) 237(1-3): 42-53
Savchenko, V.I. 1993: Simulation of complex changes of the period of autooscillations of the rate of CO oxidation on Pt(110). Kinetics and Catalysis 34(2): 330-334
Kuzmin, A.M.; Okunev, V.S. 1998: Simulation of complex dynamic (emergency) processes during comprehensive optimization of safe fast reactors. Atomic Energy (New York, N.Y.) 84(6): 378-382
Villa, C.M.; Chapman, T.W. 1995: Simulation of complex electrochemical reaction systems. Industrial and Engineering Chemistry Research 34(10): 3445-3453
Noels, L.; Stainier, L.; Ponthot, J.P. 2005: Simulation of complex impact problems with implicit time algorithms : Application to a turbo-engine blade loss problem. Isie/5: International Symposium on Impact Engineering 32(1-4): 358-386
Elsadi, H.; Esmail, N. 2005: Simulation of complex liquids in micropump. Emn 04 European Micro and Nano Systems 36(7): 657-666
Black, J.J.; Mejabi, O.O. 1995: Simulation of complex manufacturing equipment reliability using object oriented methods. Reliability Engineering and Systems Safety 48(1): 11-18
Matkovskaya, T.A.; Nikolaeva, L.S.; Mezhonova, E.A.; Evseev, A.M.; Dyatlova, N.M. 1988: Simulation of complexation of the 3-dimethylamino-1-oxypropylidenebisphosphonic acid in hydrosaline medium - Simulation de complexation de l'acide amino-3-diméthyl-1-oxypropylidènebisphosphonique dans les milieux hydrosalins. Zurnal Neorganiceskoj Himii 33(10): 2471-2474
Klos, J.S.; Sommer, J.U. 2012: Simulation of Complexes between a Charged Dendrimer and a Linear Polyelectrolyte with Finite Rigidity. Macromolecular Theory and Simulations 21(7): 448-460
Khan, M.B. 1993: Simulation of composite propellant aging. Polymer-Plastics Technology and Engineering (Softcover Ed) 32(5): 467-489
Zhvavyi, S.P.; Zykov, G.L. 2008: Simulation of composition modification in ZnSe by nanosecond radiation of excimer laser. Applied Surface Science 254(20): 6504-6508
Hashmi, S.A.R.; Dwivedi, U.K. 2006: Simulation of compositional profile in functionally graded materials. Polymer Engineering and Science 46(11): 1660-1666
Holdich, R. 1994: Simulation of compressible cake filtration. Filtration and Separation 31(8): 825-829
Murshed, H.O.S.S.A.I.N.; Mullan, D.J. 1993: Simulation of compressible convection : a comparative study of boundary conditions. The Astrophysical Journal 416(2): 733-751
Pence, D.V.; Boeschoten, P.A.; Liburdy, J.A. 2003: Simulation of compressible micro-scale jet impingement heat transfer. Journal of Heat Transfer 125(3): 447-453
Chingchih, L.E.E.; Folgar, F.; Tucker, C.L. 1984: Simulation of compression molding for fiber-reinforced thermosetting polymers. Journal of Engineering for Industry 106(2): 114-125
Lin, C.M.; Weng, C.I. 1999: Simulation of compression molding for sheet molding compound considering the anisotropic effect. Polymer Composites 20(1): 98-113
Ducloux, R.; Vincent, M.; Agassant, J.F.; Poitou, A. 1992: Simulation of compression molding of long-glass-fiber-reinforced thermoplastic sheets. Polymer Composites 13(1): 30-37
Pham, X.T.; Trochu, F. 1999: Simulation of Compression Resin transfer molding to manufacture thin composite shells. Polymer Composites 20(3): 436-459
Pham, X.T.; Trochu, F.; Gauvin, R. 1998: Simulation of compression resin transfer molding with displacement control. Journal of Reinforced Plastics and Composites 17(17): 1525-1556
Tabakoff, W.; Lakshminarasimha, A.N.; Pasin, M. 1990: Simulation of compressor performance deterioration due to erosion. J. Turbomach 112(1): 78-83
Venturini, M. 2006: Simulation of compressor transient behavior through recurrent neural network models. Journal of Turbomachinery 128(3): 444-454
Sztwiertnia, K. 1996: Simulation of compromise textures. Archives of Metallurgy 41(1): 101-115
Sakai, N. 1987: Simulation of Compton double scatterings of circularly polarized γ-rays by magnetic electrons - Simulation des diffusions doubles de Compton des rayons γ polarisés circulairement, par les électrons magnétiques. Journal of the Physical Society of Japan 56(7): 2477-2485
Yeo, K.; Maxey, M.R. 2010: Simulation of concentrated suspensions using the force-coupling method. Journal of Computational Physics 229(6): 2401-2421
Hirz, R.; Rizzi, A.M. 1991: Simulation of concentration changes in complex volatile mixtures during evaporation by using gas chromatography. Chromatographia (Wiesbaden) 31(5-6): 224-232
Cifra, P.; Bleha, T.; Romanov, A. 1988: Simulation of concentration dependence of the partition coefficient for macromolecules in porous media. die Makromolekulare Chemie. Rapid Communications 9(5): 355-359
Brucher, W.; Kerschgens, M. 2001: Simulation of concentration statistics with an eulerian model - relevance of several factors to quality of results. Mettools Conference 10(4): 247-252
Soloveva, E.A.; Matorin, S.I. 1989: Simulation of conceptual knowledges: approach by a bionics system. Naucno-Tehniceskaa Informacia - Vsesouznyj Institut Naucnoj i Tehniceskoj Informacii. Seria 2. Informacionnye Processy i Sistemy (3): 2-8
Zayed, T.M.; Halpin, D. 2001: Simulation of concrete batch plant production. Journal of Construction Engineering and Management 127(2): 132-141
Lashkarbolouk, H.; Halabian, A.M.; Chamani, M.R. 2014: Simulation of concrete flow in V-funnel test and the proper range of viscosity and yield stress for SCC. Materials and Structures 47(10): 1729-1743
Hokuno, M.; Meguro, K. 1993: Simulation of concrete-frame collapse due to dynamic loading. Journal of Engineering Mechanics 119(9): 1709-1723
Yeh, I.C. 2009: Simulation of concrete slump using neural networks. Proceedings of the Institution of Civil Engineers. Construction Materials 162(1): 11-18
Kosuge, H.; Mamyoda, T.; Asano, K. 1993: Simulation of condensation of binary vapor mixture on a vertical flat plate. Journal of Chemical Engineering of Japan 26(3): 315-317
Fuller, R.J.; Luther, M.B. 2003: Simulation of condensation problems in a roller-skating centre. Building Research and Information 31(1): 48-59
Delyon, B.; Ying, H.U. 2006: Simulation of conditioned diffusion and application to parameter estimation. Stochastic Processes and their Applications 116(11): 1660-1675
Neu, R.W.; Huseyin, S.E.H.I.T.O.G.L.U. 1994: Simulation of cone bore growth in bearings with a three-ring model. Journal of Applied Mechanics 61(3): 589-595
Egorov, I.V.; Ivanov, D.V. 1997: Simulation of confined separated flows in chemical nonequilibrium. Computational Mathematics and Mathematical Physics 37(6): 731-738
Brovchenko, I.V.; Geiger, A.; Paschek, D. 2001: Simulation of confined water in equilibrium with a bulk reservoir. Fluid Phase Equilib 183-84: 331-339
Weili, C.U.I.; Fanbing, L.I.; Allinger, N.L. 1993: Simulation of conformational dynamics with the MM3 force field : the pseudorotation of cyclopentane. Journal of the American Chemical Society 115(7): 2943-2951
Ogasawara, T.; Akizuki, T.; Takanishi, Y.; Ishikawa, K.; Takezoe, H. 2001: Simulation of conoscopic figures using 4 X 4 matrix method. Molecular Crystals and Liquid Crystals Science and Technology. Section A, Molecular Crystals and Liquid Crystals 362: 255-267
Weclaw, P.; Hudson, R.J. 2004: Simulation of conservation and management of woodland caribou. Ecological Modelling 177(1-2): 75-94
Luo, G.M.; Lee, Y.J. 2009: Simulation of constrained layered damped laminated plates subjected to low-velocity impact using a quasi-static method. Composite Structures 88(2): 290-295
Popov, V.; Ahmed, S.; Idris Qureshi, M. 2008: Simulation of constructed wetland performance using the advection diffusion equation. Transactions On Ecology And The Environment v. 109: 363-371
Cervera, M.; Oliver, J.; Prato, T. 2000: Simulation of construction of RCC dams I. Temperature and aging. II. Stress and damage - Simulation de la construction des barrages en béton compacté. I. Température et maturation. II. Contraintes et endommagement. Journal of Structural Engineering 126(9): 1053-1069
Bush, M.B. 1999: Simulation of contact-induced fracture. Engineering Analysis with Boundary Elements 23(1): 59-66
Heitsch, M.; Baraldi, D.; Wilkening, H. 2010: Simulation of containment jet flows including condensation. Nucl. Eng. Des 240(9): 2176-2184
Galitskaya, I.; Pozdniakova, I.; Toms, L. 2011: Simulation of contaminant transport for contamination risk assessment. Iahs-Aish Publ 341: 172-178
Fomin, S.; Chugunov, V.; Hashida, T. 2007: Simulation of contaminant transport in a fractured porous aquifer. Journal of Fluids Engineering 129(9): 1157-1163
Terrell, E.; Higgs, C.F. 2007: Simulation of contaminates around the solid immersion lens in a near-field optical recording system. IEEE Transactions on Magnetics 43(3): 1086-1092
Dahlblom, P. 1992: Simulation of contamined groundwater migration in fractured rock by a laminar pipe-flow model - Simulation de la migration d'une eau souterraine polluée dans une roche fracturée au moyen d'un modèle d'écoulement laminaire dans des tubes. Journal of Hydraulic Research 30(5): 657-672
Cakal, G.O.; Eroglu, I.; Ozkar, S. 2007: Simulation of continuous boric acid slurry reactors in series by microfluid and macrofluid models. Journal of Crystal Growth 306(1): 240-247
Ardelean, E.; Ardelean, M.; Socalici, A.; Heput, T. 2007: Simulation of continuous cast steel product solidification - Simulación de la solidificación de los semiproductos de acero, fundidos continuamente. Revista de Metalurgia (Madrid) 43(3): 181-187
Hitch, D.M.; Rousseau, R.W.; Ferrell, J.K. 1986: Simulation of continuous-contact separation processes: multicomponent, adiabatic absorption. Industrial and Engineering Chemistry. Process Design and Development 25(3): 699-705
Hitch, D.M.; Rousseau, R.W. 1988: Simulation of continuous-contact separation processes: multicomponent batch distillation. Industrial and Engineering Chemistry Research 27(8): 1466-1473
Hitch, D.M.; Rousseau, R.W.; Ferrell, J.K. 1987: Simulation of continuous-contact separation processes: unsteady-state, multicomponent, adiabatic absorption. Industrial and Engineering Chemistry Research 26(6): 1092-1099
Yamada, T.; Imamura, Y. 1989: Simulation of continuous direct esterification process between terephthalic acid and ethylene glycol. Polymer-Plastics Technology and Engineering (Softcover Ed) 28(7-8): 811-876
Soulat, D.; Cheruet, A.; Boisse, P. 2006: Simulation of continuous fibre reinforced thermoplastic forming using a shell finite element with transverse stress. Computers and Structures 84(13-14): 888-903
Chang, Y.A.; Seader, J.D. 1988: Simulation of continuous reactive distillation by a homotopy-continuation method. Computers and Chemical Engineering 12(12): 1243-1255
Zhen Yao, K.; Mcauley, K.B.; Marchildon, E.K. 2003: Simulation of continuous solid-phase polymerization of nylon 6,6. III. Simplified model. Journal of Applied Polymer Science 89(14): 3701-3712
Bhattacharjee, C.; Datta, S. 2003: Simulation of continuous stirred ultrafiltration process: an approach based on analytical solution coupled with turbulent back transport. Journal of Chemical Technology and Biotechnology (1986) 78(11): 1135-1141
Terreros, I.; Iordanoff, I.; Charles, J.L. 2013: Simulation of continuum heat conduction using DEM domains. Computational Materials Science 69: 46-52
Hartwig, J.; Jackel, K.H.; Lerche, V. 1987: Simulation of contrasts in X-ray plane wave topographs of quartz crystals with induced growth striations. Crystal Research and Technology (1979) 22(7): 951-959
Navratil, P.; Balate, J. 2011: Simulation of Control of Multi-Variable Control Loop: Steam Turbine. International Journal of Simulation Modelling 10(2): 53-65
Domaneschi, M. 2012: Simulation of controlled hysteresis by the semi-active Bouc-Wen model. Computers and Structures 106-107: 245-257
Tibken, B.; Hofer, E.P. 1995: Simulation of controlled uncertain nonlinear systems. Appl. Math. Comput 70(2-3): 329-338
Gu, J.P.; Beckermann, C. 1999: Simulation of convection and macrosegregation in a large steel ingot. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science 30(5): 1357-1366
Diepers, H.J.; Beckermann, C.; Steinbach, I. 1999: Simulation of convection and ripening in a binary alloy mush using the phase-field method. Acta Materialia 47(13): 3663-3678
Robinson, T.R. 1993: Simulation of convection flow estimation errors in VHF bistatic auroral radar systems. Annales Geophysicae (1988) 11(11-12): 1033-1050
Sanga, E.C.M.; Mujumdar, A.S.; Raghavan, G.S.V. 2002: Simulation of convection-microwave drying for a shrinking material. Chemical Engineering and Processing 41(6): 487-499
Naidis, G.V. 2007: Simulation of convection-stabilized low-current glow and arc discharges in atmospheric-pressure air. Plasma Sources Science and Technology 16(2): 297-303
Erriguible, A.; Bernada, P.; Couture, F.; Roques, M. 2006: Simulation of convective drying of a porous medium with boundary conditions provided by CFD. Chemical Engineering Research and Design 84(2): 113-123
Meese, E.A.; Nrstrud, H. 2002: Simulation of convective heat flux and heat penetration for a spacecraft at re-entry. Aerospace Science and Technology 6(3): 185-194
Childs, P.P.; Qureshi, A.L.; Raman, S.; Alapaty, K.; Ellis, R.; Boyles, R.; Niyogi, D. 2006: Simulation of convective initiation during IHOP_2002 using the flux-adjusting surface data assimilation system (FASDAS). Monthly Weather Review 134(1): 134-148
Raspo, I.; Gilly, B.; Amiroudine, S.; Bontoux, P.; Zappoli, B. 1999: Simulation of convective instabilities inside a supercritical fluid layer under Rayleigh-Bénard configuration. Journees du Gdr Pr 2m 96(6): 1059-1065
Prazak, J.; Patek, J. 1992: Simulation of convective temperature oscillations in phase-change processes. International Journal of Heat and Mass Transfer 35(2): 393-401
Luiz, A.M.; Gorelov, Y.A.; Nicolsky, R. 1999: Simulation of conversion gain and reflectivity coefficients in heterodyne detector using a Superconductor : Normal metal : Superconductor junction. Ieee Trans. Appl. Supercond 9(2): 4448-4451
Bayou, S.; Mouzali, M.; Aloui, F.; Lecamp, L.; Lebaudy, P. 2013: Simulation of conversion profiles inside a thick dental material photopolymerized in the presence of nanofillers. Polymer Journal 45(8): 863-870
Desilles, N.; Lecamp, L.; Lebaudy, P.; Youssef, B.; Lebaudy, Z.; Bunel, C. 2006: Simulation of conversion profiles within dimethacrylate thick material during photopolymerization. Validation of the simulation by thermal analysis data. Application to the synthesis of a gradient structure material. Polymer (Guildford) 47(1): 193-199
Sharma, S.; Singh, H.; Gerhart, G.R. 2007: Simulation of Convoy of Unmanned Vehicles using Agent Based Modeling. Proc. Spie Int. Soc. Opt. Eng: 673605.1-673605.8
Elbealy, M.; Leskinen, N.; Fredrikson, H. 1995: Simulation of cooling conditions in secondary cooling zones in continuous casting process. Ironmaking and Steelmaking 22(3): 246-255
Kumar, A.; Ghosh, S.; Dhindaw, B.K. 2010: Simulation of cooling of liquid Al-33 wt.% Cu droplet impinging on a metallic substrate and its experimental validation. Acta Materialia 58(1): 122-133
Petruchik, A.I.; Solodukhin, A.D.; Fisenko, S.P. 2001: Simulation of cooling of water droplet and film flows in large natural wet cooling towers. Journal of Engineering Physics and Thermophysics 74(1): 62-68
Ebenhoch, G.; Speer, T.M. 1996: Simulation of cooling systems in gas turbines. J. Turbomach 118(2): 301-306
Murphy, S.H.; Tingyun Wen, J.; Saridis, G.N. 1991: Simulation of cooperating robot manipulators on a mobile platform. IEEE Transactions on Robotics and Automation 7(4): 468-478
Wang, T.D.; Fyfe, C. 2006: Simulation of Cooperation for Price Competition in Oligopolies. Lect. Notes Comput. Sci: 718-725
Hsu, H.P.; Paul, W.; Binder, K. 2007: Simulation of copolymer bottle-brushes. Macromol. Symp: 58-67
Masse, N.; Piron, D.L. 1993: Simulation of copper cementation (metal displacement reactions). Journal of the Electrochemical Society 140(10): 2818-2824
Ghosh, S.; Das, G.; Prasanta Kumar, D.A.S. 2010: Simulation of core annular downflow through CFD: A comprehensive study. Chemical Engineering and Processing 49(11): 1222-1228
Ghosh, S.; Das, G.; Kumar Das, P. 2011: Simulation of core annular in return bends-A comprehensive CFD study. Chemical Engineering Research and Design 89(11): 2244-2253
Jianfen, L.I.U.; Govinda Raju, G.R. 1994: Simulation of corona discharge : negative corona in SF6. IEEE Transactions on Dielectrics and Electrical Insulation 1(3): 520-529
Jianfen, L.I.U.; Govinda Raju, G.R. 1994: Simulation of corona discharge : positive corona in SF6. IEEE Transactions on Dielectrics and Electrical Insulation 1(3): 530-537
Lam, F.; Yintang, W.A.N.G.; Barrett, J.D. 1994: Simulation of correlated nonstationary lumber properties. Journal of Materials in Civil Engineering 6(1): 34-53
Correia, P.F.; Ferreira de Jesus, J.M. 2010: Simulation of correlated wind speed and power variates in wind parks. Electric Power Systems Research 80(5): 592-598
Lei, L.I.; Li, D.Y. 2011: Simulation of corrosion-erosion of passive metals using a micro-scale dynamical model. International Wear of Materials Conference 271(9-10): 1404-1410
Bjerken, C.; Stahle, P. 2008: Simulation of corrosion fatigue crack growth under mixed-mode loading. Eng. Fract. Mech 75(3-4): 440-451
Malik, J.I.; Mirza, N.M.; Mirza, S.M. 2012: Simulation of corrosion product activity in extended operating cycles of PWRs under flow rate transient and nonlinearly rising corrosion rates coupled with pH effects. Nuclear Engineering and Design 249: 388-399
Hecht, J.H.; Russell, R.W.; Stephens, J.R.; Grieve, P.R. 1986: Simulation of cosmic dust spectra. The Astrophysical Journal 309(1): 90-99
Martel, H.; Wasserman, I. 1990: Simulation of cosmological voids in Λ>0 Friedmann models. The Astrophysical Journal 348(1): 1-25
Montague, C.L.; Lefebvre, L.W.; Decker, D.G.; Holler, N.R. 1990: Simulation of cotton rat population dynamics and response to rodenticide applications in Florida sugarcane. Ecological Modelling 50(1-3): 177-203
Chien, H.H.Y. 1984: Simulation of countercurrent equilibrium crystallizer. Industrial and Engineering Chemistry. Process Design and Development 23(2): 279-283
Hlavacek, V.; Nan Rompay, P. 1985: Simulation of countercurrent separation processes via global approach. Computers and Chemical Engineering 9(4): 343-350
Landwehr, B.; Wozny, G.; Hartmann, H. 1993: Simulation of coupled columns with three phases. Escape-1 : European Symposium on Computer Aided Process Engineering-1 17(5-6): 527-533
Janssen, H.H.J.M.; Ter Maten, E.J.W.; Van Huwelingen, D. 1994: Simulation of coupled electromagnetic and heat dissipation problems. Ieee Trans. Magn 30(5): 3330-3334
Costa, V.A.F.; Oliveira, L.A.; Baliga, B.R.; Sousa, A.C.M. 2004: Simulation of coupled flows in adjacent porous and open domains using a control-volume finite-element method. Numerical Heat Transfer. Part A, Applications 45(7): 675-697
Hamdami, N.; Monteau, J.Y.; Le Bail, A. 2004: Simulation of coupled heat and mass transfer during freezing of a porous humid matrix. International Journal of Refrigeration 27(6): 595-603
Menghao, Q.I.N.; Belarbi, R.; Aitmokhtar, A.; Allard, F. 2009: Simulation of coupled heat and moisture transfer in air-conditioned buildings. Automation in Construction 18(5): 624-631
Aittaleb, T.; Abdelbaki, A.; Zrikem, Z. 2014: Simulation of coupled heat transfers in a hollow tile with two vertical and three horizontal uniform rectangular cavities heated from below or above. Energy and Buildings 84: 628-632
Nakhla, N.M.; Ruehli, A.E.; Nakhla, M.S.; Achar, R. 2006: Simulation of coupled interconnects using waveform relaxation and transverse partitioning. IEEE Transactions on Advanced Packaging 29(1): 78-87
Zohdi, T.I. 2010: Simulation of coupled microscale multiphysical-fields in particulate-doped dielectrics with staggered adaptive FDTD. Computer Methods in Applied Mechanics and Engineering 199(49-52): 3250-3269
Hummel, K.; Martl, M.G. 1986: Simulation of coupled modification reactions of polymers. I: Monosubstitution and double bond shift of 1,4-polybutadiene. die Makromolekulare Chemie 187(11): 2675-2683
Martl, M.G.; Saf, R.; Hummel, K. 1990: Simulation of coupled modification reactions of polymers. V, Formation of conjugated double bonds by substitution of 1,4-polybutadiene coupled with partial double bond shift. Polymer (Guildford) 31(5): 939-943
Martl, M.G.; Hummel, K. 1990: Simulation of coupled modification reactions of polymers. VI : Mono- and disubstitution of 1,4-polybutadiene, coupled with partial double-bond shift. Macromolecular Chemistry and Physics 191(2): 289-300
Babich, D.V. 2004: Simulation of coupled processes of deformation and cracking in elastic brittle materials. Strength of Materials 36(2): 178-184
Kim, W.S.; Kim, D.S.; Kuznetsov, A.V. 2000: Simulation of coupled turbulent flow and heat transfer in the wedge-shaped pool of a twin-roll strip casting process. International Journal of Heat and Mass Transfer 43(20): 3811-3822
Yang, W.A.N.L.I.; Chen, Y.A.N.; Zheng, X.I.A.O.L.I.N. 2003: Simulation of coupling heat transfer of component system in ICE combustion chamber. European Journal of Mechanical and Environmental Engineering 48(4): 219-224
Yongwang, K.A.N.G.; Weixing, C.H.E.N.; Kania, R.; Van Boven, G.; Worthingham, R. 2011: Simulation of crack growth during hydrostatic testing of pipeline steel in near-neutral pH environment. Corrosion Science 53(3): 968-975
Nairn, J.A. 2005: Simulation of crack growth in ductile materials. Engineering Fracture Mechanics 72(6): 961-979
Saimoto, A.; Imai, Y.; Motomura, F. 1999: Simulation of crack growth in thermal stress cleaving using line heat source. Jsme International Journal. Series A, Solid Mechanics and Material Engineering 42(4): 578-584
Kiyak, Y.; Fedelich, B.; May, T.; Pfennig, A. 2008: Simulation of crack growth under low cycle fatigue at high temperature in a single crystal superalloy. Engineering Fracture Mechanics 75(8): 2418-2443
Dongbin, W.E.I.; Jingtao, H.A.N.; Tieu, A.K.; Zhengyi, J.I.A.N.G. 2004: Simulation of crack healing in BCC Fe. Scripta Materialia 51(6): 583-587
Steigemann, M.; Specoviusneugebauer, M.; Fulland, M.; Richard, H.A. 2010: Simulation of crack paths in functionally graded materials. Engineering Fracture Mechanics 77(11): 2145-2157
Toda, H.; Kobayashi, T. 1997: Simulation of crack propagating in discontinuously reinforced metal matrix composite. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science 28(10): 2149-2157
Tafreshi, A. 2011: Simulation of crack propagation in anisotropic structures using the boundary element shape sensitivities and optimisation techniques. Engineering Analysis with Boundary Elements 35(8): 984-995
Seong Hyeok, S.O.N.G.; Paulino, G.H.; Buttlar, W.G. 2006: Simulation of crack propagation in asphalt concrete using an intrinsic cohesive zone model. Journal of Engineering Mechanics 132(11): 1215-1223
Aure, T.W.; Loannides, A.M. 2010: Simulation of Crack Propagation in Concrete Beams with Cohesive Elements in ABAQUS. Transportation Research Record (2154): 12-21
Jun, Z.H.A.N.G.; Li, V.C. 2004: Simulation of crack propagation in fiber-reinforced concrete by fracture mechanics. Cement and Concrete Research 34(2): 333-339
Baker, M. 2009: Simulation of crack propagation in mixed mode and at bimaterial interfaces using trial cracks. International Workshop on Computational Mechanics of Materials 45(3): 680-683
Baker, M.; Rosler, J. 2012: Simulation of crack propagation in thermal barrier coatings with friction. Iwcmm International Workshop on Computational Mechanics of Materials 52(1): 236-239
Jun, Z.H.A.N.G.; Leung, C.K.Y.; Yuan, G.A.O. 2011: Simulation of crack propagation of fiber reinforced cementitious composite under direct tension. Engineering Fracture Mechanics 78(12): 2439-2454
Pamin, J.; De Borst, R. 1998: Simulation of crack spacing using a reinforced concrete model with an internal length parameter. Archive of Applied Mechanics (1991) 68(9): 613-625
Linsbaver, H.N.; Ingraffer, A.R.; Rossmanith, H.P.; Wawrzynek, P.A. 1989: Simulation of cracking in large arch dam.I - Simulation d'une fissuration dans un grand barrage voûte.I. Journal of Structural Engineering (New York) 115(7): 1599-1615
Linsbauer, H.N.; Ingraffea, A.R.; Rossmanith, H.P.; Wawrzynek, P.A. 1989: Simulation of cracking in large dam.II - Simulation d'une fissuration dans un grand barrage voûte.II. Journal of Structural Engineering (New York) 115(7): 1616-1630
Yujing, J.I.A.N.G.; Bo, L.I.; Yamashita, Y. 2009: Simulation of cracking near a large underground cavern in a discontinuous rock mass using the expanded distinct element method. International Journal of Rock Mechanics and Mining Sciences (1997) 46(1): 97-106
Gao, S.; Nakasa, K.; Kato, M. 2001: Simulation of cracking patterns in sprayed coating under equi-biaxial tension. Jsme International Journal. Series A, Solid Mechanics and Material Engineering 44(3): 406-413
Pestchanyi, S.E.; Linke, J. 2007: Simulation of cracks in tungsten under ITER specific transient heat loads. Soft-24 : Symposium on Fusion Technology 82(15-24): 1657-1663
Noels, L.; Stainier, L.; Ponthot, J.P. 2006: Simulation of crashworthiness problems with improved contact algorithms for implicit time integration. International Symposium on the Crashworthiness of Light-Weight Automotive Structures 32(5): 799-825
Ankit, K.; Prasad, N. 2011: Simulation of creep cavity growth in Inconel 718 alloy. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 528(12): 4209-4216
Ntuen, C.A.; Park, E.H. 1999: Simulation of crew size requirement in a maintained reliability system. International Conference on Computers and Industrial Engineering 37(1-2): 219-222
Chalykh, R.; Pundaleva, I.; Kim, S.; Cho, H.K.; Moon, J.T. 2006: Simulation of critical dimension and profile metrology based on scatterometry method. Proc. Spie Int. Soc. Opt. Eng: 63491K.1-63491K.9
Jungling, W.; Pichler, P.; Selberherr, S.; Guerrero, E.; Potzl, H.W. 1985: Simulation of critical IC fabrication processes using advanced physical and numerical methods. Ieee Trans. Electron Devices 32(2): 156-167
Pichler, P.; Jungling, W.; Selberherr, S.; Guerrero, E.; Potzl, H.W. 1985: Simulation of critical IC-fabrication steps. Ieee Trans. Electron Devices 32(10): 1940-1953
Khaleghinia, J.; Vanini, A.S.; Abolghasemzadeh, M.; Kordani, N. 2013: Simulation of critical J-integral in functionally graded steels components weakened by U and blunt V-shape notches under Charpy test. Computational Materials Science 70: 123-132
Dykman, M.I.; Luchinsky, D.G.; Mannella, R.; Mcclintock, P.V.E.; Stein, N.D.; Stocks, N.G. 1994: Simulation of critical phenomena in nonlinear optical systems. Advances in Chemical Physics 85: 265-378
Zhang, Z.J.; Dai, G.Z.; Wu, S.N.; Dong, L.X.; Liu, L.L. 2009: Simulation of 42CrMo steel billet upsetting and its defects analyses during forming process based on the software DEFORM-3D. International Conference on Physical and Numerical Simulation of Material Processing 499(1-2): 49-52
Gandeza, A.T.; Shoji, S.; Yamada, I. 1991: Simulation of crop response to polyolefin-coated urea. I. Field dissolution. II. Nitrogen uptake by corn. Soil Science Society of America Journal 55(5): 1462-1473
Challinor, A.J.; Wheeler, T.R.; Slingo, J.M.; Craufurd, P.Q.; Grimes, D.I.F. 2005: Simulation of crop yields using ERA-40: Limits to skill and nonstationarity in weather-yield relationships. Journal of Applied Meteorology (1988) 44(4): 516-531
Jing, L.I.; Chan, F.T.S.; Chong, A.Y.L. 2013: Simulation of cross-border competitions of free Internet content providers. Computers in Industry 64(6): 754-764
Lindeborg, C. 1989: Simulation of cross-direction moisture control. Pulp Pap. Can 90(12): 183-188
Lam, K.; Jiang, G.D.; Liu, Y.; So, R.M.C. 2006: Simulation of cross-flow-induced vibration of cylinder arrays by surface vorticity method. Journal of Fluids and Structures 22(8): 1113-1131
Pater, Z. 1998: Simulation of cross-wedge rolling process using the upper-bound method. Scandinavian Journal of Metallurgy 27(3): 120-127
Sato, T.; Fujino, A.; Hayasiii, S.; Oyama, M.; Ono, K. 2002: Simulation of crosslink and graft mechanism of hydrogenated-NBR/zinc di-methacrylate composites by moving die rheometer. Rubber Chemistry and Technology 75(5): 943-954
Papaioannou, D.A.; Dimopoulos, K.Z.; Avaritsiotis, J.N. 1993: Simulation of crosstalk in high-speed multilayer off-chip interconnections. Microelectronics Journal 24(7): 747-757
Reynoso, R.O.; De Michelis, A. 1988: Simulation of cryogenic batch freezers - Simulation des congélateurs cryogéniques discontinus. International Journal of Refrigeration 11(1): 6-10
Caruso, G.; Bartels, H.W.; Iseli, M.; Meyder, R.; Nordlinder, S.; Pasler, V.; Porfiri, M.T. 2006: Simulation of cryogenic He spills as basis for planning of experimental campaign in the EVITA facility. Nuclear Fusion 46(1): 51-56
Sazonov, A.B.; Kagramanov, Z.G.; Magomedbekov, E.P.; Andreev, B.M.; Asnovskii, V.N.; Baranov, S.V.; Glazkov, S.P.; Zharkov, A.V.; Kozhanov, M.G. 2001: Simulation of cryogenic rectification of tritium-containing isotopic hydrogen mixtures. Atomic Energy (New York, N.Y.) 91(3): 721-731
Kelly, S.; Segal, C.; Peugeot, J. 2011: Simulation of Cryogenics Cavitation. Aiaa Journal 49(11): 2502-2510
Holsa, J. 1990: Simulation of crystal field effect in monoclinic rare earth oxyhydroxides doped with trivalent europium. Journal of Physical Chemistry (1952) 94(12): 4835-4838
Logashenko, D.; Fischer, T.; Motz, S.; Gilles, E.D.; Wittum, G. 2006: Simulation of crystal growth and attrition in a stirred tank. Parallel Adaptive Computing Workshop (Hohenwart 2003-11) 9(3): 175-183
Vitagliano, P.L.; Derrico, G.; Vitagliano, V. 2002: Simulation of crystal growth in a gravitational field in the presence of convection. Entropie (Paris) 38(239-40): 143-148
Mizuseki, H.; Kawazoe, Y. 1999: Simulation of crystal growth in solution by hybrid modeling. Materials Transactions - Jim 40(11): 1337-1341
Balokhonov, R.R.; Makarov, P.V.; Romanova, V.A.; Smolin, I.Y. 1999: Simulation of crystal plasticity under dynamic loading. International Workshop on Computational Mechanics of Materials : 16(1-4): 355-361
Van Veenendaal, E.; Nijdam, A.J.; Van Suchtelen, J. 2002: Simulation of crystal shape evolution in two dimensions. Journal of Crystal Growth 235(1-4): 603-618
Chen, X.A.; Chen, Z.F.; Heng, F.; Tang, Y. 1990: Simulation of crystal structure of Tl Ba2Can-1CunO2n+3 (n=1, 2, 3, 4) superconductors by empirical atom-atom potentials. Solid State Communications 73(10): 683-685
Evain, M.; Myunghwan, W.H.A.N.G.B.O.; Beno, M.A.; Geiser, U.; Williams, J.M. 1987: Simulation of crystal structures by empirical atom-atom potentials. I: The tetragonal-to-orthorhombic distortion in La2CuO4 and in the high-temperature superconductors La2-xMxCuO4 (M=Ba, Sr). Journal of the American Chemical Society 109(25): 7917-7918
Evain, M.; Myunghwan, W.H.A.N.G.B.O.; Beno, M.A.; Williams, J.M. 1988: Simulation of crystal structures by empirical atom-atom potentials. II: The orthorhombic-to-tetragonal phase transition in the high-temperature (Tc>90 K) superconductor YBa2Cu3O7-y. Journal of the American Chemical Society 110(1): 614-616
Van Sark W G, J.H.M.; Jansen, B.F.P.; Tang, X.; Giling, L.J.; Crans, W. 1990: Simulation of crystalline GaAs solar cell structures with the amorphous semiconductor analysis package. Solar cells 29(4): 319-333
Chongmu, L.E.E. 1986: Simulation of crystalline silica structures based on a potential with a many-body term. Journal of Physics. C. Solid State Physics 19(28): 5555-5568
Kart, H.H.; Uludogan, M.; Cagin, T.; Tomak, M. 2004: Simulation of crystallization and glass formation of binary Pd-Ag metal alloys. Journal of Non-Crystalline Solids 342(1-3): 6-11
Miki, H. 1995: Simulation of crystallization characteristics of industrial crystallizer for aluminum hydroxide. Kagaku Kogaku Ronbunshu 21(3): 403-410
Ito, H.; Takimoto, J.I.; Tada, K.; Koyama, K. 1996: Simulation of crystallization in injection molding process with a large mold. Kobunshi Ronbunshu (Tokyo) 53(6): 333-338
Chunlei, R.U.A.N.; Jie, O.U.Y.A.N.G. 2012: Simulation of Crystallization Kinetics and Morphology During Nonisothermal Crystallization in Short Fiber Reinforced Composites. Journal of Applied Polymer Science 123(3): 1584-1596
Attiaessaies, S.; Zayani, L.; Ben Hassen Chehimi, D.; Cohen Adad, R.; Kbirariguib, N.; Trabelsiayadi, M. 2010: Simulation of crystallization sequence during the evaporation of Chott El Jerid brine (south Tunisia). Thermochimica Acta 503-504: 8-11
Min Ku, J.E.O.N.; Jin Myung, S.H.I.N.; Jang Jin, P.A.R.K.; Geun Ii, P.A.R.K. 2012: Simulation of Cs behavior during the high temperature voloxidation process using the HSC chemistry code. Journal of Nuclear Materials 430(1-3): 37-43
Hall, G.J.; Govindjee, S.; Sittner, P.; Novak, V. 2007: Simulation of cubic to monoclinic-II transformations in a single crystal Cu-Al-Ni tube. International Journal of Plasticity 23(1): 161-182
Zhaoqing, Y.A.N.G.; Khangaonkar, T.; Calvi, M.; Nelson, K. 2010: Simulation of cumulative effects of nearshore restoration projects on estuarine hydrodynamics. Ecological Modelling 221(7): 969-977
Imaizumi, T.; Yamamoto, N.; Sawa, K.; Tomita, M.; Murakami, M.; Hirabayashi, I. 2004: Simulation of current and temperature distribution in YBCO bulk's electrical contact. Phys., C Supercond 412-14: 668-672
Ishii, K.; Tashiro, S. 2008: Simulation of current-jumping phenomena in PbTiO3-Pb(Sc1/2Nb1/2)O3 system piezoelectric ceramics. Nippon Seramikkusu Kyokai Gakujutsu Ronbunshi 116(11): 1214-1221
Pei, W.A.N.G.; Wei, W.E.I.; Bin, C.A.O.; Zhiyin, G.A.N.; Sheng, L.I.U. 2010: Simulation of current spreading for GaN-based light-emitting diodes. Optics and Laser Technology 42(5): 737-740
Troni, F.; Menozzi, R.; Colegrove, E.; Buurma, C. 2013: Simulation of Current Transport in Polycrystalline CdTe Solar Cells. J. Electron. Mater 42(11): 3175-3180
Vexler, M.I. 2006: Simulation of current-voltage characteristics of a MOS structure considering the tunnel transport of carriers in semiconductor. Journal of Physics. D, Applied Physics 39(1): 61-65
Bauza, D.; Pananakakis, G. 1991: Simulation of current-voltage characteristics of Ti-W/nSi Schottky diodes using defects parameters extracted from deep level transient spectroscopy. Journal of Applied Physics 69(5): 3357-3359
Scheeline, A. 1984: Simulation of current waveforms in high voltage spark sources. III: Numerical integration and inclusion of gap dynamic impedance. Applied Spectroscopy 38(2): 124-135
Radhakrishnan, B.; Zacharia, T. 1995: Simulation of curvature-driven grain growth by using a modified Monte Carlo algorithm. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science 26(1): 167-180
Simson, S.A.; Cole, C. 2008: Simulation of curving at low speed under high traction for passive steering hauling locomotives. Vehicle System Dynamics 46(12): 1107-1121
Ariascuevas, O.; Zili, L.I.; Popovici, R.I.; Schipper, D.J. 2010: Simulation of curving behaviour under high traction in lubricated wheel-rail contacts. Vehicle System Dynamics 48: 299-316
Smaoui, M.; Bouaziz, Z.; Zghal, A. 2008: Simulation of Cutting Forces for Complex Surfaces in Ball-End Milling. International Journal of Simulation Modelling 7(2): 93-105
Olsson, M.; Soderberg, S.; Jacobson, S.; Hogmark, S. 1989: Simulation of cutting tool wear by a modified pin-on-disc test. International Journal of Machine Tools and Manufacture 29(3): 377-390
Hyun Jung, O.G.; Shi Woo, R.H.E.E.; In Seok, K.A.N.G. 1992: Simulation of CVD process by boundary integral technique. Journal of the Electrochemical Society 139(6): 1714-1720
Wang, M.I.N.G.Z.H.A.N.G.; Lin, S.H.I.; Li, C.H.E.N.G.H.U.A.; Wang, Z.H.O.N.G.G.U.A.N.G.; Xiao, J.I.M.E.I. 1997: Simulation of cyclic deformation of bicrystals : Effects of orientation and deformation properties of constituent grains. Acta Mechanica Solida Sinica 10(4): 345-351
Xiaochuang, W.U.; Grummon, D.S.; Pence, T.J. 1999: Simulation of cyclic displacement by counterpoised shape memory elements. Journal of Engineering Materials and Technology 121(1): 67-74
Surajit Kumar, P.A.U.L.; Sivaprasad, S.; Dhar, S.; Tarafder, M.; Tarafder, S. 2010: Simulation of cyclic plastic deformation response in SA333 C-Mn steel by a kinematic hardening model. Computational Materials Science 48(3): 662-671
Li, B.; Reis, L.; De Freitas, M. 2006: Simulation of cyclic stress/strain evolutions for multiaxial fatigue life prediction. Icbmff: International Conference on Biaxial/Multiaxial Fatigue and Fracture 28(5-6): 451-458
Sheng Yan, H.U.; Chang, Y.P.; Chen, S.C. 1997: Simulation of cyclic transient variations in mould temperatures during epoxy moulding compound curing stage of transfer moulding process. Plastics Rubber and Composites Processing and Applications 26(6): 256-263
Bieniasz, L.; Suski, L. 1988: Simulation of cyclic voltammetry for the linked mechanism of the hydrogen electrode reaction in molten carbonates. Journal of Electroanalytical Chemistry and Interfacial Electrochemistry 249(1-2): 155-165
Manor, R.; Shalom, B.; Ioinovici, A. 1990: Simulation of cyclically switching systems using the generalized alternor definition. International Journal of Systems Science 21(7): 1281-1287
Roy Abraham, K.; Mohanty, U.C.; Dash, S.K. 1995: Simulation of cyclones using synthetic data. Proceedings of the Indian Academy of Sciences. Earth and Planetary Sciences 104(4): 635-666
Pawlus, P.; Michalski, J. 2009: Simulation of cylinder 'zero-wear' process. Wear 266(1-2): 208-213
Ragheb, H.A.; Hamid, M. 1988: Simulation of cylindrical scattering surface by conducting strips. International Journal of Electronics 64(4): 521-535
Scheben, C. 2006: Simulation of d'-dimensional cellular automata on d-dimensional cellular automata. Lect. Notes Comput. Sci: 131-140
Tsuda, N.; Yukawa, T. 1993: Simulation of 2D dynamical triangulation with higher order curvature terms. Physics Letters. Section B 305(3): 223-229
Van den Broek, M.H.L.M. 1985: Simulation of 3D electron beams with a fitting technique. Optik (Stuttgart) 71(1): 27-30
Wenzhong, S.H.E.N.; Ta Phuoc, L.O.C. 1995: Simulation of 2D external viscous flows by means of a domain decomposition method using an influence matrix technique. International Journal for Numerical Methods in Fluids 20(10): 1111-1136
Weber, W.; Steinmann, P.; Kuhn, G. 2013: Simulation of 3D fatigue crack propagation using an implicit time integration scheme. Int. J. Fatigue 50: 2-9
Kramer, J.; Ravnik, J.; Jecl, R.; Skerget, L. 2011: Simulation of 3D flow in porous media by boundary element method. Engineering Analysis with Boundary Elements 35(12): 1256-1264
Reizer, R. 2011: Simulation of 3D Gaussian surface topography. Wear 271(3-4): 539-543
Uehira, K. 2006: Simulation of 3-D image depth perception on 3-D display using two stereoscopic displays at different depths. Proc. Spie Int. Soc. Opt. Eng: 605517.1-605517.8
De Luycker, E.; Morestin, F.; Boisse, P.; Marsal, D. 2009: Simulation of 3D interlock composite preforming. Composite Structures 88(4): 615-623
Rongier, G.; Collondrouaillet, P.; Filipponi, M. 2014: Simulation of 3D karst conduits with an object-distance based method integrating geological knowledge. Geomorphology (Amsterdam) 217: 152-164
Beeckman, J.; Neyts, K.; Hutsebaut, X.; Cambournac, C.; Haelterman, M. 2005: Simulation of 2-D lateral light propagation in nematic-liquid-crystal cells with tilted molecules and nonlinear reorientational effect. International Workshop on Optical Waveguide Theory and Numerical Modelling 37(1-3): 95-106
Van Vlimmeren, B.A.C.; Maurits, N.M.; Zvelindovsky, A.V.; Sevink, G.J.A.; Fraaije, J.G.E.M. 1999: Simulation of 3D mesoscale structure formation in concentrated aqueous solution of the triblock polymer surfactants (ethylene oxide)13(propylene oxide)30(ethylene oxide)13 and (propylene oxide)19(ethylene oxide)33(propylene Oxide)19. Application of dynamic mean-field density functional theory. Macromolecules 32(3): 646-656
Jinlong, W.A.N.G.; Fuming, W.A.N.G.; Changrong, L.I.; Jiongming, Z.H.A.N.G. 2010: Simulation of 3D-Microstructure in Free-cutting Steel 9SMn28 under Water Cooling Condition with Convection and Porosity. Isij International 50(2): 222-230
Demmouche, K.; Farchioni, F.; Ferling, A.; Montvay, I.; Munster, G.; Scholz, E.E.; Wuilloud, J. 2010: Simulation of 4d N = 1 supersymmetric Yang-Mills theory with Symanzik improved gauge action and stout smearing. European Physical Journal. C, Particles and Fields 69(1-2): 147-157
Gupta, S.; Tannehill, J.C.; Mehta, U.B.; Bogdanoff, D.W. 2007: Simulation of 3-D nonequilibrium seeded airflow in the NASA Ames MHD channel. Journal of Thermophysics and Heat Transfer 21(2): 276-283
Sriram, V.; Sannasiraj, S.A.; Sundar, V. 2006: Simulation of 2-D nonlinear waves using finite element method with cubic spline approximation. Journal of Fluids and Structures 22(5): 663-681
Song, S.J.; Kim, C.H. 2002: Simulation of 3-D radiation beam patterns propagated through a planar interface from ultrasonic phased array transducers. Ui'01 Ultrasonics International 40(1-8): 519-524
Artlich, S.; Hartge, E.U.; Werther, J. 1998: Simulation of 2-D temperature distributions in fluidized bed reactors for highly exothermic reactions. Industrial and Engineering Chemistry Research 37(3): 782-792
Pribyl, O.; Goulias, K.G. 2005: Simulation of daily activity patterns incorporating interactions within households : Algorithm overview and performance. Transportation Research Record (1926): 135-141
Venkatesh, B.; Jain, M.K. 2000: Simulation of daily flows using topography-based rainfall-runoff model. Journal of the Institution of Engineers. India. Civil Engineering Division 81(DEC): 127-132
Jain, M.K.; Seth, S.M.; Ramasastri, K.S. 1996: Simulation of daily runoff of Hemavati sub-basin at Sakleshpur using tank model. Journal of the Institution of Engineers. India. Civil Engineering Division 77(AOU): 67-71
Hook, K.W.; Robeson, S.M. 1998: Simulation of daily total wind energy using a time-series model. Physical Geography 19(6): 463-484
Goswami, P.; Baruah, J. 2008: Simulation of Daily Variation of Suspended Particulate Matter over Delhi : Relative Roles of Vehicular Emission, Dust, and Domestic Appliances. Monthly Weather Review 136(9): 3597-3607
Liang, Q.; Bonhwick, A.G.L.; Stelling, G. 2004: Simulation of dam- and dyke-break hydrodynamics on dynamically adaptive quadtree grids. International Journal for Numerical Methods in Fluids 46(2): 127-162
Guoju, L.I.; Xu, Z.H.A.N.G.; Qunbo, F.A.N.; Linlin, W.A.N.G.; Hongmei, Z.H.A.N.G.; Fuchi, W.A.N.G.; Yangwei, W.A.N.G. 2014: Simulation of damage and failure processes of interpenetrating SiC/Al composites subjected to dynamic compressive loading. Acta Materialia 78: 190-202
Echle, R.; Voyiadjis, G.Z. 1999: Simulation of damage evolution in a uni-directional titanium matrix composite subjected to high cycle fatigue. International Journal of Fatigue 21(9): 909-923
Biner, S.B.; Hu, S.Y. 2009: Simulation of damage evolution in composites : A phase-field model. Acta Materialia 57(7): 2088-2097
Biner, S.B.; Hu, S.Y. 2009: Simulation of damage evolution in discontinously reinforced metal matrix composites: a phase-field model. Int. J. Fract 158(2): 99-105
Brunig, M.; Gerke, S. 2011: Simulation of damage evolution in ductile metals undergoing dynamic loading conditions. International Symposium on Plasticity and its Current Applications. Minisymposium Conventional and Emerging Materials 27(10): 1598-1617
Soni, S.; Das, S.; Chattopadhyay, A. 2009: Simulation of Damage-features in a Lug Joint using Guided Waves. Journal of Intelligent Material Systems and Structures 20(12): 1451-1464
Soni, S.; Banerjee, S.; Das, S.; Chattopadhyay, A. 2008: Simulation of Damage-Features in Complex Joint using Guided Waves. Modeling, Signal Processing, and Control for Smart Structures: 69260O.1-69260O.12
Corigliano, A.; Mariani, S. 2001: Simulation of damage in composites by means of interface models: parameter identification. Workshop Recent Advances in Continuum Damage Mechanics for Composites 61(15): 2299-2315
Weber, M.A.; Penny, R.K. 1994: Simulation of damage in industrial gas bottles. International Journal of Pressure Vessels and Piping 59(1-3): 299-305
Gawin, D.; Pesavento, F.; Schrefler, B.A. 2002: Simulation of damage-permeability coupling in hygro-thermo-mechanical analysis of concrete at high temperature. Communications in Numerical Methods in Engineering 18(2): 113-119
Alonso, E.; Caturla, M.J.; Diaz de la Rubia, T.; Perlado, J.M. 2000: Simulation of damage production and accumulation in vanadium. J. Nucl. Mater 276: 221-229
Bartolome, E.; Granados, X.; Bozzo, B.; Navau, C.; Puig, T.; Obradors, X. 2008: Simulation of dc magnetic effects due to geometrically defined grain boundaries in type-II superconductors. Physica. C. Superconductivity 468(6): 492-497
Tai, T.C.; Carico, D. 1995: Simulation of DD-963 ship airwake by Navier-Stokes method. Journal of Aircraft 32(6): 1399-1401
Takahashi, T.; Nakagawa, H.; Satofuka, Y.; Wang, H. 2001: Simulation of debris flow deposition by open-type Sabo dam. Kyoto Daigaku Bosai Kenkyujo Nenpo (44): 185-191
Kuntze, T.M.; Saxen, H. 1994: Simulation of deep-bed kilning of malt. Industrial and Engineering Chemistry Research 33(2): 321-328
Bruggemann, R.; Cordes, H.; Lips, K. 1998: Simulation of deep defect filling in n-type Schottky barrier structures. J. Non-Cryst. Solids 227-30: 1173-1176
Park, C.; Gott, J.R. 1991: Simulation of deep one- and two-dimensional redshift surveys. Monthly Notices of the Royal Astronomical Society 249(2): 288-299
Lambrakos, S.G.; Metzbower, E.A.; Milewski, J.; Lewis, G.; Dixon, R.; Korzekwa, D. 1994: Simulation of deep penetration welding of stainless steel using geometric constraints based on experimental information. Journal of Materials Engineering and Performance 3(5): 639-648
Woosung, C.H.O.I.; Fariborz, A.S.S.A.D.E.R.A.G.H.I.; Youngjune, P.A.R.K.; Hongshick, M.I.N.; Chinming, H.U.; Dutton, R.W. 1995: Simulation of deep submicron SOI N-MOSFET considering the velocity overshoot effect. IEEE Electron Device Letters 16(7): 333-335
Kuo, Y.K.; Yen, S.H.; Wang, Y.W. 2007: Simulation of deep ultraviolet light-emitting diodes. Proc. Spie Int. Soc. Opt. Eng: 66991J.1-66991J.8
Tian, X.; Liu, G.; Tian, Y.; Zhang, P.; Zhang, X. 2005: Simulation of deep UV lithography with SU-8 resist by using 365 nm light source. Microsyst. Technol 11(4-5): 265-270
Kapinos, V.G.; Osetskii, Y.N.; Platonov, P.A. 1991: Simulation of defect cascade collapse in hcp zirconium. Journal of Nuclear Materials 184(2): 127-143
Ganchenkova, M.G.; Nazarov, A.V. 2000: Simulation of defect complex migration in ordered intermetallic structures. Comput. Mater. Sci 17(2-4): 319-323
Sumin, V.V.; Muzychka, A.Y. 2002: Simulation of defect complexes in solid solutions of interstitial atoms in transition metals. Physics of Metals and Metallography 94(2): 153-160
Ortiz, C.J.; Terentyev, D.; Olsson, P.; Vila, R.; Malerba, L. 2011: Simulation of defect evolution in electron-irradiated dilute FeCr alloys. J. Nucl. Mater 417(1-3): 1078-1081
Mery, D.; Hahn, D.; Hitschfeld, N. 2005: Simulation of defects in aluminium castings using CAD models of flaws and real X-ray images. Insight (Northampton) 47(10): 618-624
Amrani, M.; Jaillet, F.; Melkemi, M.; Shariat, B. 2001: Simulation of deformable organs with a hybrid approach. Revue Internationale de Cfao et d'Informatique Graphique 16(2): 213-242
Higashitani, K.; Iimura, K.; Sanda, H. 2001: Simulation of deformation and breakup of large aggregates in flows of viscous fluids. Chem. Eng. Sci 56(9): 2927-2938
Ye, R.Q.; Han, B.Q.; Lavernia, E.J. 2005: Simulation of deformation and failure process in bimodal al alloys. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science 36(7): 1833-1840
Lopez Cascales, J.J.; Garcia de la Torre, J. 1994: Simulation of deformation and fracture of polymer chains in flowing solutions. J. Non-Cryst. Solids 172-74: 823-829
Levkovitch, V.; Sievert, R.; Svendsen, B. 2006: Simulation of deformation and lifetime behavior of a fcc single crystal superalloy at high temperature under low-cycle fatigue loading. International Journal of Fatigue 28(12): 1791-1802
Gurao, N.P.; Kumar, P.; Sarkar, A.; Brokmeier, H.G.; Suwas, S. 2013: Simulation of Deformation Texture Evolution During Multi Axial Forging of Interstitial Free Steel. Journal of Materials Engineering and Performance 22(4): 1004-1009
Liu, Y.S.; Van Houtte, P. 2001: Simulation of deformation textures in cold-rolled molybdenum sheets by the Taylor-Bishop-Hill theory. International Journal of Refractory Metals and Hard Materials 19(3): 209-216
Choi, S.H.; Shin, E.J.; Seong, B.S. 2007: Simulation of deformation twins and deformation texture in an AZ31 Mg alloy under uniaxial compression. Acta Materialia 55(12): 4181-4192
Stoll, A.; Wilkinson, A.J. 2014: Simulation of deformation twins and their interactions with cracks. Computational Materials Science 89: 224-232
Troll, C.; Pilz, M. 1998: Simulation of degradation phenomena on model enamels with historical compositions - Simulation des phénomènes de dégradation sur des modèles d'émaux à composition historique. Annual Meeting of the German Society of Glass Technology 71(10): 307-314
Senaratna, T.; Mckersie, B.D.; Stinson, R.H. 1985: Simulation of dehydration injury to membranes soybean axes by free radicals. Plant Physiology (Bethesda) 77(2): 472-474
Turon, A.; Costa, J.; Camanho, P.P.; Davila, C.G. 2007: Simulation of delamination in composites under high-cycle fatigue. Comptest 2006 International Conference on Composites Testing and Model Identification 38(11): 2270-2282
Borg, R.; Nilsson, L.; Simonsson, K. 2001: Simulation of delamination in fiber composites with a discrete cohesive failure model. Composites Science and Technology 61(5): 667-677
Wagner, W.; Balzani, C. 2008: Simulation of delamination in stringer stiffened fiber-reinforced composite shells. Computers and Structures 86(9): 930-939
Druitt, J.; Fruh, W.G. 2012: Simulation of demand management and grid balancing with electric vehicles. Journal of Power Sources 216: 104-116
Valenciasalazar, I.; Alvarez, C.; Escrivaescriva, G.; Alcazarortega, M. 2011: Simulation of demand side participation in Spanish short term electricity markets. Energy Conversion and Management 52(7): 2705-2711
Sasikumar, R.; Jacob, E.; George, B. 1998: Simulation of dendrite growth in binary alloys. Scripta Materialia 38(4): 693-701
Ranek, M.N.; Aly, B.A.D.A.W.Y.; Park, J.J. 1989: Simulation of densification in pwder metal forging. Sae Transactions 98(5): 340-352
Grillo, A.; Logashenko, D.; Stichel, S.; Wittum, G. 2010: Simulation of density-driven flow in fractured porous media. Advances in Water Resources 33(12): 1494-1507
Beben, J.; Rogowska, J.; Wojciechowski, K.F. 1986: Simulation of density fluctuation of potassium adatoms on W (112) - Simulation de la fluctuation de densité des adatomes de potassium sur W(112). International Field Emission Symposium 33 47(7): 145-148
Salama, M.; Kuo, C.P.; Lou, M. 2000: Simulation of deployment dynamics of inflatable structures. Aiaa Journal 38(12): 2277-2283
Hong, H.; Pooladidarvish, M. 2005: Simulation of depressurization for gas production from gas hydrate reservoirs. Journal of Canadian Petroleum Technology 44(11): 39-46
Gupta, I.D.; Rambabu, V. 1996: Simulation of design response spectra of strong-motion acceleration in Koyna dam region using seismological source model approach. Bulletin of the Indian Society of Earthquake Technology 33(2): 181-193
Thomas, G.O.; Edwards, D.H. 1983: Simulation of detonation cell kinematics using two-dimensional reactive blast waves. Journal of Physics. D, Applied Physics 16(10): 1881-1892
Garon Yeh, A.; Xia, L.I. 2003: Simulation of development alternatives using neural networks, cellular automata, and GIS for urban planning. Photogrammetric Engineering and Remote Sensing 69(9): 1043-1052
Arnold, B.J. 1999: Simulation of dewatering devices for predicting the moisture content of coals. Coal Preparation (New York, N.Y.) 20(1-2): 35-54
Li, X.; Weiping, H.U.A.N.G. 1995: Simulation of DFB semiconductor lasers incorporating thermal effects. IEEE Journal of Quantum Electronics 31(10): 1848-1855
Xinyu, X.U.; Baoxin, L.I.; Florez, J.F.; Li, H.K. 2006: Simulation of Diabetic Retinopathy Neovascularization in Color Digital Fundus Images. Lect. Notes Comput. Sci: 421-433
Mizutani, K.; Kawano, T.; Adachi, K.; Kumagai, N. 1999: Simulation of diamond grinding wheel to characterize the surface topography. International Journal of the Japan Society for Precision Engineering 33(4): 288-294
Koshy, P.; Ives, L.K.; Jahanmir, S. 1999: Simulation of diamond-ground surfaces. International Journal of Machine Tools and Manufacture 39(9): 1451-1470
Lu, W.C.; Zhang, R.Q. 2003: Simulation of diamond metallization using aluminum. Diamond and Related Materials 12(9): 1553-1558
Gebelin, J.C.; Jolly, M.R.; Cendrowicz, A.M.; Cirre, J.; Blackburn, S. 2004: Simulation of die filling for the wax injection process: Part I. Models for material behavior. Metallurgical and Materials Transactions. B, Process Metallurgy and Materials Processing Science 35(4): 755-759
Gebelin, J.C.; Jolly, M.R.; Cendrowicz, A.M.; Cirre, J.; Blackburn, S. 2004: Simulation of die filling for the wax injection process: Part II. Numerical simulation. Metallurgical and Materials Transactions. B, Process Metallurgy and Materials Processing Science 35(4): 761-768
Hua, X.; Herrin, D.W.; Wu, T.W.; Elnady, T. 2013: Simulation of diesel particulate filters in large exhaust systems. Applied Acoustics 74(12): 1326-1332
Duran, A.; Carmona, M.; Monteagudo, J.M. 2004: Simulation of diesel particulate matter size. Atmospheric Environment (1994) 38(36): 6203-6209
Tsitrone, E.; Chappuis, P.; Chatelier, M.; Faisse, F.; Grosman, A.; Reiter, D. 1999: Simulation of different pumping configurations for the CIEL project on Tore Supra. J. Nucl. Mater 266-69: 963-968
Allahverdi, A.; Fatih Tatari, M. 1996: Simulation of different rules in stochastic flowshops. International Conference on Computers and Industrial Engineering 31(1-2): 209-212
Huakun, Y.A.N.; Nuo, W.A.N.G.; Tiaolan, Y.U.; Qiang, F.U. 2014: Simulation of different sea-crossing traffic route structures' effects on the marine environment for the Dalian large-scale offshore airport island. Journal of Hydraulic Research 52(5): 583-599
Nakai, K.; Shinoda, M.; Mori, K. 2003: Simulation of differential phase detection method combined with astigmatic method using a half mirror in an optical pick-up. Optical Review 10(4): 267-274
Huber, M.; Schoberl, J.; Sinwel, A.; Zaglmayr, S. 2010: Simulation of Diffraction in Periodic Media with a Coupled Finite Element and Plane Wave Approach. Siam Journal on Scientific Computing 31(2): 1500-1517
Rajendran, K. 1991: Simulation of diffraction patterns of microcrystalline and amorphous bodies. Materials Chemistry and Physics 28(3): 337-344
Onoda, M. 2001: Simulation of diffuse scattering : Interlayer short-range order in Cu2Gd2/3S2 and Ti1.43S2 and two-directional positional disorder in composite crystals M1-pCr2S4-p. Aperiodic 2000 Conference 250(1-4): 83-86
Nelson, P.H.; Kaiser, A.B.; Bibby, D.M. 1991: Simulation of diffusion and adsorption in zeolites. Journal of Catalysis 127(1): 101-112
Di Cecca, A.; Freire, J.J. 2003: Simulation of diffusion and relaxations of non-dilute star chains. Polymer (Guildford) 44(8): 2589-2597
Amatore, C.; Oleinick, A.; Svir, I. 2004: Simulation of diffusion at microring electrodes through conformal mapping. Journal of Electroanalytical Chemistry (1992) 564(1-2): 245-260
Inden, G.; Neumann, P. 1996: Simulation of diffusion controlled phase transformations in steels. Steel Research 67(10): 401-407
Berryman, H.S.; Franceschetti, D.R. 1989: Simulation of diffusion controlled reaction kinetics using cellular automata. Physics Letters. a 136(7-8): 348-352
Amatore, C.; Oleinick, A.; Svir, I. 2004: Simulation of diffusion-convection processes in microfluidic channels equipped with double band microelectrode assemblies: approach through quasi-conformal mapping. Electrochemistry Communications 6(11): 1123-1130
Sharan, M.; Anil Kumar, Y.A.D.A.V. 1998: Simulation of diffusion experiments under light wind, stable conditions by a variable K-theory model. Atmospheric Environment (1994) 32(20): 3481-3492
Kehr, K.W.; Binder, K. 1984: Simulation of diffusion in lattice gases and related kinetic phenomena. Topics in Current Physics 36: 181-221
Bentz, D.P.; Tinh, N.G.U.Y.E.N. 1990: Simulation of diffusion in pigmented coatings on metals using Monte-Carlo methods. Jct, Journal of Coatings Technology 62(783): 57-63
Shyilong, L.E.E.; Yeunglong, L.U.O. 1992: Simulation of diffusion-limited aggregation : effects of launching boundary shape and non-fixed centre. Chemical Physics Letters 195(4): 405-411
Miller, J.D.; Yuan, L.; Lee, P.D.; Pollock, T.M. 2014: Simulation of diffusion-limited lateral growth of dendrites during solidification via liquid metal cooling. Acta Materialia 69: 47-59
Agarwal, U.S.; Khakhar, D.V. 1993: Simulation of diffusion-limited step-growth polymerization in 2D : effect of shear flow and chain rigidity. The Journal of Chemical Physics 99(4): 3067-3074
Yokoyama, H.; Kramer, E.J.; Fredrickson, G.H. 2000: Simulation of diffusion of asymmetric diblock and triblock copolymers in a spherical domain structure. Macromolecules 33(6): 2249-2257
Kupryazhkin, A.Y.; Zhiganov, A.N.; Risovany, D.V.; Nekrassov, K.A.; Risovany, V.D.; Golovanov, V.N. 2008: Simulation of diffusion of oxygen and uranium in uranium dioxide nanocrystals. Journal of Nuclear Materials 372(2-3): 233-238
Krishna Pant, P.V.; Boyd, R.H. 1992: Simulation of diffusion of small-molecule penetrants in polymers. Macromolecules 25(1): 494-495
Morishita, S.; Hasegawa, J.; Nakano, T.; Tsukiyama, H. 1998: Simulation of diffusion phenomena by cellular automata. Journal of the Society of Naval Architects of Japan 183: 181-187
Grigoriu, M. 1990: Simulation of diffusion processes. Journal of Engineering Mechanics 116(7): 1524-1542
Malinetskii, G.G.; Stepantsov, M.E. 1998: Simulation of diffusion processes by means of cellular automata with margolus neighborhoods. Computational Mathematics and Mathematical Physics 38(6): 973-975
Leblond, J.; Talay, D. 1990: Simulation of diffusion processes with PRESTO building systems like PRESTO with ADAGIO. Cahiers du Centre d'Etudes de Recherche Operationnelle 32(1-3): 121-134
Coulibaly, I.; Lecot, C. 1998: Simulation of diffusion using quasi-random walk methods. Math. Comput. Simul 47(2-5): 153-163
Kim, B.N.; Hiraga, K. 2000: Simulation of diffusional creep accompanied by grain growth in two-dimensional polycrystalline solids. Acta Materialia 48(16): 4151-4159
Gerardi, A.; Marchetti, F.; Rosa, A.M. 1984: Simulation of diffusions with boundary conditions. Systems and Control Letters 4(5): 253-261
Stefanovic, J. 1992: Simulation of digital circuits on the register-transfer level. Computers and Artificial Intelligence 11(6): 585-596
Johnson, A.B. 1991: Simulation of digital transmission over mobile channels at 300 kb/s. IEEE Transactions on Communications 39(4): 619-627
Kim, B.N.; Kishi, T. 1997: Simulation of 2-dimensional grain growth behavior based on an atomic jump model. Nippon Kinzoku Gakkaishi (1952) 61(12): 1341-1346
Deconinck, T.; Mahadevan, S.; Raja, L.L. 2007: Simulation of direct-current surface plasma discharge phenomena in high-speed flow actuation. IEEE Transactions on Plasma Science 35(5): 1301-1311
Mahadevan, S.; Raja, L.L. 2012: Simulation of Direct-Current Surface Plasma Discharges in Air for Supersonic Flow Control. Aiaa Journal 50(2): 325-337
Nouri, S.M.M.; Ale Ebrahim, H.; Jamshidi, E. 2011: Simulation of direct reduction reactor by the grain model. Chemical Engineering Journal (1996) 166(2): 704-709
Klysz, G.; Ferrieres, X.; Balayssac, J.P.; Laurens, S. 2006: Simulation of direct wave propagation by numerical FDTD for a GPR coupled antenna. Ndt and e International 39(4): 338-347
Hacihabiboglu, H.; Gunel, B.; Cvetkovic, Z. 2010: Simulation of Directional Microphones in Digital Waveguide Mesh-Based Models of Room Acoustics. IEEE Transactions on Audio, Speech, and Language Processing 18(2): 213-223
Katz, R.F.; Worster, M.G. 2008: Simulation of directional solidification, thermochemical convection, and chimney formation in a Hele-Shaw cell. Journal of Computational Physics 227(23): 9823-9840
Williams, A.N.; Crull, W.W. 2000: Simulation of directional waves in a numerical basin by a desingularized integral equation approach. Ocean Engineering 27(6): 603-624
Skaugen, T. 2002: Simulation of discharge fields. Iahs-Aish Publ: 341-346
Braun, L.N.; Brun, E.; Durand, Y.; Martin, E.; Tourasse, P. 1994: Simulation of discharge using different methods of meteorological data distribution, basin discretization and snow modelling. Nord. Hydrol 25(1-2): 129-144
Benilov, M.S.; Naidis, G.V. 2003: Simulation of discharges in atmospheric-pressure air sustained by traveling electromagnetic waves. IEEE Transactions on Plasma Science 31(4): 488-494
Hallberg, H.; Wallin, M.; Ristinmaa, M. 2010: Simulation of discontinuous dynamic recrystallization in pure Cu using a probabilistic cellular automaton. Computational Materials Science 49(1): 25-34
Rongyeu, C.H.A.N.G.; Mawling, W.A.N.G. 1985: Simulation of discontinuous population balance equation with integral constraint of growth rate expression. Canadian Journal of Chemical Engineering 63(3): 504-509
Mollenhauer, D.; Ward, L.; Iarve, E.; Putthanarat, S.; Hoos, K.; Hallett, S.; Xiangqian, L.I. 2012: Simulation of discrete damage in composite Overheight Compact Tension specimens. Composites Testing and Model Identification International Conference. Comptest 2011 43(10): 1667-1679
Puig, V.; Saludes, J.; Quevedo, J. 2008: Simulation of discrete linear time-invariant fuzzy dynamic systems. Fuzzy Sets and Systems 159(7): 787-803
Kogure, Y.; Tsuchiya, T.; Hiki, Y. 1987: Simulation of dislocation configuration in rare gas crystals. Journal of the Physical Society of Japan 56(3): 989-998
Gulluoglu, A.N. 1997: Simulation of dislocation configurations in the presence of mobile point defects. Scripta Materialia 36(1): 123-128
Banos, N.; Friedrich, J.; Muller, G. 2008: Simulation of dislocation density : Global modeling of bulk crystal growth by a quasi-steady approach of the Alexander-Haasen concept. Journal of Crystal Growth 310(2): 501-507
Tapasa, K.; Bacon, D.J.; Osetsky, Y.N. 2005: Simulation of dislocation glide in dilute Fe-Cu alloys. Mater. Sci. Eng. A Struct. Mater. Prop. Microstruct. Proces 400-01: 109-113
Mohles, V.; Ronnpagel, D.; Nembach, E. 1999: Simulation of dislocation glide in precipitation hardened materials. International Workshop on Computational Mechanics of Materials : 16(1-4): 144-150
Liming, X.I.O.N.G.; Youping, C.H.E.N.; Lee, J. 2008: Simulation of dislocation nucleation and motion in single crystal magnesium oxide by a field theory. Computational Materials Science 42(1): 168-177
Madec, R.; Devincre, B.; Kubin, L.P. 2002: Simulation of dislocation patterns in multislip : Patterning in crystal plasticity in monotonic deformation. Scripta Materialia 47(10): 689-695
Liu, B.; Eisenlohr, P.; Roters, F.; Raabe, D. 2012: Simulation of dislocation penetration through a general low-angle grain boundary. Acta Materialia 60(13-14): 5380-5390
Simmons, J.P.; Rao, S.I.; Dimiduk, D.M. 1998: Simulation of dislocation single kinks in γ-TiAl using embedded-atom method potentials. Philosophical Magazine Letters 77(6): 327-336
Geipel, T. 1997: Simulation of dislocation source dynamics in silicon for A 60° dislocation. Acta Materialia 45(6): 2639-2653
Raabe, D. 1996: Simulation of dislocation statics by using 3D field equations for dislocation segments in anisotropic media. Zeitschrift für Metallkunde 87(6): 493-497
Fertig, R.S.; Baker, S.P. 2009: Simulation of dislocations and strength in thin films: A review. Prog. Mater. Sci 54(6): 874-908
Roux, S.; Stauffer, D.; Herrmann, H.J. 1987: Simulation of disordered systems of cylinders. I: Geometrical behaviour. Journal de Physique (Paris) 48(3): 341-345
Stauffer, D.; Herrmann, H.J.; Roux, S. 1987: Simulation of disordered systems of cylinders. II: Mechanical behaviour. Journal de Physique (Paris) 48(3): 347-351
Alipchenkov, V.M.; Zaichik, L.I.; Melikhov, O.I. 2001: Simulation of dispersed-annular gas-liquid flows in vertical channels. Thermal Engineering 48(3): 177-185
Srivastava, R.K.; Mcrae, D.S.; Odman, M.T. 2001: Simulation of dispersion of a power plant plume using an adaptive grid algorithm. Atmospheric Environment (1994) 35(28): 4801-4818
Xinlin, L.I.; Baker, D.N.; Temerin, M.; Reeves, G.D.; Belian, R.D. 1998: Simulation of dispersionless injections and drift echoes of energetic electrons associated with substorms. Geophysical Research Letters 25(20): 3763-3766
Bjorkas, C.; Nordlund, K.; Malerba, L.; Terentyev, D.; Olsson, P. 2008: Simulation of displacement cascades in Fe90Cr10 using a two band model potential. Journal of Nuclear Materials 372(2-3): 312-317
Meng, Q.I.N.G.F.E.N.G.; Feng, W.U.W.E.I.; Li, S.H.U.C.H.E.N.G.; Jiao, L.I.C.H.E.N.G. 2005: Simulation of displacement response of capillary and feature extraction for wire bonding process monitoring. Proc. Spie Int. Soc. Opt. Eng: 60411Y.1-60411Y.6
Haque, M.M.; Ahmed, A.K.W.; Sankar, S. 1995: Simulation of displacement sensitive non-linear dampers via integral formulation of damping force characterization. Journal of Sound and Vibration 187(1): 95-109
Linke, J.; Akiba, M.; Bolt, H.; Van der Laan, J.; Nickel, H.; Van Osch, E.; Suzuki, S.; Wallura, E. 1992: Simulation of disruptions on coatings and bulk materials. J. Nucl. Mater 196-98: 607-611
Sopousek, J.; Foret, R.; Jan, V. 2004: Simulation of dissimilar weld joints of steel P91. Science and Technology of Welding and Joining 9(1): 59-64
Batistuta, M.V.; Stella, M.F.; Biagi, H.; Costa, J.C. 2004: Simulation of dissipative electron dynamics in coupled quantum wells. Proc., Electrochem. Soc: 151-156
Popov, V.V. 2002: Simulation of dissolution and coarsening of MnS precipitates in Fe-Si. Philosophical Magazine. A. Physics of Condensed Matter. Structure, Defects and Mechanical Properties 82(1): 17-27
Popov, V.V. 1997: Simulation of dissolution of carbide and nitride precipitates in austenite. Physics of Metals and Metallography 84(4): 349-358
Fan, X.; Masters, I.; Roy, R.; Williams, D. 2007: Simulation of distortion induced in assemblies by spot welding. Proceedings of the Institution of Mechanical Engineers. Part B. Journal of Engineering Manufacture 221(8): 1317-1327
Freund, M.; Shutov, A.V.; Ihlemann, J. 2012: Simulation of distortional hardening by generalizing a uniaxial model of finite strain viscoplasticity. International Journal of Plasticity 36: 113-129
Landex, A.; Nielsen, O.A. 2006: Simulation of disturbances and modelling of expected train passenger delays. International Conference on Computer Aided Design, Manufacture, and Operation in the Railway and other Advanced Mass Transit Systems 10 v 88: 521-529
Duynkerke, P.G.; Hignett, P. 1993: Simulation of diurnal variation in a stratocumulus-capped marine boundary layer during FIRE. Monthly Weather Review 121(12): 3291-3300
Shimizu, K.; Takizuka, T.; Sakurai, S.; Tamai, H.; Takenaga, H.; Kubo, H.; Miura, Y. 2003: Simulation of divertor detachment characteristics in JT-60 with superconducting coils. J. Nucl. Mater 313-16: 1277-1281
Kawashima, H.; Shimizu, K.; Takizuka, T.; Asakura, N.; Takenaga, H.; Nakano, T.; Sakurai, S. 2007: Simulation of divertor pumping in JT-60U with SOLDOR/NEUT2D code. J. Nucl. Mater 363-365: 786-790
Erning, K.; Schafer, D.; Dahmke, A.; Luciano, A.; Viotti, P.; Petrangeli Papini, M. 2011: Simulation of DNAPL distribution depending on groundwater flow velocities using TMVOC. Iahs-Aish Publ 342: 128-131
Grasso, D.; Endicott, D.; Liang, S.; Webe, W.J. 1985: Simulation of DOC removal in activated carbon beds. Journal of Environmental Engineering (New York) 111(2): 237-242
Summers, R.J.; Roberts, P.V. 1985: Simulation of DOC removal in activated carbon beds. Journal of Environmental Engineering (New York) 111(5): 733-735
Mosca, R.; Giribone, P.; Bruzzone, A.G. 2000: Simulation of dock management and planning in a port terminal. International Journal of Modelling and Simulation 20(2): 153-157
Xiaowei, G.U.O.; Jinglei, D.U.; Yongkang, G.U.O.; Chunlei, D.U.; Zheng, C.U.I.; Jun, Y.A.O. 2006: Simulation of DOE fabrication using DMD-based gray-tone lithography. Mne 2005 International Conference on Micro- and Nano-Engineering 83(4-9): 1012-1016
Major, M.; Bottyan, L.; Nagy, D.L. 2002: Simulation of domain formation and domain coarsening in antiferromagnetic multilayers. J. Magn. Magn. Mater 240(1-3): 469-471
Iwai, T.; Hayakawa, H. 1993: Simulation of domain growth in a system with random impurities. Journal of the Physical Society of Japan 62(5): 1583-1596
Saka, C.; Shiiki, K.; Shinagawa, K. 1990: Simulation of domain structure for magnetic thin film in an applied field. Journal of Applied Physics 68(1): 263-268
Ferreira, A.L.C.; Mendiratta, S.K. 1991: Simulation of domain wall dynamics in the SOS approximation of the 2D anisotropic ising model : field-driven case. Journal of Physics. A, Mathematical and General 24(18): 4397-4406
Cywinski, R.; Damm, J.Z. 1994: Simulation of dopant zone-leveling for variable distribution coefficient in KCl:EuCl2 system. Crystal Research and Technology (1979) 29(3): 357-361
Cywinski, R.; Damm, J.Z.; Pozniak, J. 1994: Simulation of dopant zone-leveling in a solid ingot. Crystal Research and Technology (1979) 29(1): 85-91
Smith, R.A. 1986: Simulation of double layers in a model auroral circuit with nonlinear impedance. Geophysical Research Letters 13(8): 809-812
Raeissi, S.; Peters, C.J. 2003: Simulation of double retrograde vaporization using the Peng-Robinson equation of state. Journal of Chemical Thermodynamics 35(4): 573-581
Sharma, Y.; Shoham, O.; Brill, J.P. 1989: Simulation of downhole heater phenomena in the production of wellbore fluids. Spe Annual Technical Conference and Exhibition (Dallas 1987) 4(3): 309-312
Mason, G.; Mellor, D.W. 1995: Simulation of drainage and imbibition in a random packing of equal spheres. Journal of Colloid and Interface Science 176(1): 214-225
Duc Hau, N.G.U.Y.E.N.; Levy, F.; Van Bang, D.P.; Guillou, S.; Kim Dan, N.G.U.Y.E.N.; Chauchat, J. 2012: Simulation of dredged sediment releases into homogeneous water using a two-phase model. Adv. Water Resour 48: 102-112
Cohen, B.I.; Maron, N.; Mccay Nevins, W. 1984: Simulation of drift-cyclotron-loss-cone modes in tandem mirrors with sloshing ions. The Physics of Fluids 27(3): 642-649
Linsen, C.H.O.N.G.; Abbas, M.M.; Medina, A. 2011: Simulation of Driver Behavior with Agent-Based Back-Propagation Neural Network. Transportation Research Record (2249): 44-51
Paksarsawan, S.; May, A.D.; Montgomery, F.O. 1995: Simulation of driver behaviour at junctions in the Bangkok network. Traffic Engineering and Control 36(10): 551-558
Min, S.L.; Holt, R.G.; Apfel, R.E. 1992: Simulation of drop dynamics in an acoustic positioning chamber. Journal of the Acoustical Society of America 91(6): 3157-3165
Soleymani, A.; Laari, A.; Turunen, I. 2008: Simulation of drop formation in a single hole in solvent extraction using the volume-of-fluid method. Chem. Eng. Res. Des 86(7): 731-738
Wang, Y.Y.; Lu, C.; Li, J.; Tan, X.M.; Tse, Y.C. 2005: Simulation of drop/impact reliability for electronic devices. Finite Elements in Analysis and Design 41(6): 667-680
Harada, T.; Suzuki, Y.; Koshizuka, S.; Arakawa, T.; Shoji, S. 2006: Simulation of droplet generation in micro flow using MPS method. Jsme International Journal. Series B, Fluids and Thermal Engineering 49(3): 731-736
Rahman, K.; Ko, J.B.; Khan, S.; Kim, D.S.; Choi, K.H. 2010: Simulation of droplet generation through electrostatic forces. J. Mech. Sci. Technol 24(1): 307-310
Shin, S.; Juric, D. 2009: Simulation of droplet impact on a solid surface using the level contour reconstruction method. Journal of Mechanical Science and Technology 23(9): 2434-2443
Schwartz, L.W.; Eley, R.R. 1998: Simulation of droplet motion on low-energy and heterogeneous surfaces. Journal of Colloid and Interface Science 202(1): 173-188
Shengqiang, S.H.E.N.; Feifei, B.I.; Yali, G.U.O. 2012: Simulation of droplets impact on curved surfaces with lattice Boltzmann method. International Journal of Heat and Mass Transfer 55(23-24): 6938-6943
Quetel, E.; Mullers, J.; Coutellier, D.; Hinterkausen, M. 2008: Simulation of dry and lubricated contacts in multi-body systems. Mecanique and Industries 9(2): 125-131
Pelka, J.; Muller, K.P.; Mader, H. 1988: Simulation of dry etch processes by COMPOSITE. IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems 7(2): 154-159
Galdikas, A.; Pranevicius, L.; Vosylius, J. 1994: Simulation of dry etching through a mask. Vacuum 45(8): 907-913
Giyzeni, H.; Veltkamp, H.J.; Goudriaan, J.; De Bruijn, G.H. 1990: Simulation of dry matter production and distribution and distribution in cassava (Manihot esculenta Crantz). Netherlands Journal of Agricultural Science 38(1): 159-173
Gang, D.E.N.G.; Qingming, X.I.A.; Yuan, X.U.; Qinghua, Z.H.A.N.G. 2009: Simulation of Dry-Spinning Process of Polyimide Fibers. Journal of Applied Polymer Science 113(5): 3059-3067
Kiranoudis, C.T.; Maroulis, Z.B.; Marinoskouris, D. 1994: Simulation of drying processes : an integrated computer-based approach : Process design. Chemical Engineering Research and Design 72(A 3): 307-315
Buban, M.S.; Ziegler, C.L.; Mansell, E.R.; Richardson, Y.P. 2012: Simulation of Dryline Misovortex Dynamics and Cumulus Formation. Monthly Weather Review 140(11): 3525-3551
Malik, A.S. 1998: Simulation of DSM resources as generating units in probabilistic production costing framework. IEEE Transactions on Power Systems 13(4): 1528-1533
Mayes, D.J. 1990: Simulation of DSP devices and systems. Iee Control Engineering Series 42: 211-223
Roy, Y.A.; Dodds, R.H. 2001: Simulation of ductile crack growth in thin aluminum panels using 3-D surface cohesive elements. International Journal of Fracture 110(1): 21-45
Pirondi, A.; Fersini, D. 2009: Simulation of ductile crack growth in thin panels using the crack tip opening angle. Eng. Fract. Mech 76(1): 88-100
Dunbar, A.; Wang, X.; Tyson, W.R.; Xu, S. 2014: Simulation of ductile crack propagation and determination of CTOAs in pipeline steels using cohesive zone modelling. Fatigue and Fracture of Engineering Materials and Structures 37(6): 592-602
Hello, G.; Kebir, H.; Rassineux, A.; Chambon, L. 2012: Simulation of ductile tearing by the BEM with 2D domain discretization and a local damage model. Engineering Analysis with Boundary Elements 36(4): 527-536
Gatsonis, N.A.; Erlandson, R.E.; Meng, C.I. 1994: Simulation of dusty plasmas near surfaces in space. Journal of Geophysical Research 99(A 5): 8479-8489
Batzias, F.; Sidiras, D.; Schroeder, E.; Weber, C. 2009: Simulation of dye adsorption on hydrolyzed wheat straw in batch and fixed-bed systems. Chemical Engineering Journal (1996) 148(2-3): 459-472
Gagliardi, A.; Auf der Maur, M.; Gentilini, D.; Di Carlo, A. 2011: Simulation of dye solar cells: through and beyond one dimension. Journal of Computational Electronics 10(4): 424-436
Choi, J.H.; Lee, J.Y.; Yoo, C.D. 2001: Simulation of dynamic behavior in a GMAW system. Welding Journal 80(10): 239.s-245.s
Landreau, T. 1989: Simulation of dynamic behavior of a four wheel steering vehicle by means of a vehicle and driver model. Sae Transactions 98(6): 57-62
Inui, T.; Nakazaki, Y. 1991: Simulation of dynamic behaviors of benzene and toluene inside the pores of ZSM-5 zeolite. Zeolites 11(5): 434-437
Nakazaki, Y.; Goto, N.; Inui, T. 1992: Simulation of dynamic behaviors of simple aromatic hydrocarbons inside the pores of a pentasil zeolite. Journal of Catalysis 136(1): 141-148
Shinoda, E.; Yamamoto, T.; Fukui, K.; Yun, C.M.; Yoshida, H. 1999: Simulation of dynamic characteristics of closed-circuit pulverization system. Kagaku Kogaku Ronbunshu 25(1): 59-65
Xiaofeng, W.A.N.G.; Xiaoge, Z.H.A.N.G. 2010: Simulation of dynamic cornering fatigue test of a steel passenger car wheel. International Journal of Fatigue 32(2): 434-442
Rafiee, S.; Seelig, T.; Gross, D. 2003: Simulation of dynamic crack curving and branching under biaxial loading by a time domain boundary integral equation method. International Journal of Fracture 120(3): 545-561
Daphalapurkar, N.P.; Hongbing, L.U.; Coker, D.; Komanduri, R. 2007: Simulation of dynamic crack growth using the generalized interpolation material point (GIMP) method. International Journal of Fracture 143(1): 79-102
Anvari, M.; Scheider, I.; Thaulow, C. 2006: Simulation of dynamic ductile crack growth using strain-rate and triaxiality-dependent cohesive elements. Engineering Fracture Mechanics 73(15): 2210-2228
Shi, X.M.; Cai, C.S. 2009: Simulation of Dynamic Effects of Vehicles on Pavement Using a 3D Interaction Model. Journal of Transportation Engineering 135(10): 736-744
Bardenhagen, S.G.; Nairn, J.A.; Hongbing, L.U. 2011: Simulation of dynamic fracture with the Material Point Method using a mixed J-integral and cohesive law approach. International Journal of Fracture 170(1): 49-66
Xinggao, S.H.U.; Wilson, N. 2008: Simulation of dynamic gauge widening and rail roll : effects on derailment and rolling contact fatigue. Symposium of the International Association for Vehicle System Dynamics 46: 981-994
Mahendra Singh, S.O.D.H.A. 2001: Simulation of dynamic heat transfer between ground and underground structures. International Journal of Energy Research 25(15): 1391-1394
Kassa, E.; Andersson, C.; Nielsen, J.C.O. 2006: Simulation of dynamic interaction between train and railway turnout. Vehicle System Dynamics 44(3): 247-258
Smirnov, A.G. 1998: Simulation of dynamic interaction of ultrashort pulses with nonlinear band-gap structure by direct time integration methods. Optics Communications 158(1-6): 343-350
Kasal, R.B.; De Andrade, R.; Sotelo, G.G.; Ferreira, A.C. 2007: Simulation of dynamic levitation force taking flux creep into account. Ieee Trans. Appl. Supercond 17(2): 2158-2161
Tadeu, A.; Simoes, I.; Simoes, N.; Prata, J. 2011: Simulation of dynamic linear thermal bridges using a boundary element method model in the frequency domain. Energy and Buildings 43(12): 3685-3695
Guyennet, H.; Herrmann, B.; Philippe, L.; Spies, F. 1997: Simulation of dynamic load-balancing algorithms for multicomputers. International Journal of Mini and Microcomputers 19(2): 70-76
Hwang, E.S.; Nowak, A.S. 1991: Simulation of dynamic load for bridges - Simulation des charges dynamiques s'exerçant sur les ponts. Journal of Structural Engineering (New York) 117(5): 1413-1434
Katta, V.R.; Roquemore, W.M. 1998: Simulation of dynamic methane jet diffusion flames using finite rate chemistry models. Aiaa Journal 36(11): 2044-2054
Bonfatti, F.; Gadda, G.; Monari, P.D. 1994: Simulation of dynamic phenomena by cellular automata. Computers and Graphics 18(6): 831-836
Li, J.; Xu, H.; Mattila, T.T.; Kivilahti, J.K.; Laurila, T.; Paulastokrockel, M. 2010: Simulation of dynamic recrystallization in solder interconnections during thermal cycling. Computational Materials Science 50(2): 690-697
Yanqiu, Z.H.A.N.G.; Shuyong, J.I.A.N.G.; Yulong, L.I.A.N.G.; Li, H.U. 2013: Simulation of dynamic recrystallization of NiTi shape memory alloy during hot compression deformation based on cellular automaton. Computational Materials Science 71: 124-134
Savsar, M. 1999: Simulation of dynamic resource allocation policies in transfer lines with serial duplicate stations. Simulation (San Diego, Calif.) 72(6): 391-400
Ai, H.A.; Ahrens, T.J. 2006: Simulation of dynamic response of granite : A numerical approach of shock-induced damage beneath impact craters. Int. J. Impact Eng 33(1-12): 1-10
Tahmeen, M.; Muto, T.; Yamada, H. 2001: Simulation of dynamic responses of tapered fluid lines. Jsme International Journal. Series B, Fluids and Thermal Engineering 44(2): 247-254
Rubio, A.M.; Lodge, J.F.M.; Freire, J.J. 2002: Simulation of dynamic scattering from homopolymer and symmetric diblock copolymer solutions with the bond fluctuation model. Macromolecules 35(13): 5295-5303
Federico, A.; Kaufmann, G.H.; Galizzi, G.E.; Rabal, H.; Trivi, M.; Arizaga, R. 2006: Simulation of dynamic speckle sequences and its application to the analysis of transient processes. Optics Communications 260(2): 493-499
Akbari, M.H.; Price, S.J. 2003: Simulation of dynamic stall for a NACA 0012 airfoil using a vortex method. Journal of Fluids and Structures 17(6): 855-874
Osswald, G.A.; Ghia, K.N.; Ghia, U. 1991: Simulation of dynamic stall phenomenon using unsteady Navier-Stokes equations. Computer Physics Communications 65(1-3): 209-218
Qiuliang, W.A.N.G.; Cheon Seong, Y.O.O.N.; Baang, S.; Kim, K.; Chung, W. 2003: Simulation of dynamic stress in PF Superconducting magnets for KSTAR under normal operating conditions. Ieee Trans. Appl. Supercond 13(2): 1488-1491
Jeandel, A.; Briand, P.; Pontiggia, P. 1997: Simulation of dynamic technical systems for gas utilisations - La simulation de systèmes techniques dynamiques au service des utilisations. Gaz d'Aujourd'hui (Paris) 121(5-6): 398-403
Nielsen, J.C.O.; Oscarsson, J. 2004: Simulation of dynamic train-track interaction with state-dependent track properties. Journal of Sound and Vibration 275(3-5): 515-532
Junghsen, L.I.E.H.; Weigang, Q.I. 1995: Simulation of dynamic truck loading on pavements using measured road roughness. Transportation Research Board Trb. Annual Meeting (1995) (1501): 13-21
Torstensson, P.T.; Nielsen, J.C.O. 2011: Simulation of dynamic vehicle-track interaction on small radius curves. Veh. Syst. Dyn 49(8-12): 1711-1732
Pietsch, U. 1984: Simulation of dynamical bond charge transfer properties in elemental semiconductors by means of a simple quantum-mechanical model. Physica Status Solidi. B. Basic Research 126(2): 595-605
Hasenfratz, A.; Knechtli, F. 2002: Simulation of dynamical fermions with smeared links. Computer Physics Communications 148(1): 81-86
Baturin, D.M.; Strashnykh, V.P.; Vygovskii, S.B. 1999: Simulation of dynamical processes in an RBMK reactor using a full-scale simulator. Atomic Energy (New York, N.Y.) 87(3): 640-645
Orfao, J.J.M.; Figueiredo, J.L. 1993: Simulation of dynamical thermogravimetric curves : single and complex reactions. Thermochimica Acta 217: 151-173
Wong, D.S.H.; Jang, S.S.; Chang, C.F. 1991: Simulation of dynamics and phase pattern changes for an azeotropic distillation column. Computers and Chemical Engineering 15(5): 325-335
Keskinen, M.J.; Ganguli, G. 1996: Simulation of dynamics and structure in the black aurora. Journal of Geophysical Research 101(A 12): 26995-26999
Zima, W. 2006: Simulation of dynamics of a boiler steam superheater with an attemperator. Proceedings of the Institution of Mechanical Engineers. Part A. Journal of Power and Energy 220(7): 793-801
Song, Y.; Hartwigsen, C.J.; Mcfarland, D.M.; Vakakis, A.F.; Bergman, L.A. 2004: Simulation of dynamics of beam structures with bolted joints using adjusted Iwan beam elements. Journal of Sound and Vibration 273(1-2): 249-276
Nowak, L.A. 1998: Simulation of dynamics of electromagnetic driving device for comet ground penetrator. Ieee Trans. Magn 34(5): 3146-3149
Goyal, S.; Pinson, E.N.; Sinden, F.W. 1994: Simulation of dynamics of interacting rigid bodies including friction. I: General problem and contact model. Engineering with Computers 10(3): 162-174
Goyal, S.; Pinson, E.N.; Sinden, F.W. 1994: Simulation of dynamics of interacting rigid bodies including friction. II: Software system design and implementation. Engineering with Computers 10(3): 175-195
Walde, T.; Riedel, H. 2007: Simulation of earing during deep drawing of magnesium alloy AZ31. Acta Materialia 55(3): 867-874
Lin, D.W.; Daniel, D.; Jonas, J.J. 1991: Simulation of earing in textured materials. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 131(2): 161-170
Tikhovskiy, I.; Raabe, D.; Roters, F. 2008: Simulation of earing of a 17% Cr stainless steel considering texture gradients. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 488(1-2): 482-490
Engler, O.; Kalz, S. 2004: Simulation of earing profiles from texture data by means of a visco-plastic self-consistent polycrystal plasticity approach. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 373(1-2): 350-362
Fallah, V.; Oforiopoku, N.; Stolle, J.; Provatas, N.; Esmaeili, S. 2013: Simulation of early-stage clustering in ternary metal alloys using the phase-field crystal method. Acta Materialia 61(10): 3653-3666
Huang, F.U.Y.U.; Li, G.A.N.G.; Shen, H.O.N.G.B.I.N. 2010: Simulation of earth background radiation characteristic for satellite borne laser warning system. Optics Communications 283(18): 3415-3418
Park, Y.S.; Hwang, Y.S. 2008: Simulation of ECCD optimization for neoclassical tearing mode suppression in KSTAR. Iaea Tm on Control, Data Acquisition, and Remote Participation for Fusion Research 83(2-3): 207-210
Roovers, P.; Ozer, J.; Mommaerts, J.P.; Adam, Y. 1984: Simulation of ecological impacts of the new outer-harbour development in Zeebrugge - Simulation de l'impact écologique crée par le développement du nouveau port avancé de Zeebrugge. Water Science and Technology 16(3-4): 441-446
Malkinapykh, I.G.; Pykh, Y.A. 1998: Simulation of ecological processes using response functions method. Ecosummit Meeting 1 108(1-3): 199-218
Koch, S.; De Gersem, H.; Fischer, E.; Moritz, G.; Weiland, T. 2006: Simulation of eddy-current losses in a fast ramped superconductive dipole magnet. Ieee Trans. Appl. Supercond 16(2): 334-337
Rem, P.C.; Beunder, E.M.; Van den Akker, A.J. 1998: Simulation of eddy-current separators. Ieee Trans. Magn 34(4): 2280-2286
Rao, B.P.C.; Babu Rao, C.; Jayakumar, T.; Raj, B. 1996: Simulation of eddy current signals from multiple defects. Ndt E Int 29(5): 269-273
Oguz, T.; Salihoglu, B. 2000: Simulation of eddy-driven phytoplankton production in the Black Sea. Geophysical Research Letters 27(14): 2125-2128
Qian, C.F.; Li, H.F.; Jiang, Z.J.; Fan, D.S. 2005: Simulation of edge dislocation emission from a crack under in-plane shear. Theoretical and Applied Fracture Mechanics 43(3): 369-375
Cassidy, J.; Jamal, G.H.O.R.O.G.H.C.H.I.A.N.; Sarfarazi, F.; Pons, S. 1985: Simulation of edge effects in electroanalytical experiments by orthogonal collocation. V: Chronoamperometry at ultramicroelectrode ensembles. Canadian Journal of Chemistry 63(12): 3577-3581
Cassidy, J.; Ghoroghchian, J.; Sarfarazi, F.; Smith, J.J.; Pons, S. 1986: Simulation of edge effects in electroanalytical experiments by orthogonal collocation. VI: Cyclic voltammetry at ultramicroelectrode ensembles. Electrochimica Acta 31(6): 629-636
Khan, R.; Mizuguchi, N.; Hayashi, T. 2006: Simulation of edge-localized modes in a spherical tokamak : effects of ion diamagnetic drift. J. Plasma Phys 72: 883-886
Kim, S.Y.; Sasaki, Y. 2010: Simulation of Effect of Pore Structure on Coke Strength Using 3-dimensional Discrete Element Method. Isij International 50(6): 813-821
Dyskin, V.G. 2002: Simulation of effective selective coatings. Applied Solar Energy 38(1): 41-44
Sawada, S.; Hazama, Y.; Hayakawa, T.; Totsuka, T. 1989: Simulation of effects of atmospheric ethylene on tree leaf shedding. Environmental Pollution (1987) 61(3): 173-185
Hill, F.; Gough, D.; Merryfield, W.J.; Toomre, J. 1991: Simulation of effects of atmospheric seeing on the observation of high-degree solar oscillations. The Astrophysical Journal 369(1): 237-246
Mingfu, L.I.; Yu, P.Y.; Weber, E.R. 1991: Simulation of effects of uniaxial stress on the deep level transient spectroscopy spectra of the DX center in AlGaAs alloys. Applied Physics Letters 59(10): 1197-1199
Yi, L.I.U.; Ali, A.; Reitz, R.D. 2004: Simulation of effects of valve pockets and internal residual gas distribution on HSDI diesel combustion and emissions. Sae Transactions 113(3): 207-223
Yixiang, S.H.I.; Ningsheng, C.A.I.; Zongqiang, M.A.O. 2012: Simulation of EIS spectra and polarization curves based on Ni/YSZ patterned anode elementary reaction models. International Journal Hydrogen (Ijhe). Conference (11 ; 2012) 37(1): 1037-1043
Esau, I. 2004: Simulation of Ekman boundary layers by large eddy model with dynamic mixed subfilter closure. Environmental Fluid Mechanics (2001) 4(3): 273-303
Tett, S. 1995: Simulation of El Niño-Southern Oscillation-like variability in a global AOGCM and its response to CO2 increase. Journal of Climate 8(6): 1473-1502
Hutnik, M.; Argon, A.S.; Suter, U.W. 1993: Simulation of elastic and plastic response in the glassy polycarbonate of 4,4'-isopropylidenediphenol. Macromolecules 26(5): 1097-1108
Tatarnikov, O.V.; Rusin, M.Y.; Vorobev, S.B.; Prosolov, A.N. 2009: Simulation of Elastic Behavior of Organic-Silicon Sealants at Large Deformations. Polymer Science. Series D 2(2): 136-139
Yilbas, B.S.; Arif, A.F.M.; Shuja, S.Z. 2001: Simulation of elastic displacement of surface during laser short pulse heating of gold. Optical and Quantum Electronics 33(12): 1241-1258
Luoding, Z.H.U.; Chin, R.C.Y. 2008: Simulation of elastic filaments interacting with a viscous pulsatile flow. Computer Methods in Applied Mechanics and Engineering 197(25-28): 2265-2274
Makarov, P.V.; Schmauder, S.; Hu, S.; Ludwig, M.; Cherepanov, O.I.; Smolin, I.Y.; Romanova, V.A.; Balokhonov, R.R.; Saraev, D.Y.; Soppa, E.; Kizler, P.; Fischer, G. 2001: Simulation of elastic-plastic deformation and fracture of materials at micro-, meso- and macrolevels. Theoretical and Applied Fracture Mechanics 37(1-3): 183-244
Jin, Y.; Yuan, F.G. 2003: Simulation of elastic properties of single-walled carbon nanotubes. Composites Science and Technology 63(11): 1507-1515
Brunner, D.; Junge, M.; Gaul, L. 2009: Simulation of elastic scattering with a coupled FMBE-FE approach. Transactions On The Built Environment v. 105: 137-148
Carlson, W.B.; Kahn, M. 1989: Simulation of elastic stresses and polarization in piezoelectric ceramic by the finite difference method. Ferroelectrics 99: 165-172
Andriyevsky, B.; Romanyuk, M.; Stadnyk, V. 2009: Simulation of elasto optical properties of K2SO4 crystals. The Journal of Physics and Chemistry of Solids 70(7): 1109-1112
Romanova, V.; Balokhonov, R.; Makarov, P.; Schmauder, S.; Soppa, E. 2003: Simulation of elasto-plastic behaviour of an artificial 3D-structure under dynamic loading. Iwcmm 12 International Workshop on Computational Mechanics of Materials 28(3-4): 518-528
Kweh, C.C.; Patching, M.J.; Evans, H.P.; Snidle, R.W. 1992: Simulation of elastohydrodynamic contacts between rough surface. J. Tribol 114(3): 412-419
Hainan, W.A.N.G.; Varghese, J.; Pilon, L. 2011: Simulation of electric double layer capacitors with mesoporous electrodes: Effects of morphology and electrolyte permittivity. Electrochimica Acta 56(17): 6189-6197
Pedersen, T.; Brown, R.C. 1993: Simulation of electric field effects in premixed methane flames. Combustion and Flame 94(4): 433-448
Pralas, J.; Kalic, D. 1987: Simulation of electric resistance furnace operation by means of numerical modelling: possibilities and limitations. Archiv für Elektrotechnik (Berlin) 70(6): 425-432
Droval, G.; Glouannec, P.; Feller, J.F.; Salagnac, P. 2005: Simulation of electrical and thermal behavior of conductive polymer composites heating elements. Journal of Thermophysics and Heat Transfer 19(3): 375-381
Chang, Y.H.; Syu, R.H. 2010: Simulation of electrical characteristics of InP double-heterojunction bipolar transistors with InGaAsSb base. Microelectronics and Reliability 50(1): 70-74
Raju, G.R.G.; Liu, J. 1995: Simulation of electrical discharges in gases : nonuniform electric fields. IEEE Transactions on Dielectrics and Electrical Insulation 2(5): 1016-1041
Raju, G.R.G.; Liu, J. 1995: Simulation of electrical discharges in gases : uniform electric fields. IEEE Transactions on Dielectrics and Electrical Insulation 2(5): 1004-1015
Vajda, I.; Semperger, S. 2005: Simulation of electrical, magnetic and thermal properties of inductive fault current limiters made of YBCO ceramic superconductors. J. Eur. Ceram. Soc 25(12): 2925-2929
Ishikawa, M.; Kishimoto, K.; Fukutomi, S.; Umoto, J. 1987: Simulation of electrical nonuniformities in diagonal type MHD generators. Energy Conversion and Management 27(2): 261-265
Diaz, C.H.; Sungmo, K.A.N.G.; Charvaka, D.U.V.V.U.R.Y. 1994: Simulation of electrical overstress thermal failures in integrated circuits. Ieee Trans. Electron Devices 41(3): 359-366
Hagenbeck, R.; Waser, R. 1997: Simulation of electrical properties of grain boundaries in titanate ceramics. Ber. Bunsen-Ges 101(9): 1238-1241
Kondo, A. 1999: Simulation of electrical properties of recrystallized SiC. Nippon Seramikkusu Kyokai Gakujutsu Ronbunshi 107(9): 791-795
Zhimin, X.I.E.; Yum, Y.J.; Lee, C.K. 2007: Simulation of electrical resistivity of carbon black filled rubber under elongation. Journal of Macromolecular Science. Physics 46(3): 561-567
Karafyllidis, I.; Danikas, M.G.; Thanailakis, A.; Bruning, A.M. 1998: Simulation of electrical tree growth in solid insulating materials. Electrical Engineering (Berlin) 81(3): 183-192
Gracheva, M.E.; Leburton, J.P. 2008: Simulation of electrically tunable semiconductor nanopores for ion current/single bio-molecule manipulation. Journal of Computational Electronics 7(1): 6-9
Fan, T.H.; Mayle, E.J.; Kottke, P.A.; Fedorov, A.G. 2006: Simulation of electroanalysis using the boundary integral method. Trac. Trends in Analytical Chemistry (Regular Ed.) 25(1): 52-65
Damaskin, B.B.; Baturina, O.A.; Grafov, B.M. 1998: Simulation of electrochemical impedance spectra of amalgam electrodes in contact with mixed electrolyte solutions containing electroactive cations. Russian Journal of Electrochemistry 34(1): 87-91
Emekli, U.; West, A.C. 2010: Simulation of electrochemical nucleation in the presence of additives under galvanostatic and pulsed plating conditions. Electrochimica Acta 56(2): 977-984
Lovric, M. 1996: Simulation of electrochemical problems by numerical integration. Russian Journal of Electrochemistry 32(9): 988-995
Aoki, K. 1994: Simulation of electrochemical slow relaxation at electrically conducting polymer-coated electrodes based on the concept of percolation. Journal of Electroanalytical Chemistry (1992) 373(1-2): 67-73
Pastore, P.; Magno, F.; Collinson, M.M.; Wightman, R.M. 1995: Simulation of electrochemiluminescence produced by a high-frequency square-wave potential waveform. Effects of ohmic drop and cell time constant on electrode potential, current and light emission. Journal of Electroanalytical Chemistry (1992) 397(1-2): 19-26
Matthews, J.P.; Bell, J.M.; Skryabin, I.L. 2001: Simulation of electrochromic switching voltages at elevated temperatures. Ime-4 International Meeting on Electrochromism 46(13-14): 1957-1961
Yaoming, W.A.N.G.; Anlei, W.A.N.G.; Xu, Z.H.A.N.G.; Tongwen, X.U. 2011: Simulation of Electrodialysis with Bipolar Membranes: Estimation of Process Performance and Energy Consumption. Industrial and Engineering Chemistry Research 50(24): 13911-13921
Sabur, R.; Matin, M. 2005: Simulation of electrokinetic flow in microfluidic channels. Proc. Spie Int. Soc. Opt. Eng: 59070Z.1-59070Z.12
Smy, T.; Tan, L.; Dew, S.K.; Brett, M.J.; Shochamdiamand, Y.; Desilva, M. 1997: Simulation of electroless deposition of Cu thin films for very large scale integration metallization. Journal of the Electrochemical Society 144(6): 2115-2122
Sotskaya, N.V.; Aristov, I.V.; Goncharova, L.G.; Kravchenko, T.A. 1997: Simulation of electroless plating of nickel with sodium hypophosphite. Russian Journal of Applied Chemistry 70(3): 407-409
Ahmed Essam Ahmed Nabawy, M.O.R.R.A.; Wageh Mohammed, S.W.E.L.M.; Atef Elsayed Abou, E.L.A.Z.M. 2011: Simulation of electroluminescence of quantum dot-based microcavity light-emitting device. Optical and Quantum Electronics 42(5): 285-296
Saadsaoud, Z.; Williamson, A.C. 1998: Simulation of electromagnetic drive systems using graph theory. Iee Proceedings. Electric Power Applications 145(4): 393-400
Sugiyama, D.; Nambu, M.; Sakai, J.I. 2001: Simulation of electromagnetic emission near the plasma frequency from relativistic electron beams. Journal of the Physical Society of Japan 70(4): 977-982
Sun, K.; Oneill, K.; Shubitidze, F.; Haider, S.A.; Paulsen, K.D. 2002: Simulation of electromagnetic induction scattering from targets with negligible to moderate penetration by primary fields. IEEE Transactions on Geoscience and Remote Sensing 40(4): 910-927
Piriou, F.; Razek, A. 1989: Simulation of electromagnetic systems by coupling of magnetic and electric equations. Mathematics and Computers in Simulation 31(3): 189-194
Lei, L.I.U.; Xiang, C.U.I.; Lei, Q.I. 2009: Simulation of Electromagnetic Transients of the Bus Bar in Substation by the Time-Domain Finite-Element Method. IEEE Transactions on Electromagnetic Compatibility 51(4): 1017-1025
Zhang, Y.; Wang, Z.; Cheeke, J.D.N. 2000: Simulation of electromechanical coupling coefficient by modified modal frequency spectrum method including the electrode effect. Ui'99/Wcu 99 Ultrasonics International Conference Joint with World Congress on Ultrasonics 38(1-8): 114-117
Wolters, J.; Roedig, M.; Breitbach, G.; Nickel, H. 1995: Simulation of electromechanical loads on first wall mock-ups. Isfnt-3 : International Symp Osium on Fusion Nuclear Technology 27: 522-527
Scherge, M.; Breternitz, V.; Knedlik, C. 1992: Simulation of electromigration behaviour in A1 metallization of integrated circuits. Microelectronics and Reliability 32(1-2): 21-24
Munnix, S.; Bimberg, D. 1987: Simulation of electron beam induced current at GaAs/AlGaAs heterojunctions under forward bias. Applied Physics Letters 51(25): 2121-2123
Scheer, R. 1995: Simulation of electron-beam-induced-current profiles for thin-film heterojunction analysis. Philosophical Magazine. B. Physics of Condensed Matter. Structural, Electronic, Optical and Magnetic Properties 72(1): 75-80
Zheng, C.Y.; Liu, Z.J.; Zhan, A.Q.; Zhu, G.S.P.; He, X.T. 2006: Simulation of electron beam instabilities in collisionless plasmas. Journal of Plasma Physics 72: 249-258
Hubbard, R.F.; Slinker, S.P.; Fernsler, R.F.; Joyce, G.; Lampe, M. 1993: Simulation of electron-beam transport in low-pressure gas conditioning cells. Journal of Applied Physics 73(9): 4181-4196
Yamagiwa, M.; Bulanov, S.V.; Esirkepov, T.Z.; Koga, J.; Kando, M.; Ueshima, Y.; Saito, K.; Wakabayashi, D. 2006: Simulation of electron bunch generation by an ultrashort-pulse high-intensity laser-driven wakefield. International Laser Physics Workshop 16(2): 252-258
Winkelmann, A.; Schroter, B.; Richter, W. 2003: Simulation of electron channelling patterns for in situ polytype analysis of silicon carbide films. Ecoss-21 European Conference on Surface Science 532-535: 869-874
Delatorre, P.; Filgueira de Azevedo, W. 2001: Simulation of electron density maps for two-dimensional crystal structures using Mathematica. Journal of Applied Crystallography 34: 658-660
Treacy, M.M.J.; Newsam, J.M.; Deem, M.W. 1993: Simulation of electron diffraction patterns from partially ordered layer lattices. Ultramicroscopy 52(3-4): 512-522
Akbay, T.; Aydinol, K.; Bor, A.S. 1994: Simulation of electron diffraction patterns of alloys with oriented precipitates. Journal of Applied Crystallography 27: 379-384
Newbury, D.E.; Myklebust, R.L. 2005: Simulation of electron-excited X-ray spectra with NIST-NIH Desktop Spectrum Analyzer (DTSA). Surf. Interface Anal 37(11): 1045-1053
Cavalcoli, D.; Matteucci, G.; Muccini, M. 1995: Simulation of electron holographic contour maps of linear charged dislocations. Ultramicroscopy 57(4): 385-390
Hunt, D.F.; Gale, P.J. 1984: Simulation of electron impact mass spectra by charge exchange in chemical ionization mass spectrometry. Analytical Chemistry 56(7): 1111-1114
Kolobov, V.I.; Arslanbekov, R.R. 2006: Simulation of electron kinetics in gas discharges. Ieee Trans. Plasma Sci 34(3): 895-909
Heinrich, H.; Kral, F.; Kostorz, G. 1997: Simulation of electron microscope dislocation images in cubic and non-cubic structures. Icsma 11: International Conference on the Strength of Materials 234-236: 347-350
Rajendran, K. 1991: Simulation of electron motion in a single valley semiconductor : GaAs. Materials Chemistry and Physics 28(3): 321-330
Salvat, F. 1998: Simulation of electron multiple elastic scattering. Radiation Physics and Chemistry (1993) 53(3): 247-256
Liping, W.A.N.G.; Rouse, J.; Haoning, L.I.U.; Munro, E.; Xieqing, Z.H.U. 2004: Simulation of electron optical systems by differential algebraic method combined with Hermite fitting for practical lens fields. International Conference on Micro and Nano Engineering 73-74: 90-96
Frost, B.G.; Rodrigues, R.P.; Dravid, V.P. 1999: Simulation of electron phase shifts by electrostatic potential across electroceramic interfaces. Journal of Physics. D, Applied Physics 32(14): 1734-1738
Borisov, S.S.; Zaitsev, S.I.; Grachev, E.A.; Ivanov, N. 2006: Simulation of electron scattering in thin films using Monte-Carlo method in discrete looses approximation. All-Russian Seminar on Problems of Theoretical and Applied Electron and Ion Optics: 62780I.1-62780I.4
Smekal, W.; Werner, W.S.M.; Powell, C.J. 2005: Simulation of electron spectra for surface analysis (SESSA) : a novel software tool for quantitative Auger-electron spectroscopy and X-ray photoelectron spectroscopy. Surf. Interface Anal 37(11): 1059-1067
Werner, W.S.M. 2005: Simulation of electron spectra for surface analysis using the partial-intensity approach (PIA). Surf. Interface Anal 37(11): 846-860
Dincer, M.S. 1993: Simulation of electron swarms in SF6 in uniform E x B fields. Journal of Physics. D, Applied Physics 26(9): 1427-1431
Fatemeh Khodadadi, A.Z.A.D.B.O.N.I.; Sedaghatizade, M. 2010: Simulation of Electron Trajectories in the Multicusp Ion Source Using Geantn4 Monte Carlo Code. Journal of Fusion Energy 29(2): 150-156
Entinzon, I.R.; Isarova, E.V. 1995: Simulation of electron transmission through a subtance taking into account multiple scattering. Radiation Physics and Chemistry (1993) 46(1): 3-9
Greilich, S.; Murray, A.S.; Btterjensen, L. 2008: Simulation of electron transport during beta irradiation. Radiat. Meas 43(2-6): 748-751
Sadi, T.; Kelsall, R.; Pilgrim, N. 2006: Simulation of electron transport in InGaAs/AlGaAs HEMTs using an electrothermal monte carlo method. Ieee Trans. Electron Devices 53(8): 1768-1774
Palov, A.P.; Pletnev, V.V.; Telkovskii, V.B. 1992: Simulation of electron transport in plasmas and solids. J. Nucl. Mater 196-98: 816-818
Weingartner, B.; Rotter, S.; Burgdorfer, J. 2005: Simulation of electron transport through a quantum dot with soft walls. Physical Review B. Condensed Matter and Materials Physics 72(11): 115342.1-115342.9
Hyuck In, K.W.O.N.; Ravaioli, U. 2006: Simulation of electronic/ionic mixed conduction in solid ionic memory devices. Microelectronics Journal 37(10): 1047-1051
Gritsenko, V.A.; Novikov, Y.N.; Morokov, Y.N.; Wong, H. 1998: Simulation of electronic structure of Si-Si bond traps in oxide/nitride/oxide structure. Microelectronics and Reliability 38(9): 1457-1464
Lepage, H.; Kaminskicachopo, A.; Poncet, A.; Le Carval, G. 2012: Simulation of Electronic Transport in Silicon Nanocrystal Solids. Journal of Physical Chemistry. C 116(20): 10873-10880
Bourgault, Y.; Ethier, M.; Leblanc, V.G. 2003: Simulation of electrophysiological waves with an unstructured finite element method. Modelisation Mathematique et Analyse Numerique 37(4): 649-661
Kwo Ray, C.H.U.; Linghsiao, L.Y.U. 1986: Simulation of electrostatic noise amplification in gyrotrons. IEEE Transactions on Microwave Theory and Techniques 34(6): 690-695
De Leeuw, S.W.; Perram, J.W.; Smith, E.R. 1983: Simulation of electrostatic systems in periodic boundary conditions. III: Further theory and applications. Proceedings of the Royal Society of London, Series a : Mathematical and Physical Sciences 388(1794): 177-193
Dew, S.K.; Smy, T.; Brett, M.J. 1992: Simulation of elevated temperature aluminum metallization using SIMBAD. Ieee Trans. Electron Devices 39(7): 1599-1606
Huisman, L.M. 1990: Simulation of embedded memories by defective hashing. IBM Journal of Research and Development 34(2-3): 289-298
Hassapis, G. 1992: Simulation of embedded VME multiprocessors. Microprocessing and Microprogramming 33(5): 253-260
Chubar, O. 2006: Simulation of emission and propagation of coherent synchrotron radiation wave fronts using the methods of wave optics. Wirms 2005 International Workshop on Infrared Microscopy and Spectroscopy with Accelerator-Based Sources 49(1-2): 96-103
Plisyuk, S.A.; Batrak, D.V.; Drakin, A.E.; Bogatov, A.P. 2006: Simulation of emission characteristics and optimisation of waveguiding parameters of a ridge semiconductor heterolaser to maximise the emission brightness. Quantum Electronics (Woodbury) 36(11): 1058-1064
Taniyama, H.; Tomizawa, M.; Yoshii, A. 1995: Simulation of emitter size effects in the coupled-quantum-well base resonant tunneling transistor. Jpn. J. Appl. Phys 34(2B): 1232-1235
Fang, G.A.O.; Yates, S.R. 1998: Simulation of enclosure-based methods for measuring gas emissions from soil to the atmosphere. Journal of Geophysical Research 103(D 20): 26127-26136
Berezkin, A.V.; Kudryavtsev, Y.V. 2011: Simulation of End-Coupling Reactions at a Polymer-Polymer Interface: The Mechanism of Interfacial Roughness Development. Macromolecules 44(1): 112-121
Jalili Saffar, R.; Razfar, M.R. 2010: Simulation of End Milling Operation for Predicting Cutting Forces to Minimize Tool Deflection by Genetic Algorithm. Machining Science and Technology 14(1): 81-101
Xingqiu, Y.U.A.N.; Cairns, I.H.; Robinson, P.A. 2007: Simulation of Energetic Electron Bursts Upstream of Re-Forming Shocks. The Astrophysical Journal 671(1): 439-446
Alajmi, F.F.; Hanby, V.I. 2008: Simulation of energy consumption for Kuwaiti domestic buildings. Energy and Buildings 40(6): 1101-1109
Lei, J.; Gao, F.; Xu, G. 2006: Simulation of energy consumption for quadruped walking vehicle. Proc. Spie Int. Soc. Opt. Eng: 63584Z.1-63584Z.6
Glukhov, R.A.; Belsky, A.N.; Pedrini, C.; Vasilev, A.N. 1998: Simulation of energy conversion and transfer in CeF3 after VUV photon absorption. J. Alloys Compd 275-77: 488-492
Iwai, H.; Oiwa, R.; Larson, P.E.; Kudo, M. 1997: Simulation of energy distribution for scanning x-ray probe. Surface and Interface Analysis 25(3): 202-208
Neugebauer, R.; Noack, S.; Klug, D. 2005: Simulation of energy flow in hydraulic drives of forming machines. Aust. J. Mech. Eng 2(1): 51-63
Bailleul, S.; Holsa, J.; Porcher, P. 1994: Simulation of energy level scheme and some magnetic properties of cesium copper chloride, Cs2CuCl4. European Journal of Solid State and Inorganic Chemistry 31(6): 431-447
Petrus Tri, B.H.A.S.K.O.R.O.; Syed Ihtsham Ul Haq, G.I.L.A.N.I.; Mohd Shiraz, A.R.I.S. 2013: Simulation of energy saving potential of a centralized HVAC system in an academic building using adaptive cooling technique. Energy Conversion and Management 75: 617-628
Rostamizadeh, M.; Khanlarkhani, M.; Sadrameli, S.M. 2012: Simulation of energy storage system with phase change material (PCM). Energy and Buildings 49: 419-422
Rapakoulias, D.E.; Gerassimou, D.E. 1987: Simulation of energy transfer from a glow discharge to a solid surface. Journal of Applied Physics 62(2): 402-408
Fujihira, M.; Sakomura, M.; Sawada, R. 1998: Simulation of energy transfer in photosynthetic antenna systems with monolayer assemblies. Mol. Cryst. Liq. Cryst. Sci. Technol., A Mol. Cryst. Liq. Cryst 322: 313-318
Sang Myung, C.H.U.N. 2011: Simulation of engine life time related with abnormal oil consumption. Tribology International 44(4): 426-436
Ohadi, A.R.; Maghsoodi, G. 2007: Simulation of engine vibration on nonlinear hydraulic engine mounts. Journal of Vibration and Acoustics 129(4): 417-424
Welch, G.; Phillips, R. 1990: Simulation of enhanced backscatter by a phase screen. Journal of the Optical Society of America. A, Optics and Image Science 7(4): 578-584
Suzuki, N.; Morinaga, M. 1995: Simulation of enhanced plasma effect wavelength tunable lasers. Iee Proc., Optoelectron 142(1): 55-60
Wanqiu, W.A.N.G.; Saha, S.; Pan, H.L.; Nadiga, S.; White, G. 2005: Simulation of ENSO in the new NCEP coupled forecast system model (CFS03). Monthly Weather Review 133(6): 1574-1593
Ngarcheung, L.A.U.; Philander, S.G.H.; Nath, M.J. 1992: Simulation of ENSO-like phenomena with a low-resolution coupled GCM of the global ocean and atmosphere. Journal of Climate 5(4): 284-307
Latif, M.; Biercamp, J.; Von Storch, H.; Mcphaden, M.J.; Kirk, E. 1990: Simulation of ENSO related surface wind anomalies with an atmospheric GCM forced by observed SST. Journal of Climate 3(5): 509-521
Goswami, B.N.; Krishnamurthy, V.; Saji, N.H. 1995: Simulation of ENSO-related surface winds in the tropical Pacific by an atmospheric general circulation model forced by observed sea surface temperatures. Monthly Weather Review 123(6): 1677-1694
Philander, S.G.H.; Pacanowski, R.C.; Lau, N.C.; Nath, M.J. 1992: Simulation of ENSO with a global atmospheric GCM coupled to a high-resolution, tropical pacific ocean GCM. Journal of Climate 5(4): 308-329
Bertoni, A.; Ionicioiu, R.; Zanardi, P.; Rossi, F.; Jacoboni, C. 2002: Simulation of entangled electronic states in semiconductor quantum wires. Physica, B Condens. Matter 314(1-4): 10-14
Karafyllidis, I.G. 2004: Simulation of entanglement generation and variation in quantum computation. Journal of Computational Physics 200(1): 383-397
Sun, J.Q.; Ma, Z.Q.; Qin, M.Z. 2006: Simulation of envelope Rossby solitons in a pair of cubic Schrödinger equations. Applied Mathematics and Computation 183(2): 946-952
Iizuka, T.; Amie, H.; Hasegawa, T.; Matsuoka, C. 1996: Simulation of envelope soliton scattering in discontinuous media. Journal of the Physical Society of Japan 65(10): 3237-3241
Meakin, R.L.; Street, R.L. 1988: Simulation of environmental flow problems in geometrically complex domains. I: A general coordinate transformation. Computer Methods in Applied Mechanics and Engineering 68(2): 151-175
Meakin, R.L.; Street, R.L. 1988: Simulation of environmental flow problems in geometrically complex domains. II: A domain-splitting method. Computer Methods in Applied Mechanics and Engineering 68(3): 311-331
Deiters, J.A.; Holmes, R.R. 1984: Simulation of enzymatic hydrolysis of p-nitrophenyldeoxythymidine diphosphate initiated by glutamate. Journal of the American Chemical Society 106(11): 3307-3309
Waggoner, J.R.; Castillo, J.L.; Lake, L.W. 1992: Simulation of EOR processes in stochastically generated permeable media. 1991 Spe Symposium on Reservoir Simulation 7(2): 173-180
Aguiar, R.; Sanchez, F.; Ferrater, C.; Aguilo, M.; Varela, M. 1998: Simulation of epitaxial growth of CeO2 on YSZ(100) and SrTiO3 on MgO(100) for YBa2Cu3O7-x deposition. Ictf-10 International Conference on Thin Films 317(1-2): 81-84
Giugliarelli, G.; Cannistraro, S. 1985: Simulation of EPR spectra of Cu2+ complexes with statistical distribution of the g-factor and hyperfine splitting. Chemical Physics 98(1): 115-122
Zwanenburg, G.; Keijzers, C.P.; De Boer, E.; Krupa, J.C. 1987: Simulation of EPR spectra of ThBr4:Pa4+ in the incommensurable phase. Chemical Physics Letters 140(1): 11-14
Soulie, E.J.; Chachaty, C. 1993: Simulation of EPR spectra with automatic fitting of the spectroscopic parameters and of the reorientational correlation time. Perkin Trans., 2 (11): 2021-2024
Dong, H.B.; Yang, X.L.; Lee, P.D.; Wang, W. 2004: Simulation of equiaxed growth ahead of an advancing columnar front in directionally solidified Ni-based superalloys. J. Mater. Sci 39(24): 7207-7212
Patwari, M.S.; Victora, R.H. 2010: Simulation of Erase After Write on 2.4 T FeCo Solid Pole Writer. IEEE Transactions on Magnetics 46(5): 1212-1219
Sajti, S.; Kerekes, A.; Barabas, M.; Lorincz, E.; Hvilsted, S.; Ramanujam, P.S. 2001: Simulation of erasure of photoinduced anisotropy by circularly polarized light. Optics Communications 194(4-6): 435-442
Deodatis, G. 1996: Simulation of ergodic multivariate stochastic processes. Journal of Engineering Mechanics 122(8): 778-787
Niu, Y.Y.; Tsai, C.S. 2000: Simulation of erosion by the dilute particulate flow impact. Numerical Heat Transfer. Part A, Applications 37(2): 167-187
Arefi, B.; Settari, A.; Angman, P. 2006: Simulation of erosion in drilling tools for the oil and gas industry. Journal of Canadian Petroleum Technology 45(11): 34-40
Turin, W. 1988: Simulation of error sources in digital channels. IEEE Journal on Selected Areas in Communications 6(1): 85-93
Ji, W.; Patterson, E.A. 1998: Simulation of errors in automated photoelasticity. Experimental Mechanics 38(2): 132-139
Cilento, T.; Schenkel, M.; Yun, C.; Mishra, R.; Li, J.; Chatty, K.; Gauthier, R. 2010: Simulation of ESD protection devices in an advanced CMOS technology using a TCAD workbench based on an ESD calibration methodology. Microelectron. Reliab 50(9-11): 1367-1372
Madan, D.B.; Seneta, E. 1987: Simulation of estimates using the empirical characteristic function. International Statistical Review 55(2): 153-161
De Bonfils, J.; Panczer, G.; De Ligny, D.; Peuget, S.; Delaye, J.M.; Chaussedent, S.; Monteil, A.; Champagnon, B. 2008: Simulation of Eu3+ luminescence spectra of borosilicate glasses by molecular dynamics calculations. Israeli-French Workshop on Advances in Optical and Laser Materials: Crystals, Amorphous Materials, Photonic Crystals and Nano-Particles 30(11): 1689-1693
Stamatescu, I.O.; Wolff, U.; Zwanziger, D. 1983: Simulation of euclidean quantum field theories by a random walk process. Nuclear Physics. B 225(3): 377-390
Cress, A.; Majewski, D.; Podzun, R.; Renner, V. 1995: Simulation of European climate with a limited area model. I: Observed boundary conditions. Contributions to Atmospheric Physics 68(2): 161-178
Podzun, R.; Cress, A.; Majewski, D.; Renner, V. 1995: Simulation of European climate with a limited area model. II: AGCM boundary conditions. Contributions to Atmospheric Physics 68(3): 205-225
Woodruff, P.R.; Macfarlane, J.J.; Golovkin, I.E.; Ping, W.A.N.G. 2007: Simulation of EUV spectral emission from laser-produced tin-doped water plasmas. Proc. Spie Int. Soc. Opt. Eng: 65173N.1-65173N.6
Chen, B.K.; Choi, S.K.; Thomson, P.T. 1990: Simulation of evolution of microstructure in a thermo-mechanical analysis of the hot rolling of aluminium. Res Mechanica 31(4): 455-469
Nogami, M. 1990: Simulation of evolutional process of longitudinal river profile using experimental flume and computer - La simulation des processus de l'évolution de profils fluviatiles en long en utilisant un canal expérimental et un traitement par ordinateur. Geographical Reports of Tokyo Metropolitan University (25): 195-211
Hongnan, Z.H.O.U. 1989: Simulation of evolutionary mechanism of planetary rings. Earth, Moon and Planets 46(3): 233-241
Hsi, J.P.; Small, J.C. 1992: Simulation of excavation in a poro-elastic material. International Journal for Numerical and Analytical Methods in Geomechanics 16(1): 25-43
Lyubartsev, A.P. 2005: Simulation of excited states and the sign problem in the path integral Monte Carlo method. Journal of Physics. A, Mathematical and General 38(30): 6659-6674
Lazarenkova, O.L.; Pikhtin, A.N. 2000: Simulation of excitonic spectra in electric field to characterize the quality of low dimensional structures. Appl. Surf. Sci 166: 273-277
Abdelgawad, H.; Abdulhai, B.; Amirjamshidi, G.; Wahba, M.; Woudsma, C.; Roorda, M.J. 2011: Simulation of Exclusive Truck Facilities on Urban Freeways. Journal of Transportation Engineering 137(8): 547-562
Ram Reddy, P.; Mohan Krishna, D.; Govinda Mallan, K.R.; Ganesan, V. 1994: Simulation of exhaust and intake processes in a four-stroke direct-injection diesel engine by control volume approach. Indian Journal of Engineering and Materials Sciences 1(4): 189-194
Wulf, J.; Schmauder, S.; Fischmeister, H.F. 1994: Simulation of experiment force-displacement curves by a Finite Element elimination technique. Computational Modelling of the Mechanical Behaviour of Materials. International Workshop 3(2): 300-306
Irby, J.H.; Stek, P. 1990: Simulation of experimental data from the proposed C-Mod reflectometer. Rev. Sci. Instrum 61(10): 3052-3054
Holck, O.; Heuchel, M.; Bohning, M.; Hofmann, D. 2008: Simulation of Experimentally Observed Dilation Phenomena During Integral Gas Sorption in Glassy Polymers. Journal of Polymer Science. Part B. Polymer Physics 46(1): 59-71
Aydinli, A.; Gunduc, Y.; Topacli, C. 1989: Simulation of explosive crystallisation in pulsed laser irradiated a-Si. Journal of Physics. D, Applied Physics 22(5): 693-698
Akbari Mousavi, A.A.; Burley, S.J.; Alhassani, S.T.S. 2005: Simulation of explosive welding using the Williamsburg equation of state to model low detonation velocity explosives. International Journal of Impact Engineering 31(6): 719-734
Nishizawa, H.; Shoji, T.; Okimura, S.; Abe, Y. 1995: Simulation of extraction process in dual-flow countercurrent extraction. Analytical Sciences 11(1): 109-112
Kentarchos, A.S.; Roelofs, G.J.; Lelieveld, J. 2000: Simulation of extratropical synoptic-scale stratosphere-troposphere exchange using a coupled chemistry GCM : Sensitivity to horizontal resolution. Journal of the Atmospheric Sciences 57(17): 2824-2838
Kroshilin, A.E.; Kroshilin, V.E.; Fuks, R.L. 2001: Simulation of extreme situations at an NPS with a VVER-1000 reactor using the BAGIRA-SAM package of computer codes. Thermal Engineering 48(12): 979-987
Ponte, J.; Riera, J.D. 2010: Simulation of extreme wind series caused by thunderstorms in temperate latitudes. Structural Safety 32(4): 231-237
Liu, H.C. 1988: Simulation of extrinsic bistability of resonant tunneling structures. Applied Physics Letters 53(6): 485-486
Liang, S.J.; Liu, Z.Y.; Wang, E.D. 2009: Simulation of extrusion process of AZ31 magnesium alloy. International Conference on Physical and Numerical Simulation of Material Processing 499(1-2): 221-224
Vail, J.M.; Yang, Z. 1993: Simulation of F, F+2, and (F+2)* centres in NaF:Mg. Journal of Physics. Condensed Matter 5(41): 7649-7656
Padilla, J.L.; Knoll, L.; Gamiz, F.; Zhao, Q.T.; Godoy, A.; Mantl, S. 2012: Simulation of Fabricated 20-nm Schottky Barrier MOSFETs on SOI: Impact of Barrier Lowering. Ieee Trans. Electron Devices 59(5): 1320-1327
Chou, J.K.; Yang, C.K. 2013: Simulation of face/hairstyle swapping in photographs with skin texture synthesis. Multimedia Tools and Applications 63(3): 729-756
Smereka, P.; Xingquan, L.I.; Russo, G.; Srolovitz, D.J. 2005: Simulation of faceted film growth in three dimensions: microstructure, morphology and texture. Acta Materialia 53(4): 1191-1204
Paritosh,; Srolovitz, D.J.; Battaile, C.C.; Li, X.; Butler, J.E. 1999: Simulation of faceted film growth in two-dimensions : Microstructure, morphology and texture. Acta Materialia 47(7): 2269-2281
Lepikhin, P.P. 2007: Simulation of fading path shape memory in the theory of simple materials with elastoplastic behavior and initial loading surface. Strength of Materials 39(4): 339-348
Pirondi, A.; Bonora, N.; Steglich, D.; Brocks, W.; Hellmann, D. 2006: Simulation of failure under cyclic plastic loading by damage models. Plasticity 2005 International Conference on Plasticity and Current Applications 22(11): 2146-2170
Singh, K.N.; Sievert, R.; Noack, H.D.; Clos, R.; Schreppel, U.; Veit, P.; Hamann, A.; Klingbeil, D. 2003: Simulation of failure under dynamic loading at different states of triaxiality for a nickel-base superalloy. J. Phys., Iv 110: 275-280
Tamaoki, T.; Takahashi, R. 1992: Simulation of fast breeder reactor noise based on two-channel core model. Nuclear Engineering and Design 136(3): 389-399
Petrenko, E.O.; Makarets, N.V.; Mikoushkin, V.M. 2012: Simulation of Fast Electron Transport in Thin Fullerite C60 Films : Advanced Carbon Nanostructures. Fuller. Nanotub. Carbon Nanostructures (Print) 20(1-8): 378-381
Bilato, R.; Brambilla, M.; Pavlenko, I.; Meo, F. 2002: Simulation of fast wave current drive in tokamaks in the ion cyclotron frequency range. Nuclear Fusion 42(9): 1085-1093
Rashidur Rotab Khan, M. 1997: Simulation of fatal time of a bullet wound victim. Simulation (San Diego, Calif.) 69(5): 283-289
Bo, W.A.N.G.; Siegmund, T. 2006: Simulation of fatigue crack growth at plastically mismatched bi-material interfaces. International Journal of Plasticity 22(9): 1586-1609
Fjeldstad, A.; Wormsen, A.; Harkegard, G. 2008: Simulation of fatigue crack growth in components with random defects. Engineering Fracture Mechanics 75(5): 1184-1203
Sumi, Y.; Funabashi, S. 1996: Simulation of fatigue crack growth in welded structures using superelement. Journal of the Society of Naval Architects of Japan 180: 549-557
Levkovitch, V.; Sievert, R.; Svendsen, B. 2005: Simulation of fatigue crack propagation in ductile metals by blunting and re-sharpening. International Journal of Fracture 136(1-4): 207-220
Wang, P.C.; Yang, J.M. 1997: Simulation of fatigue cracking and life distribution of SCS-6 fiber-reinforced orthorhombic titanium aluminide composites. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 222(2): 101-108
Tumino, D.; Cappello, F. 2007: Simulation of fatigue delamination growth in composites with different mode mixtures. Journal of Composite Materials 41(20): 2415-2441
Shokrieh, M.M.; Rafiee, R. 2006: Simulation of fatigue failure in a full composite wind turbine blade. Composite Structures 74(3): 332-342
Gasiak, G.; Robak, G. 2011: Simulation of fatigue life of constructional steels within the mixed modes I and III loading. Fatigue and Fracture of Engineering Materials and Structures 34(6): 389-402
Bai, D.; Zhu, J.X.; Jin, Y.; Yu, Z. 1998: Simulation of FCC catalyst regeneration in a riser regenerator. Chemical Engineering Journal (1996) 71(2): 97-109
Stockwell, D.M.; Wieland, W.S. 2000: Simulation of FCC equilibrium catalyst age distribution. Prepr. - Am. Chem. Soc., Div. Pet. Chem 45(2): 310-316
Almanza, L.O. 2007: Simulation of FCC equilibrium catalyst age distribution by using a deactivation model. Stud. Surf. Sci. Catal: 125-136
Chang, S.L.; Zhou, C.Q. 2003: Simulation of FCC riser flow with multiphase heat transfer and cracking reactions. Computational Mechanics 31(6): 519-532
Brito, P.; Duries, L.; Campos, J.; Portugai, A. 2007: Simulation of Fe2O3 /Al combustion : Sensitivity analysis. Iscre-19 : International Symposium on Chemical Reaction Engineering 62(18-20): 5078-5083
Zheludkov, S.V.; Maylibaev, A.T. 1991: Simulation of Fe substitutions in YBa2Cu3O7. Physics Letters. a 159(8-9): 417-420
Xun, C.H.E.N.; Allanson, D.; Thomas, A.; Moruzzi, J.L.; Rowe, W.B. 1994: Simulation of feed cycles for grinding between centres. International Journal of Machine Tools and Manufacture 34(5): 603-616
Haselhoff, E.H. 1993: Simulation of FEL start-up : the noise-number method. Optics Communications 101(3-4): 192-194
Skupin, S.; Peschel, U.; Etrich, C.; Leine, L.; Lederer, F.; Michaelis, D. 2003: Simulation of femtosecond pulse propagation in air. Optical Waveguide Theory and Numerical Modelling. International Workshop 35(4-5): 573-582
Kolesik, M.; Wright, E.M.; Moloney, J.V. 2004: Simulation of femtosecond pulse propagation in sub-micron diameter tapered fibers. Applied Physics. B, Lasers and Optics 79(3): 293-300
Werner, G.; Rudolph, W.; Heist, P.; Dorn, P. 1992: Simulation of femtosecond pulse traveling-wave amplification. Journal of the Optical Society of America. B, Optical Physics 9(9): 1571-1578
Reuther, H.; Brandon, H.; Raasch, J.; Raabe, D. 1995: Simulation of fermentor cooling performance. Monatsschr. Brauwiss 48(9-10): 310-317
Van Bohemen, S.M.C.; Bos, C.; Sietsma, J. 2011: Simulation of Ferrite Formation in Fe-C Alloys Based on a Three-Dimensional Mixed-Mode Transformation Model. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science 42(9): 2609-2618
Enomoto, M. 2002: Simulation of ferrite growth in continuously cooled low-carbon iron alloys. Metall. Mater. Trans., A Phys. Metall. Mater. Sci 33(8): 2309-2316
Dolan, J.E. 1993: Simulation of ferrite-loaded coaxial lines. Electronics Letters 29(9): 762-763
Dragosits, K.; Selberherr, S. 2001: Simulation of ferroelectric thin films. Radiat. Eff. Defect Solid 156(1-4): 157-161
Ravnik, J.; Skerget, L. 2012: Simulation of ferrofluids by BEM. Wit Transactions On Engineering Sciences v. 53: 167-178
Kolbe, H.; Weili, Z.H.A.N.G.; Balluer, L. 1990: Simulation of fertilizer influence on yield and quality of potato (solanum tuberosum) tubers by nonlinear optimization method. International Coloquium on Plant Nutrition-Physiology and Application, Proceedings 11 124(2): 309-313
Vorontsovvelyaminov, P.N.; Gorbuno, R.I. 2002: Simulation of few electron systems by combined path integral Monte Carlo method. Contributions to Plasma Physics (1985) 42(1): 27-30
Shuto, Y.; Yanagi, S.; Asakawa, S.; Kobayashi, M.; Nagase, R. 2003: Simulation of fiber fuse phenomenon in single-mode optical fibers : Optical networks. Journal of Lightwave Technology 21(11): 2511-2517
Zabihpoor, M.; Adibnazari, S. 2007: Simulation of fiber/matrix debonding in unidirectional composites under fatigue loading. Journal of Reinforced Plastics and Composites 26(8): 743-760
Yu, S.C.M.; Tso, C.P. 1995: Simulation of fiber optic sensors in determination of thin liquid film thicknesses. Advances in Engineering Software (1992) 22(1): 55-62
Kannan, K.; Rajagopal, K.R. 2005: Simulation of fiber spinning including flow-induced crystallization. Journal of Rheology (New York) 49(3): 683-703
Makipere, K.; Zamankhan, P. 2007: Simulation of fiber suspensions : A multiscale approach. Journal of Fluids Engineering 129(4): 446-456
Mukherjee, M.; Das, T.; Bose, S.; Chapal Kumar, D.A.S.; Kharitonov, A.P.; Banik, K.; Tham Nguyen, C.H.U.N.G.; Mennig, G. 2009: Simulation of Fibrillation of PC/LCP/Kevlar Blends and Its Characterizations. Macromol. Symp 277: 24-35
Krall, J.; Huba, J.D.; Fedder, J.A. 2008: Simulation of field-aligned H+ and He+ dynamics during late-stage plasmasphere refilling. Annales Geophysicae (1988) 26(6): 1507-1516
Adly, A.A.; Davino, D.; Visone, C. 2006: Simulation of field effects on the mechanical hysteresis of Terfenol rods and magnetic shape memory materials using vector Preisach-type models. Physica, B Condens. Matter 372(1-2): 207-210
Khaneja, M.; Ghosh, S.; Chaudhury, P.K.; Kumar, V. 2014: Simulation of field emission behavior from multiple carbon nanotubes in an integrated gate triode configuration. Physica. E, Low-Dimentional Systems and Nanostructures 63: 268-271
Zaidman, E.G. 1993: Simulation of field emission microtriodes. Ieee Trans. Electron Devices 40(5): 1009-1016
Fowler, H.A.; Melmed, A.J.; Elswijk, H.B. 1990: Simulation of field-ion-microscope images for the Al-Mn icosahedral phase. Philosophical Magazine. B. Physics of Condensed Matter. Electronic, Optical and Magnetic Properties 61(5): 811-827
Adly, A.A.; Mayergoyz, I.D. 1998: Simulation of field-temperature effects in magnetic media using anisotropic Preisach models. Ieee Trans. Magn 34(4): 1264-1266
Singh, N.K.; Bhattacharya, R.; Khatun, H.; Singh, U.; Sinha, A.K. 2012: Simulation of Filament Heater for Uniform Emission from Dispenser Cathode. Journal of Fusion Energy 31(3): 205-210
Joseph, G.G.; Geffroy, E.; Mena, B.; Walton, O.R.; Huilgol, R.R. 2000: Simulation of filling and emptying in a hexagonal-shape solar grain silo. Particulate Science and Technology 18(4): 309-327
Sahu, R.; Donggang, Y.A.O.; Byung, K.I.M. 1999: Simulation of filling pattern of multicomponent injection molding. Polymer-Plastics Technology and Engineering (Softcover Ed) 38(2): 241-254
Xianchang, L.I.; Ting, W.A.N.G. 2006: Simulation of film cooling enhancement with mist injection. Journal of Heat Transfer 128(6): 509-519
Neesse, T.H.; Dueck, J.; Djatchenko, E. 2009: Simulation of filter cake porosity in solid/liquid separation. Powder Technol 193(3): 332-336
Dinges, C.; Rose, H. 1995: Simulation of filtered and unfiltered TEM images and diffraction patterns. Physica Status Solidi. A. Applied Research 150(1): 23-30
Sano, N. 1994: Simulation of FIM images of precipitation-hardening alloys. Appl. Surf. Sci 76-77(1-4): 297-302
Zung, E.; Angeles, J. 1988: Simulation of finite-dimensional linear dynamical systems using zero-order holds and numerical -stabilization methods. Computers and Mathematics with Applications (1987) 16(4): 307-320
Pokhodzei, B.B. 1992: Simulation of finite discrete distributions: a tabular approach. Computational Mathematics and Mathematical Physics 32(5): 611-619
Soonghyuck, S.U.H.; Lermer, N.; Oshea, S.F. 1989: Simulation of finite patches of xenon on graphite. Chemical Physics 129(2): 273-284
De Menezes, L.R.A.X.; Machado, A.H.; Sisnando, P.S.R.; Abdalla, H. 1996: Simulation of finline structures using the TLM method. International Journal of Infrared and Millimeter Waves 17(11): 1927-1935
Chow, W.K. 1997: Simulation of fire environment for linear atria in Hong Kong. Journal of Architectural Engineering 3(2): 80-88
Embrechts, J.J. 2000: Simulation of first and second order scattering by rough surfaces with a sound ray formalism. Journal of Sound and Vibration 229(1): 65-87
Rezaul Karim, M.; Sekine, M.; Higuchi, T.; Imai, T.; Ukita, M. 2003: Simulation of fish behavior and mortality in hypoxic water in an enclosed bay. Ecological Modelling 159(1): 27-42
Toyoda, I.; Adachi, N.; Kato, S.; Kawasaki, J. 1987: Simulation of fixed-bed adsorption of CO2-C2H4-zeolite 5A system with azeotropic behavior. Journal of Chemical Engineering of Japan 20(4): 434-437
Bhattacharya, A.; Joseph, B. 1988: Simulation of fixed-bed gas-solid reactors using an adaptive-spline collocation method. Computers and Chemical Engineering 12(4): 351-353
Pepe, R.A.; Rogers, J.D. 1987: Simulation of fixed-point operations with high-level languages. IEEE Transactions on Acoustics, Speech, and Signal Processing 35(1): 116-118
Seneviratne, P.N. 1988: Simulation of fixed route bus travel time. Journal of Advanced Transportation 22(1): 39-53
Vaagsaether, K.; Knudsen, V.; Bjerketvedt, D. 2007: Simulation of flame acceleration and DDT in H2-air mixture with a flux limiter centered method. Ichs-2005: the International Conference on Hydrogen Safety 32(13): 2186-2191
Tang, B.H.Y.; Chan, C.K. 2006: Simulation of flame surface density and burning rate of a premixed turbulent flame using contour advection. Combustion and Flame 147(1-2): 49-66
Lame, A.; Altintas, Y. 2005: Simulation of flank milling processes. International Journal of Machine Tools and Manufacture 45(4-5): 549-559
Costa, G.M.N.; Guerrieri, Y.; Kislansky, S.; Pessoa, F.L.P.; Vieira de Melo, S.A.B.; Embirncu, M. 2009: Simulation of Flash Separation in Polyethylene Industrial Processing: Comparison of SRK and SL Equations of State. Industrial and Engineering Chemistry Research 48(18): 8613-8628
Lawryshyn, Y.A.; Kuhn, D.C.S. 1998: Simulation of flexible fibre motion through screen apertures. Journal of Pulp and Paper Science 24(12): 404-411
Huang, W.X.; Soo Jai, S.H.I.N.; Hyung Jin, S.U.N.G. 2007: Simulation of flexible filaments in a uniform flow by the immersed boundary method. Journal of Computational Physics 226(2): 2206-2228
Liangwey, C.H.A.N.G.; Hamilton, J.F. 1991: Simulation of flexible-link manipulators applying sequential integration method. Journal of Dynamic Systems, Measurement, and Control 113(1): 175-178
Damaren, C.; Sharf, I. 1995: Simulation of flexible-link manipulators with inertial and geometric nonlinearities. Journal of Dynamic Systems, Measurement, and Control 117(1): 74-87
Cao, H.X.; Veng Cheong, L.O.; Li, Z.Y. 2006: Simulation of flexoelectricity effect on imprint behavior of ferroelectric thin films. Solid State Communications 138(8): 404-408
Anandan, P.; Nithya, A.; Mohankumar, N. 2014: Simulation of flicker noise in gate-all-around Silicon Nanowire MOSFETs including interface traps. Microelectronics and Reliability 54(12): 2723-2727
Von Grunigen, D.C.; Ramseier, D.; Moschytz, G.S. 1986: Simulation of floating impedances for low-frequency active filter design. Proceedings of the IEEE 74(2): 366-368
Prat, O.P.; Ducoste, J.J. 2007: Simulation of flocculation in stirred vessels : Lagrangian versus eulerian. Chemical Engineering Research and Design 85(2): 207-219
Maddaloni, G.; Ryu, K.P.; Reinhorn, A.M. 2011: Simulation of floor response spectra in shake table experiments. Earthquake Engineering and Structural Dynamics 40(6): 591-604
Atkinson, K.J.W.; Grimes, R.W.; Owens, S.L. 2002: Simulation of flourine migration in NiF2. Solid State Ionics 150(3-4): 443-448
Ramamurti, R.; Sandberg, W. 2001: Simulation of flow about flapping airfoils using finite element incompressible flow solver. Aiaa Journal 39(2): 253-260
Saephan, S.; Van dam C, P.; Fremaux, C.M.; Dalbello, T. 2004: Simulation of flow about rotating forebodies at high angles of attack. Journal of Aircraft 41(6): 1298-1305
Zughbi, H.D.; Razzak, S.A. 2005: Simulation of flow and chemical reactions in a claus sulfur converter. Industrial and Engineering Chemistry Research 44(26): 9828-9839
Williamson, A.K.; Prudic, D.E. 1986: Simulation of flow and compaction in the regional aquifer suystem of the Central Valley of California, U.S.A - Simulation de l'écoulement et compactage dans un système d'aquifère régional, dans la vallée centrale de Californie, Etats-Unis. Land Subsidence. International Symposium 3 (1984) (151): 271-280
Mihopoulos, T.G.; Hummel, S.G.; Jensen, K.F. 1998: Simulation of flow and growth phenomena in a close-spaced reactor. J. Cryst. Growth 195(1-4): 725-732
Li, Q.; Zhao, K.; Xuan, Y.M. 2011: Simulation of flow and heat transfer with evaporation in a porous wick of a CPL evaporator on pore scale by lattice Boltzmann method. International Journal of Heat and Mass Transfer 54(13-14): 2890-2901
Sohrabi, M.; Raiaie, E. 2009: Simulation of flow and modelling the residence time distribution in a continuous two impinging liquid-liquid streams reactor using the Monte Carlo Technique. Wit Transactions On Engineering Sciences v. 63: 205-214
Yun, W.A.N.G.; Wang, C.Y. 2005: Simulation of flow and transport phenomena in a polymer electrolyte fuel cell under low-humidity operation. Journal of Power Sources 147(1-2): 148-161
Shklover, G.G.; Dvorak, A.V.; Neroslavskiy, I.L. 1990: Simulation of flow around a levitating sphere. Heat Transfer. Soviet Research 22(7): 880-884
Shashi Ranjan, K.U.M.A.R.; Sharma, A.; Agrawal, A. 2008: Simulation of flow around a row of square cylinders. Journal of Fluid Mechanics 606: 369-397
Kunlun, L.I.U.; Radhakrishnan, H.; Barocas, V.H. 2008: Simulation of flow around a thin, flexible obstruction by means of a deforming grid overlapping a fixed grid. International Journal for Numerical Methods in Fluids 56(6): 723-738
Ali, K.H.M.; Karim, O. 2002: Simulation of flow around piers. Journal of Hydraulic Research 40(2): 161-174
Marcus, P.S.; Tuckerman, L.S. 1987: Simulation of flow between concentric rotating spheres. I: Steady states. Journal of Fluid Mechanics 185: 1-30
Marcus, P.S.; Tuckerman, L.S. 1987: Simulation of flow between concentric rotating spheres. II: Transitions. Journal of Fluid Mechanics 185: 31-65
Chang, F.C.; Hull, J.R.; Beitelman, L. 2004: Simulation of flow control in the meniscus of a continuous casting mold with opposing alternating current magnetic fields. Metallurgical and Materials Transactions. B, Process Metallurgy and Materials Processing Science 35(6): 1129-1137
Kareeri, A.A.; Zughbi, H.D.; Alali, H.H. 2006: Simulation of flow distribution in radial flow reactors. Industrial and Engineering Chemistry Research 45(8): 2862-2874
Uddin, E.; Hyung Jin, S.U.N.G. 2012: Simulation of flow-flexible body interactions with large deformation. International Journal for Numerical Methods in Fluids 70(9): 1089-1102
Ming, L.V.; Rong, Z.H.U.; Guo, Y.G.; Wang, Y.W. 2013: Simulation of Flow Fluid in the BOF Steelmaking Process. Metallurgical and Materials Transactions. B, Process Metallurgy and Materials Processing Science 44(6): 1560-1571
Khopkar, A.R.; Mavros, P.; Ranade, V.V.; Bertrand, J. 2004: Simulation of flow generated by an axial-flow impeller: Batch and continuous operation. Chemical Engineering Research and Design 82(6): 737-751
Angelov, G.; Gourdon, C.; Line, A. 1998: Simulation of flow hydrodynamics in a pulsed solvent extraction column under turbulent regimes. Chemical Engineering Journal (1996) 71(1): 1-9
Ajersch, F.; Ilinca, F.; Hetu, J.F. 2004: Simulation of flow in a continuous galvanizing bath: Part I. Thermal effects of ingot addition. Metallurgical and Materials Transactions. B, Process Metallurgy and Materials Processing Science 35(1): 161-170
Ajersch, F.; Ilinca, F.; Hetu, J.F. 2004: Simulation of flow in a continuous galvanizing bath: Part II. Transient aluminum distribution resulting from ingot addition. Metallurgical and Materials Transactions. B, Process Metallurgy and Materials Processing Science 35(1): 171-178
Pan Soo, K.I.M.; White, J.L. 1996: Simulation of flow in an intermeshing internal mixer and comparison of rotor designs. Rubber Chem. Technol 69(4): 686-695
Kim, P.S.; White, J.L. 1999: Simulation of flow in an intermeshing internal mixer: Role of clearance between rotor axes and rotor flight-chamber clearance. Kautschuk und Gummi, Kunststoffe 52(5): 359-367
Hu, B.; White, J.L. 1996: Simulation of flow in an internal mixer to evaluate rotor design : Effect of non-Newtonian behaviour. Kautschuk und Gummi, Kunststoffe 49(4): 285-288
Preisig, G.; Cornaton, F.J.; Perrochet, P. 2012: Simulation of flow in fractured rocks using effective stress-dependent parameters and aquifer consolidation. Iahs-Aish Publ 355: 273-279
White, J.L.; Kim, M.H.; Akron, M.H. 1991: Simulation of flow in non-intermeshing counter-rotating twin screw extruders and continuous mixers for the rubber and thermoplastics industry. Kautschuk und Gummi, Kunststoffe 44(7): 653-658
Sahu, A.K.; Kumar, P.; Joshi, J.B. 1998: Simulation of flow in stirred vessel with axial flow impeller : Zonal modeling and optimization of parameters. Industrial and Engineering Chemistry Research 37(6): 2116-2130
Sahu, A.K.; Joshi, J.B. 1995: Simulation of flow in stirred vessels with axial flow impellers : effects of various numerical schemes and turbulence model parameters. Industrial and Engineering Chemistry Research 34(2): 626-639
Arumuga Perumal, D.; Dass, A.K. 2008: Simulation of flow in two-sided lid-driven square cavities by the lattice Boltzmann method. Wit Transactions On Engineering Sciences v. 59: 45-54
Holm, M.; Stang, J.; Delsing, J. 1995: Simulation of flow meter calibration factors for various installation effects. Measurement 15(4): 235-244
Wren, G.P.; Ray, S.E.; Aliabadi, S.K.; Tezduyar, T.E. 1997: Simulation of flow problems with moving mechanical components, fluid-structure interactions and two-fluid interfaces. Int. J. Numer. Methods Fluids 24(12): 1433-1448
Doummar, J.; Sauter, M.; Geyer, T. 2012: Simulation of flow processes in a large scale karst system with an integrated catchment model (Mike She) ― Identification of relevant parameters influencing spring discharge. Journal of Hydrology (Amsterdam) 426-427: 112-123
Home, D.; Arvanitis, G.; Lightstone, M.F.; Hamed, M.S. 2009: Simulation of flow pulsations in a twin rectangular sub-channel geometry using unsteady Reynolds Averaged Navier―Stokes modelling. Nuclear Engineering and Design 239(12): 2964-2980
Jimenez, V.; Masana, F.; Dominguez, M.; Castaner, L. 1998: Simulation of flow sensors for home appliances. Microelectronics J 29(4-5): 283-289
Chunna, L.I.; Zhengyin, Y.E.; Gang, W.A.N.G. 2008: Simulation of Flow Separation at the Wing-Body Junction with Different Fairings. Journal of Aircraft 45(1): 258-266
Brosa, U.; Stauffer, D. 1991: Simulation of flow through a two-dimensional random porous medium. Journal of Statistical Physics 63(1-2): 405-409
Akagaki, T.; Kato, K. 1988: Simulation of flow wear in boundary lubrification using a Vickers identation method. Tribology Transactions 31(3): 311-316
Ross, R.F.; Klingenberg, D.J. 1998: Simulation of flowing wood fibre suspensions. Journal of Pulp and Paper Science 24(12): 388-392
Lohner, R.; Chi, Y.A.N.G.; Onate, E. 2007: Simulation of flows with violent free surface motion and moving objects using unstructured grids. Int. J. Numer. Methods Fluids 53(8): 1315-1338
Jugroot, M.; Harvey, J.K. 2001: Simulation of flows within an electrostatic ion thruster for space missions. Aerodymanics Research Conference 2001 105(1053): 613-618
Nanjo, H.; Nony, L.; Yoneya, M.; Sanada, N.; Iijima, T.; Aime, J.P. 2002: Simulation of fluctuation and dissipation in dynamic force microscopy. Appl. Surf. Sci 188(3-4): 349-354
Davilamaldonado, O.; Adams, A.; Oliveira, L.; Alquist, B.; Morales, R.D. 2008: Simulation of Fluid and Inclusions Dynamics during Filtration Operations of Ductile Iron Melts Using Foam Filters. Metallurgical and Materials Transactions. B, Process Metallurgy and Materials Processing Science 39(6): 818-839
Wahab, M.; Zehl, T.; Reimer, U.; Mogel, H.J.; Schiller, P. 2003: Simulation of fluid bridges and films. Pccp. Physical Chemistry Chemical Physics 5(21): 4880-4884
Denisov, E.E. 1996: Simulation of fluid dynamics on the basis of electrical methods. Thermal Engineering 43(6): 500-504
Odenthal, H.J.; Thiedemann, U.; Falkenreck, U.; Schlueter, J. 2010: Simulation of Fluid Flow and Oscillation of the Argon Oxygen Decarburization (AOD) Process. Metallurgical and Materials Transactions. B, Process Metallurgy and Materials Processing Science 41(2): 396-413
Sridhar, G.; Paul, P.J.; Mukunda, H.S. 2004: Simulation of fluid flow in a high compression ratio reciprocating internal combustion engine. Proceedings of the Institution of Mechanical Engineers. Part A. Journal of Power and Energy 218(6): 403-416
Naceur, K.B.; Thiercellin, M.; Touboul, E. 1990: Simulation of fluid flow in hydraulic fracturing : implications for 3D propagation. Spe Symposium on Reservoir Simulation 1 5(2): 133-141
Reddy, S.; Bonnecaze, R.T. 2005: Simulation of fluid flow in the step and flash imprint lithography process. Microelectronic Engineering 82(1): 60-70
Thomas, B.G.; Mika, L.J.; Najjar, F.M. 1990: Simulation of fluid flow inside a continuous slab-casting machine - Simulation de l'écoulement dans une installation à coulée continue à brames. Metallurgical Transactions. B, Process Metallurgy 21(2): 387-400
Boucher, R.F.; Kitsios, E.E. 1986: Simulation of fluid network dynamics by transmission line modelling. Proceedings of the Institution of Mechanical Engineers. Part C. Mechanical Engineering Science 200(1): 21-29
Luoding, Z.H.U.; Tretheway, D.; Petzold, L.; Meinhart, C. 2005: Simulation of fluid slip at 3D hydrophobic microchannel walls by the lattice Boltzmann method. Journal of Computational Physics 202(1): 181-195
Freitas, C.J.; Runnels, S.R. 1999: Simulation of fluid-structure interaction using patched-overset grids. Journal of Fluids and Structures 13(2): 191-207
Degroote, J.; Swillens, A.; Bruggeman, P.; Haelterman, R.; Segers, P.; Vierendeels, J. 2010: Simulation of fluid-structure interaction with the interface artificial compressibility method. International Journal for Numerical Methods in Biomedical Engineering 26(3-4): 276-289
Strumio, C.; Grabowski, S.; Kaminski, W.; Zbicinski, I. 1989: Simulation of fluidized bed drying of biosynthesis products. Chemical Engineering and Processing 26(2): 139-145
Allison, S.A. 1986: Simulation of fluorescence energy transfer. Journal of Physical Chemistry (1952) 90(17): 4020-4026
Gadiyak, G.V.; Morokov, Y.N.; Mukhin, D.N. 1992: Simulation of fluorine interaction with a silicon surface. Appl. Surf. Sci 60-61: 131-135
Kokkoris, G.; Gogolides, E.; Boudouvis, A.G. 2001: Simulation of fluorocarbon plasma etching of SiO2 structures. Mne 2000 Micro- and Nano-Engineering. International Conference 57-58: 599-605
Shamsuddin, I.L.I.A.S.; Rakesh, G.O.V.I.N.D. 1989: Simulation of flux decline due to particulate fouling in ultrafiltration. Particulate Science and Technology 7(3): 187-199
Gjelstad, A.; Rasmussen, K.E.; Pedersenbjergaard, S. 2007: Simulation of flux during electro-membrane extraction based on the Nernst-Planck equation. J. Chromatogr 1174(1-2): 104-111
Fang, F.A.N.G.; Manchester, W.; Abbett, W.P.; Van der Holst, B. 2010: Simulation of Flux Emergence from the Convection Zone to the Corona. The Astrophysical Journal 714(2): 1649-1657
Maruyama, T. 2011: Simulation of flying debris using a numerically generated tornado-like vortex. J. Wind Eng. Ind. Aerodyn 99(4): 249-256
Hui, L.I.; Hao, Z.H.E.N.G.; Fritzsche, J.; Amemiya, K.; Talke, F.E. 2010: Simulation of Flying Height and Response Time of Thermal Flying Height Control Sliders With Thermal Insulators. Ieee Trans. Magn 46(6): 1292-1294
Tripathy, S.C. 1992: Simulation of flywheel energy storage system for city buses. Energy Conversion and Management 33(4): 243-250
Tighe, S.C.; Manzione, L.T. 1988: Simulation of foaming in reaction injection molding. Polymer Engineering and Science 28(15): 949-954
Yokono, H.; Tsuzuku, S.; Hira, Y.; Gotoh, M.; Miyano, Y. 1985: Simulation of foaming process of polyurethane integral skin foams. Polymer Engineering and Science 25(15): 959-964
Kunder, D.; Baer, E.; Sekowski, M.; Pichler, P.; Rommel, M. 2010: Simulation of focused ion beam etching by coupling a topography simulator and a Monte-Carlo sputtering yield simulator. International Conference on Micro- and Nano-Engineering 87(5-8): 1597-1599
Roemer, R.B.; Swindell, W.; Clegg, S.T.; Kress, R.L. 1984: Simulation of focused, scanned ultrasonic heating of deep-seated tumors: the effect of blood perfusion. IEEE Transactions on Sonics and Ultrasonics 31(5): 457-466
Yujing, S.U.N.; Xu, W.L. 2010: Simulation of food mastication based on discrete element method. International Journal of Computer Applications in Technology 39(1-3): 3-11
Zalesny, V.B. 1991: Simulation of forced and free oceanic circulation regimes and dynamical initialization problem. Izvestia Akademii Nauk Sssr. Fizika Atmosfery i Okeana 27(10): 1068-1079
Zakrzewski, K.; Tomczuk, B.; Koteras, D. 2002: Simulation of forces and 3-D field arising during power autotransformer fault due to electric arc in HV winding. Ieee Trans. Magn 38(2): 1153-1156
Oikawa, T. 1986: Simulation of forest carbon dynamics based on a dry-matter production model. III: Effects of increasing CO2 upon a tropical rainforest ecosystem. Shokubutsugaku Zasshi 99(1056): 419-430
Starenchenko, V.A.; Kolupaeva, S.N.; Kotsyurbenko, A.V. 1998: Simulation of formation of disoriented structures in deformation of f.c.c. materials. Metal Science and Heat Treatment 40(3-4): 140-142
Jing, Z.H.A.O.; Liqun, L.U.; Zhenghuan, H.U. 2011: Simulation of forming automotive semi-axes with multi-wedge cross wedge rolling. International Journal of Computer Applications in Technology 41(1-2): 17-21
Bercovier, M.; Engelman, M.; Fortin, M.; Goldberger, N. 1986: Simulation of forming processes by FEM with a Bingham fluid model - La simulation des processus de formage par une méthode aux éléments finis avec un modèle de fluide de Bingham. International Journal for Numerical Methods in Fluids 6(4): 197-218
Schreurs, P.J.G.; Veldpaus, F.E.; Brekelmans, W.A.M. 1986: Simulation of forming processes, using the arbitrary Eulerian-Lagrangien formulation. Computer Methods in Applied Mechanics and Engineering 58(1): 19-36
Kondratev, S.A.; Vorontsova, N.K. 1989: Simulation of forming the runoff from basins of small forest lakes. Meteorologia i Gidrologia (10): 96-103
Rubinelli, F.A. 2012: Simulation of forward dark current voltage characteristics of tandem solar cells. Thin Solid Films 520(13): 4449-4454
Ando, T.; Akamatsu, K.; Nakao, S.I.; Fujita, M. 2012: Simulation of fouling and backwash dynamics in dead-end microfiltration: Effect of pore size. Journal of Membrane Science 392-393: 48-57
Madhan Mohan, G.; Prasad, P.S.S.; Karthikeyan, B.; Vidhya, M.; Karthikeyan, E. 2008: Simulation of foundry environment for improving occupational exposure to heat stress conditions. International Journal of Environment and Health 2(2): 171-183
Schneider, T.; Schilder, D. 1998: Simulation of four-wave mixing in optical fibers under consideration of the polarization states of the waves. Journal of Optical Communications 19(3): 115-119
Behery, G.M. 2006: Simulation of fractal dimension evaluations. International Journal of Modelling and Simulation 26(2): 91-97
Sugi, M.; Hirano, Y.; Miura, Y.F.; Saito, K. 2001: Simulation of fractal immittance by ladder circuits. Asomf'3: Asian Symposium on Organized Molecular Films for Electronics and Photo 371: 155-158
Felinger, A.; Liszi, J. 1991: Simulation of fractal-like crystal growth. Zeitschrift für Naturforschung. A, a Journal of Physical Sciences 46(1-2): 203-205
Duan, J.I.A.N.Z.H.O.N.G.; Li, Y.A.N.; Wu, Z.I.Q.I.N. 1988: Simulation of fractal-like structures in bilayer Pd-Si alloy films - Simulation des structures de type fractales dans les couches minces bicouches d'alliage Pd-Si. Solid State Communications 65(1): 7-10
Bruton, L.T.; Bartley, N.R. 1994: Simulation of fractal multidimensional images using multidimensional recursive filters. IEEE Transactions on Circuits and Systems 2, Analog and Digital Signal Processing 41(3): 181-188
Kim, H.; Wagoner, M.P.; Buttlar, W.G. 2008: Simulation of Fracture Behavior in Asphalt Concrete Using a Heterogeneous Cohesive Zone Discrete Element Model. Journal of Materials in Civil Engineering 20(8): 552-563
Heyden, S.; Gustafsson, P.J. 1998: Simulation of fracture in a cellulose fibre network. Journal of Pulp and Paper Science 24(5): 160-165
Prechtel, M.; Ronda, P.L.; Janisch, R.; Hartmaier, A.; Leugering, G.; Steinmann, P.; Stingl, M. 2011: Simulation of fracture in heterogeneous elastic materials with cohesive zone models. International Journal of Fracture 168(1): 15-29
Birgisson, B.; Soranakom, C.; Napier, J.A.L.; Roque, R. 2003: Simulation of fracture initiation in hot-mix asphalt mixtures. Transportation Research Record (1849): 183-190
Lebovka, N.I.; Mank, V.V.; Pivovarova, N.S.; Anderson, J.R.X. 1992: Simulation of fracture of a nonuniform system under conditions of non-steady-state deformation. Soviet Physics. Solid State 34(7): 1072-1076
Knudsen, K.D.; Hernandez Cifre, J.G.; Lopez Cascales, C.J.J.; Garcia de la Torre, J. 1995: Simulation of fracture of flexible polymer chains in transient elongational flow. Macromolecules 28(13): 4660-4664
Zhennan, Z.H.A.N.G.; Yongquan, C.H.E.N. 2009: Simulation of fracture propagation subjected to compressive and shear stress field using virtual multidimensional internal bonds. International Journal of Rock Mechanics and Mining Sciences (1997) 46(6): 1010-1022
Havlicek, J.; Hokr, M. 2008: Simulation of fractured rock solute transport with a multidimensional dual-porosity model. Iahs-Aish Publ: 52-57
Yoshihara, H.; Ohta, M. 1992: Simulation of fracturing process of wood by finite element method. Zairyo 41(461): 153-159
Yoshihara, H.; Ohta, M. 1996: Simulation of fracturing process of wood by finite element method. Materials Science Research International 2(3): 173-180
Kato, N.; Kudo, M. 2011: Simulation of fragmentation of arginine molecule aggregate by quantum molecular dynamics for TOF-SIMS spectral analysis. Surf. Interface Anal 43(1-2): 402-405
Moulin, A.; Condat, M. 1997: Simulation of Frank-Read sources in silicon. Icsma 11: International Conference on the Strength of Materials 234-236: 406-409
Moulin, A.; Condat, M.; Kubin, L.P. 1997: Simulation of Frank-Read sources in silicon. Acta Materialia 45(6): 2339-2348
Felicelli, S.D.; Heinrich, J.C.; Poirier, D.R. 1991: Simulation of freckles during vertical solidification of binary alloys. Metallurgical Transactions. B, Process Metallurgy 22(6): 847-859
De Sampaio, P.A.B.; Coutinho, A.L.G.A. 1999: Simulation of free and forced convection incompressible flows using an adaptive parallel/vector finite element procedure. International Journal for Numerical Methods in Fluids 29(3): 289-309
Doquang, M.; Amberg, G. 2008: Simulation of free dendritic crystal growth in a gravity environment. Journal of Computational Physics 227(3): 1772-1789
Marable, W.P.; Chamei, T.A.N.G.; Esarey, E. 1991: Simulation of free-electron lasers in the presence of correlated magnetic field errors. IEEE Journal of Quantum Electronics 27(12): 2693-2696
Hwang, J.K.; King, G.; Creighton, S.; Warshel, A. 1988: Simulation of free energy relationships and dynamics of SN2 reactions in aqueous solution. Journal of the American Chemical Society 110(16): 5297-5311
Davis, T.P.; Kukulj, D.; Maxwell, I.A. 1995: Simulation of free radical addition reactions modified by the presence of cobalt macrocycles. Macromolecular Theory and Simulations 4(1): 195-208
Gibson, M.M.; Rodi, W. 1989: Simulation of free surface effects on turbulence with a Reynolds stress model. Journal of Hydraulic Research 27(2): 233-244
Song, C.C.S.; Fayi, Z.H.O.U. 1999: Simulation of free surface flow over spillway. Journal of Hydraulic Engineering (New York, N.Y.) 125(9): 959-967
Golovachev, Y.P.; Notkina, E.A.; Chizhov, A.V.; Shmidt, A.A. 2001: Simulation of free-surface flows involving shock waves. Computational Mathematics and Mathematical Physics 41(1): 151-160
Rao, P.; Pani, B.S. 2000: Simulation of free surface flows using a Runge-Kutta technique. Applied Mathematics and Computation 114(1): 27-38
Shin, S.; Sung Yong, B.A.E.; In Chul, K.I.M.; Yong Jig, K.I.M.; Hyeon Kyu, Y.O.O.N. 2012: Simulation of free surface flows using the flux-difference splitting scheme on the hybrid Cartesian/immersed boundary method. International Journal for Numerical Methods in Fluids 68(3): 360-376
Soleiman Beygi, N.; Hakimzadeh, H.; Chenaglou, M.R. 2014: Simulation of free surface flows using volume of fluid method and genetic algorithm. Journal of Hydroinformatics 16(5): 1110-1124
Wittmaack, R. 2002: Simulation of free-surface flows with heat transfer and phase transitions and application to corium spreading in the EPR. Nuclear Technology 137(3): 194-212
Takada, N.; Hoshino, T.; Ishikawa, S.; Higaki, S. 2002: Simulation of free-surface viscous flow around practical hull and rudder with propeller effects. Journal of the Society of Naval Architects of Japan 192: 63-70
Wu, N.J.; Chang, K.A. 2011: Simulation of free-surface waves in liquid sloshing using a domain-type meshless method. International Journal for Numerical Methods in Fluids 67(3): 269-288
Szabo, P.; Hassager, O. 1995: Simulation of free surfaces in 3-D with the arbitrary Lagrange-Euler method. International Journal for Numerical Methods in Engineering 38(5): 717-734
Skabardonis, A. 2002: Simulation of freeway weaving areas. Transportation Research Record (1802): 115-124
Choi, I.G.; Eyler, L.L.; Allen, C.R. 1991: Simulation of freeze/restart process for defense waste processing melter. Radioactive Waste Management and the Nuclear Fuel Cycle 16(2): 119-135
Slater, A.G.; Pitman, A.J.; Desborough, C.E. 1998: Simulation of freeze-thaw cycles in a general circulation model land surface scheme. Journal of Geophysical Research 103(D 10): 11303-11312
Ruiping, L.I.; Haibin, S.H.I.; Flerchinger, G.N.; Akae, T.; Changsheng, W.A.N.G. 2012: Simulation of freezing and thawing soils in Inner Mongolia Hetao Irrigation District, China. Geoderma (Amsterdam) 173-174: 28-33
Muzzio, C.R.; Dini, N.G. 2011: Simulation of freezing step in vial lyophilization using finite element method. Computers and Chemical Engineering 35(11): 2274-2283
Bondarev, E.A. 1989: Simulation of freezing-thawing of soil materials - Simulation des processus de gel-dégel dans les sols. Frost in Geotechnical Engineering. International Symposium (94): 167-183
Hong, J.; Huang, W.P.; Makino, T. 1995: Simulation of frequency chirps in MQW DFB lasers under external modulation. Iee Proc., Optoelectron 142(1): 44-50
Kasparov Eh, A.; Khachaturov, A.A.; Shakaryan Yu, G. 1989: Simulation of frequency starting of a type KSP-320-2 synchronous condenser. Elektricestvo (5): 1-11
Mechtcherine, V.; Gram, A.; Krenzer, K.; Schwabe, J.H.; Shyshko, S.; Roussel, N. 2014: Simulation of fresh concrete flow using Discrete Element Method (DEM): theory and applications. Materials and Structures 47(4): 615-630
Sablani, S.S.; Goosen, M.F.A.; Paton, C.; Shayya, W.H.; Alhinai, H. 2003: Simulation of fresh water production using a humidification-dehumidification seawater greenhouse. Desalination (Amsterdam) 159(3): 283-288
Hattori, T.; Nakamura, M.; Watanabe, T. 2003: Simulation of fretting-fatigue life by using stress-singularity parameters and fracture mechanics. Tribology International 36(2): 87-97
Zeise, B.; Liebich, R.; Prolss, M. 2014: Simulation of fretting wear evolution for fatigue endurance limit estimation of assemblies. Wear 316(1-2): 49-57
Steiner, L.; Bouvier, V.; May, U.; Huber, N. 2010: Simulation of friction and wear in DLC/steel contacts for different loading histories and geometries: Ball-on-plate configuration and piston-cylinder-contacts. Tribology International 43(8): 1410-1416
Spiegelberg, C.; Andersson, S. 2006: Simulation of friction and wear in the contact between the valve bridge and rocker arm pad in a cam mechanism. Wear 261(1): 58-67
Xi, T.A.N.; Rogers, R.J. 1998: Simulation of friction in multi-degree-of-freedom vibration systems. Journal of Dynamic Systems, Measurement, and Control 120(1): 144-146
Delhommelle, J.; Cummings, P.T. 2005: Simulation of friction in nanoconfined fluids for an arbitrarily low shear rate. Physical Review B. Condensed Matter and Materials Physics 72(17): 172201.1-172201.4
Bres, A.; Monsarrat, B.; Dubourg, L.; Birglen, L.; Perron, C.; Jahazi, M.; Baron, L. 2010: Simulation of friction stir welding using industrial robots. Industrial Robot 37(1): 36-50
Markov, A.A.; Filimonov, I.A.; Martirosyan, K.S. 2012: Simulation of front motion in a reacting condensed two phase mixture. Journal of Computational Physics 231(20): 6714-6724
Ibragimov, K.Y.U. 1992: Simulation of frontal cloudiness in the atmospheres of giant planets. I : Method of calculations. Kinematika i Fizika Nebesnyh Tel 8(2): 15-24
Jinliang, W.A.N.G.; Houqing, W.A.N.G.; Changren, T.O.N.G.; Wenhai, Z.H.A.N.G.; Chuanfu, Z.H.A.N.G. 2013: Simulation of Frozen Slag Inside Brickless Reaction Shaft of Flash Smelting Furnace. Metallurgical and Materials Transactions. B, Process Metallurgy and Materials Processing Science 44(6): 1572-1579
Liu, X.Q.; Wang, C.H.; Law, C.K. 1984: Simulation of fuel droplet gasification in Sl engines. Journal of Engineering for Gas Turbines and Power 106(4): 849-853
Tasic, M.B.; Veljkovic, V.B. 2011: Simulation of fuel ethanol production from potato tubers. Computers and Chemical Engineering 35(11): 2284-2293
Milton, B.E.; Behnia, M.; Chen, P.Y.P.; Blakeley, M.R. 1994: Simulation of fuel film formation in ducts. Finite Elements in Analysis and Design 18(1-3): 349-363
Withalm, M.; Hoffmann, N.P. 2010: Simulation of full-scale ice-structure-interaction by an extended Matlock-model. Cold Regions Science and Technology 60(2): 130-136
Hauke, M. 2004: Simulation of full vehicle misuse behavior. Sae Transactions 113(6): 21-29
Belhocine, A.; Bouchetara, M. 2012: Simulation of fully coupled thermomechanical analysis of automotive brake discs. Simulation (San Diego, Calif.) 88(8): 921-935
Gorelenkov, N.N.; Konovalov, S.V.; Mirnov, S.V. 1992: Simulation of fusion a-component in a Tokamak with He3 plasma and high power NBI. Phys. Scr. (Print) 45(2): 180-183
Yu Ge, D.O.N.G.; Xin Zhao, C.H.E.N.; Hyun Deog, C.H.O.; Jong Wan, K.W.O.N. 2003: Simulation of fuzzy reliability indexes. Ksme International Journal 17(4): 492-500
Djafari Rouhani, M.; Laroussi, M.; Amrani, A.; Esteve, D. 1990: Simulation of GaAs/CdTe heteroepitaxial growth. J. Cryst. Growth 101(1-4): 122-125
Mains, R.K.; Haddad, G.I.; Blakey, P.A. 1983: Simulation of GaAs IMPATT diodes including energy and velocity transport equations. Ieee Trans. Electron Devices ED 30(10): 1327-1338
Gopinath, A.; Atwater, H. 1988: Simulation of GaAs p-i-n diodes. Ieee Trans. Electron Devices 35(4): 414-417
Tomiza, K.; Awano, Y.; Hashizume, N.; Kawashima, M. 1983: Simulation of GaAs submicron fet with hot-electron injection structure. Electronics Letters 19(17): 697-698
Tafti, H.A.; Sheeba, V.S.; Kamath, K.K.; Farokhrooz, F.N.; Vaya, P.R. 1996: Simulation of gain-switched picosecond pulse generation from quantum well lasers. Optical and Quantum Electronics 28(11): 1669-1676
Jia, J.X.; Atrens, A.; Song, G.; Muster, T.H. 2005: Simulation of galvanic corrosion of magnesium coupled to a steel fastener in NaCl solution. Materials and Corrosion (1995) 56(7): 468-474
Zinigrad, E.; Aurbach, D.; Dan, P. 2001: Simulation of galvanostatic growth of polycrystalline Li deposits in rechargeable Li batteries. Electrochimica Acta 46(12): 1863-1869
Bamford, G.J.; Rester, A.C.; Coldwell, R.L. 1992: Simulation of gamma-ray current pulse shapes produced in a high purity germanium detector. Ieee Trans. Nucl. Sci 39(4): 595-597
Alptekin, E.; Aktas, O. 2006: Simulation of GaN and AlGaN static induction transistors. Solid-State Electronics 50(5): 741-749
Poochinda, K.; Chen, T.C.; Stoebe, T.G.; Ricker, N.L. 2004: Simulation of GaN and InGaN p-i-n and n-i-n photo-devices. J. Cryst. Growth 261(2-3): 336-340
Cole, P.; Collins, P.A. 1986: Simulation of gas and oil flow in hydrocarbon reservoirs - Simulation de l'écoulement de gaz et d'huile dans les réservoirs d'hydrocarbure. Quarterly Journal of Engineering Geology 19(2): 121-132
Chang, Y.P.; Hu, S.Y.; Chen, S.C. 1998: Simulation of gas-assisted injection mold-cooling process using line source model approach for gas channel. International Communications in Heat and Mass Transfer 25(7): 989-998
Dose, E.V. 1987: Simulation of gas chromatographic retention and peak width using thermodynamic retention indexes. Analytical Chemistry 59(19): 2414-2419
Astrakhan, I.M.; Egorushkin, S.A.; Isaev, V.I.; Rozenberg, G.D.; Slobodkina, F.A. 1994: Simulation of gas-condensate well blowout under permafront conditions. Fluid Dynamics 29(3): 380-385
Tayfun Erkeskin, K.; Friedrichs, H.A.; Dahl, W.; Lange, K.W. 1993: Simulation of gas dispersion in a metallurgical bubble reactor. Steel Research 64(12): 581-587
Guo, B.; Langrish, T.A.G.; Fletcher, D.F. 2003: Simulation of gas flow instability in a spray dryer. Chemical Engineering Research and Design 81(6): 631-638
Ueno, S.; Tazume, K.; Eguchi, H. 1993: Simulation of gas flows in magnetic curtain. IEEE Translation Journal on Magnetics in Japan 8(4): 255-259
Wang, G.X.; Litster, J.D.; Yu, A.B. 2000: Simulation of Gas-liquid flow in dripping zone of blast furnace involving impermeable fused layers. Isij International 40(7): 627-636
Andreani, M.; Paladino, D. 2010: Simulation of gas mixing and transport in a multi-compartment geometry using the GOTHIC containment code and relatively coarse meshes. Nuclear Engineering and Design 240(6): 1506-1527
Rossen, R.H.; Shen, E.I.C. 1989: Simulation of gas/oil drainage and water/oil imbibition in naturally fractured reservoirs. Spe Annual Technical Conference (Dallas 1987) 4(4): 464-470
Voloshin, D.G.; Klopovskiy, K.S.; Mankelevich, Y.A.; Popov, N.A.; Rakhimova, T.V.; Rakhimov, A.T. 2007: Simulation of Gas-Phase Kinetics in CHF3 : H2 : O2 Mixtures. IEEE Transactions on Plasma Science 35(6): 1691-1703
Lu, N.; Ross, B. 1994: Simulation of gas phase transport of carbon-14 at Yucca mountain, Nevada. Waste Management (Elmsford) 14(5): 409-420
Nourollahi, E. 2009: Simulation of gas pipeline leakage using the characteristics method. Wit Transactions On Engineering Sciences v. 65: 119-130
Frerichs, F.; Lubben, T.; Fritsching, U.; Lohner, H.; Rocha, A.; Lowisch, G.; Hoffmann, F.; Mayr, P. 2004: Simulation of gas quenching. J. Phys., Iv 120: 727-735
Li, K.; Acharya, R.; Hughes, R. 1991: Simulation of gas separation in an internally staged permeator. Chemical Engineering Research and Design 69(1): 35-42
Ouyang, J.; Yu, A.B.; Pan, R.H. 2005: Simulation of gas-solid flow in vertical pipe by hard-sphere model. Particulate Science and Technology 23(1): 47-61
Shah, M.T.; Utikar, R.P.; Tade, M.O.; Pareek, V.K.; Evans, G.M. 2011: Simulation of gas-solid flows in riser using energy minimization multiscale model: Effect of cluster diameter correlation. Chem. Eng. Sci 66(14): 3291-3300
Rajan, K.S.; Srivastava, S.N.; Pitchumani, B.; Mohanty, B. 2006: Simulation of gas-solid heat transfer during pneumatic conveying : Use of multiple gas inlets along the duct. International Communications in Heat and Mass Transfer 33(10): 1234-1242
Farouk, T.; Farouk, B.; Gutsol, A. 2009: Simulation of gas species and temperature separation in the counter―flow Ranque―Hilsch vortex tube using the large eddy simulation technique. International Journal of Heat and Mass Transfer 52(13-14): 3320-3333
Treille, E.; Wendling, J.; Plas, F. 2011: Simulation of Gas Transfer at the Scale of a Disposal cell in the Context of High-Level and Long-Lived Radwaste Disposal in a Deep Clay Formation during the Operating Phase. Nucl. Technol 174(3): 353-363
Slutsky, A.S.; Khoo, M.C.K.; Brown, R. 1985: Simulation of gas transport due to cardiogenic oscillations. Journal of Applied Physiology (1985) 58(4): 1331-1339
Zhang, J.; Nieh, S. 1997: Simulation of gaseous combustion and heat transfer in a vortex combustor. Numerical Heat Transfer. Part A, Applications 32(7): 697-713
Bellhouse, G.M.; Whittington, H.W. 1996: Simulation of gaseous emissions from electricity generating plant. Electrical Power and Energy Systems 18(8): 501-507
Wagner, R.J.; Gulari, E. 2004: Simulation of Ge/Si intermixing during heteroepitaxy. Physical Review B. Condensed Matter and Materials Physics 69(19): 195312.1-195312.6
Stauffer, D.; Eicke, H.F. 1992: Simulation of gelation for gelatin in microemulsions. Physica. a 182(1-2): 29-32
James, J.; Sasikumar, R. 1997: Simulation of gelation of sols by liquid removal using a cluster-cluster aggregation model. Acta Materialia 45(6): 2535-2546
Bolton, C.E.; Green, N.J.B.; Pimblott, S.M. 1994: Simulation of geminate ion recombination kinetics in anisotropic media. Chemical Physics Letters 221(1-2): 175-182
Kawalec, A.; Wiktor, J. 2008: Simulation of generation and tooth contact analysis of helical gears with crowned flanks. Proceedings of the Institution of Mechanical Engineers. Part B. Journal of Engineering Manufacture 222(9): 1147-1160
Andreev, S.N.; Garanin, S.G.; Rukhadze, A.A.; Tarakanov, V.P.; Yakutov, B.P. 2010: Simulation of generation of bremsstrahlung gamma quanta upon irradiation of thin metal films by ultra-intense femtosecond laser pulses. Quantum Electronics (Woodbury) 40(4): 355-362
Rackliffe, G.B.; Crouse, J.C.; Legro, J.R.; Kruse, V.J. 1988: Simulation of geomagnetic currents induced in a power system by magnetohydrodynamic electromagnetic pulses. IEEE/PES Winter Meeting (New Orleans 1987) 3(1): 392-397
Mazaud, A.; Laj, C. 1989: Simulation of geomagnetic polarity reversals by a model of interacting dipole sources - Simulation des inversions de polarité géomagnétique par un modèle de sources de dipole interactant. Earth and Planetary Science Letters 92(3-4): 299-306
Chen, J.; Slinker, S.; Fedder, J.A.; Lyon, J.G. 1995: Simulation of geomagnetic storms during the passage of magnetic clouds. Geophysical Research Letters 22(13): 1749-1752
Marti, L.; Yiu, C.; Rezaeizare, A.; Boteler, D. 2014: Simulation of Geomagnetically Induced Currents With Piecewise Layered-Earth Models. IEEE Transactions on Power Delivery 29(4): 1886-1893
Shijian, Z.H.O.U.; Stormont, J.; Zhen, C.H.E.N. 1999: Simulation of geomembrane response to settlement in landfills by using the material point method. International Journal for Numerical and Analytical Methods in Geomechanics 23(15): 1977-1994
Kozubowski, T.J.; Panorska, A.K. 1999: Simulation of geometric stable and other limiting multivariate distributions arising in random summation scheme. Mathematical and Computer Modelling 29(10-12): 255-262
Melnyk, I.V. 2006: Simulation of geometry of high voltage glow discharge electrodes' systems, formed profile electron beams. All-Russian Seminar on Problems of Theoretical and Applied Electron and Ion Optics: 627809.1-627809.13
Hogan, P.J.; Hurlburt, H.E.; Jacobs, G.; Wallcraft, A.J.; Teague, W.J.; Mitchell, J.L. 1992: Simulation of GEOSAT, TOPEX/Poseidon, and ERS-1 altimeter data from a 1/8° Pacific Ocean model : effects of space-time resolution on mesoscale sea surface height variability. Marine Technology Society Journal 26(2): 98-107
Anistchik, V.M.; Markevich, M.I.; Podoltsev, A.S.; Piskunov, F.A.; Yanushkevich, V.A. 1996: Simulation of GeP formation in reactive liquid environment under puls laser treatment. Fizika i Himia Obrabotki Materialov (2): 20-24
Zybura, M.F.; Jones, J.R.; Jones, S.H.; Tait, G.B. 1995: Simulation of 100-300 GHz solid-state harmonic sources. Ieee Trans. Microwave Theor. Tech 43(4): 955-961
Lizhu, T.O.N.G.; Nanbu, K.; Fukunishi, H. 2005: Simulation of gigantic jets propagating from the top of thunderclouds to the ionosphere. Earth, Planets and Space 57(7): 613-617
Garciaolivares, A.; Herrero, C. 2013: Simulation of glacial-interglacial cycles by simple relaxation models: consistency with observational results. Climate Dynamics 41(5-6): 1307-1331
Asao, H.; Nara, M.; Asai, T.; Yamamoto, H. 2000: Simulation of glass fibre forming. Glass Technology 41(4): 135-139
Angell, C.A. 1995: Simulation of glasses and glass-forming liquids after two decades : some perspectives. Comput. Mater. Sci 4(4): 285-291
Boyd, R.H.; Krishna Pant, P.V. 1991: Simulation of glassy polymethylene starting from the equilibrated liquid. Macromolecules 24(14): 4078-4083
Berthet, J.C.; Saelee, C.; Taining, L.I.A.N.G.; Nicholson, T.M.; Davies, G.R. 2006: Simulation of glassy state relaxations in polymers : A static analysis of methyl group and methoxy group rotation in poly(vinyl methyl ether). Macromolecules 39(23): 8186-8192
Berthet, J.C.; Davies, G.R. 2008: Simulation of Glassy State Relaxations in Polymers : Prediction of the Dielectric Loss Spectrum Due to Methoxy Group Rotation in Poly(vinyl methyl ether). Macromolecules 41(6): 2278-2282
Budenkova, O.N.; Vasiliev, M.G.; Yuferev, V.S.; Bystrova, E.N.; Kalaev, V.V.; Bermudez, V.; Dieguez, E.; Makarov, Y.N. 2004: Simulation of global heat transfer in the Czochralski process for BGO sillenite crystals. J. Cryst. Growth 266(1-3): 103-108
Ehnberg, J.S.G.; Bollen, M.H.J. 2005: Simulation of global solar radiation based on cloud observations. Ises Solar World Congress 78(2): 157-162
Liming, Z.H.A.N.G.; Dongsheng, Y.U.; Xuezheng, S.H.I.; Weindorf, D.C.; Limin, Z.H.A.O.; Weixin, D.I.N.G.; Hongjie, W.A.N.G.; Jianjun, P.A.N.; Changsheng, L.I. 2009: Simulation of global warming potential (GWP) from rice fields in the Tai-Lake region, China by coupling 1:50,000 soil database with DNDC model. Atmospheric Environment (1994) 43(17): 2737-2746
Ercolessi, F.; Parrinello, M.; Tosatti, E. 1988: Simulation of gold in the glue model - Simulation de l'or dans un modèle de cohésion. Interatomic Forces in relation to Defects and Disorder in Condensed Matter. Conference (1987) 58(1): 213-226
Radke, W.; Gerber, J.; Wittmann, G. 2003: Simulation of GPC-distribution coefficients of linear and star-shaped molecules in spherical pores. 2. Comparison of simulation and experiment. Polymer (Guildford) 44(3): 519-525
Poole, M.; Sanchez Lopez, H.; Ozaki, O.; Kitaguchi, H.; Nakajima, I.; Urayama, S.I.; Sato, K.I.; Fukuyama, H.; Crozier, S. 2011: Simulation of Gradient-Coil-Induced Eddy Currents and Their Effects on a Head-Only HTS MRI Magnet. IEEE Transactions on Applied Superconductivity 21(6): 3592-3598
Berezkin, A.V.; Khalatur, P.G.; Khokhlov, A.R. 2006: Simulation of gradient copolymers synthesis via conformation-dependent graft copolymerization near a uniform adsorbing surface. Macromolecules 39(25): 8808-8815
Geiger, J.; Roosz, A.; Barkoczy, P. 2001: Simulation of grain coarsening in two dimensions by cellular-automaton. Acta Materialia 49(4): 623-629
Tikare, V.; Holm, E.A. 1998: Simulation of grain growth and pore migration in a thermal gradient. J. Am. Ceram. Soc 81(3): 480-484
Shinagawa, K. 2014: Simulation of grain growth and sintering process by combined phase-field/discrete-element method. Acta Materialia 66: 360-369
Novikov, V.Y. 1999: Simulation of grain growth in thin films with columnar microstructure. Acta Materialia 47(18): 4507-4514
Zhan, X.H.; Dong, Z.B.; Wei, Y.H.; Ma, R. 2009: Simulation of grain morphologies and competitive growth in weld pool of Ni-Cr alloy. Journal of Crystal Growth 311(23-24): 4778-4783
Lorenz, B. 1989: Simulation of grain-size distributions in nucleation and growth processes. Acta Metallurgica 37(10): 2689-2692
Syamlal, M.; Obrien, T.J. 1988: Simulation of granular layer inversion in liquid fluidized beds. International Journal of Multiphase Flow 14(4): 473-481
Herrmann, H.J. 1992: Simulation of granular media. Physica, A 191(1-4): 263-276
Fiori, G.; Iannaccone, G. 2007: Simulation of graphene nanoribbon field-effect transistors. IEEE Electron Device Letters 28(8): 760-762
Xiang, Y.; An, X.; Cercone, N. 2003: Simulation of graphical models for multiagent probabilistic inference. Simulation (San Diego, Calif.) 79(10): 545-567
Yang, L.I.Z.H.O.N.G.; Ye, J.U.N.Q.I.; Wang, Y.A.F.E.I. 2011: Simulation of gravity currents using the thermal lattice Boltzmann method. International Journal for Numerical Methods in Fluids 66(9): 1174-1182
Yi, C.H.E.N.; Dudley, M.; Sanchez, E.K.; Macmillan, M.F. 2008: Simulation of Grazing-Incidence Synchrotron White Beam X-ray Topographic Images of Micropipes in 4H-SiC and Determination of Their Dislocation Senses. Journal of Electronic Materials 37(5): 713-720
Yilmaz, O.; Incecik, A.; Han, J.C. 2003: Simulation of green water flow on deck using non-linear dam breaking theory. Ocean Engineering 30(5): 601-610
Lashansky, S.N.; Benyosef, N.; Weitz, A. 1993: Simulation of ground-based infrared cloudy sky images. Optical Engineering (Bellingham. Print) 32(6): 1290-1297
Janna, C.; Ferronato, M.; Gambolati, G.; Teatini, P. 2010: Simulation of ground failure due to groundwater pumping. Iahs-Aish Publ 339: 133-135
Stone, K.J.L.; Brown, T.A. 1993: Simulation of ground loss in centrifuge model tests. Astm Geotechnical Testing Journal 16(2): 253-258
Hu, W.; Mei, L.; Li, H. 1996: Simulation of ground state structure of nickel cluster (n≤40). Solid State Communications 100(2): 129-131
Lemieux, J.M.; Sudicky, E.A. 2010: Simulation of groundwater age evolution during the Wisconsinian glaciation over the Canadian landscape. Environmental Fluid Mechanics (2001) 10(1-2): 91-102
Laszlo, F.; Szekely, F. 1989: Simulation of groundwater flow and redox processes around bank-filtration wells - Simulation de l'écoulement des eaux souterraines et des processus redox autour d'un système de filtration d'un puits. Groundwater Contamination. Symposium. International Association of Hydrological Sciences. Scientific Assembly 3 (Baltimore 1989) (185): 51-55
Poulsen, S.E.; Christensen, S.; Rasmussen, K.R.; Werner, A.D. 2011: Simulation of groundwater flow and salt transport in a shallow microtidal barrier aquifer during a storm surge. Iahs-Aish Publ 345: 55-61
Kallioras, A.; Pliakas, F.; Diamantis, I. 2010: Simulation of Groundwater Flow in a Sedimentary Aquifer System Subjected to Overexploitation. Water, Air and Soil Pollution 211(1-4): 177-201
Meenal, M.; Eldho, T.I. 2011: Simulation of groundwater flow in unconfined aquifer using meshfree point collocation method. Engineering Analysis with Boundary Elements 35(4): 700-707
Ujfaludi, L.; Maginecz, J. 1986: Simulation of groundwater flow influenced by a reservoir at drainage basins near Esztergom and Komarom - Simulation de l'écoulement souterrain provoqué par un barrage à des bassins de drainage près de Esztergom et Komarom. Iahs-Aish Publication (156): 135-142
Ahlberg, T.; Soveri, J. 1988: Simulation of groundwater head and chloride concentration in a water supply area. Nhp-Rapp (22-2): 340-349
Narayan, K.A.; Armstrong, D. 1995: Simulation of groundwater interception at Lake Ranfurly, Victoria, incorporation variable density flow and solute transport. Journal of Hydrology (Amsterdam) 165(1-4): 161-184
Godeke, S. 2011: Simulation of groundwater mounding at a West Australian mine site. Environmental Earth Sciences 64(5): 1363-1373
Jarsjo, J.; Alekseeva, I.; Schrum, C.; Destouni, G. 2006: Simulation of groundwater-seawater interactions in the Aral Sea basin by a coupled water balance model. Iahs-Aish Publ: 261-267
Watanabe, Y.; Yamamoto, N.; Komori, K.; Nakamura, H.; Sugimoto, Y.; Tanaka, Y.; Ikeda, N.; Asakawa, K.; Inoue, K. 2004: Simulation of group-velocity-dependent phase shift induced by refractive-index change in an air-bridge-type AlGaAs two-dimensional photonic crystal slab waveguide. Journal of the Optical Society of America. B, Optical Physics 21(10): 1833-1838
Lafage, M.; Russier, V.; Badiali, J.P. 1998: Simulation of growth and corrosion during the formation of a passive layer. Journal of Electroanalytical Chemistry (1992) 450(2): 203-212
Nilsen, O.; Karlsen, O.B.; Kjekshus, A.; Fjellvag, H. 2007: Simulation of growth dynamics for nearly epitaxial films. Journal of Crystal Growth 308(2): 366-375
Nilsen, O.; Karlsen, O.B.; Kjekshus, A.; Fjellvag, H. 2007: Simulation of growth dynamics in atomic layer deposition. Part I. Amorphous films. Thin Solid Films 515(11): 4527-4537
Nilsen, O.; Karlsen, O.B.; Kjekshus, A.; Fjellvag, H. 2007: Simulation of growth dynamics in atomic layer deposition. Part II. Polycrystalline films from cubic crystallites. Thin Solid Films 515(11): 4538-4549
Nilsen, O.; Karlsen, O.B.; Kjekshus, A.; Fjellvag, H. 2007: Simulation of growth dynamics in atomic layer deposition. Part III. Polycrystalline films from tetragonal crystallites. Thin Solid Films 515(11): 4550-4558
Arnold, N.; Kullmer, R.; Bauerle, D. 1993: Simulation of growth in pyrolytic laser-CVD of microstructures. I: One-dimensional approach. Microelectronic Engineering 20(1-2): 31-41
Arnold, N.; Bauerle, D. 1993: Simulation of growth in pyrolytic laser-CVD of microstructures. II: Two-dimensional approach. Microelectronic Engineering 20(1-2): 43-54
Burlakov, V.M.; Tsukahara, Y.; Briggs, G.A.D.; Sutton, A.P. 2002: Simulation of growth of porous SiOx nanostructures. Mater. Sci. Technol 18(7): 739-742
Qi, H.J.; Shao, J.D.; Zhang, D.P.; Yi, K.; Fan, Z.X. 2005: Simulation of growth process of thin film on non-planar substrate. Applied Surface Science 249(1-4): 85-90
Harding, J.H. 1992: Simulation of growth processes. Philosophical Transactions-Royal Society of London. Physical Sciences and Engineering 341(1661): 283-291
Baek, B.J.; Kang, S.J.; Kim, J.T.; Pak, B.; Lee, C.R. 2007: Simulation of growth rate and deposition profile on the periodically patterned substrate. Journal of Crystal Growth 304(1): 211-218
Yoshikawa, N.; Kikuchi, A. 1994: Simulation of growth rate of chemical-vapour-deposited TiN film along the axial direction in a tubular reactor. Materials Transactions - Jim 35(9): 611-615
Yoshikawa, N.; Kikuchi, A. 1997: Simulation of growth rate variation of CVD-Mo film along axial direction in horizontal tubular reactor. Materials Transactions - Jim 38(4): 299-305
Egorov, A.A.; Lovetskii, K.P.; Sevastyanov, A.L.; Sevastyanov, L.A. 2010: Simulation of guided modes (eigenmodes) and synthesis of a thin-film generalised waveguide Luneburg lens in the zero-order vector approximation. Quantum Electronics (Woodbury) 40(9): 830-836
Petherbridge, J.R.; May, P.W.; Shallcross, D.E.; Harvey, J.N.; Fuge, G.M.; Rosser, K.N.; Ashfold, M.N.R. 2003: Simulation of H-C-S containing gas mixtures relevant to diamond chemical vapour deposition. Diamond and Related Materials 12(12): 2178-2185
Piters, T.M.; Alvarezgarcia, S. 2002: Simulation of H-centre migration along dislocation lines applied to UV-induced afterglow in Eu doped alkali halides. Radiat. Eff. Defect Solid 157(6-12): 705-708
Rozhansky, V.; Kaveeva, E.; Molchanov, P.; Veselova, I.; Voskoboynikov, S.; Coster, D.; Counsell, G.; Kirk, A.; Lisgo, S.; Asdexu, T. 2009: Simulation of H-modes discharges in ASDEX-Upgrade and MAST. J. Nucl. Mater 390-91: 408-411
Hama, T.; Asakawa, M.; Fukiharu, H.; Makinouchi, A. 2004: Simulation of hammering hydroforming by static explicit FEM. Isij International 44(1): 123-128
Garciahernandez, C.F.; Hughes, C.J. 1986: Simulation of handover conditions for cellular radio systems. Electronics Letters 22(17): 904-905
Chungkwei, L.I.N.; Chungchieh, L.I.N.; Berndt, C.C. 1995: Simulation of hardness testing on plasma-sprayed coatings. Journal of the American Ceramic Society 78(5): 1406-1410
Runciman, N.; Vagenas, N.; Corkal, T. 1997: Simulation of haulage truck loading techniques in an underground mine using WITNESS. Simulation (San Diego, Calif.) 68(5): 291-299
Lan, K.; Fill, E.E.; Meyertervehn, J. 2003: Simulation of He-α and Ly-α soft X-ray lasers in helium pumped by DESY/XFEL-radiation. Europhysics Letters 64(4): 454-460
Eshel, A. 1991: Simulation of head contour effects in helical scan video recording©. Tribology Transactions 34(4): 573-576
Ponnaganti, V.; White, J.W. 1989: Simulation of head-disk collisions in magnetic recording. Tribol. Trans 32(2): 258-266
Matsuo, A.; Inutake, R.; Shinagawa, K.; Saito, T.; Tsushima, T. 1998: Simulation of head-medium interaction in magnetic recording. J. Magn. Magn. Mater 177-81: 909-910
Noreen Sher, A.K.B.A.R.; Nadeem, S. 2010: Simulation of heat and chemical reactions on Reiner Rivlin fluid model for blood flow through a tapered artery with a stenosis. Heat and Mass Transfer 46(5): 531-539
Palancz, B. 1985: Simulation of heat and mass transfer in a finite porous medium using orthogonal collocation method. Warme- und Stoffubertragung 19(3): 229-233
Raach, H.; Mitrovic, J. 2007: Simulation of heat and mass transfer in a multi-effect distillation plant for seawater desalination. Desalination (Amst.) 204(1-3): 416-422
Alikhani, Z.; Raghavan, G.S.V. 1991: Simulation of heat and mass transfer in corn-zeolite mixtures. International Communications in Heat and Mass Transfer 18(6): 791-804
Majchrzak, E.; Szopa, R. 1998: Simulation of heat and mass transfer in domain of solidifying binary alloy. Archives of Metallurgy 43(4): 341-351
Akram, S.; Nadeem, S. 2012: Simulation of heat and mass transfer on peristaltic flow of hyperbolic tangent fluid in an asymmetric channel. International Journal for Numerical Methods in Fluids 70(12): 1475-1493
Kozdoba, L.A. 1996: Simulation of heat and mass transfer processes and a system approach. Journal of Engineering Physics and Thermophysics 69(6): 797-806
Khairiddinov, B.E. 1993: Simulation of heat and mass transfer processes in a solar greenhousedryer operating in the drying regime. Applied Solar Energy 29(3): 49-53