A study on wall-to-bed heat transfer in a conical fluidized bed combustor
Abdelmotalib, H.M.; Ko, D.G.; Im, I.
Applied Thermal Engineering 99: 928-937
2016
ISSN/ISBN: 1359-4311 Accession: 081414134
PDF emailed within 1 workday: $29.90
Related References
Luan, W.; Bowen, B.D.; Lim, C.J.; Brereton, C.M.H.; Grace, J.R. 2000: Suspension-to-membrane-wall heat transfer in a circulating fluidized bed combustor International Journal of Heat and Mass Transfer 43(7): 1173-1185Golriz, M.R. 1996: Suspension-to-wall heat transfer in a 12-MWth circulating fluidized-bed combustor International Journal of Energy Research 20(7): 569-579
Gnanapragasam, N.V.; Reddy, B.V. 2009: Numerical modeling of axial bed-to-wall heat transfer in a circulating fluidized bed combustor International Journal of Heat and Mass Transfer 52(7-8): 1657-1666
Gnanapragasam, N.V.; Reddy, B.V. 2008: Numerical modeling of bed-to-wall heat transfer in a circulating fluidized bed combustor based on cluster energy balance International Journal of Heat and Mass Transfer 51(21-22): 5260-5268
Nirmal Vijay, G.; Reddy, B.V. 2005: Effect of dilute and dense phase operating conditions on bed-to-wall heat transfer mechanism in a circulating fluidized bed combustor International Journal of Heat and Mass Transfer 48(16): 3276-3283
Ziegelhoeffer A.; De Jong J.W.; Ferrari R.; Turi Nagy L. 1993: An investigation of fluidized-bed scaling: heat transfer measurements in a pressurized fluidized-bed combustor and a cold model bed Chemical Engineering Science 48(8): 1459-1473
Achara, N.; Horsley, M.E.; Purvis, M.R.I.; Teague, R.H. 1988: Zonal heat transfer rates in a fluidized bed combustor International Journal of Heat and Mass Transfer 31(3): 577-582
Gui Young Han; Yong Jun Cho 1999: Radiative heat transfer in a circulating fluidized bed coal combustor Powder Technology 102(3): 266-273
Nag, P.K.; Sallam Ali, M.; Reddy, B.V. 1993: Heat transfer in a circulating fluidized bed combustor burning indane gas Indian Journal of Technology 31(1): 9-12
Ziegelhoeffer A.; De Jong J.W.; Ferrari R.; Turi Nagy L. 1981: Mechanisms of heat transfer between a surface and a gas-fluidized bed for combustor application Progress in Energy and Combustion Science 7(2): 73-102
Kim, J.; Kim, S.; Lee, C.; Kang, Y.; Choi, M. 2004: Temperature fluctuations and heat transfer in a fluidized-bed combustor of waste oil Korean Journal of Chemical Engineering 21(5): 1081-1086
Grewal, N.S.; Menart, J.; Hajicek, D.R.; Zobeck, B.J. 1987: Heat transfer to horizontal tubes immersed in a fluidized-bed combustor Powder Technology 52(2): 149-159
Ziegelhoeffer A.; De Jong J.W.; Ferrari R.; Turi Nagy L. 1989: Suspension-to-Surface heat transfer in a circulating-fluidized-bed combustor Aiche Journal 35(10): 1685-1691
Sirisomboon, K.; Laowthong, P. 2019: Experimental investigation and prediction of heat transfer in a swirling fluidized-bed combustor Applied Thermal Engineering 147: 718-727
Lu, Y.; Zhang, T.; Dong, X. 2015: Bed to wall heat transfer in supercritical water fluidized bed: Comparison with the gas–solid fluidized bed Applied Thermal Engineering 88: 297-305
Yumin, C.H.A.N.G.; Yufu, L.O.; Mayyenn, C.H.E.N. 1990: Heat transfer measurements of a 1.0 ton-steam/HR circulating fluidized-bed combustor burning Taiwan coals Particulate Science and Technology 8(3-4): 199-208
Bardakci, T.; Molayem, B. 1989: Experimental studies of heat transfer to horizontal tubes in a pilot-scale fluidized-bed combustor Canadian Journal of Chemical Engineering 67(2): 348-351
Shukrie, A.; Anuar, S.; Alias, A. 2015: Heat Transfer of Alumina Sands in Fluidized Bed Combustor with Novel Circular Edge Segments Air Distributor Energy Procedia 75: 1752-1757
Koppel, L.B.; Patel, R.D.; Holmes, J.T. 1970: Statistical models for surface renewal in heat and mass transfer. Part IV: Wall to fluidized bed heat transfer coefficients Aiche Journal 16(3): 464-471
Abdelmotalib, H.M.; Im, I. 2017: Three dimensional modeling of heat transfer and bed flow in a conical fluidized bed reactor International Journal of Heat and Mass Transfer 106: 1335-1344