Home
  >  
Section 84

EurekaMag Full Text Articles Chapter 83,876



References:

Kim, W.; Aicher, T. 1997: Experimental investigation of heat transfer in shell- and- tube heat exchangers without baffles. Korean Journal of Chemical Engineering 14(2): 93-100
Wengler, C.; Addy, J.; Luke, A. 2018: Experimental investigation of heat transfer of R134a in pool boiling on stainless steel and aluminum tubes. Heat and Mass Transfer 55(1): 59-66
Xu, X.; Zhang, Y.; Liu, C.; Zhang, S.; Dang, C. 2018: Experimental investigation of heat transfer of supercritical CO 2 cooled in helically coiled tubes based on exergy analysis. International Journal of Refrigeration 89: 177-185
Uysal, U.; Taymaz, I. 2019: Experimental investigation of heat transfer on trapezoidal channel with three passes. Journal of Thermal Analysis and Calorimetry 140(3): 953-964
Solangi, K.H.; Amiri, A.; Luhur, M.R.; Akbari Ghavimi, S.A.; Kazi, S.N.; Badarudin, A.; Mohd Zubir, M.N. 2016: Experimental investigation of heat transfer performance and frictional loss of functionalized GNP-based water coolant in a closed conduit flow. RSC Advances 6(6): 4552-4563
Wang, J.; Li, Y.; Wang, Y.; Yang, L.; Kong, X.; Sundén, B. 2020: Experimental investigation of heat transfer performance of a heat pipe combined with thermal energy storage materials of Cu O-paraffin nanocomposites. Solar Energy 211: 928-937
Allain, H.; Baudouy, B.; Quintard, M.; Prat, M. 2015: Experimental investigation of heat transfer through porous media in superfluid helium. Cryogenics 66: 53-62
He, J.; Dang, C.; Hihara, E. 2018: Experimental investigation of heat transfer to supercritical R245fa flowing vertically upward in a circular tube. International Journal of Heat and Mass Transfer 127: 286-295
Shi, Y.; Dai, C.; Ma, Z.; Guo, Z. 2017: Experimental investigation of heat transfer with ash deposition in ultra-low temperature WHRS of coal-fired power plant. Applied Thermal Engineering 123: 1181-1189
Gvozdić, B.; Dung, O.; Alméras, E.; van Gils, D.P.; Lohse, D.; Huisman, S.G.; Sun, C. 2019: Experimental investigation of heat transport in inhomogeneous bubbly flow. Chemical Engineering Science 198: 260-267
Pastore, N.; Cherubini, C.; Giasi, C.; Redondo, J. 2017: Experimental investigation of heat transport through single synthetic fractures. Energy Procedia 125: 327-334
Miura, M.; Nagasaki, T.; Ito, Y. 2017: Experimental investigation of heat transport with oscillating liquid column in pulsating heat pipe using forced oscillation system. International Journal of Heat and Mass Transfer 106: 997-1004
Murugu Nachippan, N.; Alphonse, M.; Bupesh Raja, V.; Shasidhar, S.; Varun Teja, G.; Harinath Reddy, R. 2021: Experimental investigation of hemp fiber hybrid composite material for automotive application. Materials Today: Proceedings 44: 3666-3672
Jurski, K.; Géhin, E.; Attoui, M. 1997: Experimental investigation of heterogeneous condensation of water vapour on atmospheric aerosol and dop nuclei through a converging diverging nozzle. Journal of Aerosol Science 28: S161-S162
Pandy, A.; Landsberger, L.M.; Nikpour, B.; Paranjape, M.; Kahrizi, M. 1998: Experimental investigation of high Si/Al selectivity during anisotropic etching in tetra-methyl ammonium hydroxide. Journal of Vacuum Science-Technology A: Vacuum, Surfaces, and Films 16(2): 868-872
Foroutan, R.; Nemes, J.; Ghiasi, H.; Hubert, P. 2013: Experimental investigation of high strain-rate behaviour of fabric composites. Composite Structures 106: 264-269
Espy, M.A.; Matlashov, A.N.; Kraus Jr., R.H.; Volegov, P.; Maharajh, K. 2002: Experimental investigation of high temperature superconducting imaging surface magnetometry. Review of Scientific Instruments 73(6): 2360-2363
Liu, D.; Luo, Y.; Shang, X. 2015: Experimental investigation of high temperature thermal contact resistance between high thermal conductivity C/C material and Inconel 600. International Journal of Heat and Mass Transfer 80: 407-410
Yuan, M.; Yan, D.; Zhong, H.; Liu, Y. 2017: Experimental investigation of high-cycle fatigue behavior for prestressed concrete box-girders. Construction and Building Materials 157: 424-437
Richecoeur, F.; Ducruix, S.; Scouflaire, P.; Candel, S. 2008: Experimental investigation of high-frequency combustion instabilities in liquid rocket engine. Acta Astronautica 62(1): 18-27
Gardner, A.D.; Richter, K.; Mai, H.; Neuhaus, D. 2014: Experimental investigation of high-pressure pulsed blowing for dynamic stall control. CEAS Aeronautical Journal 5(2): 185-198
Li, S.; Chen, T.; Qiu, C.; Wang, D.; Liu, X. 2017: Experimental investigation of high-speed hard turning by PCBN tooling with strengthened edge. International Journal of Advanced Manufacturing Technology 92(9-12): 3785-3793
Pan, Z.; Gu, B.; Sun, B. 2015: Experimental investigation of high-strain rate properties of 3-D braided composite material in cryogenic field. Composites Part B: Engineering 77: 379-390
Marty, J.; Réthoré, J.; Combescure, A. 2016: Experimental investigation of higher-order homogenization schemes under large strain. International Journal of Solids and Structures 88-89: 263-273
Di Capua, M.; Creedon, J.; Huff, R. 1976: Experimental investigation of high‐current relativistic electron flow in diodes. Journal of Applied Physics 47(5): 1887-1896
Xu, L.; Huang, Y.; Wang, J.; Liu, C.; Liu, L.; Zou, L.; Yue, J.; Chen, K. 2019: Experimental investigation of high‐temperature corrosion properties in simulated reducing‐sulphidizing atmospheres of the waterwall fireside in the boiler. The Canadian Journal of Chemical Engineering 98(4): 905-918
Boyou, N.V.; Ismail, I.; Wan Sulaiman, W.R.; Sharifi Haddad, A.; Husein, N.; Hui, H.T.; Nadaraja, K. 2019: Experimental investigation of hole cleaning in directional drilling by using nano-enhanced water-based drilling fluids. Journal of Petroleum Science and Engineering 176: 220-231
Yuan, J.; Hou, L.; Wei, D.; Wang, H.; Zhou, G. 2008: Experimental investigation of hollow-core photonic crystal fibers with five photonic band-gaps. Optoelectronics Letters 4(4): 253-256
Muhumuza, R.; Zacharopoulos, A.; Mondol, J.D.; Smyth, M.; Pugsley, A.; Giuzio, G.F.; Kurmis, D. 2019: Experimental investigation of horizontally operating thermal diode solar water heaters with differing absorber materials under simulated conditions. Renewable Energy 138: 1051-1064
Stahl, B.; Emunds, H.; Gülhan, A. 2009: Experimental investigation of hot and cold side jet interaction with a supersonic cross-flow. Aerospace Science and Technology 13(8): 488-496
Nidhin Raj, A. 2021: Experimental investigation of hot tensile properties of Al-8Si-0.4 Mg alloy with varying Ni addition. Materials Today: Proceedings 46: 5072-5077
Reggiani, B.; Donati, L.; Ben Tahar, M.; Tomesani, L. 2017: Experimental investigation of hot-work tool steels performances under the creep-fatigue regime. International Journal of Advanced Manufacturing Technology 94(5-8): 1957-1967
Hostikka, S.; Veikkanen, E.; Hakkarainen, T.; Kajolinna, T. 2020: Experimental investigation of human tenability and sprinkler protection in hospital room fires. Fire and Materials 45(6): 823-832
Dhinakaran, V.; Vijayakumar, M.; Muthu, G.; Sathish, T.; Bupathi ram, P. 2021: Experimental investigation of hybrid fibre reinforced polymer composite material and its microstructure properties. Materials Today: Proceedings 37: 1799-1803
Dlugosch, M.; Lukaszewicz, D.; Fritsch, J.; Hiermaier, S. 2016: Experimental investigation of hybrid material systems consisting of advanced composites and sheet metal. Composite Structures 152: 840-849
Monroe, J.; Briggs, F. 1968: Experimental investigation of hybrid mode operation in oversized Gunn effect devices. Proceedings of the IEEE 56(11): 2066-2068
Rejvani, M.; Saedodin, S.; Vahedi, S.M.; Wongwises, S.; Chamkha, A.J. 2019: Experimental investigation of hybrid nano-lubricant for rheological and thermal engineering applications. Journal of Thermal Analysis and Calorimetry 138(2): 1823-1839
Bbosa, B.; Ozbayoglu, E.; Volk, M. 2018: Experimental investigation of hydrate formation, plugging and flow properties using a high-pressure viscometer with helical impeller. Journal of Petroleum Exploration and Production Technology 9(2): 1089-1104
Das, P.; Khan, M.; Rasul, M.; Wu, J.; Youn, I. 2018: Experimental investigation of hydrodynamic and heat transfer effects on scaling in an agitated tank. Chemical Engineering and Processing - Process Intensification 128: 245-256
Liu, N.; Zhang, Q.; Chin, G.; Ong, E.; Lou, J.; Kang, C.; Liu, W.; Jordan, E. 2010: Experimental investigation of hydrodynamic behavior in a real membrane bio-reactor unit. Journal of Membrane Science 353(1-2): 122-134
Ehinmowo, A.B.; Ogunleye, O.O.; Orodu, O.D. 2016: Experimental investigation of hydrodynamic slug mitigation potential of an intermittent absorber. Chemical Engineering Research and Design 113: 50-60
Angeline Divya, G.; Sakthibalan, R.; Sumithra Parvadha Varthini, K.; Deepa, K.; Samdavid, S. 2019: Experimental investigation of hydrodynamics and chromium(VI) adsorption in continuous countercurrent fluidized column. Chemical Papers 74(4): 1281-1288
Gujjula, R.; Mangadoddy, N. 2015: Experimental investigation of hydrodynamics of gas-solid flow in an internally circulating fluidized bed. The Canadian Journal of Chemical Engineering 93(8): 1380-1391
Rocha, H.M.Z.; Pereira, R.d.S.; Nogueira, M.F.M.; Belchior, C.R.P.; Tostes, M.E.d.L. 2017: Experimental investigation of hydrogen addition in the intake air of compressed ignition engines running on biodiesel blend. International Journal of Hydrogen Energy 42(7): 4530-4539
Barghi, S.H.; Tsotsis, T.T.; Sahimi, M. 2016: Experimental investigation of hydrogen adsorption in doped silicon-carbide nanotubes. International Journal of Hydrogen Energy 41(1): 369-374
Chintala, V.; Subramanian, K. 2016: Experimental investigation of hydrogen energy share improvement in a compression ignition engine using water injection and compression ratio reduction. Energy Conversion and Management 108: 106-119
Vajda, M.; Ursu, D.; Mosoarca, C.; Duteanu, N.; Miclau, M. 2020: Experimental investigation of hydrogen insertion in copper oxide on photovoltaic performance of p ‐type dye‐sensitized solar cell. International Journal of Energy Research 45(4): 5309-5317
Rabbani, M.; Dincer, I.; Naterer, G. 2016: Experimental investigation of hydrogen production in a photo-electrochemical chloralkali processes reactor. International Journal of Hydrogen Energy 41(19): 7766-7781
Shokouhi, M.; Jalili, A.H.; Zoghi, A.T. 2017: Experimental investigation of hydrogen sulfide solubility in aqueous sulfolane solution. The Journal of Chemical Thermodynamics 106: 232-242
Strandberg, R.; Das, D. 2018: Experimental investigation of hydronic air coil performance with nanofluids. International Journal of Heat and Mass Transfer 124: 20-35
Bahiraei, M.; Gharagozloo, K. 2020: Experimental investigation of hydrothermal characteristics for flow within a circular tube equipped with twisted conical strip inserts under different alignments. Journal of the Taiwan Institute of Chemical Engineers 114: 24-35
Rahim, M.; Douzane, O.; Tran Le, A.; Promis, G.; Langlet, T. 2017: Experimental investigation of hygrothermal behavior of two bio-based building envelopes. Energy and Buildings 139: 608-615
Yuan, C.K.; Jiang, Z.L. 2021: Experimental investigation of hypersonic flight-duplicated shock tunnel characteristics. Acta Mechanica Sinica 37(3): 422-433
Pan, B.; Wang, W.; Chu, D.; Mei, L.; Zhang, Q. 2016: Experimental investigation of hypervapotron heat transfer enhancement with alumina–water nanofluids. International Journal of Heat and Mass Transfer 98: 738-745
Li, D.; Chang, H.; Zuo, Z.; Wang, H.; Li, Z.; Wei, X. 2020: Experimental investigation of hysteresis on pump performance characteristics of a model pump-turbine with different guide vane openings. Renewable Energy 149: 652-663
Klepka, A.; Dziedziech, K.; Spytek, J.; Mrówka, J.; Górski, J. 2018: Experimental investigation of hysteretic stiffness related effects in contact-type nonlinearity. Nonlinear Dynamics 95(2): 1513-1528
Bi, Y.; Yu, M.; Wang, H.; Huang, J.; Lyu, T. 2019: Experimental investigation of ice melting system with open and closed ice-storage tanks combined internal and external ice melting processes. Energy and Buildings 194: 12-20
Susainathan, J.; Eyma, F.; De Luycker, E.; Cantarel, A.; Castanie, B. 2018: Experimental investigation of impact behavior of wood-based sandwich structures. Composites Part A: Applied Science and Manufacturing 109: 10-19
Farshidnia, S.; Saneie, M.; Hajikandi, H.; Rostami, M. 2020: Experimental investigation of impact of length and height of parallel skimming walls on controlling inlet sediment to lateral intake. Water Supply 20(3): 997-1005
Bhambure, S.; Rao, A. 2021: Experimental investigation of impact strength of kenaf fiber reinforced polyester composite. Materials Today: Proceedings 46: 1134-1138
Chen, Z.N. 2000: Experimental investigation of impedance characteristics of patch antennas with finite-size substrates. Microwave and Optical Technology Letters 25(2): 107-111
Isman, M.K.; Can, M. 2016: Experimental investigation of impingement heat transfer from a round rib-roughened surface. Heat and Mass Transfer 53(4): 1405-1412
Hafizi, A.; Rahimpour, M.; Heravi, M. 2019: Experimental investigation of improved calcium-based CO2 sorbent and Co3O4/Si O2 oxygen carrier for clean production of hydrogen in sorption-enhanced chemical looping reforming. International Journal of Hydrogen Energy 44(33): 17863-17877
Şahin, Z.; Durgun, O.; Kurt, M. 2015: Experimental investigation of improving diesel combustion and engine performance by ethanol fumigation-heat release and flammability analysis. Energy Conversion and Management 89: 175-187
Senthil Kumar, K.; Revanth, S.; Sanjeev, D.; Sabesh Kumar, P.; Surya, P. 2021: Experimental investigation of improving the energy conversion efficiency of PV cell by integrating with PCM. Materials Today: Proceedings 37: 712-716
Feng, R.; Harpalani, S.; Saurabh, S. 2018: Experimental investigation of in situ stress relaxation on deformation behavior and permeability variation of coalbed methane reservoirs during primary depletion. Journal of Natural Gas Science and Engineering 53: 1-11
Heidary, H.; Kermani, M.J.; Advani, S.G.; Prasad, A.K. 2016: Experimental investigation of in-line and staggered blockages in parallel flowfield channels of PEM fuel cells. International Journal of Hydrogen Energy 41(16): 6885-6893
Wang, X.; Lam, C.C.; Iu, V.P. 2018: Experimental investigation of in-plane shear behaviour of grey clay brick masonry panels strengthened with SRG. Engineering Structures 162: 84-96
Meysel, P.; Oellrich, L.; Raj Bishnoi, P.; Clarke, M.A. 2011: Experimental investigation of incipient equilibrium conditions for the formation of semi-clathrate hydrates from quaternary mixtures of (CO2+ N2+ TBAB + H2O). The Journal of Chemical Thermodynamics 43(10): 1475-1479
Taklifi, A.; Akhavan-Behabadi, M.A.; Hanafizadeh, P.; Aliabadi, A. 2016: Experimental investigation of inclination effect on subcritical and supercritical water flows heat transfer in an internally ribbed tube. Heat and Mass Transfer 53(2): 635-647
Hayashi, H.; Hayashida, A.; Jia, A.; Takahashi, K.; Yoshikawa, A. 2001: Experimental investigation of inclusion of hexagonal Ga N phase-domain by varying nitrogen-beam direction to a 〈111〉 axis in MBE growth of cubic Ga N. Journal of Crystal Growth 227-228: 404-409
Tang, Z.; Mohan, A. 2005: Experimental investigation of indoor MIMO Ricean channel capacity. IEEE Antennas and Wireless Propagation Letters 4: 55-58
Talaghat, M. 2014: Experimental investigation of induction time for double gas hydrate formation in the simultaneous presence of the PVP and l-Tyrosine as kinetic inhibitors in a mini flow loop apparatus. Journal of Natural Gas Science and Engineering 19: 215-220
Lian, Y.; Mu, C.; Xie, C.; Yao, B. 2019: Experimental investigation of inductively coupled plasma etching on cemented carbides. Vacuum 162: 101-109
Heidemann, A.; Anderson, I.; Prager, M.; Press, W. 1983: Experimental investigation of inelastic neutron scattering structure factors of three dimensional rotators. Zeitschrift fr Physik B Condensed Matter 51(4): 319-326
Reid, S.; Reddy, T. 1983: Experimental investigation of inertia effects in one-dimensional metal ring systems subjected to end impact - I. Fixed-ended systems. International Journal of Impact Engineering 1(1): 85-106
Bathurst, R.J.; Siemens, G.; Ho, A.F. 2009: Experimental investigation of infiltration ponding in one-dimensional sand–geotextile columns. Geosynthetics International 16(3): 158-172
Wang, Y.; Song, W. 2019: Experimental investigation of influence factors on flame holding in a supersonic combustor. Aerospace Science and Technology 85: 180-186
Chen, C.; Xu, T.; Zhou, G.; Qin, T. 2019: Experimental investigation of influence of alternating cyclic loadings on creep behaviors of sandstone. Mechanics of Time-Dependent Materials 25(1): 1-19
Wang, Y.; Feng, J.; Li, X. 2019: Experimental investigation of influence of well spacing on hydrate dissociation by heat stimulation in sandy sediment. Energy Procedia 158: 5699-5704
Alwashali, H.; Sen, D.; Jin, K.; Maeda, M. 2019: Experimental investigation of influences of several parameters on seismic capacity of masonry infilled reinforced concrete frame. Engineering Structures 189: 11-24
Nagasundaram, N.; Devi, R.S.; Rajkumar, M.K.; Sakthivelrajan, K.; Arravind, R. 2021: Experimental investigation of injection moulding using thermoplastic polyurethane. Materials Today: Proceedings 45: 2286-2288
Tian, Q.; Wang, S.; Yang, Z.; McNamara, M.E.; Benton, M.J.; Jiang, B. 2020: Experimental investigation of insect deposition in lentic environments and implications for formation of Konservat Lagerstätten. Palaeontology 63(4): 565-578
Kaufmann, E.; Hagermann, A. 2017: Experimental investigation of insolation-driven dust ejection from Mars' CO2 ice caps. Icarus 282: 118-126
Sun, Z.; Zheng, X.; Kawakubo, T. 2018: Experimental investigation of instability inducement and mechanism of centrifugal compressors with vaned diffuser. Applied Thermal Engineering 133: 464-471
Pradhan, M.K.; Yew, K.J.H. 2012: Experimental investigation of insulation parameters affecting power transformer condition assessment using frequency domain spectroscopy. IEEE Transactions on Dielectrics and Electrical Insulation 19(6): 1851-1859
Benedik, G.; Širok, B.; Markič, I.; Eberlinc, M. 2011: Experimental investigation of integral and local flow field properties on rotating porous disc. Heat and Mass Transfer 47(6): 679-690
Dyatlov, M.K.; Kas'yan, V.G.; Levin, V.G. 1979: Experimental investigation of intensity fluctuations in the emission of continuous cadmium and selenium vapor lasers. Journal of Applied Spectroscopy 30(6): 719-724
Karl, A.; Frohn, A. 2000: Experimental investigation of interaction processes between droplets and hot walls. Physics of Fluids 12(4): 785-796
Tsioulou, O.T.; Lampropoulos, A.P.; Dritsos, S.E. 2013: Experimental investigation of interface behaviour of RC beams strengthened with concrete layers. Construction and Building Materials 40: 50-59
Hammoudah, S.M.; Chaudhary, M.T.; Essawy, A.S. 2018: Experimental investigation of interface stiffness between concrete masonry infill and reinforced concrete frames. Engineering Structures 171: 779-793
Jayakesh, K.; Suresha, S. 2018: Experimental investigation of interface treatment technique on interface shear bond fatigue behavior of Ultra-Thin Whitetopping. Construction and Building Materials 161: 489-500
Zhang, D.; Zhan, Z. 2016: Experimental investigation of interfaces in graphene materials/copper composites from a new perspective. RSC Advances 6(57): 52219-52226
Roudet, M.; Billet, A.; Cazin, S.; Risso, F.; Roig, V. 2016: Experimental investigation of interfacial mass transfer mechanisms for a confined high‐reynolds‐number bubble rising in a thin gap. AIChE Journal 63(6): 2394-2408
Liang, Y.; Yeh, T.J.; Ma, C.; Zhang, Q.; Yang, D.; Hao, Y. 2020: Experimental investigation of internal erosion behaviours in inclined seepage flow. Hydrological Processes 34(26): 5315-5326
Zhang, C.; Liu, H.; Li, H. 2014: Experimental investigation of intestinal frictional resistance in the starting process of the capsule robot. Tribology International 70: 11-17
Luengo, J.; Joshi, N. 1995: Experimental investigation of intra-shell transitions of Cr2+ in Zn1 − x Crx S. Materials Letters 25(1-2): 65-67
Imbert, M.; Comas-Cardona, S.; Abisset-Chavanne, E.; Prono, D. 2018: Experimental investigation of intra-tow fluid storage mechanisms in dual-scale fiber reinforcements. Composites Part A: Applied Science and Manufacturing 107: 70-82
Franchin, A.; Ehrhart, S.; Leppä, J.; Nieminen, T.; Gagné, S.; Schobesberger, S.; Wimmer, D.; Duplissy, J.; Riccobono, F.; Dunne, E.M.; Rondo, L.; Downard, A.; Bianchi, F.; Kupc, A.; Tsagkogeorgas, G.; Lehtipalo, K.; Manninen, H.E.; Almeida, J.; Amorim, A.; Wagner, P.E.; Hansel, A.; Kirkby, J.; Kürten, A.; Donahue, N.M.; Makhmutov, V.; Mathot, S.; Metzger, A.; Petäjä, T.; Schnitzhofer, R.; Sipilä, M.; Stozhkov, Y.; Tomé, A.; Kerminen, V.; Carslaw, K.; Curtius, J.; Baltensperger, U.; Kulmala, M. 2015: Experimental investigation of ion–ion recombination under atmospheric conditions. Atmospheric Chemistry and Physics 15(13): 7203-7216
Khazaee, I.; Ghazikhani, M. 2012: Experimental investigation of irreversibility of a proton exchange membrane fuel cell at different channel geometry. Heat and Mass Transfer 48(12): 1985-1994
Sokolov, V.; Sen, A.K. 2003: Experimental investigation of isotope scaling of anomalous ion thermal transport. Physics of Plasmas 10(8): 3174-3180
Basha, S.; Dave, H.; Patel, H. 2021: Experimental investigation of jatropha curcas bio-oil and biodiesel in electric discharge machining of Ti-6Al-4V. Materials Today: Proceedings 38: 2102-2109
Hasan, H.A.; Sopian, K.; Jaaz, A.H.; Al-Shamani, A.N. 2017: Experimental investigation of jet array nanofluids impingement in photovoltaic/thermal collector. Solar Energy 144: 321-334
Narushima, Y.; Saito, S.; Yoshida, H.; Abe, Y. 2019: Experimental investigation of jet fragment diameter in BWR complicated structures using image processing techniques. Journal of Nuclear Science and Technology 56(12): 1157-1170
Karaiskos, G.; Papanicolaou, P.; Zacharopoulos, D. 2016: Experimental investigation of jet pulse control on flexible vibrating structures. Mechanical Systems and Signal Processing 76-77: 1-14
Meslem, A.; Greffet, R.; Nastase, I.; Ammar, A. 2014: Experimental investigation of jets from rectangular six-lobed and round orifices at very low Reynolds number. Meccanica 49(10): 2419-2437
Erkaya, S.; Uzmay, . 2010: Experimental investigation of joint clearance effects on the dynamics of a slider-crank mechanism. Multibody System Dynamics 24(1): 81-102
Prabhu B, S. R.; Shettigar, A.; Herbert, M. A.; Rao, S. S. 2021: Experimental investigation of joint properties of friction stir welded aluminium matrix composite. Materials Today: Proceedings 46: 8917-8920
Altug, M.; Erdem, M.; Ozay, C. 2015: Experimental investigation of kerf of Ti6Al4V exposed to different heat treatment processes in WEDM and optimization of parameters using genetic algorithm. International Journal of Advanced Manufacturing Technology 78(9-12): 1573-1583
Vinogradov, V.A.; Kobigsky, S.A.; Petrov, M.D. 1995: Experimental investigation of kerosene fuel combustion in supersonic flow. Journal of Propulsion and Power 11(1): 130-134
Sun, W.; Vassilopoulos, A.P.; Keller, T. 2015: Experimental investigation of kink initiation and kink band formation in unidirectional glass fiber-reinforced polymer specimens. Composite Structures 130: 9-17
Alrbai, M.; Hayajneh, H.S.; Omar, A.; Alkader, M.A.; Al-Riaty, H. 2021: Experimental investigation of lab scale solar powered Electrodialysis system with corrugated membrane configuration. Solar Energy 224: 390-400
Pal, S.; Saha, S.K. 2015: Experimental investigation of laminar flow of viscous oil through a circular tube having integral axial corrugation roughness and fitted with twisted tapes with oblique teeth. Heat and Mass Transfer 51(8): 1189-1201
Brodowicz, K.; Kierkus, W. 1966: Experimental investigation of laminar free-convection flow in air above horizontal wire with constant heat flux. International Journal of Heat and Mass Transfer 9(2): 81-93
Vorkov, V.; Aerens, R.; Vandepitte, D.; Duflou, J.R. 2017: Experimental investigation of large radius air bending. International Journal of Advanced Manufacturing Technology 92(9-12): 3553-3569
Burdonskii, I N.; Leonov, A G.; Makarov, K N.; Yufa, V N. 2020: Experimental investigation of laser ablation of stone polycrystalline targets. Quantum Electronics 50(8): 763-769
Safari, M.; Farzin, M. 2015: Experimental investigation of laser forming of a saddle shape with spiral irradiating scheme. Optics-Laser Technology 66: 146-150
Shahabad, S.I.; Naeini, H.M.; Roohi, A.H.; Tavakoli, A.; Nasrollahzade, M. 2016: Experimental investigation of laser forming process to produce dome-shaped products. International Journal of Advanced Manufacturing Technology 90(1-4): 1051-1057
Liu, S.; Liu, W.; Kovacevic, R. 2015: Experimental investigation of laser hot-wire cladding. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 231(6): 1007-1020
Hongchao, Q. 2015: Experimental investigation of laser peening on Ti17 titanium alloy for rotor blade applications. Applied Surface Science 351: 524-530
Lei, M.; Gong, M.; Zhang, H.; Liu, Q.; Wang, Y. 2007: Experimental investigation of laser power addition with composite four-mirror cavity. Laser Physics Letters 4(1): 16-19
Dinesh Babu, P.; Buvanashekaran, G.; Balasubramanian, K.R. 2012: Experimental investigation of laser transformation hardening of low alloy steel using response surface methodology. International Journal of Advanced Manufacturing Technology 67(5-8): 1883-1897
Korti, A.I.N.; Tlemsani, F.Z. 2016: Experimental investigation of latent heat storage in a coil in PCM storage unit. Journal of Energy Storage 5: 177-186
Berardi, U.; Soudian, S. 2019: Experimental investigation of latent heat thermal energy storage using PCMs with different melting temperatures for building retrofit. Energy and Buildings 185: 180-195
Zheng, W.; Lu, W.; Liu, W.; Wang, L.; Ling, Z. 2015: Experimental investigation of laterally loaded double-shear-nail connections used in midply wood shear walls. Construction and Building Materials 101: 761-771
Maksimov, .I.; Solomonov, V.B. 1978: Experimental investigation of laws governing chemical processes in an ideal-mixing flowthrough reactor. Combustion, Explosion, and Shock Waves 13(4): 497-500
Chung, K.L.; Mohan, A.S. 2007: Experimental investigation of layer displacements for a singly-fed circularly polarized stacked patch antenna. Microwave and Optical Technology Letters 49(8): 2047-2050
Kumar, A.; Dwivedi, P.; Kumar, D.; Kumar, A. 2015: Experimental investigation of light induced defects in amorphous thin films of Se90X10 (X = Sb, In, Ag). Optik 126(24): 5001-5007
Wang, W.; Chen, S.; Tao, K.; Gao, K.; Wei, X. 2017: Experimental investigation of limit drawing ratio for AZ31B magnesium alloy sheet in warm stamping. International Journal of Advanced Manufacturing Technology 92(1-4): 723-731
Matsumoto, S.; Sakai, T. 2001: Experimental investigation of linear amplification characteristics of radio-frequency thin-film SOi power MOSFETs. IEEE Transactions on Electron Devices 48(12): 2911-2916
Kelly, M.R.; Schmid, S.R.; Adams, D.C.; Fletcher, J.; Heard, R. 2019: Experimental investigation of linear friction welding of AISi 1020 steel with pre-heating. Journal of Manufacturing Processes 39: 26-39
Astrath, D.; Lottes, F.; Vu, D.T.; Arlt, W.; Stenby, E.H. 2007: Experimental investigation of liquid chromatography columns by means of computed tomography. Adsorption 13(1): 9-19
Meriakri, V.; Nikitin, I.; Pan, C.; Pan, R.; Parkhomenko, M.; Chigryai, E. 2010: Experimental investigation of liquid crystals in the millimetre frequency range. Liquid Crystals 37(11): 1453-1457
Bizjan, B.; Širok, B.; Blagojevič, M. 2021: Experimental investigation of liquid disintegration by twin spinning wheel atomizer. Chemical Engineering Research and Design 165: 230-241
Kumar, P.; Sarkar, S. 2019: Experimental investigation of liquid disintegration on slotted disc in centrifugal atomization process. Chemical Engineering Research and Design 145: 76-84
Sun, D.; Zhang, J.; Xiang, Y.; Tian, W.; Liu, J.; Zhang, P.; Qiu, S. 2015: Experimental investigation of liquid entrainment in vertical up tee branch with double-end gas inlets. Annals of Nuclear Energy 76: 315-322
Chen, T.; Chen, H.; Liang, W.; Huang, B.; Xiang, L. 2019: Experimental investigation of liquid nitrogen cavitating flows in converging-diverging nozzle with special emphasis on thermal transition. International Journal of Heat and Mass Transfer 132: 618-630
Buffone, C.; Grishaev, V.; Glushchuk, A. 2016: Experimental investigation of liquid retention in a cyclone evaporator under variable gravity conditions. Applied Thermal Engineering 99: 235-243
Tongsh, C.; Liang, Y.; Xie, X.; Li, L.; Liu, Z.; Du, Q.; Jiao, K. 2021: Experimental investigation of liquid water in flow field of proton exchange membrane fuel cell by combining X-ray with EIS technologies. Science China Technological Sciences 64(10): 2153-2165
Zhang, R.; Taskinen, P. 2016: Experimental investigation of liquidus and phase stability in the Ba O–Si O 2 binary system. Journal of Alloys and Compounds 657: 770-776
Li, W.; Liu, X. 2020: Experimental investigation of lithium isotope fractionation during kaolinite adsorption: Implications for chemical weathering. Geochimica et Cosmochimica Acta 284: 156-172
Pan, J.; Xu, T.; Hu, Z. 2007: Experimental investigation of load carrying capacity of the slender reinforced concrete columns wrapped with FRP. Construction and Building Materials 21(11): 1991-1996
Petersen, E.; Stefaniak, D.; Hühne, C. 2017: Experimental investigation of load carrying mechanisms and failure phenomena in the transition zone of locally metal reinforced joining areas. Composite Structures 182: 79-90
McCormick, D.C.; Paterson, R.W.; Weingold, H.D. 1991: Experimental investigation of loading effects on compressor trailing-edge flowfields. Journal of Propulsion and Power 7(2): 288-296
Kumar, S.; Singh, P.K.; Karn, K.N.; Bhasin, V. 2016: Experimental investigation of local tensile and fracture resistance behaviour of dissimilar metal weld joint: SA508 Gr.3 Cl.1 and SA312 Type 304LN. Fatigue-Fracture of Engineering Materials-Structures 40(2): 190-206
Becque, J.; Rasmussen, K.J. 2009: Experimental investigation of local-overall interaction buckling of stainless steel lipped channel columns. Journal of Constructional Steel Research 65(8-9): 1677-1684
Boţilă, T.; Vancu, A.; Lăzărescu, M.; Vescan, L.; Ioanid, G.; Slădaru, S. 1972: Experimental investigation of localized states in amorphous chalcogenide films. Thin Solid Films 12(2): 223-226
Zhang, X.; Rasmussen, K.J.; Zhang, H. 2016: Experimental investigation of locally and distortionally buckled portal frames. Journal of Constructional Steel Research 122: 571-583
Kelasidi, E.; Kohl, A.; Pettersen, K.; Hoffmann, B.; Gravdahl, J. 2018: Experimental investigation of locomotion efficiency and path-following for underwater snake robots with and without a caudal fin. Annual Reviews in Control 46: 281-294
Blum, H.; Rasmussen, K. 2019: Experimental investigation of long-span cold-formed steel double channel portal frames. Journal of Constructional Steel Research 155: 316-330
Abid, M.; Abu Hassan, H.; Hassan, Z.; Ng, S.; Mohd. Bakhori, S.; Abd. Raof, N. 2011: Experimental investigation of long-wavelength optical lattice vibrations in quaternary Alx Iny Ga1−x−y N alloys and comparison with results from the pseudo-unit cell model. Physica B: Condensed Matter 406(8): 1379-1384
Cornelius, C.S.; Kubitza, W.K. 1970: Experimental investigation of longitudinal wave propagation in an elastic rod with coulomb friction. Experimental Mechanics 10(4): 137-144
He, S.; Zhao, J.; Liu, Z.; Tian, W.; Yang, J.; Liu, W. 2018: Experimental investigation of loop heat pipe with a large squared evaporator for cooling electronics. Applied Thermal Engineering 144: 383-391
Cyrus, V. 1985: Experimental investigation of losses and secondary flow in an axial compressor stage. Forschung im Ingenieurwesen 51(2): 33-40
Schler, P.; Hardt, K.; Gnther, C.; Freitag, K.; Herzog, P.; Niederwestberg, H.; Reif, H.; Shera, E.B.; Hoehn, M.V. 1983: Experimental investigation of low lying excited states in201Hg. Zeitschrift fr Physik A Atoms and Nuclei 313(4): 305-309
Gong, X.; Pei, P.; Hu, Y.; Chen, X. 2018: Experimental investigation of low velocity impact on textile cellular composite with different energy construction. Journal of Industrial Textiles 48(6): 1009-1023
Martines, E.; Zuin, M.; Antoni, V.; Cavazzana, R.; Serianni, G.; Spolaore, M.; Nakashima, C. 2004: Experimental investigation of low-frequency waves propagating in a direct current planar magnetron plasma. Physics of Plasmas 11(5): 1938-1946
Lewis, R.; Wang, Y.; Bradley, P.E.; Huber, M.L.; Radebaugh, R.; Lee, Y. 2013: Experimental investigation of low-pressure refrigerant mixtures for micro cryogenic coolers. Cryogenics 54: 37-43
Uber, C.; Shekhar, R.; Felgner, A.; Koenders, L.; Gerlach, U. 2017: Experimental investigation of low-voltage spark ignition caused by separating electrodes. Journal of Loss Prevention in the Process Industries 49: 822-831
Feng, Y.; Hung, T.; He, Y.; Wang, Q.; Chen, S.; Wu, S.; Lin, C. 2019: Experimental investigation of lubricant oil on a 3 k W organic Rankine cycle (ORC) using R123. Energy Conversion and Management 182: 340-350
Tzeng, S.; Ma, W.; Lin, C.; Jywe, W.; Liu, C.; Wang, Y. 2007: Experimental investigation of lubrication and cooling effects of high-speed rotating machines. International Journal of Advanced Manufacturing Technology 35(3-4): 394-399
Bühler, C.A. 2015: Experimental investigation of lunar dust impact wear. Wear 342-343: 244-251
Katahira, K.; Matsumoto, Y.; Komotori, J.; Yamazaki, K. 2017: Experimental investigation of machinability and surface quality of sapphire machined with polycrystalline diamond micro-milling tool. International Journal of Advanced Manufacturing Technology 93(9-12): 4389-4398
Rajeswari, B.; Amirthagadeswaran, K. 2017: Experimental investigation of machinability characteristics and multi-response optimization of end milling in aluminium composites using RSM based grey relational analysis. Measurement 105: 78-86
Song, H.; Dan, J.; Chen, X.; Xiao, J.; Xu, J. 2018: Experimental investigation of machinability in laser-assisted machining of fused silica. International Journal of Advanced Manufacturing Technology 97(1-4): 267-278
Bandapalli, C.; Singh, K.K.; Sutaria, B.M.; Bhatt, D.V. 2015: Experimental investigation of machinability parameters in high-speed micro-end milling of titanium (grade-2). International Journal of Advanced Manufacturing Technology 85(9-12): 2139-2153
Mohanty, S.; Routara, B.; Bhuayan, R. 2017: Experimental investigation of machining characteristics for Al-Si C12% composite in Electro-discharge machining. Materials Today: Proceedings 4(8): 8778-8787
Jagatheesan, K.; Babu, K.; Madhesh, D. 2021: Experimental investigation of machining parameter in MQL turning operation using AISi 4320 alloy steel. Materials Today: Proceedings 46: 4331-4335
Lee, E.S.; Goh, T.S.; Lee, J.S.; Heo, J.; Kim, G.; Lee, C. 2019: Experimental investigation of macroscopic material nonlinear behavior and microscopic void volume fraction change for porous materials under uniaxial compression. Composites Part B: Engineering 163: 130-138
Sanusi, K.O.; Akinlabi, E.T. 2018: Experimental investigation of magnesium alloy processed by friction stir process using stainless steel powder as matrix composite. Materials Today: Proceedings 5(9): 18468-18474
More, A.K.; Chanmanwar, R.M. 2019: Experimental investigation of magnetorheological finishing on copper alloy. Materials Today: Proceedings 19: 312-316
Yamada, S.; Chang, N.S.; Matsuo, Y. 1982: Experimental investigation of magnetostatic surface wave amplification in Ga As‐yttrium iron garnet layered structure. Journal of Applied Physics 53(8): 5979-5981
Yoo, J.; Park, Y. 2011: Experimental investigation of magnetostrictive do D inkjet head for droplet formation. Current Applied Physics 11(1): S353-S359
Kumar, R.; Patil, D.; Xiao, F.; Aras, P. 2017: Experimental investigation of maldistribution in vertical plate falling film tower. Chemical Engineering Communications 204(11): 1237-1245
Mazhar, H.; Ewing, D.; Cotton, J.; Ching, C. 2013: Experimental investigation of mass transfer in 90° pipe bends using a dissolvable wall technique. International Journal of Heat and Mass Transfer 65: 280-288
Baxley, P.A. 1998: Experimental investigation of matched‐field processing in a wedgelike shallow‐water environment. Journal of the Acoustical Society of America 103(5): 3029-3030
K., M.A.K.; Sahithi, V.; Vijaya Krishna Varma, K. 2021: Experimental investigation of mechanical and fracture behaviour of casted alumina (AA6061-Si C-flyash) metal matrix composites. Materials Today: Proceedings 46: 528-538
Mehmanparast, A.; Taylor, J.; Brennan, F.; Tavares, I. 2018: Experimental investigation of mechanical and fracture properties of offshore wind monopile weldments: SLIC interlaboratory test results. Fatigue-Fracture of Engineering Materials-Structures 41(12): 2485-2501
Prabhu, P.; Mohamed Iqbal, S.; Balaji, A.; Karthikeyan, B. 2018: Experimental investigation of mechanical and machining parameters of hybrid nanoclay glass fiber-reinforced polyester composites. Advanced Composites and Hybrid Materials 2(1): 93-101
Sathish, S.; Kumaresan, K.; Prabhu, L.; Gokulkumar, S.; Karthi, N.; Vigneshkumar, N. 2020: Experimental investigation of mechanical and morphological properties of flax fiber reinforced epoxy composites incorporating Si C and Al2O3. Materials Today: Proceedings 27: 2249-2253
Maclin John Vasanth, K.; Lokendar Ram, P.; Pon Anand, V.; Prabu, M.; Rahul, S. 2020: Experimental investigation of mechanical and tribological properties of Aluminium metal matrix composites fabricated by powder metallurgy route – a review. Materials Today: Proceedings 33: 1058-1072
Palanikumar, V.; Narayanan, V.; Vajjiram, S. 2016: Experimental investigation of mechanical and viscoelastic properties of Acacia Niloticafiller blended polymer composite. Polymer Composites 39(7): 2535-2546
Kalyana Sundaram, R.; Sivashanmugam, N.; Shameer, D.; Deepak, R.; Saikrishnan, G. 2021: Experimental investigation of mechanical properties and drilling characteristics on polymer matrix composite materials. Materials Today: Proceedings 43: 1057-1063
Annamalai, I.; Karthik, K.; Kumar, N.; Muthuselvan, S.; Vignesh, M.; Dhanush, Y. 2021: Experimental investigation of mechanical properties of GLARE composite with different layup sequences. Materials Today: Proceedings 46: 1371-1375
Santhi, K.A.; Srinivas, C.; Kumar, R.A. 2021: Experimental investigation of mechanical properties of Jute-Ramie fibres reinforced with epoxy hybrid composites. Materials Today: Proceedings 39: 1309-1315
Hong, S.Y.; Kim, Y.C.; Wang, M.; Kim, H.; Byun, D.; Nam, J.; Chou, T.; Ajayan, P.M.; Ci, L.; Suhr, J. 2018: Experimental investigation of mechanical properties of UV-Curable 3D printing materials. Polymer 145: 88-94
Altun, F.; Tanrıöven, F.; Dirikgil, T. 2013: Experimental investigation of mechanical properties of hybrid fiber reinforced concrete samples and prediction of energy absorption capacity of beams by fuzzy-genetic model. Construction and Building Materials 44: 565-574
Baig, W.; Mushtaq, M. 2021: Experimental investigation of mechanical properties on tamarind shell -reinforced epoxy composite laminates. Materials Today: Proceedings 45: 257-263
Habibi, M.; Hashemi, R.; Fallah Tafti, M.; Assempour, A. 2018: Experimental investigation of mechanical properties, formability and forming limit diagrams for tailor-welded blanks produced by friction stir welding. Journal of Manufacturing Processes 31: 310-323
Chang, X.; Peng, Y.; Zhu, Z.; Gong, X.; Yu, Z.; Mi, Z.; Xu, C. 2018: Experimental investigation of mechanical response and fracture failure behavior of wire rope with different given surface wear. Tribology International 119: 208-221
Subha, S.; Singh, D.; Venkatanarayanan, P.S.; Kavitha, N. 2018: Experimental investigation of mechanical, thermal, and ablation performance of Zr O 2 /Si C modified C‐Ph composites. International Journal of Applied Ceramic Technology 16(2): 761-771
She, J.; Zhang, H.; Han, K.; Feng, Y.; Kang, Y.; Zhong, Y. 2020: Experimental investigation of mechanisms influencing friction coefficient between lost circulation materials and shale rocks. Powder Technology 364: 13-26
Duchaine, P.; Zimmer, L.; Schuller, T. 2009: Experimental investigation of mechanisms of sound production by partially premixed flames. Proceedings of the Combustion Institute 32(1): 1027-1034
Bizjan, B.; Peternelj, M.; Širok, B. 2015: Experimental investigation of melt fiberization from a perforated rotor spinning machine. Chemical Engineering Research and Design 104: 626-637
Furumoto, T.; Egashira, K.; Munekage, K.; Abe, S. 2018: Experimental investigation of melt pool behaviour during selective laser melting by high speed imaging. CIRP Annals 67(1): 253-256
Xu, C.; Mao, Y. 2016: Experimental investigation of metal foam for controlling centrifugal fan noise. Applied Acoustics 104: 182-192
Rezk, A.; Al-Dadah, R.; Mahmoud, S.; Elsayed, A. 2012: Experimental investigation of metal organic frameworks characteristics for water adsorption chillers. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 227(5): 992-1005
Aminalragia Giamini, S.; Marquez-Velasco, J.; Sakellis, I.; Tsipas, P.; Kelaidis, N.; Tsoutsou, D.; Boukos, N.; Kantarelou, V.; Xenogiannopoulou, E.; Speliotis, T.; Aretouli, K.; Kordas, G.; Dimoulas, A. 2016: Experimental investigation of metallic thin film modification of nickel substrates for chemical vapor deposition growth of single layer graphene at low temperature. Applied Surface Science 385: 554-561
Wang, L.; Ma, H.; Shen, Z.; Xue, B.; Cheng, Y.; Fan, Z. 2017: Experimental investigation of methane-oxygen detonation propagation in tubes. Applied Thermal Engineering 123: 1300-1307
Xu, H.; Wang, X.; Li, Y.; Zhu, P.; Cong, H.; Qin, W. 2017: Experimental investigation of methane/coal dust explosion under influence of obstacles and ultrafine water mist. Journal of Loss Prevention in the Process Industries 49: 929-937
Seiser, R.; Humer, S.; Seshadri, K.; Pucher, E. 2007: Experimental investigation of methanol and ethanol flames in nonuniform flows. Proceedings of the Combustion Institute 31(1): 1173-1180
Liu, Y.; Wei, Z.; Wang, M.; Zhang, J. 2017: Experimental investigation of micro wire electrochemical discharge machining by using a rotating helical tool. Journal of Manufacturing Processes 29: 265-271
Lee, C.H.; Choi, H.; Jerng, D.; Kim, D.E.; Wongwises, S.; Ahn, H.S. 2019: Experimental investigation of microbubble generation in the venturi nozzle. International Journal of Heat and Mass Transfer 136: 1127-1138
Kantzioura, A.; Kosmopoulos, P.; Dimoudi, A.; Zoras, S. 2015: Experimental investigation of microclimatic conditions in relation to the built environment in a central urban area in Thessaloniki (Northern Greece): a case study. Sustainable Cities and Society 19: 331-340
Pashaia, B.; Sankaranarayanan, R.; Dhali, S. 1999: Experimental investigation of microdischarges in a dielectric-barrier discharge. IEEE Transactions on Plasma Science 27(1): 22-23
Luo, Y.; Liu, G.; Zou, L.; Yang, Y.; Wang, X. 2013: Experimental investigation of microheat pipes for high‐power light‐emitting diode modules. Micro-Nano Letters 8(10): 646-649
Xia, G.; Mao, G.; Sadeqhi, N. 2009: Experimental investigation of microhollow cathode discharge for the application to microplasma thrusters. Tsinghua Science and Technology 14(S 2): 49-53
Chen, D.; Zhang, H.; Jiang, H.; Cui, J. 2011: Experimental investigation of microsegregation in low frequency electromagnetic casting 7075 aluminum alloy. Materialwissenschaft und Werkstofftechnik 42(6): 500-505
Nguyen, C.D.; Benahmed, N.; Andò, E.; Sibille, L.; Philippe, P. 2019: Experimental investigation of microstructural changes in soils eroded by suffusion using X-ray tomography. Acta Geotechnica 14(3): 749-765
Chennaiah, M.B.; Kumar, P.N.; Rao, K.P. 2020: Experimental investigation of microstructure and mechanical properties of IS2602-EN31 MIG welded joint. Materials Today: Proceedings 27: 2896-2900
Fouathiya, A.; Meziani, S.; Sahli, M.; Barrière, T. 2021: Experimental investigation of microtextured cutting tool performance in titanium alloy via turning. Journal of Manufacturing Processes 69: 33-46
Mankour, A.; Smahat, A.; Guy, R.; Wang, R.; Khatir, M. 2021: Experimental investigation of microvibrations induced by reaction wheels on earth observation satellite. Advances in Space Research 68(11): 4484-4495
Huang, W.; Tsai, T.; Lin, Y.; Kuo, C.; Yu, Z.; Ho, C.; Hsu, W.; Young, H. 2020: Experimental investigation of mid-spatial frequency surface textures on fused silica after computer numerical control bonnet polishing. International Journal of Advanced Manufacturing Technology 108(5-6): 1367-1380
Stumper, U. 1991: Experimental investigation of millimeter wave six-port reflectometers incorporationg simple waveguide coupling structures. IEEE Transactions on Instrumentation and Measurement 40(2): 469-472
Rydberg, A.; Kollberg, E. 1988: Experimental investigation of millimeter-wave Ga as ted oscillators cooled to cryogenic temperatures. Microwave and Optical Technology Letters 1(1): 10-13
Kishore, M.; Amrita, M.; Kamesh, B. 2021: Experimental investigation of milling on basalt-jute hybrid composites with graphene as nanofiller. Materials Today: Proceedings 43: 726-730
Maurya, A.; Eatherton, M.R.; Matsui, R.; Florig, S.H. 2016: Experimental investigation of miniature buckling restrained braces for use as structural fuses. Journal of Constructional Steel Research 127: 54-65
Golkari, A.; Riazi, M. 2016: Experimental investigation of miscibility conditions of dead and live asphaltenic crude oil–CO2 systems. Journal of Petroleum Exploration and Production Technology 7(2): 597-609
Manay, E. 2018: Experimental investigation of mixed convection heat transfer of ferrite-based nanofluids in multiple microchannels. Heat and Mass Transfer 55(2): 533-546
Manay, E.; Mandev, E. 2018: Experimental investigation of mixed convection heat transfer of nanofluids in a circular microchannel with different inclination angles. Journal of Thermal Analysis and Calorimetry 135(2): 887-900
; Khan, R. 2021: Experimental investigation of mixed mode fracture toughness of glass fiber/epoxy laminates with sea water absorption. Polymer Composites 42(6): 2808-2816
Saleh, F.K.; Salehi, S.; Teodoriu, C. 2019: Experimental investigation of mixing energy of well cements: the gap between laboratory and field mixing. Journal of Natural Gas Science and Engineering 63: 47-57
Hosseinalipour, S.M.; Tohidi, A.; Mashaei, P.R.; Mujumdar, A.S. 2014: Experimental investigation of mixing in a novel continuous chaotic mixer. Korean Journal of Chemical Engineering 31(10): 1757-1765
Yu, F.; Su, L. 2021: Experimental investigation of mobility and deposition characteristics of dry granular flow. Landslides 18(5): 1875-1887
Abramovich, A.; Pinhasi, Y.; Arbel, M.; Gilutin, L.; Kleinman, H.; Eichenbaum, A.; Yakover, Y.; Gover, A. 1998: Experimental investigation of mode build-up and mode competition process in a prebunched free-electron maser oscillator. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment 407(1-3): 87-94
Su, C.; Wu, Q.; Weng, L.; Chang, X. 2019: Experimental investigation of mode i fracture features of steel fiber-reinforced reactive powder concrete using semi-circular bend test. Engineering Fracture Mechanics 209: 187-199
Nalinashini, G.; Tamilselvi, V. 2021: Experimental investigation of modified in-wheel switched reluctance motor with reduced torque ripple for electric vehicles. Electrical Engineering 103(6): 2837-2845
Klepka, A.; Dziedziech, K.; Mrówka, J.; Górski, J. 2019: Experimental investigation of modulation effects for contact-type interfaces in vibro-acoustic modulation tests. Structural Health Monitoring 20(3): 917-930
Yang, K.; Lin, K.; Tu, C.; He, Y.; Wang, C. 2017: Experimental investigation of moist air condensation on hydrophilic, hydrophobic, superhydrophilic, and hybrid hydrophobic-hydrophilic surfaces. International Journal of Heat and Mass Transfer 115: 1032-1041
Collet, F.; Pretot, S. 2012: Experimental investigation of moisture buffering capacity of sprayed hemp concrete. Construction and Building Materials 36: 58-65
Zhao, J.; Meissener, F. 2017: Experimental investigation of moisture properties of historic building material with hydrophobization treatment. Energy Procedia 132: 261-266
Visintin, P.; Mohamad Ali, M.; Xie, T.; Sturm, A. 2018: Experimental investigation of moment redistribution in ultra-high performance fibre reinforced concrete beams. Construction and Building Materials 166: 433-444
Tang, J.; Ren, B.; Wang, G.; Zhu, G. 2018: Experimental investigation of monochromatic wave transformation characteristics over the coral reefs. Chinese Science Bulletin 63(5-6): 590-600
Fíla, J.; Eliášová, M.; Sokol, Z. 2018: Experimental investigation of mortar mechanical properties for glass brick masonry. Glass Structures-Engineering 4(1): 127-141
Go, S.; Lee, H.; Lee, J.; Kim, J.; Chung, C. 2009: Experimental investigation of mortars using activated Hwangtoh. Construction and Building Materials 23(3): 1438-1445
Zuo, W.; Wang, Y. 2015: Experimental investigation of motion responses of tunnel element immerging by moored barge. Journal of Hydrodynamics 27(6): 857-864
He, J.; Liu, Y.; Chen, A.; Dai, L. 2012: Experimental investigation of movable hybrid GFRP and concrete bridge deck. Construction and Building Materials 26(1): 49-64
Padolkar, A.; Waghmare, A.; Tekale, P.; Panchal, R.; Patunkar, P.; , 2016: Experimental investigation of multi cylinder S.I. Engine emissions by using oxygen enriched air. International Journal of Advanced Research 4(5): 100-106
Ma, H.; Wu, X.; Wang, D.; Chen, J.; Feng, F. 2013: Experimental investigation of multi-cycle pulse detonation engine at different air inlet systems. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering 228(12): 2207-2214
Datta, N.; Chakraborty, A.; Ali, S.M.; Choo, F. 2017: Experimental investigation of multi-effect regenerator for desiccant dehumidifier: Effects of various regeneration temperatures and solution flow rates on system performances. International Journal of Refrigeration 76: 7-18
Cupać, J.; Martens, K.; Nussbaumer, A.; Belis, J.; Louter, C. 2017: Experimental investigation of multi-span post-tensioned glass beams. Glass Structures-Engineering 2(1): 3-15
Zheng, J.; Pan, R.; Li, C.; Zhang, W.; Lin, J.; Davies, C.M. 2018: Experimental investigation of multi-step stress-relaxation-ageing of 7050 aluminium alloy for different pre-strained conditions. Materials Science and Engineering: A710: 111-120
Yazdanfar, A.; Shahrajabian, H. 2021: Experimental investigation of multi-wall carbon nanotube added epoxy resin on the EDM performance of epoxy/carbon fiber/MWCNT hybrid composites. International Journal of Advanced Manufacturing Technology 116(5-6): 1801-1817
Potapczuk, M.G.; Berkowitz, B.M. 1990: Experimental investigation of multielement airfoil ice accretion andresulting performance degradation. Journal of Aircraft 27(8): 679-691
Wang, C.; Wong, D.; Chien, I.; Shih, R.; Wang, S.; Tsai, C. 1997: Experimental investigation of multiple steady states and parametric sensitivity in azeotropic distillation. Computers-Chemical Engineering 21: S535-S540
Joybari, M.M.; Seddegh, S.; Wang, X.; Haghighat, F. 2019: Experimental investigation of multiple tube heat transfer enhancement in a vertical cylindrical latent heat thermal energy storage system. Renewable Energy 140: 234-244
Farzanehnia, A.; Khatibi, M.; Sardarabadi, M.; Passandideh-Fard, M. 2019: Experimental investigation of multiwall carbon nanotube/paraffin based heat sink for electronic device thermal management. Energy Conversion and Management 179: 314-325
Zou, W.; Chen, D.; Peng, W.; Zeng, Y. 2016: Experimental investigation of multi‐path and metal‐stacking structure for 8‐shape on‐chip inductors on standard CMOS. Electronics Letters 52(24): 1998-1999
Ackerbauer, P.; Werner, J.; Breunlich, W.; Cargnelli, M.; Fussy, S.; Jeitler, M.; Kammel, P.; Marton, J.; Scrinzi, A.; Zmeskal, J.; Bistirlich, J.; Crowe, K.; Kurck, J.; Petitjean, C.; Sherman, R.; Bossy, H.; Daniel, H.; Hartmann, F.; Neumann, W.; Schmidt, G.; Faifman, M. 1999: Experimental investigation of muon-catalyzed dt fusion at cryogenic temperatures. Nuclear Physics A 652(4): 311-338
Nägele, N.; Breunlich, W.; Cargnelli, M.; Fuhrmann, H.; Kammel, P.; Marton, J.; Pawlek, P.; Scrinzi, A.; Werner, J.; Zmeskal, J.; Bertl, W.; Petitjean, C. 1989: Experimental investigation of muon-induced fusion in liquid deuterium. Nuclear Physics A 493(3-4): 397-411
Şahin, Z.; Durgun, O.; Aksu, O.N. 2015: Experimental investigation of n-butanol/diesel fuel blends and n-butanol fumigation – Evaluation of engine performance, exhaust emissions, heat release and flammability analysis. Energy Conversion and Management 103: 778-789
Ali, H.M.; Arshad, A. 2017: Experimental investigation of n-eicosane based circular pin-fin heat sinks for passive cooling of electronic devices. International Journal of Heat and Mass Transfer 112: 649-661
Senthur, N.; Karthikeyen, R.; BalaMurugan, S.; Divakara, S.; Esakkiraja, M. 2020: Experimental investigation of nano metal oxide blended Eucalyptus bio fuel on common rail direct injected diesel engine. Materials Today: Proceedings 33: 2605-2610
Poddar, R.; Sahu, A.K.; Jha, S. 2021: Experimental investigation of nano second fiber laser micro grooving on cylindrical surface. Materials Today: Proceedings 44: 2005-2012
Pourpasha, H.; Zeinali Heris, S.; Asadi, A. 2019: Experimental investigation of nano-Ti O2/turbine meter oil nanofluid. Journal of Thermal Analysis and Calorimetry 138(1): 57-67
Moradi, R.; Karimi-Sabet, J.; Shariaty-niassar, M.; Amini, Y. 2016: Experimental investigation of nanofibrous poly(vinylidene fluoride) membranes for desalination through air gap membrane distillation process. Korean Journal of Chemical Engineering 33(10): 2953-2960
Parizad Laein, R.; Rashidi, S.; Abolfazli Esfahani, J. 2016: Experimental investigation of nanofluid free convection over the vertical and horizontal flat plates with uniform heat flux by PIV. Advanced Powder Technology 27(2): 312-322
Akbari, A.; Saidi, M.H. 2018: Experimental investigation of nanofluid stability on thermal performance and flow regimes in pulsating heat pipe. Journal of Thermal Analysis and Calorimetry 135(3): 1835-1847
Kumar, R.; Verma, S.K.; Singh, M. 2021: Experimental investigation of nanomaterial doped in black paint coating on absorber for energy conversion applications. Materials Today: Proceedings 44: 961-967
Mohanty, B.; Katti, K.S.; Katti, D.R. 2008: Experimental investigation of nanomechanics of the mineral-protein interface in nacre. Mechanics Research Communications 35(1-2): 17-23
Dinesh, S.; Elanchezhian, C.; Vijayaramnath, B.; Sathiyanarayanan, K.; SyedAfiridi, S. 2020: Experimental investigation of natural and synthetic hybrid composite for marine application. Materials Today: Proceedings 22: 322-329
Zhu, H.; Yang, X.; Tu, J.; Jiang, S. 2013: Experimental investigation of natural circulation in a symmetrical loop under large scale rolling motion conditions. Journal of Nuclear Science and Technology 50(8): 844-855
Moldovan, S.I.; Balasoiu, A.M.; Braun, M. 2019: Experimental investigation of natural convection flow in a laterally heated vertical cylindrical enclosure. International Journal of Heat and Mass Transfer 139: 205-212
Ilyas, S.U.; Pendyala, R.; Narahari, M. 2018: Experimental investigation of natural convection heat transfer characteristics in MWCNT-thermal oil nanofluid. Journal of Thermal Analysis and Calorimetry 135(2): 1197-1209
Bilawane, R.; Mandavgade, N.K.; Kalbande, V.N.; Patle, L.J.; Kanojiya, M.; Khorgade, R.D. 2021: Experimental investigation of natural convection heat transfer coefficient for roughed inclined plate. Materials Today: Proceedings 46: 7926-7931
Pierre, C.S.; Tien, C. 1963: Experimental investigation of natural convection heat transfer in confined space for non-Newtonian fluid. The Canadian Journal of Chemical Engineering 41(3): 122-127
Torki, M.; Etesami, N. 2019: Experimental investigation of natural convection heat transfer of Si O2/water nanofluid inside inclined enclosure. Journal of Thermal Analysis and Calorimetry 139(2): 1565-1574
Long, Z.; Zhang, P.; Shen, B.; Li, T. 2015: Experimental investigation of natural convection in a supercritical binary fluid. International Journal of Heat and Mass Transfer 90: 922-930
Abidi-Saad, A.; Polidori, G.; Kadja, M.; Beaumont, F.; Popa, C.; Korichi, A. 2016: Experimental investigation of natural convection in a vertical rib-roughened channel with asymmetric heating. Mechanics Research Communications 76: 1-10
Brucks, A.; Sitte, B. 2004: Experimental investigation of natural convection in rotating and non rotating wide spherical annuli. PAMM 4(1): 478-479
Tasaka, Y.; Kudoh, Y.; Takeda, Y.; Yanagisawa, T. 2005: Experimental investigation of natural convection induced by internal heat generation. Journal of Physics: Conference Series 14: 168-179
Brucks, A. 2007: Experimental investigation of natural convective flows in slowly rotating wide spherical shells. Archive of Applied Mechanics 78(1): 33-47
Cao, W.; Gao, D.; Ng, H.D.; Lee, J.H. 2019: Experimental investigation of near-limit gaseous detonations in small diameter spiral tubing. Proceedings of the Combustion Institute 37(3): 3555-3563
Reimerdes, H.; Canal, G.; Duval, B.; Labit, B.; Lunt, T.; Nespoli, F.; Vijvers, W.; De Temmerman, G.; Lowry, C.; Morgan, T.; Tal, B.; Wischmeier, M. 2015: Experimental investigation of neon seeding in the snowflake configuration in TCV. Journal of Nuclear Materials 463: 1196-1199
Seçgin, .; Özsert, . 2018: Experimental investigation of new blank holder approach for incremental forming method. International Journal of Advanced Manufacturing Technology 101(1-4): 357-365
Qin, Y.; Chen, Z.; Wang, X. 2014: Experimental investigation of new internal-diaphragm connections to CFT columns under cyclic loading. Journal of Constructional Steel Research 98: 35-44
Calaon, M.; Islam, A.; Hansen, H.N.; Ravn, C. 2011: Experimental investigation of new manufacturing process chains to create micro-metal structures on polymer substrates for lab-on-chip sensors. International Journal of Advanced Manufacturing Technology 59(1-4): 101-109
Deng, Y.; Li, Y.; Li, L. 2018: Experimental investigation of nitrogen isotopic effects associated with ammonia degassing at 0–70 °C. Geochimica et Cosmochimica Acta 226: 182-191
Jensen, L.S.; Jannerup, H.E.; Glarborg, P.; Jensen, A.; Dam-Johansen, K. 2000: Experimental investigation of no from pulverized char combustion. Proceedings of the Combustion Institute 28(2): 2271-2278
Choi, W.; Choi, Y.; Hong, S.; Song, J.; KwonSong, H.; Seol, H. 2017: Experimental investigation of noise generated by submerged circular cylinder. Noise Control Engineering Journal 65(4): 288-294
Naji, A W.; Abidin, M S Z.; Al-Mansoori, M H.; Faidz, A R.; Mahdi, M A. 2007: Experimental investigation of noise in double-pass erbium-doped fiber amplifiers. Laser Physics Letters 4(2): 145-148
Jegadeesan, V.; Sujith, R. 2013: Experimental investigation of noise induced triggering in thermoacoustic systems. Proceedings of the Combustion Institute 34(2): 3175-3183
Patterson, G.; Goya, A.; Fierens, P.; Ibáñez, S.; Grosz, D. 2010: Experimental investigation of noise-assisted information transmission and storage via stochastic resonance. Physica A: Statistical Mechanics and its Applications 389(9): 1965-1970
Yadav, L.; Lal, S.; Singh, N.K. 2021: Experimental investigation of non-edible dielectric fluid (bio-dielectric) in electrical discharge machining process. Materials Today: Proceedings 46: 10125-10137
Kayhan, E.; Kaftanoglu, B. 2018: Experimental investigation of non-isothermal deep drawing of DP600 steel. International Journal of Advanced Manufacturing Technology 99(1-4): 695-706
Gao, M.; Wang, Y.; Wang, Y.; Wang, P. 2018: Experimental investigation of non-linear multi-stable electromagnetic-induction energy harvesting mechanism by magnetic levitation oscillation. Applied Energy 220: 856-875
McGuirt, C.W.; Lianis, G. 1969: Experimental investigation of non-linear, non-isothermal viscoelasticity. International Journal of Engineering Science 7(6): 579-599
Camassa, R.; Hurley, M.W.; McLaughlin, R.M.; Passaggia, P.; Thomson, C.F.C. 2018: Experimental investigation of nonlinear internal waves in deep water with miscible fluids. Journal of Ocean Engineering and Marine Energy 4(4): 243-257
Starykh, D.; Shikhaliev, I.; Konyshev, V.; Nanii, O.; Treshchikov, V.; Ubaydullaev, R.; Kharasov, D. 2018: Experimental investigation of nonlinear operation mode of a DP-QPSK 100G link with co-propagating-pump Raman amplification. Quantum Electronics 48(8): 767-772
Ivanov, V.V.; Klopovskii, K.S.; Lopaev, D.V.; Muratov, E.A.; Rakhimov, A.T.; Rakhimova, T.V. 1996: Experimental investigation of nonlocality effects in the electron energy spectrum in an electronegative gas. Journal of Experimental and Theoretical Physics Letters 63(7): 537-542
Xie, W.; Zhang, W.; Kuang, N.; Li, D.; Huang, W.; Gao, Y.; Ye, N.; Guo, L.; Ren, P. 2016: Experimental investigation of normal and oblique impacts on CFRPs by high velocity steel sphere. Composites Part B: Engineering 99: 483-493
Belgacem, L.; Ouinas, D.; Viña Olay, J.A.; Amado, A.A. 2018: Experimental investigation of notch effect and ply number on mechanical behavior of interply hybrid laminates (glass/carbon/epoxy). Composites Part B: Engineering 145: 189-196
Ooi, B.L.; Leong, M.S.; Yu, K.Y.; Wang, Y.; Chen, B. 2004: Experimental investigation of novel multifingered antenna. Microwave and Optical Technology Letters 42(3): 206-208
Kshirsagar, J.M.; Shrivastava, R. 2018: Experimental investigation of nucleate pool boiling characteristics of high concentrated alumina/water nanofluids. Heat and Mass Transfer 54(6): 1779-1790
Ali, H.M.; Generous, M.M.; Ahmad, F.; Irfan, M. 2017: Experimental investigation of nucleate pool boiling heat transfer enhancement of Ti O2-water based nanofluids. Applied Thermal Engineering 113: 1146-1151
Bouraiou, A.; Hamouda, M.; Chaker, A.; Neçaibia, A.; Mostefaoui, M.; Boutasseta, N.; Ziane, A.; Dabou, R.; Sahouane, N.; Lachtar, S. 2018: Experimental investigation of observed defects in crystalline silicon PV modules under outdoor hot dry climatic conditions in Algeria. Solar Energy 159: 475-487
Abbasi Monfared, M.; Sheikhi, M.; Kasiri, N.; Mohammadi, T. 2018: Experimental investigation of oil-in-water microfiltration assisted by Dielectrophoresis: Operational condition optimization. Chemical Engineering Research and Design 137: 421-433
Colak, O.U.; Uzunsoy, D.; Bahlouli, N.; Francart, C. 2020: Experimental investigation of oligo cyclic compression behavior of pure epoxy and graphene-epoxy nanocomposites. Polymer Bulletin 78(12): 6935-6952
Gaitan, D.F.; Holt, R.G. 1995: Experimental investigation of onset threshold for shape oscillations for air bubbles in 1g. Journal of the Acoustical Society of America 98(5): 2980-2981
Abdul Rasheed, R.K.; Chan, S.H. 2015: Experimental investigation of open circuit voltage during start-up process of HT-PEMFC. Electrochimica Acta 186: 353-358
Liu, C.; Wu, Y.; Zhu, Y.; Li, D.; Ma, L. 2018: Experimental investigation of optical and thermal performance of a PCM-glazed unit for building applications. Energy and Buildings 158: 794-800
Ahmadi, P.; Behinaein, G.; Timmons, B P.; Summy, G S. 2006: Experimental investigation of optical atom traps with a frequency jump. Journal of Physics B: Atomic, Molecular and Optical Physics 39(5): 1159-1168
Tanaka, Y.; Ogata, M.; Nagashima, K.; Agawa, H.; Matsuura, S.; Kumagai, Y. 2010: Experimental investigation of optical fiber temperature sensors at cryogenic temperature and in high magnetic fields. Physica C: Superconductivity and its Applications 470(20): 1890-1894
Bindhu, C.; Harilal, S.; Nampoori, V.; Vallabhan, C. 2000: Experimental investigation of optical limiting and thermal lensing in toluene solutions of C 70. Applied Physics B: Lasers and Optics 70(3): 429-434
Qi, H.; Zhang, Y.; Wang, Q.; Wang, F.; Hussein, A.K.; Arıcı, M.; Li, D. 2019: Experimental investigation of optical properties of oily sewage with different p H environment. Optik 183: 338-345
Kang, T.; Choi, D.; Choi, W.; Choi, Y.; Kim, S.; Choi, W. 2007: Experimental investigation of optical thyristor operating as optical hard-limiter. Microwave and Optical Technology Letters 49(11): 2779-2780
Kaushal, H.; Kaddoum, G.; Jain, V.; Kar, S. 2017: Experimental investigation of optimum beam size for FSO uplink. Optics Communications 400: 106-114
Kanojia, N.; Kaushik, S.; Panwar, K.; Kshetri, R.; Uniyal, V.; Singh, M. 2021: Experimental investigation of optimum charging and discharging time on packed bed heat regenerator for space heating and solar drying application. Materials Today: Proceedings 46: 6712-6718
Springfield, J.F.; Raney, J.P. 1962: Experimental investigation of optimum end supports for a vibrating beam. Experimental Mechanics 2(12): 366-372
Stein, T.; Kauppila, W.; Miller, E.; Surdutovich, E. 2004: Experimental investigation of ortho-positronium–surface interactions. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms 221: 134-139
Davari, H.; Goshayeshi, H.R.; Öztop, H.F.; Chaer, I. 2019: Experimental investigation of oscillating heat pipe efficiency for a novel condenser by using Fe3O4 nanofluid. Journal of Thermal Analysis and Calorimetry 140(6): 2605-2614
Taft, B.S.; Rhodes, M. 2017: Experimental investigation of oscillating heat pipes under direct current and pulse width modulation heating input conditions. Applied Thermal Engineering 126: 1018-1022
Kumar, R.; Kumar, A.; Singh, R.; Thomas, J. 2011: Experimental investigation of oscillatory structures in laser-blow-off plasma plume. Physics Letters A 375(20): 2064-2070
Wang, H.; Zhang, J.; Li, Y.; Wang, Z.; Wu, J. 2020: Experimental investigation of overload effects on fatigue crack growth behaviour of 7050‐T7451 aluminium alloy. Fatigue-Fracture of Engineering Materials-Structures 43(12): 2928-2942
Helfenstein, J.; Hollenstein, M.; Papes, O.; Mazza, E. 2009: Experimental investigation of ovine intervertebral disc units in longitudinal loading. PAMM 9(1): 79-82
Vishakantaiah, J.; Balasubramaniam, G. 2018: Experimental investigation of oxidation resistance of Si C powder for the protection of re-entry space vehicle using material shock tube . Advanced Materials Letters 9(7): 510-515
Singh, P.; Mahanta, P.; Kalita, P. 2021: Experimental investigation of paddy drying characteristics in a slitless rotary fluidized-bed dryer. Drying Technology: 1-11
Gislason Jr., T. 1971: Experimental investigation of panel divergence at subsonic speeds. AIAA Journal 9(11): 2252-2258
Jahanbakhti, E.; Fanaie, N.; Rezaeian, A. 2017: Experimental investigation of panel zone in rigid beam to box column connection. Journal of Constructional Steel Research 137: 180-191
Kumar, V.; Yadav, A. 2021: Experimental investigation of parabolic dish concentrator with various sizes of receiver. Materials Today: Proceedings 44: 4966-4971
Chafie, M.; Ben Aissa, M.F.; Bouadila, S.; Balghouthi, M.; Farhat, A.; Guizani, A. 2016: Experimental investigation of parabolic trough collector system under Tunisian climate: Design, manufacturing and performance assessment. Applied Thermal Engineering 101: 273-283
Heydarian, R.; Shafii, M.B.; Rezaee Shirin-Abadi, A.; Ghasempour, R.; Alhuyi Nazari, M. 2019: Experimental investigation of paraffin nano-encapsulated phase change material on heat transfer enhancement of pulsating heat pipe. Journal of Thermal Analysis and Calorimetry 137(5): 1603-1613
Lei, M.; Yao, B.; Chen, Y.; Han, Y.; Wang, Y.; Menke, N.; Zheng, Y.; Wang, C.; Fan, M.; Chen, G. 2003: Experimental investigation of parallel optical data storage using pyrrylfulgide photochromic material. Chinese Science Bulletin 48(15): 1548-1550
Kanthale, V.; Jaybhaye, M.; Dhokane, N.; Barve, S. 2021: Experimental investigation of parameters and surface integrity of die steel based on MR fluid finishing process. Materials Today: Proceedings 47: 5632-5639
Dadkhah, M.; Hojjat, Y.; Modabberifar, M.; Higuchi, T. 2008: Experimental investigation of parameters influencing electrostatic motor's performance with air bearing operation. International Journal of Advanced Manufacturing Technology 43(3-4): 211-216
Rumpf, K.; Naumann, M.; Jossen, A. 2017: Experimental investigation of parametric cell-to-cell variation and correlation based on 1100 commercial lithium-ion cells. Journal of Energy Storage 14: 224-243
Yadav, U.S.; Kumar, H.; Mahto, V. 2020: Experimental investigation of partially hydrolyzed polyacrylamide–hexamine–pyrocatechol polymer gel for permeability modification. Journal of Sol-Gel Science and Technology 94(2): 335-346
Zhang, K.; Moshammer, K.; Oβwald, P.; Kohse-Höinghaus, K. 2013: Experimental investigation of partially premixed, highly-diluted dimethyl ether flames at low temperatures. Proceedings of the Combustion Institute 34(1): 763-770
Watanabe, Y.; Shiratani, M. 1994: Experimental investigation of particulate formation in He-Si H4modulated RF discharges. Plasma Sources Science and Technology 3(3): 286-291
Sakraker, I.; Asma, C.O. 2013: Experimental investigation of passive/active oxidation behavior of Si C based ceramic thermal protection materials exposed to high enthalpy plasma. Journal of the European Ceramic Society 33(2): 351-359
Weng, X.; Zhu, H.; Chen, J.; Liang, D.; Shi, B.; Zhang, C. 2014: Experimental investigation of pavement behavior after embankment widening using a fiber optic sensor network. Structural Health Monitoring 14(1): 46-56
Yu, J.S.; Emes, M.J.; Ghanadi, F.; Arjomandi, M.; Kelso, R. 2019: Experimental investigation of peak wind loads on tandem operating heliostats within an atmospheric boundary layer. Solar Energy 183: 248-259
Dronov, O.I.; Kovalska, I.O.; Nastashenko, I.L.; Kondratiuk, T.O.; Levchenko, L.V. 2021: Experimental investigation of peculiarities for impact of a sorption action preparation silicon dioxide on infectious agents of cholangitis. Klinicheskaia khirurgiia 88(3-4): 80-86
Wang, C.; Ma, T.; Ning, J. 2008: Experimental investigation of penetration performance of shaped charge into concrete targets. Acta Mechanica Sinica 24(3): 345-349
Jindal, M.; Rosha, P.; Mahla, S.K.; Dhir, A. 2015: Experimental investigation of performance and emissions characteristics of waste cooking oil biodiesel and n-butanol blends in a compression ignition engine. RSC Advances 5(43): 33863-33868
Dahake, M.; Malkhede, D. 2021: Experimental investigation of performance and emissions of CRdi diesel engine in dual fuel mode by hydrogen induction and diesel injection coupled with exhaust gas recirculation. Materials Today: Proceedings 46: 2814-2819
Albayrak Ceper, B.; Yıldız, M. 2017: Experimental investigation of performance and emissions of the SICAI-hybrid engine systems. International Journal of Hydrogen Energy 42(40): 25791-25800
Cho, H.; Park, C. 2016: Experimental investigation of performance and exergy analysis of automotive air conditioning systems using refrigerant R1234yf at various compressor speeds. Applied Thermal Engineering 101: 30-37
Udhayakumar, K.; Sakthivel, P.; Suresh, V.; Kavin, K.; Paramadhayalan, P. 2021: Experimental investigation of performance of single cylinder di diesel engine fueled with diesel and Kapok seed oil. Materials Today: Proceedings 46: 3739-3742
Yao, X.; Xu, K.; Li, Y. 2017: Experimental investigation of performance properties and agglomeration behavior of fly ash from gasification of corncobs. Journal of Central South University 24(3): 496-505
Upadrashta, D.; Yang, Y. 2016: Experimental investigation of performance reliability of macro fiber composite for piezoelectric energy harvesting applications. Sensors and Actuators A: Physical 244: 223-232
Jamuwa, D.; Sharma, D.; Soni, S. 2016: Experimental investigation of performance, exhaust emission and combustion parameters of stationary compression ignition engine using ethanol fumigation in dual fuel mode. Energy Conversion and Management 115: 221-231
Khot, S.M.; Yelve, N.P.; Kumar, P.; Purohit, G.A.; Singh, D. 2019: Experimental investigation of performances of different optimal controllers in active vibration control of a cantilever beam. ISSS Journal of Micro and Smart Systems 8(2): 101-111
Karagoz, I. 1993: Experimental investigation of periodic flow in branching pipes. Flow Measurement and Instrumentation 4(3): 163-169
Brzeski, P.; Virgin, L.N. 2017: Experimental investigation of perpetual points in mechanical systems. Nonlinear Dynamics 90(4): 2917-2928
Kousha, N.; Rahimi, M.; Pakrouh, R.; Bahrampoury, R. 2019: Experimental investigation of phase change in a multitube heat exchanger. Journal of Energy Storage 23: 292-304
Kamkari, B.; Shokouhmand, H. 2014: Experimental investigation of phase change material melting in rectangular enclosures with horizontal partial fins. International Journal of Heat and Mass Transfer 78: 839-851
Nofal, M.; Al-Hallaj, S.; Pan, Y. 2019: Experimental investigation of phase change materials fabricated using selective laser sintering additive manufacturing. Journal of Manufacturing Processes 44: 91-101
Ruan, J.; Wang, C.; Zhao, C.; Yang, S.; Yang, T.; Liu, X. 2014: Experimental investigation of phase equilibria and microstructure in the Co–Ti–V ternary system. Intermetallics 49: 121-131
Xie, Z.; Lv, K.; Liu, H.; Cai, G.; Jin, Z. 2015: Experimental investigation of phase equilibria in Cu–Ge–Ti system. Journal of Alloys and Compounds 651: 590-597
Xie, Z.; Lv, K.; Luo, Y.; Liu, H.; Jin, Z. 2015: Experimental investigation of phase equilibria in Ge–Ni–Ti system. Journal of Alloys and Compounds 645: 344-351
He, J.Q.; Fan, L.; Liu, H.S.; Peng, H.L.; Jin, Z.P. 2019: Experimental investigation of phase equilibria in the Al–Ni–Sc system. Journal of Materials Science 54(14): 10516-10528
Mardani, M.; Fartushna, I.; Khvan, A.; Cheverikin, V.; Dinsdale, A. 2019: Experimental investigation of phase equilibria in the Ce-Fe-Ni system. Journal of Alloys and Compounds 781: 524-540
Fartushna, I.; Mardani, M.; Khvan, A.; Cheverikin, V.; Gorshenkov, M.; Dinsdale, A. 2019: Experimental investigation of phase equilibria in the Ce-Fe-Ni system at 950 and 750 °C. Calphad 64: 284-291
Zhu, L.; Wei, C.; Qi, H.; Jiang, L.; Jin, Z.; Zhao, J. 2017: Experimental investigation of phase equilibria in the Co-rich part of the Co-Al-X (X = W, Mo, Nb, Ni, Ta) ternary systems using diffusion multiples. Journal of Alloys and Compounds 691: 110-118
Lu, X.; Cheng, K.; Liu, S.; Li, K.; Zheng, F.; Du, Y. 2015: Experimental investigation of phase equilibria in the Co–Hf system. Journal of Alloys and Compounds 627: 251-260
Liu, X.; Zhang, X.; Yang, S.; Zhao, C.; Wang, C. 2012: Experimental investigation of phase equilibria in the Co–W–Nb ternary system. Intermetallics 31: 48-54
Sun, Y.; Zeng, W.; Zhong, Y.; Wang, M.; Liu, H.; Cai, G.; Jin, Z. 2017: Experimental investigation of phase equilibria in the Cr-Ge-Ti system. Thermochimica Acta 652: 24-33
Wang, C.; Deng, X.; Yu, W.; Yu, Y.; Liu, X. 2012: Experimental investigation of phase equilibria in the Ni–Co–Si ternary system. Intermetallics 22: 129-135
Yang, S.; Zhang, J.; Wang, C.; Yu, W.; Shi, Z.; Liu, X. 2016: Experimental investigation of phase equilibria in the Ni–Fe–Zr ternary system. Journal of Materials Research 31(16): 2407-2414
Huang, X.; Hu, T.; Liu, S.; Cai, G.; He, Y.; Jin, Z. 2019: Experimental investigation of phase equilibria in the Tb-Si-Cr system. Calphad 65: 212-224
Zeng, L.; Liu, L.; Huang, S.; Zhang, L. 2017: Experimental investigation of phase equilibria in the Ti-Fe-Cr ternary system. Calphad 58: 58-69
Zeng, L.; Xu, G.; Liu, L.; Bai, W.; Zhang, L. 2018: Experimental investigation of phase equilibria in the Ti-Fe-Zr system. Calphad 61: 20-32
Wang, C.; Tu, S.; Yu, Y.; Han, J.; Liu, X. 2012: Experimental investigation of phase equilibria in the Zr–Cu–Al system. Intermetallics 31: 1-8
Wang, W.; Lu, H.; Shen, J.; Lu, X.; He, Y. 2015: Experimental investigation of phase equilibria in the Zr–Nb–Cr system at 1573 K and 1373 K. Journal of Nuclear Materials 465: 626-632
Saenko, I.; Ilatovskaia, M.; Savinykh, G.; Fabrichnaya, O. 2017: Experimental investigation of phase relations and thermodynamic properties in the Zr O2 -Ti O2 system. Journal of the American Ceramic Society 101(1): 386-399
Fabrichnaya, O.; Saenko, I.; Kriegel, M.; Seidel, J.; Zienert, T.; Savinykh, G.; Schreiber, G. 2016: Experimental investigation of phase relations and thermodynamic properties in the system Zr O 2 –Eu 2 O 3 –Al 2 O 3. Journal of the European Ceramic Society 36(6): 1455-1468
Jiang, Y.; Li, X.; Jiang, Y.; Huang, S.; Shi, X.; Mao, C.; Zhang, L.; Liu, L.; Zheng, F. 2017: Experimental investigation of phase relations in Al-Co-Y ternary system. Calphad 56: 1-9
Tan, M.; Mao, C.; Zhang, L.; Bai, W.; Liu, L. 2018: Experimental investigation of phase relations in Bi-Te-RE (Yb, La, Ce) ternary systems. Calphad 61: 62-71
Mardani, M.; Fartushna, I.; Khvan, A.; Cheverikin, V.; Dinsdale, A. 2019: Experimental investigation of phase transformations in the La-Fe and La-Fe-C systems. Calphad 65: 370-384
Wu, Y.; Zhang, Y.; Wang, Y.; Jin, Z.; Dong, S. 2013: Experimental investigation of phase transformations of olivine and enstatite at the lower part of the mantle transition zone: Implications for structure of the 660 km seismic discontinuity. Science China Earth Sciences 57(4): 592-599
Agar, O.; Tekin, H.O.; Sayyed, M.; Korkmaz, M.E.; Culfa, O.; Ertugay, C. 2019: Experimental investigation of photon attenuation behaviors for concretes including natural perlite mineral. Results in Physics 12: 237-243
Sayyed, M.I.; Akman, F.; Kaçal, M.R. 2019: Experimental investigation of photon attenuation parameters for different binary alloys. Radiochimica Acta 107(4): 339-348
Kirsebom, K.; Medenwaldt, R.; Mikkelsen, U.; Møller, S.; Paludan, K.; Uggerhøj, E.; Worm, T.; Elsener, K.; Ballestrero, S.; Sona, P.; Romano, J.; Connell, S.; Sellschop, J.; Avakian, R.; Avetisian, A.; Taroian, S. 1996: Experimental investigation of photon multiplicity and radiation cooling for 150 Ge V electrons/positrons traversing diamond and Si crystals. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms 119(1-2): 79-95
Chen, Y.; Wang, X.; Yong, Z.; Zhang, Y.; Chen, Z.; He, L.; Lee, P.; Chan, H.L.; Leung, C.W.; Wang, Y. 2012: Experimental investigation of photonic band gap in one-dimensional photonic crystals with metamaterials. Physics Letters A 376(16): 1396-1400
Zhu, D.; Wu, H.; Pan, S. 2016: Experimental investigation of photonic microwave switching based on XGM in a SOA. Optics Communications 373: 95-99
Fickenscher, T. 2007: Experimental investigation of photonic millimeter-wave, beam-splitter-type coupler in image guide technology. Microwave and Optical Technology Letters 49(10): 2526-2530
Subrahmanyam, B.; Abshalomu, Y.; Mojeswararao, D.; Devireddy, S. 2021: Experimental investigation of physical and mechanical behaviour of broom grass root and glass fiber reiforced hybrid composites. Materials Today: Proceedings 46: 3193-3197
Sargent, E.H.; Xu, J.M.; Caneau, C.; Zah, C. 1998: Experimental investigation of physical mechanisms underlying lateral current injection laser operation. Applied Physics Letters 73(3): 285-287
Wang, Z.; Dai, Q.; Guo, S.; Wang, R.; Ye, M.; Yap, Y.K. 2017: Experimental investigation of physical properties and accelerated sunlight-healing performance of flake graphite and exfoliated graphite nanoplatelet modified asphalt materials. Construction and Building Materials 134: 412-423
Hirsch, D.L.; McCormick, R.L. 1966: Experimental investigation of pilot dynamics in a pilot-induced oscillation situation. Journal of Aircraft 3(6): 567-573
Attanasio, C.; Maritato, L.; Coccorese, C.; Prichepa, S.; Lykov, A.; Salvato, M. 1995: Experimental investigation of pinning potential shape in Bi-Sr-Ca-Cu-O films. IEEE Transactions on Appiled Superconductivity 5(2): 1359-1362
Melissianos, V.E.; Lignos, X.A.; Bachas, K.K.; Gantes, C.J. 2017: Experimental investigation of pipes with flexible joints under fault rupture. Journal of Constructional Steel Research 128: 633-648
Lvovich Muzyukin, I. 2015: Experimental investigation of plasma cloud scattering initiated by an accelerated electron beam. IEEE Transactions on Plasma Science 43(10): 3744-3748
Rotman, W.; Meltz, G. 1961: Experimental investigation of plasma sheath properties of a re-entry vehicle. Planetary and Space Science 6: 224-225
Franz, P.; Marrelli, L.; Martin, P.; Pasqualotto, R.; Predebon, I.; Spizzo, G. 2002: Experimental investigation of plasma topological properties in the Reversed Field Pinch. Europhysics Letters (EPL) 59(1): 48-54
Ehrich, H.; Kelleher, D.E. 1980: Experimental investigation of plasma-broadened hydrogen Balmer lines at low electron densities. Physical Review A 21(1): 319-334
Zelasko, W.; Pawlus, P.; Dzierwa, A.; Prucnal, S. 2016: Experimental investigation of plastic contact between a rough steel surface and a flat sintered carbide surface. Tribology International 100: 141-151
Xu, Y.; Zhang, H.; Yang, F.; Tong, L.; Yan, D.; Yang, Y.; Wang, Y.; Wu, Y. 2021: Experimental investigation of pneumatic motor for transport application. Renewable Energy 179: 517-527
Hemati, S.A.; Bafghi, M.A.B.; Kheyroddin, A. 2018: Experimental investigation of pod on the behavior of all-steel buckling restrained braces. Journal of Constructional Steel Research 150: 186-194
Fu, Z.; Otsuki, T.; Motozawa, M.; Kurosawa, T.; Yu, B.; Kawaguchi, Y. 2014: Experimental investigation of polymer diffusion in the drag-reduced turbulent channel flow of inhomogeneous solution. International Journal of Heat and Mass Transfer 77: 860-873
Alfazazi, U.; AlAmeri, W.; Hashmet, M.R. 2018: Experimental investigation of polymer flooding with low-salinity preconditioning of high temperature–high-salinity carbonate reservoir. Journal of Petroleum Exploration and Production Technology 9(2): 1517-1530
Manelis, G.B.; Smirnov, L.P. 1976: Experimental investigation of polymerization processes under nonisothermal conditions. Combustion, Explosion, and Shock Waves 12(5): 597-600
Saeidi, D.; Alemrajabi, A. 2013: Experimental investigation of pool boiling heat transfer and critical heat flux of nanostructured surfaces. International Journal of Heat and Mass Transfer 60: 440-449
Katarkar, A.S.; Pingale, A.D.; Belgamwar, S.U.; Bhaumik, S. 2021: Experimental investigation of pool boiling heat transfer performance of refrigerant R-134a on differently roughened copper surfaces. Materials Today: Proceedings 47: 3269-3275
Dumont, V.; Badulescu, C.; Adrien, J.; Carrere, N.; Thévenet, D.; Maire, E. 2019: Experimental investigation of porosities evolution in a bonded assembly by means of X-ray tomography. The Journal of Adhesion 97(6): 528-552
Wang, F.; Bosque, H.D.; Hyder, J.; Corliss, M.; Hung, W.N. 2020: Experimental investigation of porosity distribution in selective laser melted Inconel 718. Procedia Manufacturing 48: 807-813
Rossignol, K.; Suryadi, A.; Herr, M.; Schmidt, J.; Tychsen, J. 2020: Experimental investigation of porous materials for trailing-edge noise reduction. International Journal of Aeroacoustics 19(6-8): 365-384
Liu, Z.; Han, J.; Su, Y.; An, Q. 2017: Experimental investigation of porous metal materials in high-speed micro-milling process. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 232(14): 2488-2498
Gill, J.; Atkinson, G.; Cowpe, E.; Phylaktou, H.; Andrews, G. 2020: Experimental investigation of potential confined ignition sources for vapour cloud explosions. Process Safety and Environmental Protection 135: 187-206
Lazarev, V.A.; Malekhanov, A.I.; Merklin, L.R.; Romanova, V.I.; Stromkov, A.A.; Talanov, V.I.; Khil'ko, A.I. 2012: Experimental investigation of potentialities of seismoacoustic sea-bottom sounding using coherent pulse signals. Acoustical Physics 58(2): 192-199
Cicala, G.; Shakhatov, V A.; Pascale, O D.; Capezzuto, P.; Bruno, G. 1999: Experimental investigation of powder formation in Si F4-H2and Si H4-H2r.f. discharges. Plasma Sources Science and Technology 8(2): 279-284
Benlahbib, B.; Bouarroudj, N.; Mekhilef, S.; Abdeldjalil, D.; Abdelkrim, T.; Bouchafaa, F.; lakhdari, A. 2020: Experimental investigation of power management and control of a PV/wind/fuel cell/battery hybrid energy system microgrid. International Journal of Hydrogen Energy 45(53): 29110-29122
Ghadiri Zahrani, E.; Sedghi, A. 2014: Experimental investigation of precision turning of Monel K-500 under dry conditions. International Journal of Advanced Manufacturing Technology 73(9-12): 1265-1272
Chen, L.; Chen, S.; Liu, L.; Zhang, B. 2018: Experimental investigation of precooling desiccant-wheel air-conditioning system in a high-temperature and high-humidity environment. International Journal of Refrigeration 95: 83-92
Omidi, M.; Emami, M.D. 2020: Experimental investigation of premixed combustion and thermal efficiency in a porous heating burner. International Journal of Energy Research 45(2): 1948-1958
Tang, G.; Jin, P.; Bao, Y.; Chai, W.S.; Zhou, L. 2021: Experimental investigation of premixed combustion limits of hydrogen and methane additives in ammonia. International Journal of Hydrogen Energy 46(39): 20765-20776
Hatami, M.; Domairry, G.; Mirzababaei, S. 2017: Experimental investigation of preparing and using the H 2 O based nanofluids in the heating process of HVAC system model. International Journal of Hydrogen Energy 42(12): 7820-7825
Rajan, S.; Sutton, M.A.; Wehbe, R.; Tatting, B.; Gürdal, Z.; Kidane, A.; Harik, R. 2019: Experimental investigation of prepreg slit tape wrinkling during automated fiber placement process using Stereo DIC. Composites Part B: Engineering 160: 546-557
Pourabdollah, K.; Samadian Zakaria, M.; Mir Najafizadeh, S.M.; Motaghedi, F. 2019: Experimental investigation of process parameters during graphitization of catalytic coke. International Journal of Coal Science-Technology 6(4): 611-620
Kumar, U.A.; Saidulu, G.; Laxminaryana, P. 2020: Experimental investigation of process parameters for machining of Nimonic alloy 75 using wire-cut EDM. Materials Today: Proceedings 27: 1362-1368
Lee, H.; Wang, H.; Park, J.; Jeong, H. 2014: Experimental investigation of process parameters for roll-type linear chemical mechanical polishing (Roll-CMP) system. Precision Engineering 38(4): 928-934
Wei, L.; Yu, H.; Sun, R.; Liu, C.; Chen, M.; Liu, H.; Xiong, J.; Qin, X. 2020: Experimental investigation of process parameters for the filtration property of nanofiber membrane fabricated by needleless electrospinning apparatus. Journal of Industrial Textiles 50(9): 1528-1541
Bindhushree, B.; Arunadevi, M.; Prakash, C. 2021: Experimental investigation of process parameters for turning aluminum using ANOVA. Materials Today: Proceedings 46: 5060-5066
Vekteris, V.; Strishka, V.; Ozarovskis, D.; Mokshin, V. 2014: Experimental investigation of processes in acoustic cyclone separator. Advanced Powder Technology 25(3): 1118-1123
Rabbani, M.; Dincer, I.; Naterer, G. 2014: Experimental investigation of processing parameters and effects on chloralkali products in an electrolysis based chloralkali reactor. Chemical Engineering and Processing: Process Intensification 82: 9-18
Ren, P.; Li, Y.; Lu, X.; Guan, H.; Zhou, Y. 2016: Experimental investigation of progressive collapse resistance of one-way reinforced concrete beam–slab substructures under a middle-column-removal scenario. Engineering Structures 118: 28-40
Zhou, X.; Zhang, J.; Qian, Q.; Niu, Y. 2019: Experimental investigation of progressive cracking processes in granite under uniaxial loading using digital imaging and AE techniques. Journal of Structural Geology 126: 129-145
Ai, C.; Li, X.; Zhang, J.; Jia, D.; Tan, W. 2018: Experimental investigation of propagation mechanisms and fracture morphology for coalbed methane reservoirs. Petroleum Science 15(4): 815-829
Aminaei, H.; Dehghan Manshadi, M.; Mostofizadeh, A.R. 2018: Experimental investigation of propeller slipstream effects on the wing aerodynamics and boundary layer treatment at low Reynolds number. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering 233(8): 3033-3041
Mehmed, O.; Murthy, D.V. 1991: Experimental investigation of propfan aeroelastic response in off-axis flow with mistuning. Journal of Propulsion and Power 7(1): 90-98
Ma, W.; Tomac, I. 2021: Experimental investigation of proppant clustering in intersected fractures. Journal of Petroleum Exploration and Production Technology 11(4): 1727-1742
Wen, Q.; Wang, S.; Duan, X.; Li, Y.; Wang, F.; Jin, X. 2016: Experimental investigation of proppant settling in complex hydraulic-natural fracture system in shale reservoirs. Journal of Natural Gas Science and Engineering 33: 70-80
Lee, S.; Chang, S. 2018: Experimental investigation of pull-through force of wing-type fastening inserts co-cured in long fiber prepreg sheet (LFPS). Composite Structures 206: 978-986
Gao, C.Q.; Lin, Z.F.; Wang, R.; Zhang, Y.S.; Gao, M.W.; Zheng, Y. 2010: Experimental investigation of pulse diodes side-pumped 2 μm Tm:YAG lasers. Laser Physics 21(1): 70-73
Shi, Y.; Zhu, S. 2017: Experimental investigation of pulse tube refrigerator with displacer. International Journal of Refrigeration 76: 1-6
Wang, M.; Xu, H.; Lin, Y.; Zhang, Z.; Zhu, S. 2018: Experimental investigation of pulse tube refrigerator with rod type displacer as phase shifter. International Journal of Refrigeration 93: 47-51
Belousova, I.M.; Panfilov, V.G. 1970: Experimental investigation of pulsed operation of compound laser using inhomogeneous components. Journal of Applied Spectroscopy 12(6): 753-758
Dong, B.; Ricles, J.M.; Phillips, B.M. 2021: Experimental investigation of pulse‐type ground motion effects on a steel building with nonlinear viscous dampers. Earthquake Engineering-Structural Dynamics 50(15): 4032-4050
Chu, X.; Wang, Z.; Chen, C.; Lin, S.; Leotoing, L. 2020: Experimental investigation of punch curvature influence in Nakazima test and numerical FLD prediction of AA5086. Ferroelectrics 565(1): 12-25
Li, X.; Tan, Z.; Huang, X.; Bai, J.; Liu, J.; Hong, W. 2019: Experimental investigation of quantum interference in charge transport through molecular architectures. Journal of Materials Chemistry C 7(41): 12790-12808
Toliver, P.; Runser, R.; Chapuran, T.; Jackel, J.; Banwell, T.; Goodman, M.; Hughes, R.; Peterson, C.; Derkacs, D.; Nordholt, J.; Mercer, L.; McNown, S.; Goldman, A.; Blake, J. 2003: Experimental investigation of quantum key distribution through transparent optical switch elements. IEEE Photonics Technology Letters 15(11): 1669-1671
Fathi, A.; Liaghat, G.; Sabouri, H.; Chizari, M.; Hadavinia, H.; Chitsaz Charandabi, S. 2021: Experimental investigation of quasi-static behavior of composite and fiber metal laminate panels modified by graphene nanoplatelets. Journal of Reinforced Plastics and Composites 40(13-14): 518-532
Adler, H.; Piel, A. 1986: Experimental investigation of radially resolved plasma parameters in a low-pressure helium arc. Journal of Physics D: Applied Physics 19(8): 1477-1490
Bonefačić, D.; Hrabar, S.; Kvakan, D. 2006: Experimental investigation of radiation properties of an antenna embedded in low permittivity thin-wire-based metamaterial. Microwave and Optical Technology Letters 48(12): 2581-2586
Kovalev, A.A.; Levashkevich, L.V. 1978: Experimental investigation of radiation self-modulation in a ruby laser with passive closing of an electrooptic shutter. Journal of Applied Spectroscopy 28(4): 427-430
Pedersen, H.B.; Brink, C.; Andersen, L.H.; Bjerre, N.; Hvelplund, P.; Kella, D.; Shen, H. 1998: Experimental investigation of radiative lifetimes of vibrational levels at the electronic ground state of C2−. The Journal of Chemical Physics 109(14): 5849-5855
Uğur, F.A.; Turhan, . 2011: Experimental investigation of radiocesium sorption on ceramic clay using a batch method. Journal of Radioanalytical and Nuclear Chemistry 288(2): 347-350
Li, Y.; Pimenta, S.; Singgih, J.; Nothdurfter, S.; Schuffenhauer, K. 2017: Experimental investigation of randomly-oriented tow-based discontinuous composites and their equivalent laminates. Composites Part A: Applied Science and Manufacturing 102: 64-75
Porodnov, B.T.; Suetin, P.E.; Borisov, S.F.; Akinshin, V.D. 1974: Experimental investigation of rarefied gas flow in different channels. Journal of Fluid Mechanics 64(3): 417-438
Zhou, C.; Wang, L.; Chen, S.; Zhang, P.; Liu, H.; Zhao, Y. 2019: Experimental investigation of reaction kinetics of gas–liquid–solid Bunsen reaction in iodine–sulfur process. International Journal of Hydrogen Energy 44(10): 4608-4615
Cheng, L.; Zhang, C.; Yang, X.; Qi, D.; Zhou, Y.; Holtz, F. 2019: Experimental investigation of reactions between two-mica granite and boron-rich fluids: Implications for the formation of tourmaline granite. Science China Earth Sciences 62(10): 1630-1644
Chang, Y.-.; Sullivan, R.S.; Bagchi, U.; Wilson, J.R. 1985: Experimental investigation of real-time scheduling in flexible manufacturing systems. Annals of Operations Research 3(7): 355-377
Chang, T.; Chao, Y.; Cheng, T. 2018: Experimental investigation of reattachment behavior of turbulent lifted diffusion jet flames induced by repetitive DC electric pulse discharges with conditional PIV. Combustion Science and Technology 191(4): 726-744
Asai, M.; Kaneko, M. 2000: Experimental investigation of receptivity of a shear layer separating at a convex corner. Fluid Dynamics Research 27(2): 117-128
Rizzuto, J. 2018: Experimental investigation of reciprocally supported element (RSE) lattice honeycomb domes structural behaviour. Engineering Structures 166: 496-510
Loktionov, E.Y.; Protasov, Y.S.; Protasov, Y.Y. 2013: Experimental investigation of recoil-momentum-generation efficiency under near-IR femtosecond laser ablation of refractory metals in vacuum. Optics and Spectroscopy 115(5): 758-763
Christiansen, K.P.; Frederiksen, V.T. 1983: Experimental investigation of rectangular concrete slabs with horizontal restraints. Matériaux et Constructions 16(3): 179-192
Pashchenko, D. 2019: Experimental investigation of reforming and flow characteristics of a steam methane reformer filled with nickel catalyst of various shapes. Energy Conversion and Management 185: 465-472
Li, G.; Huang, L.; Tao, L. 2017: Experimental investigation of refrigerant condensation heat transfer characteristics in the horizontal microfin tubes. Applied Thermal Engineering 123: 1484-1493
Zhu, G.; Ren, B.; Wen, H.; Wang, G.; Wang, Y. 2020: Experimental investigation of regular wave propagation over an idealized reef model. Journal of Hydrodynamics 32(4): 717-726
Saha, P.; Meesaraganda, L.V. 2019: Experimental investigation of reinforced SCC beam-column joint with rectangular spiral reinforcement under cyclic loading. Construction and Building Materials 201: 171-185
Shatarat, N.; Katkhuda, H.; Abdel-Jaber, M.; Alqam, M. 2016: Experimental investigation of reinforced concrete beams with spiral reinforcement in shear. Construction and Building Materials 125: 585-594
Tsoukantas, G.; Stournaras, A.; Chryssolouris, G. 2008: Experimental investigation of remote welding with CO2 and Nd:YAG laser-based systems. Journal of Laser Applications 20(1): 50-58
Feng, W.; Xu, F.; Li, M.; Zhang, X.; You, H. 2018: Experimental investigation of repair of impact-damaged aircraft winglet under static bending moments. Journal of Adhesion Science and Technology 32(13): 1410-1427
Larpudomlert, R.; Torrealba, V.A.; Karpyn, Z.T.; Halleck, P. 2013: Experimental investigation of residual saturation in mixed-wet porous media using a pore-scale approach. Journal of Petroleum Exploration and Production Technology 4(2): 175-187
Meng-yang, Q.; Bang-yan, Y.; Xiong, J.; Ai-dong, H. 2012: Experimental investigation of residual stress distribution in pre-stress cutting. International Journal of Advanced Manufacturing Technology 65(1-4): 355-361
Kumar, Y.A.; Shafee, S.; Praveen, B. 2019: Experimental investigation of residual stresses in a DIECASTED aluminium flywheel. Materials Today: Proceedings 19: A10-A18
Jafrey, D.D.; Panneerselvam, K. 2018: Experimental investigation of resistance welded polypropylene nanocomposite joints. Journal of Adhesion Science and Technology 32(21): 2350-2363
Zappe, H.H.; Landman, B.S. 1978: Experimental investigation of resonances in low‐QJosephson interferometer devices. Journal of Applied Physics 49(7): 4149-4154
Kumar, R.; Malathi, P. 2010: Experimental investigation of resonant frequency of multilayered rectangular and circular microstrip antennas. Microwave and Optical Technology Letters 53(2): 352-356
Nayfeh, A.; Balachandran, B. 1990: Experimental investigation of resonantly forced oscillations of a two-degree-of-freedom structure. International Journal of Non-Linear Mechanics 25(2-3): 199-209
Boiko, B.B.; Vashkevich, I.M.; Petrov, N.S. 1976: Experimental investigation of resonator with two-dimensional path of beam for incidence close to the Brewster angle. Journal of Applied Spectroscopy 24(1): 19-23
Gudarzifar, H.; Sabbaghi, S.; Rezvani, A.; Saboori, R. 2020: Experimental investigation of rheological and filtration properties and thermal conductivity of water-based drilling fluid enhanced. Powder Technology 368: 323-341
Ahmadi, N.; Saedodin, S.; Rostamian, S.H. 2020: Experimental investigation of rheological behavior of fullerene/hydraulic oil nanofluid. Chemical Papers 74(11): 3963-3973
Afshari, A.; Akbari, M.; Toghraie, D.; Yazdi, M.E. 2018: Experimental investigation of rheological behavior of the hybrid nanofluid of MWCNT–alumina/water (80%)–ethylene-glycol (20%). Journal of Thermal Analysis and Calorimetry 132(2): 1001-1015
Le Ba, T.; Várady, Z.I.; Lukács, I.E.; Molnár, J.; Balczár, I.A.; Wongwises, S.; Szilágyi, I.M. 2020: Experimental investigation of rheological properties and thermal conductivity of Si O2–P25 Ti O2 hybrid nanofluids. Journal of Thermal Analysis and Calorimetry 146(1): 493-507
Zhao, Z.; Ma, J.; Guo, J.; Gao, Y.; Omeiza, A.A. 2016: Experimental investigation of rheological properties of fiber-laden crosslinked fracturing fluids. Journal of Natural Gas Science and Engineering 32: 28-34
Yu, L.; Bian, Y.; Liu, Y.; Xu, X. 2020: Experimental investigation of rheological properties of low concentrated Ti O2/water and MWCNT-Ti O2/water hybrid nanofluids. Heat and Mass Transfer 56(8): 2545-2556
Saasen, A.; Rafoss, E.; Behzadi, A. 1991: Experimental investigation of rheology and thickening time of class G oil well cement slurries containing glycerin. Cement and Concrete Research 21(5): 911-916
Liu, P.; Zhou, X.; Qian, Q. 2021: Experimental investigation of rigid confinement effects of radial strain on dynamic mechanical properties and failure modes of concrete. International Journal of Mining Science and Technology 31(5): 939-951
Velu, R.; Vaheed, N.; Ramachandran, M.K.; Raspall, F. 2019: Experimental investigation of robotic 3D printing of high-performance thermoplastics (PEEK): a critical perspective to support automated fibre placement process. International Journal of Advanced Manufacturing Technology 108(4): 1007-1025
Geng, X.; Shi, Z.; Cheng, K. 2016: Experimental investigation of roll characteristics of a cruciform-finned slender body. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering 231(4): 698-712
Chen, W.; Rheem, C. 2018: Experimental investigation of rotating cylinders in flow. Journal of Marine Science and Technology 24(1): 111-122
Guoqing, L.; Junqiang, Z.; Hongwu, D.; Zhi, T.; Haiwang, L. 2013: Experimental investigation of rotating film cooling performance in a low speed 1.5-stage turbine. International Journal of Heat and Mass Transfer 61: 18-27
Young, L.A.; Graham, D.R.; Stroub, R.H. 1987: Experimental investigation of rotorcraft hub and shaft fairing drag reduction. Journal of Aircraft 24(12): 861-867
Elchalakani, M.; Hassanein, M.; Karrech, A.; Yang, B. 2018: Experimental investigation of rubberised concrete-filled double skin square tubular columns under axial compression. Engineering Structures 171: 730-746
Baker, E.H. 1968: Experimental investigation of sandwich cylinders and cones subjectedto axial compression. AIAA Journal 6(9): 1769-1770
Veeramanikandan, M.; Arjunan, T.; Jidhesh, P. 2020: Experimental investigation of sandwich glazed solar photovoltaic module. Materials Today: Proceedings 27: 136-139
Masoudi Moghaddam, S.A.; Yarmohammad Tooski, M.; Jabbari, M.; Khorshidvand, A.R. 2020: Experimental investigation of sandwich panels with hybrid composite face sheets and embedded shape memory alloy wires under low velocity impact. Polymer Composites 41(11): 4811-4829
Fang, X.; Sudarchikov, A.M.; Chen, Y.; Dong, A.; Wang, R. 2016: Experimental investigation of saturated flow boiling heat transfer of nitrogen in a macro-tube. International Journal of Heat and Mass Transfer 99: 681-690
Kirchner, E.; Shaw, H.; Winslow, D. 1966: Experimental investigation of saturation effects in ferrite frequency doublers. IEEE Transactions on Magnetics 2(4): 691-696
Rajagopalan, A.G.; Tong, C. 2003: Experimental investigation of scalar-scalar-dissipation filtered joint density function and its transport equation. Physics of Fluids 15(1): 227-244
Zink, P.; Samii, M.; Boehm, W.; Luedemann, W.; Kreinberg, K.; Rathjen, C. 1997: Experimental investigation of screw-to-bone interaction in human cervical vertebrae. Clinical Neurology and Neurosurgery 99: S173-S174
Aghsaee, P.; Boegman, L. 2015: Experimental investigation of sediment resuspension beneath internal solitary waves of depression. Journal of Geophysical Research: Oceans 120(5): 3301-3314
Gan, L.; Shen, Z.; Xiao, M. 2020: Experimental investigation of seepage characteristics in porous rocks with a single fracture. Hydrogeology Journal 28(8): 2933-2946
Zheng, Y.; Wang, X.; Deng, L.; Shen, F.; Li, X. 2011: Experimental investigation of segmented adaptive optics for spatial laser array in an atmospheric turbulence condition. Optics Communications 284(20): 4975-4982
Xu, S.; Wu, C.; Liu, Z.; Han, K.; Su, Y.; Zhao, J.; Li, J. 2017: Experimental investigation of seismic behavior of ultra-high performance steel fiber reinforced concrete columns. Engineering Structures 152: 129-148
Fiorino, L.; Terracciano, M.T.; Landolfo, R. 2016: Experimental investigation of seismic behaviour of low dissipative CFS strap-braced stud walls. Journal of Constructional Steel Research 127: 92-107
Nikolić, .; Krstevska, L.; Marović, P.; Smoljanović, H. 2019: Experimental investigation of seismic behaviour of the ancient Protiron monument model. Earthquake Engineering-Structural Dynamics 48(6): 573-593
Kargaran, A.; Kheyroddin, A. 2019: Experimental investigation of seismic strengthening of reinforced concrete short columns using externally bonded reinforcement, near surface mounted, and hybrid techniques. Journal of Composite Materials 54(9): 1177-1195
Armbruster, W.; Hardi, J.S.; Suslov, D.; Oschwald, M. 2018: Experimental investigation of self-excited combustion instabilities with injection coupling in a cryogenic rocket combustor. Acta Astronautica 151: 655-667
Su, J.; Qiu, J.; Schlangen, E.; Wang, Y. 2014: Experimental investigation of self-healing behavior of bitumen/microcapsule composites by a modified beam on elastic foundation method. Materials and Structures 48(12): 4067-4076
Huang, G.; Zhu, Y.; Liao, Z.; Jiang, P. 2018: Experimental investigation of self-pumping internal transpiration cooling. International Journal of Heat and Mass Transfer 123: 514-522
Liu, Y.; Zhou, W. 2021: Experimental investigation of self‐centering hybrid concrete shear walls subjected to horizontal cyclic loading. Earthquake Engineering-Structural Dynamics 50(14): 3754-3770
Gomaa, A G.; Underwood, C P.; Bond, T J.; Penlington, R. 2002: Experimental investigation of sensible heat transfer in fin-and-tube cooling coils. Building Services Engineering Research and Technology 23(3): 197-204
Hahn, M. 1969: Experimental investigation of separated flow over a cavity at hypersonic speed. AIAA Journal 7(6): 1092-1098
Pouryoussefi, S.G.; Mirzaei, M.; Alinejad, F.; Pouryoussefi, S.M. 2016: Experimental investigation of separation bubble control on an iced airfoil using plasma actuator. Applied Thermal Engineering 100: 1334-1341
Wallace, R.H.; Hillery, H.V.; Barnard, G.R.; Marks, B.M.; McKinney, C.M. 1975: Experimental investigation of several passive sonar targets. Journal of the Acoustical Society of America 57(4): 862-869
Lee, U.; Dong, J.; Chung, J. 2018: Experimental investigation of sewage sludge solid waste conversion to syngas using high temperature steam gasification. Energy Conversion and Management 158: 430-436
Yan, Q.; Lemanski, C.; Karpyn, Z.; Ayala, L. 2015: Experimental investigation of shale gas production impairment due to fracturing fluid migration during shut-in time. Journal of Natural Gas Science and Engineering 24: 99-105
Yang, J.; Hu, C.; Zhu, Y.; Wang, Z.; Zhang, M. 2017: Experimental investigation of shaping disturbance observer design for motion control of precision mechatronic stages with resonances. Mechanical Systems and Signal Processing 92: 334-348
Sonkamble, V.; Dhondapure, P.; Narasimhan, K.; Tewari, A. 2019: Experimental investigation of shear band and shear strain field evolution during blanking of AA6082 sheet. The Journal of Strain Analysis for Engineering Design 54(2): 149-158
Bui, T.; Abouri, S.; Limam, A.; NaNa, W.; Tedoldi, B.; Roure, T. 2017: Experimental investigation of shear strength of full-scale concrete slabs subjected to concentrated loads in nuclear buildings. Engineering Structures 131: 405-420
Tong, Z.; Fu, P.; Zhou, S.; Dafalias, Y.F. 2014: Experimental investigation of shear strength of sands with inherent fabric anisotropy. Acta Geotechnica 9(2): 257-275
Zhao, Q.; Zhao, J.; Dang, J.; Chen, J.; Shen, F. 2019: Experimental investigation of shear walls using carbon fiber reinforced polymer bars under cyclic lateral loading. Engineering Structures 191: 82-91
Rudra Murthy, B.; Thanaiah, K.; Gumtapure, V. 2022: Experimental investigation of shellac wax as potential bio-phase change material for medium temperature solar thermal energy storage applications. Solar Energy 231: 1002-1014
Lu, L.; Wang, Y.; Yan, G.; Fan, X.; Xu, S. 2020: Experimental investigation of shock train unsteady movement in a mixing duct. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering 234(12): 1883-1892
Stockbridge, R.D. 1989: Experimental investigation of shock wave/boundary-layer interactionsin an annular duct. Journal of Propulsion and Power 5(3): 346-352
Cummings, J.C. 1976: Experimental investigation of shock waves in liquid helium i and Ii. Journal of Fluid Mechanics 75(2): 373-383
Laguarda, L.; Santiago Patterson, J.; Schrijer, F.F.J.; van Oudheusden, B.W.; Hickel, S. 2021: Experimental investigation of shock–shock interactions with variable inflow Mach number. Shock Waves 31(5): 457-468
Moody, J.D.; MacGowan, B.J.; Glenzer, S.H.; Kirkwood, R.K.; Kruer, W.L.; Montgomery, D.S.; Schmitt, A.J.; Williams, E.A.; Stone, G.F. 2000: Experimental investigation of short scalelength density fluctuations in laser-produced plasmas. Physics of Plasmas 7(5): 2114-2125
Seerangurayar, T.; Al-Ismaili, A.M.; Janitha Jeewantha, L.; Al-Nabhani, A. 2019: Experimental investigation of shrinkage and microstructural properties of date fruits at three solar drying methods. Solar Energy 180: 445-455
Brandeis, J.; Gill, J. 1996: Experimental investigation of side-jet steering for supersonic and hypersonic missiles. Journal of Spacecraft and Rockets 33(3): 346-352
Rapp, L. 1997: Experimental investigation of signal distortions induced by cross-phase modulation combined with dispersion. IEEE Photonics Technology Letters 9(12): 1592-1594
Balcı, O.; Çoban, O.; Bora, M..; Akagündüz, E.; Yalçin, E.B. 2017: Experimental investigation of single and repeated impacts for repaired honeycomb sandwich structures. Materials Science and Engineering: A682: 23-30
He, J.; Liu, J.; Xu, X. 2018: Experimental investigation of single bubble growth in the boiling of the superheated liquid mixed refrigerants. International Journal of Heat and Mass Transfer 127: 553-565
Kumar, A.; Rathakrishnan, E. 2014: Experimental investigation of single expansion ramp performance. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering 229(7): 1330-1335
Von Der Linde, D.; Bernecker, O.; Kaiser, W. 1970: Experimental investigation of single picosecond pulses. Optics Communications 2(4): 149-152
Firoozabadi, B.; Afshin, H.; Sheikhi, J. 2009: Experimental investigation of single value variables of three-dimensional density current. Canadian Journal of Physics 87(2): 125-134
Sun, H.; Maeda, M.; Takada, K.; Chon, J.W.M.; Gu, M.; Kawata, S. 2003: Experimental investigation of single voxels for laser nanofabrication via two-photon photopolymerization. Applied Physics Letters 83(5): 819-821
van Vliet, M.R.; van Mier, J.G. 2000: Experimental investigation of size effect in concrete and sandstone under uniaxial tension. Engineering Fracture Mechanics 65(2-3): 165-188
Zhou, J.; Bi, F.; Wang, Z.; Zhang, J. 2016: Experimental investigation of size effect on mechanical properties of carbon fiber reinforced polymer (CFRP) confined concrete circular specimens. Construction and Building Materials 127: 643-652
Siddiqui, N.A.; Alsayed, S.H.; Al-Salloum, Y.A.; Iqbal, R.A.; Abbas, H. 2014: Experimental investigation of slender circular RC columns strengthened with FRP composites. Construction and Building Materials 69: 323-334
Velavan, K.; Palanikumar, K.; Senthilkumar, N. 2021: Experimental investigation of sliding wear behaviour of boron carbide and mica reinforced aluminium alloy hybrid metal matrix composites using Box-Behnken design. Materials Today: Proceedings 44: 3803-3810
Dolatshahi, K.M.; Gharavi, A.; Mirghaderi, S.R. 2018: Experimental investigation of slitted web steel moment resisting frame. Journal of Constructional Steel Research 145: 438-448
Ling, C C.; Weng, H M.; Beling, C D.; Fung, S. 2002: Experimental investigation of slow-positron emission from 4H-Si C and 6H-Si C surfaces. Journal of Physics: Condensed Matter 14(25): 6373-6381
Nandakumar, M.; Sudhakar, K.; Natu, H.; Jagadish, G. 2018: Experimental investigation of slurry erosion characteristics of laser treated nickel aluminum bronze. Materials Today: Proceedings 5(1): 2641-2649
Zhu, L.; Hu, X.; Jiang, R.; Song, Y.; Qu, S. 2019: Experimental investigation of small fatigue crack growth due to foreign object damage in titanium alloy TC4. Materials Science and Engineering: A739: 214-224
van Deursen, A.P.J.; Reuss, J. 1975: Experimental investigation of small he clusters. The Journal of Chemical Physics 63(10): 4559-4560
Mishra, S.; Vishwakarma, P.K.; Sharma, A.; Mishra, K.B. 2021: Experimental investigation of small-scale CS2 (carbon disulphide) pool fires. Process Safety and Environmental Protection 145: 203-210
Majeed, R.; Waqas, A.; Sami, H.; Ali, M.; Shahzad, N. 2020: Experimental investigation of soiling losses and a novel cost-effective cleaning system for PV modules. Solar Energy 201: 298-306
Sheikhbahaei, V.; Baniasadi, E.; Naterer, G. 2018: Experimental investigation of solar assisted hydrogen production from water and aluminum. International Journal of Hydrogen Energy 43(19): 9181-9191
Fadaei, N.; Kasaeian, A.; Akbarzadeh, A.; Hashemabadi, S.H. 2018: Experimental investigation of solar chimney with phase change material (PCM). Renewable Energy 123: 26-35
Chaudhary, R.; Yadav, A. 2020: Experimental investigation of solar cooking system based on evacuated tube solar collector for the preparation of concentrated sugarcane juice used in jaggery making. Environment, Development and Sustainability 23(1): 647-663
Kumar, A.; Yadav, A. 2016: Experimental investigation of solar driven desiccant air conditioning system based on silica gel coated heat exchanger. International Journal of Refrigeration 69: 51-63
Khelfaoui, N.; Djafour, A.; Ghenai, C.; Laib, I.; Danoune, M.; Gougui, A. 2021: Experimental investigation of solar hydrogen production PV/PEM electrolyser performance in the Algerian Sahara regions. International Journal of Hydrogen Energy 46(59): 30524-30538
Xu, Y.; Li, M.; Luo, X.; Ma, X.; Wang, Y.; Li, G.; Hassanien, R.H.E. 2018: Experimental investigation of solar photovoltaic operated ice thermal storage air-conditioning system. International Journal of Refrigeration 86: 258-272
Karthick, K.; Suresh, S.; Joy, G. C.; Dhanuskodi, R. 2019: Experimental investigation of solar reversible power generation in Thermoelectric Generator (TEG) using thermal energy storage. Energy for Sustainable Development 48: 107-114
Uthirapathy, C.; Swaminathan, G.; Mathivanan, A.; Kumar, S.; Manikandan, G.; Madhesh, D. 2020: Experimental investigation of solar steam generator using nanocoating. Materials Today: Proceedings 33: 428-434
Kaviti, A.K.; Yadav, A.; Shukla, A. 2019: Experimental investigation of solar still with opaque north triangular face. International Journal of Green Energy 16(6): 442-449
Lv, S.; He, W.; Hu, Z.; Jinwei, M.; Chen, H.; Feiyang, S.; Minghou, L. 2019: Experimental investigation of solar thermoelectric (STEG) co-generation system. Energy Procedia 158: 892-897
Jemli, M.R.; Naili, N.; Farhat, A.; Guizani, A. 2017: Experimental investigation of solar tower with chimney effect installed in CRTEn, Tunisia. International Journal of Hydrogen Energy 42(13): 8650-8660
Touaba, O.; Ait Cheikh, M.S.; Slimani, M.E.; Bouraiou, A.; Ziane, A.; Necaibia, A.; Harmim, A. 2020: Experimental investigation of solar water heater equipped with a solar collector using waste oil as absorber and working fluid. Solar Energy 199: 630-644
Manoj Kumar, P.; Mylsamy, K. 2018: Experimental investigation of solar water heater integrated with a nanocomposite phase change material. Journal of Thermal Analysis and Calorimetry 136(1): 121-132
Kumar, A.; Yadav, A. 2016: Experimental investigation of solar-powered desiccant cooling system by using composite desiccant "Ca Cl2/jute". Environment, Development and Sustainability 19(4): 1279-1292
Yamaguchi, H.; Yamasaki, H.; Kizilkan, O. 2019: Experimental investigation of solar‐assisted transcritical CO 2 Rankine cycle for summer and winter conditions from exergetic point of view. International Journal of Energy Research 44(2): 1089-1102
Liu, L.; Fang, Z.; Wu, Y.; Lai, X.; Wang, P.; Song, K. 2018: Experimental investigation of solid-liquid two-phase flow in cemented rock-tailings backfill using Electrical Resistance Tomography. Construction and Building Materials 175: 267-276
Allahvirdizadeh, P.; Kuru, E.; Parlaktuna, M. 2016: Experimental investigation of solids transport in horizontal concentric annuli using water and drag reducing polymer-based fluids. Journal of Natural Gas Science and Engineering 35: 1070-1078
Huang, Y.; Zhou, Z.; Li, L.; Chen, J. 2015: Experimental investigation of solute transport in unsaturated fractured rock. Environmental Earth Sciences 73(12): 8379-8386
Bensaid, S.; Marchisio, D.; Russo, N.; Fino, D. 2009: Experimental investigation of soot deposition in diesel particulate filters. Catalysis Today 147: S295-S300
Kruse, S.; Ye, J.; Sun, Z.; Attili, A.; Dally, B.; Medwell, P.; Pitsch, H. 2019: Experimental investigation of soot evolution in a turbulent non-premixed prevaporized toluene flame. Proceedings of the Combustion Institute 37(1): 849-857
Roussillo, M.; Scouflaire, P.; Candel, S.; Franzelli, B. 2019: Experimental investigation of soot production in a confined swirled flame operating under perfectly premixed rich conditions. Proceedings of the Combustion Institute 37(1): 893-901
Hafizi, A.; Jafari, M.; Rahimpour, M.; Hassanajili, S. 2016: Experimental investigation of sorption enhanced chemical looping reforming for high purity hydrogen production using Ce O 2 –Ca O CO 2 sorbent and 15Fe–5Ca/Al 2 O 3 oxygen carrier. Journal of the Taiwan Institute of Chemical Engineers 65: 185-196
Belyaev, I.V.; Golubev, A.Y.; Zverev, A.Y.; Makashov, S.Y.; Palchikovskiy, V.V.; Sobolev, A.F.; Chernykh, V.V. 2015: Experimental investigation of sound absorption of acoustic wedges for anechoic chambers. Acoustical Physics 61(5): 606-614
Chopra, S.; Bhat, S.; Joseph, J.; Rai, S.; Rai, J. 1994: Experimental investigation of source correlations in the time domain. Optics Communications 109(3-4): 205-208
Keska, J.K. 1993: Experimental investigation of spatial concentration spectra of a solid in a slurry in horizontal pipeline flow. Flow Measurement and Instrumentation 4(3): 155-162
Keska, J.K. 1994: Experimental investigation of spatial concentration spectra of a solid in a slurry in horizontal pipeline flow. Flow Measurement and Instrumentation 5(3): 155-163
Deng, Y.B.; Fu, X.Q.; Tan, C.; Yang, H.; Deng, S.G.; Xiong, C.X.; Zhang, G.F. 2013: Experimental investigation of spatiotemporal evolution of femtosecond laser pulses during small-scale self-focusing. Applied Physics B 114(3): 449-454
Liu, J.; Yang, Y.; Liu, J.; Zhou, X. 2017: Experimental investigation of special-shaped concrete-filled steel tubular column to steel beam connections under cyclic loading. Engineering Structures 151: 68-84
Wu, X.; Li, L.; Zhao, M.; He, N. 2015: Experimental investigation of specific cutting energy and surface quality based on negative effective rake angle in micro turning. International Journal of Advanced Manufacturing Technology 82(9-12): 1941-1947
Bazarov, E N.; Gubin, V. P.; Sazonov, A. I.; Starostin, N. I.; Usov, A. I. 2002: Experimental investigation of spectral characteristics of an erbium-doped fibre amplifier operating in the recirculation regime. Quantum Electronics 32(8): 743-746
Adishchev, Y.N.; Didenko, A.N.; Zabaev, V.N.; Kalinin, B.N.; Kurkov, A.A.; Potylitsin, A.P.; Tomchakov, V.K.; Vorobiev, A.S. 1982: Experimental investigation of spectral characteristics of coherent bremsstrahlung and channeling radiation for high-energy electrons. Radiation Effects 60(1-4): 61-66
Salem, E.; Khalil, M.; Bedewi, M. 1983: Experimental investigation of spherical bearings lubricated with non-newtonian fluids. Wear 89(1): 83-90
Bauwens, C.; Bergthorson, J.; Dorofeev, S. 2017: Experimental investigation of spherical-flame acceleration in lean hydrogen-air mixtures. International Journal of Hydrogen Energy 42(11): 7691-7697
Leskov, E.; Osipov, G.; Yudin, E. 1970: Experimental investigation of splitter duct silencers. Applied Acoustics 3(1): 47-56
Zhou, H.; Zhang, Q.; Dai, C.; Li, Y.; Lv, W.; Wu, Y.; Cheng, R.; Zhao, M. 2019: Experimental investigation of spontaneous imbibition process of nanofluid in ultralow permeable reservoir with nuclear magnetic resonance. Chemical Engineering Science 201: 212-221
Yingwen, Y.; Longfei, D.; Rong, X. 2015: Experimental investigation of spray characteristics in model combustor. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering 229(13): 2351-2357
Broumand, M.; Ahmed, M.M.; Birouk, M. 2019: Experimental investigation of spray characteristics of a liquid jet in a turbulent subsonic gaseous crossflow. Proceedings of the Combustion Institute 37(3): 3237-3244
Zhang, Z.; Jiang, P.; Christopher, D.M.; Liang, X. 2015: Experimental investigation of spray cooling on micro-, nano- and hybrid-structured surfaces. International Journal of Heat and Mass Transfer 80: 26-37
Zhang, Z.; Jiang, P.; Ouyang, X.; Chen, J.; Christopher, D.M. 2014: Experimental investigation of spray cooling on smooth and micro-structured surfaces. International Journal of Heat and Mass Transfer 76: 366-375
Labergue, A.; Gradeck, M.; Lemoine, F. 2016: Experimental investigation of spray impingement hydrodynamic on a hot surface at high flow rates using phase Doppler analysis and infrared thermography. International Journal of Heat and Mass Transfer 100: 65-78
Norouzi, M.; Sheykhian, M.K.; Shahmardan, M.M.; Shahbani-Zahiri, A. 2021: Experimental investigation of spreading and receding behaviors of Newtonian and viscoelastic droplet impacts on inclined dry surfaces. Meccanica 56(1): 125-145
Pandya, Y.; Parey, A. 2013: Experimental investigation of spur gear tooth mesh stiffness in the presence of crack using photoelasticity technique. Engineering Failure Analysis 34: 488-500
Yamaguti, T.; Watanabe, Y. 1980: Experimental investigation of sputtering mechanism. Journal of Crystal Growth 48(1): 1-8
He, K.; Chen, Y.; Han, S. 2019: Experimental investigation of square stainless steel tubular stub columns after elevated temperatures. Journal of Constructional Steel Research 159: 397-414
Ranjbar, S.; Masoumi, H.; Haghighi Khoshkhoo, R.; Mirfendereski, M. 2019: Experimental investigation of stability and thermal conductivity of phase change materials containing pristine and functionalized multi-walled carbon nanotubes. Journal of Thermal Analysis and Calorimetry 140(5): 2505-2518
Li, W.; Zou, C. 2018: Experimental investigation of stability and thermo-physical properties of functionalized β-CD-Ti O2-Ag nanofluids for antifreeze. Powder Technology 340: 290-298
Shanbedi, M.; Zeinali Heris, S.; Maskooki, A. 2015: Experimental investigation of stability and thermophysical properties of carbon nanotubes suspension in the presence of different surfactants. Journal of Thermal Analysis and Calorimetry 120(2): 1193-1201
Hayakawa, A.; Arakawa, Y.; Mimoto, R.; Somarathne, K.K.A.; Kudo, T.; Kobayashi, H. 2017: Experimental investigation of stabilization and emission characteristics of ammonia/air premixed flames in a swirl combustor. International Journal of Hydrogen Energy 42(19): 14010-14018
Toge, T.D.; Pradeep, A. 2017: Experimental investigation of stall inception of a low speed contra rotating axial flow fan under circumferential distorted flow condition. Aerospace Science and Technology 70: 534-548
Lin, J.; Wu, J.; Zhang, Z.; Chen, Z.; Xie, J.; Lu, J. 2017: Experimental investigation of startup characteristics of R290 rotary compressor under low ambient temperature heating condition. International Journal of Refrigeration 77: 128-135
Zhu, Y.; Fang, Y.; Su, L.; Ye, F. 2020: Experimental investigation of start‐up and transient thermal performance of pumped two‐phase battery thermal management system. International Journal of Energy Research 44(14): 11372-11384
Zhang, H.; Fléchard, X.; Cassimi, A.; Adoui, L.; Frémont, F.; Lecler, D.; Cremer, G.; Guillaume, L.; Lelievre, D.; Lepoutre, A.; Hennecart, D. 1999: Experimental investigation of state-selective single and double electron capture in slow C5+−Hecollisions. Physical Review A 60(5): 3694-3701
Jin, C.; Sun, Y.; Zheng, Y.; Yang, X.; Lai, X.; Gu, H.; Feng, X. 2020: Experimental investigation of state‐of‐power measurement for lithium‐ion batteries. International Journal of Energy Research 45(5): 7549-7560
Salma, I.; Zemplén-Papp, . 1992: Experimental investigation of statistical models describing distribution of counts. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment 312(3): 591-597
Bakhshayesh Eghbali, N.; Mirghaderi, S.R. 2017: Experimental investigation of steel beam to RC column connection via a through-plate. Journal of Constructional Steel Research 133: 125-140
Purba, R.; Bruneau, M. 2015: Experimental investigation of steel plate shear walls with in-span plastification along horizontal boundary elements. Engineering Structures 97: 68-79
Liu, T.; Wang, S.; Xu, Y. 2019: Experimental investigation of stepped short tube orifice as expansion device in domestic air conditioning/heat pump system. Energy and Buildings 193: 240-249
Tarhini, K.M.; Frederick, G.R. 1987: Experimental investigation of stiffened tubular joints. Experimental Mechanics 27(1): 86-93
Bigo, S.; Gauchard, S.; Bertaina, A.; Hamaide, J. 1999: Experimental investigation of stimulated Raman scattering limitation on WDM transmission over various types of fiber infrastructures. IEEE Photonics Technology Letters 11(6): 671-673
Slegers, N.; Brown, A.; Rogers, J. 2015: Experimental investigation of stochastic parafoil guidance using a graphics processing unit. Control Engineering Practice 36: 27-38
Barbay, S.; Giacomelli, G.; Lepri, S.; Marin, F.; Rabbiosi, I.; Zavatta, A. 2003: Experimental investigation of stochastic processes in vertical-cavity lasers. Physica A: Statistical Mechanics and its Applications 327(1-2): 120-123
Alley Jr., V.L.; Faison, R.W. 1972: Experimental investigation of strains in fabric under biaxial and shear forces. Journal of Aircraft 9(1): 55-60
Hara, S.; Tsukahara, T.; Kawaguchi, Y. 2017: Experimental investigation of streamwise velocity fluctuation based on the Reynolds-number dependency in turbulent viscoelastic-fluid flow. International Journal of Heat and Fluid Flow 68: 281-289
Dhanesh, S.; Kumar, K S.; Maruthur, P.; Rejumon, R.; Usmansha, G S. 2021: Experimental investigation of strength of Aramid kelvar and chopped carbon reinforced concrete beam. Materials Today: Proceedings 45: 1269-1273
Neustroev, V.; Ostrovsky, Z.; Shamardin, V. 2004: Experimental investigation of stress effect on swelling and microstructure of Fe–16Cr–15Ni–3Mo–Nb austenitic stainless steel under low-temperature irradiation up to high damage dose in the BOR-60 reactor. Journal of Nuclear Materials 329-333: 612-616
Wang, B.; Uji, K.; Wu, T.; Dai, H.; Yan, D.; Guo, R. 2019: Experimental investigation of stress transfer and failure mechanism between existing concrete and CFRP grid-sprayed PCM. Construction and Building Materials 215: 43-58
Inge, J.E.; Swanson, J.E. 1962: Experimental investigation of stresses in a ceramic-to-metal brazed joint. Experimental Mechanics 2(10): 289-295
Saeed, H.Z.; Khan, Q.u.Z.; Khan, H.A.; Farooq, R. 2016: Experimental investigation of stress–strain behavior of CFRP confined Low Strength Concrete (LSC) cylinders. Construction and Building Materials 104: 208-215
Hino, R.; Kuzukawa, T.; Yoshida, F. 2017: Experimental investigation of stretch flangeability of high-strength steel sheets by means of in-plane stretch bending. Procedia Engineering 207: 1928-1933
Gabuchian, V.; Rosakis, A.J.; Lapusta, N.; Oglesby, D.D. 2014: Experimental investigation of strong ground motion due to thrust fault earthquakes. Journal of Geophysical Research: Solid Earth 119(2): 1316-1336
Sharma, L.; Chhibber, R. 2020: Experimental investigation of structural integrity behavior of High strength low alloy steel – Study of mechanical, microstructural and corrosion behavior of Submerged arc welding weldments. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 235(2): 266-273
Cléon, G.; Honoré, D.; Lacour, C.; Cessou, A. 2015: Experimental investigation of structure and stabilization of spray oxyfuel flames diluted by carbon dioxide. Proceedings of the Combustion Institute 35(3): 3565-3572
Bernatz, G.; Nau, S.; Rettig, R.; Jänsch, H.; Stolz, W. 1999: Experimental investigation of structures of interior interfaces in Ga as. Journal of Applied Physics 86(12): 6752-6757
Yen, N. 1975: Experimental investigation of subharmonic generation in an acoustic interferometer. Journal of the Acoustical Society of America 57(6): 1357-1362
McClaine, A.W.; Swallom, D.W.; Kessler, R. 1985: Experimental investigation of subsonic combustion-driven MHD generator performance. Journal of Propulsion and Power 1(4): 263-269
Seetharam, H.; Wentz Jr., W. 1977: Experimental investigation of subsonic turbulent separated boundary layers on an airfoil. Journal of Aircraft 14(1): 51-55
Thermou, G.E.; Katakalos, K.; Manos, G. 2018: Experimental investigation of substandard RC columns confined with SRG jackets under compression. Composite Structures 184: 56-65
Wang, H.; Hou, J.; Wang, J.; Zhu, B.; Zhang, Y. 2018: Experimental investigation of subsurface damage depth of lapped optics by fluorescent method. Journal of Central South University 25(7): 1678-1689
Jiang, C.; Xu, J.; Wang, C. 2016: Experimental investigation of subsurface damage of optical glass in precision grinding using a brittle material removal fraction. International Journal of Advanced Manufacturing Technology 90(1-4): 725-730
Tefera Chekol, E.; Paramasivam, V.; Gardie, E.; Dubale, H.; Selvaraj, S.K. 2021: Experimental investigation of suitable thin layer drying curve to solar maize dryer assisted for biomass back-up heater. Materials Today: Proceedings 46: 7389-7395
Zhang, J.; Zheng, C.; Zhang, Y.; Xu, Z.; Wang, L.; Li, C.; Gao, X. 2016: Experimental investigation of sulfite oxidation enhancement in a micro-pore aeration system. RSC Advances 6(106): 104139-104147
Wei, Q.S.; Zhang, X.; Kim, B.; Oh, B.S. 2022: Experimental investigation of supercapacitor based regenerative energy storage for a fuel cell vehicle equipped with an alternator. International Journal of Hydrogen Energy 47(3): 1954-1964
Garoche, P.; Veyssié, J.; Manuel, P.; Molinié, P. 1976: Experimental investigation of superconductivity in 2H-Nb Se2 single crystal. Solid State Communications 19(5): 455-460
Zhou, G.; Feng, G.; Zhou, H.; Deng, G.; Zhang, Y.; Ma, Z. 2011: Experimental investigation of supercontinuum generated from microfiber loop wound on Al-coated silica rod. Optics Communications 284(19): 4769-4772
Jajja, S.A.; Zada, K.R.; Fronk, B.M. 2019: Experimental investigation of supercritical carbon dioxide in horizontal microchannels with non-uniform heat flux boundary conditions. International Journal of Heat and Mass Transfer 130: 304-319
Sathiyamoorthy, K.; Danish, T.H.; Srinivas, J.; Manjunath, P. 2018: Experimental investigation of supersonic combustion in a strut-cavity based combustor. Acta Astronautica 148: 285-293
Lewis, J.E.; Kubota, T.; Lees, L. 1968: Experimental investigation of supersonic laminar, two-dimensional boundary-layer separation in a compression corner with and without cooling. AIAA Journal 6(1): 7-14
Gang, D.; Yi, S.; Niu, H. 2021: Experimental investigation of supersonic turbulent flow over cylinders with various heights. Journal of Visualization 24(3): 461-470
Dogrusadik, A.; Kentli, A. 2019: Experimental investigation of support plates' influences on tool wear in micro-drilling of CFRP laminates. Journal of Manufacturing Processes 38: 214-222
Wang, J.; Hu, H.; Ye, A.; Chen, J.; Zhang, P. 2016: Experimental investigation of surface acoustic wave atomization. Sensors and Actuators A: Physical 238: 1-7
Su, G.; Wang, Y.; Guo, B.; Song, B.; Mu, H.; Zhang, G. 2017: Experimental investigation of surface charge accumulation behaviors on PTFE insulator under DC and impulse voltage in vacuum. IEEE Transactions on Dielectrics and Electrical Insulation 24(6): 3347-3356
Prakash, S. 2019: Experimental investigation of surface defects in low‐power CO 2 laser engraving of glass fiber‐reinforced polymer composite. Polymer Composites 40(12): 4704-4715
Bian, D.; Wu, Y. 2018: Experimental investigation of surface dielectric barrier discharge plasma actuator based on fluorinated polyimide. Sensors and Actuators A: Physical 276: 320-327
Yan, P.; Shao, T.; Wang, J.; Gao, W.; Yuan, W.; Pan, R.; Zhang, S.; Sun, G. 2007: Experimental investigation of surface flashover in vacuum using nanosecond pulses. IEEE Transactions on Dielectrics and Electrical Insulation 14(3): 634-642
Cheng, X.; Liu, J.; Hong, Z.; Qian, B. 2012: Experimental investigation of surface flashover of PMMA, HDPE and PA in vacuum using 180 nanosecond quasi-square pulses. IEEE Transactions on Dielectrics and Electrical Insulation 19(4): 1440-1447
Zakinyan, A.; Mkrtchyan, L.; Dikansky, Y. 2016: Experimental investigation of surface instability of a thin layer of a magnetic fluid. European Journal of Mechanics - B/Fluids 56: 172-177
Kannan, S.; Kui, L. 2019: Experimental investigation of surface integrity during abrasive edge profiling of nickel-based alloy. Journal of Manufacturing Processes 39: 40-51
Tang, L.; Gao, C.; Huang, J.; Shen, H.; Lin, X. 2014: Experimental investigation of surface integrity in finish dry hard turning of hardened tool steel at different hardness levels. International Journal of Advanced Manufacturing Technology 77(9-12): 1655-1669
Mao, C.; Tang, X.; Zou, H.; Zhou, Z.; Yin, W. 2011: Experimental investigation of surface quality for minimum quantity oil–water lubrication grinding. International Journal of Advanced Manufacturing Technology 59(1-4): 93-100
Kataria, R.; Kumar, J.; S. Pabla, B. 2016: Experimental investigation of surface quality in ultrasonic machining of WC-Co composites through Taguchi method. AIMS Materials Science 3(3): 1222-1235
Jadeja, N.N.; Patel, D.M. 2021: Experimental investigation of surface roughness and cutting force during machining of SS43100 by using coated and uncoated carbide inserts. Materials Today: Proceedings 47: 3129-3136
Zhao, Y.; Fang, J.; Wang, Y.; Shen, Y.; Yao, J.; Wang, C. 2019: Experimental investigation of surface roughness effect on electrostatics generation. Powder Technology 357: 33-45
Dias, F.M.; Tatarova, E.; Henriques, J.; Ferreira, C.M. 1999: Experimental investigation of surface wave propagation in collisional plasma columns. Journal of Applied Physics 85(5): 2528-2533
Sun, H.; Lin, G.; Jin, H.; Bu, X.; Cai, C.; Jia, Q.; Ma, K.; Wen, D. 2021: Experimental investigation of surface wettability induced anti-icing characteristics in an ice wind tunnel. Renewable Energy 179: 1179-1190
Liu, J.; Sheng, J.J. 2019: Experimental investigation of surfactant enhanced spontaneous imbibition in Chinese shale oil reservoirs using NMR tests. Journal of Industrial and Engineering Chemistry 72: 414-422
Kini, G.; Chandrasekaran, S.; Hughes, M.T.; Garimella, S. 2021: Experimental investigation of surfactant-enhanced ammonia-water absorption in a shell-and-tube absorber. International Journal of Refrigeration 129: 43-51
Sabahi, N.; Razfar, M.R.; Hajian, M. 2017: Experimental investigation of surfactant-mixed electrolyte into electrochemical discharge machining (ECDM) process. Journal of Materials Processing Technology 250: 190-202
Pu, W.; Jiang, R.; Pang, S.; Qiu, T.; Sun, Z.; Shen, C.; Wei, P. 2019: Experimental investigation of surfactant-stabilized foam stability in the presence of light oil. Journal of Dispersion Science and Technology 41(11): 1596-1606
Gajendra Rajan, R.; Sakthieswaran, N.; Ganesh Babu, O. 2021: Experimental investigation of sustainable concrete by partial replacement of fine aggregate with treated waste tyre rubber by acidic nature. Materials Today: Proceedings 37: 1019-1022
Ziraksaz, M.H.; Ommi, F.; Gandji, D.D.; Ashjaee, M. 2014: Experimental investigation of swirl atomizer spray defections. Meccanica 49(12): 2747-2755
Hemmat Esfe, M.; Sarlak, M.R. 2017: Experimental investigation of switchable behavior of Cu O-MWCNT (85%–15%)/10W-40 hybrid nano-lubricants for applications in internal combustion engines. Journal of Molecular Liquids 242: 326-335
Huang, S.; Lin, H.; Chao, K. 1987: Experimental investigation of synthesis gas solubility in fischer-tropsch reactor slurry. Fluid Phase Equilibria 36: 141-148
Faraday, M. 1853: Experimental investigation of table-moving. Journal of the Franklin Institute 56(5): 328-333
Faraday, M. 1838: Experimental investigation of table-moving ply. Journal of the Franklin Institute 26(5): 328-333
Diakhaté, M.; Millien, A.; Petit, C.; Phelipot-Mardelé, A.; Pouteau, B. 2011: Experimental investigation of tack coat fatigue performance: Towards an improved lifetime assessment of pavement structure interfaces. Construction and Building Materials 25(2): 1123-1133
Cummings, R.M.; Schiff, L.B.; Duino, J.D. 1995: Experimental investigation of tangential slot blowing on a generic chined forebody. Journal of Aircraft 32(4): 818-824
de Freitas, S.A.; Vieira, J.T.; Filho, S.L.M.R.; Brandão, L.C. 2019: Experimental investigation of tapping in CFRP with analysis of torque-tension resistance. International Journal of Advanced Manufacturing Technology 104(1-4): 757-766
Zhang, Z.; Pang, S. 2019: Experimental investigation of tar formation and producer gas composition in biomass steam gasification in a 100 k W dual fluidised bed gasifier. Renewable Energy 132: 416-424
Chen, H.; Li, T.; Xing, K.; Li, K.; Zhang, M.; Li, Q. 2017: Experimental investigation of technological conditions and temperature distribution in rubber material during microwave vulcanization process. Journal of Thermal Analysis and Calorimetry 130(3): 2079-2091
Jan, M.T.; Ahmad, F.; Hamid, N.H.B.; Khir, M.H.B.M.; Shoaib, M.; Ashraf, K. 2016: Experimental investigation of temperature and relative humidity effects on resonance frequency and quality factor of CMOS-MEMS paddle resonator. Microelectronics Reliability 63: 82-89
Sugihara, S.; Iwai, H. 2020: Experimental investigation of temperature distribution of planar solid oxide fuel cell: Effects of gas flow, power generation, and direct internal reforming. International Journal of Hydrogen Energy 45(46): 25227-25239
Rehman, S.; Alhems, L.; Jadim, R.; Al Faraj, B.A.; Al Mutairi, K.S.; Al-Yemni, A.K. 2017: Experimental investigation of temperature effect on corrosive sulfur formation in transformers. IEEE Transactions on Dielectrics and Electrical Insulation 24(5): 3201-3206
Zheng, Z.; Wang, L.; Wei, T.; Cai, W.; Li, H.; Yao, L.; Li, F. 2021: Experimental investigation of temperature effect on hydrodynamic characteristics of natural cavitation in rotational supercavitating evaporator for desalination. Renewable Energy 174: 278-292
Nguyen, Q.; Azadkhou, A.; Akbari, M.; Panjehpour, A.; Karimipour, A. 2020: Experimental investigation of temperature field and fusion zone microstructure in dissimilar pulsed laser welding of austenitic stainless steel and copper. Journal of Manufacturing Processes 56: 206-215
Miku, O. 1981: Experimental investigation of temperature fields and multiple steady states in deactivated fixed-bed reactors. Journal of Catalysis 69(1): 140-146
Kannan, V.S.; Arjunan, T.V.; Vijayan, S. 2020: Experimental investigation of temperature swing adsorption system for air dehumidification. Heat and Mass Transfer 56(7): 2093-2105
Lohse, E.; Schmitz, G. 2013: Experimental investigation of temporary electronics cooling with regularly structured composite latent heat storage. HVAC&R Research 19(7): 814-822
Carozzi, F.G.; Bellini, A.; D'Antino, T.; de Felice, G.; Focacci, F.; Hojdys, .; Laghi, L.; Lanoye, E.; Micelli, F.; Panizza, M.; Poggi, C. 2017: Experimental investigation of tensile and bond properties of Carbon-FRCM composites for strengthening masonry elements. Composites Part B: Engineering 128: 100-119
Devasenapathi, V.; Monish, P.; Balasivanandha Prabu, S. 2009: Experimental investigation of tensile creep behavior of polymer nanocomposites. International Journal of Advanced Manufacturing Technology 44(3-4): 412-418
Mesticou, Z.; Bui, L.; Junes, A.; Si Larbi, A. 2017: Experimental investigation of tensile fatigue behaviour of Textile-Reinforced Concrete (TRC): Effect of fatigue load and strain rate. Composite Structures 160: 1136-1146
Salari, M.; Joodaki, M.; Mehregan, S. 2018: Experimental investigation of tensile mechanical strain influence on the dark current of organic solar cells. Organic Electronics 54: 192-196
El-Aty, A.A.; Xu, Y.; Zhang, S.; Ma, Y.; Chen, D. 2017: Experimental investigation of tensile properties and anisotropy of 1420, 8090 and 2060 Al-Li alloys sheet undergoing different strain rates and fibre orientation: a comparative study. Procedia Engineering 207: 13-18
Adibeig, M.R.; Hassanifard, S.; Vakili-Tahami, F.; Hattel, J.H. 2018: Experimental investigation of tensile strength of friction stir welded butt joints on PMMA. Materials Today Communications 17: 238-245
Li, Y.; Shi, Z.; Lin, J.; Yang, Y.; Huang, B.; Chung, T.; Yang, J. 2016: Experimental investigation of tension and compression creep-ageing behaviour of AA2050 with different initial tempers. Materials Science and Engineering: A657: 299-308
Sajben, M.; Doriovan, J.F.; Morris, M.J. 1992: Experimental investigation of terminal shock sensors for mixed-compression inlets. Journal of Propulsion and Power 8(1): 168-174
Azizi, Z. 2017: Experimental investigation of terminal velocity and Sherwood number of rising droplet in an extraction column. Heat and Mass Transfer 53(10): 3027-3035
Kothai, A.; Sathishkumar, C.; Muthupriya, R.; sankar, K.S.; Dharchana, R. 2021: Experimental investigation of textile dyeing wastewater treatment using aluminium in electro coagulation process and Fenton's reagent in advanced oxidation process. Materials Today: Proceedings 45: 1411-1416
Al-Gemeel, A.N.; Zhuge, Y. 2018: Experimental investigation of textile reinforced engineered cementitious composite (ECC) for square concrete column confinement. Construction and Building Materials 174: 594-602
Deineko, A.; Malakhov, I.; Storyzko, V.; Ustimenkov, K.; Schliakhov, N.; Hategan, C. 1979: Experimental investigation of the 30Si(, p)31Si reaction anomaly with low-energy polarized deuterons. Physics Letters B 87(1-2): 32-34
Kergourlay, G.; Kouidri, S.; Rankin, G.W.; Rey, R. 2006: Experimental investigation of the 3D unsteady flow field downstream of axial fans. Flow Measurement and Instrumentation 17(5): 303-314
Arends, J.; Eyink, J.; Hegerath, T.; Hartmann, H.; Mecking, B.; Nöldeke, G.; Rost, H. 1976: Experimental investigation of the 4He(γ, d)d reaction. Physics Letters B 62(4): 411-412
Arends, J.; Eyink, J.; Hegerath, A.; Hartmann, H.; Mecking, B.; Nöldeke, G.; Rost, H. 1979: Experimental investigation of the 4He(γ, p)3H reaction in the Δ -resonance region. Nuclear Physics A 322(2-3): 253-266
Szczepkowski, J.; Grochola, A.; Jastrzebski, W.; Kowalczyk, P. 2014: Experimental investigation of the 6 1 Σ + 'shelf' state of KCs. Chemical Physics Letters 614: 36-40
Je¸drzejewski-Szmek, Z.; Łubiński, D.; Kowalczyk, P.; Jastrzebski, W. 2008: Experimental investigation of the 61Π and 71Π electronic states of KLi. Chemical Physics Letters 458(1-3): 64-66
Jeppesen, H.; Ames, F.; Bergmann, U.; Borge, M.; Cederkäll, J.; Emhofer, S.; Fraile, L.; Fynbo, H.; Henry, S.; Johansson, H.; Jonson, B.; Meister, M.; Nilsson, T.; Nyman, G.; Pantea, M.; Riisager, K.; Richter, A.; Rudolph, K.; Schrieder, G.; Siebert, T.; Tengblad, O.; Tengborn, E.; Turrión, M.; von Hahn, R.; Wenander, F.; Wolf, B. 2004: Experimental investigation of the 9Li+d reaction at REX-ISOLDE. Nuclear Physics A 738: 511-514
Bajenova, I.; Fartushna, I.; Khvan, A.; Cheverikin, V.; Marusich, C.; Hallstedt, B. 2017: Experimental investigation of the Al-Mn-C system. Part II: Liquidus and solidus projections. Journal of Alloys and Compounds 695: 3445-3456
Bajenova, I.; Fartushna, I.; Khvan, A.; Cheverikin, V.; Ivanov, D.; Hallstedt, B. 2017: Experimental investigation of the Al-Mn-C system: Part I. Phase equilibria at 1200 and 1100 °C. Journal of Alloys and Compounds 700: 238-246
Tang, C.; Du, Y.; Xu, H.; Xiong, W.; Zhang, L.; Zheng, F.; Zhou, H. 2008: Experimental investigation of the Al–Ce–Ni system at 800°C. Intermetallics 16(3): 432-439
Fariñas Alvariño, P.; Sánchez Simón, M.L.; dos Santos Guzella, M.; Amado Paz, J.M.; Sáiz Jabardo, J.M.; Cabezas Gómez, L. 2019: Experimental investigation of the CHF of HFE-7100 under pool boiling conditions on differently roughened surfaces. International Journal of Heat and Mass Transfer 139: 269-279
Shibata, K.; Sakumi, A.; Sato, R.; Tsubuku, K.; Nishimoto, T.; Hasegawa, J.; Ogawa, M.; Oguri, Y. 2001: Experimental investigation of the Coulomb logarithm in beam–plasma interaction. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment 464(1-3): 225-230
Diao, Y.; Liu, Y.; Wang, R.; Zhao, Y.; Guo, L. 2014: Experimental investigation of the Cu/R141b nanofluids on the evaporation/boiling heat transfer characteristics for surface with capillary micro-channels. Heat and Mass Transfer 50(9): 1261-1274
Klotz, U.E.; Liu, C.; Uggowitzer, P.J.; Löffler, J.F. 2007: Experimental investigation of the Cu–Ti–Zr system at 800°C. Intermetallics 15(12): 1666-1671
Kalfaoğlu, E.; Karabulut, B. 2016: Experimental investigation of the EPR parameters and molecular orbital bonding coefficients for VO2+ ion in Na H2PO4·2H2O single crystals. Physica B: Condensed Matter 497: 19-22
Konar, B.; Hudon, P.; Jung, I. 2017: Experimental investigation of the Li Al Si2 O6 -Mg Si O3 and Li Al Si2 O6 -Ca Mg Si2 O6 isopleths at 1 atm. Journal of the American Ceramic Society 100(7): 3269-3282
Jáger, B.; Dunai, L.; Kövesdi, B. 2017: Experimental investigation of the M-V-F interaction behavior of girders with trapezoidally corrugated web. Engineering Structures 133: 49-58
Zhang, X.; Zhang, Y.; Kevorkov, D.; Medraj, M. 2016: Experimental investigation of the Mg Zn Zr ternary system at 450 °C. Journal of Alloys and Compounds 680: 212-225
Su, H.; Harmelin, M.; Donnadieu, P.; Baetzner, C.; Seifert, H.; Lukas, H.; Effenberg, G.; Aldinger, F. 1997: Experimental investigation of the Mg-Al phase diagram from 47 to 63 at.% Al. Journal of Alloys and Compounds 247(1-2): 57-65
Cardinale, A.M.; Macciò, D.; Delfino, S.; Saccone, A. 2010: Experimental investigation of the Nd–Al–Si system. Journal of Thermal Analysis and Calorimetry 103(1): 103-109
Windholz, L.; Schuh, B.; Neger, T. 1996: Experimental investigation of the Stark effect of the level groups 7p, 6p' and 6d of neutral xenon. Physica Scripta 54(1): 85-90
Lo, W.; Cardwell, D.A.; Chow, J.C.L.; Leung, H. 1998: Experimental investigation of the Y2Ba Cu O5 surface free energy during peritectic solidification of YBCO. Journal of Materials Research 13(8): 2035-2038
Sverdlov, E.D. 1979: Experimental investigation of the acoustical characteristics of a diffusion flare of hydrogen. Combustion, Explosion, and Shock Waves 15(2): 138-143
Joulaei, M.; Kolahdoozan, M.; Salehi, M.; Zadsar, M.; Vahabi, M. 2018: Experimental investigation of the adhesion force of single and double-layer coatings on MEMS surfaces. Surface and Interface Analysis 51(4): 419-426
Peerlings, L.; Boij, S.; Bodén, H. 2019: Experimental investigation of the aero-acoustic interaction at an area-expansion. Journal of Sound and Vibration 457: 197-211
Jeyalingam, J.; Jabbal, M. 2018: Experimental investigation of the aeroacoustics of synthetic jet actuators in quiescent conditions. Sensors and Actuators A: Physical 280: 52-60
Tschepe, J.; Maaß, J.; Nayeri, C.N.; Paschereit, C.O. 2019: Experimental investigation of the aerodynamic drag of roof-mounted insulators for trains. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit 234(8): 834-846
Iliadis, P.; Soper, D.; Baker, C.; Hemida, H. 2018: Experimental investigation of the aerodynamics of a freight train passing through a tunnel using a moving model. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit 233(8): 857-868
Haury, G.; Jordan, S.; Hofmann, C. 1978: Experimental investigation of the aerosol-catalyzed oxidation of SO2 under atmospheric conditions. Atmospheric Environment (1967) 12(1-3): 281-287
Langbein, K. 1996: Experimental investigation of the afterglow of the pulsed electron cyclotron resonance discharge. Review of Scientific Instruments 67(3): 1334-1336
Edelin, D.; Bariteau, N.; Etourneau, Y.; Traonvouez, L.; Soto, J. 2019: Experimental investigation of the air side fouling of finned tube heat exchangers. Heat and Mass Transfer 55(10): 2713-2722
Benabed, A.; Limam, K.; Janssens, B.; Bosschaerts, W.; Vercauteren, J. 2020: Experimental investigation of the airflow generated by the human foot tapping using the hot-wire anemometry. Journal of Building Physics 44(2): 121-136
Both, B.; Szánthó, Z.; Goda, R. 2017: Experimental investigation of the airflow homogeneity in a tangential air-distribution system. Science and Technology for the Built Environment 24(3): 316-324
Baeri, P.; Campisano, S.U.; Grimaldi, M.G.; Rimini, E. 1982: Experimental investigation of the amorphous silicon melting temperature by fast heating processes. Journal of Applied Physics 53(12): 8730-8733
Fletcher, R. 1983: Experimental investigation of the amplitudes of the quantum oscillations in the transport coefficients of Al. Physical Review B 28(4): 1721-1726
Voishvillo, N.A. 1981: Experimental investigation of the angular and spectral characteristics of the radiation emergent from a layer of variable optical thickness of a coherently scattering medium. Journal of Applied Spectroscopy 34(1): 124-128
Xu, G.; He, C.; Su, A.; Chen, Z. 2018: Experimental investigation of the anisotropic mechanical behavior of phyllite under triaxial compression. International Journal of Rock Mechanics and Mining Sciences 104: 100-112
Huang, K.; Yang, W.; Gao, Y.; Ye, X. 2019: Experimental investigation of the application of parameter inversion for residual stress adjustment in five-axis milling using an annular cutter. International Journal of Advanced Manufacturing Technology 105(7-8): 3233-3247
Taheri-Shakib, J.; Shekarifard, A.; Naderi, H. 2018: Experimental investigation of the asphaltene deposition in porous media: Accounting for the microwave and ultrasonic effects. Journal of Petroleum Science and Engineering 163: 453-462
Mirzaei, M. 2017: Experimental investigation of the assessment of Al2O3–H2O and Cu O–H2O nanofluids in a solar water heating system. Journal of Energy Storage 14: 71-81
Korolov, I.; Bánó, G.; Donkó, Z. 2011: Experimental investigation of the asymmetric charge exchange reaction in the Ar+–Ni system in the afterglow of a pulsed glow discharge. Spectrochimica Acta Part B: Atomic Spectroscopy 66(9-10): 706-711
Lawler, J.; Parker, J.; Anderson, L.; Fitzsimmons, W. 1979: Experimental investigation of the atomic fluorine laser. IEEE Journal of Quantum Electronics 15(7): 609-613
Arndt, C.M.; Papageorge, M.J.; Fuest, F.; Sutton, J.A.; Meier, W. 2019: Experimental investigation of the auto-ignition of a transient propane Jet-in-Hot-Coflow. Proceedings of the Combustion Institute 37(2): 2117-2124
Rutovskii, V.B.; Kulyapin, A.N.; Zhdanov, A.D. 1989: Experimental investigation of the autoignition process during fuel injection into a heated air flow. Combustion, Explosion, and Shock Waves 25(1): 7-9
Schmid, F.; Spindler, K. 2016: Experimental investigation of the auxiliary gas circuit of a diffusion absorption chiller with natural and forced circulation. International Journal of Refrigeration 70: 84-92
Xiao, Y.; Cao, H.; Luo, G. 2019: Experimental investigation of the backward erosion mechanism near the pipe tip. Acta Geotechnica 14(3): 767-781
Yang, H.; Song, H.; Zhang, S. 2015: Experimental investigation of the behavior of aramid fiber reinforced polymer confined concrete subjected to high strain-rate compression. Construction and Building Materials 95: 143-151
Chen, Y.; Gao, Y.; Chen, L.; Wang, X.; Liu, K.; Sun, B. 2019: Experimental investigation of the behavior of methane gas hydrates during depressurization-assisted CO2 replacement. Journal of Natural Gas Science and Engineering 61: 284-292
Goldston, M.; Remennikov, A.; Sheikh, M.N. 2016: Experimental investigation of the behaviour of concrete beams reinforced with GFRP bars under static and impact loading. Engineering Structures 113: 220-232
Yu, H.; Burgess, I.; Davison, J.; Plank, R. 2009: Experimental investigation of the behaviour of fin plate connections in fire. Journal of Constructional Steel Research 65(3): 723-736
Hao, Y.; Hao, H.; Chen, G. 2014: Experimental investigation of the behaviour of spiral steel fibre reinforced concrete beams subjected to drop-weight impact loads. Materials and Structures 49(1-2): 353-370
Khanna, S.; Sharma, V.; Kedare, S.B.; Singh, S. 2016: Experimental investigation of the bending of absorber tube of solar parabolic trough concentrator and comparison with analytical results. Solar Energy 125: 1-11
Su, L.; Zhang, W.; Chen, X.; Wang, T. 2015: Experimental investigation of the biaxial strength of thermal barrier coating system. Ceramics International 41(7): 8945-8955
Gu, W.; Li, S.; Liu, X.; Chen, Z.; Zhang, X.; Ma, T. 2021: Experimental investigation of the bifacial photovoltaic module under real conditions. Renewable Energy 173: 1111-1122
Peng, H.; Hao, H.; Zhang, J.; Liu, Y.; Cai, C. 2015: Experimental investigation of the bond behavior of the interface between near-surface-mounted CFRP strips and concrete. Construction and Building Materials 96: 11-19
Panat, R.; Hsia, K.J. 2004: Experimental investigation of the bond-coat rumpling instability under isothermal and cyclic thermal histories in thermal barrier systems. Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences 460: 1957-1979
Morton, J.B.; Jacobson, I.D.; Saunders, S. 1976: Experimental investigation of the boundary layer on a rotating cylinder. AIAA Journal 14(10): 1458-1463
Hashemi, N.; Ein-Mozaffari, F.; Upreti, S.R.; Hwang, D.K. 2016: Experimental investigation of the bubble behavior in an aerated coaxial mixing vessel through electrical resistance tomography (ERT). Chemical Engineering Journal 289: 402-412
Yin, J.; Ma, Y.; Qian, Y.; Wang, D. 2016: Experimental investigation of the bubble separation route for an axial gas–liquid separator for TMSR. Annals of Nuclear Energy 97: 1-6
Vervloet, J.; Van Itterbeeck, P.; Verbruggen, S.; El Kadi, M.; De Munck, M.; Wastiels, J.; Tysmans, T. 2019: Experimental investigation of the buckling behaviour of Textile Reinforced Cement sandwich panels with varying face thickness using Digital Image Correlation. Construction and Building Materials 194: 24-31
Homewood, R.H.; Brine, A.C.; Johnson Jr., A.E. 1961: Experimental investigation of the buckling instability of monocoque shells. Experimental Mechanics 1(3): 88-96
Yamada, S.; Uchiyama, K.; Yamada, M. 1983: Experimental investigation of the buckling of shallow spherical shells. International Journal of Non-Linear Mechanics 18(1): 37-54
Bliss, D.B.; Burke, S.E. 1982: Experimental investigation of the bulk reaction boundary condition. Journal of the Acoustical Society of America 71(3): 546-551
Zheng, X.; Fenghai Liu; Kloch, A. 2000: Experimental investigation of the cascadability of a cross-gain modulation wavelength converter. IEEE Photonics Technology Letters 12(3): 272-274
Chen, J.; Li, G.; Zhang, T.; Wang, M.; Yu, Y. 2016: Experimental investigation of the catalytic decomposition and combustion characteristics of a non-toxic ammonium dinitramide (ADN)-based monopropellant thruster. Acta Astronautica 129: 367-373
Kobylkin, I.F.; Nosenko, N.I.; Solov'ev, V.S. 1992: Experimental investigation of the change of the shockwave sensitivity of explosives due to weak precursor waves. Combustion, Explosion, and Shock Waves 28(6): 636-639
Verzilov, V.A.; Vnukov, I.E.; Zarubin, V.V.; Kalinin, B.N.; Naumenko, G.A.; Potylitsyn, A.P. 1997: Experimental investigation of the characteristic features of bremsstrahlung from high-energy electrons in thin amorphous targets. Journal of Experimental and Theoretical Physics Letters 65(5): 381-385
Liu, H.; Xiao, J.; Wang, P.; Liu, G.; Gao, M.; Li, S. 2018: Experimental investigation of the characteristics of a granular ballast bed under cyclic longitudinal loading. Construction and Building Materials 163: 214-224
Zegenhagen, M.; Ziegler, F. 2015: Experimental investigation of the characteristics of a jet-ejector and a jet-ejector cooling system operating with R134a as a refrigerant. International Journal of Refrigeration 56: 173-185
Konkin, S V.; Krivitskii, A M.; Rebone, V. K.; Rotinyan, M. A.; Fedorov, I. A. 1996: Experimental investigation of the characteristics of a supersonic cw chemical chain-reaction DF- CO2laser. Quantum Electronics 26(7): 585-589
Li, Y.; Wang, Q.; Chen, S.; Zhao, B.; Dai, Y. 2014: Experimental investigation of the characteristics of cryogenic oscillating heat pipe. International Journal of Heat and Mass Transfer 79: 713-719
Kleinow, P.; Rutz, F.; Aidam, R.; Bronner, W.; Heussen, H.; Walther, M. 2015: Experimental investigation of the charge-layer doping level in in Ga As/in Al as avalanche photodiodes. Infrared Physics-Technology 71: 298-302
Rezasoltani, A.; Khonsari, M. 2019: Experimental investigation of the chemical degradation of lubricating grease from an energy point of view. Tribology International 137: 289-302
Bonnier, M.; Eiff, O. 2002: Experimental investigation of the collapse of a turbulent wake in a stably stratified fluid. Physics of Fluids 14(2): 791-801
Annushkin, Y.M.; Maslov, G.F. 1982: Experimental investigation of the combustion of hydrogen-kerosene fuel in an air-direct flow channel. Combustion, Explosion, and Shock Waves 18(2): 151-156
Shelukhin, G.G.; Buldakov, V.F.; Belov, V.P. 1969: Experimental investigation of the combustion process in heterogeneous condensed systems. Combustion, Explosion, and Shock Waves 5(1): 27-33
Liu, Z.; Li, S.; Liu, M.; Guan, D.; Sui, X.; Wang, N. 2017: Experimental investigation of the combustion products in an aluminised solid propellant. Acta Astronautica 133: 136-144
Tyul'panov, R.S.; Alimpiev, A.I. 1971: Experimental investigation of the combustion stability of fuel droplets burning in a turbulent flow. Combustion, Explosion, and Shock Waves 4(3): 215-218
Adawi, A.; Youssef, M.A.; Meshaly, M.E. 2015: Experimental investigation of the composite action between hollowcore slabs with machine-cast finish and concrete topping. Engineering Structures 91: 1-15
Eseme, E.; Littke, R.; Krooss, B.; Schwarzbauer, J. 2006: Experimental investigation of the compositional variation of acyclic paraffins during expulsion from source rocks. Journal of Geochemical Exploration 89(1-3): 100-103
Mazzulla, A.; Sambles, J.R. 1997: Experimental investigation of the compressible continuum theory of a homeotropically aligned ferroelectric liquid crystal. Liquid Crystals 22(6): 727-733
Guades, E.J. 2016: Experimental investigation of the compressive and tensile strengths of geopolymer mortar: the effect of sand/fly ash (S/FA) ratio. Construction and Building Materials 127: 484-493
Tereshina, N.A.; Ivanov, A.V.; Shebeko, Y.N. 1982: Experimental investigation of the concentration ignition limits of ternary mixtures of the type hydrocarbon-ethyl bromide-air. Combustion, Explosion, and Shock Waves 18(1): 102-103
Boumedjane, M.; Karimi, M.; Al-Maamari, R.S.; Aoudia, M. 2019: Experimental investigation of the concomitant effect of potential determining ions Mg2+/SO42− and Ca2+/SO42− on the wettability alteration of oil-wet calcite surfaces. Journal of Petroleum Science and Engineering 179: 574-585
Charun, H.; Bohdal, T.; Czapp, M. 2013: Experimental investigation of the condensation of R134a and R404A refrigerants in a long, water-cooled, serpentine coils. International Journal of Heat and Mass Transfer 67: 602-612
Erdamar, O.; Skarlatos, Y.; Aktas, G.; Inci, M. 2006: Experimental investigation of the conduction mechanism of hydrogenated PEG thin films at high relative humidities. Solid State Ionics 177(37-38): 3217-3221
Thomas, F.O.; Nelson, R.C.; Liu, X. 2000: Experimental investigation of the confluent boundary layer of a high-lift system. AIAA Journal 38: 978-988
Lu, Q.; Liu, Y.; Han, G.; Fang, C.; Shao, Y.; Zhang, J.; Hao, Y. 2018: Experimental investigation of the contact resistance of Graphene/Mo S2 interface treated with O2 plasma. Superlattices and Microstructures 114: 421-427
Park, S.; Kim, T.H.; Jeong, J.H. 2016: Experimental investigation of the convective heat transfer coefficient for open-cell porous metal fins at low Reynolds numbers. International Journal of Heat and Mass Transfer 100: 608-614
Wallerbos, E.; Hoogenboom, J. 1998: Experimental investigation of the count-loss effect due to the time interval between counting-gates in the Feynman-α method. Annals of Nuclear Energy 25(4-5): 203-208
Bodelot, L.; Voropaieff, J.; Pössinger, T. 2017: Experimental investigation of the coupled magneto-mechanical response in magnetorheological elastomers. Experimental Mechanics 58(2): 207-221
Il'ichev, N. N.; Pashinin, P. P.; Shpuga, S M. 1994: Experimental investigation of the coupling between fluctuations in the radiation energy at the fundamental and second-harmonic frequencies of a single-frequency passively Q-switched neodymium laser. Quantum Electronics 24(9): 777-779
Priem, C.; Othman, R.; Rozycki, P.; Guillon, D. 2014: Experimental investigation of the crash energy absorption of 2.5D-braided thermoplastic composite tubes. Composite Structures 116: 814-826
Kampf, K.; Crawley, E.F.; Hansman Jr., R.J. 1989: Experimental investigation of the crashworthiness of scaled composite sailplane fuselages. Journal of Aircraft 26(7): 675-681
Leontiev, A.; Mostinsky, I.; Polonsky, V.; Styrikovich, M.; Chernika, I. 1981: Experimental investigation of the critical heat flux in horizontal channels with circumferentially variable heating. International Journal of Heat and Mass Transfer 24(5): 821-828
Axns, I. 1978: Experimental investigation of the critical ionization velocity in gas mixtures. Astrophysics and Space Science 55(1): 139-146
Cutting, R. A.; Rios-Tascon, F.; Goodsell, J. E. 2020: Experimental investigation of the crush performance of prepreg platelet molding compound tubes. Journal of Composite Materials 54(27): 4311-4324
Gao, X.; Wei, P.; Xie, Y.; Zhang, S.; Niu, Z.; Lou, Y.; Yang, X.; Jin, L.; Yan, J. 2017: Experimental investigation of the cubic thermal energy storage unit with coil tubes. Energy Procedia 142: 3709-3714
Fischer, F.W. 1968: Experimental investigation of the current density distribution in a simulated MHD generator. AIAA Journal 6(5): 894-900
Abdelkawy, A.; Hossam, M.; El-Hofy, H. 2018: Experimental investigation of the cutting forces and edge chipping in ultrasonic-assisted drilling of soda glass. International Journal of Advanced Manufacturing Technology 100(5-8): 1433-1449
Ghafarizadeh, S.; Lebrun, G.; Chatelain, J. 2015: Experimental investigation of the cutting temperature and surface quality during milling of unidirectional carbon fiber reinforced plastic. Journal of Composite Materials 50(8): 1059-1071
Bellos, E.; Mathioulakis, E.; Papanicolaou, E.; Belessiotis, V. 2018: Experimental investigation of the daily performance of an integrated linear Fresnel reflector system. Solar Energy 167: 220-230
Krien, K.; Günther, C.; Bowman, J.; Klemme, B. 1970: Experimental investigation of the decay 223Ra → 219Rn. Nuclear Physics A 141(1): 75-96
Ullah, N.; Park, S.; Lee, Y.J.; Jeong, Y.U.; Park, S. 2015: Experimental investigation of the decrease in the quality factor and calculation of the mechanical properties of quartz tuning forks from analogous electrical parameters. Journal of the Korean Physical Society 67(4): 733-737
Verleysen, P.; Degrieck, J. 2004: Experimental investigation of the deformation of Hopkinson bar specimens. International Journal of Impact Engineering 30(3): 239-253
Sicat, E.; Gong, F.; Ueda, T.; Zhang, D. 2014: Experimental investigation of the deformational behavior of the interfacial transition zone (ITZ) in concrete during freezing and thawing cycles. Construction and Building Materials 65: 122-131
Maia, A.A.D.; Enriquez, Y.A.M.; de Morais, L.C. 2020: Experimental investigation of the delignification process influence on thermochemical and kinetic properties of biomass. Journal of Thermal Analysis and Calorimetry 146(2): 881-891
Shokouhi, M.; Jalili, A.H.; Samani, F.; Hosseini-Jenab, M. 2015: Experimental investigation of the density and viscosity of CO2-loaded aqueous alkanolamine solutions. Fluid Phase Equilibria 404: 96-108
Vysokova, I.L.; Shvangiradze, R.R. 1973: Experimental investigation of the dependence of temperature and electron density on composition of an arc plasma. Journal of Applied Spectroscopy 19(6): 1565-1568
Belkov, P.V.; Vakatov, V.P.; Tkachenko, B.K.; Shirokov, N.N. 1977: Experimental investigation of the dependence of the gain in a CO2?N2 gasdynamic laser on the water vapor content. Combustion, Explosion, and Shock Waves 12(4): 515-524
Hughey, B.; Shefer, R.; Klinkowstein, R.; Zhao, X.; Kieser, W.; Litherland, A. 1997: Experimental investigation of the destruction of 1 me V 12CH2 molecules in single and double stripping foils. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms 123(1-4): 186-192
Yang, J.; Kopanski, J.; Postula, A.; Bialkowski, M. 2005: Experimental investigation of the dielectric-semiconductor interface with scanning capacitance microscopy. Microelectronics Reliability 45(5-6): 887-890
Summers, H.D.; Rees, P. 1996: Experimental investigation of the differential gain in semiconductor lasers and its influence on Q‐switching performance. Applied Physics Letters 69(14): 2009-2011
Zhou, X.Q.; Wang, L.; Yu, D.; Zhang, C.Y. 2019: Experimental investigation of the dissipation characteristic of sandwich structures with periodically perforated viscoelastic damping material core. Journal of Vibration and Control 25(14): 2008-2024
Generalov, N.A.; Kosynkin, V.D.; Maksimenko, V.A.; Ovechkin, V.Y. 1979: Experimental investigation of the dissociation of molecules of iodine and bromine in the mixtures I2?He and Br2?He at high temperatures. Combustion, Explosion, and Shock Waves 15(1): 102-104
Żywica, G.; Kaczmarczyk, T.Z.; Ihnatowicz, E.; Turzyński, T. 2017: Experimental investigation of the domestic CHP ORC system in transient operating conditions. Energy Procedia 129: 637-643
Veissid, N.; Bonnet, D.; Richter, H. 1995: Experimental investigation of the double exponential model of a solar cell under illuminated conditions: Considering the instrumental uncertainties in the current, voltage and temperature values. Solid-State Electronics 38(11): 1937-1943
Andalib, Z.; Kafi, M.A.; Kheyroddin, A.; Bazzaz, M. 2014: Experimental investigation of the ductility and performance of steel rings constructed from plates. Journal of Constructional Steel Research 103: 77-88
Kettenbeil, C.; Ravichandran, G. 2018: Experimental investigation of the dynamic behavior of metaconcrete. International Journal of Impact Engineering 111: 199-207
Duarte, L.; Dellinger, N.; Dellinger, G.; Ghenaim, A.; Terfous, A. 2019: Experimental investigation of the dynamic behaviour of a fully passive flapping foil hydrokinetic turbine. Journal of Fluids and Structures 88: 1-12
Rabanizada, N.; Lupberger, F.; Johlitz, M.; Lion, A. 2015: Experimental investigation of the dynamic mechanical behaviour of chemically aged elastomers. Archive of Applied Mechanics 85(8): 1011-1023
Han, S.; Zhang, C.; Feng, Z.; Luo, K.; Li, K.; Gao, Z.; Song, S.; Huang, H. 1983: Experimental investigation of the dynamic stability of pulse superconducting magnets. IEEE Transactions on Magnetics 19(3): 338-340
Zanotti, A.; Gibertini, G. 2012: Experimental investigation of the dynamic stall phenomenon on a NACA 23012 oscillating airfoil. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering 227(9): 1375-1388
Loktionov, E.Y.; Protasov, Y.S.; Protasov, Y.Y. 2013: Experimental investigation of the dynamics of laser-induced gas-plasma flows under femtosecond laser ablation of copper in vacuum. Optics and Spectroscopy 115(5): 764-773
Modi, V.; Pradhan, S.; Chu, M.; Tyc, G.; Misra, A. 1996: Experimental investigation of the dynamics of spinning tethered bodies. Acta Astronautica 39(7): 487-495
Agofack, N.; Ghabezloo, S.; Sulem, J.; Garnier, A.; Urbanczyk, C. 2019: Experimental investigation of the early-age mechanical behaviour of oil-well cement paste. Cement and Concrete Research 117: 91-102
Nahidi, S.; Salari, M.; Gavzan, I.J.; Saedodin, S. 2020: Experimental investigation of the effect of C‐rate, electrode gaps, and electrode surface roughness on the performance characterization of lead‐acid batteries. International Journal of Energy Research 45(6): 8231-8242
Shiyanov, D V.; Sukhanov, V B.; Evtushenko, G. S.; Andrienko, O. S. 2004: Experimental investigation of the effect of HBr additions on the lasing characteristics of a Cu Br laser. Quantum Electronics 34(7): 625-629
Jin, Z.; Pasqualini, S.; Qin, B. 2014: Experimental investigation of the effect of Reynolds number on flow structures in the wake of a circular parachute canopy. Acta Mechanica Sinica 30(3): 361-369
Basov, Y.G.; Tokareva, A.N.; Usova, V.M. 1976: Experimental investigation of the effect of a laser reflector on the spectral characteristic of a pulsed lamp. Journal of Applied Spectroscopy 24(2): 176-178
Maleki, G.; Davari, A.R.; Soltani, M.R. 2021: Experimental investigation of the effect of active flow control on the wake of a wind turbine blade. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 235(22): 6122-6138
Bayrak, E.; Çağlayan, A.; Konukman, A.E.S. 2017: Experimental investigation of the effect of air velocity on a unit cooler under frosting condition: a case study. Heat and Mass Transfer 53(10): 3119-3128
Uhl, A.; Braun, S.; Hille, S.; Hörnschemeyer, R.; Stumpf, E. 2017: Experimental investigation of the effect of aircraft trailing vortices on roofs. PAMM 17(1): 695-696
Hajiyan, M.; Ebadi, S.; Mahmud, S.; Biglarbegian, M.; Abdullah, H. 2018: Experimental investigation of the effect of an external magnetic field on the thermal conductivity and viscosity of Fe3O4–glycerol. Journal of Thermal Analysis and Calorimetry 135(2): 1451-1464
Shafabakhsh, G.; Motamedi, M.; Firouznia, M.; Isazadeh, M. 2019: Experimental investigation of the effect of asphalt binder modified with nanosilica on the rutting, fatigue and performance grade. Petroleum Science and Technology 37(13): 1495-1500
Yan, Y.; Fan, W.; Wang, K.; Mu, Y. 2011: Experimental investigation of the effect of bell-shaped nozzles on the two-phase pulse detonation rocket engine performance. Combustion, Explosion, and Shock Waves 47(3): 335-342
Ljungberg, P.; Axner, O. 1996: Experimental investigation of the effect of collisions and temperature on degenerate four-wave mixing. Applied Physics B Laser and Optics 63(1): 69-78
Ullal, A.; Hung, S.; Huang, S.; Liu, Y. 2018: Experimental investigation of the effect of compound protrusion-pin array on heat transfer in an internal rotating cooling channel. Applied Thermal Engineering 140: 23-33
Pottker, G.; Hrnjak, P. 2015: Experimental investigation of the effect of condenser subcooling in R134a and R1234yf air-conditioning systems with and without internal heat exchanger. International Journal of Refrigeration 50: 104-113
Palazoğlu, T.K.; Miran, W. 2018: Experimental investigation of the effect of conveyor movement and sample's vertical position on radio frequency tempering of frozen beef. Journal of Food Engineering 219: 71-80
Woigk, W.; Hallett, S.R.; Jones, M.I.; Kuhtz, M.; Hornig, A.; Gude, M. 2018: Experimental investigation of the effect of defects in Automated Fibre Placement produced composite laminates. Composite Structures 201: 1004-1017
Balasubramanian, R.; Ayyasamy, E.; Shanmugam, S.; Kumar, A.; Tammana, J. 2015: Experimental investigation of the effect of different cooling methods on drill-induced damage in pultruded composites. Polymer Composites 37(9): 2855-2859
Imani-Mofrad, P.; Zeinali Heris, S.; Shanbedi, M. 2018: Experimental investigation of the effect of different nanofluids on the thermal performance of a wet cooling tower using a new method for equalization of ambient conditions. Energy Conversion and Management 158: 23-35
Akbari, S.; Mahmood, S.M.; Tan, I.M.; Bharadwaj, A.M.; Hematpour, H. 2016: Experimental investigation of the effect of different process variables on the viscosity of sulfonated polyacrylamide copolymers. Journal of Petroleum Exploration and Production Technology 7(1): 87-101
Gökay, .; Karabacak, R. 2021: Experimental investigation of the effect of different waveforms on heat transfer in a thermoacoustic cooler. International Journal of Refrigeration 129: 259-266
Heshamudin, N.S.; Katende, A.; Rashid, H.A.; Ismail, I.; Sagala, F.; Samsuri, A. 2019: Experimental investigation of the effect of drill pipe rotation on improving hole cleaning using water-based mud enriched with polypropylene beads in vertical and horizontal wellbores. Journal of Petroleum Science and Engineering 179: 1173-1185
Verwey, C.; Birouk, M. 2017: Experimental investigation of the effect of droplet size on the vaporization process in ambient turbulence. Combustion and Flame 182: 288-297
Daneshfaraz, R.; Majedi Asl, M.; Razmi, S.; Norouzi, R.; Abraham, J. 2020: Experimental investigation of the effect of dual horizontal screens on the hydraulic performance of a vertical drop. International Journal of Environmental Science and Technology 17(5): 2927-2936
Ramezani, M.; Legg, M.J.; Haghighat, A.; Li, Z.; Vigil, R.D.; Olsen, M.G. 2017: Experimental investigation of the effect of ethyl alcohol surfactant on oxygen mass transfer and bubble size distribution in an air-water multiphase Taylor-Couette vortex bioreactor. Chemical Engineering Journal 319: 288-296
Khan, A.; Panthi, R.; Kumar, R.; Mohammed Ibrahim, S. 2019: Experimental investigation of the effect of extended cowl on the flow field of planar plug nozzles. Aerospace Science and Technology 88: 208-221
Cao, C.; Ren, T.; Zhang, Y.; Zhang, L.; Wang, F. 2016: Experimental investigation of the effect of grout with additive in improving ground support. International Journal of Rock Mechanics and Mining Sciences 85: 52-59
Ajith Krishnan, R.; Balasubramanian, K.; Suresh, S. 2018: Experimental investigation of the effect of heat sink orientation on subcooled flow boiling performance in a rectangular microgap channel. International Journal of Heat and Mass Transfer 120: 1341-1357
Oseh, J.O.; Norrdin, M.N.A.M.; Farooqi, F.; Ismail, R.A.; Ismail, I.; Gbadamosi, A.O.; Agi, A.J. 2019: Experimental investigation of the effect of henna leaf extracts on cuttings transportation in highly deviated and horizontal wells. Journal of Petroleum Exploration and Production Technology 9(3): 2387-2404
Yu, X.; Fan, J.; Zhou, Y.; Hao, D.; Chen, J.; Yu, T.; Zhang, C. 2022: Experimental investigation of the effect of hydrogen recirculation on the performance of a proton exchange membrane fuel cell. International Journal of Hydrogen Energy 47(2): 1183-1191
Zhou, Z.; Abass, H.; Li, X.; Teklu, T. 2016: Experimental investigation of the effect of imbibition on shale permeability during hydraulic fracturing. Journal of Natural Gas Science and Engineering 29: 413-430
Wang, P.; Ni, H.; Wang, R.; Li, Z.; Wang, Y. 2016: Experimental investigation of the effect of in-plane vibrations on friction for different materials. Tribology International 99: 237-247
Kamkari, B.; Shokouhmand, H.; Bruno, F. 2014: Experimental investigation of the effect of inclination angle on convection-driven melting of phase change material in a rectangular enclosure. International Journal of Heat and Mass Transfer 72: 186-200
Gannouni, M.; Assaker, I.B.; Chtourou, R. 2015: Experimental investigation of the effect of indium content on the Cu In5S8 electrodes using electrochemical impedance spectroscopy. Materials Research Bulletin 61: 519-527
Zekri, A.; Al-Attar, H.; Al-Farisi, O.; Almehaideb, R.; Lwisa, E.G. 2015: Experimental investigation of the effect of injection water salinity on the displacement efficiency of miscible carbon dioxide WAG flooding in a selected carbonate reservoir. Journal of Petroleum Exploration and Production Technology 5(4): 363-373
Nandakumar, M.; Sudhakar, K.; Natu, H.; Jagadish, G. 2018: Experimental investigation of the effect of laser texturing on the used IC Engine Piston skirt. Materials Today: Proceedings 5(1): 2773-2780
Kam, M.; Şeremet, M. 2021: Experimental investigation of the effect of machinability on surface quality and vibration in hard turning of hardened AISi 4140 steels using ceramic cutting tools. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 235(5): 1565-1574
Zhu, M.; Xie, X.; Wu, K.; Najmi, A.; Jiao, K. 2019: Experimental investigation of the effect of membrane water content on PEM fuel cell cold start. Energy Procedia 158: 1724-1729
Efimov, B.G.; Zaklyaz'minskii, L.A. 1979: Experimental investigation of the effect of mixing conditions in a laval nozzle on the amplification coefficient in supersonic flow. Combustion, Explosion, and Shock Waves 15(1): 82-86
Wan, L.; Chen, M.; Hou, B.; Kao, J.; Zhang, K.; Fu, W. 2018: Experimental investigation of the effect of natural fracture size on hydraulic fracture propagation in 3D. Journal of Structural Geology 116: 1-11
Wei, S.; Lee, M.; Chien, Y.; Chou, T.; Wu, J. 2019: Experimental investigation of the effect of nozzle throat diameter on the performance of a hybrid rocket motor with swirling injection of high-concentration hydrogen peroxide. Acta Astronautica 164: 334-344
Salvador, F.; Lopez, J.; De la Morena, J.; Crialesi-Esposito, M. 2018: Experimental investigation of the effect of orifices inclination angle in multihole diesel injector nozzles. Part 1 – Hydraulic performance. Fuel 213: 207-214
Payri, R.; Salvador, F.; De la Morena, J.; Pagano, V. 2018: Experimental investigation of the effect of orifices inclination angle in multihole diesel injector nozzles. Part 2 – Spray characteristics. Fuel 213: 215-221
Sharifi, M.; Akbari, M. 2019: Experimental investigation of the effect of process parameters on cutting region temperature and cutting edge quality in laser cutting of AL6061T6 alloy. Optik 184: 457-463
Distefano, N.; Leonardi, S. 2019: Experimental investigation of the effect of roundabouts on noise emission level from motor vehicles. Noise Control Engineering Journal 67(4): 282-294
Oliva, J.A.; Pal, K.; Barton, A.; Firth, P.; Nagy, Z.K. 2018: Experimental investigation of the effect of scale-up on mixing efficiency in oscillatory flow baffled reactors (OFBR) using principal component based image analysis as a novel noninvasive residence time distribution measurement approach. Chemical Engineering Journal 351: 498-505
Ju, Y.; Tian, K.; Liu, H.; Reinhardt, H.; Wang, L. 2017: Experimental investigation of the effect of silica fume on the thermal spalling of reactive powder concrete. Construction and Building Materials 155: 571-583
Distefano, N.; Leonardi, S. 2015: Experimental investigation of the effect of speed bumps in sequence on noise emission level from motor vehicles. Noise Control Engineering Journal 63(6): 582-597
Cao, R.; Bolton, J.S. 2018: Experimental investigation of the effect of static load on rolling tire noise. Noise Control Engineering Journal 66(3): 212-221
Kolahdooz, A.; Nourouzi, S.; Bakhshi Jooybari, M.; Hosseinipour, S. 2014: Experimental investigation of the effect of temperature in semisolid casting using cooling slope method. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 230(4): 316-325
Abubakar, M.; Muthuraja, A.; Ahmad, N. 2021: Experimental investigation of the effect of temperature on the density of kaolin clay. Materials Today: Proceedings 41: 791-794
Ma, Q.; Liu, H.; Wang, H.; Sun, L.; Ma, S. 2016: Experimental investigation of the effect of temperature on the strength of polyimide contact structures. Polymer Testing 54: 139-144
Rajabinasab, F.; Abedini, V.; Hadad, M.; Hajighorbani, R. 2020: Experimental investigation of the effect of tool material on the performance of AISi 4140 steel in the rotary near dry electrical discharge machining. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 234(4): 308-317
Fallahzadeh, R.; Aref, L.; Gholamiarjenaki, N.; Nonejad, Z.; Saghi, M. 2020: Experimental investigation of the effect of using water and ethanol as working fluid on the performance of pyramid-shaped solar still integrated with heat pipe solar collector. Solar Energy 207: 10-21
Salameh, T.; Alami, A.H.; Sunden, B. 2015: Experimental investigation of the effect of variously-shaped ribs on local heat transfer on the outer wall of the turning portion of a U-channel inside solar air heater. Heat and Mass Transfer 52(3): 539-546
Mostafapour, A.; Gholizadeh, V. 2013: Experimental investigation of the effect of vibration on mechanical properties of 304 stainless steel welded parts. International Journal of Advanced Manufacturing Technology 70(5-8): 1113-1124
Matthews, D.R.; Summers, H.D.; Smowton, P.M.; Hopkinson, M. 2002: Experimental investigation of the effect of wetting-layer states on the gain–current characteristic of quantum-dot lasers. Applied Physics Letters 81(26): 4904-4906
Golubev, A.; Turtikov, V.; Fertman, A.; Roudskoy, I.; Sharkov, B.; Geissel, M.; Neuner, U.; Roth, M.; Tauschwitz, A.; Wahl, H.; Hoffmann, D.; Funk, U.; Süß, W.; Jacoby, J. 2001: Experimental investigation of the effective charge state of ions in beam–plasma interaction. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment 464(1-3): 247-252
Baccouch, Z.; Mbarek, S.; Jaziri, M. 2016: Experimental investigation of the effects of a compatibilizing agent on the properties of a recycled poly(ethylene terephthalate)/polypropylene blend. Polymer Bulletin 74(3): 839-856
Heidarpour, F.; Farahani, M.; Ghabezi, P. 2018: Experimental investigation of the effects of adhesive defects on the single lap joint strength. International Journal of Adhesion and Adhesives 80: 128-132
Siregar, A.; Rafiq, M.I.; Mulheron, M. 2017: Experimental investigation of the effects of aggregate size distribution on the fracture behaviour of high strength concrete. Construction and Building Materials 150: 252-259
Blecich, P. 2015: Experimental investigation of the effects of airflow nonuniformity on performance of a fin-and-tube heat exchanger. International Journal of Refrigeration 59: 65-74
Xiao, Y.; Xia, Z.; Huang, L.; Ma, L.; Yang, D. 2019: Experimental investigation of the effects of chamber length and boron content on boron-based gel fuel ramjet performance. Acta Astronautica 160: 101-105
Golzari, S.; Kasaeian, A.; Amidpour, M.; Nasirivatan, S.; Mousavi, S. 2018: Experimental investigation of the effects of corona wind on the performance of an air-cooled PV/T. Renewable Energy 127: 284-297
Albertelli, P.; Mussi, V.; Strano, M.; Monno, M. 2021: Experimental investigation of the effects of cryogenic cooling on tool life in Ti6Al4V milling. International Journal of Advanced Manufacturing Technology 117(7-8): 2149-2161
Demirtas, H.; Yilmaz, O.; Kanber, B. 2019: Experimental investigation of the effects of dedicated electrochemical machining parameters on freeform surface machining. Journal of Manufacturing Processes 43: 244-252
Liu, H.; Ma, J.; Dong, F.; Yang, Y.; Liu, X.; Ma, G.; Zheng, Z.; Yao, M. 2018: Experimental investigation of the effects of diesel fuel properties on combustion and emissions on a multi-cylinder heavy-duty diesel engine. Energy Conversion and Management 171: 1787-1800
Ghavidel, E.; Sari, A.H.; Dorranian, D. 2018: Experimental investigation of the effects of different liquid environments on the graphene oxide produced by laser ablation method. Optics-Laser Technology 103: 155-162
Arabaci, E.; İçingür, Y.; Solmaz, H.; Uyumaz, A.; Yilmaz, E. 2015: Experimental investigation of the effects of direct water injection parameters on engine performance in a six-stroke engine. Energy Conversion and Management 98: 89-97
Wantha, C.; Assawamartbunlue, K. 2013: Experimental investigation of the effects of driver housing and resonance tube on the temperature difference across a thermoacoustic stack. Heat and Mass Transfer 49(6): 887-896
Miller, J.M. 1966: Experimental investigation of the effects of elasticity on the stability of manned rotating space stations. Journal of Spacecraft and Rockets 3(6): 943-945
Aldarabseh, S. M.; Merati, P. 2021: Experimental investigation of the effects of intermediate gravity waves on the water evaporation rate. Journal of Thermal Science and Engineering Applications: 1-16
Dutkowski, K.; Fiuk, J.J. 2018: Experimental investigation of the effects of mass fraction and temperature on the viscosity of microencapsulated PCM slurry. International Journal of Heat and Mass Transfer 126: 390-399
Yang, H.; Sakai, K.; Shizuka, H.; Kurebayashi, Y.; Hayakawa, K.; Nagare, T. 2021: Experimental investigation of the effects of super-elasticity on the machinability of Ni Ti alloys. International Journal of Advanced Manufacturing Technology 115(1-2): 581-593
Yang, J.; Lian, H.; Liang, W.; Nguyen, V.P.; Chen, Y. 2018: Experimental investigation of the effects of supercritical carbon dioxide on fracture toughness of bituminous coals. International Journal of Rock Mechanics and Mining Sciences 107: 233-242
Dastyar, P.; Salehi, M.S.; Firoozabadi, B.; Afshin, H. 2020: Experimental investigation of the effects of surfactant on the dynamics of formation process of liquid drops. Journal of Industrial and Engineering Chemistry 89: 183-193
Hadad, M.; Bui, L.Q.; Nguyen, C.T. 2017: Experimental investigation of the effects of tool initial surface roughness on the electrical discharge machining (EDM) performance. International Journal of Advanced Manufacturing Technology 95(5-8): 2093-2104
Alimohammadi, M.; Aghli, Y.; Alavi, E.S.; Sardarabadi, M.; Passandideh-Fard, M. 2017: Experimental investigation of the effects of using nano/phase change materials (NPCM) as coolant of electronic chipsets, under free and forced convection. Applied Thermal Engineering 111: 271-279
Lee, K.L.; Chinnici, A.; Jafarian, M.; Arjomandi, M.; Dally, B.; Nathan, G. 2018: Experimental investigation of the effects of wind speed and yaw angle on heat losses from a heated cavity. Solar Energy 165: 178-188
Galaev, I I.; Konkin, S V.; Latyshev, A D.; Miloradova, T N.; Moroz, M V.; Rebone, V. K.; Rotinyan, M. A.; Tomashevich, N N.; Tret'yakov, N. E.; Fedorov, I. A. 1995: Experimental investigation of the efficiency of overtone generation in a cw supersonic chemical HF laser. Quantum Electronics 25(9): 835-840
Bosi, F.; Piccolroaz, A.; Gei, M.; Corso, F.D.; Cocquio, A.; Bigoni, D. 2014: Experimental investigation of the elastoplastic response of aluminum silicate spray dried powder during cold compaction. Journal of the European Ceramic Society 34(11): 2633-2642
Gizewski, C.; Ehrhard, P. 2012: Experimental investigation of the electrokinetic flow in microchannels with internal electrodes. PAMM 12(1): 465-466
Liang, Y.; Augst, S.; Ammosov, M V.; Lazarescu, S.; Chin, S L. 1995: Experimental investigation of the ellipticity dependence of high-harmonic generation and ionization in argon in the multiphoton regime. Journal of Physics B: Atomic, Molecular and Optical Physics 28(13): 2757-2764
Eisen, F.H.; Uggerh⊘j, E. 1972: Experimental investigation of the energy and depth dependence of flux peaking. Radiation Effects 12(3-4): 233-240
Rieder, K. 1982: Experimental investigation of the energy dependence and evidence for the softness of the He/Ni(110) potential. Surface Science 117(1-3): 13-22
Bethke, S.; Allison, J.; Ambrus, K.; Barlow, R.; Bartel, W.; Bowdery, C.; Cartwright, S.; Chrin, J.; Clarke, D.; Dieckmann, A.; Duerdoth, I.; Eckerlin, G.; Elsen, E.; Felst, R.; Finch, A.; Foster, F.; Greenshaw, T.; Hagemann, J.; Haidt, D.; Heintze, J.; Heinzelmann, G.; Hellenbrand, K.; Hill, P.; Hughes, G.; Kado, H.; Kawagoe, K.; Kleinwort, C.; Knies, G.; Kobayashi, T.; Komamiya, S.; Krehbiel, H.; von Krogh, J.; Kuhlen, M.; Loebinger, F.; Macbeth, A.; Magnussen, N.; Marshall, R.; Meinke, R.; Middleton, R.; Minowa, M.; Murphy, P.; Naroska, B.; Nye, J.; Olsson, J.; Ould-Saada, F.; Petersen, A.; Ramcke, R.; Rieseberg, H.; Schmidt, D.; Schmitt, H.; Smolik, L.; Schneekloth, U.; Skard, J.; Spitzer, J.; Steffen, P.; Stephens, K.; Wagner, A.; Walk 1988: Experimental investigation of the energy dependence of the strong coupling strength. Physics Letters B 213(2): 235-241
Alekseenko, V.D. 1969: Experimental investigation of the energy distribution in a contact explosion. Combustion, Explosion, and Shock Waves 3(1): 97-98
Boudreau, M.; Dumas, G.; Rahimpour, M.; Oshkai, P. 2018: Experimental investigation of the energy extraction by a fully-passive flapping-foil hydrokinetic turbine prototype. Journal of Fluids and Structures 82: 446-472
Aklouche, F.; Loubar, K.; Bentebbiche, A.; Awad, S.; Tazerout, M. 2017: Experimental investigation of the equivalence ratio influence on combustion, performance and exhaust emissions of a dual fuel diesel engine operating on synthetic biogas fuel. Energy Conversion and Management 152: 291-299
Peretz, A. 1968: Experimental investigation of the erosive burning of solid-propellant grains with variable port area. AIAA Journal 6(5): 910-912
Taylor, N.; Hempsell, C.; Macfarlane, J.; Osborne, R.; Varvill, R.; Bond, A.; Feast, S. 2010: Experimental investigation of the evacuation effect in expansion deflection nozzles. Acta Astronautica 66(3-4): 550-562
Verwey, C.; Birouk, M. 2020: Experimental investigation of the evaporation of suspended mono-sized heptane droplets in turbulence intensities approaching unity. Combustion and Flame 219: 425-436
Godlewski, M.P.; Brandhorst, H.W.; Lindholm, F.A.; Sah, C.T. 1977: Experimental investigation of the excess charge. Journal of Electronic Materials 6(3): 373-382
Yang, K.; Wang, Z.; Pan, Y.; Wang, N. 2019: Experimental investigation of the expansion characteristics of vaporized kerosene jets in a quiescent atmospheric environment. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering 234(3): 896-907
Smith, L.T. 1971: Experimental investigation of the expansion of moist air around a sharp corner. AIAA Journal 9(10): 2035-2037
Cui, C.; Zong, S.; Song, Y.; Yin, X.; Cao, F. 2022: Experimental investigation of the extreme seeking control on a transcritical CO2 heat pump water heater. International Journal of Refrigeration 133: 111-122
Islam, A.; Hansen, H.N.; Bondo, M. 2010: Experimental investigation of the factors influencing the polymer–polymer bond strength during two-component injection moulding. International Journal of Advanced Manufacturing Technology 50(1-4): 101-111
Yang, C.; Le, F.; Lee, S.R. 2016: Experimental investigation of the failure mechanism of Cu–Sn intermetallic compounds in SAC solder joints. Microelectronics Reliability 62: 130-140
Kuanhai, D.; Yuanhua, L.; Wanying, L.; Hu, L.; Dezhi, Z.; Yongxing, S. 2016: Experimental investigation of the failure mechanism of P110SS casing under opposed line load. Engineering Failure Analysis 65: 65-73
Armenakas, A.E.; Sciammarella, C.A. 1973: Experimental investigation of the failure mechanism of fiber-reinforced composites subjected to uniaxial tension. Experimental Mechanics 13(2): 49-58
Bastos, L.P.; Deschamps, C.J.; da Silva, A.R. 2017: Experimental investigation of the far-field noise due to jet-surface interaction combined with a chevron nozzle. Applied Acoustics 127: 240-249
Roundi, W.; El Mahi, A.; El Gharad, A.; Rebiere, J. 2018: Experimental investigation of the fatigue behavior of glass/epoxy composites evaluated by the stiffness degradation and damage accumulation. Journal of Composite Materials 53(6): 731-740
Weigle, R.E.; Lasselle, R.R.; Purtell, J.P. 1963: Experimental investigation of the fatigue behavior of thread-type projections. Experimental Mechanics 3(5): 105-111
Fan, X.; Zhao, M.; Wang, T. 2017: Experimental investigation of the fatigue crack propagation in a closed-cell aluminum alloy foam. Materials Science and Engineering: A708: 424-431
Zhao, M.; Fan, X.; Fang, Q.; Wang, T. 2015: Experimental investigation of the fatigue of closed-cell aluminum alloy foam. Materials Letters 160: 68-71
Dyduch, K.; Szerszeń, M.; Destrebecq, J. 1994: Experimental investigation of the fatigue strength of plain concrete under high compressive loading. Materials and Structures 27(9): 505-509
Wang, Y.; Gao, A.; Zheng, S.; Peng, X. 2015: Experimental investigation of the fault diagnosis of typical faults in reciprocating compressor valves. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 230(13): 2285-2299
Kouveliotis, N.K.; Trakadas, P.T.; Hairetakis, I.I.; Capsalis, C.N. 2003: Experimental investigation of the field conditions in a vibrating intrinsic reverberation chamber. Microwave and Optical Technology Letters 40(1): 35-38
Brückmann, H.; Kluge, W.; Schänzler, L. 1967: Experimental investigation of the final-state interaction in the reaction H(d, 2p)n at 50 me V. Physics Letters B 24(13-14): 649-651
Piloto, P.A.; Gavilán, A.B.; Zipponi, M.; Marini, A.; Mesquita, L.M.; Plizzari, G. 2013: Experimental investigation of the fire resistance of partially encased beams. Journal of Constructional Steel Research 80: 121-137
Wu, Q.; Rougelot, T.; Burlion, N.; Bourbon, X. 2014: Experimental investigation of the first desorption isotherm of a high performance concrete with thin sliced samples. Construction and Building Materials 72: 389-397
Huang, Y.; Liu, A.; Fu, J.; Pi, Y. 2017: Experimental investigation of the flexural behavior of CFST trusses with interfacial imperfection. Journal of Constructional Steel Research 137: 52-65
Tunay, T.; Firat, E.; Sahin, B. 2018: Experimental investigation of the flow around a simplified ground vehicle under effects of the steady crosswind. International Journal of Heat and Fluid Flow 71: 137-152
Fontaine, A.; Guntzburger, Y.; Bertrand, F.; Fradette, L.; Heuzey, M. 2013: Experimental investigation of the flow dynamics of rheologically complex fluids in a Maxblend impeller system using PIV. Chemical Engineering Research and Design 91(1): 7-17
Benabed, A.; Limam, K.; Janssens, B.; Bosschaerts, W.; Vercauteren, J. 2019: Experimental investigation of the flow field generated by idealized human foot tapping. Science and Technology for the Built Environment 26(2): 229-236
Jin, Z.; Pasqualini, S.; Yang, Z. 2016: Experimental investigation of the flow structures in the wake of a cross parachute canopy. European Journal of Mechanics - B/Fluids 60: 70-81
Assi, G.R.; Srinil, N.; Freire, C.M.; Korkischko, I. 2014: Experimental investigation of the flow-induced vibration of a curved cylinder in convex and concave configurations. Journal of Fluids and Structures 44: 52-66
Epstein, R.J.; Carbonaro, M.C.; Caudron, F. 1994: Experimental investigation of the flowfield about an unswept afterbody. Journal of Aircraft 31(6): 1281-1290
Palacz, M.; Adamczyk, W.; Piechnik, E.; Stebel, M.; Smolka, J. 2019: Experimental investigation of the fluid flow inside a hydrofluidisation freezing chamber. International Journal of Refrigeration 107: 52-62
Eckert, D.; Handstein, A. 1976: Experimental investigation of the flux density profile in hard superconductors. Physica Status Solidi (a) 37(1): 171-178
Reyes, P.; Castillo, F.; Martı́nez, H. 2001: Experimental investigation of the formation of N atoms in N + Ne, Kr, and Xe collisions. International Journal of Mass Spectrometry 208(1-3): 81-88
Ochmann, P.; Vehoff, H. 1995: Experimental investigation of the fracture toughness of Ni Al bicrystals combined with computer simulations. Materials Science and Engineering: A192-193: 364-370
Kuehner, J.P.; Hamed, A.; Mitchell, J.D. 2015: Experimental investigation of the free convection velocity boundary layer and plume formation region for a heated horizontal cylinder. International Journal of Heat and Mass Transfer 82: 78-97
Sarkar, P.P.; Sarkar, D.; Das, S.; Sarkar, S.; Chowdhury, S.K. 2001: Experimental investigation of the frequency-selective property of an array of dual-tuned printed dipoles. Microwave and Optical Technology Letters 31(3): 189-190
Huang, B.; Lu, W.; Chen, S.; Zhao, X. 2020: Experimental investigation of the functional mechanism of methane displacement by water in the coal. Adsorption Science-Technology 38(9-10): 357-376
Wei, G.; Du, H.; Xu, X.; Zhang, Y.; Qu, Z.; Hu, T.; You, Y. 2014: Experimental investigation of the generation of large-amplitude internal solitary wave and its interaction with a submerged slender body. Science China Physics, Mechanics and Astronomy 57(2): 301-310
Yang, Y.; Zhidong Jia; Qiang Li; Zhicheng Guan, 2006: Experimental investigation of the governing parameters in the electrospinning of polyethylene oxide solution. IEEE Transactions on Dielectrics and Electrical Insulation 13(3): 580-585
Zhang, Y.; Han, N.; Kang, X.; Lan, S.; Zhao, W. 2017: Experimental investigation of the governing parameters of the electrostatic field–induced electrolyte jet micro electrical discharge machining on the silicon wafer. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 232(12): 2201-2209
Lukas, E.; Roloff, C.; van Wachem, B.; Thévenin, D. 2020: Experimental investigation of the grade efficiency of a zigzag separator. Powder Technology 369: 38-52
Olbricht, M.; Luke, A. 2018: Experimental investigation of the heat and mass transfer in a tube bundle absorber of an absorption chiller. Heat and Mass Transfer 55(1): 81-93
Long, Z.; Zhang, P. 2013: Experimental investigation of the heat transfer characteristics of a helium cryogenic thermosyphon. Cryogenics 57: 95-103
Shishkin, A.; Kanizawa, F.T.; Ribatski, G.; Tarasevich, S.; Yakovlev, A. 2018: Experimental investigation of the heat transfer coefficient during convective boiling of R134a in tubes with twisted tape insert. International Journal of Refrigeration 92: 196-207
Zhou, Y.; Cui, X.; Weng, J.; Shi, S.; Han, H.; Chen, C. 2018: Experimental investigation of the heat transfer performance of an oscillating heat pipe with graphene nanofluids. Powder Technology 332: 371-380
Pan, M.; Wang, H.; Zhong, Y.; Hu, M.; Zhou, X.; Dong, G.; Huang, P. 2019: Experimental investigation of the heat transfer performance of microchannel heat exchangers with fan-shaped cavities. International Journal of Heat and Mass Transfer 134: 1199-1208
Sun, J.; Zhu, D.; Yin, Y.; Li, X. 2018: Experimental investigation of the heating performance of refrigerant injection heat pump with a single-cylinder inverter-driven rotary compressor. Journal of Thermal Analysis and Calorimetry 133(3): 1579-1588
Ploshikhin, V.; Prihodovsky, A.; Ilin, A. 2011: Experimental investigation of the hot cracking mechanism in welds on the microscopic scale. Frontiers of Materials Science 5(2): 135-145
Castaneda, D.A.; Natan, B. 2019: Experimental investigation of the hydrogen peroxide – solid hydrocarbon hypergolic ignition. Acta Astronautica 158: 286-295
Zhai, G.; Ding, Y.; Wang, Y.; Ma, Z. 2020: Experimental investigation of the hydrostatic compression of a hollow glass microspheres/epoxy resin under high‐pressure conditions at the full ocean depth. Polymer Composites 41(12): 5331-5342
Zhang, F.; Zhang, L.; Li, Y.; Liu, Z.; Zhu, P. 2018: Experimental investigation of the icing scaling test method for a rotating cone. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering 233(9): 3368-3380
Li, Y.; Xia, Z.; Hu, J.; Ma, L.; Na, X.; He, Z. 2021: Experimental investigation of the ignition and combustion characteristics of electrically controlled solid propellant. Acta Astronautica 184: 167-179
Yang, K.; Pan, Y.; Wang, Z.; Wang, N.; Li, X. 2020: Experimental investigation of the ignition characteristics of vaporized RP-3 kerosene in supersonic flow. Acta Astronautica 174: 1-10
Yang, S.; Zhang, C.; Lin, Y.; Xue, X.; Gan, X. 2020: Experimental investigation of the ignition process in a separated dual-swirl spray flame. Combustion and Flame 219: 161-177
Jin, Z.; Zhang, H.; Yang, Z. 2017: Experimental investigation of the impact and freezing processes of a water droplet on an ice surface. International Journal of Heat and Mass Transfer 109: 716-724
Yang, Y.; Zhou, T.; Sciacchitano, A.; Veldhuis, L.; Eitelberg, G. 2017: Experimental investigation of the impact of a propeller on a streamwise impinging vortex. Aerospace Science and Technology 69: 582-594
Salman, A.S.; Abdulrazzaq, N.M.; Oudah, S.K.; Tikadar, A.; Anumbe, N.; Paul, T.C.; Khan, J.A. 2019: Experimental investigation of the impact of geometrical surface modification on spray cooling heat transfer performance in the non-boiling regime. International Journal of Heat and Mass Transfer 133: 330-340
Tambroni, N.; Figueiredo da Silva, J.; Duck, R.; McLelland, S.; Venier, C.; Lanzoni, S. 2016: Experimental investigation of the impact of macroalgal mats on the wave and current dynamics. Advances in Water Resources 93: 326-335
Thomas, J.C.; Hadden, R.M.; Simeoni, A. 2017: Experimental investigation of the impact of oxygen flux on the burning dynamics of forest fuel beds. Fire Safety Journal 91: 855-863
Kotopouleas, A.; Giridharan, R.; Nikolopoulou, M.; Watkins, R.; Yeninarcilar, M. 2021: Experimental investigation of the impact of urban fabric on canyon albedo using a 1:10 scaled physical model. Solar Energy 230: 449-461
Li, J.; Yu, Y.; Bao, S.; Sun, Q. 2015: Experimental investigation of the important influence of pretreatment process of thermally exfoliated graphene on their microstructure and supercapacitor performance. Electrochimica Acta 180: 187-195
Messali, F.; Esposito, R.; Ravenshorst, G.J.P.; Rots, J.G. 2020: Experimental investigation of the in-plane cyclic behaviour of calcium silicate brick masonry walls. Bulletin of Earthquake Engineering 18(8): 3963-3994
Di Lemma, F.; Nakajima, K.; Yamashita, S.; Osaka, M. 2017: Experimental investigation of the influence of Mo contained in stainless steel on Cs chemisorption behavior. Journal of Nuclear Materials 484: 174-182
Qiao, Z.; Qu, D.; Wang, H.; Wu, D.; Wang, B. 2016: Experimental investigation of the influence of chip interference on burr height in machining micro V-grooves on electroplated copper roll die. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 232(8): 1491-1497
Balázs, B.Z.; Takács, M. 2021: Experimental investigation of the influence of cutting parameters on surface quality and on the special characteristics of micro-milled surfaces of hardened steels. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 235(23): 6996-7008
Schmidt, M.; Bück, A.; Tsotsas, E. 2017: Experimental investigation of the influence of drying conditions on process stability of continuous spray fluidized bed layering granulation with external product separation. Powder Technology 320: 474-482
Zhang, X.; Liu, Z.; Wang, J.; Gou, Y.; Meng, S.; Ma, C. 2006: Experimental investigation of the influence of electric field on frost layer growth under natural convection condition. Progress in Natural Science 16(4): 410-415
Yang, Y.; Lou, C. 2006: Experimental investigation of the influence of filters on regeneration performance in self-phase modulation based regenerator. Microwave and Optical Technology Letters 49(1): 192-195
Meyer, V.; Maxit, L.; Renou, Y.; Audoly, C. 2017: Experimental investigation of the influence of internal frames on the vibroacoustic behavior of a stiffened cylindrical shell using wavenumber analysis. Mechanical Systems and Signal Processing 93: 104-117
Zhao, J.; Cao, L.; Lu, H. 2015: Experimental investigation of the influence of laser intensity on the quality of Einstein-Podolsky-Rosen entangled photons. Optoelectronics Letters 11(4): 317-320
Minoshima, W.; White, J.L.; Spruiell, J.E. 1980: Experimental investigation of the influence of molecular weight distribution on the rheological properties of polypropylene melts. Polymer Engineering and Science 20(17): 1166-1176
Presser, M.; Geiss, P. 2011: Experimental investigation of the influence of residual stress due to curing shrinkage on the interphase formation in adhesively bonded joints. Procedia Engineering 10: 2743-2748
Ebaga-Ololo, J.; Chon, B.H. 2018: Experimental investigation of the influence of salinity gradient on low-concentration surfactant flooding in Berea sandstone. Journal of Industrial and Engineering Chemistry 68: 355-363
Chinnici, A.; Nathan, G.; Dally, B. 2021: Experimental investigation of the influence of solar-to-fuel ratio on performance and stability characteristics of hybrid solar-MILD hydrogen processes. Proceedings of the Combustion Institute 38(4): 6723-6731
Hazimeh, R.; Challita, G.; Khalil, K.; Othman, R. 2015: Experimental investigation of the influence of substrates' fibers orientations on the impact response of composite double-lap joints. Composite Structures 134: 82-89
Wang, X.; Zheng, H.; Si, M.; Han, X.; Chen, G. 2015: Experimental investigation of the influence of surfactant on the heat transfer performance of pulsating heat pipe. International Journal of Heat and Mass Transfer 83: 586-590
Pásztory, Z.; Horváth, T.; Glass, S.V.; Zelinka, S. 2018: Experimental investigation of the influence of temperature on thermal conductivity of multilayer reflective thermal insulation. Energy and Buildings 174: 26-30
Zimmer, S.; Langlois, L.; Laye, J.; Bigot, R. 2009: Experimental investigation of the influence of the FSW plunge processing parameters on the maximum generated force and torque. International Journal of Advanced Manufacturing Technology 47(1-4): 201-215
Le Dréau, J.; Heiselberg, P.; Jensen, R. 2014: Experimental investigation of the influence of the air jet trajectory on convective heat transfer in buildings equipped with air-based and radiant cooling systems. Journal of Building Performance Simulation 8(5): 312-325
Puch, F.; Hopmann, C. 2014: Experimental investigation of the influence of the compounding process and the composite composition on the mechanical properties of a short flax fiber–reinforced polypropylene composite. Polymer Composites 36(12): 2282-2290
Alammar, A.A.; Al-Dadah, R.K.; Mahmoud, S.M. 2018: Experimental investigation of the influence of the geyser boiling phenomenon on the thermal performance of a two-phase closed thermosyphon. Journal of Cleaner Production 172: 2531-2543
Monteiro Jr., P.C.; Silva, L.L.; Netto, T.A.; Savi, M.A. 2013: Experimental investigation of the influence of the heating rate in an SMA actuator performance. Sensors and Actuators A: Physical 199: 254-259
Jang, S.; Park, S.; Choi, K.; Kim, H. 2010: Experimental investigation of the influences of shape and surface area on the EGR cooler efficiency. Heat and Mass Transfer 47(6): 621-628
James, R.B.; Schweig, E.; Smith, D.L.; McGill, T.C. 1982: Experimental investigation of the infrared absorption saturation inp‐type germanium and silicon. Applied Physics Letters 40(3): 231-233
Parks, H.V.; Spain, E.M.; Smedley, J.E.; Leone, S.R. 1998: Experimental investigation of the initial-state alignment dependence in the energy pooling process:Ca(4s4p3P1)+Ca(4s4p3P1)→Ca(4s4p1P1)+Ca(4s2). Physical Review A 58(3): 2136-2147
Tamadonfar, P.; Gülder, .L. 2015: Experimental investigation of the inner structure of premixed turbulent methane/air flames in the thin reaction zones regime. Combustion and Flame 162(1): 115-128
Becker, M.L.; Palazotto, A.N.; Khot, N.S. 1982: Experimental investigation of the instability of composite cylindrical panels. Experimental Mechanics 22(10): 372-376
Konishi, Y.; Asai, M. 2004: Experimental investigation of the instability of spanwise-periodic low-speed streaks. Fluid Dynamics Research 34(5): 299-315
Zhang, A.; Xiao, W.; Wang, S. 2013: Experimental investigation of the interaction between a pulsating bubble and a rigid cylinder. Acta Mechanica Sinica 29(4): 503-512
Vatazhin, A.; Likhter, V.; Shulgin, V. 2000: Experimental investigation of the interaction of charged liquid dispersed phase with turbulent air-steam jet. Journal of Aerosol Science 31: 664-665
Gao, S.; Jin, J.; Hu, G.; Qi, L. 2019: Experimental investigation of the interface bond properties between SHCC and concrete under sulfate attack. Construction and Building Materials 217: 651-663
Krömer, F.J.; Moreau, S.; Becker, S. 2019: Experimental investigation of the interplay between the sound field and the flow field in skewed low-pressure axial fans. Journal of Sound and Vibration 442: 220-236
Chamon, L.; Pereira, D.; Rossi Jr., E.; Silva, C.; Lichtenthäler Filho, R.; Gomes, L. 1995: Experimental investigation of the ion-ion potential for the system at large interaction distances. Nuclear Physics A 582(1-2): 305-313
Afaneh, F.; Dörner, R.; Schmidt, L.; Schmidt-Böcking, H. 2005: Experimental investigation of the ionization dynamics in slow p–H2 collisions. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms 234(4): 431-440
Kraiem, M.; Mayer, K.; Gouder, T.; Seibert, A.; Wiss, T.; Thiele, H.; Hiernaut, J. 2010: Experimental investigation of the ionization mechanisms of uranium in thermal ionization mass spectrometry in the presence of carbon. International Journal of Mass Spectrometry 289(2-3): 108-118
Grundler, D.; David, B.; Doessel, O. 1995: Experimental investigation of the kinetic inductance in YBa2Cu3O7square washer superconducting quantum interference devices. Journal of Applied Physics 77(10): 5273-5277
Boiko, B.B.; Insarova, N.I.; Olefir, G.I.; Petrov, N.S.; Chernyavskii, V.A. 1983: Experimental investigation of the lasing parameters of a laser with a thin absorbing layer in the resonator. Journal of Applied Spectroscopy 39(1): 760-764
Mair, G.; Hamacher, K.; Wenzl, H. 1976: Experimental investigation of the lattice parameter and length change near the melting point of gallium in search for premelting effects. Zeitschrift fr Physik B Condensed Matter and Quanta 24(3): 301-305
Davari, A. R.; Abdollahi, R.; Azimizadeh, E. 2017: Experimental investigation of the leading edge vortex formation on unsteady boundary layer. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 232(18): 3263-3280
Morrison, A.M.; Ingram, C.W. 1971: Experimental investigation of the lee-side flow from a cone-cylindermodel. AIAA Journal 9(7): 1421-1423
Lunardon, M.; Viesti, G.; Bazzacco, D.; Fabris, D.; Nebbia, G.; Ur, C.; Rossi Alvarez, C.; Cinausero, M.; Farnea, E.; Fioretto, E.; Prete, G.; de Angelis, G.; Napoli, D.; Hagel, K.; Natowitz, J.; Wada, R. 2002: Experimental investigation of the level density in highly excited nuclei around 208Pb. The European Physical Journal A 13(4): 419-428
Balabas, M.V.; Karuzin, M.I.; Pazgalev, A.S. 1999: Experimental investigation of the longitudinal relaxation time of electronic polarization of the ground state of potassium atoms in a cell with an antirelaxation coating on the walls. Journal of Experimental and Theoretical Physics Letters 70(3): 196-200
van Overbeeke, F.; Oordt, K.; van de Klundert, L. 1985: Experimental investigation of the loss characteristics of superconductors for AC power applications. IEEE Transactions on Magnetics 21(2): 366-369
Gunes, R.; Ozkes, I.; Nair, F.; Kemal Apalak, M. 2020: Experimental investigation of the low-velocity impact response of sandwich plates with functionally graded core. Journal of Composite Materials 54(24): 3571-3593
Oliver, B.M.; Clements, R.M.; Smy, P.R. 1973: Experimental investigation of the low‐frequency capacitive response of a plasma sheath. Journal of Applied Physics 44(10): 4511-4517
Mak, P.; Asmussen, J. 1997: Experimental investigation of the matching and impressed electric field of a multipolar electron cyclotron resonance discharge. Journal of Vacuum Science-Technology A: Vacuum, Surfaces, and Films 15(1): 154-168
McLaughlin, D.K.; Carter, J.E.; Finston, M.; Forney, J.A. 1971: Experimental investigation of the mean flow of the laminar supersonic cone wake. AIAA Journal 9(3): 479-484
Ehrke, B.; Erfkamp, J.; Wallmersperger, T. 2021: Experimental investigation of the mechanical behavior of a poly(acrylamide-co-sodium acrylate) hydrogel. Journal of Intelligent Material Systems and Structures 33(2): 309-318
Ramezani-Dana, H.; Gomina, M.; Bréard, J.; Orange, G. 2021: Experimental investigation of the mechanical behavior of glass fiber/high fluidity polyamide-based composites for automotive market. Journal of Reinforced Plastics and Composites 40(21-22): 827-844
Meng, G.; Gao, B.; Zhou, J.; Cao, G.; Zhang, Q. 2016: Experimental investigation of the mechanical behavior of the steel fiber reinforced concrete tunnel segment. Construction and Building Materials 126: 98-107
Costa, H.R.; Reis, J.M.; Souza, J.P.; Pacheco, P.M.; Aguiar, R.A.; De Barros, S. 2015: Experimental investigation of the mechanical behaviour of spot welding–adhesives joints. Composite Structures 133: 847-852
Myekhlai, M.; Munkhbayar, B.; Lee, T.; Tanshen, M.R.; Chung, H.; Jeong, H. 2014: Experimental investigation of the mechanical grinding effect on graphene structure. RSC Adv. 4(5): 2495-2500
Ghrib, T.; Tlili, B.; Nouveau, C.; Benlatreche, Y.; Lambertin, M.; Yacoubi, N.; Ennasri, M. 2009: Experimental investigation of the mechanical micro structural and thermal properties of thin Cr AIN layers deposited by PVD technique for various aluminum percentages. Physics Procedia 2(3): 1327-1336
Ambrogio, G.; Palumbo, G.; Sgambitterra, E.; Guglielmi, P.; Piccininni, A.; De Napoli, L.; Villa, T.; Fragomeni, G. 2018: Experimental investigation of the mechanical performances of titanium cranial prostheses manufactured by super plastic forming and single-point incremental forming. International Journal of Advanced Manufacturing Technology 98(5-8): 1489-1503
Del Rosso, S.; Iannucci, L.; Curtis, P.T. 2015: Experimental investigation of the mechanical properties of dry microbraids and microbraid reinforced polymer composites. Composite Structures 125: 509-519
Aboshio, A.; Green, S.; Ye, J. 2015: Experimental investigation of the mechanical properties of neoprene coated nylon woven reinforced composites. Composite Structures 120: 386-393
Chen, C.; Zhao, S.; Han, X.; Cui, M.; Zhao, X.; Ishida, T. 2017: Experimental investigation of the mechanical reshaping process for joining aluminum alloy sheets with different thicknesses. Journal of Manufacturing Processes 26: 105-112
Gong, H.; Wang, S.; Knysh, P.; Korkolis, Y.P. 2016: Experimental investigation of the mechanical response of laser-welded dissimilar blanks from advanced- and ultra-high-strength steels. Materials-Design 90: 1115-1123