Home
  >  
Section 86

EurekaMag Full Text Articles Chapter 85,600



References:

Perugu, C.S.; Verma, K.K.; Madhu, H.C.; Pambannan, P. 2021: Microstructural and Texture Evolution of Hot-Rolled TA32 Alloy and its Effect on Tensile Properties. JOM 73(5): 1428-1439
Chen, H.; Xu, W.; Ye, Z.; Yao, Y.; Qu, J.; Yun, F.; Warner, J. A.; Cheng, Z.; Liu, J.; Ringer, S.P.; Ferry, M.; Zheng, R. 2017: Microstructural and Texture Evolution of Strip Cast Nd–Fe–B Flake. Crystal Growth-Design 17(12): 6550-6558
León, C.A.; Rodríguez-Ortiz, G.; Aguilar-Reyes, E.; Nanko, M.; Takeda, M. 2014: Microstructural and Thermal Characterization of Copper Based Composites for Thermal Management in Electronic Packaging. Advanced Materials Research 976: 148-153
Aksu Canbay, C.; Sampath, V. 2017: Microstructural and Thermal Investigations of Cu-Al-Mn-Ni Shape Memory Alloys. Materials Today: Proceedings 4(10): 10682-10689
Tailor, S.; Singh, M.; Mohanty, R.M.; Doub, A.V. 2016: Microstructural and Thermal properties of Plasma Sprayed YSZ Nano-Clusters Thermal Barrier Coatings. Journal of Cluster Science 27(5): 1501-1518
Yu, Y.; Zhang, B.; Zhu, S.; Zhang, Z.; Lu, W.; Shen, T.; Wang, Z. 2020: Microstructural and Tribological Characteristics of in Situ Induced Chrome Carbide Strengthened Co Cr Fe Mn Ni High-Entropy Alloys. Journal of Materials Engineering and Performance 29(6): 3714-3722
Ali, L.F.; Kuppuswamy, N.; Soundararajan, R.; Ramkumar, K.R.; Sivasankaran, S. 2021: Microstructural and Wear Behaviour of Al 6063–W Nanocomposites Developed Using Friction Stir Processing. Metals and Materials International 27(12): 5462-5473
Ande, R.; Gulati, P.; Kumar Shukla, D.; Dhingra, H. 2019: Microstructural and Wear Characteristics of Friction Stir Processed Al-7075/Si C Reinforced Aluminium Composite. Materials Today: Proceedings 18: 4092-4101
Molins, R.; Bartout, J.; Bienvenu, Y. 1991: Microstructural and analytical characterization of Al2O3(AlMg) composite interfaces. Materials Science and Engineering: A135: 111-117
Kim, T.; Yoon, Y. 2000: Microstructural and atomic arrangement studies in Fe (110)/Ga as (110) heterostructures. Journal of Physics and Chemistry of Solids 61(6): 847-851
Bobić, B.; Vencl, A.; Ružić, J.; Bobić, I.; Damnjanović, Z. 2018: Microstructural and basic mechanical characteristics of ZA27 alloy-based nanocomposites synthesized by mechanical milling and compocasting. Journal of Composite Materials 53(15): 2033-2046
Galván, D.; Hirata, G.; Adem, E. 2006: Microstructural and chemical analysis performed by HRTEM and EDS on YBa2Cu3O7−x/Ag films irradiated with electrons. Materials Science and Engineering: B126(1): 28-32
Yan, M.; Mori, T.; Zou, J.; Auchterlonie, G.; Drennan, J. 2010: Microstructural and chemical aspects of working-temperature aged Ca-doped Ce O2. Journal of the European Ceramic Society 30(12): 2505-2513
Mahata, A.; Datta, P.; Basu, R.N. 2015: Microstructural and chemical changes after high temperature electrolysis in solid oxide electrolysis cell. Journal of Alloys and Compounds 627: 244-250
Abonneau, E.; Perez, A.; Fuchs, G.; Treilleux, M. 1991: Microstructural and chemical characterization of ion beam mixed Fe/Al2O3 interface; effect on adhesion enhancement. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms 59-60: 1183-1186
Chen, Y.; Chen, S.; Hackett, G.; Finklea, H.; Song, X.; Gerdes, K. 2011: Microstructural and chemical evolution near anode triple phase boundary in Ni/YSZ solid oxide fuel cells. Solid State Ionics 204-205: 87-90
Ehle, L.; Harst, S.; Meyer, H.; Schupp, A.; Beyss, O.; Rommes, B.; Klink, A.; Schwedt, A.; Zander, D.; Weirich, T.; Mayer, J. 2021: Microstructural and chemical surface and rim zone changes of ferrite‐perlite 42Cr Mo4 steel after electrochemical machining. Materialwissenschaft und Werkstofftechnik 52(11): 1214-1229
Chen, Y.; Zhang, H.; Fox, D.; Faulkner, C.C.; Jeng, D.; Bari, M. 2013: Microstructural and chemical variation of Ti O2 electrodes in DSSCs after ethanol vapour treatment. Materials Science and Engineering: B178(1): 71-76
Yin, J.; Lai, C.; Zhang, X.; Zhang, L.; Wang, X.; Wang, X.; Deng, Z.; Zhuo, X.; He, B.; Deng, L. 2021: Microstructural and columnar growth characteristics of 7YSZ thermal barrier coatings fabricated by plasma spray physical vapor deposition. Journal of the European Ceramic Society 41(16): 315-323
Ahmed, A.S.; Rawlings, R.D.; Ellacott, S.D.; Boccaccini, A.R. 2011: Microstructural and compositional characterisation of the pyrocarbon interlayer in Si C coated low density carbon/carbon composites. Journal of the European Ceramic Society 31(1-2): 189-197
Calliari, I.; Magrini, M.; Zambon, A.; Guerriero, P.; Martini, R. 1999: Microstructural and compositional characterization of Roman coins. X-Ray Spectrometry 28(2): 86-90
Ashkenazi, A.; Komen, Y.; Lerner, I. 1993: Microstructural and compositional characterization of Ti W/Al(0.8%Si)/Ti W/Pt Si/(100)Si. Applied Surface Science 65-66: 746-751
Long, H.; Mao, S.; Liu, Y.; Zhang, Z.; Han, X. 2018: Microstructural and compositional design of Ni-based single crystalline superalloys ― a review. Journal of Alloys and Compounds 743: 203-220
Liu, D.; Gao, S.; Zhang, Y.; Yu, S.; Wang, F. 2019: Microstructural and compositional evolution of core-shell Fe Si Al composites during high-temperature annealing. Ceramics International 45(17): 21804-21809
Wang, Y.; Wang, Y.; Ji, H.; Yan, X.; Gao, H.; Ma, W.; Zhang, Z. 2016: Microstructural and compositional evolution of nanoporous silver during dealloying of rapidly solidified Mg 65 Ag 35 alloy. Intermetallics 76: 49-55
Faase, K.; Warnes, W.; Lee, P.; Larbalestier, D. 1995: Microstructural and compositional gradients in the filament-matrix region of Nb-Ti wire composites. IEEE Transactions on Appiled Superconductivity 5(2): 1197-1200
Nutter, J.; Saiz, A.I.; Iurlina, M.O. 2019: Microstructural and conformational changes of gluten proteins in wheat-rye sourdough. Journal of Cereal Science 87: 91-97
Jackson, A.T.; Scrivens, J.H.; Williams, J.P.; Baker, E.S.; Gidden, J.; Bowers, M.T. 2004: Microstructural and conformational studies of polyether copolymers. International Journal of Mass Spectrometry 238(3): 287-297
Spigarelli, S.; Jäger, A.; El Mehtedi, M.; Gärtnerová, V. 2016: Microstructural and constitutive analysis in process modeling of hot working: the case of a Mg-Zn-Mn alloy. Materials Science and Engineering: A661: 40-50
Shin, D.S.; Oh, J.W.; Kim, H.J.; Park, S.J. 2018: Microstructural and core loss behaviors of addictive Fe-17 at% P based on Fe-3.5 wt% Si alloys in powder injection molding. Journal of Alloys and Compounds 749: 758-767
Sunilraj, S.; Blessto, B.; Sivaprasad, K.; Muthupandi, V. 2021: Microstructural and corrosion behavior of MAO coated 5052 aluminum alloy. Materials Today: Proceedings 41: 1120-1124
Zhou, L.; Schneider, M.M.; Giri, A.; Cho, K.; Sohn, Y. 2017: Microstructural and crystallographic characteristics of modulated martensite, non-modulated martensite, and pre-martensitic tweed austenite in Ni-Mn-Ga alloys. Acta Materialia 134: 93-103
Bisht, A.; Ray, N.; Jagadeesh, G.; Suwas, S. 2017: Microstructural and crystallographic response of shock-loaded pure copper. Journal of Materials Research 32(8): 1484-1498
Li, X.; Zhang, J.; Akiyama, E.; Wang, Y.; Li, Q. 2018: Microstructural and crystallographic study of hydrogen-assisted cracking in high strength PSB1080 steel. International Journal of Hydrogen Energy 43(37): 17898-17911
Pratapa, S.; Umaroh, K.; Weddakarti, E. 2011: Microstructural and decomposition rate studies of periclase-added aluminum titanate–corundum functionally-graded materials. Materials Letters 65(5): 854-856
Bo, Z.; Jinjiang, Z.; Lei, G.; Weiliang, W. 2005: Microstructural and deformational studies on mylonite in the detachment faults of Yalashangbo dome, North Himalayan domes zone. Progress in Natural Science 15(11): 1005-1013
Sistani, P.B.; Kiani-Rashid, A.; Beidokhti, S.M. 2019: Microstructural and diametral tensile strength evaluation of the zirconia-mullite composite. Ceramics International 45(6): 7127-7136
Kawano, H.; Morii, K.; Nakayama, Y. 1991: Microstructural and dielectric properties of Ba Ti O3 thin films prepared by atom beam sputtering. Materials Letters 12(4): 252-256
Devi, L.S.; Babu, K.V.; Babu, B.V.; Kumari, L.U.; Samatha, K.; Veeraiah, V. 2021: Microstructural and dielectric properties of Li Ni0.5Co0.45Zn0.05PO4 cathode material. Ferroelectrics 571(1): 26-38
Vallar, S.; El Fallah, J.; Haussonne, J. 1999: Microstructural and dielectric properties of ceramics based on tetragonal tungsten bronze. Ferroelectrics 224(1): 355-364
Huang, H.; Zhou, L.M.; Kong, L.B. 2006: Microstructural and dielectric studies of A-site calcium doped Pb Zr0.94Ti0.06O3 ceramics. Journal of Electroceramics 16(4): 343-346
Nakada, T. 2005: Microstructural and diffusion properties of CIGS thin film solar cells fabricated using transparent conducting oxide back contacts. Thin Solid Films 480-481: 419-425
Balmain, J.; Loudjani, M.; Huntz, A. 1997: Microstructural and diffusional aspects of the growth of alumina scales on β-Ni Al. Materials Science and Engineering: A224(1-2): 87-100
Comes, R.; Gu, M.; Khokhlov, M.; Lu, J.; Wolf, S.A. 2012: Microstructural and domain effects in epitaxial Co Fe2O4 films on Mg O with perpendicular magnetic anisotropy. Journal of Magnetism and Magnetic Materials 324(4): 524-527
Hussain, M.; Bakalis, S.; Gouseti, O.; Akhtar, S.; Hameed, A.; Ismail, A. 2017: Microstructural and dynamic oscillatory aspects of yogurt as influenced by hydrolysed guar gum. International Journal of Food Science-Technology 52(10): 2210-2216
Neeleshwar, S.; Reddy, P.; Muralidhar, M.; Koblischka, M.; Murakami, M. 1999: Microstructural and elastic behaviour of OCMG-processed Nd Ba Cu O materials. Materials Science and Engineering: B65(3): 164-169
Kant, R.; Singh, K.; Pandey, O. 2009: Microstructural and electrical behavior of Bi4V2−x Cux O11−δ (0≤x≤0.4). Ceramics International 35(1): 221-227
Liu, Y.; Fu, Z.; Chen, X.; Wei, Y.; Zhang, B.; Chang, A. 2021: Microstructural and electrical changes in Ca 0.9 R 0.1 Ce Nb Mo O 8 ( R  = Y, Sm, Nd, La) ceramics induced by rare‐earth ion doping. Journal of the American Ceramic Society 104(5): 2134-2142
Savić, S.; Mančić, L.; Vojisavljević, K.; Stojanović, G.; Branković, Z.; Aleksić, O.; Branković, G. 2011: Microstructural and electrical changes in nickel manganite powder induced by mechanical activation. Materials Research Bulletin 46(7): 1065-1071
Berger, M.; Sayir, A.; Dynys, F.; Berger, P. 2006: Microstructural and electrical characterisation of melt grown high temperature protonic conductors. Solid State Ionics 177(26-32): 2339-2345
Bernik, S.; Mac̆ek, S.; Ai, B. 2001: Microstructural and electrical characteristics of Y2O3-doped Zn O–Bi2O3-based varistor ceramics. Journal of the European Ceramic Society 21(10-11): 1875-1878
Zhu, H.; Sun, X.; Kang, L.; Zhang, Y.; Yu, Z.; Ouyang, J.; Pan, W. 2016: Microstructural and electrical characteristics of epitaxial Bi Fe O3thick films sputtered at different Ar/O2flow ratios. CrystEngComm 18(24): 4604-4612
Wojtowicz, T.; Matias, V.; Marie, P.; Mamor, M.; Pipeleers, B.; Ruterana, P.; Vantomme, A. 2003: Microstructural and electrical characterization of Er and Eu implanted gallium nitride. Materials Science and Engineering: B105(1-3): 122-125
Molin, S.; Sabato, A.; Bindi, M.; Leone, P.; Cempura, G.; Salvo, M.; Cabanas Polo, S.; Boccaccini, A.; Smeacetto, F. 2017: Microstructural and electrical characterization of Mn-Co spinel protective coatings for solid oxide cell interconnects. Journal of the European Ceramic Society 37(15): 4781-4791
Sudireddy, B.; Blennow, P.; Nielsen, K. 2012: Microstructural and electrical characterization of Nb-doped Sr Ti O3–YSZ composites for solid oxide cell electrodes. Solid State Ionics 216: 44-49
Suasmoro, S.; Khalfi, M.; Khalfi, A.; Trolliard, G.; Smith, D.; Bonnet, J. 2012: Microstructural and electrical characterization of bulk YBa2Cu3O7−δ ceramics. Ceramics International 38(1): 29-38
Horovistiz, A.; Muccillo, E. 2012: Microstructural and electrical characterizations of chemically prepared Ce0.8Gd0.2−x(Ag, Sr)x O1.9 (0≤x≤0.02). Solid State Ionics 225: 428-431
Hernandez, T.; Vila, R.; Jurado, J.; Chinarro, E.; Molla, J.; Martin, P. 2008: Microstructural and electrical features of lithium Ce-monazite. Solid State Ionics 179(7-8): 256-262
Kim, J.K.; Je, J.H.; Lee, J.W.; Park, Y.J.; Kim, T.; Jung, I.; Lee, B.; Lee, J. 2001: Microstructural and electrical investigation of Ni/au ohmic contact on p-type Ga N. Journal of Electronic Materials 30(2): L8-L12
Kim, Y.; Lee, J.; Lee, B. 1998: Microstructural and electrical investigation of Pd/Ge/Ti/au ohmic contact to pseudomorphic high electron mobility transistor with undoped cap layer. Journal of Applied Physics 84(2): 911-917
Kwak, J.S.; Kim, H.N.; Baik, H.K.; Lee, J.; Shin, D.W.; Park, C.G.; Kim, H.; Pyun, K. 1996: Microstructural and electrical investigations of Pd/Ge/Ti/au ohmic contact ton‐type Ga as. Journal of Applied Physics 80(7): 3904-3909
Sebastian, S.; Kulandaisamy, I.; Valanarasu, S.; Yahia, I.S.; Kim, H.; Vikraman, D. 2019: Microstructural and electrical properties evaluation of lead doped tin sulfide thin films. Journal of Sol-Gel Science and Technology 93(1): 52-61
Song, Z.; Lin, C.; Wang, L.; Wang, S.; Wang, L.; Gao, J.; Fu, X. 2001: Microstructural and electrical properties in textured lead calcium lanthanum titanate thin films deposited on a Pt/Ti/Si O2/Si substrate. Materials Letters 47(4-5): 219-224
Reddy, P.S.; Janardhanam, V.; Jyothi, I.; Chang, H.; Lee, S.; Lee, M.S.; Reddy, V.R.; Choi, C. 2017: Microstructural and electrical properties of Al/n-type Si Schottky diodes with Au-Cu Pc nanocomposite films as interlayer. Superlattices and Microstructures 111: 506-517
Zhu, J.; Zheng, L.; Luo, W B.; Li, Y R.; Zhang, Y. 2006: Microstructural and electrical properties of Ba Ti O3epitaxial films on Sr Ti O3substructures with a la Ni O3conductive layer as a template. Journal of Physics D: Applied Physics 39(11): 2438-2443
Cho, S.; Yoon, J.; Kim, J.; Zhang, X.; Manthiram, A.; Wang, H. 2011: Microstructural and electrical properties of Ce0.9Gd0.1O1.95 thin-film electrolyte in solid-oxide fuel cells. Journal of Materials Research 26(7): 854-859
Igbari, O.; Xie, Y.; Jin, Z.; Liao, L. 2015: Microstructural and electrical properties of Cu Al O2 ceramic prepared by a novel solvent-free ester elimination process. Journal of Alloys and Compounds 653: 219-227
Jyothi, I.; Janardhanam, V.; Hwang, J.Y.; Lee, W.; Park, Y.C.; Kang, H.C.; Lee, S.; Choi, C. 2016: Microstructural and electrical properties of Cu-germanide formed on p-type Ge wafer. Journal of Alloys and Compounds 655: 198-202
Kim, T.; Yoon, Y. 2000: Microstructural and electrical properties of Pb(Zr 0.52 Ti 0.48 )O 3 films grown on p-in Sb (111) substrates at low temperature. Journal of Physics and Chemistry of Solids 61(4): 529-535
Park, J. 2015: Microstructural and electrical properties of Y0.2Al0.1Mn0.27−x Fe0.16Ni0.27−x(Cr2x)oy for NTC thermistors. Ceramics International 41(5): 6386-6390
Ben Karoui, M.; Gharbi, R.; Elzayed, N.; Fathallah, M.; Tresso, E. 2009: Microstructural and electrical properties of amorphous carbon nitride. Physics Procedia 2(3): 873-879
Resnik, D.; Kovač, J.; Vrtačnik, D.; Godec, M.; Pečar, B.; Možek, M. 2017: Microstructural and electrical properties of heat treated resistive Ti/Pt thin layers. Thin Solid Films 639: 64-72
Choi, M.; Lim, J.; Choi, J.; Eom, J.; Park, B.; Kim, K.; Kim, D.; Yoon, S. 2015: Microstructural and electrical properties of lead-free 0.5Ba(Zr 0.2 Ti 0.8 )O 3 –0.5(Ba 0.7 Ca 0.3 )Ti O 3 (BZT–BCT) epitaxial films grown on Si (0 0 1) substrates. Scripta Materialia 108: 96-99
Tian, H.; Liu, H.; Cheng, H. 2015: Microstructural and electrical properties of thick film resistors on oxide/oxide ceramic–matrix composites. Ceramics International 41(2): 3214-3219
Kim, T.W.; Yoon, Y.S. 2000: Microstructural and electrical property studies of Pb(Zr0.52Ti0.48)O3 films grown on p-in P (100) substrates by a radio-frequency magnetron-sputtering technique at low temperature. Journal of Materials Research 15(1): 199-202
Chaure, S.; Chaure, N.; Hassan, A.; Ray, A.; Reehal, H.; Ghermazion, A.; Capan, R. 2005: Microstructural and electrical studies on diamond films. Vacuum 77(3): 231-235
Gyawali, G.; Hamal, K.; Joshi, B.; Rajbhandari (Nyachhyon), A.; Wohn Lee, S. 2014: Microstructural and electrochemical analysis of Ni–Si C composite coatings prepared in presence of additives. Materials Letters 126: 228-231
Palma-Goyes, R.E.; Vazquez-Arenas, J.; Ostos, C.; Ferraro, F.; Torres-Palma, R.A.; Gonzalez, I. 2016: Microstructural and electrochemical analysis of Sb 2 O 5 doped-Ti/Ru O 2 -Zr O 2 to yield active chlorine species for ciprofloxacin degradation. Electrochimica Acta 213: 740-751
Makhdoom, M.A.; Ahmad, A.; Kamran, M.; Abid, K.; Haider, W. 2017: Microstructural and electrochemical behavior of 2205 duplex stainless steel weldments. Surfaces and Interfaces 9: 189-195
Sun, Z.; Liu, Z.; Han, B.; Miao, S.; Du, J.; Miao, Z. 2006: Microstructural and electrochemical characterization of Ru O2/CNT composites synthesized in supercritical diethyl amine. Carbon 44(5): 888-893
Palomino, L.E.M.; Castro, J.F.W.d.; Aoki, I.V.; Melo, H.G.d. 2003: Microstructural and electrochemical characterization of environmentally friendly conversion layers on aluminium alloys. Journal of the Brazilian Chemical Society 14(4): 651-659
Xie, J.; Luan, B.L. 2008: Microstructural and electrochemical characterization of hydroxyapatite-coated Ti6Al4V alloy for medical implants. Journal of Materials Research 23(3): 768-779
Brisse, A.; Sauvet, A.; Barthet, C.; Georges, S.; Fouletier, J. 2007: Microstructural and electrochemical characterizations of an electrolyte with an apatite structure, La9Sr1Si6O26.5. Solid State Ionics 178(23-24): 1337-1343
Elmkhah, H.; Attarzadeh, F.; Fattah-alhosseini, A.; Kim, K.H. 2018: Microstructural and electrochemical comparison between Ti N coatings deposited through HIPIMS and DCMS techniques. Journal of Alloys and Compounds 735: 422-429
Sivajee Ganesh, K.; Purusottam Reddy, B.; Jeevan Kumar, P.; Jayanthbabu, K.; Rosaiah, P.; Hussain, O.M. 2015: Microstructural and electrochemical properties of Li Ti y Co 1-y O2 film cathodes prepared by RF sputtering. Journal of Solid State Electrochemistry 19(12): 3621-3627
Choi, J.; Lee, S.; Cho, W.; Cho, B. 2011: Microstructural and electrochemical properties of Ti-doped Al2O3 coated Li Co O2 films. Metals and Materials International 17(4): 649-654
Rosaiah, P.; Hussain, O.M. 2014: Microstructural and electrochemical properties of rf-sputtered Li Fe PO4 thin films. Ionics 20(8): 1095-1101
Jayanth Babu, K.; Jeevan Kumar, P.; Hussain, O.M. 2012: Microstructural and electrochemical properties of rf-sputtered Li Mn2O4 thin film cathodes. Applied Nanoscience 2(4): 401-407
Soin, N.; Roy, S.S.; Lim, T.H.; McLaughlin, J.A. 2011: Microstructural and electrochemical properties of vertically aligned few layered graphene (FLG) nanoflakes and their application in methanol oxidation. Materials Chemistry and Physics 129(3): 1051-1057
Antoniassi, B.; González, A.; Fernandes, S.; Graeff, C. 2011: Microstructural and electrochemical study of La0.5Li0.5Ti O3. Materials Chemistry and Physics 127(1-2): 51-55
Bouzegzi, N.; Miroud, D.; Ahnia, F.; Alcala, G.; Perez, F.J.; Khenfer, K.; Tata, M.; Mato, S. 2018: Microstructural and electrochemical study of a brazed WC based metal matrix composite obtained by infiltration process. Journal of Alloys and Compounds 759: 22-31
Durai, G.; Kuppusami, P.; Arulmani, S.; Anandan, S.; Khadeer Pasha, S.; Kheawhom, S. 2021: Microstructural and electrochemical supercapacitive properties of Cr‐doped Cu O thin films: Effect of substrate temperature. International Journal of Energy Research 45(14): 20001-20015
Srivastava, A.; Deepa, M.; Singh, S.; Kishore, R.; Agnihotry, S. 2005: Microstructural and electrochromic characteristics of electrodeposited and annealed WO3 films. Solid State Ionics 176(11-12): 1161-1168
Larbalestier, D.; Daeumling, M.; Lee, P.; Kelly, T.; Seuntjens, J.; Meingast, C.; Cai, X.; McKinnell, J.; Ray, R.; Dillenburg, R.; Hellstrom, E. 1987: Microstructural and electromagnetic characterization of La2−x Srx Cu O4. Cryogenics 27(8): 411-415
Bahiraei, H.; Ong, C. 2017: Microstructural and electromagnetic study of low temperature fired nano crystalline Mg Cu Zn ferrite with Bi2O3 addition. Ceramics International 43(6): 4780-4784
Kim, T.W.; Lee, D.U.; Choo, D.C.; Oh, H.J.; Hyun, J.W.; Kang, S.O.; Yoo, K.H.; Yoon, Y.S. 2002: Microstructural and electronic properties of Ni thin films grown onp-in P (100) substrates. Journal of Applied Physics 91(7): 4238-4241
Kountz, D.; Gai, P.; Wilker, C.; Holstein, W.; Pellicone, F.; Brainard, R. 1993: Microstructural and electronic properties of highly oriented Tl/sub 0.5/Pb/sub 0.5/Sr/sub 2/Cu/sub 2/O/sub 7/ films on la Al O/sub 3/. IEEE Transactions on Applied Superconductivity 3(1): 1222-1225
Rahman, A.; Bates Jr., C. W.; Marshall, A. F.; Qadri, S. B.; Bari, T. 1999: Microstructural and electronic transport properties of Ptx Si/p-Si(100) metal–semiconductor composite films. Materials Letters 39(6): 343-349
Li, Y.; Ma, C.; Juleff, G.; Murakami, Y.; Zhou, Z.; Li, Y. 2019: Microstructural and elemental analyses of slags excavated from Xuxiebian iron‐smelting site, Sichuan, China. Archaeometry 61(6): 1353-1365
Reeves, R.K.; Hoeppner, D.W. 1978: Microstructural and environmental effects on fretting fatigue. Wear 47(2): 221-229
Attarian, M.; Karimi Taheri, A.; Jalilvand, S.; Habibi, A. 2016: Microstructural and failure analysis of welded primary reformer furnace tube made of HP-Nb micro alloyed heat resistant steel. Engineering Failure Analysis 68: 32-51
Alman, D.E.; Rawers, J.C.; Hawk, J.A. 1995: Microstructural and failure characteristics of metal-lntermetallic layered sheet composites. Metallurgical and Materials Transactions A 26(3): 589-599
Jia, Z.; Wei, L.; Huang, H.; Liu, C.; Jiang, H.; Xu, X. 2021: Microstructural and fatigue crack growth behavior inhomogeneity of trace Sc added 7085 alloy friction stir welded joint. Fatigue-Fracture of Engineering Materials-Structures 44(5): 1257-1270
Nunes, M.; Leite, E.; Pontes, F.; Duboc, N.; Longo, E.; Varela, J. 2001: Microstructural and ferroelectric properties of Pb Zr1−x Tix O3 thin films prepared by the polymeric precursor method. Materials Letters 49(6): 365-370
Raghavan, C.M.; Kim, J.W.; Song, T.K.; Kim, S.S. 2015: Microstructural and ferroelectric properties of rare earth (Ce, Pr, and Tb)-doped Na 0.5 Bi 4.5 Ti 3 O 15 thin films. Applied Surface Science 355: 1007-1012
Rüssel, M.; Krüger, L.; Martin, S.; Kreuzer, W. 2013: Microstructural and fracture toughness characterisation of a high-strength Fe Cr Mo VC alloy manufactured by rapid solidification. Engineering Fracture Mechanics 99: 278-294
Cooper, C.; Lin, Y. 2002: Microstructural and gas separation properties of CVD modified mesoporous γ-alumina membranes. Journal of Membrane Science 195(1): 35-50
Chin, E.J.; Soustelle, V.; Hirth, G.; Saal, A.E.; Kruckenberg, S.C.; Eiler, J.M. 2016: Microstructural and geochemical constraints on the evolution of deep arc lithosphere. Geochemistry, Geophysics, Geosystems 17(7): 2497-2521
Pérez-Bustamante, R.; Bolaños-Morales, D.; Bonilla-Martínez, J.; Estrada-Guel, I.; Martínez-Sánchez, R. 2014: Microstructural and hardness behavior of graphene-nanoplatelets/aluminum composites synthesized by mechanical alloying. Journal of Alloys and Compounds 615: S578-S582
Amine, T.; Newkirk, J.W.; El-Sheikh, H.E.F.; Liou, F. 2014: Microstructural and hardness investigation of tool steel D2 processed by laser surface melting and alloying. International Journal of Advanced Manufacturing Technology 73(9-12): 1427-1435
Chen, Z.; Lu, Y.; Ding, X.; Shoji, T. 2016: Microstructural and hardness investigations on a dissimilar metal weld between low alloy steel and Alloy 82 weld metal. Materials Characterization 121: 166-174
Sameera Devi, C.; Buchi Suresh, M.; Kumar, G.; Prasad, G. 2018: Microstructural and high temperature dielectric, ferroelectric and complex impedance spectroscopic properties of Bi Fe O3 modified NBT-BT lead free ferroelectric ceramics. Materials Science and Engineering: B228: 38-44
Rotaru, A.; Morrison, F.D. 2016: Microstructural and high-temperature impedance spectroscopy study of Ba6MNb9O30 (M=Ga, Sc, In) relaxor dielectric ceramics with tetragonal tungsten bronze structure. Ceramics International 42(10): 11810-11821
Bolelli, G.; Cannillo, V.; Gadow, R.; Killinger, A.; Lusvarghi, L.; Rauch, J. 2009: Microstructural and in vitro characterisation of high-velocity suspension flame sprayed (HVSFS) bioactive glass coatings. Journal of the European Ceramic Society 29(11): 2249-2257
Cañas, E.; Orts, M.; Boccaccini, A.; Sánchez, E. 2019: Microstructural and in vitro characterization of 45S5 bioactive glass coatings deposited by solution precursor plasma spraying (SPPS). Surface and Coatings Technology 371: 151-160
Zangooie, S.; Persson, P.O.A.; Hilfiker, J.N.; Hultman, L.; Arwin, H. 2000: Microstructural and infrared optical properties of electrochemically etched highly doped 4H–Si C. Journal of Applied Physics 87(12): 8497-8503
Kim, T.W.; Lee, D.U.; Choo, D.C.; Kim, H.J.; Lee, H.S.; Lee, J.Y.; Kim, M.D. 2001: Microstructural and interband transition properties of vertically stacked in As/Ga as self-assembled quantum dots embedded in modulation-doped heterostructures. Applied Physics Letters 79(1): 33-35
Kim, T.; Lee, D.; Jung, M.; Lee, J.; Kim, H.; Choo, D.; Kim, J.; Yoon, Y. 2001: Microstructural and interfacial properties of the Ru/p-in P(100) heterostructures. Journal of Physics and Chemistry of Solids 62(4): 711-715
Lanzutti, A.; Andreatta, F.; Magnan, M.; Fedrizzi, L. 2018: Microstructural and in‐depth electrochemical characterization of Zn diffusion layers on aluminum 3xxx alloy. Surface and Interface Analysis 51(12): 1165-1172
Colín, J.; Serna, S.; Campillo, B.; Flores, O.; Juárez-Islas, J. 2008: Microstructural and lattice parameter study of as-cast and rapidly solidified Ni Al intermetallic alloys with Cu additions. Intermetallics 16(7): 847-853
Mukherjee, S.; Maitra, T.; Nayak, A.; Mukherjee, S.; Pradhan, A.; Mukhopadhyay, M.; Satpati, B.; Bhunia, S. 2018: Microstructural and light emission properties of Zn Sn P2 thin film absorber: Study of native defects. Materials Chemistry and Physics 204: 147-153
Yao, Y.; Zhao, G.; Zou, X.; Huang, L.; Wang, X. 2015: Microstructural and lipid composition changes in milk fat globules during milk powder manufacture. RSC Advances 5(77): 62638-62646
Lanzutti, A.; Andreatta, F.; Lekka, M.; Fedrizzi, L. 2019: Microstructural and local electrochemical characterisation of Gr. 91 steel-welded joints as function of post-weld heat treatments. Corrosion Science 148: 407-417
Borchers, C.; Gärtner, F.; Stoltenhoff, T.; Assadi, H.; Kreye, H. 2003: Microstructural and macroscopic properties of cold sprayed copper coatings. Journal of Applied Physics 93(12): 10064-10070
Gómez-Esparza, C.; Baldenebro-López, F.; Santillán-Rodríguez, C.; Estrada-Guel, I.; Matutes-Aquino, J.; Herrera-Ramírez, J.; Martínez-Sánchez, R. 2014: Microstructural and magnetic behavior of an equiatomic Ni Co Al Fe alloy prepared by mechanical alloying. Journal of Alloys and Compounds 615: S317-S323
Ramesh, S.; Chandra Sekhar, B.; Subba Rao, P.; Parvatheeswara Rao, B. 2014: Microstructural and magnetic behavior of mixed Ni–Zn–Co and Ni–Zn–Mn ferrites. Ceramics International 40(6): 8729-8735
Yu, A.C.; Han, X.; Murai, J.; Ando, Y.; Miyazaki, T.; Hiraga, K. 2002: Microstructural and magnetic characteristics of Ir Mn exchange-biased tunnel junctions. Journal of Magnetism and Magnetic Materials 240(1-3): 130-133
Zhou, F.; He, K.Y.; Bai, K.C. 1996: Microstructural and magnetic characteristics of nanocrystalline Fe89Zr7B4soft magnetic alloys. Journal of Applied Physics 80(9): 5209-5212
Zheng, C.; Lin, K.; Liu, C.; Hsu, H.; Leung, C.; Chen, W.; Wu, T.; Desautels, R.D.; van Lierop, J.; Pong, P.W. 2015: Microstructural and magnetic characterization of ion-beam bombarded [Ni80Fe20-Cr]50 thin films. Vacuum 118: 85-89
Stewart, S J.; Borzi, R A.; Punte, G.; Mercader, R C.; Garcia, F. 2001: Microstructural and magnetic characterization of nanostructured α-Fe2O3and Cu O mixtures obtained by ball milling. Journal of Physics: Condensed Matter 13(8): 1743-1757
Fortas, G.; Haine, N.; Sam, S.; Gabouze, N.; Saifi, A.; Ouir, S.; Menari, H. 2015: Microstructural and magnetic characterizations of Co Fe Cu electrodeposited in self-assembled mesoporous silicon. Journal of Magnetism and Magnetic Materials 378: 29-36
Zhou, T.; Xue, J.; Liu, W.; Wang, M.; Song, T. 2020: Microstructural and magnetic evolution of Mn Zn/Fe Si Al composites synthesized by mechanochemistry. Ceramics International 46(2): 1784-1792
Basso, V.; Bertotti, G.; Duhaj, P.; Ferrara, E.; Haslar, V.; Kraus, L.; Pokorny, J.; Zaveta, K. 1996: Microstructural and magnetic investigation of partially crystallized amorphous ribbons. Journal of Magnetism and Magnetic Materials 157-158: 217-219
Almessiere, M.; Slimani, Y.; Sayed, H.E.; Baykal, A.; Ercan, I. 2019: Microstructural and magnetic investigation of vanadium-substituted Sr-nanohexaferrite. Journal of Magnetism and Magnetic Materials 471: 124-132
Lewis, L.H.; Bian, W.; Zhu, Y.; Welch, D.O. 1996: Microstructural and magnetic investigations into the origins of high coercivity in die‐upset praseodymium–cobalt–carbon based magnets. Journal of Applied Physics 79(1): 351-360
Akyol, M.; Kılıç Çetin, S.; Ekicibil, A. 2016: Microstructural and magnetic properties of Ax:Zn1-x O (A=Mn, Gd and Mn/Gd) nanocrystals. Philosophical Magazine 96(1): 31-44
Song, J.; Lee, S. 2007: Microstructural and magnetic properties of Co Fe Zr films and the tunnel magnetoresistance behaviors of the magnetic tunnel junctions with amorphous Co Fe Zr ferromagnetic layers. Journal of Magnetism and Magnetic Materials 310(2): 1923-1925
Fries, M.; Pfeuffer, L.; Bruder, E.; Gottschall, T.; Ener, S.; Diop, L.V.; Gröb, T.; Skokov, K.P.; Gutfleisch, O. 2017: Microstructural and magnetic properties of Mn-Fe-P-Si (Fe2 P-type) magnetocaloric compounds. Acta Materialia 132: 222-229
Cao, L.; Handstein, A.; Schultz, L.; Müller, K. 1996: Microstructural and magnetic properties of Sm2Fe15Ga2C2 permanent magnets. Journal of Magnetism and Magnetic Materials 157-158: 95-96
Pavan Kumar Naik, S.; Missak Swarup Raju, P. 2016: Microstructural and magnetic properties of YBCO nanorods: synthesized by template growth method. AIMS Materials Science 3(3): 916-926
Kumar, S.; Singh, J.; Kaur, H.; Singh, H.; Singh Dosanjh, H. 2019: Microstructural and magnetic properties of Zn substituted nickel ferrite synthesised by facile solution combustion method. Micro-Nano Letters 14(7): 727-731
Asti, G.; Carbucicchio, M.; Ghidini, M.; Rateo, M.; Ruggiero, G.; Solzi, M.; D'Orazio, F.; Lucari, F. 2000: Microstructural and magnetic properties of exchange-coupled Co/Fe multilayers. Journal of Applied Physics 87(9): 6689-6691
Sudhakar Reddy, E.; Rajasckharan, T.; Ravi Kumar, G.; Chandrasekhar Rao, T.; Sahni, V. 1999: Microstructural and magnetic properties of textured Gd Ba2Cu3Oy/Gd2Ba Cu O5 composites fabricated from Gd2Ba Cu O5 preforms. Materials Science and Engineering: B57(3): 179-185
Sudhakar Reddy, E.; Rajasekharan, T. 1999: Microstructural and magnetic properties of textured Gd Ba2Cu3Oy/Gd2Ba Cu O5 composites fabricated from Gd2Ba Cu O5 preforms. Physica C: Superconductivity 316(3-4): 279-286
Dehlinger, A.; Le Berre, M.; Canut, B.; Chatelon, J.; Albertini, D.; Perrot, S.; Givord, D.; Rousseau, J. 2010: Microstructural and magnetic properties of thick (≥10μm) magnetron sputtered barium ferrite films. Journal of Magnetism and Magnetic Materials 322(21): 3293-3297
Solovev, P.; Izotov, A.; Belyaev, B. 2017: Microstructural and magnetic properties of thin obliquely deposited films: a simulation approach. Journal of Magnetism and Magnetic Materials 429: 45-51
Zhou, L.; Tang, W.; Ke, L.; Guo, W.; Poplawsky, J.D.; Anderson, I.E.; Kramer, M.J. 2017: Microstructural and magnetic property evolution with different heat-treatment conditions in an alnico alloy. Acta Materialia 133: 73-80
Sun, A.; Hsu, J.; Kuo, P.; Huang, H. 2008: Microstructural and magnetic studies of L10 Fe Pt–Si O2 nano-composite thin film with columnar structure for perpendicular magnetic recording. Journal of Magnetism and Magnetic Materials 320(22): 3071-3074
Kuo, P.C.; Yao, Y.D.; Huang, J.H.; Shen, S.C.; Jou, J.H. 1997: Microstructural and magnetic studies of Mn–Al thin films. Journal of Applied Physics 81(8): 5621-5623
Afghahi, S.S.S.; Jafarian, M.; Atassi, Y. 2016: Microstructural and magnetic studies on Ba Mgx Znx X2x Fe12−4x O19 (X=Zr,Ce,Sn) prepared via mechanical activation method to act as a microwave absorber in X-band. Journal of Magnetism and Magnetic Materials 406: 184-191
Dupeyrat, C.; Declémy, A.; Drouet, M.; Eyidi, D.; Thomé, L.; Debelle, A.; Viret, M.; Ott, F. 2009: Microstructural and magnetic study of Fe-implanted 6H-Si C. Physica B: Condensed Matter 404(23-24): 4731-4734
Gopalan, R.; Roy, T.; Rajasekharan, T.; Rangarajan, G.; Hari Babu, N. 1995: Microstructural and magnetisation study in melt-grown YBa Cu O samples. Physica C: Superconductivity 244(1-2): 106-114
Jiang, J.; Shields, T.; Abell, J.; Polyanskii, A.; Feldmann, D.; Larbalestier, D. 1999: Microstructural and magneto-optical characterization of high J/sub c/ BSCCO-2223/Ag tapes. IEEE Transactions on Appiled Superconductivity 9(2): 1812-1815
Boudjadja, Y.; Amira, A.; Mahamdioua, N.; Saoudel, A.; Menassel, S.; Varilci, A.; Terzioglu, C.; Altintas, S. 2017: Microstructural and magneto-transport properties of Bi1.6Pb0.4Sr2Ca1−x Gdx Cu2O8+δ superconducting ceramics. Physica B: Condensed Matter 505: 68-73
Romero, M.; Faccio, R.; Pardo, H.; Tumelero, M.A.; Pasa, A.A.; Mombrú, .W. 2015: Microstructural and magnetotransport studies of novel manganite–sebacic acid nanocomposites prepared at low temperature. Journal of Magnetism and Magnetic Materials 377: 490-495
Qanati, M.V.; Rasooli, A. 2021: Microstructural and main mechanical properties of novalac based carbon–carbon composites as the pyrolysis heating rate. Ceramics International 47(19): 26808-26821
Anand, T.J.S.; Yau, C.K.; Leong, Y.S.; Keat, L.W.; Ting, H.M. 2013: Microstructural and mechanical analysis of Cu and au interconnect on various bond pads. Current Applied Physics 13(8): 1674-1683
Mo, L.; Chen, Z.; Wu, F.; Liu, C. 2015: Microstructural and mechanical analysis on Cu–Sn intermetallic micro-joints under isothermal condition. Intermetallics 66: 13-21
Geng, J.; Liu, G.; Wang, F.; Hong, T.; Xia, C.; Wang, M.; Chen, D.; Ma, N.; Wang, H. 2017: Microstructural and mechanical anisotropy of extruded in-situ Ti B 2 /2024 composite plate. Materials Science and Engineering: A687: 131-140
Singh, B.; Zafar, S. 2020: Microstructural and mechanical aspects of micrometric and nanometric Ni + 10% Cr7C3 composite microwave clads. Journal of Composite Materials 55(3): 347-360
Mittal, R.; Gupta, A.; Pratap, K.; Shukla, P.; Gupta, S.; Shanurrahman, 2020: Microstructural and mechanical behavior in dissimilar T91/T22 welded pipes. Materials Today: Proceedings 26: 316-319
Xu, Z.; Li, Z.; Tong, Y.; Zhang, W.; Wu, Z. 2021: Microstructural and mechanical behavior of a Co Cr Fe Ni Cu4 non-equiatomic high entropy alloy. Journal of Materials Science-Technology 60: 35-43
Sharma, P.; Dwivedi, S.P.; Sharma, R.; Dabra, V.; Sharma, N. 2020: Microstructural and mechanical behavior of aluminium alloy reinforced with Ti C. Materials Today: Proceedings 25: 934-937
Sadeghi, B.; Shamanian, M.; Cavaliere, P.; Ashrafizadeh, F.; Sanayei, M.; Szpunar, J.A. 2017: Microstructural and mechanical behavior of bimodal reinforced Al-based composites produced by spark plasma sintering and FSP. International Journal of Advanced Manufacturing Technology 94(9-12): 3903-3916
Sribalaji, M.; Mukherjee, B.; Islam, A.; Kumar Keshri, A. 2017: Microstructural and mechanical behavior of spark plasma sintered titanium carbide with hybrid reinforcement of tungsten carbide and carbon nanotubes. Materials Science and Engineering: A702: 10-21
Acevedo, J.L.; Morales, C.E.; Rodriguez, B.R.; Cerna, P.B. 2019: Microstructural and mechanical behavior study of 5052 aluminum alloy welded by FSW process. MRS Advances 4(55-56): 3041-3052
Bahrami, M.; Farahmand Nikoo, M.; Besharati Givi, M.K. 2015: Microstructural and mechanical behaviors of nano-Si C-reinforced AA7075-O FSW joints prepared through two passes. Materials Science and Engineering: A626: 220-228
Cannillo, V.; Esposito, L.; Rambaldi, E.; Sola, A.; Tucci, A. 2009: Microstructural and mechanical changes by chemical ageing of glazed ceramic surfaces. Journal of the European Ceramic Society 29(9): 1561-1569
Ramesh, S.; Anne, G.; Naik, G.M.; Jagadeesh, C.; Nayaka, H.S. 2021: Microstructural and mechanical characterisation of Al-Zn-Mg-Cu alloy processed by multi-directional cryo-forging. Materials Today: Proceedings 46: 5752-5756
Auger, M.; Huang, Y.; Zhang, H.; Jones, C.; Hong, Z.; Moody, M.; Roberts, S.; Grant, P. 2018: Microstructural and mechanical characterisation of Fe-14Cr-0.22Hf alloy fabricated by spark plasma sintering. Journal of Alloys and Compounds 762: 678-687
Garcés, G.; Rodríguez, M.; Pérez, P.; Adeva, P. 2010: Microstructural and mechanical characterisation of WE54–Si C composites. Materials Science and Engineering: A527(24-25): 6511-6517
Nekouie Esfahani, M.R.; Coupland, J.; Marimuthu, S. 2015: Microstructural and mechanical characterisation of laser-welded high-carbon and stainless steel. International Journal of Advanced Manufacturing Technology 80(5-8): 1449-1456
Osintsev, K.; Konovalov, S.; Gromov, V.; Panchenko, I.; Ivanov, Y. 2021: Microstructural and mechanical characterisation of non-equiatomic Al2.1Co0.3Cr0.5Fe Ni2.1 high-entropy alloy fabricated via wire-arc additive manufacturing. Philosophical Magazine Letters 101(9): 353-359
Petley, V.; Sathishkumar, S.; Thulasi Raman, K.; Rao, G.; Chandrasekhar, U. 2015: Microstructural and mechanical characteristics of Ni–Cr thin films. Materials Research Bulletin 66: 59-64
Zhao, W.; Shi, Z.; Chen, X.; Yang, G.; Lenardi, C.; Liu, C. 2015: Microstructural and mechanical characteristics of PHEMA-based nanofibre-reinforced hydrogel under compression. Composites Part B: Engineering 76: 292-299
Lee, S.; Katoh, Y.; Park, J.; Dong, S.; Kohyama, A.; Suyama, S.; Yoon, H. 2001: Microstructural and mechanical characteristics of Si C/Si C composites with modified-RS process. Journal of Nuclear Materials 289(1-2): 30-36
Raju, R.; Duraiselvam, M.; Petley, V.; Verma, S.; Rajendran, R. 2015: Microstructural and mechanical characterization of Ti6Al4V refurbished parts obtained by laser metal deposition. Materials Science and Engineering: A643: 64-71
Kishimoto, H.; Shibayama, T.; Shimoda, K.; Kobayashi, T.; Kohyama, A. 2011: Microstructural and mechanical characterization of W/Si C bonding for structural material in fusion. Journal of Nuclear Materials 417(1-3): 387-390
Robe, H.; Zedan, Y.; Chen, J.; Monajati, H.; Feulvarch, E.; Bocher, P. 2015: Microstructural and mechanical characterization of a dissimilar friction stir welded butt joint made of AA2024-T3 and AA2198-T3. Materials Characterization 110: 242-251
Wen, Z.; Yang, X.; Ming, H.; Zhi-hang, P.; Feng, C. 2021: Microstructural and mechanical characterization of a mullite fiber. Ceramics International 47(23): 33252-33258
Soler, R.; Evirgen, A.; Yao, M.; Kirchlechner, C.; Stein, F.; Feuerbacher, M.; Raabe, D.; Dehm, G. 2018: Microstructural and mechanical characterization of an equiatomic YGd Tb Dy Ho high entropy alloy with hexagonal close-packed structure. Acta Materialia 156: 86-96
Kendig, K.L.; Gibala, R.; Miracle, D.B. 2001: Microstructural and mechanical characterization of carbon coatings on Si C fibers. Journal of Materials Research 16(12): 3366-3377
Barajas-Álvarez, M.R.; Bedolla-Jacuinde, A.; Ruiz, A.; López-Morelos, V.H.; Guerra-López, F.V. 2021: Microstructural and mechanical characterization of cobalt-based superalloys with the addition of boron and zirconium. MRS Advances 6(41-42): 923-927
Wang, M.; Jia, D.; He, P.; Zhou, Y. 2011: Microstructural and mechanical characterization of fly ash cenosphere/metakaolin-based geopolymeric composites. Ceramics International 37(5): 1661-1666
Yousaf, M.; Iqbal, T.; Hussain, M.A.; Tabish, A.N.; Haq, E.U.; Siddiqi, M.H.; Yasin, S.; Mahmood, H. 2022: Microstructural and mechanical characterization of high strength porcelain insulators for power transmission and distribution applications. Ceramics International 48(2): 1603-1610
Khan, M.; Zulfaqar, M.; Ali, F.; Subhani, T. 2017: Microstructural and mechanical characterization of hybrid aluminum matrix composite containing boron carbide and Al-Cu-Fe quasicrystals. Metals and Materials International 23(4): 813-822
Srivastava, A.K.; Das, K. 2009: Microstructural and mechanical characterization of in situ Ti C and (Ti,W)C-reinforced high manganese austenitic steel matrix composites. Materials Science and Engineering: A516(1-2): 1-6
Zhang, X.; Song, F.; Wei, Z.; Yang, W.; Dai, Z. 2017: Microstructural and mechanical characterization of in-situ Ti C/Ti titanium matrix composites fabricated by graphene/Ti sintering reaction. Materials Science and Engineering: A705: 153-159
Pavanati, H.; Straffelini, G.; Maliska, A.; Klein, A. 2008: Microstructural and mechanical characterization of iron samples sintered in DC plasma. Materials Science and Engineering: A474(1-2): 15-23
Mostafa Shalaby, R.; Kamal, M.; Ali, E.A.; Gumaan, M.S. 2017: Microstructural and mechanical characterization of melt spun process Sn-3.5Ag and Sn-3.5Ag-x Cu lead-free solders for low cost electronic assembly. Materials Science and Engineering: A690: 446-452
Öztürk, O. 2009: Microstructural and mechanical characterization of nitrogen ion implanted layer on 316L stainless steel. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms 267(8-9): 1526-1530
Okumus, S.C. 2005: Microstructural and mechanical characterization of plasma sprayed Al2O3–Ti O2 composite ceramic coating on Mo/cast iron substrates. Materials Letters 59(26): 3214-3220
Pazhouhanfar, Y.; Sabahi Namini, A.; Delbari, S.A.; Nguyen, T.P.; Le, Q.V.; Shaddel, S.; Pazhouhanfar, M.; Shokouhimehr, M.; Shahedi Asl, M. 2020: Microstructural and mechanical characterization of spark plasma sintered Ti C ceramics with Ti N additive. Ceramics International 46(11): 18924-18932
Aydogan, B.; O'Neil, A.; Sahasrabudhe, H. 2021: Microstructural and mechanical characterization of stainless steel 420 and Inconel 718 multi-material structures fabricated using laser directed energy deposition. Journal of Manufacturing Processes 68: 1224-1235
Zhang, J.; Sun, Y. 2010: Microstructural and mechanical characterization of the Si3N4/Si3N4 joint brazed using Au–Ni–V filler alloys. Journal of the European Ceramic Society 30(3): 751-757
Herrera-Chávez, L.Y.; Ruiz, A.; López-Morelos, V.H.; Rubio-González, C.; Barajas-Álvarez, M.R.; Jacuinde, A.B. 2020: Microstructural and mechanical characterization of the effect of the welding process on creep behavior of welded joint and base metal specimens of Inconel 600. MRS Advances 5(59-60): 3003-3014
Di Luozzo, N.; Doisneau, B.; Boudard, M.; Fontana, M.; Arcondo, B. 2014: Microstructural and mechanical characterizations of steel tubes joined by transient liquid phase bonding using an amorphous Fe–B–Si interlayer. Journal of Alloys and Compounds 615: S18-S22
Bahador, R.; Hosseinabadi, N.; Yaghtin, A. 2020: Microstructural and mechanical characterizations of stir cast aluminum 356–Nb2O5 composite. Advanced Composites and Hybrid Materials 3(4): 594-608
Fruhauf, J.; Roger, J.; Dezellus, O.; Gourdet, S.; Karnatak, N.; Peillon, N.; Saunier, S.; Montheillet, F.; Desrayaud, C. 2012: Microstructural and mechanical comparison of Ti+15%Ti Cp composites prepared by free sintering, HIP and extrusion. Materials Science and Engineering: A554: 22-32
Lataste, E.; Erauw, J.; Olagnon, C.; Fantozzi, G. 2009: Microstructural and mechanical consequences of thermal cycles on a high zirconia fuse-cast refractory. Journal of the European Ceramic Society 29(4): 587-594
Tcheliebou, F.; Boyer, A. 1994: Microstructural and mechanical effects of oxide addition into thin Zr O2 matrix. Materials Science and Engineering: B26(2-3): 175-180
Singh, M.; Asthana, R.; Varela, F.; Martínez-Fernández, J. 2011: Microstructural and mechanical evaluation of a Cu-based active braze alloy to join silicon nitride ceramics. Journal of the European Ceramic Society 31(7): 1309-1316
Bautista, M.; Cancapa, J.Q.; Fernandez, J.M.; Rodríguez, M.; Singh, M. 2011: Microstructural and mechanical evaluation of porous biomorphic silicon carbide for high temperature filtering applications. Journal of the European Ceramic Society 31(7): 1325-1332
Chen, N.; Wang, M.; Wang, H.; Wan, Z.; Carlson, B.E. 2018: Microstructural and mechanical evolution of Al/steel interface with Fe2Al5 growth in resistance spot welding of aluminum to steel. Journal of Manufacturing Processes 34: 424-434
Zhang, H.; Wang, W.; Bai, H.; Zou, G.; Liu, L.; Peng, P.; Guo, W. 2019: Microstructural and mechanical evolution of silver sintering die attach for Si C power devices during high temperature applications. Journal of Alloys and Compounds 774: 487-494
Lavigne, O.; Gamboa, E.; Costin, W.; Law, M.; Luzin, V.; Linton, V. 2014: Microstructural and mechanical factors influencing high p H stress corrosion cracking susceptibility of low carbon line pipe steel. Engineering Failure Analysis 45: 283-291
Shu, F.; Sun, Y.; Zhao, H.; Song, X.; Sui, S.; He, W.; He, P.; Liu, B.; Xu, B. 2016: Microstructural and mechanical inhomogeneity in the narrow-gap weld seam of thick GMA welded Al–Zn–Mg alloy plates. Journal of Materials Research 31(24): 3948-3955
Abbasian, A.R.; Omidvar-Askary, N. 2019: Microstructural and mechanical investigation of high alumina refractory castables containing nano-titania. Ceramics International 45(1): 287-298
Gergely, G.; Sahin, F.C.; Göller, G.; Yücel, O.; Balázsi, C. 2013: Microstructural and mechanical investigation of hydroxyapatite–zirconia nanocomposites prepared by spark plasma sintering. Journal of the European Ceramic Society 33(12): 2313-2319
Theoulakis, P.; Moropoulou, A. 1997: Microstructural and mechanical parameters determining the susceptibility of porous building stones to salt decay. Construction and Building Materials 11(1): 65-71
Satpathy, M.P.; Sahoo, S.K. 2016: Microstructural and mechanical performance of ultrasonic spot welded Al–Cu joints for various surface conditions. Journal of Manufacturing Processes 22: 108-114
Vidyarthy, R.S.; Dwivedi, D.K. 2018: Microstructural and mechanical properties assessment of the P91 A-TIG weld joints. Journal of Manufacturing Processes 31: 523-535
Ceschini, L.; Morri, A.; Toschi, S.; Johansson, S.; Seifeddine, S. 2015: Microstructural and mechanical properties characterization of heat treated and overaged cast A354 alloy with various SDAS at room and elevated temperature. Materials Science and Engineering: A648: 340-349
Dong, J.; Li, C.; Liu, C.; Huang, Y.; Yu, L.; Li, H.; Liu, Y. 2017: Microstructural and mechanical properties development during quenching-partitioning-tempering process of Nb-V-Ti microalloyed ultra-high strength steel. Materials Science and Engineering: A705: 249-256
Srinivasan, S.; babu, S.K. 2020: Microstructural and mechanical properties elucidation on VAL12 aerospace alloy tailored with La2O3 dispersoids fabricated by squeeze casting technique for tribological applications. Materials Today: Proceedings 22: 1582-1589
Makeshkumar, M.; Surender, S.; Arunprakash, S.; Madesh, R.; Sasi Kumar, M.; Sudharsan, K. 2021: Microstructural and mechanical properties evaluation of dissimilar aluminum alloy and bronze joints using friction stir welding. Materials Today: Proceedings 47: 5239-5244
El-Morsy, A.; Ismail, A.; Waly, M. 2008: Microstructural and mechanical properties evolution of magnesium AZ61 alloy processed through a combination of extrusion and thermomechanical processes. Materials Science and Engineering: A486(1-2): 528-533
Tchuente, F.M.; Tchakouté, H.K.; Banenzoué, C.; Rüscher, C.H.; Kamseu, E.; Andreola, F.; Leonelli, C. 2019: Microstructural and mechanical properties of (Ca, Na)-poly(sialate-siloxo) from metakaolin as aluminosilicate and calcium silicate from precipitated silica and calcined chicken eggshell. Construction and Building Materials 201: 662-675
Montazeri-Pour, M.; Parsa, M.; Jafarian, H.; Taieban, S. 2015: Microstructural and mechanical properties of AA1100 aluminum processed by multi-axial incremental forging and shearing. Materials Science and Engineering: A639: 705-716
Jayalakshmi, S.; Nguyen, Q.; Gupta, M. 2012: Microstructural and mechanical properties of AZ31 magnesium alloy with Cr addition and CO2 incorporation during processing. Materials Chemistry and Physics 134(2-3): 721-727
Rajasekhar, K.; Suresh Babu, V.; Davidson, M. 2021: Microstructural and mechanical properties of Al-Cu functionally graded materials fabricated by powder metallurgy method. Materials Today: Proceedings 41: 1156-1159
Vemoori, R.; Khanra, A.K. 2021: Microstructural and mechanical properties of Al2O3 and ZTA foams prepared by thermo-foaming technique. Ceramics International 47(21): 29881-29887
Salehi, A.; Babakhani, A.; Zebarjad, S.M. 2015: Microstructural and mechanical properties of Al–Si O2 nanocomposite foams produced by an ultrasonic technique. Materials Science and Engineering: A638: 54-59
Venukumar, S.; Sarkar, P.; Sashank, J.S.; Sampath, P.; Saikiran, K. 2018: Microstructural and mechanical properties of Inconel 718 TIG weldments. Materials Today: Proceedings 5(2): 8480-8485
Moshokoa, N.; Raganya, L.; Obadele, B.A.; Machaka, R.; Makhatha, M.E. 2020: Microstructural and mechanical properties of Ti-Mo alloys designed by the cluster plus glue atom model for biomedical application. International Journal of Advanced Manufacturing Technology 111(5-6): 1237-1246
Liu, H.; Fujii, H. 2018: Microstructural and mechanical properties of a beta-type titanium alloy joint fabricated by friction stir welding. Materials Science and Engineering: A711: 140-148
Gogebakan, M.; Kursun, C.; Gunduz, K.O.; Tarakci, M.; Gencer, Y. 2015: Microstructural and mechanical properties of binary Ni–Si eutectic alloys. Journal of Alloys and Compounds 643: S219-S225
Čapek, J.; Vojtěch, D.; Oborná, A. 2015: Microstructural and mechanical properties of biodegradable iron foam prepared by powder metallurgy. Materials-Design 83: 468-482
R, I.; Tak, M.; L, V.; S, S. 2020: Microstructural and mechanical properties of complex phase steel to aluminium alloy welded dissimilar joint. Procedia Manufacturing 48: 267-272
Madhesh, D.; Jagatheesan, K.; Sathish, T.; Balamanikandasuthan, K. 2021: Microstructural and mechanical properties of copper matrix composites. Materials Today: Proceedings 37: 1437-1441
Daniolos, N.M.; Pantelis, D.I. 2016: Microstructural and mechanical properties of dissimilar friction stir welds between AA6082-T6 and AA7075-T651. International Journal of Advanced Manufacturing Technology 88(9-12): 2497-2505
Siron, O.; Chollon, G.; Tsuda, H.; Yamauchi, H.; Maeda, K.; Kosaka, K. 2000: Microstructural and mechanical properties of filler-added coal-tar pitch-based C/C composites: the damage and fracture process in correlation with AE waveform parameters. Carbon 38(9): 1369-1389
Habibnia, M.; Shakeri, M.; Nourouzi, S.; Givi, M.K.B. 2014: Microstructural and mechanical properties of friction stir welded 5050 Al alloy and 304 stainless steel plates. International Journal of Advanced Manufacturing Technology 76(5-8): 819-829
Ma, W.; Xie, Y.; Chen, C.; Fukanuma, H.; Wang, J.; Ren, Z.; Huang, R. 2019: Microstructural and mechanical properties of high-performance Inconel 718 alloy by cold spraying. Journal of Alloys and Compounds 792: 456-467
Tan, Y.; Cai, H.; Cheng, X.; Ma, Z.; Xu, Z.; Zhou, Z. 2018: Microstructural and mechanical properties of in-situ micro-laminated Ti C/Ti composite synthesised. Materials Letters 228: 1-4
Mousalou, H.; Yazdani, S.; Avishan, B.; Ahmadi, N.P.; Chabok, A.; Pei, Y. 2018: Microstructural and mechanical properties of low-carbon ultra-fine bainitic steel produced by multi-step austempering process. Materials Science and Engineering: A734: 329-337
Mansoor, P.; Dasharath, S. 2020: Microstructural and mechanical properties of magnesium alloy processed by severe plastic deformation (SPD) – a review. Materials Today: Proceedings 20: 145-154
Manikandan, V.; Kishore Kumar, P.; Deepak Raj, P.; Sridharan, M. 2016: Microstructural and mechanical properties of magnetron sputtered Si Ox Ny thin films. Materials Today: Proceedings 3(6): 1531-1535
Hyun Lee, S.; Moon, K.I.; Seon Hong, H.; Sub Lee, K. 2003: Microstructural and mechanical properties of nanocrystalline (Al+12.5 at.%Cu)3Zr alloys synthesized by planetary ball milling and spark plasma sintering. Intermetallics 11(10): 1039-1045
Pandey, K.K.; Singh, S.; Choudhary, S.; Zhang, C.; Agarwal, A.; Li, L.H.; Chen, Y.; Keshri, A.K. 2021: Microstructural and mechanical properties of plasma sprayed boron nitride nanotubes reinforced alumina coating. Ceramics International 47(7): 9194-9202
Zhuang, Y.; Lin, T.; Wang, S.; He, P.; Sekulic, D.; Jia, D. 2017: Microstructural and mechanical properties of porous Si 3 N 4 carbon coated ceramic brazed with a cobalt-silicon filler. Journal of the European Ceramic Society 37(10): 3293-3301
Deyong, L.; Tremblay, R.; Angers, R. 1990: Microstructural and mechanical properties of rapidly solidified CuNiSn alloys. Materials Science and Engineering: A124(2): 223-231
Rezaei Ashtiani, H.R.; Zarandooz, R. 2015: Microstructural and mechanical properties of resistance spot weld of Inconel 625 supper alloy. International Journal of Advanced Manufacturing Technology 84(1-4): 607-619
Chawla, V.; Jayaganthan, R.; Chandra, R. 2010: Microstructural and mechanical properties of sputter deposited Ti N/Si Nx multilayer thin films. Materials Chemistry and Physics 122(2-3): 424-430
Msomi, V.; Mabuwa, S.; Merdji, A.; Muribwathoho, O.; Motshwanedi, S.S. 2021: Microstructural and mechanical properties of submerged multi-pass friction stir processed AA6082/AA8011 TIG-welded joint. Materials Today: Proceedings 45: 5702-5705
Umeda, J.; Kawakami, M.; Kondoh, K.; Ayman, E.; Imai, H. 2010: Microstructural and mechanical properties of titanium particulate reinforced magnesium composite materials. Materials Chemistry and Physics 123(2-3): 649-657
Aparicio, S.; Martínez-Ramírez, S.; Ranz, J.; Fuente, J.; Hernández, M. 2016: Microstructural and mechanical properties study of the curing process of self-compacting concrete. Materials-Design 94: 479-486
Lee, J.; Yang, W.; Yoo, W.; Cho, K. 2009: Microstructural and mechanical property changes in HK40 reformer tubes after long term use. Engineering Failure Analysis 16(6): 1883-1888
Ullah, I.; Zhang, S.; Zhang, Q.; Li, B. 2021: Microstructural and mechanical property investigation of machined surface layer in high-speed milling of Ti-6Al-4V alloy. International Journal of Advanced Manufacturing Technology 116(5-6): 1707-1719
Sethi, D.; Acharya, U.; Medhi, T.; Shekhar, S.; Roy, B.S. 2021: Microstructural and mechanical property of friction stir welded Al7075/Ti B2 aluminium matrix composite. Materials Today: Proceedings 46: 9180-9186
Zou, J.; Ma, L.; Jia, W.; Le, Q.; Qin, G.; Yuan, Y. 2021: Microstructural and mechanical response of ZK60 magnesium alloy subjected to radial forging. Journal of Materials Science-Technology 83: 228-238
Mishra, M.; Iqbal, M.M.; Arka, G. N.; Singh, S. 2021: Microstructural and mechanical studies of multi-walled CNTs/Mg composite fabricated through FSP. Journal of Composite Materials 55(22): 3023-3033
Muñoz, J.A.; Higuera, O.F.; Cabrera, J.M. 2017: Microstructural and mechanical study in the plastic zone of ARMCO iron processed by ECAP. Materials Science and Engineering: A697: 24-36
Kumar, A.; Yeasin Arafath, M.; Gupta, P.; Kumar, D.; Mustansar Hussain, C.; Jamwal, A. 2020: Microstructural and mechano-tribological behavior of Al reinforced Si C-Ti C hybrid metal matrix composite. Materials Today: Proceedings 21: 1417-1420
Grevey, D.; Vignal, V.; Bendaoud, I.; Erazmus-Vignal, P.; Tomashchuk, I.; Daloz, D.; Sallamand, P. 2015: Microstructural and micro-electrochemical study of a tantalum–titanium weld interface. Materials-Design 87: 974-985
Kim, J.; Tasan, C.C. 2019: Microstructural and micro-mechanical characterization during hydrogen charging: An in situ scanning electron microscopy study. International Journal of Hydrogen Energy 44(12): 6333-6343
Gloc, M.; Wachowski, M.; Plocinski, T.; Kurzydlowski, K.J. 2016: Microstructural and microanalysis investigations of bond titanium grade1/low alloy steel st52-3N obtained by explosive welding. Journal of Alloys and Compounds 671: 446-451
Baudı́n, C.; Villar, M. 2002: Microstructural and microchemical analysis of thecreep damage in mullite tested in flexure. Journal of the European Ceramic Society 22(14-15): 2647-2655
Singh, J.; Purdy, G.R.; Weatherly, G.C. 1985: Microstructural and microchemical aspects of the solid-state decomposition of delta ferrite in austenitic stainless steels. Metallurgical Transactions A 16(8): 1363-1369
Sundgren, J.; Rockett, A.; Greene, J.E.; Helmersson, U. 1986: Microstructural and microchemical characterization of hard coatings. Journal of Vacuum Science-Technology A: Vacuum, Surfaces, and Films 4(6): 2770-2783
Clausen, C.; Bagger, C.; Bildesorensen, J.; Horsewell, A. 1994: Microstructural and microchemical characterization of the interface between La0.85Sr0.15Mn O3 and Y2O3-stabilized Zr O2. Solid State Ionics 70-71: 59-64
Brager, H.; Garner, F. 1983: Microstructural and microchemical comparisons of AISi 316 irradiated in HFIR and EBR-Ii. Journal of Nuclear Materials 117: 159-176
Buytoz, S.; Yildirim, M.M.; Eren, H. 2005: Microstructural and microhardness characteristics of gas tungsten are synthesized Fe–Cr–C coating on AISi 4340. Materials Letters 59(6): 607-614
Chang, J.; Liu, T.; Chou, J.; Hsieh, R.; Lee, J. 2010: Microstructural and microhardness characteristics of induction melted nickel-based alloys. Materials Chemistry and Physics 120(2-3): 702-708
Nagarathnam, K.; Komvopoulos, K. 1995: Microstructural and microhardness characteristics of laser-synthesized Fe-Cr-W-C Coatings. Metallurgical and Materials Transactions A 26(8): 2131-2139
Srivastava, M.; Rathee, S. 2021: Microstructural and microhardness study on fabrication of Al 5059/Si C composite component via a novel route of friction stir additive manufacturing. Materials Today: Proceedings 39: 1775-1780
Dunin-Borkowski, R.E.; McCartney, M.R.; Smith, D.J.; Gider, S.; Runge, B.; Parkin, S.S.P. 1999: Microstructural and micromagnetic characterization of thin film magnetic tunnel junctions. Journal of Applied Physics 85(8): 4815-4817
Gebhard, S.; Pyczak, F.; Göken, M. 2009: Microstructural and micromechanical characterisation of Ti Al alloys using atomic force microscopy and nanoindentation. Materials Science and Engineering: A523(1-2): 235-241
Cakmak, E.; Kirka, M.M.; Watkins, T.R.; Cooper, R.C.; An, K.; Choo, H.; Wu, W.; Dehoff, R.R.; Babu, S.S. 2016: Microstructural and micromechanical characterization of IN718 theta shaped specimens built with electron beam melting. Acta Materialia 108: 161-175
Tumbajoy-Spinel, D.; Maeder, X.; Guillonneau, G.; Sao-Joao, S.; Descartes, S.; Bergheau, J.; Langlade, C.; Michler, J.; Kermouche, G. 2018: Microstructural and micromechanical investigations of surface strengthening mechanisms induced by repeated impacts on pure iron. Materials-Design 147: 56-64
Leary, R.K.; Merson, E.; Birmingham, K.; Harvey, D.; Brydson, R. 2010: Microstructural and microtextural analysis of Inter Pulse GTCAW welds in Cp-Ti and Ti–6Al–4V. Materials Science and Engineering: A527(29-30): 7694-7705
O'Connor, J.; Jenkins, A.; Dew-Hughes, D.; Goringe, M.; Grovenor, C. 1997: Microstructural and microwave characterisation of low temperature processed Tl/sub 2/Ba/sub 2/Ca/sub 1/Cu/sub 2/O/sub x/ thin films. IEEE Transactions on Appiled Superconductivity 7(2): 1899-1902
Zitani, M.K.; Ebadzadeh, T.; Banijamali, S.; Riahifar, R.; Rüssel, C.; Zscheckel, T.; Ren, H. 2018: Microstructural and microwave dielectric properties of LZT (Li2Zn Ti3O8) ceramics sintered in presence of bismuth borate glass for LTCC applications. Ceramics International 44(4): 4016-4026
Shahgholi, N.; Asadian, K.; Ebadzadeh, T. 2014: Microstructural and microwave dielectric properties of Zn Nb2O6 ceramics prepared through microwave sintering. Ceramics International 40(9): 14335-14339
Hill, A. 2002: Microstructural and molecular level characterisation of plastic crystal phases of pyrrolidinium trifluoromethanesulfonyl salts. Solid State Ionics 154-155: 119-124
Del Vecchio, A.; De Riccardis, M.F.; Tapfer, L.; Camerlingo, C.; Russo, M. 2000: Microstructural and morphological analysis of ultrathin YBa2Cu3O7−x films grown by modulated magnetron sputtering on Sr Ti O3 substrates. Journal of Vacuum Science-Technology A: Vacuum, Surfaces, and Films 18(3): 802-808
Pragatheeswaran, A.; Ravi, R.; Bakshi, S.R. 2019: Microstructural and morphological changes during ball milling of Copper-Silver-Graphite flake mixtures. Advanced Powder Technology 30(11): 2759-2767
Hsiue, G.; Kuo, W.; Huang, Y.; Jeng, R. 2000: Microstructural and morphological characteristics of PS–Si O2 nanocomposites. Polymer 41(8): 2813-2825
Schneider, J.M.; Voevodin, A.A.; Rebholz, C.; Matthews, A. 1995: Microstructural and morphological effects on the tribological properties of electron enhanced magnetron sputtered hard coatings. Journal of Vacuum Science-Technology A: Vacuum, Surfaces, and Films 13(4): 2189-2193
Nath, S.; Maitra, S.; Mukherjee, S.; Kumar, S. 2016: Microstructural and morphological evolution of fly ash based geopolymers. Construction and Building Materials 111: 758-765
Gajdics, M.; Spassov, T.; Kis, V.K.; Schafler, E.; Révész, . 2020: Microstructural and morphological investigations on Mg-Nb2O5-CNT nanocomposites processed by high-pressure torsion for hydrogen storage applications. International Journal of Hydrogen Energy 45(14): 7917-7928
Chen, L.; Deng, H.; Zhang, Q.; Yu, J.; Tao, J.; Sun, L.; Yang, P.; Chu, J. 2017: Microstructural and morphological properties of spin-coated Cu 2 Mn Sn(S,Se) 4 thin films for solar cell applications. Materials Letters 206: 249-252
Cao, H.; Deng, H.; Tao, J.; Zhou, W.; Meng, X.; Sun, L.; Yang, P.; Chu, J. 2015: Microstructural and morphological properties of sputtered Cu(In, Al)Se2 thin films for solar cell applications. Materials Letters 157: 42-44
Cheng, X.; Ma, C.; Wang, X.; Meng, D.; Song, J.; Yang, H.; Ruan, K. 2016: Microstructural and multiferroic properties in layered perovskite-related Sm6Ti4Fe2O20. Ceramics International 42(12): 13642-13647
Shankar, M.V.; Varma, K.B.R.; Sharma, G.V.R.; Srikrishna, A.; Prasad, B.R.; Subramaniam, C.K.; Narayanan, P.S. 1994: Microstructural and non-linear optical properties of hot-pressed ethoxy methoxy chalcone (EMC). Ferroelectrics 156(1): 141-146
Chrunik, M.; Majchrowski, A.; Szala, M.; Zasada, D.; Kroupa, J.; Bubnov, A.; Chlanda, A.; Woźniak, M. 2017: Microstructural and nonlinear optical properties of Bi2Zn B2O7:RE3+ powders. Journal of Alloys and Compounds 694: 959-970
Martucci, A.; Fick, J.; Schell, J.; Battaglin, G.; Guglielmi, M. 1999: Microstructural and nonlinear optical properties of silica–titania sol-gel film doped with Pb S quantum dots. Journal of Applied Physics 86(1): 79-87
Maurera, M.; Souza, A.; Soledade, L.; Pontes, F.; Longo, E.; Leite, E.; Varela, J. 2004: Microstructural and optical characterization of Ca WO4 and Sr WO4 thin films prepared by a chemical solution method. Materials Letters 58(5): 727-732
Allen, C.; Shih, G.; Potter Jr., B. 2010: Microstructural and optical characterization of germanium:indium tin oxide (Ge:ITO) nanocomposite films. Materials Science and Engineering: B175(2): 150-158
Hu, Z.; Li, Y.; Zhu, M.; Zhu, Z.; Chu, J. 2008: Microstructural and optical investigations of sol–gel derived ferroelectric Ba Ti O3 nanocrystalline films determined by spectroscopic ellipsometry. Physics Letters A 372(24): 4521-4526
Sahu, D.; Panda, N.; Acharya, B.; Panda, A. 2014: Microstructural and optical investigations on sonochemically synthesized Cu doped Zn O nanobricks. Ceramics International 40(7): 11041-11049
Dalui, S.; Pal, A. 2008: Microstructural and optical properties of BN films deposited by inductively coupled plasma CVD. Vacuum 82(11): 1296-1301
Tsay, C.; Wu, C.; Lei, C.; Chen, F.; Lin, C. 2010: Microstructural and optical properties of Ga-doped Zn O semiconductor thin films prepared by sol–gel process. Thin Solid Films 519(5): 1516-1520
Kim, T.W.; Lee, D.U.; Choo, D.C.; Yoon, Y.S. 2001: Microstructural and optical properties of Sn O2 thin films grown on heavily doped n-in P(100) substrates. Applied Physics Letters 79(14): 2187-2189
Saafi, I.; Dridi, R.; Mimouni, R.; Amlouk, A.; Yumak, A.; Boubaker, K.; Petkova, P.; Amlouk, M. 2016: Microstructural and optical properties of Sn O2–Zn Sn O3 ceramics. Ceramics International 42(5): 6273-6281
Wu, Y.; Li, C.; Li, M.; Li, H.; Xu, S.; Wu, X.; Yang, B. 2016: Microstructural and optical properties of Ta-doped Zn O films prepared by radio frequency magnetron sputtering. Ceramics International 42(9): 10847-10853
Kim, T.; Lee, D.; Choo, D.; Lee, J.; Jung, M.; Cho, J.; Seo, K.; Yoon, Y. 2001: Microstructural and optical properties of Zn O thin films grown on in Sb (111) substrates. Journal of Physics and Chemistry of Solids 62(7): 1199-1203
Gao, F.; Tan, L.X.; Wu, Z.H.; Liu, X.Y. 2009: Microstructural and optical properties of Zn O/(Ni) thin films prepared by DC magnetron sputtering. Journal of Alloys and Compounds 484(1-2): 489-493
Boukadhaba, M.; Chebil, W.; Fouzri, A.; Sallet, V.; Lusson, A.; Sartel, C.; Oumezzine, M. 2015: Microstructural and optical properties of Zn(1−x)Cdx O thin films grown on r-plane sapphire substrates: Effect of growth temperature and position of sample in MO-CVD reactor. Ceramics International 41(1): 1677-1685
Atuchin, V.; Kruchinin, V.; Hoong Wong, Y.; Yew Cheong, K. 2013: Microstructural and optical properties of Zr ON/Si thin films. Materials Letters 105: 72-75
Zhao, Z.W.; Tay, B.K.; Lau, S.P.; Xiao, C.Y. 2003: Microstructural and optical properties of aluminum oxide thin films prepared by off-plane filtered cathodic vacuum arc system. Journal of Vacuum Science-Technology A: Vacuum, Surfaces, and Films 21(4): 906-910
Al Rifai, S.; Kulnitskiy, B. 2013: Microstructural and optical properties of europium-doped zinc oxide nanowires. Journal of Physics and Chemistry of Solids 74(12): 1733-1738
Chen, C.; Yan, T.; Yu, S.; Lee, C.; Chang, C.; Chou, M.M.C. 2015: Microstructural and optical properties of high-quality Zn O epitaxially grown on a Li Ga O2 substrate. RSC Advances 5(45): 35405-35411
Lee, H.S.; Lee, J.Y.; Kim, T.W.; Lee, D.U.; Choo, D.C.; Jung, M.; Kim, M.D. 2002: Microstructural and optical properties of in As/Ga as quantum dots embedded in modulation-doped Alx Ga1−x As/Ga as heterostructures. Journal of Applied Physics 91(8): 5195-5199
Kim, T.; Kim, M. 2004: Microstructural and optical properties of multiple closely stacked in As/Ga as self-assembled quantum dot arrays. Journal of Physics and Chemistry of Solids 65(5): 927-931
Borkar, T.; Chang, W.S.; Hwang, J.Y.; Shepherd, N.D.; Banerjee, R. 2012: Microstructural and optical properties of nanocrystalline Zn O deposited onto vertically aligned carbon nanotubes by physical vapor deposition. Materials Research Bulletin 47(10): 2756-2759
Brusatin, G.; Guglielmi, M.; Innocenzi, P.; Martucci, A.; Battaglin, G.; Pelli, S.; Righini, G. 1997: Microstructural and optical properties of sol-gel silica-titania waveguides. Journal of Non-Crystalline Solids 220(2-3): 202-209
Le, T.L.; Guillemet-Fritsch, S.; Dufour, P.; Tenailleau, C. 2016: Microstructural and optical properties of spinel oxide Mx Co2−x Mn O4 (M= Ni, Zn or Cu; 0 < x < 1) thin films prepared by inorganic polycondensation and dip-coating methods. Thin Solid Films 612: 14-21
Kim, T.; Lee, D.; Choo, D. 2002: Microstructural and optical properties of strain compensated Inx Ga1−x As/Iny Al1−y as multiple quantum wells. Journal of Physics and Chemistry of Solids 63(1): 89-93
Lee, K.; Choi, B.; Woo, J.; Kang, J.; Paik, J.; Chu, B.; Nahm, S. 2018: Microstructural and optical properties of the Zn S ceramics sintered by vacuum hot-pressing using hydrothermally synthesized Zn S powders. Journal of the European Ceramic Society 38(12): 4237-4244
Yancheshmeh, D.A.; Esmailian, M.; Shirvani, K. 2018: Microstructural and oxidation behavior of Ni Cr Al super alloy containing hafnium at high temperature. International Journal of Hydrogen Energy 43(10): 5365-5373
Cunningham, J.; Cullinane, D.; Farrell, F.; O'Driscoll, J.P.; Morris, M.A. 1995: Microstructural and oxygen-handling characteristics of Ce O2with M3+promoters. Part 1.- Characterization of calcined powders by XRD and oxygen-isotope exchange. J. Mater. Chem. 5(7): 1027-1033
Buršı́k, J.; Brož, P.; Picha, R. 2003: Microstructural and phase equilibria study in the Ni–Al–Cr–W system at 1173 and 1273 K. Intermetallics 11(5): 483-490
Rezaei-Shahreza, P.; Seifoddini, A.; Hasani, S. 2018: Microstructural and phase evolutions: their dependent mechanical and magnetic properties in a Fe-based amorphous alloy during annealing process. Journal of Alloys and Compounds 738: 197-205
Ergul, S.; Sappa, G.; Magaldi, D.; Pisciella, P.; Pelino, M. 2011: Microstructural and phase transformations during sintering of a phillipsite rich zeolitic tuff. Ceramics International 37(6): 1843-1850
Sahoo, T.; Tripathy, S.; Nandy, S.; Pandey, B.; Verma, H.; Chattopadhyay, K.; Anand, S. 2006: Microstructural and photo luminescence studies on hydrothermally synthesized Ce-doped barium titanate nanocrystals. Materials Science and Engineering: B131(1-3): 277-280
Srikanth, K.; Kushwaha, H.; Vaish, R. 2018: Microstructural and photocatalytic performance of Ba Ce x Ti 1−x O 3 ceramics. Materials Science in Semiconductor Processing 73: 51-57
Chen, D.; Zhu, Q.; Lv, Z.; Deng, X.; Zhou, F.; Deng, Y. 2012: Microstructural and photocatatlytic properties of Eu-doped mesporous titanium dioxide nanopaticles by sol–gel method. Materials Research Bulletin 47(11): 3129-3134
Li, F.; Wang, Y.; Xia, K.; Hoye, R.L.Z.; Pecunia, V. 2020: Microstructural and photoconversion efficiency enhancement of compact films of lead-free perovskite derivative Rb3Sb2I9. Journal of Materials Chemistry A 8(8): 4396-4406
Choi, W.K.; Ho, Y.W.; Ng, S.P.; Ng, V. 2001: Microstructural and photoluminescence studies of germanium nanocrystals in amorphous silicon oxide films. Journal of Applied Physics 89(4): 2168-2172
Chakrabarti, S.; Chaudhuri, S. 2004: Microstructural and photoluminescent characterization of one-dimensional Zn O nanostructures prepared by catalyst-assisted vapour–liquid–solid technique. Materials Chemistry and Physics 87(1): 196-200
Gencer, A.; Ate§, A.; Aksu, E.; Nezir, S.; Celebi, S.; Yanmaz, E. 1997: Microstructural and physical properties of YBa2Cu3O&−δ superconductors prepared by the flame-quench-melt-growth (FQMG) method. Physica C: Superconductivity 279(3-4): 165-172
Laffez, P.; Tendeloo, G.V.; Seshadri, R.; Hervieu, M.; Martin, C.; Maignan, A.; Raveau, B. 1996: Microstructural and physical properties of layered manganites oxides related to the magnetoresistive perovskites. Journal of Applied Physics 80(10): 5850-5856
Sirota, V.; Lukianova, O.; Krasilnikov, V.; Selemenev, V.; Dokalov, V. 2016: Microstructural and physical properties of magnesium oxide-doped silicon nitride ceramics. Results in Physics 6: 82-83
Moure, C.; Villegas, M.; Fernández, J.F.; Durán, P. 1992: Microstructural and piezoelectric properties of fine grained PZT ceramics doped with donor and/or acceptor cations. Ferroelectrics 127(1): 113-118
Yoo, J.; Lee, C.; Jeong, Y.; Chung, K.; Lee, D.; Paik, D. 2005: Microstructural and piezoelectric properties of low temperature sintering PMN-PZT ceramics with the amount of Li2CO3 addition. Materials Chemistry and Physics 90(2-3): 386-390
De Frutos, J.; Calzada, M.L.; Jimenez, B.; Menendez, E. 1992: Microstructural and poling studies in ferroelectric ceramics of pure lead titanate. Ferroelectrics 126(1): 347-352
Isasti, N.; Jorge-Badiola, D.; Taheri, M.L.; Uranga, P. 2014: Microstructural and precipitation characterization in Nb-Mo microalloyed steels: Estimation of the contributions to the strength. Metals and Materials International 20(5): 807-817
Wei, C.; Ma, X.; Yang, X.; Zhou, M.; Wang, C.; Zheng, Y.; Zhang, W.; Li, Z. 2018: Microstructural and property evolution of Ti6Al4V powders with the number of usage in additive manufacturing by electron beam melting. Materials Letters 221: 111-114
Negrini, M.; Smith, S.A.; Scott, J.M.; Tarling, M.S. 2018: Microstructural and rheological evolution of calcite mylonites during shear zone thinning: Constraints from the Mount Irene shear zone, Fiordland, New Zealand. Journal of Structural Geology 106: 86-102
Cannone Falchetto, A.; Montepara, A.; Tebaldi, G.; Marasteanu, M.O. 2012: Microstructural and rheological investigation of asphalt mixtures containing recycled asphalt materials. Construction and Building Materials 35: 321-329
Septimio, R.; Cruz, C.; Silva, B.; Garcia, A.; Spinelli, J.E.; Cheung, N. 2021: Microstructural and segregation effects affecting the corrosion behavior of a high‐temperature Bi‐Ag solder alloy in dilute chloride solution. Journal of Applied Electrochemistry 51(5): 769-780
Jovanović, M.T.; Bobić, I.; Djurić, B.; Grahovac, N.; Ilić, N. 2006: Microstructural and sliding wear behaviour of a heat-treated zinc-based alloy. Tribology Letters 25(3): 173-184
Jeon, D.; Jun, Y.; Jeong, Y.; Oh, J.E. 2015: Microstructural and strength improvements through the use of Na 2 CO 3 in a cementless Ca(OH) 2 -activated Class F fly ash system. Cement and Concrete Research 67: 215-225
Prasad Bhatta, D.; Singla, S.; Garg, R. 2021: Microstructural and strength parameters of Nano-Si O2 based cement composites. Materials Today: Proceedings 46: 6743-6747
Durai, G.; Kuppusami, P.; Theerthagiri, J. 2018: Microstructural and supercapacitive properties of reactive magnetron co-sputtered Mo 3 N 2 electrodes: Effects of Cu doping. Materials Letters 220: 201-204
Babaoğlu, M.G.; Safran, S.; Çiçek, .; Ağıl, H.; Ertekin, E.; Hossain, M.A.; Yanmaz, E.; Gencer, A. 2012: Microstructural and superconducting properties of C6H6 added bulk Mg B2 superconductor. Journal of Magnetism and Magnetic Materials 324(21): 3455-3459
Chua, D.H.C.; Milne, W.I.; Tay, B.K.; Zhang, P.; Ding, X.Z. 2003: Microstructural and surface properties of cobalt containing amorphous carbon thin film deposited by a filtered cathodic vacuum arc. Journal of Vacuum Science-Technology A: Vacuum, Surfaces, and Films 21(2): 353-358
Kabakci, E.; Capoglu, A. 2019: Microstructural and technological investigation of bone China reformulated with nepheline syenite and quartz addition. International Journal of Applied Ceramic Technology 17(3): 1128-1140
Zheng, J.; Li, C.; He, S.; Cai, B.; Song, Y. 2016: Microstructural and tensile behavior of Fe-36%Ni alloy after cryorolling and subsequent annealing. Materials Science and Engineering: A670: 275-279
Kumar Gupta, T.; Kumar Srivastava, A.; Shankar Srivastava, V. 2021: Microstructural and tensile behaviour of hybrid MMC Al7075/ Si C/B4C produced by mechanical stir casting. Materials Today: Proceedings 47: 4107-4113
Ali, B.; Sabri, M.F.M.; Said, S.M.; Sukiman, N.L.; Jauhari, I.; Mahdavifard, M.H. 2018: Microstructural and tensile properties of Fe and Bi added Sn-1Ag-0.5Cu solder alloy under high temperature environment. Microelectronics Reliability 82: 171-178
Saha, R.; Ray, R. 2007: Microstructural and textural changes in a severely cold rolled boron-added interstitial-free steel. Scripta Materialia 57(9): 841-844
Jha, S.; Keskar, N.; Vishnu Narayan, K.; Mani Krishna, K.; Srivastava, D.; Dey, G.; Saibaba, N. 2016: Microstructural and textural evolution during hot deformation of dilute Zr-Sn alloy. Journal of Nuclear Materials 482: 12-18
Schuster, R.; Habler, G.; Schafler, E.; Abart, R. 2019: Microstructural and textural evolution of calcite deformed to high shear strain by high-pressure torsion. Journal of Structural Geology 118: 32-47
Chai, L.; Luan, B.; Xiao, D.; Zhang, M.; Murty, K.L.; Liu, Q. 2015: Microstructural and textural evolution of commercially pure Zr sheet rolled at room and liquid nitrogen temperatures. Materials-Design 85: 296-308
Ren, Y.; Zhang, X.; Xia, T.; Sun, Q.; Liu, Q. 2017: Microstructural and textural evolution of high-purity titanium under dynamic loading. Materials-Design 126: 123-134
Jiang, S.; Peng, R.L.; Jia, N.; Zhao, X.; Zuo, L. 2019: Microstructural and textural evolutions in multilayered Ti/Cu composites processed by accumulative roll bonding. Journal of Materials Science-Technology 35(6): 1165-1174
Pérez, M. 2018: Microstructural and texture evolution of Jethete M152 flanged-test pieces during cold rotary forging. Journal of Materials Processing Technology 252: 582-594
Wang, T.; Lee, H.; Chen, C.; Chen, M.; Hu, C.; Chen, Y.; Horng, R. 2016: Microstructural and thermal characterizations of light-emitting diode employing a low-temperature die-bonding material. Microelectronics Reliability 63: 68-75
Upadhyay, A.; Tiwari, R.; Singh, K. 2016: Microstructural and thermal investigations of carbon nanotube additive Se 80 Te 16 Cu 4 glassy composites. Materials Letters 164: 449-451
Heidarian, J.; Hassan, A. 2015: Microstructural and thermal properties of fluoroelastomer/acidic surface modified carbon nanotube nanocomposites. Polymer Composites 37(12): 3341-3353
Heidarian, J.; Hassan, A. 2014: Microstructural and thermal properties of fluoroelastomer/carbon nanotube composites. Composites Part B: Engineering 58: 166-174
Di Girolamo, G.; Blasi, C.; Pilloni, L.; Schioppa, M. 2010: Microstructural and thermal properties of plasma sprayed mullite coatings. Ceramics International 36(4): 1389-1395
Zhang, Y.; Hsu, C.; Aubuchon, S.; Karandikar, P.; Ni, C. 2018: Microstructural and thermal property evolution of reaction bonded silicon carbide (RBSC). Journal of Alloys and Compounds 764: 107-111
Confalonieri, C.; Bassani, P.; Gariboldi, E. 2020: Microstructural and thermal response evolution of metallic form-stable phase change materials produced from ball-milled powders. Journal of Thermal Analysis and Calorimetry 142(1): 85-96
Saqib, M.; Weiss, I.; Mehrotra, G.M.; Clevenger, E.; Jackson, A.G.; Lipsitt, H.A. 1991: Microstructural and thermal stability of a Ti-43Ai alloy containing dispersoids of titanium di-boride. Metallurgical Transactions A 22(8): 1722-1728
Abdulwahab, M.; Umaru, O.; Bawa, M.; Jibo, H. 2017: Microstructural and thermal study of Al-Si-Mg/melon shell ash particulate composite. Results in Physics 7: 947-954
Lingamanaik, S.N.; Chen, B.K. 2014: Microstructural and thermo-mechanical analysis of quench cracking during the production of bainitic–martensitic railway wheels. Engineering Failure Analysis 40: 25-32
Lee, T.; Sun, J.; Nersisyan, H.; Jung, H.; Lee, K.; Lee, J. 2012: Microstructural and thermochemical properties of Al/Al N/Cu Al2 composite prepared by a combination of combustion synthesis and spark plasma sintering. Composites Part A: Applied Science and Manufacturing 43(9): 1490-1496
Presečnik, M.; Bernik, S. 2016: Microstructural and thermoelectric properties of WO3-doped Ca3Co4O9 ceramics. Ceramics International 42(14): 16103-16108
Pinto, R.; Gnanasekar, K.; Keer, H.; Tamhane, A.; Gupta, L.; Vijayaraghavan, R. 1994: Microstructural and transport properties of laser ablated Lu Ba2Cu3O7−δ thin films. Physica C: Superconductivity 227(1-2): 120-128
Li, Y.; Kim, S. 2006: Microstructural and tribological behavior of Ti Al N/Mo S2-Ti coatings. Rare Metals 25(4): 326-330
Adesina, O.S.; Popoola, A.P.I.; Pityana, S.L.; Oloruntoba, D.T. 2017: Microstructural and tribological behavior of in situ synthesized Ti/Co coatings on Ti-6Al-4V alloy using laser surface cladding technique. International Journal of Advanced Manufacturing Technology 95(1-4): 1265-1280
Grosseau-Poussard, J.; Moine, P.; Villain, J. 1993: Microstructural and tribological characterization of Mo Sx coatings produced by high-energy ion-beam-assisted deposition. Thin Solid Films 224(1): 52-57
Li, B.; Jia, J.; Gao, Y.; Han, M.; Wang, W. 2017: Microstructural and tribological characterization of Ni Al matrix self-lubricating composite coatings by atmospheric plasma spraying. Tribology International 109: 563-570
Skarvelis, P.; Papadimitriou, G. 2009: Microstructural and tribological evaluation of potential self-lubricating coatings with additions produced by the plasma transferred arc technique. Tribology International 42(11-12): 1765-1770
Rebolé, R.; Martínez, A.; Rodriguez, R.; Fuentes, G.; Spain, E.; Watson, N.; Avelar-Batista, J.; Housden, J.; Montalá, F.; Carreras, L.; Tate, T. 2004: Microstructural and tribological investigations of Cr N coated, wet-stripped and recoated functional substrates used for cutting and forming tools. Thin Solid Films 469-470: 466-471
Caliari, D.; Timelli, G.; Zabala, B.; Igartua, A. 2018: Microstructural and tribological investigations of diecast and hard anodized Al Si Cu alloys. Surface and Coatings Technology 352: 462-473
Omidi, M.; Khodabandeh, A.; Nategh, S.; Khakbiz, M. 2018: Microstructural and tribological properties of nanostructured Al6061-CNT produced by mechanical milling and extrusion. Advanced Powder Technology 29(3): 543-554
G, B.; T, E.; Yoo, S.; Kim, D.; P, K.; Babu R, V.; D, S.; il Song, J. 2017: Microstructural and tribological studies of Al2O3/Zr O2 nano multilayer thin films prepared by pulsed laser deposition. Advanced Materials Letters 8(4): 410-417
Ruiz, A.; Fuentes-Corona, K.J.; López, V.H.; León, C.A. 2017: Microstructural and ultrasonic characterization of 2101 lean duplex stainless steel welded joint. Applied Acoustics 117: 12-19
Sathishkumar, G.; Saravanan, S.; Navaneethakrishan, G.; Parkunam, N.; Yokeshwaran, R. 2020: Microstructural and wear behaviour of heat treated Cu-11Ni-6Sn alloy. Materials Today: Proceedings 21: 89-92
Spalvins, T. 1978: Microstructural and wear properties of sputtered carbides and silicides. Wear 46(1): 295-304
Brzoza, A.; Kowalczyk, M.; Wierzbicka-Miernik, A.; Czaja, P.; Maziarz, W.; Wójcik, A.; Wojewoda-Budka, J.; Sikora, M.; Dutkiewicz, J.; Szczerba, M. 2019: Microstructural anisotropy, phase composition and magnetic properties of as-cast and annealed Ni-Mn-Ga-Co-Cu melt-spun ribbons. Journal of Alloys and Compounds 776: 319-325
Liu, Y.; Iacocca, R.G.; Johnson, J.L.; German, R.M.; Kohara, S. 1995: Microstructural anomalies in a W-Ni alloy liquid phase sintered under microgravity conditions. Metallurgical and Materials Transactions A 26(9): 2484-2486
Satizabal, L.M.; Costa, D.; Moraes, P.B.; Bortolozo, A.D.; Osório, W.R. 2019: Microstructural array and solute content affecting electrochemical behavior of Sn Ag and Sn Bi alloys compared with a traditional Sn Pb alloy. Materials Chemistry and Physics 223: 410-425
Tsai, W.; Huang, K. 2000: Microstructural aspect and oxidation resistance of an aluminide coating on 310 stainless steel. Thin Solid Films 366(1-2): 164-168
Ma, Z.; Allen, L.H.; Allman, D.D.J. 1995: Microstructural aspects and mechanism of the C49‐to‐C54 polymorphic transformation in titanium disilicide. Journal of Applied Physics 77(9): 4384-4388
Carlone, P.; Astarita, A.; Palazzo, G.S.; Paradiso, V.; Squillace, A. 2015: Microstructural aspects in Al–Cu dissimilar joining by FSW. International Journal of Advanced Manufacturing Technology 79(5-8): 1109-1116
Ziegler, G. 1985: Microstructural aspects of Thermal Stress Resistance of high-strength engineering ceramics Part II: Influence of microstructure on thermal shock resistance of high-strength engineering ceramics. Materialwissenschaft und Werkstofftechnik 16(2): 45-55
Ziegler, G. 1985: Microstructural aspects of Thermal Stress Resistance of high-strength engineering ceramics. Part I: Data of thermal stress resistance of high-strength engineering ceramics. Materialwissenschaft und Werkstofftechnik 16(1): 12-18
Ziegler, G. 1985: Microstructural aspects of Thermal Stress Resistance of high-strength engineering ceramics. Part III: Improvement of thermal stress resistance of high-strength engineering ceramics. Materialwissenschaft und Werkstofftechnik 16(3): 81-88
Lloyd, D.; Lagace, H.; McLeod, A.; Morris, P. 1989: Microstructural aspects of aluminium-silicon carbide particulate composites produced by a casting method. Materials Science and Engineering: A107: 73-80
Jabłońska, M.; Kowalczyk, K. 2019: Microstructural aspects of energy absorption of high manganese steels. Procedia Manufacturing 27: 91-97
Rogachev, A.S.; Kochetov, N.A.; Kurbatkina, V.V.; Levashov, E.A.; Grinchuk, P.S.; Rabinovich, O.S.; Sachkova, N.V.; Bernard, F. 2006: Microstructural aspects of gasless combustion of mechanically activated mixtures. I. High-speed microvideorecording of the Ni-Al composition. Combustion, Explosion, and Shock Waves 42(4): 421-429
Bennetch, J.; Jesser, W. 1981: Microstructural aspects of he embrittlement in type 316 stainless steel. Journal of Nuclear Materials 104: 809-813
Mohtadi-Bonab, M.; Eskandari, M.; Sanayei, M.; Das, S. 2018: Microstructural aspects of intergranular and transgranular crack propagation in an APi X65 steel pipeline related to fatigue failure. Engineering Failure Analysis 94: 214-225
Mogilyanski, D.; Gartstein, E.; Blumin, M.; Fekete, D.; Kohler, R. 2001: Microstructural aspects of island nucleation process in elastically relaxed LPOMVPE grown In0.2Ga0.8As/Ga as multilayer. Journal of Physics D: Applied Physics 34(10A): A19-A24
Schmitz, G J.; Tigges, A.; Schmidt, J C. 1998: Microstructural aspects of joining superconductive components using solder. Superconductor Science and Technology 11(1): 73-75
Costa, A.; Quintino, L.; Miranda, R.M. 2004: Microstructural aspects of laser dissimilar welds of hard metals to steels. Journal of Laser Applications 16(4): 206-211
Padhy, S.K.; Patnaik, P.; Tripathy, B.; Bhattacharya, I. 2015: Microstructural aspects of manganese metal during its electrodeposition from sulphate solutions in the presence of quaternary amines. Materials Science and Engineering: B193: 83-90
Guimarães, J.R.C.; Gomes, J.C. 1979: Microstructural aspects of martensite transformation in coarse-grained Fe-31.1 pct Ni-0.02 pct C. Metallurgical Transactions A 10(1): 109-112
Trivedi, S.; Das, D. 2005: Microstructural aspects of plain aluminide and Pt-aluminide coatings on Ti-base alloy IMI-834. Intermetallics 13(10): 1122-1133
Gurumoorthy, K.; Kamaraj, M.; Rao, K.P.; Rao, A.S.; Venugopal, S. 2007: Microstructural aspects of plasma transferred arc surfaced Ni-based hardfacing alloy. Materials Science and Engineering: A456(1-2): 11-19
Mishnev, R.; Dudova, N.; Fedoseeva, A.; Kaibyshev, R. 2016: Microstructural aspects of superior creep resistance of a 10%Cr martensitic steel. Materials Science and Engineering: A678: 178-189
Flacher, O.; Blandin, J.; Plucknett, K.; Caceres, C.; Wilkinson, D. 1996: Microstructural aspects of superplastic deformation of Al2O3/Zr O2 laminate composites. Materials Science and Engineering: A219(1-2): 148-155
Edington, J.W. 1982: Microstructural aspects of superplasticity. Metallurgical Transactions A 13(5): 703-715
Thakare, A.S.; Butee, S.; Kambale, K. 2021: Microstructural aspects of tensile strength, toughness and wear for 34Cr Mo4 steel. Materials Today: Proceedings 43: 2985-2992
Marezio, M.; Takagi, H.; Batlogg, B.; Bordet, P.; Cox, D.; Uchida, S. 1991: Microstructural aspects of the LTO→LTT transition in La1.875Ba0.125Cu O4. Physica C: Superconductivity 185-189: 873-874
Barbosa, C.; Nascimento, J.; Caminha, I.; Abud, I. 2005: Microstructural aspects of the failure analysis of nickel base superalloys components. Engineering Failure Analysis 12(3): 348-361
Medina-Clavijo, B.; Saez-de-Buruaga, M.; Motz, C.; Soler, D.; Chuvilin, A.; Arrazola, P.J. 2018: Microstructural aspects of the transition between two regimes in orthogonal cutting of AISi 1045 steel. Journal of Materials Processing Technology 260: 87-96
Kim, T. 2005: Microstructural aspects of titanium metal matrix composites in consolidation processing. Materials Letters 59(2-3): 143-147
Fabis, P.M. 1987: Microstructural aspects of vacuum annealing‐induced solute depletion in sputter‐deposited 304 stainless‐steel films. Journal of Vacuum Science-Technology A: Vacuum, Surfaces, and Films 5(1): 75-81
Corchia, M.; Delogu, P.; Nenci, F.; Belmondo, A.; Corcoruto, S.; Stabielli, W. 1987: Microstructural aspects of wear-resistant stellite and colmonoy coatings by laser processing. Wear 119(2): 137-152
Komninou, P.; Kehagias, T.; Delimitis, A.; Dimitrakopulos, G.; Kioseoglou, J.; Dimakis, E.; Georgakilas, A.; Karakostas, T. 2004: Microstructural assessment of in N-on-Ga N films grown by plasma-assisted MBE. Superlattices and Microstructures 36(4-6): 509-515
Tasan, C.; Hoefnagels, J.; Geers, M. 2010: Microstructural banding effects clarified through micrographic digital image correlation. Scripta Materialia 62(11): 835-838
Kansal, U.; Kassner, M.E.; Hiatt, D.R.; Bristow, B.M. 1992: Microstructural banding in thermally and mechanically processed titanium 6242. Journal of Materials Engineering and Performance 1(3): 393-398
Hwa, Y.; Kumai, C.S.; Devine, T.M.; Yang, N.; Yee, J.K.; Hardwick, R.; Burgmann, K. 2021: Microstructural banding of directed energy deposition-additively manufactured 316L stainless steel. Journal of Materials Science-Technology 69: 96-105
Hao, Y.; Liu, W.; Li, J.; Nie, B.; Zhang, W.; Liu, Z. 2018: Microstructural bandings evolution behavior and their effects on microstructure and mechanical property of super-austenitic stainless steel. Materials Science and Engineering: A736: 258-268
Elban, W.L.; Sandusky, H.W.; Glancy, B.C.; Beard, B.C. 1995: Microstructural basis for enhanced shock-induced chemistry in single crystal ammonium perchlorate. Journal of Propulsion and Power 11(1): 24-31
Ayer, R.; Machmeier, P.M. 1996: Microstructural basis for the effect of chromium on the strength and toughness of AF1410-based high performance steels. Metallurgical and Materials Transactions A 27(9): 2510-2517
Zhao, B.; Awartani, O.; O'Connor, B.; Zikry, M.A. 2016: Microstructural behavior and failure mechanisms of organic semicrystalline thin film blends. Journal of Polymer Science Part B: Polymer Physics 54(9): 896-907
Suresh, R.; Murugaiyan, V. 2021: Microstructural behavior of expansive soil using calcium chloride and alccofine. Materials Today: Proceedings 46: 8397-8403
Lee, K.; Kang, N.; Bae, J.; Lee, C. 2016: Microstructural behavior of nitriding compound layer for Nb-carbonitride coating grown by thermo-reactive diffusion process. Metals and Materials International 22(5): 842-848
K, N.; V, P. 2018: Microstructural behaviour and flowing ability of self‐compacting concrete using micro‐ and nano‐silica. Micro-Nano Letters 13(8): 1213-1218
Münch, I.; Neff, P.; Wagner, W. 2008: Microstructural behaviour of transversal isotropic material. PAMM 8(1): 10559-10560
Borchers, C.; Gärtner, F.; Stoltenhoff, T.; Kreye, H. 2004: Microstructural bonding features of cold sprayed face centered cubic metals. Journal of Applied Physics 96(8): 4288-4292
Kamada, K.; Sagara, A.; Kinoshita, H.; Takahashi, H. 1988: Microstructural change and hydrogen behaviour in implanted metal. Journal of Nuclear Materials 155-157: 427-430
Chen, W.; Yan, A.; Meng, X.; Wu, D.; Yao, D.; Zhang, D. 2018: Microstructural change and phase transformation in each individual layer of a nano-multilayered Al Cr Ti Si N high-entropy alloy nitride coating upon annealing. Applied Surface Science 462: 1017-1028
Park, W.; You, B.; Moon, B.; Kim, W. 2001: Microstructural change and precipitation hardening in melt–spun Mg–X–Ca alloys. Science and Technology of Advanced Materials 2(1): 73-78
Miyajima, Y.; Komatsu, S.; Mitsuhara, M.; Hata, S.; Nakashima, H.; Tsuji, N. 2015: Microstructural change due to isochronal annealing in severely plastic-deformed commercial purity aluminium. Philosophical Magazine 95(11): 1139-1149
Park, J.; Kang, S.L.; Eun, K.Y.; Yoon, D.N. 1989: Microstructural change during liquid phase sintering of W−Ni−Fe alloy. Metallurgical Transactions A 20(5): 837-845
Maehara, Y.; Ohmori, Y. 1987: Microstructural change during superplastic deformation of δ-ferrite/austenite duplex stainless steel. Metallurgical and Materials Transactions A 18(4): 663-672
Hamaguchi, D.; Dai, Y. 2004: Microstructural change in Al Mg3 alloy irradiated by spallation neutrons and high energy protons. Journal of Nuclear Materials 329-333: 958-962
Yim, C.D.; Moon, Y.M.; You, B.S.; Na, Y.S.; Bae, J.S. 2004: Microstructural change in gravity cast Mg−Ni alloys with Ni contents. Metals and Materials International 10(6): 605-608
Murakami, Y.; Shindo, D.; Oikawa, K.; Kainuma, R.; Ishida, K. 2004: Microstructural change near the martensitic transformation in a ferromagnetic shape memory alloy Ni51Fe22Ga27 studied by electron holography. Applied Physics Letters 85(25): 6170-6172
Kim, J.W.; Friedrichs, O.; Ahn, J.; Kim, D.H.; Kim, S.C.; Remhof, A.; Chung, H.; Lee, J.; Shim, J.; Cho, Y.W.; Züttel, A.; Oh, K.H. 2009: Microstructural change of 2Li BH4/Al with hydrogen sorption cycling: Separation of Al and B. Scripta Materialia 60(12): 1089-1092
Kamada, K.; Sagara, A.; Kinoshita, H.; Takahashi, H. 1987: Microstructural change of Al on H implantation. Radiation Effects 103(1-4): 119-133
Ohara, H.; Nakayama, A.; Nomura, T. 1997: Microstructural change of Ti N films by C and B ion implantations. Journal of Vacuum Science-Technology A: Vacuum, Surfaces, and Films 15(5): 2609-2614
Yu, K.N.; Xiong, Y.; Liu, Y.; Xiong, C. 1997: Microstructural change of nano-Sn O2grain assemblages with the annealing temperature. Physical Review B 55(4): 2666-2671
Kinoshita, H.; Akasaka, N.; Takahashi, H.; Shibahara, I.; Onose, S. 1992: Microstructural change on electron irradiated oxide dispersion strengthened ferritic steels. Journal of Nuclear Materials 191-194: 874-878
Aihara, J.; Hojou, K.; Furuno, S.; Shimura, K.; Hojo, T.; Sawa, K.; Yamamoto, H.; Motohashi, Y. 2006: Microstructural change with annealing of Si C irradiated with Ne at 573–673K. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms 242(1-2): 441-444
Wang, W.; Ishikawa, K.; Aoki, K. 2010: Microstructural change-induced lowering of hydrogen permeability in eutectic Nb–Ti Ni alloy. Journal of Membrane Science 351(1-2): 65-68
Li, M.; Sun, X.; Hu, W.; Guan, H. 2007: Microstructural changes and elemental diffusion of sputtered Ni Cr Al y coating on a Ni-base SC superalloy subjected to high temperature. Materials Letters 61(29): 5169-5172
Kim, Y.; Rosenberger, A.; Dimiduk, D. 2009: Microstructural changes and estimated strengthening contributions in a gamma alloy Ti–45Al–5Nb pack-rolled sheet. Intermetallics 17(12): 1017-1027
Müller, W.H.; Brandmair, A.; Sheshenin, S.; Savenkova, M. 2009: Microstructural changes and material parameter development. PAMM 9(1): 355-356
Huang, Z.; Lin, J.; Sun, H. 2017: Microstructural changes and mechanical behaviour of a near lamellar γ-Ti Al alloy during long-term exposure at 700 °C. Intermetallics 85: 59-68
Verna, A.; Cesar, P.; Valandro, L.; Fukushima, K.; Monaco, C.; Baldissara, P.; Scotti, R.; Oda, M. 2011: Microstructural changes and roughness of laser treated Y-TZP before sintering. Dental Materials 27: E74-E75
Rojacz, H.; Mozdzen, G.; Weigel, F.; Varga, M. 2016: Microstructural changes and strain hardening effects in abrasive contacts at different relative velocities and temperatures. Materials Characterization 118: 370-381
Bhattacharyya, D.; Yamamoto, T.; Wells, P.; Marquis, E.; Bachhav, M.; Wu, Y.; Davis, J.; Xu, A.; Odette, G.R. 2019: Microstructural changes and their effect on hardening in neutron irradiated Fe-Cr alloys. Journal of Nuclear Materials 519: 274-286
Wang, C.; Guo, Y.; Guo, J.; Zhou, L. 2016: Microstructural changes and their effect on tensile properties of a Ni-Fe based alloy during long-term thermal exposure. Materials Science and Engineering: A670: 178-187
Chen, T.; Aydogan, E.; Gigax, J.G.; Chen, D.; Wang, J.; Wang, X.; Ukai, S.; Garner, F.; Shao, L. 2015: Microstructural changes and void swelling of a 12Cr ODS ferritic-martensitic alloy after high-dpa self-ion irradiation. Journal of Nuclear Materials 467: 42-49
Davies, J.R.; Courtney, T.H.; Przystupa, M.A. 1980: Microstructural changes as a result of temperature gradients in the Al-Al3Ni eutectic. Metallurgical Transactions A 11(2): 323-332
Beck, G.; Bachmann, C. 2014: Microstructural changes due to anodic polarisation of palladium and silver films on YSZ. Solid State Ionics 263: 80-86
Xu, H.; Heinrich, H.; Wiezorek, J.M. 2003: Microstructural changes during annealing of Fe Pd-based thin films. Intermetallics 11(9): 963-969
Abstoss, K.; Schmigalla, S.; Schultze, S.; Mayr, P. 2019: Microstructural changes during creep and aging of a heat resistant MARBN steel and their effect on the electrochemical behaviour. Materials Science and Engineering: A743: 233-242
Romero, J.; Arsenault, R.; Krause Jr, R. 1995: Microstructural changes during creep of an Si C/Al2O3 composite. Materials Science and Engineering: A201(1-2): 13-23
Koul, A.K.; Wallace, W. 1983: Microstructural changes during long time service exposure of udimet 500 and nimonic 115. Metallurgical Transactions A 14(1): 183-189
Han, Y.S.; Hong, S.H. 1999: Microstructural changes during superplastic deformation of Fe–24Cr–7Ni–3Mo–0.14N duplex stainless steel. Materials Science and Engineering: A266(1-2): 276-284
Mironov, S.; Onuma, T.; Sato, Y.; Yoneyama, S.; Kokawa, H. 2017: Microstructural changes during tension of friction-stir welded AZ31 magnesium alloy. Materials Characterization 130: 1-8
Fisher, J.G.; Kang, S.L. 2009: Microstructural changes in (K0.5Na0.5)Nb O3 ceramics sintered in various atmospheres. Journal of the European Ceramic Society 29(12): 2581-2588
Westmacott, K.; Thorel, A.; Broussaud, D.; Laval, J. 1987: Microstructural changes in (Mg) PSZ during aging at 1000°C. Ultramicroscopy 22(1-4): 15-26
Muñoz-Tabares, J.; Jiménez-Piqué, E.; Reyes-Gasga, J.; Anglada, M. 2012: Microstructural changes in 3Y-TZP induced by scratching and indentation. Journal of the European Ceramic Society 32(15): 3919-3927
Nobukuni, N.; Takashima, M.; Ohno, T.; Horie, M. 1995: Microstructural changes in Ge Sb Te film during repetitious overwriting in phase‐change optical recording. Journal of Applied Physics 78(12): 6980-6988
Zinkle, S.; Kojima, S. 1990: Microstructural changes in Mg Al2O4 induced by ion irradiation. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms 46(1-4): 165-170
Newcomer, P.; Siegal, M.; Venturini, E.; Morosin, B.; Overmyer, D. 1997: Microstructural changes in Tl Ba/sub 2/Ca Cu/sub 2/O/sub 7-∂/ thin films after reducing anneals which enhance critical current density. IEEE Transactions on Appiled Superconductivity 7(2): 1887-1890
Šmeļova, V.; Schwedt, A.; Wang, L.; Holweger, W.; Mayer, J. 2017: Microstructural changes in White Etching Cracks (WECs) and their relationship with those in Dark Etching Region (DER) and White Etching Bands (WEBs) due to Rolling Contact Fatigue (RCF). International Journal of Fatigue 100: 148-158
Newstein, M.C.; Wang, H.; Balsara, N.P.; Lefebvre, A.A.; Shnidman, Y.; Watanabe, H.; Osaki, K.; Shikata, T.; Niwa, H.; Morishima, Y. 1999: Microstructural changes in a colloidal liquid in the shear thinning and shear thickening regimes. The Journal of Chemical Physics 111(10): 4827-4838
Liu, F.; Lin, X.; Leng, H.; Cao, J.; Liu, Q.; Huang, C.; Huang, W. 2013: Microstructural changes in a laser solid forming Inconel 718 superalloy thin wall in the deposition direction. Optics-Laser Technology 45: 330-335
Zhang, C.; Chen, K.; Wang, Y.; Sun, J.; Hu, B.; Jin, Y.; Hou, M.; Liu, C.; Sun, Y.; Han, J.; Chen, C. 2000: Microstructural changes in a low-activation Fe–Cr–Mn alloy irradiated with 92 me V Ar ions at 450°C. Journal of Nuclear Materials 283-287: 259-262
Bhaduri, A.; Gopinathan, V.; Ramakrishnan, P.; Miodownik, A.P. 1996: Microstructural changes in a mechanically alloyed Al-6.2Zn-2.5Mg-1.7Cu alloy (7010) with and without particulate Si C reinforcement. Metallurgical and Materials Transactions A 27(11): 3718-3726
Allinson, D.; Barry, T.; Clinton, D.; Hughes, A.; Lettington, A.; Savage, J. 1979: Microstructural changes in a monostable chalcogenide switching glass. Journal of Non-Crystalline Solids 31(3): 307-331
Bachhav, M.; Robert Odette, G.; Marquis, E.A. 2014: Microstructural changes in a neutron-irradiated Fe–15 at.%Cr alloy. Journal of Nuclear Materials 454(1-3): 381-386
Bachhav, M.; Yao, L.; Robert Odette, G.; Marquis, E.A. 2014: Microstructural changes in a neutron-irradiated Fe–6 at.%Cr alloy. Journal of Nuclear Materials 453(1-3): 334-339
Lobb, R.; Scott, V. 1976: Microstructural changes in adjusted uranium during thermal cycling. Journal of Nuclear Materials 60(3): 291-298
Li, N.; Farzadnia, N.; Shi, C. 2017: Microstructural changes in alkali-activated slag mortars induced by accelerated carbonation. Cement and Concrete Research 100: 214-226
Medina, J.; Pérez, P.; Garces, G.; Tolnai, D.; Stark, A.; Schell, N.; Adeva, P. 2016: Microstructural changes in an extruded Mg Zn y alloy reinforced by quasicrystalline I-phase by small additions of calcium, manganese and cerium-rich mischmetal. Materials Characterization 118: 186-198
Popović, N.; Milić, M.; Bogdanov, .; Petrović, R. 1990: Microstructural changes in au films induced by low energy ion bombardment. Vacuum 40(1-2): 149-152
Brown, P.; Hooton, R.; Clark, B. 2004: Microstructural changes in concretes with sulfate exposure. Cement and Concrete Composites 26(8): 993-999
Cho, S.; Lee, G.; Jeong, J.; Kwon, Y.H.; Kim, H.; Seol, H. 2013: Microstructural changes in grain interior and grain boundary by formation of metastable and stable phases related to age-hardening in an Au-Cu-Ag-Pd alloy. Journal of Materials Research 28(9): 1211-1217
Antonini, M.; Manara, A.; Buckley, S. 1982: Microstructural changes in irradiated silica based glasses. Radiation Effects 65(1-4): 55-61
Thrower, P.; Reynolds, W. 1963: Microstructural changes in neutron-irradiated graphite. Journal of Nuclear Materials 8(2): 221-226
Libsch, T.; Rhee, S. 1978: Microstructural changes in semimetallic disc brake pads created by low temperature dynamometer testing. Wear 46(1): 203-212
Amekura, H.; Umeda, N.; Okubo, N.; Lee, C.; Takeda, Y.; Kishimoto, N. 2001: Microstructural changes in silicon thermal oxide induced by high-flux copper negative-ion implantation. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms 175-177: 345-349
Kim, J.E.; Lee, J. 2018: Microstructural changes in the cell wall and enzyme adsorption properties of lignocellulosic biomass subjected to thermochemical pretreatment. Cellulose 26(2): 1111-1124
Baranowska, J. 2007: Microstructural changes in the upper surface of austenitic steel induced by ion sputtering and gas nitriding. Vacuum 81(10): 1216-1219
Saito, K. 1982: Microstructural changes in thin foils of a CuTi alloy. Thin Solid Films 87(3): 233-241
Zhu, Y.H. 1996: Microstructural changes in welded Zn–Al alloy. Journal of Materials Research 11(3): 593-598
Maruyama, I.; Sakamoto, N.; Matsui, K.; Igarashi, G. 2017: Microstructural changes in white Portland cement paste under the first drying process evaluated by WAXS, SAXS, and USAXS. Cement and Concrete Research 91: 24-32
Zelaya, E.; Tolley, A.; Schumacher, G. 2009: Microstructural changes in β–Cu–Zn–Al due to SHi irradiation. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms 267(1): 63-68
Chen, C.; Cheong, S.; Werder, D.; Takagi, H. 1993: Microstructural changes induced by lattice instabilities in La2−x Bax Cu O4(x=0.125) and Nd2Ni O4. Physica C: Superconductivity 206(3-4): 183-194
Nappé, J.; Maurice, C.; Grosseau, P.; Audubert, F.; Thomé, L.; Guilhot, B.; Beauvy, M.; Benabdesselam, M. 2011: Microstructural changes induced by low energy heavy ion irradiation in titanium silicon carbide. Journal of the European Ceramic Society 31(8): 1503-1511
Birtcher, R.; Wang, L. 1991: Microstructural changes induced in Zr3Al and U3Si during irradiation of the crystalline state. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms 59-60: 966-969
Antonini, M.; Manara, A.; Buckley, S.; Manthorpe, S. 1985: Microstructural changes induced in borosilicate glasses by 1 me V electrons. Journal of Physics and Chemistry of Solids 46(3): 287-296
Barros, A.; Tenório, J. 2000: Microstructural changes observed in a rapidly solidified Ni3Al alloy during isothermal treatments. Intermetallics 8(2): 115-120
Chapman, A.; Lane, D.; Rogers, K.; Özsan, M. 2002: Microstructural changes of Cd Te during the annealing process. Thin Solid Films 403-404: 522-525
Ehrlich, A.; Weiß, U.; Hoyer, W.; Geßner, T. 1997: Microstructural changes of Pt/Ti bilayer during annealing in different atmospheres - an XRD study. Thin Solid Films 300(1-2): 122-130
Wang, G.; Geng, L. 2006: Microstructural changes of Si Cw/6061Al composite during compression at temperatures below and above the solidus of the matrix alloy. Materials Chemistry and Physics 96(1): 2-8
Huang, H.; Yan, J. 2016: Microstructural changes of Zr-based metallic glass during micro-electrical discharge machining and grinding by a sintered diamond tool. Journal of Alloys and Compounds 688: 14-21
Chai, L.; Chen, B.; Wang, S.; Guo, N.; Huang, C.; Zhou, Z.; Huang, W. 2016: Microstructural changes of Zr702 induced by pulsed laser surface treatment. Applied Surface Science 364: 61-68
Bai, Y.; Liu, Y.; Geng, G.; Yin, L.; Wang, S. 2003: Microstructural changes of a Cu Zn Al Mn Ni shape memory alloy due to cooling in liquid nitrogen. Materials Science and Engineering: A344(1-2): 31-34
Vlassopoulos, D.; Terakawa, T.; Fuller, G.G. 2003: Microstructural changes of a binary polymer blend in simple shear flow across the phase boundary. Journal of Rheology 47(1): 143-161
Dai, Y.; Krsjak, V.; Kuksenko, V.; Schäublin, R. 2018: Microstructural changes of ferritic/martensitic steels after irradiation in spallation target environments. Journal of Nuclear Materials 511: 508-522
Dargazany, R.; Itskov, M.; Liu, J. 2010: Microstructural changes of filled rubber-like materials under cyclic loading. PAMM 10(1): 289-290
Castro Güiza, G.; Oliveira, C. 2016: Microstructural changes produced by hot forging in a C300 Maraging Steel. Materials Science and Engineering: A655: 142-151
West, A.W.; Larbalestier, D.C. 1984: Microstructural changes produced in a multifilamentary Nb-Ti composite by cold work and heat treatment. Metallurgical Transactions A 15(5): 843-852
Leonard-Bourgaux, C.; Legrand, J.F.; Delzenne, P.; Lajzerowicz, J. 1990: Microstructural changes through the ferroelectric transition of P(VF2– Tr FE) copolymers investigated using synchrotron radiation. Ferroelectrics 109(1): 327-331
Ma, H.; Qin, G.; Geng, P.; Wang, S.; Zhang, D. 2021: Microstructural characterisation and corrosion behaviour of aluminium alloy/steel hybrid structure produced by friction welding. Journal of Manufacturing Processes 61: 349-356
Tewary, N.; Kundu, A.; Nandi, R.; Saha, J.; Ghosh, S. 2016: Microstructural characterisation and corrosion performance of old railway girder bridge steel and modern weathering structural steel. Corrosion Science 113: 57-63
Giovanardi, R.; Montorsi, M.; Ori, G.; Cho, J.; Subhani, T.; Boccaccini, A.R.; Siligardi, C. 2010: Microstructural characterisation and electrical properties of multiwalled carbon nanotubes/glass-ceramic nanocomposites. J. Mater. Chem. 20(2): 308-313
Jung, A.; Diebels, S. 2017: Microstructural characterisation and experimental determination of a multiaxial yield surface for open-cell aluminium foams. Materials-Design 131: 252-264
Kučerová, L.; Zetková, I.; Jandová, A.; Bystrianský, M. 2019: Microstructural characterisation and in-situ straining of additive-manufactured X3Ni Co Mo Ti 18-9-5 maraging steel. Materials Science and Engineering: A750: 70-80
Dutta, A.; Mukherjee, P.; Gayathri, N.; Dey, S.; Neogy, S.; Roy, T.K. 2021: Microstructural characterisation of 160 Me V oxygen irradiated niobium. Philosophical Magazine: 1-22
Elgallad, E.M.; Ibrahim, M.F.; Doty, H.W.; Samuel, F.H. 2018: Microstructural characterisation of Al–Si cast alloys containing rare earth additions. Philosophical Magazine 98(15): 1337-1359
Kok, K.; Hall, M.; Leake, J. 1996: Microstructural characterisation of Co/Cu multilayers using X-ray diffraction. Journal of Magnetism and Magnetic Materials 156(1-3): 51-52
Álvarez-Garcı́a, J.; Pérez-Rodrı́guez, A.; Romano-Rodrı́guez, A.; Calvo-Barrio, L.; Barcones, B.; Morante, J.; Siemer, K.; Luck, I.; Klenk, R. 2001: Microstructural characterisation of Cu in S2 polycrystalline films sulfurised by rapid thermal processing. Thin Solid Films 387(1-2): 219-221
Padmaprabu, C.; Kuppusami, P.; Terrance, A.; Mohandas, E.; Raghunathan, V.; Banerjee, S.; Sanyal, M. K. 2000: Microstructural characterisation of Ti Al thin films grown by DC magnetron co-sputtering technique. Materials Letters 43(3): 106-113
Jones, J.; Whittaker, M.; Buckingham, R.; Johnston, R.; Bache, M.; Clark, D. 2017: Microstructural characterisation of a nickel alloy processed via blown powder direct laser deposition (DLD). Materials-Design 117: 47-57
Daroonparvar, M.; Yajid, M.A.M.; Yusof, N.M.; Bakhsheshi-Rad, H.R.; Hamzah, E. 2016: Microstructural characterisation of air plasma sprayed nanostructure ceramic coatings on Mg–1%Ca alloys (bonded by Ni Co Cr Al YTa alloy). Ceramics International 42(1): 357-371
Fernandez Jiminez, A.M.; Lachowski, E.E.; Palomo, A.; Macphee, D.E. 2004: Microstructural characterisation of alkali-activated PFA matrices for waste immobilisation. Cement and Concrete Composites 26(8): 1001-1006
Murphy, M.; Insley, G.; Laugier, M.; Newcomb, S. 2005: Microstructural characterisation of carbon implanted austenitic stainless steel. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms 234(3): 256-260
Chen, S.; Mukherji, D.; Schumacher, G.; Frohberg, G.; Wahi, R. 2001: Microstructural characterisation of defect structures in a Ti Al-base Ti–47Al–2Nb–2Mn(at.%)+0.8vol.%Ti B2 alloy. Materials Science and Engineering: A300(1-2): 299-308
Abdul Hassan, N.; Airey, G.D.; Md. Yusoff, N.I.; Hainin, M.R.; Putrajaya, R.; Abdullah, M.E.; A. Aziz, M.M. 2015: Microstructural characterisation of dry mixed rubberised asphalt mixtures. Construction and Building Materials 82: 173-183
Yang, J.; Li, H.; Hu, D.; Dixon, M. 2014: Microstructural characterisation of fatigue crack growth fracture surfaces of lamellar Ti45Al2Mn2Nb1B. Intermetallics 45: 89-95
Mwanza, M. 2003: Microstructural characterisation of fatigue crack initiation in Al-based plain bearing alloys. International Journal of Fatigue 25(9-11): 1135-1145
Kunce, I.; Polanski, M.; Karczewski, K.; Plocinski, T.; Kurzydlowski, K. 2015: Microstructural characterisation of high-entropy alloy Al Co Cr Fe Ni fabricated by laser engineered net shaping. Journal of Alloys and Compounds 648: 751-758
Rübner, K.; Prinz, C.; Adolphs, J.; Hempel, S.; Schnell, A. 2015: Microstructural characterisation of lightweight granules made from masonry rubble. Microporous and Mesoporous Materials 209: 113-121
Lainé, S.J.; Knowles, K.M.; Doorbar, P.J.; Cutts, R.D.; Rugg, D. 2017: Microstructural characterisation of metallic shot peened and laser shock peened Ti–6Al–4V. Acta Materialia 123: 350-361
Dutta, A.; Gayathri, N.; Neogy, S.; Mukherjee, P. 2018: Microstructural characterisation of proton irradiated niobium using X-ray diffraction technique. Philosophical Magazine 98(12): 1031-1052
Mutton, P.; Cookson, J.; Qiu, C.; Welsby, D. 2016: Microstructural characterisation of rolling contact fatigue damage in flashbutt welds. Wear 366-367: 368-377
Meisnar, M.; Baker, S.; Bennett, J.; Bernad, A.; Mostafa, A.; Resch, S.; Fernandes, N.; Norman, A. 2017: Microstructural characterisation of rotary friction welded AA6082 and Ti-6Al-4V dissimilar joints. Materials-Design 132: 188-197
Hasell, T.; Yoda, S.; Howdle, S.; Brown, P. 2006: Microstructural characterisation of silver/polymer nanocomposites prepared using supercritical carbon dioxide. Journal of Physics: Conference Series 26: 276-279
Dražič, G.; Beltram, T.; Kosec, M. 1994: Microstructural characterisation of sol-gel derived PLZT(9.5/65/35) thin films. Ferroelectrics 152(1): 49-54
Backhaus-Ricoult, M.; Vignes, J.; Lorang, G.; Knosp, B. 1997: Microstructural characterisation of surface layers of Zr M2 powders (Laves phases) obtained by various corrosion treatments. Journal of Alloys and Compounds 253-254: 492-495
Han, Y.; Fay, M W.; Novikov, S V.; Edmonds, K W.; Gallagher, B L.; Campion, R P.; Staddon, C R.; Foxon, C T.; Brown, P D. 2006: Microstructural characterisation of zinc-blende Ga1-x Mnx N grown by MBE as a function of Mn flux. Journal of Physics: Conference Series 26: 179-182
He, B.; Wu, W.; Zhang, L.; Lu, L.; Yang, Q.; Long, Q.; Chang, K. 2018: Microstructural characteristic and mechanical property of Ti6Al4V alloy fabricated by selective laser melting. Vacuum 150: 79-83
Pingxiao, W.; Caibing, M.; Rong, L. 2005: Microstructural characteristic of montmorillonite and its thermal treatment products. Journal of Wuhan University of Technology-Mater. Sci. Ed. 20(1): 83-88
Wang, J.; Huang, S.; He, M.; Wangyang, P.; Lu, Y.; Huang, H.; Xu, L. 2018: Microstructural characteristic, outward-inward growth behavior and formation mechanism of MAO ceramic coating on the surface of ADC12 Al alloy with micro-groove. Ceramics International 44(7): 7656-7662
Sadeghimeresht, E.; Markocsan, N.; Nylén, P. 2017: Microstructural characteristics and corrosion behavior of HVAF- and HVOF-sprayed Fe-based coatings. Surface and Coatings Technology 318: 365-373
Tjong, S.; Zhu, S.; Ho, N.; Ku, J. 1995: Microstructural characteristics and creep rupture behavior of electron beam and laser welded AISi 316L stainless steel. Journal of Nuclear Materials 227(1-2): 24-31
Nieh, T.; Wadsworth, J. 1997: Microstructural characteristics and deformation properties in superplastic intermetallics. Materials Science and Engineering: A239-240: 88-96
He, W.; Liu, Y.; Tang, H.; Li, Y.; Liu, B.; Liang, X.; Xi, Z. 2017: Microstructural characteristics and densification behavior of high-Nb Ti Al powder produced by plasma rotating electrode process. Materials-Design 132: 275-282
Lee, C.M.; Jeong, H.Y.; Yoon, A.; Mok, Y.; Sohn, D. 2018: Microstructural characteristics and different effects of 800–1200 °C preformed oxides on high-temperature steam oxidation of a zirconium alloy cladding. Journal of Alloys and Compounds 753: 119-129
Rossetti Jr., G.A.; Cao, W.; Randall, C.A. 1994: Microstructural characteristics and diffuse phase transition behavior of lanthanum-modified lead titanate. Ferroelectrics 158(1): 343-350
Xiang, L.; Tang, B.; Xue, X.; Kou, H.; Li, J. 2018: Microstructural characteristics and dynamic recrystallization behavior of β-γ Ti Al based alloy during high temperature deformation. Intermetallics 97: 52-57
Chen, Z.; Wang, X.; Giuliani, F.; Atkinson, A. 2015: Microstructural characteristics and elastic modulus of porous solids. Acta Materialia 89: 268-277
Li, Q.; Yang, Y.; Wan, D.; Cheng, Y.; Zha, M. 2009: Microstructural characteristics and electrical properties of x Pb(Mg1/3Ta2/3)O3–(0.1−x)Pb(Mn1/3Sb2/3)O3–0.9Pb(Zr0.52Ti0.48)O3 high power piezoelectric ceramics. Materials Science and Engineering: B163(3): 145-150
Liu, H.; Hu, Y.; Zhao, Y. 2015: Microstructural characteristics and formation mechanism of friction stir welds of Si C particulates reinforced Al–Si matrix composites. Materials Letters 158: 136-139
Su, X.; Tao, W.; Chen, Y.; Chen, X.; Tian, Z. 2017: Microstructural characteristics and formation mechanism of laser cladding of titanium alloys on carbon fiber reinforced thermoplastics. Materials Letters 195: 228-231
Safaee, I.; Bahrevar, M.A.; Shahraki, M.M.; Baghshahi, S.; Ahmadi, K. 2011: Microstructural characteristics and grain growth kinetics of Pr6O11 Doped Sn O2-based varistors. Solid State Ionics 189(1): 13-18
Sun, A.; Liu, J.; Jiang, C. 2015: Microstructural characteristics and in situ reinforcement in Nb C-doped Fe81Ga19 magnetostrictive alloys. Materials-Design 88: 1342-1346
Alshaaer, M. 2020: Microstructural characteristics and long‐term stability of wollastonite‐based chemically bonded phosphate ceramics. International Journal of Applied Ceramic Technology 18(2): 319-331
Gao, M.; Chen, Z.; Kang, H.; Guo, E.; Li, R.; Fu, Y.; Xie, H.; Wang, T. 2019: Microstructural characteristics and mechanical behavior of B4Cp/6061Al composites synthesized at different hot-pressing temperatures. Journal of Materials Science-Technology 35(8): 1523-1531
Xiong, J.; Yang, X.; Lin, W.; Liu, K. 2017: Microstructural characteristics and mechanical heterogeneity of underwater wet friction taper plug welded joints for low-alloy pipeline steel. Materials Science and Engineering: A695: 279-290
Kim, J.; Seong, K.; Jun, J.; Shin, K.; Kim, K.; Jung, W. 2007: Microstructural characteristics and mechanical properties of Al–2.5wt.% Li–1.2wt.% Cu–x Mg alloys. Journal of Alloys and Compounds 434-435: 324-326
Zhang, L.; Zhou, W.; Hu, P.; Zhou, Q. 2016: Microstructural characteristics and mechanical properties of Mg-Zn-Y alloy containing icosahedral quasicrystals phase treated by pulsed magnetic field. Journal of Alloys and Compounds 688: 868-874
Li, S.; Shi, J.; Xiong, J.; Peng, Y.; Ren, J.; Zhang, F.; Li, J. 2021: Microstructural characteristics and mechanical properties of WC-Co/steel joints diffusion bonded utilizing Ni interlayer. Ceramics International 47(4): 4446-4454
Wang, C.; Guo, Y.; Guo, J.; Zhou, L. 2016: Microstructural characteristics and mechanical properties of a Mo modified Ni–Fe–Cr based alloy. Materials Science and Engineering: A675: 314-322
Wang, P.; Zhang, B.; Tan, C.C.; Raghavan, S.; Lim, Y.; Sun, C.; Wei, J.; Chi, D. 2016: Microstructural characteristics and mechanical properties of carbon nanotube reinforced Inconel 625 parts fabricated by selective laser melting. Materials-Design 112: 290-299
Chen, A.; Wu, G.; Zhang, L.; Zhang, X.; Shi, C.; Li, Y. 2016: Microstructural characteristics and mechanical properties of cast Al-3Li-x Cu-0.2Zr alloy. Materials Science and Engineering: A677: 29-40
Sun, J.; Zhang, L.; Wu, G.; Zhang, X.; Rong, M.; Wang, C. 2019: Microstructural characteristics and mechanical properties of extruded Al-4Cu-1Li-0.4Mg-0.1Zr-x Zn alloy. Materials Science and Engineering: A743: 223-232
Liu, H.; Zhao, Y.; Hu, Y.; Chen, S.; Lin, Z. 2015: Microstructural characteristics and mechanical properties of friction stir lap welding joint of Alclad 7B04-T74 aluminum alloy. International Journal of Advanced Manufacturing Technology 78(9-12): 1415-1425
Li, S.; Yang, X.; Wang, F.; Tang, W.; Li, H. 2019: Microstructural characteristics and mechanical properties of friction-stir-welded modified 9Cr–1Mo steel. Journal of Materials Science 54(8): 6632-6650
Sun, S.; Wang, L.; Qin, J.; Chen, Y.; Lu, W.; Zhang, D. 2011: Microstructural characteristics and mechanical properties of in situ synthesized (Ti B+Ti C)/TC18 composites. Materials Science and Engineering: A530: 602-606
Li, Q.; Lin, X.; Liu, F.; Liu, F.; Huang, W. 2017: Microstructural characteristics and mechanical properties of laser solid formed K465 superalloy. Materials Science and Engineering: A700: 649-655
Rafiei, R .; Ostovari Moghaddam, A.; Hatami, M.R.; Khodabakhshi, F.; Abdolahzadeh, A.; Shokuhfar, A. 2016: Microstructural characteristics and mechanical properties of the dissimilar friction-stir butt welds between an Al–Mg alloy and A316L stainless steel. International Journal of Advanced Manufacturing Technology 90(9-12): 2785-2801
Du, B.; Hu, Z.; Sheng, L.; Xu, D.; Qiao, Y.; Wang, B.; Wang, J.; Zheng, Y.; Xi, T. 2021: Microstructural characteristics and mechanical properties of the hot extruded Mg-Zn-Y-Nd alloys. Journal of Materials Science-Technology 60: 44-55
Ge, J.; Wang, X.; Cui, F. 2006: Microstructural characteristics and nanomechanical properties across the thickness of the wild-type zebrafish skeletal bone. Materials Science and Engineering: C26(4): 710-715
Chen, P.; Chou, C.; Cheng, H.; Hu, C.; Lin, I. 2000: Microstructural characteristics and nonequilibrium core-shell phase in (Pbx Sr1−x)Ti O3materials and their electrical properties. Ferroelectrics 241(1): 25-34
Verma, A.; Srivastava, A.; Karar, N.; Chander, H.; Agnihotry, S. 2007: Microstructural characteristics and photoluminescence performance of nanograined thermally treated Ce O2-Ti O2 xerogels. Journal of Materials Research 22(5): 1182-1187
Kumar, D.; Idapalapati, S.; Wang, W.; Bhowmik, A. 2019: Microstructural characteristics and strengthening mechanisms in a polycrystalline Ni-based superalloy under deep cold rolling. Materials Science and Engineering: A753: 285-299
Sun, B.; Fazeli, F.; Scott, C.; Guo, B.; Aranas Jr., C.; Chu, X.; Jahazi, M.; Yue, S. 2018: Microstructural characteristics and tensile behavior of medium manganese steels with different manganese additions. Materials Science and Engineering: A729: 496-507
Sacchi, M.C.; Fortini, F.; Losio, S.; Tritto, I.; Costa, G.; Stagnaro, P.; Tincul, I.; Wahner, U.M. 2004: Microstructural characteristics and thermal properties ofansa-zirconocene catalyzed copolymers of propene with higherα-olefins. Macromolecular Symposia 213(1): 57-68
Ogunbiyi, O.F.; Jamiru, T.; Sadiku, E.R.; Beneke, L.W.; Adesina, O.T.; Adegbola, T.A. 2019: Microstructural characteristics and thermophysical properties of spark plasma sintered Inconel 738LC. International Journal of Advanced Manufacturing Technology 104(1-4): 1425-1436
Lan, L.; Qiu, C.; Zhao, D.; Gao, X.; Du, L. 2011: Microstructural characteristics and toughness of the simulated coarse grained heat affected zone of high strength low carbon bainitic steel. Materials Science and Engineering: A529: 192-200
Hyuga, H.; Jones, M. I.; Hirao, K.; Yamauchi, Y. 2004: Microstructural characteristics in silicon nitride/tungsten composites by different in-situ processing. Materials Letters 58(1-2): 21-24
Zhu, Y.; Zhuo, M.; Ma, X.; Lu, H. 2007: Microstructural characteristics in the Ba Ti O2.52 thin films showing metallic behavior. Materials Letters 61(10): 1971-1973
Yuan, X.; Kang, C.Y. 2014: Microstructural characteristics in vacuum TLP (Transient Liquid Phase) bonds using a novel iron-based interlayer based on duplex stainless steel base metal alloyed with a melting-point depressant. Vacuum 99: 12-16
Vardya, R.; Mahajan, S.; Bhat, R. 1995: Microstructural characteristics of (110) in Ga as layers grown by OMVPE. Materials Science and Engineering: B33(2-3): 148-155
Chou, C.; Su, I.; Tsai, D.; Lin, I. 2003: Microstructural characteristics of (Pb1−x Cax)Ti O3 materials. Materials Chemistry and Physics 79(2-3): 191-194
Kim, Y.; Lee, J.; Noh, Y.; Oh, J.; Ahn, S. 2015: Microstructural characteristics of Al N thin layers grown on Si(110) substrates by molecular beam epitaxy: Transmission electron microscopy study. Thin Solid Films 576: 61-67
Xin, L.; Yang, B.; Li, J.; Lu, Y.; Shoji, T. 2017: Microstructural characteristics of Alloy 690TT subjected to fretting corrosion in high temperature water. Corrosion Science 123: 116-128
Hoier, P.; Malakizadi, A.; Stuppa, P.; Cedergren, S.; Klement, U. 2018: Microstructural characteristics of Alloy 718 and Waspaloy and their influence on flank wear during turning. Wear 400-401: 184-193
Li, X.J.; Li, Z.J.; Onofrei, M.; Ballivy, G.; Khayat, K.H. 1999: Microstructural characteristics of HPC under different thermo-mechanical and thermo-hydraulic conditions. Materials and Structures 32(10): 727-733
Zhang, S.; Guo, X. 2015: Microstructural characteristics of Nb–Si based ultrahigh temperature alloys with B and Hf additions. Intermetallics 64: 51-58
Wang, Z.; Liu, W.; Zhou, B.; Ni, J.; Xu, H.; Li, Q. 2008: Microstructural characteristics of Nd2Fe14B/α-Fe nanocomposite ribbons bearing Nb element. Rare Metals 27(3): 299-302
Wu, X. 1999: Microstructural characteristics of Ti C-reinforced composite coating produced by laser syntheses. Journal of Materials Research 14(7): 2704-2707
Song, G.; Sun, Z.; Clausen, B.; Liaw, P.K. 2017: Microstructural characteristics of a Ni2Ti Al-precipitate-strengthened ferritic alloy. Journal of Alloys and Compounds 693: 921-928
Pouranvari, M.; Ekrami, A.; Kokabi, A.H.; Han, H.N. 2013: Microstructural characteristics of a cast IN718 superalloy bonded by isothermal solidification. Metals and Materials International 19(5): 1091-1099
Wen, M.; Cizek, P.; Wen, C.; Hodgson, P.; Li, Y. 2013: Microstructural characteristics of a nanoeutectic Ag–Cu alloy processed by surface mechanical attrition treatment. Scripta Materialia 68(7): 499-502
Hu, J.; Qian, Z.; Liu, Y.; Xue, Y. 2017: Microstructural characteristics of asphalt concrete with different gradations by X-ray CT. Journal of Wuhan University of Technology-Mater. Sci. Ed. 32(3): 625-632
Barani, B.; Lakshminarayanan, A.; Subashini, R. 2019: Microstructural characteristics of chitosan deposited az91 magnesium alloy. Materials Today: Proceedings 16: 456-462
Lu, P.; Chu, F.; Jia, Q.X.; Mitchell, T.E. 1998: Microstructural characteristics of conductive Sr Ru O3 thin films formed by pulsed-laser deposition. Journal of Materials Research 13(8): 2302-2307
Sang, Y.; Zheng, L.; Pan, Q.; Zhou, L.; Li, Y.; Zhang, H. 2011: Microstructural characteristics of directionally solidified Ni-43Ti-4Al-2Nb-2Hf alloy. Rare Metals 30(S 1): 340-344
Tillmann, W.; Hagen, L.; Stangier, D.; Paulus, M.; Tolan, M.; Sakrowski, R.; Biermann, D.; Freiburg, D. 2019: Microstructural characteristics of high-feed milled HVOF sprayed WC-Co coatings. Surface and Coatings Technology 374: 448-459
Liu, L.; Qi, X.; Wu, Z. 2010: Microstructural characteristics of lap joint between magnesium alloy and mild steel with and without the addition of Sn element. Materials Letters 64(1): 89-92
de Azeredo, A.F.N.; Struble, L.J.; Carneiro, A.M.P. 2014: Microstructural characteristics of lime-pozzolan pastes made from kaolin production wastes. Materials and Structures 48(7): 2123-2132
Chou, C.; Chen, P.; Lin, I. 1999: Microstructural characteristics of microwave-sintered semi-conductive Pb0.6Sr0.4Tio3ceramics. Ferroelectrics 231(1): 37-42
Kamil, M.; Kaseem, M.; Lee, Y.; Ko, Y. 2017: Microstructural characteristics of oxide layer formed by plasma electrolytic oxidation: Nanocrystalline and amorphous structures. Journal of Alloys and Compounds 707: 167-171
Lee, K.M.; Ko, Y.G.; Shin, D.H. 2014: Microstructural characteristics of oxide layers formed on Mg–9wt%Al–1wt%Zn alloy via two-step plasma electrolytic oxidation. Journal of Alloys and Compounds 615: S418-S422
Sun, M.; Wu, X.; Han, E.; Rao, J. 2009: Microstructural characteristics of oxide scales grown on stainless steel exposed to supercritical water. Scripta Materialia 61(10): 996-999
Lin, Y.; Zhou, Y.; Lavernia, E.J. 2004: Microstructural characteristics of oxides in 5083 Al synthesized by reactive atomization and deposition. Journal of Materials Research 19(10): 3090-3098
Sampath, S. 1993: Microstructural characteristics of plasma spray consolidated amorphous powders. Materials Science and Engineering: A167(1-2): 1-10
Guo, Z.; Ding, Q.; Liu, L.; Zhang, X.; Luo, X.; Duan, F. 2021: Microstructural characteristics of refractory magnesia produced from macrocrystalline magnesite in China. Ceramics International 47(16): 22701-22708
Kaur, K.; Pandey, O. 2010: Microstructural characteristics of spray formed zircon sand reinforced LM13 composite. Journal of Alloys and Compounds 503(2): 410-415
Westood, P.; Abell, J.; Pitman, K. 1988: Microstructural characteristics of ternary rare earth-iron alloys. IEEE Transactions on Magnetics 24(2): 1873-1875
Cloots, M.; Kunze, K.; Uggowitzer, P.J.; Wegener, K. 2016: Microstructural characteristics of the nickel-based alloy IN738LC and the cobalt-based alloy Mar-M509 produced by selective laser melting. Materials Science and Engineering: A658: 68-76
Yuan, G.; Zhang, L.; Yue, Q.; Gu, H.; Li, G.; Shen, J. 2015: Microstructural characteristics of β precipitates in Zr–1Nb alloy. Materials Chemistry and Physics 165: 87-90
Awoyera, P.; Akinmusuru, J.; Dawson, A.; Ndambuki, J.; Thom, N. 2018: Microstructural characteristics, porosity and strength development in ceramic-laterized concrete. Cement and Concrete Composites 86: 224-237
Wan, Z.; He, Y.; Shin, K.; Choi, C.; Suh, E. 2012: Microstructural characteristization of in Ga N/Ga N epitaxial Layers with Pt nanoclusters grown by using MOCVD on c-plane sapphire substrates. Journal of the Korean Physical Society 61(8): 1283-1286
Jiang, J.; Li, S.; Yu, W.; Zhou, Y. 2019: Microstructural characterization and abrasive wear resistance of a high chromium white iron composite reinforced with in situ formed Ti Cx. Materials Chemistry and Physics 224: 169-174
Younes, C.; Heard, P.J.; Wild, R.K.; Flewitt, P.E.J. 2000: Microstructural characterization and analysis of inclusions in C-Mn steel and weld metals. Metallurgical and Materials Transactions A 31(3): 615-628
Renaud, L.; Fouquet, F.; Millet, J.; Mazille, H.; Crolet, J. 1991: Microstructural characterization and comparative electrochemical behaviour of FeNiCr amd FeNiCrP laser surface alloys. Materials Science and Engineering: A134: 1049-1053
Neikter, M.; Åkerfeldt, P.; Pederson, R.; Antti, M.; Sandell, V. 2018: Microstructural characterization and comparison of Ti-6Al-4V manufactured with different additive manufacturing processes. Materials Characterization 143: 68-75
Zivkovic, L.; Nikolic, Z.; Boskovic, S.; Miljkovic, M. 2004: Microstructural characterization and computer simulation of conductivity in Si3N4–Ti N composites. Journal of Alloys and Compounds 373(1-2): 231-236
Chai, Z.; Jiang, C.; Zhao, Y.; Wang, C.; Zhu, K.; Cai, F. 2016: Microstructural characterization and corrosion behaviors of Ni-Cu-Co coatings electrodeposited in sulphate-citrate bath with additives. Surface and Coatings Technology 307: 817-824
Sujata, M.; Sastry, D.; Ramachandra, C. 2004: Microstructural characterization and creep behaviour of as-cast titanium aluminide Ti–48Al–2V. Intermetallics 12(7-9): 691-697
Tatar, D.; Lutfi Öveçoğlu, M.; Özen, G.; Speakman, S.A. 2009: Microstructural characterization and crystallization kinetics of (1-x)Te O2-0.10Cd F2-x Pb F2 (x = 0.05, 0.10, and 0.15 mol) glasses. Journal of Materials Research 24(10): 3087-3094
Huang, Y.; Wiezorek, J.; Garner, F.; Freyer, P.; Okita, T.; Sagisaka, M.; Isobe, Y.; Allen, T. 2015: Microstructural characterization and density change of 304 stainless steel reflector blocks after long-term irradiation in EBR-Ii. Journal of Nuclear Materials 465: 516-530
Hosseini, N.; Karimzadeh, F.; Abbasi, M.; Choi, G. 2014: Microstructural characterization and electrical conductivity of Cux Mn3−x O4 (0.9≤x≤1.3) spinels produced by optimized glycine–nitrate combustion and mechanical milling processes. Ceramics International 40(8): 12219-12226
Zhang, Z.; Jing, H.; Xu, L.; Han, Y.; Gao, Z.; Zhao, L.; Zhang, J. 2017: Microstructural characterization and electron backscatter diffraction analysis across the welded interface of duplex stainless steel. Applied Surface Science 413: 327-343
Moniri Javadhesari, S.; Alipour, S.; Akbarpour, M. 2019: Microstructural characterization and enhanced hardness, wear and antibacterial properties of a powder metallurgy Si C/Ti-Cu nanocomposite as a potential material for biomedical applications. Ceramics International 45(8): 10603-10611
An, Q.; Ang, M.B.M.Y.; Huang, Y.; Huang, S.; Chiao, Y.; Lai, C.; Tsai, H.; Hung, W.; Hu, C.; Wu, Y.; Lee, K. 2019: Microstructural characterization and evaluation of pervaporation performance of thin-film composite membranes fabricated through interfacial polymerization on hydrolyzed polyacrylonitrile substrate. Journal of Membrane Science 583: 31-39
He, Z.; Zhang, L.; Zhang, Y.; Liu, Y.; Liu, X.; Chen, B. 2015: Microstructural characterization and failure analysis of 2D C/Si C two-layer beam with pin-bonded hybrid joints. International Journal of Adhesion and Adhesives 57: 70-78
Moradi, M.; Moazeni, M.; Salimijazi, H.R. 2014: Microstructural characterization and failure mechanism of vacuum plasma sprayed Ti-6Al-4V/B4C composite. Vacuum 107: 34-40
Huang, Z.; Lin, J.; Feng, B. 2017: Microstructural characterization and fatigue response of alloy Ti-46Al-5Nb-1W with varied surface quality and thermal exposure history. Materials Characterization 130: 285-297
Su, C.; Su, C.; Lin, Y. 2015: Microstructural characterization and field emission properties of tungsten oxide and titanium-oxide-doped tungsten oxide nanowires. Materials Chemistry and Physics 153: 353-358
Lee, J.H.; Kim, D.C.; Kim, S.Y.; Choi, S.; Lee, K.; Lee, J.Y.; Koun Cho, H. 2013: Microstructural characterization and formation mechanism of 21° top facets of Zn O-based nanowall structures. Physica B: Condensed Matter 412: 12-16
Feng, R.; Li, S.; Zhu, X.; Ao, Q. 2015: Microstructural characterization and formation mechanism of abnormal segregation band of hot rolled ferrite/pearlite steel. Journal of Alloys and Compounds 646: 787-793
Souza, D.F.; Nunes, E.H.; Queiroga, J.A.; Vasconcelos, W.L. 2018: Microstructural characterization and gas permeation performance of freeze-cast alumina supports. Journal of the European Ceramic Society 38(11): 4020-4025
Babu, N.K.; Talari, M.K.; Pan, D.; Sun, Z.; Wei, J.; Sivaprasad, K. 2012: Microstructural characterization and grain refinement of AA6082 gas tungsten arc welds by scandium modified fillers. Materials Chemistry and Physics 137(2): 543-551
Chai, L.; Wu, H.; Zheng, Z.; Guan, H.; Pan, H.; Guo, N.; Song, B. 2018: Microstructural characterization and hardness variation of pure Ti surface-treated by pulsed laser. Journal of Alloys and Compounds 741: 116-122
Dezecot, S.; Brochu, M. 2015: Microstructural characterization and high cycle fatigue behavior of investment cast A357 aluminum alloy. International Journal of Fatigue 77: 154-159
Leng, H.; Yan, P.; Han, X.; Liu, W.; Liu, Q.; Li, Q. 2020: Microstructural characterization and hydrogenation performance of Zrx V5Fe(x=3-9) alloys. Progress in Natural Science: Materials International 30(2): 229-238
Lima, G.; Peres, M.; Garroni, S.; Baró, M.; Surinyach, S.; Kiminami, C.; Ishikawa, T.; Botta, W.; Jorge Jr., A. 2010: Microstructural characterization and hydrogenation study of extruded Mg Fe alloy. Journal of Alloys and Compounds 504: S299-S301
Renghini, C.; Giuliani, A.; Mazzoni, S.; Brun, F.; Larsson, E.; Baino, F.; Vitale-Brovarone, C. 2013: Microstructural characterization and in vitro bioactivity of porous glass-ceramic scaffolds for bone regeneration by synchrotron radiation X-ray microtomography. Journal of the European Ceramic Society 33(9): 1553-1565
Siddiquee, A.N.; Pandey, S.; Abidi, M.H.; Al-Ahmari, A.; Khan, N.Z.; Gangil, N. 2019: Microstructural characterization and in-process traverse force during friction stir welding of austenitic stainless steel. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 234(5): 1031-1043
Raju, G.; Biswas, K.; Basu, B. 2009: Microstructural characterization and isothermal oxidation behavior of hot-pressed Ti B2–10wt.% Ti Si2 composite. Scripta Materialia 61(1): 104-107
Rodrigues, J.F.Q.; Costa, D.; Contieri, R.J.; Osório, W.R.; Bortolozo, A.D. 2019: Microstructural characterization and mechanical behavior of an Ag Al Nb Ti Zn complex composition alloy produced using powder metallurgy (P/M). Materials Science and Engineering: A744: 305-315
Kannan, A.R.; Kumar, S.M.; Pramod, R.; Shanmugam, N.S.; Vishnukumar, M.; Naveenkumar, S. 2021: Microstructural characterization and mechanical integrity of stainless steel 316L clad layers deposited via wire arc additive manufacturing for nuclear applications. Materialwissenschaft und Werkstofftechnik 52(6): 617-623
Zhao, L.; Wang, S.; Jin, Y.; Chen, Y. 2018: Microstructural characterization and mechanical performance of Al–Cu–Li alloy electron beam welded joint. Aerospace Science and Technology 82-83: 61-69
Avettand-Fènoël, M.; Racineux, G.; Debeugny, L.; Taillard, R. 2016: Microstructural characterization and mechanical performance of an AA2024 aluminium alloy - Pure copper joint obtained by linear friction welding. Materials-Design 98: 305-318
Sun, Q.; Li, J.; Liu, Y.; Li, B.; Xu, P.; Feng, J. 2017: Microstructural characterization and mechanical properties of Al/Ti joint welded by CMT method- Assisted hybrid magnetic field. Materials-Design 116: 316-324
Fei, Z.; Pan, Z.; Cuiuri, D.; Li, H.; Van Duin, S.; Yu, Z. 2019: Microstructural characterization and mechanical properties of K-TIG welded SAF2205/AISI316L dissimilar joint. Journal of Manufacturing Processes 45: 340-355
Zhang, X.; Li, Y.; He, X.; Liu, X.; Jiang, Q.; Sun, Y. 2015: Microstructural characterization and mechanical properties of Nb–Ti–C–B in-situ composites with W addition. Materials Science and Engineering: A646: 332-340
Pazhouhanfar, Y.; Eghbali, B. 2018: Microstructural characterization and mechanical properties of Ti B2 reinforced Al6061 matrix composites produced using stir casting process. Materials Science and Engineering: A710: 172-180
Zheng, K.; Zhang, Q.; Wang, J.; Lu, Y. 2021: Microstructural characterization and mechanical properties of ZTA/ZTA joint brazed by Ni50Ti50 filler metal. Ceramics International 47(2): 2758-2765
Jihua, C.; Zhenhua, C.; Hongge, Y.; Fuquan, Z. 2009: Microstructural characterization and mechanical properties of a Mg–6Zn–3Sn–2Al alloy. Journal of Alloys and Compounds 467(1-2): L1-L7
Sheng, H.; Gong, M.; Peng, L. 2013: Microstructural characterization and mechanical properties of an Al0.5Co Cr Fe Cu Ni high-entropy alloy in as-cast and heat-treated/quenched conditions. Materials Science and Engineering: A567: 14-20
Hashemi, S.S.G.; Mahmud, H.B.; Djobo, J.N.Y.; Tan, C.G.; Ang, B.C.; Ranjbar, N. 2018: Microstructural characterization and mechanical properties of bottom ash mortar. Journal of Cleaner Production 170: 797-804
Liang, Z.; Qin, G.; Wang, L.; Meng, X.; Li, F. 2015: Microstructural characterization and mechanical properties of dissimilar friction welding of 1060 aluminum to AZ31B magnesium alloy. Materials Science and Engineering: A645: 170-180
Mao, Y.; Ni, Y.; Xiao, X.; Qin, D.; Fu, L. 2020: Microstructural characterization and mechanical properties of micro friction stir welded dissimilar Al/Cu ultra-thin sheets. Journal of Manufacturing Processes 60: 356-365
Erden, M.A.; Gündüz, S.; Türkmen, M.; Karabulut, H. 2014: Microstructural characterization and mechanical properties of microalloyed powder metallurgy steels. Materials Science and Engineering: A616: 201-206
Swamy, M.; Laxminarayana, P.; Pavan, A.; Antony Harison, M.; Jayaraman, G.; Singh, K. 2018: Microstructural characterization and mechanical properties of sand cast and investment cast alloy 625 for HP/IP casing applications for advanced fossil fired power plants. Materials Today: Proceedings 5(13): 27118-27122
Wang, Q.; Min, F.; Zhu, J. 2014: Microstructural characterization and mechanical property of Fly Ash/Al-25Mg composites. Journal of Wuhan University of Technology-Mater. Sci. Ed. 29(5): 1019-1022
Geng, P.; Qin, G.; Li, T.; Zhou, J.; Zou, Z.; Yang, F. 2019: Microstructural characterization and mechanical property of GH4169 superalloy joints obtained by linear friction welding. Journal of Manufacturing Processes 45: 100-114
Cao, L.; Wang, H.; Zou, C.; Wei, Z. 2009: Microstructural characterization and micromechanical properties of dual-phase carbide in arc-melted titanium aluminide base alloy with carbon addition. Journal of Alloys and Compounds 484(1-2): 816-821
Rusu, G.; Ciupina, V.; Popa, M.; Prodan, G.; Rusu, G.; Baban, C. 2006: Microstructural characterization and optical properties of Zn Se thin films. Journal of Non-Crystalline Solids 352(9-20): 1525-1528
Cheng, X.; Gao, Y.; Fu, H.; Xing, J.; Bai, B. 2010: Microstructural characterization and properties of Al/Cu/steel diffusion bonded joints. Metals and Materials International 16(4): 649-655
Yin, J.; Chen, G.; Zhao, S.; Ge, Y.; Li, Z.; Yang, P.; Han, W.; Wang, J.; Tang, H.; Cao, P. 2017: Microstructural characterization and properties of Ti-28Ta at.% powders produced by plasma rotating electrode process. Journal of Alloys and Compounds 713: 222-228
Shanmugavelayutham, G.; Yano, S.; Kobayashi, A. 2006: Microstructural characterization and properties of Zr O2/Al2O3 thermal barrier coatings by gas tunnel-type plasma spraying. Vacuum 80(11-12): 1336-1340
Tan, C.; Zhou, K.; Kuang, M.; Ma, W.; Kuang, T. 2018: Microstructural characterization and properties of selective laser melted maraging steel with different build directions. Science and Technology of Advanced Materials 19(1): 746-758
Edtmaier, C.; Segl, J.; Rosenberg, E.; Liedl, G.; Pospichal, R.; Steiger-Thirsfeld, A. 2018: Microstructural characterization and quantitative analysis of the interfacial carbides in Al(Si)/diamond composites. Journal of Materials Science 53(22): 15514-15529
Liu, Z.; Olivares, R.O.; Lei, Y.; Garcia, C.I.; Wang, G. 2016: Microstructural characterization and recrystallization kinetics modeling of annealing cold-rolled vanadium microalloyed HSLA steels. Journal of Alloys and Compounds 679: 293-301
Baino, F.; Falvo D'Urso Labate, G.; di Confiengo, G.G.; Faga, M.G.; Vitale-Brovarone, C.; Catapano, G. 2018: Microstructural characterization and robust comparison of ceramic porous orbital implants. Journal of the European Ceramic Society 38(8): 2988-2993
Evirgen, A.; Karaman, I.; Santamarta, R.; Pons, J.; Noebe, R. 2015: Microstructural characterization and shape memory characteristics of the Ni50.3Ti34.7Hf15 shape memory alloy. Acta Materialia 83: 48-60
Zhou, Y.; Juarez-Islas, J.A.; Alvarez-Fregoso, O.; Yoon, W.Y.; Lavernia, E.J. 1999: Microstructural characterization and solidification behavior of atomized Al–Fe powders. Journal of Materials Research 14(3): 729-736
Li, W.; Zhang, K.; Liu, P.; Zheng, W.; Ma, F.; Chen, X.; Feng, R.; Liaw, P.K. 2018: Microstructural characterization and strengthening mechanism of Al N/Y nanocomposite and nanomultilayered films. Journal of Alloys and Compounds 732: 414-421
Shen, J.; Li, Y.; Li, F.; Yang, H.; Zhao, Z.; Kano, S.; Matsukawa, Y.; Satoh, Y.; Abe, H. 2016: Microstructural characterization and strengthening mechanisms of a 12Cr-ODS steel. Materials Science and Engineering: A673: 624-632
Evirgen, A.; Karaman, I.; Santamarta, R.; Pons, J.; Noebe, R. 2014: Microstructural characterization and superelastic response of a Ni50.3Ti29.7Zr20 high-temperature shape memory alloy. Scripta Materialia 81: 12-15
Farotade, G.A.; Adesina, O.S.; Ogunbiyi, O.f.; Adesina, O.t.; Kazeem, R.A.; Adeniran, A.A. 2021: Microstructural characterization and surface properties of laser clad Ni-Zr B2 coatings on Ti-6Al-4V alloy. Materials Today: Proceedings 38: 1035-1039
Dinaharan, I.; Balakrishnan, M.; David Raja Selvam, J.; Akinlabi, E. 2019: Microstructural characterization and tensile behavior of friction stir processed AA6061/Al2Cu cast aluminum matrix composites. Journal of Alloys and Compounds 781: 270-279
Rivera Olvera, J.N.; Acevedo Martínez, J.; Herrera Hernández, H.; García Orozco, I.; Díaz Barriga Arceo, L. 2017: Microstructural characterization and thermodynamic analysis of Mo Zn produced by mechanical alloying. Journal of Alloys and Compounds 696: 329-337
Rey-García, F.; Gutiérrez-Mora, F.; Borrel, C.; Estepa, L.; Angurel, L.; De La Fuente, G. 2018: Microstructural characterization and tribological behavior of Laser Furnace processed ceramic tiles. Ceramics International 44(6): 6997-7005
Yang, B.; Gan, G.; Yang, L.; Sun, M.; Zhang, H.; Fang, Z.Z. 2011: Microstructural characterization and wear behavior of in situ Ti C/7075 composites synthesized by displacement reactions and spray forming. Materials Science and Engineering: A528(18): 5649-5655
Vashishtha, N.; Sapate, S.; Jyoti Sahariah, B.; Bagde, P. 2018: Microstructural characterization and wear behaviour of High Velocity Oxy-Fuel sprayed Cr3C2-25Ni Cr coating. Materials Today: Proceedings 5(9): 17686-17693
Ficici, F.; Koksal, S. 2015: Microstructural characterization and wear properties of in situ Al B2–reinforced Al–4Cu metal matrix composite. Journal of Composite Materials 50(12): 1685-1696
Zheng, L.; Guo, Y.; Zhou, L.; Zhang, X.; Zhang, H. 2013: Microstructural characterization in 7 at% Al-containing Ni Ti-based alloys. Rare Metals 33(5): 534-540
Öveçoğlu, M.; Kabalcı, .; G., .; B., . 2007: Microstructural characterization of (1−x)Te O2–x Pb F2 (x=0.10, and 0.25mol) glasses. Journal of the European Ceramic Society 27(2-3): 1801-1804
Mikmekova, S.; Man, J.; Konvalina, I. 2021: Microstructural characterization of 316L stainless steel fabricated by selective laser melting by advanced electron microscopy techniques. Microscopy and Microanalysis 27(S 1): 2666-2668
Huang, L.; Hua, X.; Wu, D.; Jiang, Z.; Li, F.; Wang, H.; Shi, S. 2017: Microstructural characterization of 5083 aluminum alloy thick plates welded with GMAW and twin wire GMAW processes. International Journal of Advanced Manufacturing Technology 93(5-8): 1809-1817
Ma, B.; Wang, J.; Lee, T.H.; Dorris, S.E.; Wen, J.; Balachandran, U. 2018: Microstructural characterization of Al4C3 in aluminum–graphite composite prepared by electron-beam melting. Journal of Materials Science 53(14): 10173-10180
Yoon, S.; Bang, J.; Song, Y.; Oh, J. 2015: Microstructural characterization of Au-free Si/Ti/Al/Cu ohmic contacts in an Al Ga N/Ga N heterostructure. Thin Solid Films 590: 335-339
Singh, M.; Vasudev, H.; Kumar, R. 2020: Microstructural characterization of BN thin films using RF magnetron sputtering method. Materials Today: Proceedings 26: 2277-2282
Ye, F.; Mori, T.; Ou, D.R.; Zou, J.; Drennan, J. 2008: Microstructural characterization of Ce1−x Tbx O2−δ (0.60≤x≤0.90) sintered samples. Materials Research Bulletin 43(3): 759-764
Tarakina, N.V.; Schreyeck, S.; Duchamp, M.; Karczewski, G.; Gould, C.; Brunner, K.; Dunin-Borkowski, R.E.; Molenkamp, L.W. 2017: Microstructural characterization of Cr-doped (Bi,Sb)2Te3thin films. CrystEngComm 19(26): 3633-3639
de Carvalho, M.F.; Carlos, I.A. 2018: Microstructural characterization of Cu-Sn-Zn electrodeposits produced potentiostatically from acid baths based on trisodium nitrilotriacetic. Journal of Electroanalytical Chemistry 823: 737-746
Kurr, P.; Kasatkin, I.; Girgsdies, F.; Trunschke, A.; Schlögl, R.; Ressler, T. 2008: Microstructural characterization of Cu/Zn O/Al2O3 catalysts for methanol steam reforming- A comparative study. Applied Catalysis A: General 348(2): 153-164
Kamalakaran, R.; Lupo, F.; Grobert, N.; Scheu, T.; Jin-Phillipp, N.; Rühle, M. 2004: Microstructural characterization of C–Si C–carbon nanotube composite flakes. Carbon 42(1): 1-4
Brimbal, D.; Beck, L.; Troeber, O.; Gaganidze, E.; Trocellier, P.; Aktaa, J.; Lindau, R. 2015: Microstructural characterization of Eurofer-97 and Eurofer-ODS steels before and after multi-beam ion irradiations at JANNUS Saclay facility. Journal of Nuclear Materials 465: 236-244
Deriu, A.; Malizia, F.; Ronconi, F.; Vittori‐Antisari, M.; King, S.M. 1996: Microstructural characterization of Fe80B20eutectic spherulites by small‐angle neutron scattering and transmission electron microscopy. Journal of Applied Physics 79(5): 2296-2301
Gok, M.G.; Goller, G. 2017: Microstructural characterization of GZ/CYSZ thermal barrier coatings after thermal shock and CMAS+hot corrosion test. Journal of the European Ceramic Society 37(6): 2501-2508
Kato, T.; Yoshida, R.; Chikumoto, N.; Lee, S.; Tanabe, K.; Izumi, T.; Hirayama, T.; Shiohara, Y. 2011: Microstructural characterization of Gd Ba2Cu3Oy superconductive layer fabricated by in-plume pulsed laser deposition. Physica C: Superconductivity and its Applications 471(21-22): 1012-1016
Wu, K.; Shi, H.; Xu, L.; Ye, G.; De Schutter, G. 2016: Microstructural characterization of ITZ in blended cement concretes and its relation to transport properties. Cement and Concrete Research 79: 243-256
Marzocca, A.L.; Bozzano, P.; Nervi, J. 2020: Microstructural characterization of Inconel X750 alloy used in reactors components. Microscopy and Microanalysis 26(S 1): 95-96
Katsikini, M.; Paloura, E.; Boscherini, F.; D'Acapito, F.; Lioutas, C.; Doppalapudi, D. 2003: Microstructural characterization of Inx Ga1−x N MBE samples. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms 200: 114-119
Baqué, L.; Serquis, A. 2007: Microstructural characterization of La0.4Sr0.6Co0.8Fe0.2O3–δ films deposited by dip coating. Applied Surface Science 254(1): 213-218
Yuan, X.; Huang, S. 2015: Microstructural characterization of MWCNTs/magnesium alloy composites fabricated by powder compact laser sintering. Journal of Alloys and Compounds 620: 80-86
Cáceres, D.; Vergara, I.; González, R. 2003: Microstructural characterization of Mg O thin films grown by radio-frequency sputtering. Target and substrate-temperature effect. Journal of Applied Physics 93(7): 4300-4305
Kamrani, S.; Penther, D.; Ghasemi, A.; Riedel, R.; Fleck, C. 2018: Microstructural characterization of Mg-Si C nanocomposite synthesized by high energy ball milling. Advanced Powder Technology 29(7): 1742-1748
Aljarrah, M.; Parvez, M.; Li, J.; Essadiqi, E.; Medraj, M. 2007: Microstructural characterization of Mg–Al–Sr alloys. Science and Technology of Advanced Materials 8(4): 237-248
Rodrigues, P.; Braz Fernandes, F.M.; Paula, A.S.; Oliveira, J.P.; Ribeiro, S.B.; Texeira, E.N.; Schell, N. 2017: Microstructural characterization of Ni Ti shape memory alloy produced by rotary hot forging. Powder Diffraction 32(S 1): S201-S206
Shi, X.; Yu, K.; Jiang, L.; Li, C.; Li, Z.; Zhou, X. 2018: Microstructural characterization of Ni-201 weld cladding onto 304 stainless steel. Surface and Coatings Technology 334: 19-28
Solomon, V.C.; Smith, D.J.; Tang, Y.; Berkowitz, A.E. 2004: Microstructural characterization of Ni-Mn-Ga ferromagnetic shape memory alloy powders. Journal of Applied Physics 95(11): 6954-6956
Chun, E.; Park, C.; Nishikawa, H.; Kim, M. 2018: Microstructural characterization of Ni-based self-fluxing alloy after selective surface-engineering using diode laser. Applied Surface Science 442: 726-735
Farias, F.W.C.; Payão Filho, J.d.C.; da Silva Júnior, D.A.; de Moura, R.N.; Rios, M.C.G. 2019: Microstructural characterization of Ni-based superalloy 625 clad welded on a 9% Ni steel pipe by plasma powder transferred arc. Surface and Coatings Technology 374: 1024-1037
Thyden, K. 2008: Microstructural characterization of SOFC Ni–YSZ anode composites by low-voltage scanning electron microscopy. Solid State Ionics 178(39-40): 1984-1989
Alexandrov, I.V. 2001: Microstructural characterization of SPD processed materials. Metals and Materials International 7(6): 565-571
Wang, T.; Ivas, T.; Leinenbach, C.; Zhang, J. 2015: Microstructural characterization of Si 3 N 4 /42Cr Mo joint brazed with Ag–Cu–Ti + Ti Np composite filler. Journal of Alloys and Compounds 651: 623-630
Vicens, J.; Doreau, F.; Chermant, J. 1996: Microstructural characterization of Si Cf/ YMAS composites in the as-received and after thermomechanical tests. Composites Part A: Applied Science and Manufacturing 27(9): 723-727
Lu, W.; Zhang, D.; Zhang, X.; Wu, R.; Sakata, T.; Mori, H. 2001: Microstructural characterization of Ti B in in situ synthesized titanium matrix composites prepared by common casting technique. Journal of Alloys and Compounds 327(1-2): 240-247
Lu, W.; Zhang, D.; Zhang, X.; Wu, R.; Sakata, T.; Mori, H. 2001: Microstructural characterization of Ti C in in situ synthesized titanium matrix composites prepared by common casting technique. Journal of Alloys and Compounds 327(1-2): 248-252
Meisner, L.; Markov, A.; Rotshtein, V.; Ozur, G.; Meisner, S.; Yakovlev, E.; Semin, V.; Mironov, Y.; Poletika, T.; Girsova, S.; Shepel, D. 2018: Microstructural characterization of Ti-Ta-based surface alloy fabricated on Ti Ni SMA by additive pulsed electron-beam melting of film/substrate system. Journal of Alloys and Compounds 730: 376-385
Sizemore, J.; Barton, R.; Marshall, A.; Bravman, J.; Naito, M.; Char, K. 1989: Microstructural characterization of YBa/sub 2/Cu/sub 3/O/sub 7- delta / thin films on Sr Ti O/sub 3/ using four-axis X-ray diffraction. IEEE Transactions on Magnetics 25(2): 2245-2249
Sarikaya, M.; Thiel, B.L.; Aksay, I.A.; Weber, W.J.; Frydrych, W.S. 1987: Microstructural characterization of YBa2Cu3O7−x. Journal of Materials Research 2(6): 736-742
Berenov, A.; Malde, N.; Bugoslavsky, Y.; Cohen, L.F.; Foltyn, S.J.; Dowden, P.; Ramirez-Castellanos, J.; Gonzalez-Calbet, J.M.; Vallet-Regi, M.; MacManus-Driscoll, J.L. 2003: Microstructural characterization of Yba2Cu3O7–δ thick films grown at very high rates and high temperatures by pulsed laser deposition. Journal of Materials Research 18(4): 956-964
Alfano, D.; Scatteia, L.; Monteverde, F.; Bêche, E.; Balat-Pichelin, M. 2010: Microstructural characterization of Zr B2–Si C based UHTC tested in the MESOX plasma facility. Journal of the European Ceramic Society 30(11): 2345-2355
Bauer, F.; Willert-Porada, M. 2004: Microstructural characterization of Zr-phosphate–Nafion® membranes for direct methanol fuel cell (DMFC) applications. Journal of Membrane Science 233(1-2): 141-149
Marshall, G.J.; Ioannidis, E.K.; Sheppard, T. 1987: Microstructural characterization of a. Metallurgical Transactions A 18(4): 407-416
Cai, X.; Zhong, L.; Xu, Y.; Lu, Z.; Li, J.; Zhu, J.; Ding, Y.; Yan, H. 2018: Microstructural characterization of a V2C and V8C7 ceramic-reinforced Fe substrate surface compound layer by EBSD and TEM. Journal of Alloys and Compounds 747: 8-20
Raj, S.; Locci, I. 2001: Microstructural characterization of a directionally-solidified Ni–33 (at.%) Al–31Cr–3Mo eutectic alloy as a function of withdrawal rate. Intermetallics 9(3): 217-227
Gargarella, P.; Almeida, A.; Vilar, R.; Afonso, C.; Rios, C.; Bolfarini, C.; Botta, W.; Kiminami, C. 2009: Microstructural characterization of a laser remelted coating of Al91Fe4Cr3Ti2 quasicrystalline alloy. Scripta Materialia 61(7): 709-712
Plucknett, K.P.; Wilkinson, D.S. 1995: Microstructural characterization of a microwave-sintered silicon nitride based ceramic. Journal of Materials Research 10(6): 1387-1396
Chen, M.W.; Livi, K.J.T.; Hemker, K.J.; Wright, P.K. 2003: Microstructural characterization of a platinum-modified diffusion aluminide bond coat for thermal barrier coatings. Metallurgical and Materials Transactions A 34(10): 2289-2299
Ping, D.H.; Hono, K.; Inoue, A. 2000: Microstructural characterization of a rapidly solidified ultrahigh strength Al94.5Cr3Co1.5Ce1 alloy. Metallurgical and Materials Transactions A 31(3): 607-614
Andriano, L.T.; Ruocco, N.; Peterson, J.D.; Olds, D.; Helgeson, M.E.; Ntetsikas, K.; Hadjichristidis, N.; Costanzo, S.; Vlassopoulos, D.; Hjelm, R.P.; Leal, L.G. 2020: Microstructural characterization of a star-linear polymer blend under shear flow by using rheo-SANS. Journal of Rheology 64(3): 663-672
Keiser Jr., D.D.; Perez, E.; Wiencek, T.; Leenaers, A.; Van den Berghe, S. 2015: Microstructural characterization of a thin film Zr N diffusion barrier in an As-fabricated U–7Mo/Al matrix dispersion fuel plate. Journal of Nuclear Materials 458: 406-418
Ferroni, M.; Guidi, V.; Martinelli, G.; Sberveglieri, G. 1997: Microstructural characterization of a titanium-tungsten oxide gas sensor. Journal of Materials Research 12(3): 793-798
Shin, H.; Joo, M.H.; Moon, S.K.; Moon, T.H.; Park, K.H. 2012: Microstructural characterization of abnormal grain growth behavior of Al-doped Zn O in thin film solar cells. Surface and Interface Analysis 44(11-12): 1427-1430
Quan, Z.; Larimore, Z.; Qin, X.; Yu, J.; Mirotznik, M.; Byun, J.; Oh, Y.; Chou, T. 2016: Microstructural characterization of additively manufactured multi-directional preforms and composites via X-ray micro-computed tomography. Composites Science and Technology 131: 48-60
Stjernberg, J.; Lindblom, B.; Wikström, J.; Antti, M.; Odén, M. 2010: Microstructural characterization of alkali metal mediated high temperature reactions in mullite based refractories. Ceramics International 36(2): 733-740
Gao, L.; Harada, Y.; Kumai, S. 2015: Microstructural characterization of aluminum alloys using Weck's reagent, part I: Applications. Materials Characterization 107: 426-433
Pacaud, Y.; Skorupa, W.; Stoemenos, J. 1996: Microstructural characterization of amorphized and recrystallized 6H-Si C. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms 120(1-4): 181-185
Ghosh, J.; Mazumdar, S.; Das, M.; Ghatak, S.; Basu, A. 2008: Microstructural characterization of amorphous and nanocrystalline boron nitride prepared by high-energy ball milling. Materials Research Bulletin 43(4): 1023-1031
Feng, W.; Baiqing, X.; Yongan, Z.; Zhihui, L.; Peiyue, L. 2009: Microstructural characterization of an Al–Cu–Mg alloy containing Fe and Ni. Journal of Alloys and Compounds 487(1-2): 445-449
Keiser Jr., D.D.; Jue, J.; Gan, J.; Miller, B.D.; Robinson, A.B.; Madden, J.W.; Ross Finlay, M.; Moore, G.; Medvedev, P.; Meyer, M. 2017: Microstructural characterization of an irradiated RERTR-6 U-7Mo/AA4043 alloy dispersion fuel plate specimen blister-tested to a final temperature of 500 °C. Journal of Nuclear Materials 488: 100-122
Rivera, E.; Celaya, L.; Rincón, J. 1987: Microstructural characterization of an opal glass in the Na2OCd OSi O2 system. Materials Letters 5(5-6): 185-188
Shi, R.; Li, G.; Xia, Y.; Fan, Q.; Wang, F.; Zhang, H.; Cheng, X. 2017: Microstructural characterization of an α+β type Ti-5.5Mo-7.2Al-4.5Zr-2.6Sn-2.1Cr alloy during recrystallization annealing. Journal of Alloys and Compounds 705: 183-187
Wu, Y.Q.; Ping, D.H.; Hono, K.; Hamano, M.; Inoue, A. 2000: Microstructural characterization of an α-Fe/Nd2Fe14B nanocomposite magnet with a remaining amorphous phase. Journal of Applied Physics 87(12): 8658-8665
Benson, M.T.; He, L.; King, J.A.; Mariani, R.D. 2018: Microstructural characterization of annealed U-12Zr-4Pd and U-12Zr-4Pd-5Ln: Investigating Pd as a metallic fuel additive. Journal of Nuclear Materials 502: 106-112
Benson, M.T.; Xie, Y.; He, L.; Tolman, K.R.; King, J.A.; Harp, J.M.; Mariani, R.D.; Hernandez, B.J.; Murray, D.J.; Miller, B.D. 2019: Microstructural characterization of annealed U-20Pu-10Zr-3.86Pd and U-20Pu-10Zr-3.86Pd-4.3Ln. Journal of Nuclear Materials 518: 287-297
Benson, M.T.; He, L.; King, J.A.; Mariani, R.D.; Winston, A.J.; Madden, J.W. 2018: Microstructural characterization of as-cast U-20Pu-10Zr-3.86Pd and U-20Pu-10Zr-3.86Pd-4.3Ln. Journal of Nuclear Materials 508: 310-318
Jadernas, D.; Gan, J.; Keiser, D.; Madden, J.; Bachhav, M.; Jue, J.; Robinson, A. 2018: Microstructural characterization of as-fabricated and irradiated U-Mo fuel using SEM/EBSD. Journal of Nuclear Materials 509: 1-8
Deb, A.K.; Chatterjee, P.; Sen Gupta, S.P. 2007: Microstructural characterization of ball-milled α-Al2O3: bimodal size distribution and shape anisotropy. Journal of Applied Crystallography 40(1): 33-39
Neikter, M.; Huang, A.; Wu, X. 2019: Microstructural characterization of binary microstructure pattern in selective laser-melted Ti-6Al-4V. International Journal of Advanced Manufacturing Technology 104(1-4): 1381-1391
Matsuda, M.; Himeno, Y.; Shida, K.; Matsuda, M. 2020: Microstructural characterization of black-monoclinic oxygen defective Hf O2-x film formed on metal Hf plate in air. Ceramics International 46(5): 6796-6800
Xie, K.Y.; Domnich, V.; Farbaniec, L.; Chen, B.; Kuwelkar, K.; Ma, L.; McCauley, J.W.; Haber, R.A.; Ramesh, K.; Chen, M.; Hemker, K.J. 2017: Microstructural characterization of boron-rich boron carbide. Acta Materialia 136: 202-214
Ma †, X.L.; Zhu, Y.L.; Wang, X.H.; Zhou, Y.C. 2004: Microstructural characterization of bulk Ti3Al C2ceramics. Philosophical Magazine 84(28): 2969-2977
Laidani, N.; Miotello, A.; Glisenti, A.; Bottani, C.; Perriere, J. 1997: Microstructural characterization of carbon films and films produced by implantation. Journal of Physics: Condensed Matter 9(8): 1743-1761
Schlegel, M.L.; Necib, S.; Daumas, S.; Blanc, C.; Foy, E.; Trcera, N.; Romaine, A. 2016: Microstructural characterization of carbon steel corrosion in clay borehole water under anoxic and transient acidic conditions. Corrosion Science 109: 126-144
Liu, M.; Takata, N.; Suzuki, A.; Kobashi, M. 2018: Microstructural characterization of cellular Al Si10Mg alloy fabricated by selective laser melting. Materials-Design 157: 478-491
Sayagués, M.; Avilés, M.; Córdoba, J.; Alcalá, M.; Gotor, F. 2010: Microstructural characterization of ceramic–intermetallic composites using TEM related techniques. Journal of the European Ceramic Society 30(8): 1765-1774
Madi, C.; Tabbal, M.; Christidis, T.; Isber, S.; Nsouli, B.; Zahraman, K. 2007: Microstructural characterization of chromium oxide thin films grown by remote plasma assisted pulsed laser deposition. Journal of Physics: Conference Series 59: 600-604
Tu, J.; Zhou, K.; Zhou, Z.; Huang, C.; Chen, Z. 2019: Microstructural characterization of cobalt treated by laser surface melting under different powers. Progress in Natural Science: Materials International 29(1): 57-64
Du, X.; Zhu, J.; Kim, Y. 2001: Microstructural characterization of creep cavitation in a fully-lamellar Ti Al alloy. Intermetallics 9(2): 137-146
Smaga, M.; Skorupski, R.; Eifler, D.; Beck, T. 2017: Microstructural characterization of cyclic deformation behavior of metastable austenitic stainless steel AISi 347 with different surface morphology. Journal of Materials Research 32(23): 4452-4460
Field, K.G.; Gussev, M.N.; Busby, J.T. 2014: Microstructural characterization of deformation localization at small strains in a neutron-irradiated 304 stainless steel. Journal of Nuclear Materials 452(1-3): 500-508
Wu, C.; Chang, C.; Chen, D.; Tu, J.; Huang, C. 2018: Microstructural characterization of deformation-induced martensite in an ultrafine-grained medium Mn advanced high strength steel. Materials Science and Engineering: A721: 145-153
Elder, K.L.; Stan, T.; Sun, Y.; Xiao, X.; Voorhees, P.W. 2020: Microstructural characterization of dendritic evolution using two-point statistics. Scripta Materialia 182: 81-85
Venter, D.; O'Connell, J. 2020: Microstructural characterization of depth dependant crystal rotation in 593 Me V au irradiated Ni O at 45° incidence. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms 473: 43-47
Nistor, L.; Buschmann, V.; Ralchenko, V.; Dinca, G.; Vlasov, I.; Van Landuyt, J.; Fuess, H. 2000: Microstructural characterization of diamond films deposited on c-BN crystals. Diamond and Related Materials 9(3-6): 269-273
Kaul, R.; Ganesh, P.; Nath, A.K. 2005: Microstructural characterization of dissimilar laser weld between austenitic and ferritic stainless steels. Journal of Laser Applications 17(1): 21-29
Verma, P.; Lal, G.; Singh, M. 2021: Microstructural characterization of early Twentieth‐Century British period Indian copper coins. X-Ray Spectrometry 50(6): 482-490
Lee, B.; Yoon, Y.; Lee, K. 2001: Microstructural characterization of electroconductive Si3N4–Ti N composites. Materials Letters 47(1-2): 71-76
Mirak, M.; Akbari, A. 2018: Microstructural characterization of electrodeposited and heat-treated Ni-B coatings. Surface and Coatings Technology 349: 442-451
Vook, R.; Macur, J. 1976: Microstructural characterization of epitaxial Au/Cu bicrystals. Thin Solid Films 32(2): 199-203
Manda, P.; Singh, A. 2020: Microstructural characterization of failed bevel gear of aero-engine. Materials Today: Proceedings 26: 3216-3222
Xiong, Z.X.; Baba-kishi, K.Z.; Shin, F.G.; Lu, S.G. 1999: Microstructural characterization of ferroelectric Pb(Sc0.5Ta0.5)O3ceramics. Ferroelectrics 229(1): 153-158
Bohra, V.K.J.; Nerella, R.; Madduru, S.R.C.; Rohith, P. 2020: Microstructural characterization of fly ash based geopolymer. Materials Today: Proceedings 27: 1625-1629
Mao, Y.; Peng, L.; Wang, S.; Xi, L. 2017: Microstructural characterization of graphite/Cu Cr Zr joints brazed with Cu Ti H 2 Ni-based fillers. Journal of Alloys and Compounds 716: 81-87
Lan, Y.; Chen, Y.; He, J.; Chang, J. 2014: Microstructural characterization of high-quality indium tin oxide films deposited by thermionically enhanced magnetron sputtering at low temperature. Vacuum 107: 56-61
Laureys, A.; Depover, T.; Petrov, R.; Verbeken, K. 2016: Microstructural characterization of hydrogen induced cracking in TRIP-assisted steel by EBSD. Materials Characterization 112: 169-179
Godinho, V.; Lopez-Santos, C.; Rojas, T.; Philippon, D.; Jimenez de Haro, M.; Lucas, S.; Fernandez, A. 2012: Microstructural characterization of hydrophobic Ti1−x Alx N coatings with moth-eye-like surface morphology. Journal of Alloys and Compounds 536: S398-S406
Guo, S.; Kagawa, Y.; Saito, H.; Masuda, C. 1998: Microstructural characterization of interface in Si C fiber-reinforced Ti–15V–3Cr–3Al–3Sn matrix composite. Materials Science and Engineering: A246(1-2): 25-35
Brunet-Bruneau, A.; Souche, D.; Fisson, S.; Nguyen Van, V.; Vuye, G.; Abeles, F.; Rivory, J. 1998: Microstructural characterization of ion assisted Si O2 thin films by visible and infrared ellipsometry. Journal of Vacuum Science-Technology A: Vacuum, Surfaces, and Films 16(4): 2281-2286
Horton, L.; Bentley, J.; Romana, L.; Perez, A.; McHargue, C.; McCallum, J. 1992: Microstructural characterization of iron ion implantation of silicon carbide. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms 65(1-4): 345-351
Gan, J.; Miller, B.; Keiser Jr., D.; Robinson, A.; Madden, J.; Medvedev, P.; Wachs, D. 2014: Microstructural characterization of irradiated U–7Mo/Al–5Si dispersion fuel to high fission density. Journal of Nuclear Materials 454(1-3): 434-445
Jha, A.; Elmadani, E.; Peralli, T.; S Duggal, M.; Walsh, D.; Jappy, C.; Brown, T.; Sibbett, W. 2014: Microstructural characterization of laser sintered synthetic calcium phosphate-natural dentine interface for the restoration of enamel surface. AIMS Materials Science 1(3): 132-142
Hidalgo, A.; Petit, S.; Domingo, C.; Alonso, C.; Andrade, C. 2007: Microstructural characterization of leaching effects in cement pastes due to neutralisation of their alkaline nature. Cement and Concrete Research 37(1): 63-70
Jayalakshmi, M.; Huilgol, P.; Bhat, B.R.; Bhat, K.U. 2016: Microstructural characterization of low temperature plasma-nitrided 316L stainless steel surface with prior severe shot peening. Materials-Design 108: 448-454
Barat, P.; Chatterjee, A.; Mukherjee, P.; Gayathri, N.; Jayakumar, T.; Raj, B. 2010: Microstructural characterization of materials by neural network technique. Physics Letters A 375(1): 6-10
Marinković, Z.; Mančić, L.; Vulić, P.; Milošević, O. 2005: Microstructural characterization of mechanically activated Zn O–Cr2O3 system. Journal of the European Ceramic Society 25(12): 2081-2084
Prosviryakov, A.; Shcherbachev, K.; Tabachkova, N. 2015: Microstructural characterization of mechanically alloyed Al–Cu–Mn alloy with zirconium. Materials Science and Engineering: A623: 109-113
Salahinejad, E.; Hadianfard, M.; Ghaffari, M.; Amini, R.; Bagheri Mashhadi, S.; Okyay, A. 2013: Microstructural characterization of medical-grade stainless steel powders prepared by mechanical alloying and subsequent annealing. Advanced Powder Technology 24(3): 605-608
Chawake, N.; Zálešák, J.; Gammer, C.; Franz, R.; Cordill, M.J.; Kim, J.T.; Eckert, J. 2020: Microstructural characterization of medium entropy alloy thin films. Scripta Materialia 177: 22-26
Tokitani, M.; Masuzaki, S.; Yoshida, N.; Sagara, A.; Noda, N.; Yamada, H. 2013: Microstructural characterization of mixed-material deposition layer on the LHD divertor tiles by using nano-geological diagnosis. Journal of Nuclear Materials 438: S818-S821
Bascoul, A.; Turatsinze, A. 1994: Microstructural characterization of mode i crack opening in mortar. Materials and Structures 27(2): 71-78
Arshad, A.; Yajid, M.A.M.; Idris, M.H. 2021: Microstructural characterization of modified plasma spray LZ/YSZ thermal barrier coating by laser glazing. Materials Today: Proceedings 39: 941-946
Lee, M.; Chang, I.; Dobson, P.; Cantor, B. 1994: Microstructural characterization of nanocomposite thin films of AgSi O2, AgZn O and AgSi. Materials Science and Engineering: A179-180: 545-551
Garciamartinez, O.; Rojas, R.; Vila, E.; Devidales, J. 1993: Microstructural characterization of nanocrystals of Zn O and Cu O obtained from basic salts. Solid State Ionics 63-65: 442-449
Wang, Z.; Ouyang, J.; Wang, Y.; Xie, L.; Ma, Y.; Liu, Z.; Henniche, A.; Wang, Y. 2019: Microstructural characterization of nanostructured Al2O3-Zr O2 eutectic layer by laser rapid solidification method. Applied Surface Science 476: 335-341
Herring, R.A.; Northwood, D.O. 1988: Microstructural characterization of neutron-irradiated and post-irradiation annealed Zircaloy-2. Journal of Nuclear Materials 159: 386-396
Chayasombat, B.; Yordsri, V.; Oikawa, T.; Thanachayanont, C. 2015: Microstructural characterization of nickel hydroxide films deposited using an ammonia-induced method and subsequently calcined nickel oxide films. Materials Science in Semiconductor Processing 34: 224-229
Luo, Z.; Mishin, O.; Zhang, Y.; Zhang, H.; Lu, K. 2012: Microstructural characterization of nickel subjected to dynamic plastic deformation. Scripta Materialia 66(6): 335-338
Kustas, F.; Misra, M.; Williamson, D. 1988: Microstructural characterization of nitrogen implanted 440C steel. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms 31(3): 393-401
Dubiel, B.; Chmielewski, M.; Moskalewicz, T.; Gruszczyński, A.; Czyrska-Filemonowicz, A. 2014: Microstructural characterization of novel Mo–Re–Al2O3 composite. Materials Letters 124: 137-140
Ho, H.L.; Bauer, C.L.; Mahajan, S.; Laughlin, D.E.; Milnes, A.G. 1996: Microstructural characterization of ordered nickel silicide structures grown on (111) nickel silicide films. Journal of Materials Research 11(4): 904-911
Kim, H.G.; Lim, S.H. 2017: Microstructural characterization of oxide layers formed on Ni-20Cr-8Al alloy foam using transmission electron microscopy. Surface and Interface Analysis 49(9): 880-884
Lee, T.W.; Park, H.W.; Lim, H.; Kim, S.K.; Lim, S.H. 2017: Microstructural characterization of oxide layers in Ca O added AZ31 Mg alloy. Journal of Alloys and Compounds 714: 397-408
Powers, M.; Derby, B.; Shaw, A.; Raeker, E.; Misra, A. 2020: Microstructural characterization of phase-separated co-deposited Cu–Ta immiscible alloy thin films. Journal of Materials Research 35(12): 1531-1542
Bhat, H.; Clayton, C.; Herman, H.; Jach, J.; Zatorski, R. 1980: Microstructural characterization of plasma-sprayed ferrous alloys. Thin Solid Films 72(1): 153-160
Wang, L.; Li, M.; Almer, J.; Bieler, T.; Barabash, R. 2013: Microstructural characterization of polycrystalline materials by synchrotron X-rays. Frontiers of Materials Science 7(2): 156-169
Kuo, H.; Wang, W.; Hsu, Y. 2006: Microstructural characterization of precipitates in Cu–10wt.%Al–0.8wt.%Be shape-memory alloy. Materials Science and Engineering: A430(1-2): 292-300
Asgari, M.; Barnoush, A.; Johnsen, R.; Hoel, R. 2011: Microstructural characterization of pulsed plasma nitrided 316L stainless steel. Materials Science and Engineering: A529: 425-434
Moorthy, V.; Vaidyanathan, S.; Jayakumar, T.; Raj, B. 1997: Microstructural characterization of quenched and tempered 0.2% carbon steel using magnetic Barkhausen noise analysis. Journal of Magnetism and Magnetic Materials 171(1-2): 179-189
Alarco, J.A.; Olsson, E.; Golden, S.J.; Bhargava, A.; Yamashita, T.; Barry, J.; Mackinnon, I.D.R. 1997: Microstructural characterization of quenched melt-textured YBa2Cu3O7−δ materials. Journal of Materials Research 12(3): 624-635
Kim, J.H.; Holloway, P.H. 2002: Microstructural characterization of radio frequency magnetron sputter-deposited Ga2O3:Mn phosphor thin films. Journal of Vacuum Science-Technology A: Vacuum, Surfaces, and Films 20(3): 928-933
Samuel, F.H. 1986: Microstructural characterization of rapidly solidified Al-Li-Co powders. Metallurgical Transactions A 17(1): 73-91
Singh, S.; Lele, S.; Suryanarayana, C. 1987: Microstructural characterization of rapidly solidified Al-Ta alloys. Metallurgical Transactions A 18(11): 1915-1922
Srivastava, A.K.; Ranganathan, S. 2001: Microstructural characterization of rapidly solidified Al–Fe–Si, Al–V–Si, and Al–Fe–V–Si alloys. Journal of Materials Research 16(7): 2103-2117
Kursun, C.; Gögebakan, M.; Gencer, Y. 2015: Microstructural characterization of rapidly solidified Cu 50 Zr 40 Ni 5 Ti 5 amorphous alloy. Journal of Alloys and Compounds 643: S33-S38
Singh, B.; Zhang, J.; Hwang, B.; Vook, R. 1982: Microstructural characterization of rotating Cu-Cu electrical contacts in vacuum and wet CO2 environments. Wear 78(1-2): 17-28
Larson, D.; Liu, C.; Miller, M. 1997: Microstructural characterization of segregation and precipitation in α2+γ titanium aluminides. Materials Science and Engineering: A239-240: 220-228
Mekonnen, W.; Arstad, B.; Klette, H.; Walmsley, J.C.; Bredesen, R.; Venvik, H.; Holmestad, R. 2008: Microstructural characterization of self-supported 1.6μm Pd/Ag membranes. Journal of Membrane Science 310(1-2): 337-348
Singh, J.J.; Pater, R.H.; Eftekhari, A. 1998: Microstructural characterization of semi-interpenetrating polymer networks by positron lifetime spectroscopy. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms 134(1): 113-120
Giust, G.K.; Sigmon, T.W. 1997: Microstructural characterization of solid-phase crystallized amorphous silicon films recrystallized using an excimer laser. Applied Physics Letters 70(6): 767-769
Impey, S.A.; Huang, Z.; Patel, A.; Beanland, R.; Shorrocks, N.M.; Watton, R.; Whatmore, R.W. 1998: Microstructural characterization of sol–gel lead–zirconate–titanate thin films. Journal of Applied Physics 83(4): 2202-2208
Hayun, S.; Kalabukhov, S.; Ezersky, V.; Dariel, M.; Frage, N. 2010: Microstructural characterization of spark plasma sintered boron carbide ceramics. Ceramics International 36(2): 451-457
Lim, J.; Jeong, J.K.; Ahn, K.H.; Kim, H.J.; Hwang, C.S.; Park, D.; Lee, D. 2004: Microstructural characterization of sputter-deposited Pt thin film electrode. Journal of Materials Research 19(2): 460-468
Paloura, E.; Ginoudi, A.; Markwitz, A.; Lioutas, C.; Katsikini, M.; Bethge, K.; Aminpirooz, S.; Rossner, H.; Holub-Krappe, E.; Zorba, T.; Siapkas, D. 1996: Microstructural characterization of stoichiometric buried Si3N4 films. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms 113(1-4): 227-230
Liang, C.; Liu, L.; Li, H.; Qian, D.; Liu, C.; Jia, J.; Chen, J. 2016: Microstructural characterization of sulfur-doped Bi 2 Te 3 crystals. Materials Characterization 114: 172-178
Ye, F.; Mori, T.; Ou, D.R.; Zou, J.; Drennan, J. 2007: Microstructural characterization of terbium-doped ceria. Materials Research Bulletin 42(5): 943-949
Cheng, X.; Bai, B.; Gao, Y.; Feng, C. 2009: Microstructural characterization of the Al/Cu/steel diffusion bonded joint. Rare Metals 28(5): 478-481
Hu, X.B.; Qin, X.Z.; Hou, J.S.; Zhou, L.Z.; Ma, X.L. 2017: Microstructural characterization of the M23C6 carbide in a long-term aged Ni-based superalloy. Philosophical Magazine Letters 97(2): 43-49
Wu, Y.; Huang, D.; Izumi, T.; Nomura, K.; Nakamura, Y.; Adachi, S.; Shiohara, Y.; Tanabe, K. 2002: Microstructural characterization of the Nd Ba2Cu3O7−δ islands fabricated by liquid phase epitaxy. Physica C: Superconductivity 377(3): 393-398
Jiménez, E.; Béjar, L.; Aguilar, C.; Alfonso, I.; Hernandez, O. 2021: Microstructural characterization of the Ti-30Nb-6Sn alloy synthesized by mechanical alloying. Microscopy and Microanalysis 27(S 1): 574-576
Aitkaliyeva, A.; Adkins, C.A.; Hirschhorn, J.; McKinney, C.; Tonks, M.R.; Di Lemma, F.G. 2019: Microstructural characterization of the as-cast and annealed Pu-10Zr alloy. Journal of Nuclear Materials 523: 80-90
Dalili, N.; Clark, M.; Davari, E.; Ivey, D. 2016: Microstructural characterization of the cycling behavior of electrodeposited manganese oxide supercapacitors using 3D electron tomography. Journal of Power Sources 328: 318-328
Ayer, R.; Angers, L.M.; Mueller, R.R.; Scanlon, J.C.; Klein, C.F. 1988: Microstructural characterization of the dispersed phases in Al-Ce-Fe system. Metallurgical Transactions A 19(7): 1645-1656
Guo, S.Q.; Kagawa, Y. 1998: Microstructural characterization of the matrix in the Si C fiber-reinforced Ti-15-3 composite. Metallurgical and Materials Transactions A 29(2): 702-705
Perez, T.; Ghanbaja, J.; Mathieu, S.; Latu-Romain, L.; Vilasi, M.; Wouters, Y. 2020: Microstructural characterization of the protective oxide scale forming on Ni–25Cr–x Mn (x = 0.5, 1 and 1.5% wt) in a 200 Pa O2 environment at 1050 °C. Scripta Materialia 178: 176-180
Gómez-Rebollo, E.; Herrero, P.; Rojas, R. 1997: Microstructural characterization of the stabilized fluorite phases formed in the Ca1−y Lay U2O6+x (0 ≤ y ≤ 0.8) system. Journal of Nuclear Materials 245(2-3): 161-168
Hu, X.B.; Guo, X.W.; Wang, Y.J.; Hou, J.S.; Qin, X.Z.; Zhou, L.Z.; Liu, J.F.; Ma, X.L. 2017: Microstructural characterization of the η-Ni3(Ti, Al) phase in a long-term-aged Ni-based superalloy. Philosophical Magazine Letters 97(11): 442-449
Leonard, K.J.; Kang, S.; Goyal, A.; Yarborough, K.A.; Kroeger, D.M. 2003: Microstructural characterization of thick YBa2Cu3O7−δ films on improved rolling-assisted biaxially textured substrates. Journal of Materials Research 18(7): 1723-1732
Curiel, M.; Nedev, N.; Nesheva, D.; Soares, J.; Haasch, R.; Sardela, M.; Valdez, B.; Sankaran, B.; Manolov, E.; Bineva, I.; Petrov, I. 2010: Microstructural characterization of thin Si Ox films obtained by physical vapor deposition. Materials Science and Engineering: B174(1-3): 132-136
Singh, J. 1993: Microstructural characterization of thin polymer films using the Langley low energy positron flux generator. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms 79(1-4): 349-352
Li, J.; Yu, Z.; Wang, H.; Li, M. 2010: Microstructural characterization of titanium matrix composite coatings reinforced by in situ synthesized Ti B + Ti C fabricated on Ti6Al4V by laser cladding. Rare Metals 29(5): 465-472
Sabeena, M.; George, A.; Murugesan, S.; Divakar, R.; Mohandas, E.; Vijayalakshmi, M. 2016: Microstructural characterization of transformation products of bcc β in Ti-15 Mo alloy. Journal of Alloys and Compounds 658: 301-315
Pereloma, E.; Timokhina, I.; Jonas, J.; Miller, M. 2007: Microstructural characterization of warm rolled Cr-containing low carbon steel. Scripta Materialia 56(6): 521-524
Ma, H.; Li, Y.; Puchkov, U.; Wang, J. 2008: Microstructural characterization of welded zone for Fe3Al/Q235 fusion-bonded joint. Materials Chemistry and Physics 112(3): 810-815
Huang, N.; Colligon, J.; Kheyrandish, H.; Tang, Y. 1993: Microstructural characterization of zirconia films produced by the dual ion beam deposition technique. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms 80-81: 1101-1103
Qian, W.; Skowronski, M.; De Graef, M.; Doverspike, K.; Rowland, L.B.; Gaskill, D.K. 1995: Microstructural characterization of α‐Ga N films grown on sapphire by organometallic vapor phase epitaxy. Applied Physics Letters 66(10): 1252-1254
Yang, S.; Chen, Y.; Chen, C.; Huang, W.; Lin, D. 2015: Microstructural characterization of δ/γ/σ/γ2/χ phases in silver-doped 2205 duplex stainless steel under 800 °C aging. Journal of Alloys and Compounds 633: 48-53
Chen, Z.; Wu, W.; Chen, Z.; Cong, X.; Qiu, J. 2012: Microstructural characterization on Zr C doped carbon/carbon composites. Ceramics International 38(1): 761-767
Wu, S.; Ping, D.; Yamabe-Mitarai, Y.; Kitashima, T.; Li, G.; Yang, R. 2013: Microstructural characterization on martensitic α″ phase in Ti–Nb–Pd alloys. Journal of Alloys and Compounds 577: S423-S426
Bansal, G.; Bandhu Singh, D.; Singh Virk, H.; Devrani, A.; Bhandari, A. 2020: Microstructural characterization, applications and process study of various additive manufacturing process: a review. Materials Today: Proceedings 26: 833-837
Sáenz-Trevizo, A.; Amézaga-Madrid, P.; Pizá-Ruiz, P.; Solís-Canto, O.; Ornelas-Gutiérrez, C.; Pérez-García, S.; Miki-Yoshida, M. 2014: Microstructural characterization, optical and photocatalytic properties of bilayered Cu O and Zn O based thin films. Journal of Alloys and Compounds 615: S375-S381
Jiang, B.; Wu, M.; Zhang, M.; Zhao, F.; Zhao, Z.; Liu, Y. 2017: Microstructural characterization, strengthening and toughening mechanisms of a quenched and tempered steel: Effect of heat treatment parameters. Materials Science and Engineering: A707: 306-314
Cheng, W.; Wang, M.; Que, Z.; Wang, H.; Zhang, J.; Xu, C.; You, B.; Yim, C. 2014: Microstructural characterizations and mechanical properties of Mg-8Sn-1Al-1Zn-x Cu alloys. Journal of Wuhan University of Technology-Mater. Sci. Ed. 29(4): 803-807
Tekoğlu, E.; Ağaoğulları, D.; Mertdinç, S.; Paksoy, A.H.; Öveçoğlu, M.L. 2018: Microstructural characterizations and mechanical properties of Nb B2 and VB particulate-reinforced eutectic Al-12.6 wt% Si composites via powder metallurgy method. Advanced Powder Technology 29(9): 2070-2081
Karch, A.; Sornin, D.; Barcelo, F.; Bosonnet, S.; de Carlan, Y.; Logé, R. 2015: Microstructural characterizations of 14Cr ODS ferritic steels subjected to hot torsion. Journal of Nuclear Materials 459: 53-61
Yang, Y.; Zhang, S.; Huang, H.; Chen, Y.; Liu, Z.; Liu, J. 2005: Microstructural characterizations of ferroelectromagnet lead iron niobate crystals. Materials Letters 59(14-15): 1767-1770
Dutta, I.; Kumar, P.; Subbarayan, G. 2009: Microstructural coarsening in Sn-Ag-based solders and its effects on mechanical properties. JOM 61(6): 29-38
Huang, Y.; Zhang, H.; Auger, M.A.; Hong, Z.; Ning, H.; Gorley, M.J.; Grant, P.S.; Reece, M.J.; Yan, H.; Roberts, S.G. 2017: Microstructural comparison of effects of hafnium and titanium additions in spark-plasma-sintered Fe-based oxide-dispersion strengthened alloys. Journal of Nuclear Materials 487: 433-442
Martinez, N.; Kumar, N.; Mishra, R.S.; Doherty, K.J. 2018: Microstructural comparison of friction-stir-welded aluminum alloy 7449 starting from different tempers. Journal of Materials Science 53(12): 9273-9286
Živcová-Vlčková, Z.; Locs, J.; Keuper, M.; Sedlářová, I.; Chmelíčková, M. 2012: Microstructural comparison of porous oxide ceramics from the system Al2O3–Zr O2 prepared with starch as a pore-forming agent. Journal of the European Ceramic Society 32(10): 2163-2172
The, D.; Grieshammer, S.; Schroeder, M.; Martin, M.; Al Daroukh, M.; Tietz, F.; Schefold, J.; Brisse, A. 2015: Microstructural comparison of solid oxide electrolyser cells operated for 6100 h and 9000 h. Journal of Power Sources 275: 901-911
Shimada, Y.; Hata, S.; Ikeda, K.; Nakashima, H.; Matsumura, S.; Tanaka, H.; Yamamoto, A.; Shimoyama, J.; Kishio, K. 2016: Microstructural connectivity in sintered ex-situ Mg B2 bulk superconductors. Journal of Alloys and Compounds 656: 172-180
Huang, Z.; Conway, P.P.; Thomson, R.C. 2007: Microstructural considerations for ultrafine lead free solder joints. Microelectronics Reliability 47(12): 1997-2006
Amir H. Motaman, S.; Prahl, U. 2019: Microstructural constitutive model for polycrystal viscoplasticity in cold and warm regimes based on continuum dislocation dynamics. Journal of the Mechanics and Physics of Solids 122: 205-243
Sattler, M.; Jesser, W. 1984: Microstructural contributions to bubble growth in helium ion irradiated nickel. Journal of Nuclear Materials 122(1-3): 523-530
Rice, A.K.; Malloy, K.J. 2001: Microstructural contributions to hole transport in p-type Ga N:Mg. Journal of Applied Physics 89(5): 2816-2825
Zheng, X.; Liu, K.; Wang, Z.; Li, S.; Du, W. 2015: Microstructural control and hardening response of Mg–6Zn–0.5Er–0.5Ca alloy. Rare Metals 35(7): 526-531
Santos, R.; Horta, R.; Pereira, J.; Nunes, T.; Rocha, P.; Canongia Lopes, J.; Colaço, R. 2015: Microstructural control and hydration of novel micro-dendritic clinkers with Ca O/Si O 2 = 1.4. Cement and Concrete Research 76: 212-221
Rahdari, M.; Reihanian, M.; Baghal, S.L. 2018: Microstructural control and layer continuity in deformation bonding of metallic laminated composites. Materials Science and Engineering: A738: 98-110
Imam, M.; Ueji, R.; Fujii, H. 2015: Microstructural control and mechanical properties in friction stir welding of medium carbon low alloy S45C steel. Materials Science and Engineering: A636: 24-34
Zhao, E.; Niu, H.; Zhang, S.; Feng, L.; Yang, S. 2017: Microstructural control and mechanical properties of a β-solidified γ-Ti Al alloy Ti-46Al-2Nb-1.5V-1Mo-Y. Materials Science and Engineering: A701: 1-6
Liu, C.; Maziasz, P. 1998: Microstructural control and mechanical properties of dual-phase Ti Al alloys. Intermetallics 6(7-8): 653-661
Takasugi, T. 2000: Microstructural control and mechanical properties of nickel silicides. Intermetallics 8(5-6): 575-584
Zhang, Y.; Peng, W.j. 2012: Microstructural control and properties optimization of high-entrop alloys. Procedia Engineering 27: 1169-1178
Yang, J.; Zhang, X.; Ma, G.; Lin, P.; Xu, Y.; Lin, T.; He, P.; Liu, Z.; Long, W.; Li, J. 2021: Microstructural control and reinforcement mechanism of the Mo and B inserts in the Si Cf/Si C composites/Ni-based superalloy joint. Journal of the European Ceramic Society 41(7): 4025-4036
Turcaud, J.; Morrison, K.; Berenov, A.; Alford, N.; Sandeman, K.; Cohen, L. 2013: Microstructural control and tuning of thermal conductivity in La0.67Ca0.33Mn O3±δ. Scripta Materialia 68(7): 510-513
Vora-ud, A.; Kumar, M.; Jin, S.b.; Muthitamongkol, P.; Horprathum, M.; Thaowonkaew, S.; Chao-moo, W.; Thanachayanont, C.; Thang, P.B.; Seetawan, T.; Han, J.G. 2018: Microstructural control by substrate heating in Pulse-DC sputtering induced thermoelectric Ge2Sb2Te5 thin films. Journal of Alloys and Compounds 763: 430-435
Liang, Y.; Cheng, X.; Li, J.; Wang, H. 2017: Microstructural control during laser additive manufacturing of single-crystal nickel-base superalloys: new processing–microstructure maps involving powder feeding. Materials-Design 130: 197-207
Mishima, Y.; Miura, S.; Kimura, Y. 1995: Microstructural control for ductilization of multi-phase alloys based on B2 Co Al. Materials Science and Engineering: A192-193: 748-755
Kimura, Y.; Hayashi, K.; Handa, K.; Mishima, Y. 2002: Microstructural control for strengthening the γ-Fe/E21–(Fe, Mn)3Al Cx alloys. Materials Science and Engineering: A329-331: 680-685
Salishchev, G.A.; Imayevare, R.I.; Senkov, O.N.; Froes, F.H. 2000: Microstructural control in Ti-Al for enhanced mechanical properties. JOM 52(12): 46-48
Ravi, G.; Qiu, C.; Attallah, M.M. 2016: Microstructural control in a Ti-based alloy by changing laser processing mode and power during direct laser deposition. Materials Letters 179: 104-108
Hoo, N.; Goodwin, P.S.; Brydson, R.M.; Tsakiropoulos, P.; Ward-Close, C.M.; Froes, F.H. 1996: Microstructural control in a gamma-Ti Al alloy by MA and HIPing. JOM 48(7): 40-41
Srinivasan, N.; Prasad, Y.V.R.K. 1994: Microstructural control in hot working of IN-718 superalloy using processing map. Metallurgical and Materials Transactions A 25(10): 2275-2284
Shi, R.; Khairallah, S.A.; Roehling, T.T.; Heo, T.W.; McKeown, J.T.; Matthews, M.J. 2020: Microstructural control in metal laser powder bed fusion additive manufacturing using laser beam shaping strategy. Acta Materialia 184: 284-305
Miura, S.; Ohkubo, K.; Mohri, T. 2007: Microstructural control of Nb–Si alloy for large Nb grain formation through eutectic and eutectoid reactions. Intermetallics 15(5-6): 783-790
Abe, H.; Murata, K.; Fukui, T.; Moon, W.; Kaneko, K.; Naito, M. 2006: Microstructural control of Ni–YSZ cermet anode for planer thin-film solid oxide fuel cells. Thin Solid Films 496(1): 49-52
Kim, M.; Choi, K.; Zhu, J.; Zhang, F.; Song, Y.; Kim, Y.; Yi, S.; Park, J.S. 2017: Microstructural control of Ti-Al-Mo-Nb alloy system with respect to variation of B. Metals and Materials International 23(4): 625-631
Viatella, J.; Singh, R.K. 1998: Microstructural control of amorphous silicon films crystallized using an excimer laser. Journal of Materials Research 13(8): 2105-2109
Morita, S.; Iijima, M.; Tatami, J. 2018: Microstructural control of green bodies prepared from Si-based multi-component non-aqueous slurries and their effects on fabrication of Si3N4 ceramics through post-reaction sintering. Advanced Powder Technology 29(12): 3199-3209
Kajiura, H.; Tanabe, Y.; Yasuda, E.; Kaiho, A.; Shiota, I.; Yamada, S. 1998: Microstructural control of pitch matrix carbon-carbon composite by iodine treatment. Journal of Materials Research 13(2): 302-307
Bonache, V.; Salvador, M.; Rocha, V.; Borrell, A. 2011: Microstructural control of ultrafine and nanocrystalline WC–12Co–VC/Cr3C2 mixture by spark plasma sintering. Ceramics International 37(3): 1139-1142
Ramos, M. J.; Espinoza, D N.; Goldfarb, E. J.; Tisato, N.; Laubach, S. E.; Torres-Verdín, C. 2018: Microstructural controls on elastic anisotropy of finely laminated Mancos Shale. Geophysical Journal International 216(2): 991-1004
Heap, M.J.; Lavallée, Y.; Petrakova, L.; Baud, P.; Reuschlé, T.; Varley, N.R.; Dingwell, D.B. 2014: Microstructural controls on the physical and mechanical properties of edifice‐forming andesites at Volcán de Colima, Mexico. Journal of Geophysical Research: Solid Earth 119(4): 2925-2963
Geng, J.; Liu, G.; Wang, F.; Hong, T.; Dai, J.; Wang, M.; Chen, D.; Ma, N.; Wang, H. 2017: Microstructural correlated damage mechanisms of the high-cycle fatigued in-situ Ti B 2 /Al-Cu-Mg composite. Materials-Design 135: 423-438
Shastri, H.; Mondal, A.; Dutta, K.; Dieringa, H.; Kumar, S. 2020: Microstructural correlation with tensile and creep properties of AZ91 alloy in three casting techniques. Journal of Manufacturing Processes 57: 566-573
Bencher, C.D.; Dauskardt, R.H.; Ritchie, R.O. 1995: Microstructural damage and fracture processes in a composite solid rocket propellant. Journal of Spacecraft and Rockets 32(2): 328-334
Hiremath, C. P.; Senthilnathan, K.; Naik, N. K.; Guha, A.; Tewari, A. 2018: Microstructural damage based micromechanics model to predict stiffness reduction in damaged unidirectional composites. Journal of Reinforced Plastics and Composites 37(12): 797-807
Hiremath, C.P.; Senthilnathan, K.; Naik, N.; Guha, A.; Tewari, A. 2018: Microstructural damage based modeling of thermal conductivity of cyclically loaded CFRP. Composites Science and Technology 154: 37-44
Senthilnathan, K.; Hiremath, C.P.; Naik, N.; Guha, A.; Tewari, A. 2017: Microstructural damage dependent stiffness prediction of unidirectional CFRP composite under cyclic loading. Composites Part A: Applied Science and Manufacturing 100: 118-127
Thomas, M.; Turner, S.; Jackson, M. 2010: Microstructural damage during high-speed milling of titanium alloys. Scripta Materialia 62(5): 250-253
Koyama, M.; Kaneko, T.; Sawaguchi, T.; Tsuzaki, K. 2018: Microstructural damage evolution and arrest in binary Fe–high-Mn alloys with different deformation temperatures. International Journal of Fracture 213(2): 193-206
Jin, C.; Onuoha, C.C.; Farhat, Z.N.; Kipouros, G.J.; Plucknett, K. 2017: Microstructural damage following reciprocating wear of Ti C-stainless steel cermets. Tribology International 105: 201-218
Yang, Q.; Kalathiparambil, K.; Elg, D.; Ruzic, D.; Kriven, W. 2017: Microstructural damage of α-Al2O3 by high energy density plasma. Acta Materialia 132: 479-490
Harris, K.A.; Myers, T.H.; Yanka, R.W.; Mohnkern, L.M.; Green, R.W.; Otsuka, N. 1990: Microstructural defect reduction in Hg Cd Te grown by photoassisted molecular‐beam epitaxy. Journal of Vacuum Science-Technology A: Vacuum, Surfaces, and Films 8(2): 1013-1019
Braunn, P.R.; Ribeiro, A.M.; Ferigolo, J. 2014: Microstructural defects and enamel hypoplasia in teeth of Toxodon Owen, 1837 from the Pleistocene of Southern Brazil. Lethaia 47(3): 418-431
Ordoñez-Casanova, E.; Romero-Dominguez, R.; Galicia, M.; Trejo-Mandujano, H.A. 2021: Microstructural defects in AISi 4000 series steel subjected to a 3% Na Cl corrosion process. Microscopy and Microanalysis 27(S 1): 1590-1592
Han, W.; Li, B. 2018: Microstructural defects in He-irradiated polycrystalline α-Si C at 1000 °C. Journal of Nuclear Materials 504: 161-165
Kondo, S.; Katoh, Y.; Snead, L. 2008: Microstructural defects in Si C neutron irradiated at very high temperatures. Journal of Nuclear Materials 382(2-3): 160-169
Liu, T.; Guessasma, S.; Zhu, J.; Zhang, W.; Nouri, H.; Belhabib, S. 2018: Microstructural defects induced by stereolithography and related compressive behaviour of polymers. Journal of Materials Processing Technology 251: 37-46
Heckman, N.M.; Berwind, M.F.; Eberl, C.; Hodge, A.M. 2018: Microstructural deformation in fatigued nanotwinned copper alloys. Acta Materialia 144: 138-144
Galetz, M.; Oskay, C.; Madloch, S. 2019: Microstructural degradation and interdiffusion behavior of Ni Al and Ge-modified Ni Al coatings deposited on Alloy 602 CA. Surface and Coatings Technology 364: 211-217
Tong, J.; Yagi, K.; Zheng, Y.; Feng, Q. 2017: Microstructural degradation and its corresponding mechanical property of wrought superalloy GH4037 caused by very high temperature. Journal of Alloys and Compounds 690: 542-552
Zhang, X.; Zhao, Y.; Withers, P.J.; Xiao, P. 2018: Microstructural degradation of Electron Beam-Physical Vapour Deposition Thermal Barrier Coating during thermal cycling tracked by X-ray micro-computed tomography. Scripta Materialia 152: 79-83
Watkins, J.K.; Butt, D.P.; Jaques, B.J. 2019: Microstructural degradation of UN and UN-UO2 composites in hydrothermal oxidation conditions. Journal of Nuclear Materials 518: 30-40
Kontis, P.; Collins, D.M.; Wilkinson, A.J.; Reed, R.C.; Raabe, D.; Gault, B. 2018: Microstructural degradation of polycrystalline superalloys from oxidized carbides and implications on crack initiation. Scripta Materialia 147: 59-63
Taiwo, O.O.; Paz-García, J.M.; Hall, S.A.; Heenan, T.M.; Finegan, D.P.; Mokso, R.; Villanueva-Pérez, P.; Patera, A.; Brett, D.J.; Shearing, P.R. 2017: Microstructural degradation of silicon electrodes during lithiation observed via operando X-ray tomographic imaging. Journal of Power Sources 342: 904-912
Mostafaei, M.; Shamanian, M.; Purmohamad, H.; Amini, M.; Saatchi, A. 2011: Microstructural degradation of two cast heat resistant reformer tubes after long term service exposure. Engineering Failure Analysis 18(1): 164-171
Jang, J.; Lee, H. 2016: Microstructural densification and CO2 uptake promoted by the carbonation curing of belite-rich Portland cement. Cement and Concrete Research 82: 50-57
Tomota, Y.; Strum, M.; Morris, J.W. 1986: Microstructural dependence of Fe-high Mn tensile behavior. Metallurgical Transactions A 17(3): 537-547
Zhao, Y.; Tan, Y.; Ji, X.; Xiang, S. 2018: Microstructural dependence of anisotropic fracture mechanisms in cold-drawn pearlitic steels. Materials Science and Engineering: A735: 250-259
Li, Y.; Gong, J.; Xie, Y.; Tang, Z.; Zhang, Z. 2000: Microstructural dependence of electrical conductivity of (Zr O2)0.90–(Y2O3)0.04–(Ca O)0.06 solid electrolyte. Materials Science and Engineering: B78(2-3): 140-144
Matsui, T.; Muhida, R.; Kawamura, T.; Toyama, T.; Okamoto, H.; Yamazaki, T.; Honda, S.; Takakura, H.; Hamakawa, Y. 2002: Microstructural dependence of electron and hole transport in low-temperature-grown polycrystalline-silicon thin-film solar cells. Applied Physics Letters 81(25): 4751-4753
Emdadi, A.; Hossein Nedjad, S.; Badri Ghavifekr, H.; Kavanlouei, M.; Alijan Farzad Lahiji, F.; Ramezankhani, V. 2016: Microstructural dependence of magnetic and magnetostrictive properties in Fe–19 at% Ga. Rare Metals 39(4): 413-420
Pinto, R.; Kaur, D.; Rao, M.S.R.; Apte, P.R.; Srinivasu, V.V.; Vijayaraghavan, R. 1996: Microstructural dependence of penetration depth of Ag‐doped YBa2Cu3O7−δ thin films probed by atomic force microscopy. Applied Physics Letters 68(12): 1720-1722
Gangireddy, S.; Kaimiao, L.; Gwalani, B.; Mishra, R. 2018: Microstructural dependence of strain rate sensitivity in thermomechanically processed Al0.1Co Cr Fe Ni high entropy alloy. Materials Science and Engineering: A727: 148-159
Preiß, E.I.; Lyu, H.; Liebig, J.P.; Richter, G.; Gannott, F.; Gruber, P.A.; Göken, M.; Bitzek, E.; Merle, B. 2019: Microstructural dependence of the fracture toughness of metallic thin films: a bulge test and atomistic simulation study on single-crystalline and polycrystalline silver films. Journal of Materials Research 34(20): 3483-3494
Gentile, J.M.; Hofmann, D.C.; Trelewicz, J.R. 2020: Microstructural dependence of the incipient to homogeneous flow transition in metallic glass composites. Scripta Materialia 188: 32-36
Dias, A.; Moreira, R.L.; Mohallem, N.D.; Persiano, A.C. 1997: Microstructural dependence of the magnetic properties of sintered Ni Zn ferrites from hydrothermal powders. Journal of Magnetism and Magnetic Materials 172(1-2): L9-L14
Pyzalla, A.; Reimers, W. 1997: Microstructural dependence of thermal residual microstresses in PMMCs. Physica B: Condensed Matter 234-236: 974-976
Quan, Z.; Larimore, Z.; Wu, A.; Yu, J.; Qin, X.; Mirotznik, M.; Suhr, J.; Byun, J.; Oh, Y.; Chou, T. 2016: Microstructural design and additive manufacturing and characterization of 3D orthogonal short carbon fiber/acrylonitrile-butadiene-styrene preform and composite. Composites Science and Technology 126: 139-148
Palmero, P.; Naglieri, V.; Spina, G.; Lombardi, M. 2011: Microstructural design and elaboration of multiphase ultra-fine ceramics. Ceramics International 37(1): 139-144
Schwaighofer, E.; Clemens, H.; Mayer, S.; Lindemann, J.; Klose, J.; Smarsly, W.; Güther, V. 2014: Microstructural design and mechanical properties of a cast and heat-treated intermetallic multi-phase γ-Ti Al based alloy. Intermetallics 44: 128-140
Tang, J.; Bai, Y.; Zhang, J.; Liu, K.; Liu, X.; Zhang, P.; Wang, Y.; Zhang, L.; Liang, G.; Gao, Y.; Yang, J. 2016: Microstructural design and oxidation resistance of Co Ni Cr Al y alloy coatings in thermal barrier coating system. Journal of Alloys and Compounds 688: 729-741
Jaimeewong, P.; Liu, Z.; Wang, X.; Jiansirisomboon, S.; Ye, Z.; Watcharapasorn, A. 2017: Microstructural design and properties of PMNT crystal-embedded barium calcium zirconate titanate ceramics. Ceramics International 43: S193-S197
Fan, W.; Bai, Y.; Li, J.; Gao, Y.; Chen, H.; Kang, Y.; Shi, W.; Li, B. 2017: Microstructural design and properties of supersonic suspension plasma sprayed thermal barrier coatings. Journal of Alloys and Compounds 699: 763-774
Dillon, S.J.; Sun, K. 2012: Microstructural design considerations for Li-ion battery systems. Current Opinion in Solid State and Materials Science 16(4): 153-162
Ozcan, H.; Ma, J.; Karaman, I.; Chumlyakov, Y.; Santamarta, R.; Brown, J.; Noebe, R. 2018: Microstructural design considerations in Fe-Mn-Al-Ni shape memory alloy wires: Effects of natural aging. Scripta Materialia 142: 153-157
Meng, F.; Li, S.; Li, Y.F.; Jia, B.; Huang, X. 2017: Microstructural design for 2D photonic crystals with large polarization-independent band gaps. Materials Letters 207: 176-178
Nie, J.; Wang, Y. 2019: Microstructural design for advanced light metals. MRS Bulletin 44(4): 281-286
Borrell, A.; Álvarez, I.; Torrecillas, R.; Rocha, V.; Fernández, A. 2012: Microstructural design for mechanical and electrical properties of spark plasma sintered Al2O3–Si C nanocomposites. Materials Science and Engineering: A534: 693-698
Zhu, H.; Wei, T.; Carr, D.; Harrison, R.; Edwards, L.; Seo, D.; Maruyama, K.; Dargusch, M.S. 2014: Microstructural design for thermal creep and radiation damage resistance of titanium aluminide alloys for high-temperature nuclear structural applications. Current Opinion in Solid State and Materials Science 18(5): 269-278
de Diego-Calderón, I.; Sabirov, I.; Molina-Aldareguia, J.; Föjer, C.; Thiessen, R.; Petrov, R. 2016: Microstructural design in quenched and partitioned (Q&P) steels to improve their fracture properties. Materials Science and Engineering: A657: 136-146
Wang, J.; Jiang, S.; Jiang, D.; Tian, J.; Li, Y.; Wang, Y. 2012: Microstructural design of Ba Ti O3-based ceramics for temperature-stable multilayer ceramic capacitors. Ceramics International 38(7): 5853-5857
Maziasz, P.; Braski, D. 1984: Microstructural design of PCA austenitic stainless steel for improved resistance to helium embrittlement under HFIR irradiation. Journal of Nuclear Materials 122(1-3): 305-310
Ivanova, Y.A.; Lopes, D.; Durana, E.; Lisenkov, A.; Frade, J.; Kovalevsky, A. 2021: Microstructural design of cellular 3 YTZ-Al2O3 ceramic membranes. Ceramics International 47(1): 1040-1046
del Valle García, A.; Hautcoeur, D.; Leriche, A.; Cambier, F.; Baudín, C. 2020: Microstructural design of ceramics for bone regeneration. Journal of the European Ceramic Society 40(7): 2555-2565
Sakata, S.; Ashida, F.; Zako, M. 2007: Microstructural design of composite materials using fixed-grid modeling and noise-resistant smoothed Kriging-based approximate optimization. Structural and Multidisciplinary Optimization 36(3): 273-287
Zhou, S.; Li, Q. 2008: Microstructural design of connective base cells for functionally graded materials. Materials Letters 62(24): 4022-4024
Panzera, T.; Rubio, J.; Bowen, C.; Walker, P. 2008: Microstructural design of materials for aerostatic bearings. Cement and Concrete Composites 30(7): 649-660
Gorsse, S.; Ouvrard, B.; Gouné, M.; Poulon-Quintin, A. 2015: Microstructural design of new high conductivity – high strength Cu-based alloy. Journal of Alloys and Compounds 633: 42-47
Borrero-López, O.; Ortiz, A.L.; Guiberteau, F.; Padture, N.P. 2007: Microstructural design of sliding-wear-resistant liquid-phase-sintered Si C: An overview. Journal of the European Ceramic Society 27(11): 3351-3357
Ji, Z.; Yang, H. 2016: Microstructural design of two-phase titanium alloys by micro-scale strain distribution. Materials Letters 184: 157-161
Kim, S.; Kim, K.; Oh, S.; Kang, T.; Kuk, I. 1994: Microstructural designs and electrical properties of Y2O3-doped Zr O2s. Solid State Ionics 72: 279-284
Zhu, R.; Liu, X.; Hu, G.; Yuan, F.; Huang, G. 2015: Microstructural designs of plate-type elastic metamaterial and their potential applications: a review. International Journal of Smart and Nano Materials 6(1): 14-40
Jochum, A.; Neubauer, T.A.; Harzhauser, M. 2015: Microstructural details in shells of the gastropod genera Carychiella and Carychium of the Middle Miocene. Lethaia 49(1): 87-101
Novelli, M.; Edalati, K.; Itano, S.; Li, H.; Akiba, E.; Horita, Z.; Grosdidier, T. 2020: Microstructural details of hydrogen diffusion and storage in Ti–V–Cr alloys activated through surface and bulk severe plastic deformation. International Journal of Hydrogen Energy 45(8): 5326-5336
Nakahara, S.; McCoy, R. 1982: Microstructural determination of fast diffusing species in thin film diffusion couples. Thin Solid Films 88(3): 285-290
Rafieerad, A.; Bushroa, A.; Zalnezhad, E.; Sarraf, M.; Basirun, W.; Baradaran, S.; Nasiri-Tabrizi, B. 2015: Microstructural development and corrosion behavior of self-organized Ti O2 nanotubes coated on Ti–6Al–7Nb. Ceramics International 41(9): 10844-10855
Montedo, O.R.K.; Faller, C.A.; Bertan, F.M.; Jiusti, J.; Piva, R.H.; Piva, D.H. 2017: Microstructural development and electrical behavior during crystalization of iron-rich glass-ceramics obtained from mill scale. Ceramics International 43(15): 11864-11873
Aslan, M.; Jaeger, H.; Maric, M.; Schulze, K. 1991: Microstructural development and electrical properties of sintered and annealed Bi Sr Ca Cu2Ox. Materials Science and Engineering: B10(2): 133-138
Song, S.; Lu, B.; Gao, Z.; Bao, C.; Ma, Y. 2019: Microstructural development and factors affecting the performance of a reaction-bonded silicon carbide composite. Ceramics International 45(14): 17987-17995
Chen, S.; Liu, B.; Lin, L.; Jiao, G. 2015: Microstructural development and helium bubble formation in Cu/W(Re) nanometer multilayer films irradiated by He+ ion. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms 354: 244-248
Koroglu, L.; Cagirman, G.; Dagaslan, E.; Ayas, E. 2020: Microstructural development and in vitro bioactivity of luminescent Eu doped monticellite based ceramics as multifunctional bone graft substitutes. Materials Technology: 1-7
Shakouri, Z.; Nazockdast, H. 2018: Microstructural development and mechanical performance of PLA/TPU blends containing geometrically different cellulose nanocrystals. Cellulose 25(12): 7167-7188
De la Iglesia, P.; García-Moreno, O.; Menéndez, J.; De Aza, A.; Álvarez-Clemares, I.; Torrecillas, R. 2018: Microstructural development and mechanical performance of mullite-alumina and hibonite-alumina ceramics with controlled addition of a glass phase. Ceramics International 44(2): 2292-2299
Palma- Elvira, E.; Garnica-Gonzalez, P.; Pacheco-Cedeño, J.; Cruz Rivera, J.; Ramos-Azpeitia, M.; Garay-Reyes, C.; Hernández-Rivera, J. 2019: Microstructural development and mechanical properties during hot rolling and annealing of an automotive steel combining TRIP/TWIP effects. Journal of Alloys and Compounds 798: 45-52
Abul, M.R.; Cochrane, R.F.; Mullis, A.M. 2022: Microstructural development and mechanical properties of drop tube atomized Al-2.85 wt% Fe. Journal of Materials Science-Technology 104: 41-51
Spinelli, J.E.; Garcia, A. 2013: Microstructural development and mechanical properties of hypereutectic Sn–Cu solderalloys. Materials Science and Engineering: A568: 195-201
Arantes, V.L.; de Souza, D.P. 2005: Microstructural development and microwave properties of Zn O-doped tin titanate zirconate. Materials Science and Engineering: A398(1-2): 220-226
Krishnamurthy, M.; Yang, B.; Weber, W.H. 1996: Microstructural development and optical properties of epitaxial Ge1−x Cx alloys on Si(100). Applied Physics Letters 69(17): 2572-2574
Du, Y.; Shen, J.; Xiong, Y.; Shang, Z.; Qin, L.; Fu, H. 2018: Microstructural development and room temperature tensile property of directionally solidified Ti–47Al alloys by electromagnetic confinement and directional solidification. Journal of Materials Research 33(8): 958-966
Trociewitz, U.; Sahm, P.; Koritala, R.; Brandao, L.; Bacaltchuk, C.; Schwartz, J. 2001: Microstructural development and superconducting properties of Ba O/sub 2/-added Bi/sub 2/Sr/sub 2/Ca Cu/sub 2/O/sub 8+x/. IEEE Transactions on Appiled Superconductivity 11(1): 3054-3057
Nakata, K.; Ikeda, S.; Hamada, S.; Hishinuma, A. 1996: Microstructural development due to long-term aging and ion irradiation behavior in weld metals of austenitic stainless steel. Journal of Nuclear Materials 233-237: 192-196
Wu, J.; Sung, H. 1989: Microstructural development during cooling and its influence on the dielectric properties of barium- and niobium-doped Ti O2 ceramics. Materials Science and Engineering: B3(3): 265-272
Ortiz, A.L.; Rodrigues, C.S.; Guiberteau, F.; Zhang, Y. 2021: Microstructural development during crystallization firing of a dental-grade nanostructured lithia-zirconia glass-ceramic. Journal of the European Ceramic Society 41(11): 5728-5739
Joshi, T.C.; Prakash, U.; Dabhade, V.V. 2015: Microstructural development during hot forging of Al 7075 powder. Journal of Alloys and Compounds 639: 123-130
Elmer, J.W.; Allen, S.M.; Eagar, T.W. 1989: Microstructural development during solidification of stainless steel alloys. Metallurgical Transactions A 20(10): 2117-2131
Ghasali, E.; Shahedi Asl, M. 2018: Microstructural development during spark plasma sintering of Zr B2–Si C–Ti composite. Ceramics International 44(15): 18078-18083
Perez, E.; Keiser, D.; Sohn, Y. 2016: Microstructural development from interdiffusion and reaction between U Mo and AA6061 alloys annealed at 600° and 550 °C. Journal of Nuclear Materials 477: 178-192
Cruz, K.S.; Spinelli, J.E.; Ferreira, I.L.; Cheung, N.; Garcia, A. 2008: Microstructural development in Al–Sn alloys directionally solidified under transient heat flow conditions. Materials Chemistry and Physics 109(1): 87-98
Hong, S.; Kao, P.; Chang, C. 1992: Microstructural development in AlSi C composites made by resistance sintering of mechanically alloyed powders. Materials Science and Engineering: A158(2): 195-202
Lee, J.; Demczyk, B.; Mountfield, K.; Laughlin, D. 1987: Microstructural development in Co-Cr films for perpendicular recording media. IEEE Transactions on Magnetics 23(5): 2455-2457
Smith, T.R.; Sugar, J.D.; San Marchi, C.; Schoenung, J.M. 2020: Microstructural development in DED stainless steels: applying welding models to elucidate the impact of processing and alloy composition. Journal of Materials Science 56(1): 762-780
Hoydick, D.P.; Palmiere, E.J.; Soffa, W.A. 1997: Microstructural development in Mn Al-base permanent magnet materials: new perspectives. Journal of Applied Physics 81(8): 5624-5626
Gale, W.F.; Orel, S.V. 1996: Microstructural development in Ni Al/Ni-Si-B/Ni transient liquid phase bonds. Metallurgical and Materials Transactions A 27(7): 1925-1931
Allen, T.; Tan, L.; Gan, J.; Gupta, G.; Was, G.; Kenik, E.; Shutthanandan, S.; Thevuthasan, S. 2006: Microstructural development in advanced ferritic–martensitic steel HCM12A. Journal of Nuclear Materials 351(1-3): 174-186
Field, D.P.; Yanke, J.M.; Mcgowan, E.V.; Michaluk, C.A. 2005: Microstructural development in asymmetric processing of tantalum plate. Journal of Electronic Materials 34(12): 1521-1525
Jahanafrooz, A.; Hasan, F.; Lorimer, G.W.; Ridley, N. 1983: Microstructural development in complex nickel-aluminum bronzes. Metallurgical Transactions A 14(10): 1951-1956
Katoh, Y.; Hashimoto, N.; Kondo, S.; Snead, L.; Kohyama, A. 2006: Microstructural development in cubic silicon carbide during irradiation at elevated temperatures. Journal of Nuclear Materials 351(1-3): 228-240
Kang, S.K.; Benn, R.C. 1985: Microstructural development in high volume fraction gamma prime Ni-base oxide-dispersion-strengthened superalloys. Metallurgical Transactions A 16(7): 1285-1294
Eastman, J.A. 1994: Microstructural development in nanophase Ti O2during annealing. Journal of Applied Physics 75(2): 770-779
Plucknett, K.P.; Quinlan, M.; Garrido, L.; Genova, L. 2008: Microstructural development in porous β-Si3N4 ceramics prepared with low volume RE2O3–Mg O–(Ca O) additions (RE=La, Nd, Y, Yb). Materials Science and Engineering: A489(1-2): 337-350
Nagarajan, R.; Aoki, K.; Chattopadhyay, K. 1994: Microstructural development in rapidly solidified TiNi alloys. Materials Science and Engineering: A179-180: 198-204
Lefevre, M.J.; Speck, J.S.; Schwartz, R.W.; Dimos, D.; Lockwood, S.J. 1996: Microstructural development in sol-gel derived lead zirconate titanate thin films: the role of precursor stoichiometry and processing environment. Journal of Materials Research 11(8): 2076-2084
Hanrahan Jr, R.; Field, R.; Thoma, D.; Jacobson, L.; Banerjee, D. 2003: Microstructural development in the dual phase intermetallic alloy Ni50Al25Be25. Intermetallics 11(2): 95-100
Farlow, G.C.; Sklad, P.S.; White, C.W.; McHargue, C.J. 1990: Microstructural development in the near-surface region during thermal annealing of Al2O3 implanted with cationic impurities. Journal of Materials Research 5(7): 1502-1519
Chien, A.T.; Zhao, L.; Colic, M.; Speck, J.S.; Lange, F.F. 1998: Microstructural development of Ba Ti O3 heteroepitaxial thin films by hydrothermal synthesis. Journal of Materials Research 13(3): 649-659
Zhao, L.; Chien, A.T.; Lange, F.F.; Speck, J.S. 1996: Microstructural development of Ba Ti O3 powders synthesized by aqueous methods. Journal of Materials Research 11(6): 1325-1328
Tanaka, M.; Maziasz, P.; Hishinuma, A.; Hamada, S. 1986: Microstructural development of PCAs irradiated in HFIR at 300 to 400° C. Journal of Nuclear Materials 141-143: 943-947
Giannuzzi, L.A.; Lewinsohn, C.A.; Bakis, C.E.; Tressler, R.E. 1998: Microstructural development of SCS-6 Si C fibers during high temperature creep. Journal of Materials Research 13(7): 1853-1860
Iwamoto, Y.; Kikuta, K.; Hirano, S. 1998: Microstructural development of Si3N4–Si C–Y2O3 ceramics derived from polymeric precursors. Journal of Materials Research 13(2): 353-361
Vishista, K.; Gnanam, F. 2009: Microstructural development of Sr Al12O19 in alumina–strontia composites. Journal of the European Ceramic Society 29(1): 77-83
Agarwal, G.; Speyer, R.F.; Hackenberger, W.S. 1996: Microstructural development of Zn O using a rate-controlled sintering dilatometer. Journal of Materials Research 11(3): 671-679
Wu, H.; Yi, M.; Ge, Y.; Peng, K.; Ran, L. 2018: Microstructural development of a C/C-Zr C-Cu composite prepared by reactive melt infiltration with Zr/Cu powder mixture. Materials Characterization 138: 238-244
Zou, L.; Wali, N.; Yang, J.; Bansal, N.P. 2010: Microstructural development of a Cf/Zr C composite manufactured by reactive melt infiltration. Journal of the European Ceramic Society 30(6): 1527-1535
Tanaka, M.; Hamada, S.; Hishinuma, A.; Maziasz, P. 1988: Microstructural development of austenitic stainless steels irradiated in HFIR. Journal of Nuclear Materials 155-157: 801-805
Hsieh, C.; Wang, J.; Wu, P.T.; Wu, W. 2013: Microstructural development of brass alloys with various Bi and Pb additions. Metals and Materials International 19(6): 1173-1179
Kim, G.; Jeon, J.; Kim, M.; Suvorov, D.; Choi, S. 2013: Microstructural development of cobalt ferrite ceramics and its influence on magnetic properties. Metals and Materials International 19(6): 1209-1213
Cobb, S.D.; Szofran, F.R.; Jones, K.S.; Lehoczky, S.L. 1999: Microstructural development of directionally solidified Hg1−x Znx Se alloys. Journal of Electronic Materials 28(6): 732-739
Yu, P.; Yan, M.; Tomus, D.; Brice, C.; Bettles, C.; Muddle, B.; Qian, M. 2018: Microstructural development of electron beam processed Al-3Ti-1Sc alloy under different electron beam scanning speeds. Materials Characterization 143: 43-49
Shahbeigi Roodposhti, P.; Sarkar, A.; Murty, K.L. 2015: Microstructural development of high temperature deformed AZ31 magnesium alloys. Materials Science and Engineering: A626: 195-202
Santos, W.L.; Brito, C.; Bertelli, F.; Spinelli, J.E.; Garcia, A. 2015: Microstructural development of hypoeutectic Zn–(10–40)wt%Sn solder alloys and impacts of interphase spacing and macrosegregation pattern on hardness. Journal of Alloys and Compounds 647: 989-996