Home
  >  
Section 87

EurekaMag Full Text Articles Chapter 86,050



References:

Wei, F.; Chang, J. 2011: Numerical Noise Reduction with Novel Method of Gradient Calculation. Procedia Engineering 15: 3611-3615
Ren, Y.; Chang, S.; Liu, G.; Wang, H.; Bao, X. 2020: Numerical Noise Transfer Analysis of a Flexible Supported Gearbox Based on Impedance Model and Noise Transfer Function. Mathematical Problems in Engineering 2020: 1-15
Dewangan, H.C.; Sharma, N.; Panda, S.K. 2021: Numerical Nonlinear Static Analysis of Cutout-Borne Multilayered Structures and Experimental Validation. AIAA Journal: 1-13
Grattan-Guinness, I. 2013: Numerical Notation: a Comparative History. Annals of Science 70(2): 294-295
Ku, M.; Kähler, U. 2016: Numerical Null-Solutions to Iterated Dirac Operator on Bounded Domains. Complex Analysis and Operator Theory 11(2): 307-328
Bowick, M.; Falcioni, M.; Thorleifsson, G. 1997: Numerical Observation of a Tubular Phase in Anisotropic Membranes. Physical Review Letters 79(5): 885-888
Johnston, M.; Lim, S. 2012: Numerical Observation of the Jet Flight Patterns of Linear Shaped Charges. Applied Sciences 2(3): 629-640
Francis, R.; Young, T. 2003: Numerical Observations on Separatrix Crossings. International Journal of Bifurcation and Chaos 13(02): 511-520
Elsberry, R.L.; Garwood Jr., R.W. 1980: Numerical Ocean Prediction Models- Goal for the 1980s. Bulletin of the American Meteorological Society 61(12): 1556-1566
Winter, N.W.; McKoy, V. 1968: Numerical One‐Center Calculation of the ns–σ Rydberg Series of H2+. The Journal of Chemical Physics 49(10): 4728-4730
Ringer, L.J. 1969: Numerical Operators for Statistical PERT Critical Path Analysis. Management Science 16(2): B136-B143
Amacher, R.; Asprion, J.; Ochsner, G.; Tevaearai, H.; Wilhelm, M.; Plass, A.; Amstutz, A.; Vandenberghe, S.; Daners, M. 2013: Numerical Optimal Control of Turbo Dynamic Ventricular Assist Devices. Bioengineering 1(1): 22-46
Bacelli, G.; Ringwood, J.V. 2015: Numerical Optimal Control of Wave Energy Converters. IEEE Transactions on Sustainable Energy 6(2): 294-302
Gros, S.; Zanon, M. 2018: Numerical Optimal Control with Periodicity Constraints in the Presence of Invariants. IEEE Transactions on Automatic Control 63(9): 2818-2832
Aniţa, S.; Arnăutu, V.; Ştefănescu, R. 2009: Numerical Optimal Harvesting for a Periodic Age-Structured Population Dynamics with Logistic Term. Numerical Functional Analysis and Optimization 30(3-4): 183-198
Fischer, M.; Jiang, X. 2015: Numerical Optimisation for the Evaluation of Combustion Kinetic Models. Energy Procedia 66: 145-148
Gaillard, T.; Davidenko, D.; Dupoirieux, F. 2015: Numerical Optimisation in Non Reacting Conditions of the Injector Geometry for a Continuous Detonation Wave Rocket Engine. Acta Astronautica 111: 334-344
Hallak, K.; Baudoin, F.; Griseri, V.; Bugarin, F.; Segonds, S. 2020: Numerical Optimization Applying Trust Region Algorithm to Optimize Parameters Related to Charge Transport Model in LDPE. IEEE Transactions on Dielectrics and Electrical Insulation 27(6): 2048-2055
Sawada, K.; Shin, S. 2013: Numerical Optimization Design of Dynamic Quantizer via Matrix Uncertainty Approach. Mathematical Problems in Engineering 2013: 1-12
Zeng, Z.; Wang, L.J.; Li, X.B. 2011: Numerical Optimization Design on the Parameters of Double Ellipsoid Welding Heat Source. Advanced Materials Research 189-193: 2329-2334
Renczes, B.; Kollar, I.; Moschitta, A.; Carbone, P. 2016: Numerical Optimization Problems of Sine-Wave Fitting Algorithms in the Presence of Roundoff Errors. IEEE Transactions on Instrumentation and Measurement 65(8): 1785-1795
Du, Q.Q.; Hu, X.J.; Li, Q.F.; Liu, Y.K.; Yang, B. 2013: Numerical Optimization Research on Rear Characteristic Angles Based on MIRA Model for Aerodynamic Drag Reduction. Advanced Materials Research 774-776: 428-432
Xiao, H.P.; Du, X.; Wang, L. 2011: Numerical Optimization Research on the Dielectric Barrier Discharge for NOx Removal. Advanced Materials Research 356-360: 1238-1243
Zimmermann, F.; Calise, A.J. 1998: Numerical Optimization Study of Aeroassisted Orbital Transfer. Journal of Guidance, Control, and Dynamics 21(1): 127-133
Caiseda, C.; Griva, I.; Martinez, L.; Shaw, K.; Weingarten, D. 2014: Numerical Optimization Technique for Optimal Design of the n Grooves Surface Plasmon Grating Coupler. Procedia Computer Science 29: 2145-2151
Coleman, T. 1987: Numerical Optimization Techniques (Yurij G. Evtushenko). SIAM Review 29(2): 309-310
Liang, B.; Zhang, T. 2018: Numerical Optimization and Cyber-Physical- Social Computing for Vibrations of the Elliptical Treadmill Based on GSO-BPNN Model. IEEE Access 6: 10886-10895
Leifsson, L.; Koziel, S.; Andrason, F.; Magnusson, K.; Gylfason, A. 2012: Numerical Optimization and Experimental Validation of a Low Speed Wind Tunnel Contraction. Procedia Computer Science 9: 822-831
Wang, L.; Chen, G.; Wang, T.; Cao, J. 2017: Numerical Optimization and Noise Analysis of High-Tip-Speed Wind Turbine. Advances in Applied Mathematics and Mechanics 9(6): 1461-1484
Wen, S.; Fleming, E.; Shi, L.; da Silva, A.K. 2014: Numerical Optimization and Power Output Control of a Hot Thermal Battery with Phase Change Material. Numerical Heat Transfer, Part A: Applications 65(9): 825-843
Yang, Y.; Wang, Y.; Huang, B. 2014: Numerical Optimization for Nanofluid Flow in Microchannels Using Entropy Generation Minimization. Numerical Heat Transfer, Part A: Applications 67(5): 571-588
Kloppenborg, T.; Schikorra, M.; Schomäcker, M.; Tekkaya, A. 2008: Numerical Optimization of Bearing Length in Composite Extrusion Processes. Advances on Extrusion Technology and Simulation of Light Alloys: 47-54
Tai, T.C.; Kidwell Jr., G.H.; Vanderplaats, G.N. 1982: Numerical Optimization of Circulation Control Airfoils. Journal of Aircraft 19(2): 145-150
Laue, H.E.A.; du Plessis, W.P. 2018: Numerical Optimization of Compressive Array Feed Networks. IEEE Transactions on Antennas and Propagation 66(7): 3432-3440
Hansen, E.R. 1983: Numerical Optimization of Computer Models (Hans-Paul Schwefel). SIAM Review 25(3): 431-433
Zonouz, O.N.; Salmanpour, M. 2011: Numerical Optimization of Curved Vertical Walls in Natural Convection Flow Fields by the Entropy Generation Minimization Method. Heat Transfer Research 42(3): 285-299
Ovando-Chacon, G.E.; Ovando-Chacon, S.L.; Prince-Avelino, J.C.; Rodriguez-Leon, A.; Garcia-Arellano, C. 2017: Numerical Optimization of Double-Diffusive Mixed Convection in a Rectangular Enclosure with a Reactant Fluid. Heat Transfer Research 48(18): 1651-1668
Mengi, E.; Yildirim, E.A.; Kiliç, M. 2014: Numerical Optimization of Eigenvalues of Hermitian Matrix Functions. SIAM Journal on Matrix Analysis and Applications 35(2): 699-724
Straubhaar, R. 2014: Numerical Optimization of Eigenvalues of the Dirichlet–Laplace Operator on Domains in Surfaces. Computational Methods in Applied Mathematics 14(3): 393-409
Chien, N.B.; Linh, N.X.; Jong-Taek, O. 2019: Numerical Optimization of Flow Distribution inside Inlet Header of Heat Exchanger. Energy Procedia 158: 5488-5493
Patel, V.; Jain, S.; Motwani, K.; Patel, R. 2013: Numerical Optimization of Guide Vanes and Reducer in Pump Running in Turbine Mode. Procedia Engineering 51: 797-802
Antunes, P.R.S.; Freitas, P. 2012: Numerical Optimization of Low Eigenvalues of the Dirichlet and Neumann Laplacians. Journal of Optimization Theory and Applications 154(1): 235-257
Dong, J.N.; Su, X.; Chen, T.; Wang, M.; Li, X.X. 2013: Numerical Optimization of Oilfield Heating Furnace Research. Advanced Materials Research 805-806: 1874-1877
Smajic, J.; Hafner, C.; Xudong, C.; Vahldieck, R. 2007: Numerical Optimization of Photonic Crystal Structures. Journal of Computational and Theoretical Nanoscience 4(3): 675-685
Yi, H.; Liu, P.; Xiao, L. 2010: Numerical Optimization of Pitch Profile for Overall Efficiency Enhancement of a Space Twt. Progress In Electromagnetics Research C 16: 37-50
Stephan, A.; Schrall, J.; Holzäpfel, F. 2017: Numerical Optimization of Plate-Line Design for Enhanced Wake-Vortex Decay. Journal of Aircraft 54(3): 995-1010
Milanese, M.; Knauer, M.; Colangelo, G.; Laforgia, D.; de Risi, A. 2017: Numerical Optimization of SPR Sensors for Lube Oil Real-Time Optical Characterization in Large 2-Stroke Marine Diesel Engines. Energy Procedia 126: 1075-1082
Hirahara, A.; Hino, R.; Yoshida, F.; Toropov, V.V. 2008: Numerical Optimization of Sheet Metal Forming Process Using new Fracture Criterion. International Journal of Modern Physics B 22(31n 32): 5692-5698
Hejczyk, T.; Urbańczyk, M. 2013: Numerical Optimization of Structures SAW Gas Sensors. Acta Physica Polonica A 124(3): 432-435
Ponomarenko, A.; Tishchenko, A.; Sukharev, V.; Strikhanov, M. 2015: Numerical Optimization of THz Source Based on Interaction between Electrons Flow and Dielectric Media. Physics Procedia 72: 512-517
Oki, S.; Ito, K.O.; Natsui, S.; Suzuki, R.O. 2015: Numerical Optimization of Trapezoidal Thermoelectric Elements for Double-Pipe-Shaped Module. Journal of Electronic Materials 45(3): 1358-1364
Colinot, T.; Guillemain, P.; Doc, J.; Vergez, C.; Jousserand, M. 2019: Numerical Optimization of a Bicylindrical Resonator Impedance: Differences and Common Features Between a Saxophone Resonator and a Bicylindrical Resonator. Acta Acustica united with Acustica 105(6): 1217-1227
Berrian, D.; Fathi, M.; Kechouane, M. 2017: Numerical Optimization of a Bifacial Bi-Glass Thin-Film a-Si:H Solar Cell for Higher Conversion Efficiency. Journal of Electronic Materials 47(2): 1140-1150
Mackoy, T.; Harris, R.C.; Johnson, J.; Mascagni, M.; Fenley, M.O. 2013: Numerical Optimization of a Walk-on-Spheres Solver for the Linear Poisson-Boltzmann Equation. Communications in Computational Physics 13(1): 195-206
Ozdamar, G.; Pekbey, Y. 2018: Numerical Optimization of the Blade Surface Geometry in a Wave Turbine System. Acta Physica Polonica A 134(1): 150-152
Chu, K.; Horng, D.; Chang, K. 2019: Numerical Optimization of the Energy Consumption for Wireless Sensor Networks Based on an Improved Ant Colony Algorithm. IEEE Access 7: 105562-105571
Bouzidi, A.; Aguili, T. 2011: Numerical Optimization of the Method of Auxiliary Sources by Using Level Set Technique. Progress In Electromagnetics Research B 33: 203-219
Wang, J.; Peng, J.; Chen, J.N.; Li, J. 2014: Numerical Optimization of the Parison Thickness of Oil Drum in Extrusion Blow Molding. Advanced Materials Research 881-883: 1455-1459
He, A.; Onishi, J.; Shikazono, N. 2019: Numerical Optimization of the Solid Oxide Fuel Cell Electrode-Electrolyte Interface Structure with Adjoint Method. ECS Transactions 91(1): 2045-2054
Hung, T.; Huang, Y.; Sheu, T.; Yan, W. 2013: Numerical Optimization of the Thermal Performance of a Porous-Microchannel Heat Sink. Numerical Heat Transfer, Part A: Applications 65(5): 419-434
Kumar, A.; Saini, R.P.; Saini, J.S. 2016: Numerical Optimization of the Thermal Performance of a Solar Air Channel Having Discrete Multi V-Rib Roughness on the Absorber Plate. Heat Transfer Research 47(5): 449-469
Abramzon, B. 2006: Numerical Optimization of the Thermoelectric Cooling Devices. Journal of Electronic Packaging 129(3): 339-347
Shi, H.; Wang, Y.; Lin, J.; Li, J. 2017: Numerical Optimization of the Tube-Cored Induction Magnetometer Weight Under Specific Noise Constraints. IEEE Sensors Journal 17(11): 3302-3308
Qi, M.; Ma, C.; Yang, C. 2008: Numerical Optimization on a Centrifugal Turbocharger Compressor. SAE International Journal of Fuels and Lubricants 1(1): 1175-1180
Ravi, S.N. 2019: Numerical Optimization to AI, and Back. Proceedings of the AAAI Conference on Artificial Intelligence 33: 9894-9895
Lyons, I.M.; Ansari, D. 2015: Numerical Order Processing in Children: from Reversing the Distance-Effect to Predicting Arithmetic. Mind, Brain, and Education 9(4): 207-221
Wang, Q.; Wen, J. 2012: Numerical Oscillations Analysis for Nonlinear Delay Differential Equations in Physiological Control Systems. Journal of Applied Mathematics 2012: 1-17
Liu, L.; Yi, W.; Yang, Q.; Peng, H.; Wang, J. 2019: Numerical P systems with Boolean condition. Theoretical Computer Science 785: 140-149
Zhang, Z.; Wu, T.; Păun, A.; Pan, L. 2016: Numerical P systems with migrating variables. Theoretical Computer Science 641: 85-108
Pan, L.; Zhang, Z.; Wu, T.; Xu, J. 2017: Numerical P systems with production thresholds. Theoretical Computer Science 673: 30-41
Wagner, P.J. 2000: Numerical Palaeobiology--Computer-based Modelling and Analysis of Fossils and their Distributions. PALAIOS 15(4): 364-366
Kaesler, R. L. 2000: Numerical Palaeobiology: Computer-Based Modelling and Analysis of Fossils and their Distributions. Computers-Geosciences 26(2): 241-242
Kubota, K. 2013: Numerical Parallel Approach to Counting Hamiltonian Cycles with Proth Primes. Procedia Computer Science 18: 2553-2556
Othmer, C.; Glassmeier, K.; Motschmann, U.; Richter, I. 2003: Numerical Parameter Studies of Ion-Thruster-Beam Neutralization. Journal of Propulsion and Power 19(5): 953-963
Zama, F.; Ciavarelli, R.; Frascari, D.; Pinelli, D. 2013: Numerical Parameters Estimation in Models of Pollutant Transport with Chemical Reaction. IFIP Advances in Information and Communication Technology: 547-556
Karthikeyan, G.; Shimada, T. 2018: Numerical Parametric Analysis of Combustion Instability in Axial-Injected Hybrid Rocket Motors. Journal of Propulsion and Power 34(6): 1542-1552
Londhe, N.D.; Anand, R.S. 2012: Numerical Parametric Study of Superharmonic Field Properties in Nonlinear Ultrasound Wave Propagation in Human Soft Tissues. Acta Acustica united with Acustica 98(1): 179-187
Tschupp, S.A.; Temmel, S.E.; Salguero, N.P.; Herranz, J.; Schmidt, T.J. 2017: Numerical Partitioning Model for the Koutecký-Levich Analysis of Electrochemical Flow Cells with a Combined Channel/Wall-Jet Geometry. Journal of The Electrochemical Society 164(11): E3448-E3456
Klar, A.; Schmeiser, C. 2001: Numerical Passage from Radiative Heat Transfer to Nonlinear Diffusion Models. Mathematical Models and Methods in Applied Sciences 11(05): 749-767
Ruokosenmäki, I.; Rantala, T.T. 2015: Numerical Path Integral Approach to Quantum Dynamics and Stationary Quantum States. Communications in Computational Physics 18(1): 91-103
Rabadan Santana, E.J.; Weigand, B. 2020: Numerical Performance Analysis of a Supersonic Combustor at Mach 8 Flight Off-Design Conditions. Journal of Propulsion and Power 36(6): 820-835
Kacwin, C.; Oettershagen, J.; Ullrich, M.; Ullrich, T. 2020: Numerical Performance of Optimized Frolov Lattices in Tensor Product Reproducing Kernel Sobolev Spaces. Foundations of Computational Mathematics 21(3): 849-889
Kuznetsov, Y.A.; Govaerts, W.; Doedel, E.J.; Dhooge, A. 2005: Numerical Periodic Normalization for Codim 1 Bifurcations of Limit Cycles. SIAM Journal on Numerical Analysis 43(4): 1407-1435
Witte, V.D.; Rossa, F.D.; Govaerts, W.; Kuznetsov, Y.A. 2013: Numerical Periodic Normalization for Codim 2 Bifurcations of Limit Cycles: Computational Formulas, Numerical Implementation, and Examples. SIAM Journal on Applied Dynamical Systems 12(2): 722-788
Zhang, Y.C.; Wang, Z.B.; Jin, Y.H. 2012: Numerical Predication of Two-Phase Flow in Mixing Chamber of the Quick-Contact Cyclone Reactor. Advanced Materials Research 516-517: 945-948
Bohn, D.; Deutsch, G.; Kru¨ger, U. 1998: Numerical Predication of the Dynamic Behavior of Turbulent Diffusion Flames. Journal of Engineering for Gas Turbines and Power 120(4): 713-720
Satjaritanun, P.; Shimpalee, S.; Weidner, J.W.; Hirano, S.; Lu, Z.; Shum, A.; Zenyuk, I.V.; Ogawa, S.; Litster, S. 2017: Numerical Predicting of Liquid Water Transport inside Gas Diffusion Layer for PEMFC Using Lattice Boltzmann Method. ECS Transactions 80(8): 187-195
Yikici, T.A.; Chen, H.(. 2015: Numerical Prediction Model for Temperature Development in Mass Concrete Structures. Transportation Research Record: Journal of the Transportation Research Board 2508(1): 102-110
Schwane, R. 2015: Numerical Prediction and Experimental Validation of Unsteady Loads on ARIANE5 and VEGA. Journal of Spacecraft and Rockets 52(1): 54-62
Zhang, Y.; Shu, P.; Li, H.; Liu, C.; Zhang, F. 2021: Numerical Prediction and Experimental Validation of the Low-temperature Oxidation Characteristics of Coal in a Large-scale Furnace in an Adiabatic Environment. Combustion Science and Technology: 1-19
Huo, Y.; He, T.; Wang, B.; Zheng, Z.; Xue, Y. 2020: Numerical Prediction and Experimental Validation of the Microstructure of Bearing Steel Ball Formation in Warm Skew Rolling. Metallurgical and Materials Transactions A 51(3): 1254-1263
Baer, F.; Boudra, D. 1977: Numerical Prediction and Modification of Cyclone–Scale Precipitation. Monthly Weather Review 105(5): 603-617
Li, W.; Zhao, X.; Li, W.; Shi, W.; Ji, L.; Zhou, L. 2017: Numerical Prediction and Performance Experiment in an Engine Cooling Water Pump with Different Blade Outlet Widths. Mathematical Problems in Engineering 2017: 1-11
Zouaoui, M.; Labergere, C.; Gardan, J.; Makke, A.; Recho, N.; Alexandre, Q.; Lafon, P. 2019: Numerical Prediction of 3D Printed Specimens Based on a Strengthening Method of Fracture Toughness. Procedia CIRP 81: 40-44
Rašuo, B.; Jazarević, V. 2017: Numerical Prediction of Aerodynamic Noise Generated from an Aircraft in Low Mach Number Flight. PAMM 17(1): 685-686
Ye, J.; Xiong, Y.; Li, F.; Wang, Z. 2012: Numerical Prediction of Blade Frequency Noise of Cavitating Propeller. Journal of Hydrodynamics 24(3): 371-377
Lupker, H.; Cheli, F.; Braghin, F.; Gelosa, E.; Keckman, A. 2004: Numerical Prediction of Car Tire Wear. Tire Science and Technology 32(3): 164-186
Zhang, H.M.; Zhang, L.X. 2013: Numerical Prediction of Cavitation Erosion on a Francis Turbine Runner. Advanced Materials Research 655-657: 449-456
Majumdar, A.; Ravindran, S.S. 2011: Numerical Prediction of Conjugate Heat Transfer in Fluid Network. Journal of Propulsion and Power 27(3): 620-630
Ramesh, A.; Diwakar, S.; Das, S. 2011: Numerical Prediction of Contact Line Dynamics on Super-Hydrophobic Surfaces. International Journal of Micro-Nano Scale Transport 2(1): 99-108
Kim, M.; Kim, S.; Lee, S. 2020: Numerical Prediction of DC Breakdown Characteristics in LDPE with Current Profile as Critical Index. IEEE Access 8: 200051-200062
Vafaeenezhad, H.; Seyedein, S.H.; Aboutalebi, M.R.; Eivani, A.R. 2021: Numerical Prediction of Ductile Fracture in Sn-5Sb Alloy Hot Deformation Based on Phenomenological Models and Finite Element Analysis. Journal of Materials Engineering and Performance 30(8): 5524-5540
Xiao, Y.; Han, F.; Zhou, J.; Kubota, T. 2007: Numerical Prediction of Dynamic Performance of Pelton Turbine. Journal of Hydrodynamics 19(3): 356-364
Haorongbam, B.; Deb, A.; Chou, C. 2013: Numerical Prediction of Dynamic Progressive Buckling Behaviors of Single-Hat and Double-Hat Steel Components under Axial Loading. SAE International Journal of Transportation Safety 1(1): 114-126
Shen, H.L.; Su, Y.M.; Chen, Q.T. 2012: Numerical Prediction of Energy Saving Effect of Compensating Duct Based on CFD Technique. Advanced Materials Research 512-515: 1181-1184
Abu-Nada, E. 2005: Numerical Prediction of Entropy Generation in Separated Flows. Entropy 7(4): 234-252
Ode, M.; Sasajima, N.; Yamada, Y.; Bloembergen, P.; Onodera, H. 2011: Numerical Prediction of Eutectic Temperature Using a Multi-phase-Field Model. International Journal of Thermophysics 32(11-12): 2610-2622
Sharma, A.; Richards, S.K.; Wood, T.H.; Shieh, C. 2009: Numerical Prediction of Exhaust Fan-Tone Noise from High-Bypass Aircraft Engines. AIAA Journal 47(12): 2866-2879
Férand, M.; Livebardon, T.; Moreau, S.; Sanjosé, M. 2019: Numerical Prediction of Far-Field Combustion Noise from Aeronautical Engines. Acoustics 1(1): 174-198
Gao, Y.; Zong, Z.; Sun, L. 2011: Numerical Prediction of Fatigue Damage in Steel Catenary Riser Due to Vortex-Induced Vibration. Journal of Hydrodynamics 23(2): 154-163
Xie, G.; Liu, J.; Zhang, W.; Lorenzini, G.; Biserni, C. 2013: Numerical Prediction of Flow Structure and Heat Transfer in Square Channels with Dimples Combined with Secondary Half-Size Dimples/Protrusions. Numerical Heat Transfer, Part A: Applications 65(4): 327-356
Sathe, S.; Kelkar, K.M.; Karki, K.C.; Tai, C.; Lamb, C.; Patankar, S.V. 1997: Numerical Prediction of Flow and Heat Transfer in an Impingement Heat Sink. Journal of Electronic Packaging 119(1): 58-63
Tasif, T.H.; Rahman, M.H.; Fazle, A.B.; Karim, M.M. 2017: Numerical Prediction of Flow past a Marine Rudder. Procedia Engineering 194: 59-66
Kubiak, M.; Piekarska, W.; Saternus, Z.; Domański, T. 2016: Numerical Prediction of Fusion Zone and Heat Affected Zone in Hybrid Yb:YAG laser + GMAW Welding Process with Experimental Verification. Procedia Engineering 136: 88-94
Kelkar, K.M.; Patankar, S.V. 1989: Numerical Prediction of Heat Transfer and Fluid Flow in Rectangular Offset-Fin Arrays. Numerical Heat Transfer, Part A: Applications 15(2): 149-164
Kreider, J.F.; Kreith, F. 1975: Numerical Prediction of High Altitude Zero-Pressure Balloon Vertical Motion. Journal of Heat Transfer 97(1): 155-157
Chern, M.; Hsu, W.; Horng, T. 2012: Numerical Prediction of Hydrodynamic Loading on Circular Cylinder Array in Oscillatory Flow Using Direct-Forcing Immersed Boundary Method. Journal of Applied Mathematics 2012: 1-16
Shedbale, A.; Singh, I.; Mishra, B.; Singh, S. 2017: Numerical Prediction of Indentation Behavior of Metal Matrix Composites Using XFEM. Procedia Engineering 173: 1071-1078
Song, X.F.; Yin, L. 2008: Numerical Prediction of Influence of Diamond Burs on Subsurface Damage in Intraoral Adjustments of Porcelain Prostheses. Frontiers in Materials Science and Technology: 203-206
D'Ambrosio, D. 2003: Numerical Prediction of Laminar Shock/Shock Interactions in Hypersonic Flow. Journal of Spacecraft and Rockets 40(2): 153-161
Stanković, L.; Mosler, J. 2006: Numerical Prediction of Macroscopic Material Failure. PAMM 6(1): 197-198
Baker, A.J.; Manhardt, P.D. 1978: Numerical Prediction of Mean and Fluctuating Velocities for Jet-Flap Flows. AIAA Journal 16(8): 807-814
Cadiou, F.; Etiemble, A.; Douillard, T.; Willot, F.; Valentin, O.; Badot, J.; Lestriez, B.; Maire, E. 2019: Numerical Prediction of Multiscale Electronic Conductivity of Lithium-Ion Battery Positive Electrodes. Journal of The Electrochemical Society 166(8): A1692-A1703
Jahanshaloo, L.; Kermani, E.P.; Che Sidik, N.A. 2015: Numerical Prediction of Nanofluid Flow in Channel with Heated Cavity. Journal of Computational and Theoretical Nanoscience 12(9): 2442-2447
Ashraf, M.; Iqbal, I.; Masud, M.; Sultana, N. 2017: Numerical Prediction of Natural Convection Flow in the Presence of Weak Magnetic Prandtl Number and Strong Magnetic Field with Algebraic Decay in Mainstream Velocity. Advances in Applied Mathematics and Mechanics 9(2): 349-361
Kuznik, F.; Rusaouen, G. 2007: Numerical Prediction of Natural Convection Occurring in Building Components: a Double-Population Lattice Boltzmann Method. Numerical Heat Transfer, Part A: Applications 52(4): 315-335
Bhagwandin, V.A.; Sahu, J. 2014: Numerical Prediction of Pitch Damping Stability Derivatives for Finned Projectiles. Journal of Spacecraft and Rockets 51(5): 1603-1618
Lee, J.; Shin, S.; Chung, H. 2011: Numerical Prediction of Product Deformation and Identification of Major Controlling Factors during the IML Process Including Thermal Impact. Numerical Heat Transfer, Part A: Applications 60(6): 485-498
Wei, Y.; Wang, Y.; Chang, S.; Fu, J. 2012: Numerical Prediction of Propeller Excited Acoustic Response of Submarine Structure Based on CFD, FEM and BEM. Journal of Hydrodynamics 24(2): 207-216
Shi, F.X.; Yang, J.H.; Wang, X.H. 2013: Numerical Prediction of Radial Force in Hydraulic Turbine Based on Fluent. Advanced Materials Research 716: 717-720
Shilyashki, G.; Pfitzner, H.; Gerstbauer, E.; Trenner, G.; Hamberger, P.; Aigner, M. 2016: Numerical Prediction of Rhombic Rotational Magnetization Patterns in a Transformer Core Package. IEEE Transactions on Magnetics 52(1): 1-10
Lee, Y.; Yee, K. 2017: Numerical Prediction of Scientific Balloon Trajectories While Considering Various Uncertainties. Journal of Aircraft 54(2): 768-782
Zhang, H.M.; Zhang, L.X. 2013: Numerical Prediction of Sediment Erosion on Francis Turbine Blades. Advanced Materials Research 662: 643-647
Niu, Y.; Chu, W.; Yu, H.; Wang, Y. 2004: Numerical Prediction of Shear Stress Distributions for a Dissected Aorta. Biomedical Engineering: Applications, Basis and Communications 16(03): 143-150
Wang, F.; Chen, L. 2015: Numerical Prediction of Stability Derivatives for Complex Configurations. Procedia Engineering 99: 1561-1575
Zhu, J.; Balieu, R.; Lu, X.; Kringos, N. 2017: Numerical Prediction of Storage Stability of Polymer-Modified Bitumen: a Coupled Model of Gravity-Driven Flow and Diffusion. Transportation Research Record: Journal of the Transportation Research Board 2632(1): 70-78
Pan, Y.; Zhang, H.; Zhou, Q. 2012: Numerical Prediction of Submarine Hydrodynamic Coefficients using CFD Simulation. Journal of Hydrodynamics 24(6): 840-847
Iwai, H.; Ohmori, H.; Itakura, K.; Saito, M.; Yoshida, H. 2013: Numerical Prediction of System Efficiency of Solid Oxide Redox Flow Battery During Charge/Discharge Process. ECS Transactions 57(1): 2661-2670
Fu, W.; Metaxas, A. 1994: Numerical Prediction of Three-Dimensional Power Density Distributions in a Multi-Mode Cavity. Journal of Microwave Power and Electromagnetic Energy 29(2): 67-75
Miller, B.I.; Chase, P.P.; Jarvinen, B.R. 1972: Numerical Prediction of Tropical Weather Systems. Monthly Weather Review 100(12): 825-835
Jiang, G. 2012: Numerical Prediction of Turbulent Flow over 3D Sinusoidal Hill Using Non-orthogonal Hexahedron Grid and AMG Method. Procedia Engineering 31: 57-61
Cai, W. 2012: Numerical Prediction of Two-Phase Reacting Flow Field and Performance in an Aeroengine Combustor. Journal of Aerospace Engineering 25(2): 151-160
Kato, K.; Yamane, T. 1979: Numerical Prediction of Typical Articulated Rotor Impedance. Journal of Aircraft 16(7): 417-418
Mondal, R.N.; Islam, M.S. 2013: Numerical Prediction of Unsteady Heat and Fluid Flow through a Curved Rectangular Duct of Large Aspect Ratio. Procedia Engineering 56: 489-496
Kang, D.; Lakshminarayana, B. 1998: Numerical Prediction of Unsteady Transitional Boundary Layer Caused by Rotor-Stator Interaction. Journal of Propulsion and Power 14(6): 916-924
Patil, S.; Lankarani, H. 2018: Numerical Prediction of Various Failure Modes in Spotweld Steel Material. SAE International Journal of Transportation Safety 6(1): 29-38
Suryavamshi, N.; Lakshminarayana, B. 1992: Numerical Prediction of Wakes in Cascades and Compressor Rotors Including the Effects of Mixing: Part II- Rotor Passage Flow and Wakes Including the Effects of Spanwise Mixing. Journal of Turbomachinery 114(3): 617-626
Suryavamshi, N.; Lakshminarayana, B. 1992: Numerical Prediction of Wakes in Cascades and Compressor Rotors Including the Effects of Mixing: Part I- Cascade Wakes Including the Effects of Incidence and Free-Stream Turbulence. Journal of Turbomachinery 114(3): 607-616
Tarafder, M.S.; Ali, M.T.; Nizam, M.S. 2013: Numerical Prediction of Wave-making Resistance of Pentamaran in Unbounded Water using a Surface Panel Method. Procedia Engineering 56: 287-296
Jiang, G.B. 2013: Numerical Prediction of Wind Flow over Sinusoidal Hills Using Multigrid Method. Advanced Materials Research 639-640: 510-514
Pennanen, M.; Levin, R.L.; Larsson, L.; Finnsgård, C. 2016: Numerical Prediction of the Best Heel and Trim of a Laser Dinghy. Procedia Engineering 147: 336-341
Lopes, A.M.G.; Duarte, N.G.L.; Sánchez, O.H.; Daus, R.; Koch, H. 2021: Numerical Prediction of the Boundary-Layer Flow over the Bolund Hill: Assessment of Turbulence Models and Advection Schemes. Boundary-Layer Meteorology 180(1): 27-52
Mori, C.; Sato, T.; Kano, Y.; Aleynik, D. 2013: Numerical Prediction of the Diffusion of CO2 Seeping from Seabed in Ardmuchnish Bay. Energy Procedia 37: 3503-3506
van Heiningen, A.R.P.; Mujumdar, A.S.; Douglas, W.J.M. 1976: Numerical Prediction of the Flow Field and Impingement Heat Transfer Caused by a Laminar Slot Jet. Journal of Heat Transfer 98(4): 654-658
Ramzi, B.H.; Sebastien, T.; Fabrice, R.; Gemala, H.; Pierrick, M. 2017: Numerical Prediction of the Forming Limit Diagrams of Thin Sheet Metal using SPIF Tests. Procedia Engineering 183: 113-118
Lu, F.X.; Huang, T.B.; Tang, W.Z.; Song, J.H.; Tong, Y.M. 2002: Numerical Prediction of the Influence of Process Parameters on Large Area Diamond Deposition by Dc Arcjet with Arc Roots Rotating and Operating at Gas Recycling Mode. International Journal of Modern Physics B 16(06n 07): 887-894
Chen, G.; Dizier, A.; Li, X.; Verstricht, J.; Sillen, X.; Levasseur, S. 2021: Numerical Prediction of the Large-Scale in Situ PRACLAY Heater Test in the Boom Clay. Rock Mechanics and Rock Engineering 54(5): 2197-2218
Rajaei, A.; Hallstedt, B.; Broeckmann, C.; Barth, S.; Trauth, D.; Bergs, T. 2018: Numerical Prediction of the Microstructure and Stress Evolution During Surface Grinding of AISi 52100 (DIN 100Cr6). Integrating Materials and Manufacturing Innovation 7(4): 202-213
Li, H.; Pan, G.; Huang, Q.; Shi, Y. 2019: Numerical Prediction of the Pumpjet Propulsor Tip Clearance Vortex Cavitation in Uniform Flow. Journal of Shanghai Jiaotong University (Science) 25(3): 352-364
Bini, R.; Monno, M. 2007: Numerical Prediction of the Shape of the Molten Pool in a Stationary TIG Welding Process. Sheet Metal 2007: 699-706
Mohsenizadeh, S.; Ahmad, Z.; Alias, A. 2020: Numerical Prediction on the Crashworthiness of Circular and Square Thin-Walled Tubes with Polymeric Auxetic Foam Core. Journal of Materials Engineering and Performance 29(5): 3092-3106
Thompson, P.D. 1957: Numerical Prediction: An Exposition and Review for the Nonspecialist1. Bulletin of the American Meteorological Society 38(8): 447-452
Guo, B.; Wang, D.Z.; Zhou, J.W. 2013: Numerical Predictions and Experimental Verifications for Hydrodynamic Performance of Tidal Stream Turbine. Advanced Materials Research 694-697: 630-634
Fan, R.J.; Gao, H.C.; Chaplin, J.R. 2013: Numerical Predictions and Experimental Verifications for the Hydrodynamic Performance of Horizontal Axis Marine Current Turbine. Advanced Materials Research 694-697: 635-638
Chaouat, B. 2002: Numerical Predictions of Channel Flows with Fluid Injection Using Reynolds-Stress Model. Journal of Propulsion and Power 18(2): 295-303
Tseng, H.; Chang, R.Y.; Hsu, C. 2018: Numerical Predictions of Fiber Orientation for Injection Molded Rectangle Plate and Tensile Bar with Experimental Validations. International Polymer Processing 33(1): 96-105
Wee, H.; Zhang, Q.; Ligrani, P.M.; Narasimhan, S. 2008: Numerical Predictions of Heat Transfer and Flow Characteristics of Heat Sinks with Ribbed and Dimpled Surfaces in Laminar Flow. Numerical Heat Transfer, Part A: Applications 53(11): 1156-1175
Park, J.; Ligrani, P.M. 2005: Numerical Predictions of Heat Transfer and Fluid Flow Characteristics for Seven Different Dimpled Surfaces in a Channel. Numerical Heat Transfer, Part A: Applications 47(3): 209-232
Schnurr, N.M. 1977: Numerical Predictions of Heat Transfer to Supercritical Helium in Turbulent Flow Through Circular Tubes. Journal of Heat Transfer 99(4): 580-585
Amaratunga, S.R.; Tutty, O.R.; Roberts, G.T. 1998: Numerical Predictions of Hypersonic Flow over a Two-Dimensional Compression Ramp. Journal of Spacecraft and Rockets 35(2): 230-232
Nirmalkar, N.; Chhabra, R.P.; Poole, R.J. 2013: Numerical Predictions of Momentum and Heat Transfer Characteristics from a Heated Sphere in Yield-Stress Fluids. Industrial-Engineering Chemistry Research 52(20): 6848-6861
Malico, I.; Pereira, J.C.F. 1999: Numerical Predictions of Porous Burners with Integrated Heat Exchanger for Household Applications. Journal of Porous Media 2(2): 153-162
Du, L.; Liu, Y.; Li, T. 2015: Numerical Predictions of Scarfing on Performance of S-Shaped Nozzle with Asymmetric Lobe. Journal of Propulsion and Power 31(2): 604-618
Lin, Y.; Beale, S.B. 2005: Numerical Predictions of Transport Phenomena in a Proton Exchange Membrane Fuel Cell. Journal of Fuel Cell Science and Technology 2(4): 213-218
Polacsek, C.; Clair, V.; Le Garrec, T.; Reboul, G.; Jacob, M.C. 2015: Numerical Predictions of Turbulence/Cascade-Interaction Noise Using Computational Aeroacoustics with a Stochastic Model. AIAA Journal 53(12): 3551-3566
Xie, G.; Chen, Z.; Sunden, B.; Zhang, W. 2013: Numerical Predictions of the Flow and Thermal Performance of Water-Cooled Single-Layer and Double-Layer Wavy Microchannel Heat Sinks. Numerical Heat Transfer, Part A: Applications 63(3): 201-225
Caramana, E.; Whalen, P. 1998: Numerical Preservation of Symmetry Properties of Continuum Problems. Journal of Computational Physics 141(2): 174-198
Frittelli, M.; Madzvamuse, A.; Sgura, I.; Venkataraman, C. 2018: Numerical Preservation of Velocity Induced Invariant Regions for Reaction–Diffusion Systems on Evolving Surfaces. Journal of Scientific Computing 77(2): 971-1000
Dyja, R.; Gawronska, E.; Grosser, A. 2017: Numerical Problems Related to Solving the Navier-Stokes Equations in Connection with the Heat Transfer with the use of FEM. Procedia Engineering 177: 78-85
Beattie, J.R. 1975: Numerical Procedure for Analyzing Langmuir Probe Data. AIAA Journal 13(7): 950-952
Mitroi, M.R.; Fara, L.; Ciurea, M.L. 2014: Numerical Procedure for Optimizing Dye-Sensitized Solar Cells. Journal of Nanomaterials 2014: 1-6
Grossman, B. 1979: Numerical Procedure for the Computation of Irrotational Conical Flows. AIAA Journal 17(8): 828-837
Tizzi, S. 2000: Numerical Procedure for the Dynamic Analysis of Truss Space Structures. Journal of Spacecraft and Rockets 37(5): 614-621
Jiménez, C.; Carbonel, C.; Rojas, J. 2017: Numerical Procedure to Forecast the Tsunami Parameters from a Database of Pre-Simulated Seismic Unit Sources. Pure and Applied Geophysics 175(4): 1473-1483
Silverman, M.P. 2014: Numerical Procedures for Calculating the Probabilities of Recurrent Runs. Open Journal of Statistics 04(02): 144-153
Ben Said, M.; Azrar, L.; Sarsri, D. 2018: Numerical Procedures for Random Differential Equations. Journal of Applied Mathematics 2018: 1-23
Eichfelder, G. 2013: Numerical Procedures in Multiobjective Optimization with Variable Ordering Structures. Journal of Optimization Theory and Applications 162(2): 489-514
Lacroix, C.; Mathieu, L.; Thiébaut, F.; Douilly, M.; Falgarone, H. 2015: Numerical Process Based on Measuring Data for Gap Prediction of an Assembly. Procedia CIRP 27: 97-102
Kim, J.Y.; Kim, H.; Yoon, J.H.; Cho, S. 2017: Numerical Processing and Calculation Deficits in Alzheimer's Disease. Communication Sciences-Disorders 22(1): 138-145
Wang, A. 2021: Numerical Processing in the Stroop Task of Working Memory. OALib 08(04): 1-9
Gutiérrez, J. 2015: Numerical Properties of Different Root-Finding Algorithms Obtained for Approximating Continuous Newton's Method. Algorithms 8(4): 1210-1218
Ragusa, A.; Zappalà, G. 2009: Numerical Properties of Fat Schemes with Special Support. Communications in Algebra 37(3): 869-884
Bosarge, W.E.; Smith, C.L. 1972: Numerical Properties of a Multivariate Ritz-Trefftz Method. IBM Journal of Research and Development 16(4): 393-400
Condren, E.I. 1999: Numerical Proportion as Aesthetic Strategy in the Pearl Manuscript. Viator 30: 285-306
Stroud, A.H. 1982: Numerical Quadrature and Cubature (H. Engels). SIAM Review 24(2): 233-234
Gautschi, W. 1967: Numerical Quadrature in the Presence of a Singularity. SIAM Journal on Numerical Analysis 4(3): 357-362
Krenk, S. 1978: Numerical Quadrature of Periodic Singular Integral Equations. IMA Journal of Applied Mathematics 21(2): 181-187
Reeger, J.A.; Fornberg, B. 2015: Numerical Quadrature over the Surface of a Sphere. Studies in Applied Mathematics 137(2): 174-188
Carley, M. 2007: Numerical Quadratures for Singular and Hypersingular Integrals in Boundary Element Methods. SIAM Journal on Scientific Computing 29(3): 1207-1216
Djokich D., D. 1997: Numerical Quantification of Tissue and Organ Vascularisation Based on Power Angio Imaging Data -- Cheap and Simple. European Journal of Ultrasound 6: S8-S9
Jaegermann, M.; Lipski, W. 1983: Numerical Queries in Incomplete Information Data Bases. Fundamenta Informaticae 6(3-4): 375-391
Heinzel, P.; Kašparová, J.; Varady, M.; Karlický, M.; Moravec, Z. 2015: Numerical RHD simulations of flaring chromosphere with Flarix. Proceedings of the International Astronomical Union 11(S 320): 233-238
Gau, H.; Wang, K.; Wu, P.Y. 2013: Numerical Radii for Tensor Products of Operators. Integral Equations and Operator Theory 78(3): 375-382
Hirzallah, O.; Kittaneh, F.; Shebrawi, K. 2011: Numerical Radius Inequalities for Certain 2 × 2 Operator Matrices. Integral Equations and Operator Theory 71(1): 129-147
Itoh, T.; Nagisa, M. 2006: Numerical Radius Norms on Operator Spaces. Journal of the London Mathematical Society 74(01): 154-166
Mehrazin, M.; Amyari, M.; Zamani, A. 2019: Numerical Radius Parallelism of Hilbert Space Operators. Bulletin of the Iranian Mathematical Society 46(3): 821-829
Chien, M.; Nakazato, H. 2010: Numerical Range for Orbits Under a Central Force. Mathematical Physics, Analysis and Geometry 13(4): 315-330
Hou, J.; Li, C.; Qi, X. 2015: Numerical Range of Lie Product of Operators. Integral Equations and Operator Theory 83(4): 497-516
Li, C.; Rodman, L. 1994: Numerical Range of Matrix Polynomials. SIAM Journal on Matrix Analysis and Applications 15(4): 1256-1265
Benhida, C.; Gorkin, P.; Timotin, D. 2010: Numerical Ranges of C 0(N) Contractions. Integral Equations and Operator Theory 70(2): 265-279
Wang, K.Z.; Wu, P.Y. 2009: Numerical Ranges of Radial Toeplitz Operators on Bergman Space. Integral Equations and Operator Theory 65(4): 581-591
Stewart, M. 2018: Numerical Rank Deficiency in Matrix Products. SIAM Journal on Matrix Analysis and Applications 39(1): 365-399
Koperski, M.; Kazimierczuk, T.; Goryca, M.; Wojnar, P.; Golnik, A.; Kossacki, P.; Gaj, J. 2009: Numerical Rate Equation Approach to Picosecond Charge State Dynamics in Cd Te/Zn Te Quantum Dots. Acta Physica Polonica A 116(5): 893-895
Passaro, A.; Vicini, A.; Nania, F.; Biagioni, L. 2010: Numerical Rebuilding of SMART-1 Hall Effect Thruster Plasma Plume. Journal of Propulsion and Power 26(1): 149-158
Seiler, M.C.; Seiler, F.A. 1989: Numerical Recipes in C: the Art of Scientific Computing. Risk Analysis 9(3): 415-416
Glynn, J. 1989: Numerical Recipes: the Art of Scientific Computing. Computers-Geosciences 15(7): 1199-1200
Shcheglov, A.Y.; Viktorova, I.V. 2004: Numerical Reconstitution of a Nonlinear Source in a Hyperbolic Equation. Numerical Functional Analysis and Optimization 25(1-2): 137-150
Matesanz, A.; Velazquez, A.; Tizon, J.; Montanes, J. 2002: Numerical Reconstruction of Ejector Rocket Experimental Tests. Journal of Propulsion and Power 18(6): 1191-1198
Bao, G.; Lin, J.; Mefire, S.M. 2014: Numerical Reconstruction of Electromagnetic Inclusions in Three Dimensions. SIAM Journal on Imaging Sciences 7(1): 558-577
Xie, J.; Zou, J. 2005: Numerical Reconstruction of Heat Fluxes. SIAM Journal on Numerical Analysis 43(4): 1504-1535
Wang, Q.; Onishi, K. 2001: Numerical Reconstruction of Internal States by Boundary Measurements for the Laplace Equation. Numerical Functional Analysis and Optimization 22(3-4): 441-453
Salmon, F.; Ferrier, C.; Lacanette, D.; Mindeguia, J.; Leblanc, J.; Fritz, C.; Sirieix, C. 2020: Numerical Reconstruction of Paleolithic Fires in the Chauvet-Pont d'Arc Cave (Ardèche, France). Journal of Archaeological Method and Theory 28(2): 604-616
Yassine, F.; Essid, C.; Ahmed, K.; Ammar, K.B.; Abdelaziz, S. 2008: Numerical Reconstruction of Permeability Material Using 3-D T-Ω Formulation of Finite Element Method. PIERS Online 4(6): 661-665
Fujiwara, H.; Sadiq, K.; Tamasan, A. 2020: Numerical Reconstruction of Radiative Sources in an Absorbing and Nondiffusing Scattering Medium in two Dimensions. SIAM Journal on Imaging Sciences 13(1): 535-555
Coules, H.E.; Smith, D.J.; Serasli, K.H. 2014: Numerical Reconstruction of Residual Stress Fields from Limited Measurements. Advanced Materials Research 996: 243-248
Pickmann, H.; Egaña, J.C.; Soto, R.L. 2015: Numerical Reconstruction of Spring-Mass System from two Nondisjoint Spectra. Mathematical Problems in Engineering 2015: 1-7
Zhao, Z.; Liang, D. 2016: Numerical Reconstruction of a Deflagration Accident in a Factory Plant. Procedia Engineering 135: 607-612
Fu, J.; Shen, R.; Shu, Z.; Zhou, X.; Yuan, W. 2013: Numerical Reconstruction of the Catalyst Bed Temperature Distribution in a Multitubular Fixed-Bed Reactor by Karhunen–Loève Expansion. Industrial-Engineering Chemistry Research 52(23): 7818-7826
Palombi, F.; Toti, S.; Filippini, R. 2017: Numerical Reconstruction of the Covariance Matrix of a Spherically Truncated Multinormal Distribution. Journal of Probability and Statistics 2017: 1-24
Cappelletti, A.; Martelli, F.; Bianchi, E.; Trifoni, E. 2014: Numerical Redesign of 100kw MGT Combustor for 100% H2 fueling. Energy Procedia 45: 1412-1421
Oak-Key, M.; Yong-Woo, K. 1996: Numerical Reduced Minimization Theory for Beam Elements Under Non-Uniform Isoparametric Mapping. International Journal for Numerical Methods in Engineering 39(8): 1357-1382
Grech, D.K. 1988: Numerical Reexamination of Su(5)-Like Models. Modern Physics Letters A 03(08): 795-802
Grech, D.K. 1989: Numerical Reexamination of Supersymmetric and Nonsupersymmetric Su(5)-Like Grand Unified Models. International Journal of Modern Physics A 04(10): 2531-2559
Subaşi, M.; Araz, S.I. 2019: Numerical Regularization of Optimal Control for the Coefficient Function in a Wave Equation. Iranian Journal of Science and Technology, Transactions A: Science 43(5): 2325-2333
Cai, Z.; Li, R.; Wang, Y. 2012: Numerical Regularized Moment Method for High Mach Number Flow. Communications in Computational Physics 11(5): 1415-1438
Cai, Z.; Li, R. 2010: Numerical Regularized Moment Method of Arbitrary Order for Boltzmann-BGK Equation. SIAM Journal on Scientific Computing 32(5): 2875-2907
Lehner, L.; Pretorius, F. 2014: Numerical Relativity and Astrophysics. Annual Review of Astronomy and Astrophysics 52(1): 661-694
Brügmann, B. 2000: Numerical Relativity in 3+1 Dimensions. Annalen der Physik 9(3-5): 227-246
Bona, C.; MassÓ, J. 1993: Numerical Relativity: Evolving Spacetime. International Journal of Modern Physics C 04(04): 883-907
Myridis, N.E. 2011: Numerical Relativity: Solving Einstein's Equations on the Computer, by Th.W. Baumgarte and S.L. Shapiro. Contemporary Physics 52(6): 598-599
Braga, G.A.; Furtado, F.; Isaia, V.; Lee, L. 2020: Numerical Renormalization Group Algorithms for Self-Similar Asymptotics of Partial Differential Equations. Multiscale Modeling-Simulation 18(1): 131-162
Alvarez, J.V.; Moukouri, S. 2005: Numerical Renormalization Group Method in Weakly Coupled Quantum Spin Chains: Comparison with Exact Diagonalization. International Journal of Modern Physics C 16(06): 843-855
Seigneur, N.; L'Hopital, E.; Dauzeres, A.; Voutilainen, M.; Detilleux, V.; Labeau, P.; Dubus, A. 2017: Numerical Representative Elementary Volume Generation of a Simplified Cement Paste and Estimation of its Diffusivity and Comparison with Dedicated Experiments. Journal of Porous Media 20(1): 29-46
Stupishin, L.U.; Nikitin, K.E. 2014: Numerical Research Methodology of Free Oscillations of Geometrically Nonlinear Shell Using the Mixed Finite Element Method. Advanced Materials Research 988: 338-341
Wang, S.L.; Rong, R.; Hao, X.F. 2013: Numerical Research about Drag-Reduction Characteristic of Riblet Structure on Aerofoil Blade of Centrifugal Fan. Advanced Materials Research 655-657: 105-108
Dong, J.; Wang, X.; Tu, J. 2012: Numerical Research about the Internal Flow of Steam-jet Vacuum Pump: Evaluation of Turbulence Models and Determination of the Shock-mixing Layer. Physics Procedia 32: 614-622
Zhang, Z.; Sun, J.; Zhang, Z.; Jia, X.; Liu, Y. 2021: Numerical Research and Parametric Study on the Thermal Performance of a Vertical Earth-to-Air Heat Exchanger System. Mathematical Problems in Engineering 2021: 1-16
Wu, Z.R.; Chen, Q.; Liu, M. 2011: Numerical Research for the Film Surface Wave with the Different Flow Case. Advanced Materials Research 189-193: 1062-1065
Li, J. 2014: Numerical Research in Effects of Baffles on Heat Transfer Characteristics of a Tunnel Kiln's Flue Gas Heat Exchanger. Advanced Materials Research 953-954: 911-914
Askarova, A.; Bolegenova, S.; Maksimov, V.Y.; Bekmuhamet, A.; Ospanova, S.S. 2012: Numerical Research of Aerodynamic Characteristics of Combustion Chamber BKZ-75 Mining Thermal Power Station. Procedia Engineering 42: 1250-1259
An, X.; Song, B.; Tian, W.; Ma, C. 2019: Numerical Research of Flow past a Circular Cylinder with Splitter Plate at a Subcritical Reynolds Number Region. Journal of Shanghai Jiaotong University (Science) 24(1): 113-121
Guoskov, O.V.; Kopchenov, V.I.; Lomkov, K.E.; Vinogradov, V.A.; Waltrup, P.J. 2001: Numerical Research of Gaseous Fuel Preinjection in Hypersonic Three-Dimensional Inlet. Journal of Propulsion and Power 17(6): 1162-1169
Zhang, L.; Liu, M.; Dong, Q.; Zhao, S. 2011: Numerical Research of Heat Transfer of Supercritical COR2R in Channels. Energy and Power Engineering 03(02): 167-173
Zhdanova, A.O.; Kuznetsov, G.V.; Strizhak, P.A. 2014: Numerical Research of Heat and Mass Transfer Processes in Water Vapors and Gaseous Thermal Decomposition Products Mixture above the Combustible Wood on the Conditions of Chemical Reaction Termination in it. Advanced Materials Research 1040: 535-540
Sverdlik, M.; Pesin, A.; Pustovoytov, D.; Perekhozhikh, A. 2013: Numerical Research of Shear Strain in an Extreme Case of Asymmetric Rolling. Advanced Materials Research 742: 476-481
Zhapbasbayev, U.; Ramazanova, G.; Sattinova, Z. 2014: Numerical Research of the Beryllia Ceramics Formation Process. Advanced Materials Research 936: 187-194
Sun, P.F.; Yang, T.H.; Yu, Q.L.; Shen, W. 2012: Numerical Research on Anisotropy Mechanical Parameters of Fractured Rock Mass. Advanced Materials Research 524-527: 310-316
Yuan, F.; Lin, J.; Yu, J. 2018: Numerical Research on Convective Heat Transfer and Resistance Characteristics of Turbulent Duct Flow Containing Nanorod-Based Nanofluids. Journal of Nanotechnology 2018: 1-9
Lu, Z.; Zeng, Q.; Meng, Z.; Wang, Z.; Gao, G. 2020: Numerical Research on Cutting Force and Fracture Morphology of Rock Plate with two Sides Fixed and two Sides Free. Mathematical Problems in Engineering 2020: 1-14
Yin, Y.; Tan, Y.; Lu, Y.; Zhang, Y. 2018: Numerical Research on Energy Evolution and Burst Behavior of Unloading Coal–Rock Composite Structures. Geotechnical and Geological Engineering 37(1): 295-303
Mo, Z.; Xiao, J.; Wang, G. 2016: Numerical Research on Flow Characteristics around a Hydraulic Turbine Runner at Small Opening of Cylindrical Valve. Mathematical Problems in Engineering 2016: 1-8
Hu, T.; Xie, X.; Jiang, Y. 2017: Numerical Research on Flow Characteristics in a Plate-type Falling Film Heat Exchanger for a Li Br/H2O Absorption Heat Pump. Procedia Engineering 205: 485-491
Liu, K.; Gu, X.; Ba, D.; Li, P.; Du, G.; Yue, X.; Yang, N. 2012: Numerical Research on Flow Characteristics of Vortex Stage in Dry High Vacuum Pump. Physics Procedia 32: 127-134
Liu, H.; Ding, J.; Dai, H.; Tan, M.; Tang, X. 2014: Numerical Research on Hydraulically Generated Vibration and Noise of a Centrifugal Pump Volute with Impeller Outlet Width Variation. Mathematical Problems in Engineering 2014: 1-13
Cai, H.; Li, J.; Yu, L.P.; Liu, Y.F.; Geng, Y.H. 2014: Numerical Research on Internal Flow Induced Noise of Rotor Oil Pump. Advanced Materials Research 915-916: 171-175
Hou, S. 2020: Numerical Research on Mode Competition of a Coaxial Corrugated Gyrotron with two Electron Beams. IEEE Transactions on Plasma Science 48(4): 876-883
Fan, X.T.; Shao, M.; Sun, J.W.; Zheng, S.S.; Qi, Y. 2013: Numerical Research on Mooring System of Wave Measuring Buoy. Advanced Materials Research 787: 439-444
Wang, Y.D.; Shen, W.L. 2012: Numerical Research on Performance Prediction for Aquatics Hub Cutter. Advanced Materials Research 479-481: 1618-1621
Sun, J.P.; Shao, G.B.; Jiang, Z.B. 2012: Numerical Research on Relationship between Displacement and Ground Overloading of Soil Nailing with FLAC. Advanced Materials Research 446-449: 1343-1347
Hefeng, D.; Chenxi, W.; Shaobin, L.; Xi Zhen, S. 2015: Numerical Research on Segmented Flexible Airfoils Considering Fluid-structure Interaction. Procedia Engineering 99: 57-66
Chen, X.; Li, T.; Li, X. 2016: Numerical Research on Shape Optimization of Microchannels of Passive Micromixers. IEEE Sensors Journal 16(17): 6527-6532
Wu, M.; Shi, A.G.; Wang, Z.C.; Wang, X.; Ying, R.R. 2013: Numerical Research on Ship Motions in Oblique Irregular Waves. Advanced Materials Research 712-715: 1531-1534
Ren, H.; Gao, H.; Li, C.; Li, Q.; Wang, Z. 2021: Numerical Research on Space Charge inside Solid Dielectrics under Unipolar and Bipolar Voltage Conditions. IEEE Transactions on Dielectrics and Electrical Insulation 28(1): 98-106
Wang, M.; Su, F. 2012: Numerical Research on Stochastic Duffing System. Procedia Engineering 29: 1979-1983
Xiao, H.; Liu, Z. 2014: Numerical Research on Turbine Disc Cavity Prewhirl Flow and Heat Transfer. Journal of Computational and Theoretical Nanoscience 11(4): 1086-1091
Ji, J.; Zhang, J.; Gao, R.; Shi, B.; Li, X.; Li, F.; Deng, X. 2021: Numerical Research on Vibration-Enhanced Heat Transfer of Elastic Scroll Tube Bundle. Journal of Thermophysics and Heat Transfer: 1-8
Peng, Y.; Chen, X.; Zhang, K.; Hou, G. 2007: Numerical Research on Water Guide Bearing of Hydro-Generator Unit Using Finite Volume Method. Journal of Hydrodynamics 19(5): 635-642
Hou, S.; Hou, C.; Chen, Q.; Yu, S.; Li, H. 2017: Numerical Research on a 170-GHz Time-Dependent Multimode Coaxial Gyrotron with Outer Corrugation. IEEE Transactions on Plasma Science 45(8): 2220-2226
Liu, J.Y.; Gong, M.Q.; Zhang, Y.; Hong, H.; Wu, J.F. 2005: Numerical Research on a Special Fluid Phenomenon: Ranque-Hilsch Effect. Modern Physics Letters B 19(28n 29): 1723-1726
Qiao, Z.; Liu, Z. 2019: Numerical Research on a Three-Dimensional Solid Element Based on Generalized Elasticity Theory. Mathematical Problems in Engineering 2019: 1-10
Xiao, X.; Tong, X.; Li, Y.; Yang, M.; Gao, G. 2017: Numerical Research on the Effect of Boundary Constraint in Shot Peen Forming. Journal of Materials Engineering and Performance 26(8): 3839-3853
Shen, S.; Lin, J. 2009: Numerical Research on the Effect of Fibers on the Property of Turbulent Fiber Suspension in a Channel. Modern Physics Letters B 23(03): 509-512
Lai, F.; Zhu, X.; Li, G.; Zhu, L.; Wang, F. 2019: Numerical Research on the Energy Loss of a Single-Stage Centrifugal Pump with Different Vaned Diffuser Outlet Diameters. Energy Procedia 158: 5523-5528
Xiao, F.K.; Zhang, C.J.; Gao, L.W.; Yue, Y.Y. 2012: Numerical Research on the Floor Heave Control of Deep Roadway in Coal Mining. Advanced Materials Research 524-527: 446-449
Liu, S.; Ren, Q.W.; Zhou, C.L. 2014: Numerical Research on the Gravity Dam Deep Anti-Sliding with Engineering Mechanics Based on Damage Theory. Advanced Materials Research 910: 289-296
Zheng, X.T.; Nie, S.H.; Yu, J.Y.; Lin, W.; Liu, Q. 2012: Numerical Research on the Heat Transfer Properties of Pulsating Flow around the Vibrating Tube. Advanced Materials Research 594-597: 2582-2585
Vysokomornaya, O.V.; Kuznetsov, G.V.; Strizhak, P.A. 2014: Numerical Research on the Influence of Autonomous Power Plant Condenser Design on Two-Phase Stream Parameters. Advanced Materials Research 1040: 547-552
Cui, J.; Zhao, B.; Liu, Y.; Li, S. 2014: Numerical Research on the Safety and Performance of Transonic Compressor with Bleed Air at Multiple Operation State. Procedia Engineering 80: 352-364
Feng, X.; Lu, C.; Wu, Q.; Cai, R. 2012: Numerical Researches on Interaction Between Propellers in Uniform Flow. Journal of Hydrodynamics 24(5): 675-683
Chen, Q.; Qin, Z.; Temam, R. 2011: Numerical Resolution Near t = 0 of Nonlinear Evolution Equations in the Presence of Corner Singularities in Space Dimension 1. Communications in Computational Physics 9(3): 568-586
Dellacherie, S. 2002: Numerical Resolution of An Ion–electron Collision Operator in Axisymmetrical Geometry. Transport Theory and Statistical Physics 31(4-6): 397-429
Kabar, Y.; Rebay, M.; Kadja, M.; Padet, C. 2010: Numerical Resolution of Conjugate Heat Transfer Problem in a Parallel-Plate Micro-Channel. Heat Transfer Research 41(3): 247-263
Masao, T. 1956: Numerical Responces of Aciduric Bacteria to Dental States in the Mouth. THE JOURNAL OF THE STOMATOLOGICAL SOCIETY, JAPAN 23(2): 93-100
Gakenheimer, D.C. 1970: Numerical Results for Lamb's Point Load Problem. Journal of Applied Mechanics 37(2): 522-524
Barakat, R.; Cohen, E. 1966: Numerical Results for Scattering by a Hemisphere on a Plane. Journal of the Acoustical Society of America 39(4): 753-755
Uecker, H.; Wetzel, D. 2014: Numerical Results for Snaking of Patterns over Patterns in Some 2D Selkov--Schnakenberg Reaction-Diffusion Systems. SIAM Journal on Applied Dynamical Systems 13(1): 94-128
Diaconis, P.; Neuberger, J.W. 2004: Numerical Results for the Metropolis Algorithm. Experimental Mathematics 13(2): 207-213
Nakamura, A.; Saito, T.; Sakai, S. 1998: Numerical Results for transport coefficients of quark gluon plasma with Iwasaki's improved action. Nuclear Physics B - Proceedings Supplements 63(1-3): 424-426
Smagorinsky, J.; Manabe, S.; Holloway Jr., J.L. 1965: Numerical Results from a Nine-Level General Circulation Model of the Atmosphere1. Monthly Weather Review 93(12): 727-768
Baldonado, O.C.; Erdmann, R.C. 1969: Numerical Results of Interfacial Effects on Neutron Waves. Nuclear Science and Engineering 37(1): 59-65
Hejczyk, T.; Urbańczyk, M.; Jakubik, W. 2010: Numerical Results of Modeling Semiconductor Sensor Layers in SAW Gas Sensors. Acta Physica Polonica A 118(6): 1158-1160
Coulibaly, A.; Tuo, D.P.; Adje, A. 2015: Numerical Results of Primal-Dual Interior-Point Algorithms for Semidefinite Optimization Based on Kernel Functions. Far East Journal of Applied Mathematics 93(3): 231-245
Laging, G.; Rothert, H. 1986: Numerical Results of Tire-Test Drum Interaction. Tire Science and Technology 14(3): 160-175
Miller, J.; Thomas, J. 1975: Numerical Results on the Convergence of Relative Efficiencies. IEEE Transactions on Aerospace and Electronic Systems AES-11(2): 204-209
Herrmann, H J. 1989: Numerical Results on the Dynamical Scaling of Percolation. Physica Scripta T 25: 254-255
Wei, H. 2010: Numerical Revisit to a Class of One-Predator, Two-Prey Models. International Journal of Bifurcation and Chaos 20(08): 2521-2536
Fritz, H. 2014: Numerical Ricci–de Turck flow. Numerische Mathematik 131(2): 241-271
Voegel, T.; Hinze, J.; Tobin, F. 1979: Numerical SCF method for the calculation of static polarizabilities and hyperpolarizabilities for atoms, he through Ne. The Journal of Chemical Physics 70(3): 1107-1111
Schluckner, C.; Subotić, V.; Lawlor, V.; Hochenauer, C. 2016: Numerical SOFC Anode Catalyst Occupation Study: Internal Reforming of Carbonaceous Fuel Mixtures. Journal of The Electrochemical Society 163(7): F761-F770
Braun, A.; Cuomo, S.; Petrosino, S.; Wang, X.; Zhang, L. 2017: Numerical SPH analysis of debris flow run-out and related river damming scenarios for a local case study in SW China. Landslides 15(3): 535-550
Fazio, R. 2008: Numerical Scaling Invariance Applied to the van der Pol Model. Acta Applicandae Mathematicae 104(1): 107-114
Bezzola, A.; Bales, B.B.; Petzold, L.R.; Alkire, R.C. 2014: Numerical Scaling Studies of Kinetically-Limited Electrochemical Nucleation and Growth with Accelerated Stochastic Simulations. Journal of The Electrochemical Society 161(8): E3001-E3008
Konschin, A. 2021: Numerical Scheme for Electromagnetic Scattering on Perturbed Periodic Inhomogeneous Media and Reconstruction of the Perturbation. SIAM Journal on Scientific Computing 43(3): B712-B732
Vauchelet, N.; Yasuda, S. 2021: Numerical Scheme for Kinetic Transport Equation with Internal State. Multiscale Modeling-Simulation 19(1): 184-207
Anakira, N.R.; Alomari, A.K.; Hashim, I. 2013: Numerical Scheme for Solving Singular Two-Point Boundary Value Problems. Journal of Applied Mathematics 2013: 1-8
Kumar, P.; Agrawal, O.P. 2005: Numerical Scheme for the Solution of Fractional Differential Equations of Order Greater than one. Journal of Computational and Nonlinear Dynamics 1(2): 178-185
Ak, T.; Karakoc, S.B.G.; Biswas, A. 2016: Numerical Scheme to Dispersive Shallow Water Waves. Journal of Computational and Theoretical Nanoscience 13(10): 7084-7092
Suga, S. 2006: Numerical Schemes Obtained from Lattice Boltzmann Equations for Advection Diffusion Equations. International Journal of Modern Physics C 17(11): 1563-1577
Jin, S.; Levermore, C. 1996: Numerical Schemes for Hyperbolic Conservation Laws with Stiff Relaxation Terms. Journal of Computational Physics 126(2): 449-467
Crouseilles, N.; Hivert, H.; Lemou, M. 2016: Numerical Schemes for Kinetic Equations in the Anomalous Diffusion Limit. Part I: the Case of Heavy-Tailed Equilibrium. SIAM Journal on Scientific Computing 38(2): A737-A764
Crouseilles, N.; Hivert, H.; Lemou, M. 2016: Numerical Schemes for Kinetic Equations in the Anomalous Diffusion Limit. Part II: Degenerate Collision Frequency. SIAM Journal on Scientific Computing 38(4): A2464-A2491
Creusen, E. 2013: Numerical Schemes for Linear and Non-Linear Enhancement of DW-MRi. Numerical Mathematics: Theory, Methods and Applications 6(1): 138-168
Deya, A. 2011: Numerical Schemes for Rough Parabolic Equations. Applied Mathematics-Optimization 65(2): 253-292
Ji, C.; Dai, W.; Sun, Z. 2019: Numerical Schemes for Solving the Time-Fractional Dual-Phase-Lagging Heat Conduction Model in a Double-Layered Nanoscale Thin Film. Journal of Scientific Computing 81(3): 1767-1800
Grooms, I.; Lee, Y.; Majda, A.J. 2015: Numerical Schemes for Stochastic Backscatter in the Inverse Cascade of Quasigeostrophic Turbulence. Multiscale Modeling-Simulation 13(3): 1001-1021
sci, g. 2021: Numerical Schemes for Time-Space Fractional Vibration Equations. Advances in Applied Mathematics and Mechanics 13(4): 806-826
Barth, T.J.; Sethian, J.A. 1998: Numerical Schemes for the Hamilton–Jacobi and Level Set Equations on Triangulated Domains. Journal of Computational Physics 145(1): 1-40
D'Apice, C.; Manzo, R.; Piccoli, B. 2013: Numerical Schemes for the Optimal Input Flow of a Supply Chain. SIAM Journal on Numerical Analysis 51(5): 2634-2650
Carrillo, J.A.; Goudon, T.; Lafitte, P.; Vecil, F. 2008: Numerical Schemes of Diffusion Asymptotics and Moment Closures for Kinetic Equations. Journal of Scientific Computing 36(1): 113-149
Chen, C.; Liu, F.; Anh, V.; Turner, I. 2010: Numerical Schemes with High Spatial Accuracy for a Variable-Order Anomalous Subdiffusion Equation. SIAM Journal on Scientific Computing 32(4): 1740-1760
Li, T.Y.; Wang, X.; Wu, M. 2002: Numerical Schubert Calculus by the Pieri Homotopy Algorithm. SIAM Journal on Numerical Analysis 40(2): 578-600
Leykin, A.; Martín del Campo, A.; Sottile, F.; Vakil, R.; Verschelde, J. 2021: Numerical Schubert calculus via the Littlewood-Richardson homotopy algorithm. Mathematics of Computation 90(329): 1407-1433
Tso, C.P.; Jin, L.F.; Tou, S.K.W. 2007: Numerical Segregation of the Effects of Body Forces in a Rotating, Differentially Heated Enclosure. Numerical Heat Transfer, Part A: Applications 51(1): 85-107
Seitz, W.S.; Eilenberg, S.L. 1967: Numerical Self‐Consistent Field Approximation to the Interaction of an Ion Beam with a Plasma Boundary. Journal of Applied Physics 38(1): 276-283
Chang, G.W.; Kim, H.; Lim, J.W. 2012: Numerical Semigroup Rings and Almost Prüferv-Multiplication Domains. Communications in Algebra 40(7): 2385-2399
Eaton, R.; Herzinger, K.; Pierce, I.; Thompson, J. 2020: Numerical Semigroups and the Game of Sylver Coinage. The American Mathematical Monthly 127(8): 706-715
Kiers, C.; O'Neill, C.; Ponomarenko, V. 2016: Numerical Semigroups on Compound Sequences. Communications in Algebra 44(9): 3842-3852
Rosales, J. 2000: Numerical Semigroups with Apéry Sets of Unique Expression. Journal of Algebra 226(1): 479-487
Ameli, A.; Uusitalo, A.; Turunen-Saaresti, T.; Backman, J. 2017: Numerical Sensitivity Analysis for Supercritical CO 2 Radial Turbine Performance and Flow Field. Energy Procedia 129: 1117-1124
Griesse, R.; Vexler, B. 2007: Numerical Sensitivity Analysis for the Quantity of Interest in PDE‐Constrained Optimization. SIAM Journal on Scientific Computing 29(1): 22-48
Vujičić, M.R.; Lavery, N.P.; Brown, S.G.R. 2006: Numerical Sensitivity and View Factor Calculation Using the Monte Carlo Method. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 220(5): 697-702
Khodapanah, E. 2014: Numerical Separation of Vector Wave Equation in a 2-D Doubly Connected Domain. IEEE Transactions on Microwave Theory and Techniques 62(11): 2551-2562
Van Vleck, E.S. 2000: Numerical Shadowing Using Componentwise Bounds and a Sharper Fixed Point Result. SIAM Journal on Scientific Computing 22(3): 787-801
Vita, S.F. 1993: Numerical Shape Optimization for Relaxed Dirichlet Problems. Mathematical Models and Methods in Applied Sciences 03(01): 19-34
Happ, F.; Schroder, A.; Mavraj, G.; Bruns, H.; Gronwald, F. 2017: Numerical Shielding Analysis of Anisotropic Multilayer Materials by the Method of Moments. IEEE Transactions on Electromagnetic Compatibility 59(1): 293-296
Mhamed, S.; Bois, P.D.; Al-Bahkali, E. 2018: Numerical Shock Viscosity for Impact Analysis Using ALE Formulation. Computer Modeling in Engineering-Sciences 117(1): 91-107
Lee, J.W.; Kienle, A.; Seidel-Morgenstern, A. 2021: Numerical Short-Cut Design of Simulated Moving Bed Chromatography for Multicomponent Nonlinear Adsorption Isotherms: Nonstoichiometric Langmuir Model. Industrial-Engineering Chemistry Research 60(29): 10753-10763
Wang, H.; Yan, Y.; He, H.; Huang, X.; Dai, X.; Zhu, X.; Du, Z.; Zhao, H.; Yan, Y. 2017: Numerical Short-Term Solar Activity Forecasting. Proceedings of the International Astronomical Union 13(S 335): 243-249
Milinazzo, F.; Bluman, G.W. 1975: Numerical Similarity Solutions to Stefan Problems. ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik 55(7-8): 423-429
Fatnassi, C.; Boucenna, R.; Zaidi, H. 2015: Numerical Simpson's Rule for Real time and Accurate T2* maps generation Using 3D Quantitative GRE. IFMBE Proceedings: 107-110
Li, C.; Deng, T.F. 2011: Numerical Simulated Method on Wind Environmental of Outdoor. Advanced Materials Research 250-253: 3815-3821
Liu, Z.; Zhang, Y.; Huang, Z.; Gao, Y.; Zhang, Y. 2012: Numerical Simulating Research on Orifice Pre-splitting Blasting in Coal Seam. Procedia Engineering 45: 322-328
Xu, J.; Liu, B.; Zhao, D. 2012: Numerical Simulating for Turbulent Heat Transfer of Structural Improved Thermoacoustic Cooler. Procedia Engineering 29: 2177-2181
Xu, J.; Zhao, D.; Chen, F.; Xu, S. 2011: Numerical Simulating for Turbulent Heat Transfer of Thermoacoustic Cooler. Procedia Engineering 16: 789-795
Bai, L.; Wang, Y.; Hua, Y.W. 2014: Numerical Simulating the Ground Coefficient of Thermal Conductivity in Severe Cold Region. Advanced Materials Research 960-961: 366-369
Zhao, J.Z.; Chen, W.J.; Fu, G.Y.; Li, R.X. 2011: Numerical Simulation Algorithm for the Forming Process of Tensile Cable-Strut Structure. Advanced Materials Research 250-253: 1375-1384
Lai, Y.; Lin, Z.R.; Tian, Y.F. 2014: Numerical Simulation Analysis about Subside Extending Construction Process within Underground Cavities. Advanced Materials Research 1030-1032: 815-818
Zhang, C.; Wu, W.; Li, Y. 2011: Numerical Simulation Analysis for Anti-Penetration of Multilayer Ceramic Composite. Advanced Materials Research 396-398: 386-389
Chen, B.G.; Huang, Z.B.; He, X.T.; Liu, L.; Zhao, Z.B. 2015: Numerical Simulation Analysis for Padding Assisted Roll-Bending Process. Advanced Materials Research 1120-1121: 1153-1157
Li, M.; Jin, X.J.; Li, Y.H. 2013: Numerical Simulation Analysis of Auxiliary-Rod Force for Tower. Advanced Materials Research 671-674: 722-725
Pu, G.N.; Li, L.J.; Zhao, Y. 2012: Numerical Simulation Analysis of Beam-Reduction and Rib-Addition Strengthening Method of Hollow Slab Bridges. Advanced Materials Research 546-547: 57-65
Zhao, Z.M.; Chai, J.Y.; Fan, C.X. 2014: Numerical Simulation Analysis of Bearing Performance of Extra-Long and Large-Diameter Single Pile. Advanced Materials Research 1065-1069: 943-948
Han, J.Y.; Chen, G.J. 2011: Numerical Simulation Analysis of Centrifugal Pump Floating Ring Seal. Advanced Materials Research 317-319: 2148-2151
Zhou, N.; Cui, W.; Wang, K.Q.; Zhao, H.J. 2013: Numerical Simulation Analysis of Dangerous Heavy Gas Leakage and Diffusion. Advanced Materials Research 726-731: 1354-1357
Meng, L.L.; Huang, Y.Q.; Liu, M. 2011: Numerical Simulation Analysis of Deformation in TIG Welding of I-Steel. Advanced Materials Research 189-193: 2196-2199
Sun, G.Y.; Luo, X. 2013: Numerical Simulation Analysis of Different Coal Mine Roadway Support Effect. Advanced Materials Research 807-809: 2356-2360
Jiang, M.M. 2014: Numerical Simulation Analysis of Dynamic Characteristics of the Floor Partial Discontinuous Building. Advanced Materials Research 933: 323-325
Guo, W.L.; He, C. 2010: Numerical Simulation Analysis of Fluid in the Semi-State within the Desulphurization Tower. Advanced Materials Research 118-120: 921-924
Li, H.; Sun, H.; Feng, G. 2017: Numerical Simulation Analysis of Heat Storage and Release Performance in Baffle plate Phase Change Energy Storage Tank. Procedia Engineering 205: 3334-3339
Yi, X.K.; Wu, W.F.; Cui, H.L.; Li, J.X. 2012: Numerical Simulation Analysis of Heat and Mass Transfer during Drying of Jujubes. Advanced Materials Research 468-471: 2323-2327
Dazhi, Z.; Li, M.; Yong-Qiang, L. 2020: Numerical Simulation Analysis of Liquid Transportation in Capsule-type Vane Tank under Microgravity. Microgravity Science and Technology 32(5): 817-824
Tao, Z.; Wang, Y.; Li, M.; Wang, Y.; Han, W.; Yang, X. 2020: Numerical Simulation Analysis of Mechanical Properties and Application of Large Deformation Cable with Constant Resistance. Geotechnical and Geological Engineering 39(1): 81-93
Mu, J.C.; Xi, H.F.; Wu, Y.H.; Li, S.Q.; Yang, G.H. 2010: Numerical Simulation Analysis of Pullout Test of Planting Steel - a new Reinforcement Technique. Advanced Materials Research 163-167: 3739-3744
Chen, L.; Li, X.N.; Duan, J.L.; Liu, Y.Y. 2014: Numerical Simulation Analysis of Rail Head for U75V in the Process of Spray Cooling Temperature Field. Advanced Materials Research 941-944: 2425-2431
Chen, C.W. 2012: Numerical Simulation Analysis of Soil Nailing Wall Based on FLAC during the Excavation of the Foundation Pit. Advanced Materials Research 594-597: 2906-2914
Bi, D.S.; Yang, G.; Chu, L.; Zhang, J. 2011: Numerical Simulation Analysis of Spinning Forming Process of Tubeless Steel Wheel on Technical Parameters. Advanced Materials Research 189-193: 2322-2328
Yuan, J.Y.; Wang, C.F.; Cheng, J.H.; Zhang, D.B.; Wu, Z.H. 2013: Numerical Simulation Analysis of Temperature Field on Tympanites Roadbed. Advanced Materials Research 838-841: 1291-1294
Xu, A.; Li, H.; Feng, G. 2017: Numerical Simulation Analysis of Temperature and Pollutant Concentration Diffusion in the Open Kitchen Cooking Area. Procedia Engineering 205: 1165-1172
Li, Z.J.; Zhao, X.L.; Zhang, Y. 2012: Numerical Simulation Analysis of Underground Integrated Support under High Stress. Advanced Materials Research 466-467: 1031-1035
Azaman, M.D.; Sapuan, S.M.; Sulaiman, S.; Zainudin, E.S.; Khalina, A. 2015: Numerical Simulation Analysis of Unfilled and Filled Reinforced Polypropylene on Thin-Walled Parts Formed Using the Injection-Moulding Process. International Journal of Polymer Science 2015: 1-8
Zhang, S.; Lu, P.; Wang, H. 2019: Numerical Simulation Analysis of Unsteady Temperature in Thermal Insulation Supporting Roadway. Mathematical Problems in Engineering 2019: 1-8
Shen, Y.; Zhang, K.H.; Chen, Y.; Zhu, H.; Fei, K. 2011: Numerical Simulation Analysis of Vibrating Screen's Structure Vibration Property. Advanced Materials Research 215: 272-275
Shirahata, T. 2015: Numerical Simulation Analysis of a Mathematical Model of Circadian Pacemaker Neurons. Applied Mathematics 06(08): 1214-1219
Wang, Q.; Wang, J.; Zhang, S. 2007: Numerical Simulation Analysis of an Optical Virtual Probe Based on Surface Plasmon Polaritonic Band-gap Structures. PIERS Online 3(1): 7-12
Xu, X.B.; Luo, H.R. 2012: Numerical Simulation Analysis of the Cold Bending Forming Technology Based on DEFORM. Advanced Materials Research 490-495: 3353-3357
Guan, J.J.; Wang, Z.J.; Zhang, Y.H. 2012: Numerical Simulation Analysis of the Effect of Sheet Property on Forming Safety Margin of Drawing Panel. Advanced Materials Research 503-504: 863-866
Zhang, M.C.; Fei, P.C.; Zou, D.L. 2012: Numerical Simulation Analysis of the Nanyangpo Coal Mine Anchor Support Method. Advanced Materials Research 619: 231-238
Jiang, J.T.; Liu, Y.; Wu, W.H.; Yang, S.; Du, D.R. 2012: Numerical Simulation Analysis of the Typical Reinforced-Concrete Wall-Beam Joint. Advanced Materials Research 594-597: 973-976
Tian, Z.C.; Dong, L.H.; Liu, Y.J. 2013: Numerical Simulation Analysis on Deformation Mechanism of Shallow-Buried Soft Rock Roadway. Advanced Materials Research 734-737: 773-776
Zong, Q.; Yan, L.P.; Wang, H.B. 2011: Numerical Simulation Analysis on Explosion Stress Field of Different Charge Construction. Advanced Materials Research 250-253: 2612-2616
Wang, D.; Jiang, X.S.; Ou, Y.H.; Zhou, J.Z. 2013: Numerical Simulation Analysis on Hazardous Area of Oil Gas Leakage and Dispersion in Underground Fuel Depot. Advanced Materials Research 827: 220-223
Li, Y.G.; Hu, Y.D.; Wu, L.Y.; Yu, C.L. 2012: Numerical Simulation Analysis on Lengthwise Graphitization Furnace Co-Production Silicon Carbide. Advanced Materials Research 557-559: 835-838
Jin, G.D.; Lu, L.B.; Gu, L.X.; Liang, J. 2013: Numerical Simulation Analysis on Repairing Hole of UAV Wing. Advanced Materials Research 690-693: 2891-2895
Hu, Q.G.; Cui, W.F.; Gao, J.W.; Yin, J. 2013: Numerical Simulation Analysis on Seismic Behavior of a new Type Prefabricated Slab. Advanced Materials Research 639-640: 886-890
Yu, H.R.; Zhou, X.J.; Wang, X.B. 2011: Numerical Simulation Analysis on a Construction Method of Ultra-Closing Over-Cross Transportation Tunnels. Advanced Materials Research 261-263: 1287-1291
Wang, F.; Shi, C.; Chen, K.H.; Li, D.J.; Han, K. 2014: Numerical Simulation Analysis on the Collapse of Slope in Iron Mine. Advanced Materials Research 926-930: 593-596
Ren, N.F.; Jia, L.; Wang, D. 2013: Numerical Simulation Analysis on the Temperature Field in Indirect Selective Laser Sintering of 316L. Advanced Materials Research 711: 209-213
Huang, H.G.; Zheng, H.P.; Du, F.S.; Wang, W.Z. 2011: Numerical Simulation Analysis on the Ten Cross Rolls Straightening Process of the Heavy Calibre Seamless Steel Tube. Advanced Materials Research 421: 56-59
Huang, Z.; Jin, G.; Wang, X. 2011: Numerical Simulation Applied for Unsymmetrical Dimethylhydrazine Propellant Gas Dispersion Based on Cfd Technology. Environmental Engineering and Management Journal 10(7): 971-974
Cheng, S.J.; Miao, J.M.; Tai, C.H. 2012: Numerical Simulation Applied to Study the Effects of Fractal Tree-Liked Network Channel Designs on PEMFC Performance. Advanced Materials Research 488-489: 1219-1223
Greif, D.; Kopun, R.; Kosir, N.; Zhang, D. 2017: Numerical Simulation Approach for Immersion Quenching of Aluminum and Steel Components. International Journal of Automotive Engineering 8(2): 45-49
Xu-Hai, C.; Shao-Li, L.; Jing-Hua, C.; Min, D.; Xin-Hua, L.; , 2012: Numerical Simulation Based Accurate Models of Improved Chronoamperometry and its Experimental Validation. Acta Physico-Chimica Sinica 28(04): 877-884
Shi, X.; Chen, J. 2012: Numerical Simulation Based on CFD for the Movement Field of the Hydraulic Poppet Valve. Advanced Materials Research 466-467: 1266-1270
Li, Z.; Li, K. 2008: Numerical Simulation Bistatic Scattering from Three-Dimensional Conducting Rough Surface with UV Multilevel Partitioning Method Using Pulse Vector Basic Function. Journal of Infrared, Millimeter, and Terahertz Waves 30(2): 137-150
Qin, Y.; Liang, X.; Zhang, J.N. 2012: Numerical Simulation Calculation of Hydroplane Direct Route Motion Based on FLUENT. Advanced Materials Research 569: 368-375
Guang-Jin, W.; Li-Wei, Y.; Hong-Jun, J.; Xiang-Yun, K.; Chun-He, Y. 2016: Numerical Simulation Experiment on the Organization and Structure of Granular Media Based on the HHC-Soil Model. Journal of Computational and Theoretical Nanoscience 13(4): 2359-2363
Gong, C.; Fang, Z. 2021: Numerical Simulation Framework for Fluid–Structure Interaction of Flapping Flight. AIAA Journal 59(9): 3794-3798
Ran, X.W.; Tang, W.K.; Chen, H. 2013: Numerical Simulation Ignition of Energetic Material with Femtosecond Laser. Advanced Materials Research 760-762: 65-69
Chen, S.Q.; Wang, H.Q.; Cheng, J.L. 2011: Numerical Simulation Investigation of Dust-Controlling Equipment of Main Fan Diffuser of Coal Mine. Advanced Materials Research 356-360: 1293-1297
Xu, Z.M.; Hong, Z.H.; Wang, Q.A.; Wu, H.B. 2014: Numerical Simulation Investigation on Single-Layer Multi-Tracks Laser Milling of Al2O3 Ceramic. Advanced Materials Research 971-973: 111-114
Han, X.W.; Chen, D.P. 2012: Numerical Simulation Life Prediction of Alu- Alloy die -Casting Dies. Advanced Materials Research 472-475: 2296-2303
Feng, W.J.; Ju, X.D.; Zou, Z.S. 2012: Numerical Simulation Method Ascertaining Slope Stabilization Anti-Slippery Pile's Basic Parameters. Advanced Materials Research 594-597: 222-225
Yang, W.Q.; Song, B.F.; Song, W.P.; Li, Z.K.; Zhang, Y.F. 2011: Numerical Simulation Method for 3D Low Speed Micro Flapping-Wing with Complex Kinematics. Advanced Materials Research 308-310: 332-335
Wang, X.L.; Ma, G.S.; Qi, C.L. 2010: Numerical Simulation Method for Predicting Chloride Concentration Distributing around Reinforcement in Concrete. Advanced Materials Research 163-167: 3138-3142
Li, Q.; Yang, Q.S.; Jin, Y.F. 2011: Numerical Simulation Method for Unsteady Wind Field around Building. Advanced Materials Research 243-249: 521-526
Li, Y. 2007: Numerical Simulation Method of Heat-Resistant Hetergeneous Graded Ceramics Structure on Vehicle. Key Engineering Materials: 2628-2630
Yang, S.C.; Zhang, J.H. 2014: Numerical Simulation Method of Tensile Behavior of Glass Fiber Laminates. Advanced Materials Research 919-921: 1386-1389
Xiang, B.S.; Han, X.; Wang, X.W. 2014: Numerical Simulation Method of Track Irregularities Based on Secondary Filtering. Advanced Materials Research 1008-1009: 1525-1529
Li, J.K.; Fan, Y.B.; Su, H.Z. 2013: Numerical Simulation Method to Analysis of Strengthening Effect in the Zhong Long Park. Advanced Materials Research 848: 104-107
Shi, W.; Chen, X.W.; Liu, J.M. 2011: Numerical Simulation Methods and Parameters of Geo-Grid Rein-Forced Retain Fly Ash Wall. Advanced Materials Research 243-249: 2512-2517
Wang, T. 2017: Numerical Simulation Model of Mining-Induced Fault Reactivation. Wireless Personal Communications 102(2): 1327-1336
Wang, J Z.; Gong, C L.; Tian, G Y.; Lucas, G P. 2006: Numerical Simulation Modelling for Velocity Measurement of Electromagnetic Flow Meter. Journal of Physics: Conference Series 48: 36-40
Lv, Q.Q.; Yang, L.Q.; Lv, X.T.; Zhao, L.; Wang, X.K. 2013: Numerical Simulation Optimization Research of Cold Extrusion Forming for Injection Head. Advanced Materials Research 706-708: 444-447
Yin, D.Y.; Ying, B.; Zhou, W.; Zhang, C.L. 2012: Numerical Simulation Optimization Study on Adjusting well Pattern and Productive Series in Xingqi Area. Advanced Materials Research 616-618: 669-673
Fu, C.J. 2011: Numerical Simulation Procedure of RC Beam Reinforcement with FRP. Advanced Materials Research 243-249: 5567-5570
Huang, L.; Liu, X.B. 2012: Numerical Simulation Research about Group High-Rise Buildings around Wind Environment. Advanced Materials Research 446-449: 657-660
Niu, C.; Lu, Y.G.; Tao, J.L. 2013: Numerical Simulation Research for CFST Columns under Blast Load. Advanced Materials Research 838-841: 644-647
Liu, B.J.; Xu, Q. 2011: Numerical Simulation Research for Stress and Distortion of Pile-Anchor Support Structure of the Deep Foundation. Advanced Materials Research 243-249: 3128-3131
An, L.; Huang, J.; Feng, L.; Zhang, J. 2012: Numerical Simulation Research for a Tangentially Corner Inlet Hydro-cyclone on the Velocity Distribution. Physics Procedia 33: 647-656
Chen, L.; Wu, C.X.; Bi, K.X. 2013: Numerical Simulation Research of Equivalent Strain in Every Pass of H-Beam in Cogging Beam Blank. Advanced Materials Research 634-638: 3835-3839
Zhao, T.B.; Yin, Y.C.; Sun, Q.; He, S.D. 2011: Numerical Simulation Research of Flexible Shield Support Lateral Caving Technology. Advanced Materials Research 284-286: 633-637
Wang, X.; Huai, T.; Li, Y. 2017: Numerical Simulation Research of Horizontal Single-Tube Falling Film Evaporation. Procedia Engineering 205: 1500-1506
Zhai, X.; Luo, W. 2012: Numerical Simulation Research of Interior Ballistics Character for Non-lethal Strike Weapon System. Procedia Engineering 31: 308-314
Zeng, X.T.; Wang, N.; Jiang, C.; Zhang, Y.Y.; He, C.H. 2014: Numerical Simulation Research of Optimization Design of Supporting Half-Coal Roadway in Deep Stope Working Face. Advanced Materials Research 945-949: 1169-1174
Guo, W.G.; Jin, Q.L. 2013: Numerical Simulation Research of Tailor-Welded Blanks. Advanced Materials Research 690-693: 2625-2630
Ren, L.X.; Lu, H.W.; Du, P. 2013: Numerical Simulation Research on Coal Combustion. Advanced Materials Research 742: 501-505
Wang, Q.; Feng, J.; Sun, B.; Qi, Y.; Chen, D.; Luo, J. 2012: Numerical Simulation Research on Gas-Solid two Phase Flow in Oil Shale Circulating Fluidized Bed. Energy Procedia 17: 851-860
Chen, T.P.; Jiang, C.; Wang, L.L.; Ma, F.C. 2013: Numerical Simulation Research on Horizontal well to Exploit Remaining Oil of Lateral Accretion Interbed after Polymerflooding. Advanced Materials Research 807-809: 2568-2572
Yang, J.; Zhou, L. 2014: Numerical Simulation Research on Hydroforming Process of Automobile Front Transom. Advanced Materials Research 1004-1005: 1369-1372
Zhou, J.J.; Wang, H.; Wang, D.B.; Zhang, K. 2011: Numerical Simulation Research on Louver Fin in Air Conditioning for Cars. Advanced Materials Research 383-390: 6463-6468
Niu, L.; Zhang, Z.C.; Liu, X.L.; Tao, J.L.; Lu, Y.G. 2011: Numerical Simulation Research on Single Hole_unilateral Protecting Borehole Wall Blasting. Advanced Materials Research 368-373: 395-398
Wang, W.; Huang, H.G.; An, Z.J. 2013: Numerical Simulation Research on Triple Splitting Rolling Process. Advanced Materials Research 699: 802-807
Yuan, J.P.; Sun, W.; Wang, L.Y.; Liang, Y. 2012: Numerical Simulation Research on Vortex Characteristics of Centrifugal Pump Inlet Recirculation. Advanced Materials Research 468-471: 2235-2240
Yan, K.L.; Jin, J.S.; Wang, X.Y.; Xia, J.C.; Li, J.J. 2012: Numerical Simulation Research on Warm Forging Process for Spur Gear with Large Module Based on Floating die Method. Advanced Materials Research 602-604: 1910-1915
Zhang, Q.; Fan, S.Q.; Zhao, S.D.; Wang, C.H. 2010: Numerical Simulation Research on a new Spinning Process: Double-Roller Clamping Spinning Process. International Journal of Material Forming 3(S 1): 121-125
Zhou, C.M.; Zhang, D.J. 2012: Numerical Simulation Research on the Influence of Tailings Surcharge Load at Open-Pit Mine. Advanced Materials Research 507: 237-241
Yu, J.J.; Cheng, Q.G.; Li, C.H.; Wen, H. 2011: Numerical Simulation Research on the Settlement Regularity in Pile-Net Composite Foundation. Advanced Materials Research 261-263: 1251-1256
Li, Q.; Bu, W.K.; Xu, H.; Song, X.B. 2012: Numerical Simulation Research on the Shape of Top Coal Drawn-Body in Gently Inclined Seam. Advanced Materials Research 468-471: 2248-2254
Cao, S.; Huo, S.; Guo, A.; Qin, K.; Xie, Y.; Meng, Z. 2021: Numerical Simulation Research on the Stability of Urban Underground Interchange Tunnel Group. Mathematical Problems in Engineering 2021: 1-13
Zeng, J.M.; Liang, J.; Hu, Z.L.; Chen, P.; Liang, L.H. 2011: Numerical Simulation Software of Casting Process used for Computer Aided Instruction. Advanced Materials Research 399-401: 13-16
Xu, F.; Wang, A.; Yang, X.; You, H. 2005: Numerical Simulation Solution of the BCS Pairing Problem. Communications in Theoretical Physics 44(1): 171-176
Huang, J.C.K. 1978: Numerical Simulation Studies of Oceanic Anomalies in the North Pacific Basin. I: the Ocean Model and the Long-Term Mean State. Journal of Physical Oceanography 8(5): 755-778
Zhang, X.; Cheng, J.; Shi, C.; Xu, X.; Borowski, M.; Wang, Y. 2019: Numerical Simulation Studies on Effects of Explosion Impact Load on Underground Mine Seal. Mining, Metallurgy-Exploration 37(2): 665-680
Ding, M.; Hou, Z.H.; Jiang, X.G.; He, Y.Z.; Zhang, G.K.; Ju, J.S. 2010: Numerical Simulation Studies on Flexural Behavior of Casing Joint of Square Steel Tube. Advanced Materials Research 156-157: 1564-1567
Ding, M.; Hou, Z.H.; Jiang, X.G.; Lin, Z.C.; Zhang, G.K.; Ju, J.S. 2010: Numerical Simulation Studies on Tension Behavior of Casing and Dowel Joint of Square Steel Tube. Advanced Materials Research 156-157: 1555-1558
Yang, Z.; Liu, G.; Shao, H.; Sun, J.; Zhang, Y.; Ye, H.; Yang, M. 2013: Numerical Simulation Study and Preliminary Experiments of a Coaxial Vircator with Radial Dual-Cavity Premodulation. IEEE Transactions on Plasma Science 41(12): 3604-3610
Kim, J.; Xian, L.; Sadri, A.S. 2016: Numerical Simulation Study for Frequency Sharing Between Micro-Cellular Systems and Fixed Service Systems in Millimeter-Wave Bands. IEEE Access 4: 9847-9859
Brugnot, G.; Pochat, R. 1981: Numerical Simulation Study of Avalanches. Journal of Glaciology 27(95): 77-88
Zhang, W.D.; Wang, J.; Ren, S.R.; Wu, S.L.; Zhang, L. 2013: Numerical Simulation Study of CO2 Safety Storage in Saline Aquifers. Advanced Materials Research 807-809: 800-805
Zottin, W.; Bacchin, P.V.; Garcia, A.F. 2012: Numerical Simulation Study of Carbon Build-up and Oil Consumption in a Heavy Duty Diesel Engine. SAE International Journal of Engines 5(3): 1477-1486
Song, L.; Wei, S.P.; Gu, L.; Fan, C. 2014: Numerical Simulation Study of Concrete Beam with Bonding Steel Plates Bending Failure. Advanced Materials Research 889-890: 645-649
Rao, L.; Hu, Q.Y.; Li, X.L. 2011: Numerical Simulation Study of Consumable Electrode Melting Process in Electro-Slag Remelting Ingots. Advanced Materials Research 189-193: 3895-3898
Xu, B.R.; Jiang, M.H.; Zhao, L.X.; Tan, F.; Zhang, X.G. 2014: Numerical Simulation Study of Erosion for Fracturing Sandblasting in Elbow. Advanced Materials Research 1065-1069: 1911-1915
Tang, D.W.; Peng, R.S.; Zhao, R.L. 2011: Numerical Simulation Study of High-Speed Milling Thin-Wall Part. Advanced Materials Research 239-242: 801-805
Zhou, L.M.; Zhu, L.; Zhao, J.Q.; Zheng, M. 2013: Numerical Simulation Study of Impinging Jet Impact Fin Surface on Heat Transfer Characteristics. Advanced Materials Research 663: 586-591
Zhang, J.W.; Wu, W.Q. 2013: Numerical Simulation Study of Soluble and Conservative Liquid Chemicals Diffusion in Tidal River. Advanced Materials Research 864-867: 1427-1432
Xi, X.W.; Ren, S.K.; Huang, Y. 2014: Numerical Simulation Study of Stress-Magnetization Effect on Different Notch Steel Specimens. Advanced Materials Research 989-994: 891-897
Bamidele, O.E.; Ojo, O.A. 2021: Numerical Simulation Study of Temperature Gradient Transient Liquid Phase Bonding with Concentration-Dependent Diffusivity. Metallurgical and Materials Transactions A 52(6): 2261-2273
Ding, L.; Chen, H.Y.; Liang, B.C. 2013: Numerical Simulation Study of Wind and Wave Energy in Yellow River Delta. Advanced Materials Research 860-863: 324-330
Della Corte, F.G.; De Martino, G.; Pezzimenti, F.; Adinolfi, G.; Graditi, G. 2018: Numerical Simulation Study of a Low Breakdown Voltage 4H-Si C MOSFET for Photovoltaic Module-Level Applications. IEEE Transactions on Electron Devices 65(8): 3352-3360
Xu, S.H.; Zhang, F.J.; Wang, J.K.; Liu, C. 2013: Numerical Simulation Study of a new Type Solar Collector Wall System. Advanced Materials Research 860-863: 98-102
Hu, S.T.; Qi, F.; Xie, T.; Wang, X.X.; Wang, G.; Liu, G.D. 2013: Numerical Simulation Study of the Influence of Ceiling Materials to Roof Radiation Heat Exchange. Advanced Materials Research 756-759: 198-202
Li, G.C.; Sun, P.; Hu, P. 2013: Numerical Simulation Study of the Influence of Structural Parameters of Combustion Chamber on In-Cylinder Flow Field of Diesel Engine. Advanced Materials Research 860-863: 1729-1732
Wu, M.M.; Li, S.C.; Zhang, Q. 2014: Numerical Simulation Study of the Influence of Turning Depth on the Bending Vibration Mode of Work-Piece. Advanced Materials Research 936: 1840-1844
Zhang, G.; Guo, G.; Shen, S.; Guo, Q.; Zhang, S.; Wu, J. 2021: Numerical Simulation Study of the Strata Movement Rule of Deep Mining with the Super-Thick and Weak Cementation Overburden: a Case Study in China. Mathematical Problems in Engineering 2021: 1-20
Guo, S.Y.; Han, S.L. 2011: Numerical Simulation Study on BF Raceway. Advanced Materials Research 383-390: 4251-4256
Cao, H.; Chu, Y.; Wang, E.; Cao, Y.; Xia, G.; Zhang, Z. 2015: Numerical Simulation Study on Barrel Erosion of Ion Thruster Accelerator Grid. Journal of Propulsion and Power 31(6): 1785-1792
Qi, X.; Li, Y.; Li, C.; Mu, N.; Sun, H.; Chow, W. 2014: Numerical Simulation Study on Characteristics of Overflowing Smoke under Sprinkler Spray. Procedia Engineering 71: 182-187
Chen, X.; Shi, X.; Zhang, Y.; Zhang, Y.; Ma, Q. 2021: Numerical Simulation Study on Coal Spontaneous Combustion: Effect of Porosity Distribution. Combustion Science and Technology: 1-22
Zhang, X.M.; Cui, D.; Jia, H.J.; Liang, H. 2010: Numerical Simulation Study on Damage Mechanism of Throat Armor. Advanced Materials Research 148-149: 289-292
Wang, S.P.; Yu, R.Z.; Bian, Y.A. 2012: Numerical Simulation Study on Diamond-Shape Inverted Nine-Spot well Pattern. Advanced Materials Research 594-597: 2632-2635
Rongze, Y.; Yanan, B.; Kaijun, W.; Zhengming, Y.; Xiaoliang, Z. 2012: Numerical Simulation Study on Diamond-Shape Inverted Nine-Spot well Pattern. Physics Procedia 24: 390-396
Lei, J.; Zhang, J.; Zhang, L. 2021: Numerical Simulation Study on Distribution of Bubble in Flow near Aerator Based on CFD-PBM Coupled Model in Tunnel. Mathematical Problems in Engineering 2021: 1-24
Liu, M.; Liu, J.; Liu, G.; Shan, P.; Xiao, Z.; Zhao, F. 2019: Numerical Simulation Study on Flow and Fracture of Granular Materials. Mathematical Problems in Engineering 2019: 1-19
Guo, L.; Chen, P.; Li, L.; Gou, Y.; Liu, H.; Liu, Z.; Xin, L.; Tian, J. 2021: Numerical Simulation Study on Gain Nonlinearity of Microchannel Plate in Photomultiplier Tube. IEEE Transactions on Nuclear Science 68(12): 2711-2716
Song, L.S.; Li, S.G.; Yan, T.X. 2013: Numerical Simulation Study on Ground Stress Distribution around Thrust Fault. Advanced Materials Research 838-841: 773-778
Yang, X.M.; Wang, J.Y. 2012: Numerical Simulation Study on Healthy Monitoring of the Framework Based on Aseismatic Behavior. Advanced Materials Research 479-481: 1253-1257
Sun, S.M.; Zheng, L.Q. 2011: Numerical Simulation Study on Heat Pipe Cooling System of Proton Exchange Membrane Fuel Cell. Advanced Materials Research 347-353: 893-896
Zhuang, X.H.; Zhang, D.H.; Xie, J. 2013: Numerical Simulation Study on Hei47 Block in the Daqingzijing Oilfield. Advanced Materials Research 868: 15-19
Liu, B.Y.; Yang, D. 2013: Numerical Simulation Study on High Dip Bedded Soft Rock Slope Stability of Surface Mine. Advanced Materials Research 868: 391-394
Nie, X.T.; Chen, W.H.; Wang, Y.X. 2014: Numerical Simulation Study on High-Cycle Fatigue Damage for Metals. Advanced Materials Research 941-944: 1477-1482
Jiang, Z.A.; Liu, X.L. 2012: Numerical Simulation Study on High-Rise Student Apartment Fire Evacuation. Advanced Materials Research 433-440: 3011-3016
Zhao, J.; Wang, G.Y.; Zhao, Y.; Liu, Y.J. 2012: Numerical Simulation Study on High-Temperature Ventilated Cavitating Flow Considering the Compressibility of Gases. Advanced Materials Research 569: 395-399
Cai, Y.; Tu, B.; Yu, J.; Zhu, Y.; Zhou, J. 2018: Numerical Simulation Study on Lateral Displacement of Pile Foundation and Construction Process under Stacking Loads. Complexity 2018: 1-17
Sun, S.M.; Zhou, J.M. 2011: Numerical Simulation Study on Local Enhanced Heat Transfer for High Temperature Heat Pipe Heat Exchanger. Advanced Materials Research 396-398: 897-903
Shui, Y.; Yuanliang, M.; Guojuan, Z.; Wei, W.; Guohui, F. 2017: Numerical Simulation Study on Location Optimization of Indoor Air Purifiers in Bedroom. Procedia Engineering 205: 849-855
Chen, G.; Chen, B.; Li, P.; Bai, P.; Ji, C. 2015: Numerical Simulation Study on Propeller Slipstream Interference of High Altitude Long Endurance Unmanned Air Vehicle. Procedia Engineering 99: 361-367
Yao, C.; Yang, C.; Lan, Y.; Jiang, Q.; Jiang, S.; Yang, J. 2018: Numerical Simulation Study on Root Stones Loss in Dam Buttress Engineering. Mathematical Problems in Engineering 2018: 1-15
Zhang, Y.; Wang, Y. 2013: Numerical Simulation Study on Self-Settlement Process of High Embankment. Advanced Materials Research 671-674: 1221-1224
Yang, G.; Gao, Q.Y.; Gao, D.Q.; Liu, Y.C. 2011: Numerical Simulation Study on Size Effect of Dynamic Properties of Coarse Materials. Advanced Materials Research 368-373: 2749-2754
Xu, H.; Rao, X.B.; Huang, B.; Pan, J.J.; Chen, Y. 2011: Numerical Simulation Study on Slaking Deformation Properties of High Earth Core Dam. Advanced Materials Research 255-260: 3637-3641
Qiang, S.; Rongyi, M.; Juan, L.; Jiaxu, Z.; Chunming, Z.; Jianshe, C. 2012: Numerical Simulation Study on Sprinkler Control Effect in UBS Fuel Tank Room of Nuclear Power Plants. Procedia Engineering 43: 276-281
Zheng, Y.; Xiao, B.L.; Wu, W.M.; Yu, X.L.; Lu, G.D. 2012: Numerical Simulation Study on Thermal-Hydraulic Performances of Vehicular Radiator Heat Transfer Units. Advanced Materials Research 538-541: 2061-2066
Chen, G.Y.; Mei, L.F.; Zhang, B.; Zhu, D.J.; Chen, G.G. 2007: Numerical Simulation Study on Truing and Dressing of Bronze-Bonded Diamond Wheel with Pulsed Laser. Advances in Grinding and Abrasive Technology XIV: 166-170
Zhu, X.; Chen, Z.; Ren, Y. 2018: Numerical Simulation Study on the Anchorage Mechanism of Yield Supporting in Deep Tunnel. Geotechnical and Geological Engineering 37(3): 2091-2102
Chen, R.J.; Zhang, Y.; Wang, B. 2013: Numerical Simulation Study on the Cement-Based Absorbing Material. Advanced Materials Research 853: 169-173
Qi, H.P.; Li, Y.T.; Liu, Z.Q.; Du, S.W. 2010: Numerical Simulation Study on the Cold Rolling of Hollow Thread. Advanced Materials Research 160-162: 849-854
Zheng, W.T.; Zhang, D.Y.; Ye, G.X. 2013: Numerical Simulation Study on the Hydrodynamic Performance of two Blades of Canoes. Advanced Materials Research 680: 429-434
Li, Z.J.; Li, J.Q.; Yan, W.D. 2014: Numerical Simulation Study on the Key Influencing Factors of Water-Invasion Performance for the Gas Wells with Bottom-Water. Advanced Materials Research 884-885: 104-107
Huang, J.; Tang, T.; He, Y. 2021: Numerical Simulation Study on the Mass and Heat Transfer in the Self-Heating Membrane Distillation Process. Industrial-Engineering Chemistry Research 60(34): 12663-12674
Gao, B.; Wu, B.Z. 2010: Numerical Simulation Techniques for Hollow Vacuum Forming of Double-Layered Plastic Sheets. Advanced Materials Research 154-155: 68-73
Aleshin, V.; Kobyakov, V.; Seleznev, V. 2011: Numerical Simulation Technology for a Full Cycle of Steel Line Pipe Manufacturing Operations. Advanced Materials Research 217-218: 353-358
Xing, F.; Wanqing, W.; Wenfeng, W. 2011: Numerical Simulation Technology of Oil Containment by Boom. Procedia Environmental Sciences 8: 40-47
Hou, W.; Zhou, X.F.; Chen, X. 2012: Numerical Simulation Technology of the Steel Reinforced Concrete Special-Shaped Columns Using Ansys. Advanced Materials Research 466-467: 1232-1236
Adel, M.; Khader, M.M. 2017: Numerical Simulation Using GEM for the Optimization Problem as a System of FDEs. Applied Mathematics 08(12): 1761-1768
Chen, J.; Fang, Z.; Yuan, J. 2013: Numerical Simulation about Smoke Vent Arrangement Influence on Smoke Control in Double-decked Tunnel. Procedia Engineering 52: 48-55
Wang, Y.; Liu, Y. 2012: Numerical Simulation about Thermal Environment of Solar Energy Airship in Stratosphere. Procedia Engineering 29: 1745-1749
Li, Z.H.; Yang, Y.Q.; Yu, Y.Z.; Liu, G.P.; Li, X.C. 2014: Numerical Simulation and Analysis of Carbon Black in Pneumatic Conveying Pipe. Advanced Materials Research 1052: 561-566
Ding, X.; He, Y. 2012: Numerical Simulation and Analysis of Closed-Loop Driver/Articulated Vehicle Dynamic Systems. SAE International Journal of Commercial Vehicles 5(1): 111-118
Xu, S.H.; Cui, L.F.; Ning, L.; Wang, Z.Y. 2013: Numerical Simulation and Analysis of Critical Velocity in Tunnel Fires Based on FDS. Advanced Materials Research 831: 455-459
Shao, G.; Li, Y. 2020: Numerical Simulation and Analysis of Electromagnetic Fields Induced by a Moving Ship Based on a Three-Layer Geoelectric Model. Journal of Ocean University of China 19(6): 1299-1306
Wantha, W.; Flood, A.E. 2008: Numerical Simulation and Analysis of Flow in a Dtb Crystallizer. Chemical Engineering Communications 195(11): 1345-1370
Su, M.; Han, W.; Zhang, Z.; Li, R.; Li, Q.; Ma, W. 2012: Numerical Simulation and Analysis of Gas-Solid-Liquid Three-Phase Flow in Mechanical Flotation cell. Procedia Engineering 31: 850-856
Zhao, D.X.; Tang, Y.J.; Pei, Z.H. 2011: Numerical Simulation and Analysis of High-Strength Steel Autobody Panel Stamping. Advanced Materials Research 328-330: 730-733
Zhang, L.; Liu, H.; Wang, W. 2017: Numerical Simulation and Analysis of Hydromechanical Deep Drawing Process for Half-three-way Tube. Procedia Engineering 174: 524-529
An, Y.T.; Wang, Y.; Wang, J.G. 2011: Numerical Simulation and Analysis of Interior Flow Field in Control Valves under the Blocking Fault. Advanced Materials Research 317-319: 1452-1455
Dai, X.B.; Xu, J.P.; Zhang, L. 2013: Numerical Simulation and Analysis of Interior Shear Stress in Centrifugal Cardio Pump. Advanced Materials Research 732-733: 426-431
Huang, L.L.; Lu, X.Y.; Zhang, X.W. 2013: Numerical Simulation and Analysis of Ironing Process for Deep Cup Shaped Workpiece. Advanced Materials Research 681: 191-194
Chi, J.D.; Wang, Z.L.; Li, L.K. 2012: Numerical Simulation and Analysis of Low Hysteresis Brush Seals. Advanced Materials Research 452-453: 1455-1459
Li, Y.; Sun, X.; Su, G.; Wang, M.; Li, R. 2020: Numerical Simulation and Analysis of Multicomponent Induction Logging Response in Anisotropic Formation. IEEE Access 8: 149345-149361
Long-fei, H.; Ming, L.; Wu-yuan, C.; Yu-chen, L. 2011: Numerical Simulation and Analysis of On-building High-rise Building Fires. Procedia Engineering 11: 127-134
Fu, Y.; Peng, Y.; Yao, Y. 2012: Numerical Simulation and Analysis of Penetrating Concrete Slabs. Advanced Materials Research 446-449: 3833-3836
Kang, Z.Q.; Zhou, Y.F.; Wang, R.S. 2011: Numerical Simulation and Analysis of Rock under Hydraulic Fracturing Based on Acoustic Emission Monitoring. Advanced Materials Research 382: 458-461
Zhang, X.X.; Wang, B.S.; Lv, Z.Q. 2014: Numerical Simulation and Analysis of Slope Stability under Load. Advanced Materials Research 1065-1069: 147-150
Cheng, Q.; Shi, Y.; Zuo, L. 2019: Numerical Simulation and Analysis of Surface and Surrounding Rock Failure in Deep High-Dip Coal Seam Mining. Geotechnical and Geological Engineering 37(5): 4285-4299
Wu, Y.R.; Shen, H.G.; Fang, M.; He, J. 2011: Numerical Simulation and Analysis of Velocity Field in Folding-Type Air Filters. Advanced Materials Research 374-377: 1207-1211
Jia, Y.; Ainslie, M.D.; Hu, D.; Yuan, J. 2017: Numerical Simulation and Analysis of a Saturated-Core-Type Superconducting Fault Current Limiter. IEEE Transactions on Applied Superconductivity 27(4): 1-5
Luo, J.; Guo, W.; Zhu, M. 2005: Numerical Simulation and Analysis of a new Type of Complex Cavity for Gyrotron Applications. International Journal of Infrared and Millimeter Waves 26(12): 1703-1711
Ma, T.H.; Tang, C.A.; Xu, T.; Liang, Z.Z. 2006: Numerical Simulation and Analysis on Crack Path Deviation in Brittle Solid. Fracture and Damage Mechanics V: 931-934
Huang, Y.Y.; Zhang, L.; Chen, G.M.; Han, X.H. 2011: Numerical Simulation and Analysis on the Heat Transfer of the Vertical Ground Heat Exchanger in Hydrous Soil. Advanced Materials Research 280: 134-140
Zhao, J.; Yin, W.; Ding, G.; Yang, X.; Shi, W.; Zhang, X. 2008: Numerical Simulation and Analysis on the Hemodynamics of an Elastic Aneurysm. Journal of Hydrodynamics 20(2): 216-224
Jiang, Y.Z.; Wang, W.L.; Huang, X.F.; Fu, L.; Fan, Z.Q. 2013: Numerical Simulation and Analysis on the Impact Effect of Cylindrical Projectile Impacting Shelled Explosive. Advanced Materials Research 710: 320-324
Reine, M.; Pinkie, B.; Schuster, J.; Bellotti, E. 2014: Numerical Simulation and Analytical Modeling of in as n Bn Infrared Detectors with n-Type Barrier Layers. Journal of Electronic Materials 43(8): 2915-2934
Reine, M.; Schuster, J.; Pinkie, B.; Bellotti, E. 2013: Numerical Simulation and Analytical Modeling of in as n Bn Infrared Detectors with p-Type Barriers. Journal of Electronic Materials 42(11): 3015-3033
Catalano, A.P.; Scognamillo, C.; d'Alessandro, V.; Castellazzi, A. 2020: Numerical Simulation and Analytical Modeling of the Thermal Behavior of Single- and Double-Sided Cooled Power Modules. IEEE Transactions on Components, Packaging and Manufacturing Technology 10(9): 1446-1453
Jin, B.G.; Chen, M.; Wang, J.; Li, L.X.; Liu, C.; Wang, W.Z. 2010: Numerical Simulation and Application of Electromagnetic Stirring in Ansteel. Advanced Materials Research 97-101: 1061-1064
Wang, X.Q.; Liu, W.T.; Zhou, Z.G.; Zhang, Y.H. 2011: Numerical Simulation and Application of Pre-Stress Tubular Pile for the Foundation Pit Engineering. Advanced Materials Research 261-263: 985-988
Li, C.; Deng, S.; Li, Z.; Fan, Y.; Zhang, J.; Yang, J. 2022: Numerical Simulation and Application of Response Characteristics of High-Frequency Dielectric Logging Instrument. Progress In Electromagnetics Research M 107: 1-12
Tan, B.; Jiang, Y.G.; He, C.N.; Chang, J.; Luo, Y.Q. 2012: Numerical Simulation and Backfilling Materials Research on Coal Spontaneous Combustion of Thick Seam Large-Scale Top-Caving Region in Resources Conformity Coal Mine. Advanced Materials Research 524-527: 317-320
Wu, H.J.; Qiu, W.L. 2012: Numerical Simulation and Calculation Analysis of Suspension Bridge Anchorage System. Advanced Materials Research 446-449: 1042-1045
Huang, Z.; Dong, K.; Sun, Q.; Su, L.; Liu, T. 2017: Numerical Simulation and Comparative Analysis of Different Airflow Distributions in Data Centers. Procedia Engineering 205: 2378-2385
Kovaleva, I.; Kovalev, O.; Zaitsev, A.; Smurov, I. 2013: Numerical Simulation and Comparison of Powder Jet Profiles for Different Types of Coaxial Nozzles in Direct Material Deposition. Physics Procedia 41: 870-872
Cheng, Y.; Ying, B. 2007: Numerical Simulation and Comparison of Water Intake-Outlet Methods in Power Plants. Journal of Hydrodynamics 19(5): 623-629
Jianguo, D.; Chang, G.; Adu, D.; Darko, R.; Khan, M.A.S.; Antwi, E.O. 2021: Numerical Simulation and Computational Flow Characterization Analyses of Centrifugal Pump Operating as Turbine. Complexity 2021: 1-9
Zhang, W.; Liu, Y.; Zhang, M.Y. 2011: Numerical Simulation and Defects Analyses of Titanium Aluminide Based Alloys Powder Forging. Advanced Materials Research 337: 192-197
He, L.; Ren, Y.; Feng, Z.X.; Han, Z.W. 2014: Numerical Simulation and Design Optimization Research of Slope Ratio and Platforms Influence on a High Rock Cut Slope Engineering Stability. Advanced Materials Research 1065-1069: 151-158
Venkatadri, K.; Bég, O.A.; Rajarajeswari, P.; Prasad, V.R.; Subbarao, A.; Khan, B.M.H. 2020: Numerical Simulation and Energy Flux Vector Visualization of Radiative-Convection Heat Transfer in a Porous Triangular Enclosure. Journal of Porous Media 23(12): 1187-1199
Nan, F.; Kang, Z.Q.; Li, F.P. 2011: Numerical Simulation and Engineering Application of Bolt's Supporting in Tectonic Stress Field. Advanced Materials Research 383-390: 7691-7696
Shi, Y.; Wang, P.; Liu, R.; Tan, X.; Zhang, W. 2019: Numerical Simulation and Engineering Application of Coalbed Water Injection. Mathematical Problems in Engineering 2019: 1-12
Liu, Z.; Cao, A.; Zhu, G.; Wang, C. 2017: Numerical Simulation and Engineering Practice for Optimal Parameters of Deep-Hole Blasting in Sidewalls of Roadway. Arabian Journal for Science and Engineering 42(9): 3809-3818
Mohammadi, V.; Mirzaei, D.; Dehghan, M. 2018: Numerical Simulation and Error Estimation of the Time-Dependent Allen–Cahn Equation on Surfaces with Radial Basis Functions. Journal of Scientific Computing 79(1): 493-516
Sarraf Shirazi, A.; Karimipour, S.; Gupta, R. 2013: Numerical Simulation and Evaluation of Cavity Growth in in Situ Coal Gasification. Industrial-Engineering Chemistry Research 52(33): 11712-11722
Di, W.; Yong, Z.; Yuan-sheng, P. 2010: Numerical Simulation and Evaluation of Regional Climate Change in Southwest China by a Regional Climate Model. Procedia Environmental Sciences 2: 1540-1554
Du, F.; Liu, S.; Chen, Q.; Li, N.; Dou, Y.; Yang, X.; Wang, Z.; Zhang, X.; Shen, B.; Li, Y. 2018: Numerical Simulation and Evaluation of a Four-Channel-by-Four-Channel Double-Nuclear RF Coil for 1H MRi and 31P MRSi at 7 T. IEEE Transactions on Magnetics 54(11): 1-5
Luo, Z.Z.; Pan, Y.S. 2012: Numerical Simulation and Experiment Analysis of MIG Welding for Aluminum Alloy Extrusion. Advanced Materials Research 430-432: 1311-1314
Gao, F.; Zhong, W.Y. 2012: Numerical Simulation and Experiment Research of the Whole Flow Field inside a Multi-Blade Centrifugal Fan. Advanced Materials Research 468-471: 2255-2258
Zhang, Y.C.; Chen, Q.G.; Zhang, Y.J.; Jia, X.X. 2011: Numerical Simulation and Experiment Research on Aerodynamic Characteristics of a Multi-Blade Centrifugal Fan. Advanced Materials Research 317-319: 2157-2161
Liu, J.; Pei, Q. 2013: Numerical Simulation and Experiment Study of Indoors Thermal Environment in Summer Air-Conditioned Room. Procedia Engineering 52: 230-235
Hong-wei, L.; Jing-jiang, L.; Jing, L.; Hai-bo, H.; Li, N. 2012: Numerical Simulation and Experiment Study on Efficiency of Inertia Separator. Procedia Engineering 29: 3227-3233
Cao, Z.; Qin, Q. 2011: Numerical Simulation and Experiment for Driving Interference-Fit Fastener Process with Stress Wave Method. Recent Patents on Space Technology 1(1): 39-45
Pi, W.; Meng, Y.; Liu, Z.; Ma, S.; Wang, T.; Shi, Q.; Dong, J.; Wang, Y. 2020: Numerical Simulation and Experiment of AC Loss in Quasi-Isotropic Superconducting Strand. IEEE Transactions on Applied Superconductivity 30(4): 1-5
Chen, L. 2010: Numerical Simulation and Experiment of Aluminum Sheet Metal Springback in new Quenching State. Advanced Materials Research 97-101: 2567-2570
Nakamura, O.; Morita, N.; Okazaki, K. 1995: Numerical Simulation and Experiment of Propagation and Focussing Process of Ultrasonic Pulses in Biological Tissues. Japanese Journal of Radiological Technology 51(2): 131-140
Lu, S.; Qi, F.; Chen, J.; Jia, X. 2012: Numerical Simulation and Experiment of Temperature Field on Mg Alloy Weld Processed by Friction-Stir Welding. Journal of Computational and Theoretical Nanoscience 9(9): 1231-1235
Liu, G.Y.; Zhu, D.M.; Zhang, S.J.; Gong, S.C. 2012: Numerical Simulation and Experiment on Quenching Process of 718 Mould Steel with new Online Hardening Equipment. Advanced Materials Research 572: 237-242
Chen, J.Q.; Wang, B.G.; Lv, H.L. 2011: Numerical Simulation and Experiment on the Electrolyte Flow Distribution for all Vanadium Redox Flow Battery. Advanced Materials Research 236-238: 604-607
Li, M.; Wang, G.; Wang, L.; Pan, R.; Sun, D.; Yan, P. 2013: Numerical Simulation and Experiment on the Sliding Electrical Contact of the Solid Armature and Rails Interface. IEEE Transactions on Plasma Science 41(12): 3645-3650
Ba, D.T.; Anh, N.D.; Van Ngoc, P. 2015: Numerical Simulation and Experimental Analysis for a Linear Trigonal Double-Face Permanent Magnet Generator Used in Direct Driven Wave Energy Conversion. Procedia Chemistry 14: 130-137
Cheung, N.; Larosa, M.; Osório, W.R.; Lerardi, M.C.F.; Garcia, A. 2008: Numerical Simulation and Experimental Analysis of Laser Surface Remelting of AISi 420 Stainless Steel Samples. Advanced Materials Research 59: 265-268
Cheung, N.; Larosa, M.; Osório, W.R.; Lerardi, M.C.F.; Garcia, A. 2008: Numerical Simulation and Experimental Analysis of Laser Surface Remelting of AISi 420 Stainless Steel Samples. Advanced Materials Research: 265-268
Ji, D.; Luo, Y.; Ren, H.; Wei, D.; Shao, J. 2019: Numerical Simulation and Experimental Analysis of Microstructure of Magnetorheological Fluid. Journal of Nanomaterials 2019: 1-17
Huang, Z.; Fan, K.; Yao, Q.; Lai, J. 2011: Numerical Simulation and Experimental Analysis of Riveting with Pipe Rivet. Advanced Science Letters 4(3): 686-690
Li, T.; Wen, B.; Tian, Y.; Li, Z.; Wang, S. 2019: Numerical Simulation and Experimental Analysis of Small Drone Rotor Blade Polarimetry Based on RCS and Micro-Doppler Signature. IEEE Antennas and Wireless Propagation Letters 18(1): 187-191
Huang, Z.; Deng, Z.; Jin, L.; Hong, Y.; Zheng, J.; Rodriguez, E.F. 2019: Numerical Simulation and Experimental Analysis on the AC Losses of HTS Bulks Levitating Under a Varying External Magnetic Field. IEEE Transactions on Applied Superconductivity 29(5): 1-5
Nicolai, M.; Zanuccoli, M.; Paternoster, G.; de Ceglia, G.; Ferrario, L.; Bellutti, P.; Sangiorgi, E.; Fiegna, C. 2016: Numerical Simulation and Experimental Characterization of Emitter Wrap through Solar Cells with Deep Grooved Base Contact (EWT-DGB). Energy Procedia 92: 160-169
White, D.M.; Taylor, E.A.; Clegg, R.A. 2003: Numerical Simulation and Experimental Charcterisation of Direct Hypervelocity Impact on a Spacecraft Hybrid Carbon Fibre/Kevlar Composite Structure. International Journal of Impact Engineering 29(1-10): 779-790
Velisala, V.; Srinivasulu, G.N. 2017: Numerical Simulation and Experimental Comparison of Single, Double and Triple Serpentine Flow Channel Configuration on Performance of a PEM Fuel Cell. Arabian Journal for Science and Engineering 43(3): 1225-1234
Sahoo, D.; Mane, J.; Srivastava, P.; Kohli, A.; Ganesh, G. 2017: Numerical Simulation and Experimental Drop Testing of Cocam-120-an Industrial Radiography Device. Procedia Engineering 173: 1918-1925
Purmohamad, H.; Kermanpur, A.; Shamanian, M. 2009: Numerical Simulation and Experimental Investigation of Residual Stresses in the Circumferential Butt GTAW of Incoloy 800H Pipes. Journal of Materials Engineering and Performance 19(1): 13-21
Yang, K.; Bai, Q.S.; Liang, Y.C. 2010: Numerical Simulation and Experimental Investigation of Tool Edge Radius Effect on Micro-Cutter Wear in Micro-End-Milling Process. Advanced Materials Research 97-101: 2542-2545
Chen, L.; Liu, K.; Han, P.; Feng, L.; Liu, G. 2019: Numerical Simulation and Experimental Investigation on Inclusion-Argon-Liquid Steel Phenomenon in RH Refining of High-Manganese and High-Aluminum Steel. Mathematical Problems in Engineering 2019: 1-9
Ding, Z.Y.; Zhang, Z.Y.; Fu, J. 2014: Numerical Simulation and Experimental Research of Blade Erosion in Particulate Gas Turbine. Advanced Materials Research 1006-1007: 188-192
Chen, G.S.; Zhang, R.Y.; Li, F.; Li, S.D.; Zhang, L. 2010: Numerical Simulation and Experimental Research of Heat Charging Process of Cylindrical Units with PCM of Al-Si Alloy. Advanced Materials Research 171-172: 223-228
Wen, J.; He, J.; Liu, Y. 2019: Numerical Simulation and Experimental Research of the Aluminum Alloy Rolling Edge Crack at Room Temperature. Procedia Manufacturing 37: 153-158
Xie, Y.; Li, X.; Wang, L.; Yu, H.; Bai, B.; Xu, Z.; Zhu, T. 2014: Numerical Simulation and Experimental Research on Coal Ash Collecting and Grading System. Mathematical Problems in Engineering 2014: 1-12
Li, J.G.; Wang, X.G.; Gao, Z.L. 2010: Numerical Simulation and Experimental Research on Fatigue Strength of the Injector Guide Pillar under Complex Loads. Advanced Materials Research 118-120: 196-200
Zhao, G.J.; Luo, Q.; Wang, X.J.; Luo, J. 2010: Numerical Simulation and Experimental Research on MAG Surfacing Deposited with Electro-Magnetic Stirring Controlling. Advanced Materials Research 102-104: 407-411
Han, X.H.; Hua, L.; Lan, J. 2007: Numerical Simulation and Experimental Research on Rolling Process of Conical Ring with Inner Steps. Advanced Materials Research 26-28: 993-997
Han, X.H.; Hua, L.; Lan, J. 2007: Numerical Simulation and Experimental Research on Rolling Process of Conical Ring with Inner Steps. Advanced Materials Research: 993-997
Wang, Z.Y.; Han, J.; Yang, X.; Sun, T. 2011: Numerical Simulation and Experimental Research on a Splash-Proof Water Injector. Advanced Materials Research 291-294: 2866-2870
Yi, C.W.; Zhao, Y.Q.; Yi, R.J.; Yin, T. 2012: Numerical Simulation and Experimental Studies for High Gas Velocity Electrostatic Precipitator. Advanced Materials Research 472-475: 2129-2132
Liu, H.; Wan, D.; Hu, D. 2008: Numerical Simulation and Experimental Studies of Surface Topography of Laser Textured Roller. Journal of Computational and Theoretical Nanoscience 5(8): 1570-1573
Wang, J.; Jiang, W.; Wang, Q. 2019: Numerical Simulation and Experimental Studies on Elastic-Plastic Fatigue Crack Growth. Computer Modeling in Engineering-Sciences 118(2): 377-395
Ren, G.C.; Zhao, G.Q.; Xu, S.B. 2010: Numerical Simulation and Experimental Study of AZ31 Magnesium Alloy Deformation Behavior in ECAP. Advanced Materials Research 148-149: 227-231
Zheng, C.; Liang, H.; You, S.; Zheng, W.; Liu, Z. 2017: Numerical Simulation and Experimental Study of Comfort Air Conditioning Influenced by Bottom-supply and Stratum Ventilation Modes. Energy Procedia 105: 3609-3615
Zhang, N.; Zheng, S.; Liu, Z. 2017: Numerical Simulation and Experimental Study of Crack Propagation of Polydimethylsiloxane. Procedia Engineering 214: 59-68
Shi, W.; Zhou, L.; Lu, W.; Xu, L.; Li, W. 2013: Numerical Simulation and Experimental Study of Different Stages Deep-Well Centrifugal Pump. Journal of Computational and Theoretical Nanoscience 10(12): 2897-2901
Zhang, D.; Luo, Y.; Li, X.; Chen, H. 2011: Numerical Simulation and Experimental Study of Drag-Reducing Surface of a Real Shark Skin. Journal of Hydrodynamics 23(2): 204-211
Peng, J.Q.; Song, D.L.; Li, L.C. 2012: Numerical Simulation and Experimental Study of Jet Distance in Abrasive Waterjet Polishing. Advanced Materials Research 472-475: 2037-2042
Chen, J.P.; Qian, J.Q.; Li, S.Z. 2011: Numerical Simulation and Experimental Study of Limit Drawing Ratio of Steel Sheets. Advanced Materials Research 189-193: 2539-2542
Kovshov, Y.S.; Ponomarenko, S.S.; Kishko, S.A.; Khutoryan, E.M.; Kuleshov, A.N. 2018: Numerical Simulation and Experimental Study of Sub-THz and THz CW Clinotron Oscillators. IEEE Transactions on Electron Devices 65(6): 2177-2182
Gao, R.; Fang, Z.; Li, A.; Liu, K.; Yang, Z.; Cong, B. 2017: Numerical Simulation and Experimental Study of the Drag Reduction of 90° Elbows for Ventilation and Air Conditioning Tubes in An Arc Form. Procedia Engineering 205: 3978-3984
Xu, Y.; Musser, J.; Li, T.; Gopalan, B.; Panday, R.; Tucker, J.; Breault, G.; Clarke, M.A.; Rogers, W.A. 2018: Numerical Simulation and Experimental Study of the Gas–Solid Flow Behavior Inside a Full-Loop Circulating Fluidized Bed: Evaluation of Different Drag Models. Industrial-Engineering Chemistry Research 57(2): 740-750
Zhao, B. 2013: Numerical Simulation and Experimental Study of the Polypropylene Polymer Air Drawing Model and Air Jet Flow Field Model in the Spunbonding Nonwoven Process. Industrial-Engineering Chemistry Research 52(32): 11061-11069
Xu, P.; Liu, J.; Xiang, Y.; Lei, Q.; Zhou, J.; Cen, K. 2014: Numerical Simulation and Experimental Study of the Tube Receiver's Performance of Solar Thermal Power Tower. Energy Procedia 61: 1618-1621
Liu, Z.; Xiong, Y.; Wang, Z.; Wang, S.; Tu, C. 2010: Numerical Simulation and Experimental Study of the new Method of Horseshoe Vortex Control. Journal of Hydrodynamics 22(4): 572-581
Ma, J.H.; Zhang, W.Z. 2009: Numerical Simulation and Experimental Study on Corrugated Waist Rail with Universal Rolling. Advanced Materials Research 83-86: 222-229
Shi, W.D.; Zhou, L.; Lu, W.G.; Li, H. 2011: Numerical Simulation and Experimental Study on Deep-Well Centrifugal Pump with Small Rear Shroud Diameter. Advanced Materials Research 354-355: 659-663
Yang, X.; Fu, Y.; Kuang, X. 2021: Numerical Simulation and Experimental Study on Flow Forming of Laser Concave–Convex Microtexture of Cr12 Steel Surface. Metals and Materials International 27(10): 4225-4234
Liu, Y.; Yang, H.X.; Lv, J.; Ren, S.F. 2014: Numerical Simulation and Experimental Study on Heat Pipe PV/T System. Advanced Materials Research 997: 758-761
Li, Z.; Li, S.; Wang, X.; Li, D. 2021: Numerical Simulation and Experimental Study on Magnetorheological Fluid Seals with Flexible Pole Pieces. IEEE Transactions on Magnetics 57(10): 1-7
Liu, Z.B.; Tang, J.; Wang, H.; Mao, J. 2013: Numerical Simulation and Experimental Study on Oil-Water Separation of Fiber Bundle Filter. Advanced Materials Research 834-836: 1699-1704
Chan, L.C.; Kong, T.F. 2013: Numerical Simulation and Experimental Study on Profile-Rolling Process for Micro-Teeth Components. Advanced Materials Research 677: 252-255
Du, J.; Wei, Z.; Tang, Y. 2012: Numerical Simulation and Experimental Study on Resist Filling Behavior in UV-nanoimprint Lithography. Procedia CIRP 3: 203-208
Qing, D.F.; Zhu, M.K.; Luo, Y.C.; Zhang, Y.L.; Chen, A.R.; Yang, L. 2015: Numerical Simulation and Experimental Study on Tar Decomposition of Low-Pressure Ejection Type Burner. Advanced Materials Research 1092-1093: 200-206
Xiaohan, J.; Qingqing, Z.; Jianmei, F.; Xueyuan, P. 2016: Numerical Simulation and Experimental Study on Temperature Distribution of Self-Lubricating Packing Rings in Reciprocating Compressors. Mathematical Problems in Engineering 2016: 1-14
Ji, A M.; Niu, X.C.; Tang, B.N.; Li, F.L. 2014: Numerical Simulation and Experimental Study on Thawing time of Cylindrical Frozen Food. Advanced Materials Research 989-994: 3513-3517
Tong, Y. 2011: Numerical Simulation and Experimental Study on Warm Forging Process of Half Axle Bevel Gear. Advanced Materials Research 291-294: 774-777
Xie, Z.W. 2014: Numerical Simulation and Experimental Study on Water Mist Fire Suppression for Cooking Fog Discharge Pipe. Advanced Materials Research 915-916: 356-361
Hu, X.L.; Zhao, H.; Xing, Z.W. 2010: Numerical Simulation and Experimental Study on the Weld-Line Movement of Tailor-Welded Blank. Advanced Materials Research 97-101: 357-360
Hussain, M.N.; Janajreh, I. 2017: Numerical Simulation and Experimental Testing of Novel Sonochemical Reactor for Transesterification. Waste and Biomass Valorization 8(5): 1733-1747
Zhou, B.; Xu, Y.; Fan, J.; Chen, L.; Li, F.; Xue, K. 2017: Numerical Simulation and Experimental Validation for the Filtration Performance of Fibrous Air Filter Media with LB Method. Aerosol and Air Quality Research 17(11): 2645-2658
Pei, Y.Y.; Xu, Y.; Sun, Y.Z.; Gao, D.Y.; Ding, W.P. 2014: Numerical Simulation and Experimental Validation of Bound Solute Dialysis in Artificial Liver Support Systems. Advanced Materials Research 971-973: 107-110
Smolka, J.; Bíró, O.; Nowak, A.J. 2009: Numerical Simulation and Experimental Validation of Coupled Flow, Heat Transfer and Electromagnetic Problems in Electrical Transformers. Archives of Computational Methods in Engineering 16(3): 319-355
Bodepati, V.; Mogulanna, K.; Rao, G.S.; Vemuri, M. 2017: Numerical Simulation and Experimental Validation of E-Glass/epoxy Composite Material under Ballistic Impact of 9 mm Soft Projectile. Procedia Engineering 173: 740-746
Pawar, M.J.; Patnaik, A.; Nagar, R. 2016: Numerical Simulation and Experimental Validation of Granite Powder Filled Jute Epoxy Composite for Slurry Jet Erosive Wear. International Polymer Processing 31(1): 37-50
Dayem, A.A.; Metwally, M.N.; Alghamdi, A.; Marzouk, E. 2014: Numerical Simulation and Experimental Validation of Integrated Solar Combined Power Plant. Energy Procedia 50: 290-305
Bonazzi, E.; Colombini, E.; Panari, D.; Vergnano, A.; Leali, F.; Veronesi, P. 2016: Numerical Simulation and Experimental Validation of MIG Welding of T-Joints of Thin Aluminum Plates for Top Class Vehicles. Metallurgical and Materials Transactions A 48(1): 379-388
Xiao, B.; Li, K.; Wang, Q.; Rong, Y. 2011: Numerical Simulation and Experimental Validation of Residual Stresses in Water-Quenched Aluminum Alloy Castings. Journal of Materials Engineering and Performance 20(9): 1648-1657
Xu, Y.; Tang, Y.; Ren, L.; Dai, Q.; Xu, C.; Wang, Z.; Shi, J.; Li, J.; Liang, S.; Yan, S. 2016: Numerical Simulation and Experimental Validation of a Cooling Process in a 150-k J SMES Magnet. IEEE Transactions on Applied Superconductivity 26(6): 1-7
Chen, Z.; Cui, Y. 2020: Numerical Simulation and Experimental Validation of a Flux Switching Permanent Magnet Memory Machine. IEEE Access 8: 194904-194911
Gao, Y.K.; Gao, Y.; Yu, Y.; Lin, X.X. 2013: Numerical Simulation and Experimental Validation of a Vertical U-Tube Ground Heat Exchanger. Advanced Materials Research 860-863: 709-714
Ma, W. 2019: Numerical Simulation and Experimental Validation of the Erosion Behaviour of X65 Pipeline Steel under Different Flow Velocities and Sand Concentrations. International Journal of Electrochemical Science: 2560-2573
Wang, B.P.; Dong, W.; Guo, M.C.; Yuan, Z.D. 2012: Numerical Simulation and Experimental Validation of the Four Channel Hot Air Gun Heating System. Advanced Materials Research 550-553: 2986-2991
Zhang, Y.; Ding, G.; Cheng, P.; Wang, H. 2014: Numerical Simulation and Experimental Verification of Additive Distribution in Through-Silicon Via during Copper Filling Process. Journal of The Electrochemical Society 162(1): D62-D67
Hao, L.; Wang, T.; Fu, K.; Zhao, Z.; Chen, Y.; Sun, M.; Dong, B.; Guo, Z. 2021: Numerical Simulation and Experimental Verification of Disc Cutter Rings in die Forging Process. Science of Advanced Materials 13(1): 131-139
Wang, Y.; Chen, S.; Lin, Q.; Zhang, X.; Chen, W. 2020: Numerical Simulation and Experimental Verification of the Film-Forming Behavior of Falling Film Flow down Clamped Channels with High-Viscosity Fluid. Industrial-Engineering Chemistry Research 59(44): 19698-19711
Huimin, L.; Xuezhi, Z.; Haiping, C.; Shunxiang, H.; Feng, L.; Gang, W. 2012: Numerical Simulation and Field Experiment Validation of Atmopheric Pollution Chemical Accidents Based on Canopy Model. Procedia Environmental Sciences 12: 30-37
Yu, J.Y.; Liu, L.J.; Lin, W.; Liu, Q.; Yang, W.H.; Nie, S.H.; Chen, Y.W. 2012: Numerical Simulation and Field Synergy Analysis of Flow and Heat Transfer in a Vibratory Tube. Advanced Materials Research 516-517: 949-953
Jiang, D.Y.; Guo, W.; Zheng, Y.K. 2011: Numerical Simulation and Field Test of Broken Zone in Geologic Unsymmetrically Loaded Tunnel. Advanced Materials Research 250-253: 2120-2123
Iaccarino, S.; Breda, S.; D'Adamo, A.; Fontanesi, S.; Irimescu, A.; Merola, S. 2017: Numerical Simulation and Flame Analysis of Combustion and Knock in a DISi Optically Accessible Research Engine. SAE International Journal of Engines 10(2): 576-592
Liao, J.; Gao, L.; Wang, X. 2014: Numerical Simulation and Forecasting of Water Level for Qinghai Lake Using Multi-Altimeter Data Between 2002 and 2012. IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing 7(2): 609-622
Zhou, S.P.; Lv, P.W.; Ding, X.X.; Su, Y.S.; Chen, D.Q. 2012: Numerical Simulation and Impeller Optimization of a Centrifugal Pump. Advanced Materials Research 472-475: 2195-2198
Zhang, R.H. 2012: Numerical Simulation and Influencing Factors Analysis of the Leakage and infiltration diffusion for Fuel Underground Storage Tank. Advanced Materials Research 524-527: 1826-1834
Jia, L.; Zou, Y.; Zou, Z.D. 2012: Numerical Simulation and Infrared Measurement of Welding Temperature Field for T-Joint. Advanced Materials Research 548: 686-690
Song, X.; Xie, Z. 2011: Numerical Simulation and Inversive Study of Gas Flow Field Around Coal Bed Borehole. Procedia Engineering 26: 1234-1239
Huang, Q.B.; Yang, Q.B.; Ji, X.A. 2012: Numerical Simulation and Mechanical Analysis of Special-Channel Steel Sheet on Cold Roll Forming Process. Advanced Materials Research 538-541: 1080-1083
Zhang, Y.; Sun, Y.; Ding, G.; Wang, Y.; Wang, H.; Cheng, P. 2015: Numerical Simulation and Mechanism Analysis of Through-Silicon Via (TSV) Filling Using an Arbitrary Lagrange-Eulerian (ALE) Method. Journal of The Electrochemical Society 162(10): D540-D549
Yang, X.L.; Liu, J.F.; Zou, J.C. 2011: Numerical Simulation and Mechanism Study of two Level Partial Blocks Vibration Motor. Advanced Materials Research 396-398: 2463-2466
Magnone, P.; Tonini, D.; De Rose, R.; Frei, M.; Crupi, F.; Sangiorgi, E.; Fiegna, C. 2013: Numerical Simulation and Modeling of Resistive and Recombination Losses in MWT Solar Cells. IEEE Journal of Photovoltaics 3(4): 1215-1221
Duan, L.L.; He, G.J.; Yi, J.; Li, Y.F. 2013: Numerical Simulation and Monitoring Analysis for High-Fill Slope. Advanced Materials Research 639-640: 274-278
Wang, Y.; Pang, E.B.; Zhang, H.C.; Yang, L. 2013: Numerical Simulation and Monitoring of Mass Concrete Wall Temperature Field. Advanced Materials Research 683: 262-265
He, X.C.; Hu, Y.B.; Xing, B.Y.; Ding, Y.F.; Zeng, K. 2012: Numerical Simulation and Online Window Monitoring of SPR Process. Advanced Materials Research 602-604: 1765-1768
Johnson, J.L. 1991: Numerical Simulation and Optimal Control in Plasma Physics: with Applications to Tokamaks (Jacques Blum). SIAM Review 33(1): 147-150
Wan, Z.M.; Zheng, Z.Y.; Chen, H.X.; Liu, J.; Jin, T.X. 2011: Numerical Simulation and Optimal Design Investigation on Air Duct of Floor Standing Air-Conditioner. Advanced Materials Research 308-310: 563-567
Hu, A.F.; Li, C.X. 2012: Numerical Simulation and Optimal Design of a Continous Casting Tundish. Advanced Materials Research 524-527: 2017-2020
Sun, W.B. 2011: Numerical Simulation and Optimal Design of a Novel Actuator Made of the Orthotropic Piezoelectric Composite Material. Advanced Materials Research 216: 21-24
Lianqing, X.; Zhenchun, H.; Xiaoqun, L.; Yongkun, L. 2012: Numerical Simulation and Optimal System Scheduling on Flood Diversion and Storage in Dongting Basin, China. Procedia Environmental Sciences 12: 1089-1096
Chen, Y.; Liang, X.T.; Zeng, J.H.; Chen, J.; Liu, R.D. 2011: Numerical Simulation and Optimization Practice of Oxygen Lance for Converter Steelmaking. Advanced Materials Research 402: 156-159
Chen, H.Z.; Dong, H.Z.; Shan, Z.D. 2014: Numerical Simulation and Optimization Technology of Lost Foam Casting. Advanced Materials Research 936: 1681-1686
Zhang, Y.; Jia, G.R.; Xie, X.J.; Xie, S.S.; He, J.Y.; Li, D.F.; Sun, W.S.; Geng, M.P. 2011: Numerical Simulation and Optimization in Solidification of Zinc Alloy. Advanced Materials Research 287-290: 2902-2905
Li, W.Y.; Kong, Y.; Tan, L.; Sun, Z.X. 2014: Numerical Simulation and Optimization of "Non-Catalytic Reduction" Process for Circulating Fluidized Bed Boiler Based on Properties of Materials. Advanced Materials Research 886: 45-50
Du, Z.H.; Liu, C.H.; Zhou, G. 2014: Numerical Simulation and Optimization of Air Distribution in Large Space. Advanced Materials Research 1070-1072: 2021-2026
Taouririt, T.E.; Meftah, A.; Sengouga, N. 2018: Numerical Simulation and Optimization of An a-ITZO TFT Based on a Bi-Layer Gate Dielectrics. Journal of Electronic Materials 48(2): 1018-1030
Ding, H.Y.; Xia, M.J.; Zhang, Y.; Zhou, G.H. 2011: Numerical Simulation and Optimization of Drawing for Shallow Tapered Surface. Advanced Materials Research 291-294: 682-686
Gao, Y.; Liu, Q.; Bian, L. 2012: Numerical Simulation and Optimization of Flow Field in the SCR Denitrification System on a 600 MW Capacity Units. Energy Procedia 14: 370-375
Fu, P.; Zhang, J.; Xing, Z.; Yang, X. 2013: Numerical Simulation and Optimization of Hole Spacing for Cement Grouting in Rocks. Journal of Applied Mathematics 2013: 1-9
Liu, Q.Y.; Tu, F.B.; Gao, S.Y. 2013: Numerical Simulation and Optimization of Radial Heat Pipe Heat Exchanger Based on Field Synergy Principle. Advanced Materials Research 834-836: 1418-1422
Zhang, M.; Zhao, J.; Zou, L.L.; Wang, G. 2013: Numerical Simulation and Optimization of Steel Pipe Cathodic Protection under the Condition of 3.5% Brine. Advanced Materials Research 690-693: 2751-2756
Wang, D.C.; Li, M. 2013: Numerical Simulation and Optimization of Urea-SCR Catalyst for Diesel Engine. Advanced Materials Research 724-725: 1163-1170
Hong, W.P.; Ding, H.S.; Huang, Y. 2013: Numerical Simulation and Optimization of the Flow Field in the SCR System. Advanced Materials Research 860-863: 1464-1469
Shi, Y.X.; Shen, Y.L.; Pan, W.H.; Liu, J.P. 2012: Numerical Simulation and Optimization of the YKK355-4 Motor Shaft Welding Structure. Advanced Materials Research 442: 134-138
Mi, G.F.; Chen, L.L.; Nan, H.Y.; Wang, H.Y. 2011: Numerical Simulation and Optimization on Casting Hoisting Sheave. Advanced Materials Research 225-226: 92-96
He, B.F.; Mi, G.F.; He, S.S. 2010: Numerical Simulation and Optimization on Casting Technique of HT200 Flywheel. Advanced Materials Research 97-101: 2553-2557
Huang, H.; Deng, Z.; Zhang, X.; Cheng, Y.; Hong, Y.; Li, H. 2021: Numerical Simulation and Parameter Identification of Dynamic Levitation Force of HTS Pinning Maglev for Engineering Application. Journal of Superconductivity and Novel Magnetism 34(11): 2753-2760
Long, A.; Ge, R.; Zhang, Y.S.; Pan, L.B. 2011: Numerical Simulation and Parameter Optimization of Cam's Fine Blanking Process. Advanced Materials Research 396-398: 134-139
Lu, Z.; Wei, Z.; Xu, Y.; Wang, H. 2016: Numerical Simulation and Parameter Optimization of the Air Curtain Dust-Collecting System. Journal of Computational and Theoretical Nanoscience 13(10): 6463-6467
Kang, W.; Zhao, Y.; Yu, W.; Wang, S.; Ma, Y.; Yan, P. 2014: Numerical Simulation and Parameters Analysis for Roll Forming of Martensitic Steel MS980. Procedia Engineering 81: 251-256
Kumar, M.; Khanna, S.; Gupta, N.; Gupta, R.; Sharma, S.C. 2019: Numerical Simulation and Parametric Study of Carbon Deposition During Graphene Growth in PECVD System. IEEE Transactions on Nanotechnology 18: 401-411
Yin, X.B.; Li, X.P.; Li, S. 2011: Numerical Simulation and Performance Optimization of the Gain Characteristic of EY-CDWA Optical Waveguide Amplifier. Advanced Materials Research 345: 35-40
Zhang, Q.; Liu, R.F.; Liu, H.; Wang, R.W. 2012: Numerical Simulation and Performance Study of Adjustable Steam Ejector Using CFD. Advanced Materials Research 562-564: 1150-1154
Zhang, Q.; Huo, J.; Liu, R.; Wang, R. 2011: Numerical Simulation and Performance Study of Steam Ejector Using CFD. Advanced Science Letters 4(6): 2276-2280
Li, B.; Wang, H. 2012: Numerical Simulation and Prediction of Cutting Force in Turning of Titanium Alloy. Advanced Materials Research 580: 63-66
Sathish, S.; Elango, L. 2015: Numerical Simulation and Prediction of Groundwater Flow in a Coastal Aquifer of Southern India. Journal of Water Resource and Protection 07(17): 1483-1494
An, Y.H.; Han, S.B.; Wu, X.; Cheng, X.X.; Liu, W.P. 2012: Numerical Simulation and Prediction of High Fluorine Groundwater Transport in Zhangye Basin. Advanced Materials Research 466-467: 36-41
Yan, J.W.; Fan, Y.F.; Yoshihara, N.; Kuriyagawa, T.; Yokoyama, S. 2007: Numerical Simulation and Prediction of Surface Heterogeneity in Diamond Turning of Single-Crystalline Germanium. Advances in Abrasive Technology IX: 397-402
Zhou, J.H.; Liu, L.G.; He, X.M. 2014: Numerical Simulation and Process Analysis for Injection Forming about the Thin-Wall Conical Centrifugal Disc. Advanced Materials Research 941-944: 2298-2304
Cai, G.W.; Xu, X.Y.; Zheng, Z.G.; Zhang, Z.; Wu, D.C. 2011: Numerical Simulation and Process Optimization for Multi-Stage Forming of Wheel Centre Disc. Advanced Materials Research 189-193: 2770-2774
Lu, H.F.; Chen, R.F.; Zhao, Y.H.; Wu, L.; Li, Z.L.; Yang, H. 2013: Numerical Simulation and Process Optimization of Aluminum Alloy Connecting Rod Based on Pro CAST. Advanced Materials Research 712-715: 549-552
Sönmez, D.; Eker, A.A. 2021: Numerical Simulation and Process Optimization of a 3D Thin-Walled Polymeric Part Using Injection Compression Molding. International Polymer Processing 36(4): 459-467
Zhang, Y.; An, Z.G.; Li, L. 2011: Numerical Simulation and Process Optimization of the die Forging for the Center Wedge of the Railway Freight Car Buffers. Advanced Materials Research 228-229: 412-415
Meng, B.; Wu, H.W.; Bao, G.J.; Li, H.; Yang, Q.H. 2010: Numerical Simulation and Process Test for Cold Extrusion of Wheel Hub Bearing Rings. Advanced Materials Research 97-101: 100-106
Ma, D.M.; Zhang, H.P.; Wei, W.Q.; Hao, C.X.; Fang, F. 2014: Numerical Simulation and Rational use of Groundwater in Beijing Daxing. Advanced Materials Research 955-959: 3116-3119
Ghoreyshi, M.; Young, M.E.; Lofthouse, A.J.; Jirásek, A.; Cummings, R.M. 2018: Numerical Simulation and Reduced-Order Aerodynamic Modeling of a Lambda Wing Configuration. Journal of Aircraft 55(2): 549-570
Zhang, S.H.; Wan, M.W. 2012: Numerical Simulation and Research of Far Infrared Sterilization Tunnel. Advanced Materials Research 503-504: 798-801
Chang, Q.; Xie, J.; Tian, H.; Wang, A.; Wang, W.; Huang, Y. 2018: Numerical Simulation and Research on the Interface Structure of Wide Cu/Al Composite Plate Prepared by Solid–Liquid Composite Method. Science of Advanced Materials 10(7): 1010-1017
Ruan, H.Y.; Xie, X.J.; Huang, S.; Zhou, J.Z. 2012: Numerical Simulation and Response Analysis of Residual Stress Induced by Micro-Scale Laser Shock Peening in Ti N Film. Advanced Materials Research 452-453: 741-745
Wan, C.D. 2012: Numerical Simulation and Response Surface Optimization of Oil-Gas Separator. Advanced Materials Research 466-467: 396-399
Du, M.; Hou, Y.; Guo, Y.; Wang, K. 2020: Numerical Simulation and Risk Analysis of Coastal Inundation in Land Reclamation Areas: a Case Study of the Pearl River Estuary. Journal of Ocean University of China 19(6): 1221-1234
Zheng, Z.; Liu, R.; Zhang, Q. 2019: Numerical Simulation and Risk Assessment of Water Inrush in a Fault Zone that Contains a Soft Infill. Mine Water and the Environment 38(3): 667-675
Zhu, P.; Wei, W.; Mei, J.; Tu, J.; Ding, R. 2017: Numerical Simulation and Scene Experiment of Metro Tunnel with Crossover Interval under Fire Conditions. Procedia Engineering 205: 87-94
Wu, Z.G.; Li, S.H.; Zhang, W.G. 2010: Numerical Simulation and Sensitivity Analysis for Tube Hydropiercing Quality Based on Experiments. Advanced Materials Research 139-141: 639-644
Cao, L.; Li, Z.; Wu, H. 2019: Numerical Simulation and Sensitivity Study of the Rhodium Self-Powered Neutron Detector Used in PWR. IEEE Transactions on Nuclear Science 66(4): 742-751
Huikun, P.; Xin, Z.; Xun, L.; Ronghui, H. 2016: Numerical Simulation and Stability Analysis of Aerodynamic Characteristics of Multi Propeller. Journal of Computational and Theoretical Nanoscience 13(12): 9317-9322
Dou, H.; Jiang, G.; Lei, C. 2013: Numerical Simulation and Stability Study of Natural Convection in an Inclined Rectangular Cavity. Mathematical Problems in Engineering 2013: 1-12
Ma, B.F.; Shen, A.Q.; Wan, C.G. 2014: Numerical Simulation and Structural Mechanical Analysis of Asphalt Pavement due to Abrupt Temperature Drop. Advanced Materials Research 912-914: 255-262
Shi, C.Y.; Sun, Y.C.; Sun, Y.H. 2012: Numerical Simulation and Studies of Temperature Rise within a High-Pressure Vessel during Refueling. Advanced Materials Research 591-593: 606-610
Yao, W.J.; Li, B.; Guo, C.P.; Huang, X.S. 2011: Numerical Simulation and Study about Partial Ossicular Replacement Prostheses with Several Various Materials on Hearing Restoration. Advanced Materials Research 236-238: 2899-2904
Li, X.; Soo, S. 2010: Numerical Simulation and Superplastic Forming of Ti-6Al-4V Alloy for a Dental Prosthesis. Journal of Materials Engineering and Performance 20(3): 341-347
Dong, Y.; Fan, X.M.; Liu, B. 2011: Numerical Simulation and Technology Optimization of Rear Oil Seal Bearing die Castings Based on Pro CAST. Advanced Materials Research 189-193: 4008-4013
Lan, Y.W.; Cai, Z.Y.; Li, M.Z. 2011: Numerical Simulation and Test Research of Continuous Flexible Forming Process for the Spherical Parts. Advanced Materials Research 291-294: 269-272
Zhao, J.J.; Lu, Z.J.; Xie, S.C. 2012: Numerical Simulation and Test Research on Knurl Interference Connection. Advanced Materials Research 619: 207-212
Yang, H.; Wang, J.L.; Hao, Y.F. 2012: Numerical Simulation and Test Study on Non-Preheating Welding Technology of HSLA Q550 Applied to Hydraulic Structures. Advanced Materials Research 546-547: 110-114
Lu, F. 2021: Numerical Simulation and Theoretical Analysis of Terahertz Sheet Beam TWTs Based on a Ridge-Loaded Folded Waveguide SWS. IEEE Transactions on Plasma Science 49(4): 1333-1339
Li, B. 2012: Numerical Simulation and Thermal Analysis in Milling of Titanium Alloy. Advanced Materials Research 503-504: 556-559
Sun, K.; Yang, Q.; Yang, Y.; Wang, S.; Xie, Y.; Sun, M.; Chen, X.; Xu, J. 2015: Numerical Simulation and Thermal Analysis of Stratospheric Airship. Procedia Engineering 99: 763-772
Sun, L.; Xing, J.W.; Cheng, W.H. 2011: Numerical Simulation and Verification of Multi-Operation Sheet Forming Process for Stamping Parts of Spiral Step Surface. Advanced Materials Research 189-193: 2911-2916
Zhu, Y.; Gao, X.; Li, X. 2011: Numerical Simulation and Visualization of Flow Field in a Special Piloted Directional Valve for Marine Steering Gear. Procedia Engineering 24: 539-545
Shen, X.; Wang, T.; Zhong, W. 2012: Numerical Simulation and Wake Modeling of Wind Turbine Rotor as An Actuator Disk. International Journal of Modern Physics: Conference Series 19: 320-330
Xie, D.; Liu, Z.H.; Xiong, J.; Ye, Y.J. 2012: Numerical Simulation and Water Tank Experiment on Atmospheric Wind Field over a Mountain under Neutral Stability Condition. Advanced Materials Research 573-574: 466-470
Wang, G.X.; Hu, Y.; Xu, T.T.; Li, Z.F.; Yang, B. 2013: Numerical Simulation and Wind Tunnel Experiment of the Aerodynamic Characteristics of a Formula Student Racing Car. Advanced Materials Research 774-776: 460-464
Chang, C.H.; Wang, J.M.; Cheng, C.M. 2011: Numerical Simulation and Wind Tunnel Studies of the Wind Load on Wind Turbine Structures. Advanced Materials Research 250-253: 3811-3814
Laouar, R.; Wünsch, O. 2010: Numerical Simulation and analysis of molten flow in the shot sleeve of die casting process. PAMM 10(1): 471-472
Huang, Y.; Dong, Y.; Du, X.M. 2012: Numerical Simulation and die Casting Process for Cylinder. Advanced Materials Research 490-495: 2362-2365
Lin, Q.; Meng, B.; Yang, Q.H. 2012: Numerical Simulation and die Design for Vibration Extrusion of Spur Gear. Advanced Materials Research 580: 37-41
Xia, W.; Wang, C.; Jiang, L.H.; Zeng, J.M. 2014: Numerical Simulation and die Optimization Design of Extrusion Process for a Complex Hollow Aluminum Alloy Multi-Hole die. Advanced Materials Research 881-883: 1778-1783
Jian, J.; Chen, H.; Shi, B. 2017: Numerical Simulation for 2D Sedimentation Model by an Upwind Discontinuous Galerkin Procedure. Mathematical Problems in Engineering 2017: 1-17
Sami Rashad, M.; Liu, H.; Ali Khan, S. 2022: Numerical Simulation for Bioconvection of Unsteady Stagnation Point Flow of Oldroyd-B Nanofluid with Activation Energy and Temperature-Based Thermal Conductivity past a Stretching Disk. Computer Modeling in Engineering-Sciences 130(1): 233-254
Yong-Qiang, L.; Jun-Yan, D.; Wei, R. 2020: Numerical Simulation for Capillary Driven Flow in Capsule-Type Vane Tank with Clearances under Microgravity. Microgravity Science and Technology 32(3): 321-329
Chen, J.; Wang, Z.; Zhang, J.; Zhang, L.; Wu, G. 2015: Numerical Simulation for Changes in Aerodynamic Characteristics Along the Spanwise of "Diamond Back" Wing. Procedia Engineering 99: 566-574
Yang, Q.H.; Pan, J.; Zhang, J.X.; Chen, W.B.; Meng, B. 2012: Numerical Simulation for Cold Extrusion of Bevel Gear. Advanced Materials Research 497: 356-364
Liu, M.H.; Zhang, C.Z.; Yang, M. 2013: Numerical Simulation for Conjugated Heat Transfer in Concentric Tube Recuperator with Longitudinal Fins. Advanced Materials Research 753-755: 948-954
Yamauchi, T.; Kubo, S.; Mizukami, T.; Sato, N.; Aono, N. 2008: Numerical Simulation for Designing Next Generation TWC System with Detailed Chemistry. SAE International Journal of Fuels and Lubricants 1(1): 795-802
An, X.W.; Wang, J.S.; She, X.F.; Ding, Y.G.; Xue, Q.G. 2011: Numerical Simulation for Direct Reduction of Pure Zinc Oxide Pellet Containing Carbon. Advanced Materials Research 194-196: 56-60
Okamoto, M.; Mori, N. 2004: Numerical Simulation for Direct Tunneling Current in Poly-Si-Gate MOS Capacitors. Journal of Computational Electronics 3(3-4): 439-442
Zhang, T.; Luo, Z.G.; Zhou, H.; Liu, C.L.; Sun, J.J.; Han, L.H.; Zou, Z.S. 2013: Numerical Simulation for Distribution of Void Fraction in Water Model of Continuous Casting Mold. Advanced Materials Research 712-715: 755-759
Liu, Y.; Gao, L.T. 2006: Numerical Simulation for Dynamic Crack Propagation by MLPG. Fracture and Damage Mechanics V: 495-498
Wang, Y.M.; Li, H.; Zhang, H. 2011: Numerical Simulation for Dynamic Response of EPS Geofoam Seismic Buffers. Advanced Materials Research 378-379: 256-261
Li, F. 2009: Numerical Simulation for Effects of Microcapsuled Phase Change Material (Mpcm) Distribution on Heat and Moisture Transfer in Porous Textiles. Modern Physics Letters B 23(03): 501-504
Tang, D.; Lv, H.M.; Hu, M.; Yao, S.D. 2013: Numerical Simulation for Effects of Running Surface Profile Structure in Piston Ring Group on Blow-By and LOC. Advanced Materials Research 683: 913-916
Sadanand; Dwivedi, D.K. 2020: Numerical Simulation for Enhancement of the Output Performance of CZTS Based Thin Film Photovoltaic Cell. Advanced Science, Engineering and Medicine 12(1): 88-94
Guo, C.L.; Wang, H.; Qian, X.L.; Zhou, T.X. 2012: Numerical Simulation for Erosion Thinning of Pipes in Petrochemical Plant. Advanced Materials Research 588-589: 3-6
Chakrabarti, P.; Madheswaran, M.; Gupta, A.; Khan, N A.; Rajamani, V. 2000: Numerical Simulation for Estimating the Optically Controlled Characteristics of an Ion-Implanted Si-MESFET. IETE Journal of Research 46(4): 205-214
Ke, Z.; Zhongqi, H.; Shupan, Y.; Wanghua, C. 2014: Numerical Simulation for Exploring the Effect of Viscosity on Single-screw Extrusion Process of Propellant. Procedia Engineering 84: 933-939
Zhang, F.L.; Deng, S.S.; Hua, W.X. 2011: Numerical Simulation for Flow Field in Hydrocyclone. Advanced Materials Research 335-336: 683-687
Peng, H.W.; Lou, Y.; Lv, Y.H.; Wang, H.X.; Wang, C.S.; Li, J.B. 2013: Numerical Simulation for Fluid Flow of Flow Channel Structure in the Injection-Rolling Nozzle during Polymer Continue Injection Direct Rolling. Advanced Materials Research 834-836: 1584-1587
Wan, X.W.; Wang, T.; Yao, X.M. 2013: Numerical Simulation for Free Rolling Motion of a Surface Vehicle. Advanced Materials Research 760-762: 1856-1859
Ma, Q.; Chen, Z.; Xu, B. 2015: Numerical Simulation for Gas Diffusion in Fractal Reconstructed Anisotropic Porous Building Materials. Procedia Engineering 121: 240-247
Sun, X.F.; Qu, J.B.; Yan, T.; Wang, L. 2013: Numerical Simulation for Gas-Liquid Two-Phase Flow along the Borehole after Air Cutting. Advanced Materials Research 821-822: 1414-1417
Pan, X.; Zhang, L. 2012: Numerical Simulation for General Rosenau-RLW Equation: An Average Linearized Conservative Scheme. Mathematical Problems in Engineering 2012: 1-15
Zhang, Y.L.; Rao, Z.H.; Xie, J.F.; Zhang, H.; Wang, S.F. 2012: Numerical Simulation for Heat Storage Study of the Microencapsulated Phase Change Material Slurry in a Horizontal Rectangular Enclosure. Advanced Materials Research 455-456: 278-283
Han, S.L.; Wu, Y.W.; Zeng, Q.L. 2012: Numerical Simulation for Heat Transfer Process of Clinching with Magnesium Alloys. Advanced Materials Research 472-475: 1995-1999
Jiang, Y.Y.; Lin, P.; Li, B.T.; Li, L. 2014: Numerical Simulation for Heat Transfer of Nanofluid in a Rotating Circular Groove Using a Continuous Finite Element Scheme. Advanced Materials Research 1081: 175-179
Li, C.; Tsai, T.; Tseng, C. 2016: Numerical Simulation for Heat and Mass Transfer During Selective Laser Melting of Titanium alloys Powder. Physics Procedia 83: 1444-1449
Wang, Y.S.; Chen, Z.H.; Zhang, F.C. 2012: Numerical Simulation for Karst Water Drainage of an Iron Mine. Advanced Materials Research 450-451: 486-490
Sun, K.Y.; Zhao, X.Y.; Zang, H.M.; Zhang, G.L. 2013: Numerical Simulation for Lightning Zoning on an Aircraft. Advanced Materials Research 850-851: 328-331
Sun, M.L.; Cui, H.R.; Wang, B.; Chen, W.Z. 2010: Numerical Simulation for Magnetic Fluid Inclination Sensor. Advanced Materials Research 156-157: 90-93
Hayat, T.; Shah, F.; Alsaedi, A.; Waqas, M. 2018: Numerical Simulation for Magneto Nanofluid Flow Through a Porous Space with Melting Heat Transfer. Microgravity Science and Technology 30(3): 265-275
Khader, M. M.; Aljouiee, A. 2015: Numerical Simulation for Mathematical Model of the Hepatitis C with Different Types of Virus Genome Using Legendre Spectral Collocation Method. Journal of Computational and Theoretical Nanoscience 12(11): 4601-4606
Li, Q.; Yang, X.X. 2012: Numerical Simulation for Mechanical Behavior of Carbon Black Filled Rubber Composites Based on Plane Stress Model. Advanced Materials Research 476-478: 2543-2547
Liu, M.J.; Liu, G.C. 2012: Numerical Simulation for Metal Powder Cross Shear Rolling Compaction. Advanced Materials Research 569: 111-115
Hu, X.; Mei, R.B.; Zhu, F.; Fan, Y.; Liang, Y.B.; Wang, X.B.; Wang, D.G.; Jing, Z.R. 2013: Numerical Simulation for Microstructure Evolution in In718 Alloy During Cylindrical Cup Backward Extrusion. Advanced Materials Research 650: 92-97
Hu, G.; Peng, S.A.; Wang, W. 2010: Numerical Simulation for Migration of the Pollutants in Soil. Advanced Materials Research 113-116: 1684-1687
Jiang, Y.; Lin, P.; Guo, Z.; Dong, S. 2015: Numerical Simulation for Moving Contact Line with Continuous Finite Element Schemes. Communications in Computational Physics 18(1): 180-202
Yu, M.; Lin, J.; Chan, T. 2009: Numerical Simulation for Nucleated Vehicle Exhaust Particulate Matters Via the Temom/les Method. International Journal of Modern Physics C 20(03): 399-421
Hu, Z.S.; Zhu, Z.W.; Yang, R.P.; Wu, L.J.; Mao, H.M.; Du, L.Z.; Li, R. 2011: Numerical Simulation for Optical Crystal Growth by TSSG Method. Advanced Materials Research 421: 503-506
Wang, J.N.; Tang, S.F.; Ma, C. 2013: Numerical Simulation for Pile Group in Water Flume of 2-D Tidal Flow. Advanced Materials Research 779-780: 1171-1175
Zhang, Q.; Wu, Z. 2008: Numerical Simulation for Porous Medium Equation by Local Discontinuous Galerkin Finite Element Method. Journal of Scientific Computing 38(2): 127-148
Li, R.X.; Jiao, S.H. 2012: Numerical Simulation for Precision Roll-Forging of Automobile Front Axle. Advanced Materials Research 602-604: 1850-1854
Wang, L.; Liu, Y.; Zhang, W.; Wang, H. 2012: Numerical Simulation for Processing Windows of Ti Al Alloys During Hot Forging. Journal of Computational and Theoretical Nanoscience 9(9): 1485-1490
Tian, L.; Huang, F. 2013: Numerical Simulation for Progressive Collapse of Continuous Girder Bridge Subjected to Ship Collision Based on Three-Stage Simulation Method. Advanced Materials Research 790: 362-366
Tian, L.; Feng, X.H. 2011: Numerical Simulation for Progressive Collapse of Underground Structure under its Internal Blast Load. Advanced Materials Research 250-253: 2824-2828
Li, F.S.; Sun, D.; Xu, X.X.; Zhao, X.G.; Tan, S.L. 2011: Numerical Simulation for Relationship between Vortex Evolution and Diffusion of Aerosol in Human Mouth-Throat Model. Advanced Materials Research 301-303: 456-461
Wei, S.; Zhang, Z.; Shen, X.; Wang, F.; Lee, S. 2012: Numerical Simulation for Residual Stresses of the Spark Plasma Sintered Ti–Ti B Composites. Journal of Computational and Theoretical Nanoscience 9(9): 1180-1184
Cao, L.J.; Li, S.J.; Shang Guan, Z.C. 2013: Numerical Simulation for Rock Fracturing Process under Action of Disc Cutter. Advanced Materials Research 690-693: 3054-3058
Tang, Q.; Zhang, J.; Feng, Y.; Li, J.; Yao, Y.; Sun, J.; Zhan, W. 2018: Numerical Simulation for Shallow Strata Stability of Coral Reef in the Southwest of Yongshu Reef (South China Sea). Journal of Ocean University of China 17(4): 763-772
Yuan, B.Y.; Wang, Q.; Lu, H.F. 2013: Numerical Simulation for Shear Characteristics of Rock-Mass Structural Plane. Advanced Materials Research 734-737: 574-578
Wang, J.; Liu, F. 2011: Numerical Simulation for Shot-Peening Based on Sph-Coupled Fem. International Journal of Computational Methods 08(04): 731-745
Li, L.X.; Zhao, L.Y. 2011: Numerical Simulation for Smoke Flow of the Underground Railway Tunnel Fire. Advanced Materials Research 368-373: 1454-1457
Dong, Z.Y.; Zhao, J.H.; Hill, D.J. 2012: Numerical Simulation for Stochastic Transient Stability Assessment. IEEE Transactions on Power Systems 27(4): 1741-1749
Xiao, Z.; Wu, J. 2011: Numerical Simulation for Stress Field Due to Corrosion of Rebar in Concrete Structure. Advanced Materials Research 255-260: 137-141
Hu, Z.D.; Sun, Q.P.; Zhong, Z. 2007: Numerical Simulation for Stress-Induced Phase Transformation of SMAs Tube under Tension. Engineering Plasticity and Its Applications: 1181-1186
Luo, J.; Zhao, G.; Wang, X.; Sun, Y.; Xu, X. 2011: Numerical Simulation for Temperature Changes of 35Cr Mn Si/T3 Dissimilar Metals Joint in Radial Friction Welding. Advanced Science Letters 4(8): 2812-2816
Luo, J.; Wang, X.; Li, F.; Luo, Q.X. 2011: Numerical Simulation for Temperature Field of ZK60 Magnesium Alloy Sheet Butt-Welded in GTAW Hybrid a Longitudinal Electromagnetic Field. Advanced Materials Research 215: 5-8
Pei, G.H.; Han, D.X.; Leng, J. 2012: Numerical Simulation for Temperature Variability of the Stable Transported Hot Oil Pipeline. Advanced Materials Research 502: 386-391
Wang, Y.X.; Dong, M. 2012: Numerical Simulation for Temperature of Ceramic Honeycomb Regenerator. Advanced Materials Research 562-564: 359-362
Li, W.G.; Li, D.Y.; Wang, C.; Fang, D.N. 2011: Numerical Simulation for Thermal Shock Resistance of Thermal Protection Materials under Temperature Rising. Advanced Materials Research 197-198: 1509-1514
Jiang, Y.; Wang, B.Y.; Hu, Z.H.; Lin, J.G. 2011: Numerical Simulation for Thick-Walled Hollow Axle during Cross Wedge Rolling. Advanced Materials Research 337: 270-273
Bhrawy, A. H.; El-Soubhy, S. I. 2015: Numerical Simulation for Thomas-Fermi Equation on a Semi-Infinite Interval. Journal of Computational and Theoretical Nanoscience 12(11): 4719-4723
Dong, F.; Xing, S.C.; Guo, C.H. 2013: Numerical Simulation for Transient Flow of Field of Water Jet Based on Euler Method. Advanced Materials Research 694-697: 551-554
Bai, J.; Dang, J. 2012: Numerical Simulation for Turbulent Combustion in Underwater Vehicle Combustor. Procedia Engineering 31: 844-849
Gu, Y.Z.; Dong, Z.F.; Kuang, Q.J.; Liu, J.; Zhang, Y.Z. 2013: Numerical Simulation for Two-Phase Flow Field of FGD Scrubber in Ship. Advanced Materials Research 739: 450-453
Zhao, W.K.; Zhao, S.J.; Shan, Y.L.; Sun, X.J. 2021: Numerical Simulation for Wind Shear Detection with a Glide Path Scanning Algorithm Based on Wind Li DAR. IEEE Sensors Journal 21(18): 20248-20257
He, D. 2010: Numerical Simulation for a Droplet Fission Process of Electrowetting on Dielectric Device. Communications in Computational Physics 7(5): 1076-1094
Shamloo, A.; Mirzakhanloo, M.; Dabirzadeh, M.R. 2016: Numerical Simulation for efficient mixing of Newtonian and non-Newtonian fluids in an electro-osmotic micro-mixer. Chemical Engineering and Processing - Process Intensification 107: 11-20
Bian, K.F.; Li, H.B.; Liu, Y.Q. 2014: Numerical Simulation for the Damping Effect of Empty Holes on Blasting Vibration. Advanced Materials Research 936: 1490-1495
Cheng, T. 2011: Numerical Simulation for the Deformation of Composite Wall Insulation System. Advanced Materials Research 374-377: 187-190
Fukuhara, H. 1992: Numerical Simulation for the Effect of Sound Velocity Anisotropy on Shift of Probe Index and Beam Angle of Ultrasonic Angle Probes. Nondestructive Testing and Evaluation: 8-9(1-6): 417-429
Yang, D.; Hu, X.; Zhang, S.Y.; Dai, M. 2007: Numerical Simulation for the Effective Conductivity of Composite Medium in High Frequency. PIERS Online 3(4): 457-461
Wang, Z.; Yao, J.; Peng, S. 2014: Numerical Simulation for the Effects of Ice Thickness on the Overhead Transmission Cable Tension. Advanced Materials Research 919-921: 1307-1311
Zhang, Y.; Zhou, Z.Z.; Yuan, J.L.; Lu, C.D. 2011: Numerical Simulation for the Interaction of the Semi-Fixed Abrasive Plate with the Workpiece. Advanced Materials Research 305: 107-111
Fang, S.L.; Jin, S.P.; Zhang, Y.X.; Huang, S.Y.; Wen, W.Q. 2012: Numerical Simulation for the Optimization of the Angle of the Velocity of the Hydrogen in the High Performance Hydrogen Bell-Type Annealers. Advanced Materials Research 535-537: 1542-1546
Anwari, M.; Takahashi, S.; Harada, N. 2005: Numerical Simulation for the Performance of a Magnetohydrodynamic Accelerator. TRANSACTIONS OF THE JAPAN SOCIETY FOR AERONAUTICAL AND SPACE SCIENCES 48(160): 57-62
Feng, G.H.; Zhang, H.L.; Zhang, P. 2013: Numerical Simulation for the Roll Forming Process of a Channel Steel. Advanced Materials Research 821-822: 1376-1380
Luan, L.; Liu, Y.; Li, Y. 2015: Numerical Simulation for the Soil-Pile-Structure Interaction under Seismic Loading. Mathematical Problems in Engineering 2015: 1-7
Cai, X. 2011: Numerical Simulation for the System of Ordinary Differential Equations. Advanced Materials Research 179-180: 37-42
Lin, Y.C.; Lu, J.H.; Zhang, J. 2010: Numerical Simulation for the Thermal Fatigue of Flip Chip Solder Joints. Advanced Materials Research 97-101: 3963-3966
Cheng, T.; Yan, K.Q. 2010: Numerical Simulation for the Thermal Stress of Composite Wall Insulation System. Advanced Materials Research 168-170: 875-879
Liu, G.Y.; Wei, G.F. 2013: Numerical Simulation for the Thermo-Mechanical Coupling of Tubular Braided Carbon/Carbon Composites. Advanced Materials Research 750-752: 20-23
Sweilam, N.H.; Abou Hasan, M.M. 2017: Numerical Simulation for the Variable-Order Fractional Schrödinger Equation with the Quantum Riesz-Feller Derivative. Advances in Applied Mathematics and Mechanics 9(4): 990-1011
Shi, Y.Q. 2010: Numerical Simulation in Deep Drawing of Cylindrical Cup with Circular Diving Equally Small Holes on Edge of Circle Blank. Advanced Materials Research 148-149: 769-773
Shi, Y.Q.; Guan, A.Z. 2010: Numerical Simulation in Deep Drawing of Cylindrical Cup with Elliptical Shape die Shoulder. Advanced Materials Research 148-149: 1355-1359
Dobre, A.; Morega, A.M. 2010: Numerical Simulation in Magnetic Drug Targeting. Magnetic Field Source Optimization. XII Mediterranean Conference on Medical and Biological Engineering and Computing 2010: 651-654
Huang, J.H.; Li, L.X.; Wan, Y.Y.; Guo, J.T. 2010: Numerical Simulation in Rear Axlecap of Automobile Drawing Process and Optimization of Technological Parameters. Advanced Materials Research 148-149: 1171-1176
Huang, L.C.; Zhou, C.Y.; Li, W.K.; Zhang, W.Y. 2010: Numerical Simulation in Soft Argillaceous Shale Geo-Material Based on Porous Elasto-Plastic Model. Advanced Materials Research 152-153: 418-423
Geng, M.; Liang, H.; Yin, H.; Liu, D.; Gao, Y. 2012: Numerical Simulation in Whole Space for Resistivity Logging through Casing under Approximate Conditions. Procedia Engineering 29: 3600-3607
Raja, P.V.; Murty, N.V.L.N.; Rao, C.V. S.; Abhangi, M. 2015: Numerical Simulation of 14.1 Me V Neutron Irradiation Effects on Electrical Characteristics of PIPS Detector for Plasma X-Ray Tomography. IEEE Transactions on Nuclear Science 62(4): 1634-1641
Sun, G.; Wei, W.L.; Liu, Y.; Wang, X.; Liu, M.Q. 2012: Numerical Simulation of 2D Circular Dam-Break Flows with WENO Schemes. Advanced Materials Research 468-471: 2201-2205
Pan, Y.; Wei, W.; Liu, Y. 2011: Numerical Simulation of 2D Flood Fliud on Unstructured Grid. Advanced Materials Research 393-395: 1295-1299
Liu, M.Q.; Liu, Y.L.; Wei, W.L. 2011: Numerical Simulation of 2D Flow in a Curved Channel. Advanced Materials Research 374-377: 378-381
Wei, W.L.; Zhao, X.; Liu, Y. L. 2012: Numerical Simulation of 2D Hydraulic Jump Flow in a Vertical Plane. Advanced Materials Research 482-484: 16-20
Iyi, D.; Hasan, R.; Penlington, R. 2013: Numerical Simulation of 2D Turbulent Natural Convection of Humid Air in a Cavity Filled with Solid Objects. Procedia Engineering 56: 538-543
Zhang, J.X.; Tang, C.A.; Zhou, X.Y.; Hui, X.J.; Liang, Z.Z.; Wang, S.H.; Guo, X.Z. 2007: Numerical Simulation of 3-D Failure Process of Reinforced Concrete Specimen under Uniaxial Tension. Key Engineering Materials: 949-952
Zhenwei, M.; Zhiyan, Z.; Tao, Z. 2012: Numerical Simulation of 3-D Flow Field of Spillway based on VOF Method. Procedia Engineering 28: 808-812
Zhang, J.X.; Tang, C.A.; Hui, X.J.; Zhu, W.C.; Liang, Z.Z.; Zhang, Y.B.; Guo, X.Z. 2006: Numerical Simulation of 3-D Fracture Behaviors on the FRP-Strengthened Concrete Structures. Fracture and Damage Mechanics V: 423-426
Chen, H.; Guo, J. 2007: Numerical Simulation of 3-D Turbulent Flow in the Multi-Intakes Sump of the Pump Station. Journal of Hydrodynamics 19(1): 42-47
Lee, Y.H.; Song, C.W.; Kim, T.; Kim, K.H.; Choi, S. 2019: Numerical Simulation of 3-Dimensional Temperature Distribution in a Hot Filament Chemical Vapor Deposition Chamber. Science of Advanced Materials 11(11): 1587-1593
Xing, L.; Huang, G.; Yan, M. 2011: Numerical Simulation of 3D Density Flow by an Improved EASM Model. Procedia Environmental Sciences 10: 753-758
Đorđević, D.; Stojnić, I. 2016: Numerical Simulation of 3D Flow in Right-angled Confluences with Bed Elevation Discordance in Both Converging Channels. Procedia Engineering 154: 1026-1033
Li, F. 2012: Numerical Simulation of 3D In-situ Stress in Hailaer Oil Field. Procedia Environmental Sciences 12: 273-279
Xia, G.H.; Zhao, Y.; Yeo, J.H. 2005: Numerical Simulation of 3d Fluid-Structure Interaction Using An Immersed Membrane Method. Modern Physics Letters B 19(28n 29): 1447-1450
Jiang, C. 2009: Numerical Simulation of 980 nm-LD-Pumped Yb3+-Er3+-Tm3+-Codoped Fiber Amplifier for 1500 nm and 1600 nm Bands. Advances in OptoElectronics 2009: 1-8
You, S.; Kalsi, S.; Ainslie, M.; Badcock, R.; Long, N.; Jiang, Z. 2022: Numerical Simulation of AC Loss in the Armature Windings of two 50 Kw-Class All-HTS Motors with Different Pole Shapes. IEEE Transactions on Applied Superconductivity 32(4): 1-7
Tan, Q.; Wang, K.; Xia, Y.M.; Zhang, K.; Xu, Z.J. 2010: Numerical Simulation of ANSYS-LS/DYNA Induced by Double-Edge Ball Tooth Hob Cutter. Advanced Materials Research 97-101: 3120-3123
Lu, D.; Ouyang, J.; Zhou, Y.; Jia, D.; Wang, Y. 2008: Numerical Simulation of Ablation Behavior and Thermal Stress Field of Fused Silica Composite. Journal of Computational and Theoretical Nanoscience 5(8): 1722-1724
Xu, Z.Y.; Wang, J.J.; Ding, S.; Wen, W.; Wang, Y.; Yin, B.F. 2010: Numerical Simulation of Accumulative Forming Bipolar Plates of Fuel Cell. Advanced Materials Research 136: 10-13
Ghadiri, M.; Rezakazemi, M.; Shirazian, S. 2019: Numerical Simulation of Acetone Stripping from Water in a Microchannel Device. Chemical Engineering-Technology 42(11): 2358-2364
Yu, L.L.; Zhao, J.H.; Zhao, Q.Z.; Hui, C. 2011: Numerical Simulation of Acoustic Field for the Miniature Cylindrical Transducer with a Rectangular Hole. Advanced Materials Research 421: 739-742
Wendlandt, B.C.H. 1990: Numerical Simulation of Acoustic Response of Discontinuous Viscoelastic Fluids. ACS Symposium Series: 260-277
Köster, D. 2007: Numerical Simulation of Acoustic Streaming on Surface Acoustic Wave-driven Biochips. SIAM Journal on Scientific Computing 29(6): 2352-2380
Chen, Z.; Zou, X.; Li, H.; Luo, H.; Wang, X. 2019: Numerical Simulation of Acoustic Wave Generated by the AC Arc. IEEE Transactions on Plasma Science 47(8): 4136-4141
Wotzka, D.; Zmarzły, D.; Boczar, T. 2010: Numerical Simulation of Acoustic Wave Propagating in a Spherical Object Filled with Insulating Oil. Acta Physica Polonica A 118(6): 1272-1275
Ben Amar, C.; Gmati, N.; Hazard, C.; Ramdani, K. 2007: Numerical Simulation of Acoustic time Reversal Mirrors. SIAM Journal on Applied Mathematics 67(3): 777-791
Chen, T.; Liu, X.L.; Luo, G.; Yan, F.G.; Jia, D.K. 2009: Numerical Simulation of Adiabatic Shear Behavior in High-Speed Machining of Hardened Steel GCr15. Advanced Materials Research 69-70: 476-479
Zilberter, I.A.; Edwards, J.R.; Wittich Iii, D.J. 2017: Numerical Simulation of Aero-Optical Effects in a Supersonic Cavity Flow. AIAA Journal 55(9): 3095-3108
Cosyn, P.; Vierendeels, J.; Anthoine, J. 2005: Numerical Simulation of Aeroacoustic Phenomena in a Solid Rocket Booster. Journal of Spacecraft and Rockets 42(1): 111-117
Colombatti, G.; Aboudan, A.; La Gloria, N.; Debei, S. 2011: Numerical Simulation of Aerobots Dynamics and Control for Planetary Exploration of Titan. Recent Patents on Space Technology 1(2): 123-133
Zhang, Y.C.; Xu, Y.G.; Qin, F.; Cao, R. 2012: Numerical Simulation of Aerodynamic Behaviors of High-Speed Trains Crossing. Advanced Materials Research 562-564: 1390-1393
Srivastava, R.; Bakhle, M.A.; Keith Jr., T.G. 2003: Numerical Simulation of Aerodynamic Damping for Flutter Analysis of Turbomachinery Blade Rows. Journal of Propulsion and Power 19(2): 260-267
Wang, J.F.; Ji, Y.B.; Zang, S.S. 2013: Numerical Simulation of Aerodynamic Performance of Film Cooling on a Flat Plate with Surface Roughness. Advanced Materials Research 853: 576-581
Du, C.; Sun, L.; Jiang, S.; Ying, Z. 2013: Numerical Simulation of Aggregate Shapes of Three-Dimensional Concrete and its Applications. Journal of Aerospace Engineering 26(3): 515-527
Du, C.; Sun, L. 2007: Numerical Simulation of Aggregate Shapes of Two-Dimensional Concrete and its Application. Journal of Aerospace Engineering 20(3): 172-178
Ťažký, L.; Sedláková, A. 2014: Numerical Simulation of Air Channel in Church Gemerský Jablonec. Advanced Materials Research 1041: 183-186
Xie, J.; Miao, C.; Gao, Z.L.; Shi, J.B.; Wang, T. 2013: Numerical Simulation of Air Curtain Used in the Cold Store through Different Models. Advanced Materials Research 749: 554-560
Hu, M.Y.; Che, K.; Zhang, J.; Wang, X.H. 2011: Numerical Simulation of Air Distribution in the Series-Type Electrostatic Fabric Filter Precipitator. Advanced Materials Research 383-390: 6530-6536
Wang, H.; Tang, Y. 2019: Numerical Simulation of Air Entrainment Performance of a Foam Generator Used for Dust Control in Coal Mines. Mathematical Problems in Engineering 2019: 1-7
Yang, J.Q.; Wei, H.B.; Li, M.J. 2012: Numerical Simulation of Air Flow Arrangement and Energy Conservation of Air-Condition. Advanced Materials Research 588-589: 1341-1345
Xu, X.W.; Su, Y.X. 2013: Numerical Simulation of Air Flow in Bi PV-Trombe Wall. Advanced Materials Research 860-863: 141-145
Ćoćić, A.; Brajović, M.; Lečić, M. 2016: Numerical Simulation of Air Flow in Model Room. PAMM 16(1): 801-802
Vekteris, V.; Strishka, V.; Ozarovskis, D.; Mokshin, V. 2015: Numerical Simulation of Air Flow inside Acoustic Cyclone Separator. Aerosol and Air Quality Research 15(2): 625-633
Zhang, H.S.; Zhan, D.P.; Deng, B.T.; Wang, L.J.; Jiang, Z.H. 2014: Numerical Simulation of Air Gap Formation in Water-Cooled Mold Casting. Advanced Materials Research 881-883: 1790-1794
Liu, X.; Zheng, H. 2013: Numerical Simulation of Air Inlet Conditions Influence on the Establishment of MILD Combustion in Stagnation Point Reverse Flow Combustor. Mathematical Problems in Engineering 2013: 1-9
Liu, Z.; Liu, C.; Liang, Y.; Li, G. 2017: Numerical Simulation of Air Terminal Type on Thermal Environment of Occupied Zone under Desktop Personalized Ventilation. Procedia Engineering 205: 1650-1656
Yang, G.L.; Yang, R.S.; Huo, C.; Che, Y. 2010: Numerical Simulation of Air-Deck Slotted Charge Blasting. Advanced Materials Research 143-144: 787-791
Yang, M.; Wu, X.; Kang, C. 2009: Numerical Simulation of Air-Water Bubbly Flow in Axial Flow Pump Impeller. IFIP Advances in Information and Communication Technology: 545-552
Zhao, K.; Liu, P.; Qu, Q.; Lin, L.; Lv, J.; Ding, W.; Agarwal, R.K. 2017: Numerical Simulation of Aircraft Tire-Generated Spray and Engine Ingestion on Flooded Runways. Journal of Aircraft 54(5): 1840-1848
Xu, F.; Tan, Z.; Shi, Y.J. 2013: Numerical Simulation of Aircraft over Run Arresting System. Advanced Materials Research 787: 485-489
Yanhe, Z.; Yahong, D.; Chang, L.; Junyong, Z.; Xuezhi, W.; Jian, Z.; Changwei, J. 2017: Numerical Simulation of Airflow Around Cooling Towers in Semi-closed Space. Procedia Engineering 205: 95-100
Song, C.; Peng, L.; Cao, J.; Mu, L.; Bai, H.; Liu, X. 2014: Numerical Simulation of Airflow Structure and Dust Emissions behind Porous Fences Used to Shelter Open Storage Piles. Aerosol and Air Quality Research 14(6): 1584-1592
Bai, M.H.; Liu, Z.Q.; Zhang, Z.M.; Liu, J.J. 2011: Numerical Simulation of Airflow in Wet Rotating Reticular Plate Electrostatic Precipitator. Advanced Materials Research 361-363: 619-622
., Y.C.; ., K.C.; ., X.P.; ., Q.Y. 2007: Numerical Simulation of Airfoil Ice Accretion Based on Parcel Concept. Trends in Applied Sciences Research 2(6): 500-507
da Silva, G.A.L.; de Mattos Silvares, O.; de Jesus Zerbini, E.J.G. 2007: Numerical Simulation of Airfoil Thermal Anti-ice Operation, Part 1: Mathematical Modelling. Journal of Aircraft 44(2): 627-633
Joo, S.M.; Bang, H.S.; Bang, H.S. 2006: Numerical Simulation of Al-SPCC Weldment. Advanced Nondestructive Evaluation I: 1738-1744
Promvonge, P.; Sripattanapipat, S.; Jedsadaratanachai, W. 2014: Numerical Simulation of Al2O3-Water Nanofluid Flow and Heat Transfer in a Tube with Angled Rings. Advanced Materials Research 931-932: 1168-1172
Yue, Z.; Li, X. 2012: Numerical Simulation of All-Composite Compressed Natural Gas (CNG) Cylinders for Vehicle. Procedia Engineering 37: 31-36
Gavaghan, D.J.; Elton, D.M.; Bond, A.M. 2001: Numerical Simulation of Alternating Current Linear Sweep Voltammetry at Microdisc Electrodes. Collection of Czechoslovak Chemical Communications 66(2): 255-275
Zhang, H.; Yang, S.; Zhang, H.; Li, J.; Xu, Y. 2014: Numerical Simulation of Alumina-Mixing Process with a Multicomponent Flow Model Coupled with Electromagnetic Forces in Aluminum Reduction Cells. JOM 66(7): 1210-1217
Bakhtiani, T.; El-Mounayri, H.; Zhang, J. 2014: Numerical Simulation of Aluminum Extrusion Using Coated die. Materials Today: Proceedings 1(1): 94-106
Dwivedi, R.; Agnihotri, G. 2015: Numerical Simulation of Aluminum and Brass Material Cups in Deep Drawing Process. Materials Today: Proceedings 2(4-5): 1942-1950
Zhang, K.J.; Wan, B. 2011: Numerical Simulation of Alx Ga1-XN/Ga N Hetero Junction Quantum well by AMPS-1D. Advanced Materials Research 282-283: 518-521
Wang, S.L.; Ge, Y.H.; Li, W.H. 2013: Numerical Simulation of Ammonia Flow Boiling in a Horizontal Circular Tube. Advanced Materials Research 718-720: 162-165
Wang, S.; Wang, Z.; Shang, H. 2012: Numerical Simulation of Ammonia Phase Change Heat Exchanger which Used for Composite Air-cooling Circulatory System. Energy Procedia 17: 1086-1091
Schwartzkopff, A.K.; Sainoki, A.; Elsworth, D. 2020: Numerical Simulation of An In-situ Fluid Injection Experiment into a Fault Using Coupled X-FEM Analysis. Rock Mechanics and Rock Engineering 54(3): 1027-1053
Sepehrinia, R.; Sheikhan, A. 2011: Numerical Simulation of Anderson Localization. Computing in Science-Engineering 13(3): 74-83
Joldes, G.R.; Zwick, B. 2015: Numerical Simulation of Anisotropic Tissue Growth Using a Total Lagrangian Formulation. Mathematical Problems in Engineering 2015: 1-5
Tanaka, Y.; Momma, A.; Sato, K.; Kato, T. 2019: Numerical Simulation of Anode-Supported Disc-Type Single Cell at Anode Off-Gas Recycle. ECS Transactions 35(1): 739-746
Goel, M.; Pawar, P. 2017: Numerical Simulation of Anti-ram Bollard under Vehicle Impact. Procedia Engineering 173: 1595-1601
Fan, Y.R.; Li, H.; Hu, Y.Y.; Sun, Q.T. 2012: Numerical Simulation of Array Induction Logs Time-Lapse Responses and Formation Resistivity Profile Reconstruction with 5-Parameter Inversion. Advanced Materials Research 588-589: 1359-1363
Ferrara, A.; Pandolfi, A. 2008: Numerical Simulation of Arterial Plaque Ruptures. International Journal of Material Forming 1(S 1): 1095-1098
Jia, L.; Wang, C.; Wei, Y.; Wang, H.; Zhang, J.; Yu, K. 2006: Numerical Simulation of Artificial Ventilated Cavity. Journal of Hydrodynamics 18(3): 273-279
Gardiner, L.T.; Turfus, C.; Putman, M.E. 1998: Numerical Simulation of Asymmetric Spiral Structure in the Large Magellanic Cloud. The Astrophysical Journal 507(1): L35-L38
Peng, X.Y.; Liu, Z.H.; Xie, Q.F.; Zhang, X.; Wan, F.; Huang, S. 2012: Numerical Simulation of Atmospheric Diffusion of Radon Emanating from Flat Ground Uranium Tailings Impoundment in Different Heights. Advanced Materials Research 518-523: 1677-1681
Jia, Y.; Zheng, C.C. 2013: Numerical Simulation of Atmospheric Flow Field around Highways. Advanced Materials Research 639-640: 481-484
Liu, S.; Tai, W.; Fan, M.; Luo, Q. 2012: Numerical Simulation of Atomization Rainfall and the Generated Flow on a Slope. Journal of Hydrodynamics 24(2): 273-279
Godfrey, B.B. 1977: Numerical Simulation of Autoresonant Ion Acceleration. IEEE Transactions on Plasma Science 5(4): 223-230
Li, Y.Y.; Zhao, Z.N.; Wen, Z.Q. 2014: Numerical Simulation of Axial-Flow Fan with Adjustable Vanes in the Pant. Advanced Materials Research 1065-1069: 2141-2146
Tome, M.; Castelo, A.; Murakami, J.; Cuminato, J.; Minghim, R.; Oliveira, M.; Mangiavacchi, N.; McKee, S. 2000: Numerical Simulation of Axisymmetric Free Surface Flows. Journal of Computational Physics 157(2): 441-472
Cho, I.H.; Baek, S.W. 2000: Numerical Simulation of Axisymmetric Solid Rocket Motor Ignition Transient with Radiation Effect. Journal of Propulsion and Power 16(4): 725-728
Boetcher, S.K.S.; Sparrow, E.M. 2007: Numerical Simulation of Axisymmetric, Turbulent Buoyant Plumes- Application to Displacement Ventilation. Numerical Heat Transfer, Part A: Applications 51(11): 1023-1040
Tan, L.S.; Lau, W.S.; Samudra, G.S.; Lee, K.M.; Ang, B.Y. 1994: Numerical Simulation of Backgating Suppression in High Electron Mobility Transistors (HEMTs) with a Low Temperature Molecular Beam Epitaxy (MBE)-Grown Gallium Arsenide Buffer Layer between the Substrate and Active Layers. Japanese Journal of Applied Physics 33(Part 2, No. 6B): L826-L829
Wang, T.T.; Yang, Q.S. 2010: Numerical Simulation of Backward Facing Step Flow Using Nonlinear Eddy Viscosity Model. Advanced Materials Research 163-167: 4120-4124
Narayanamurthy, V.; Rao, C.; Rao, B. 2014: Numerical Simulation of Ballistic Impact on Armour Plate with a Simple Plasticity Model. Defence Science Journal 64(1): 55-61
Rouchon, P.; Schonauer, M.; Valentin, P.; Guiochon, G. 1987: Numerical Simulation of Band Propagation in Nonlinear Chromatography. Separation Science and Technology 22(8-10): 1793-1833
Zhang, Q.; Mao, Z.; Yang, C.; Zhao, C. 2008: Numerical Simulation of Barium Sulfate Precipitation Process in a Continuous Stirred Tank with Multiple-Time-Scale Turbulent Mixer Model. Industrial-Engineering Chemistry Research 48(1): 424-429
Chen, W.; Wu, Z.; Liu, J.; Shi, S.; Zhou, Y. 2011: Numerical Simulation of Batoid Locomotion. Journal of Hydrodynamics 23(5): 594-600
Dai, X.; Li, H.; Shen, S.; Cai, M.; Wu, S. 2015: Numerical Simulation of Bearing Force over Bit-Patterned Media using 3-D DSMC Method. IEEE Transactions on Magnetics 51(11): 1-4
Chen, B.; Mau, S.T. 1990: Numerical Simulation of Behavior of Spirally Reinforced Columns. Journal of Structural Engineering 116(10): 2842-2860
Xiao, H.; Dang, Y.C.; Zhang, S.H.; Lu, D.H. 2012: Numerical Simulation of Bending Angle on Geometric Accuracy of AZ31 Mg Alloy Profile during Warm Bending Process. Advanced Materials Research 482-484: 314-317
Sun, Y.P.; Zhou, W.L.; Li, H.; Li, J.M. 2013: Numerical Simulation of Bending Performance of Laser-Welded I-Core Sandwich Plates Considering Weld Material Properties. Advanced Materials Research 742: 24-29
Gattmah, J.; Ozturk, F.; Orhan, S. 2019: Numerical Simulation of Bending Process for Steel Plate Using Finite Element Analysis. Arabian Journal for Science and Engineering 44(12): 10285-10292
Sevruk, B.B. 2005: Numerical Simulation of Bessel-Gauss Light Beams in Crystals with Quadratic Nonlinearity. Journal of Applied Spectroscopy 72(3): 382-390
Medale, M.; Cerisier, P. 2002: Numerical Simulation of Be´nard-Marangoni Convection in Small Aspect Ratio Containers. Numerical Heat Transfer, Part A: Applications 42(1-2): 55-72
Dong, Y.B.; Chen, M.; Wang, X. 2013: Numerical Simulation of Binary Alloy Crystal Growth Using Phase-Field Method. Advanced Materials Research 842: 57-60
Chen, M.; Jiang, Y.; Sun, W.L.; Hu, X.D.; Liu, C.L. 2013: Numerical Simulation of Binary Alloy Crystal Growth of Multiple Dendrites and Direcitonal Solidification Using Phase-Field Method. Advanced Materials Research 774-776: 703-706
Wang, Q. 2011: Numerical Simulation of Bio-Oil Emulsion Combustion in the Direct-Flow Combustor. Advanced Materials Research 347-353: 3582-3586
HadiJafari, P.; Risberg, M.; Hellström, J.G.I.; Gebart, B.R. 2020: Numerical Simulation of Biomass Gasification in an Entrained Flow Cyclone Gasifier. Energy-Fuels 34(2): 1870-1882
Li, Z.C.; Sheng, Q.H.; Zhang, L.; Cong, Z.M.; Jiang, J. 2011: Numerical Simulation of Blade-Wake Interaction of Vertical Axis Tidal Turbine. Advanced Materials Research 346: 318-323
Yamashita, R.; Suzuki, K. 2018: Numerical Simulation of Blast Wave Due to Meteorite Explosion in Stratified Atmosphere. TRANSACTIONS OF THE JAPAN SOCIETY FOR AERONAUTICAL AND SPACE SCIENCES 61(3): 132-140
Teland, J.A.; Hamberger, A.; Huseby, M.; Säljö, A. 2010: Numerical Simulation of Blast-Induced Mild Traumatic Brain Injury. IFMBE Proceedings: 350-353
Šeta, B.; Torlak, M.; Vila, A. 2017: Numerical Simulation of Blood Flow Through the Aortic Arch. IFMBE Proceedings: 259-268
Xu, L.; Yang, T.; Yin, L.; Kong, Y.; Vassilevski, Y.; Liang, F. 2020: Numerical Simulation of Blood Flow in Aorta with Dilation: a Comparison between Laminar and LES Modeling Methods. Computer Modeling in Engineering-Sciences 124(2): 509-526
Boghi, A.; Gori, F. 2015: Numerical Simulation of Blood Flow through Different Stents in Stenosed and Non-Stenosed Vessels. Numerical Heat Transfer, Part A: Applications 68(3): 225-242
Zang, J.B.; Cai, M.W.; Gao, N.P. 2011: Numerical Simulation of Body Heat Transfer Coefficient Test of a Railway Vehicle. Advanced Materials Research 291-294: 1713-1721
Nichols, B.D.; Hirt, C.W. 1980: Numerical Simulation of Boiling Water Reactor Vent-Clearing Hydrodynamics. Nuclear Science and Engineering 73(2): 196-209
Yu, H.; Kong, L.G.; Niu, Z.Y.; Zhu, S.T.; Jing, D.Y. 2013: Numerical Simulation of Bolt-Mesh-Anchor Support Technology at Soft Rock Roadway. Advanced Materials Research 868: 251-254
Zhu, Y.; Zhou, Y.; Zhu, H. 2010: Numerical Simulation of Bolted-Steel Plates Strengthened Coupling Beams. Advanced Materials Research 163-167: 3677-3681
Zhao, Z.; Ji, A.; Chen, C. 2021: Numerical Simulation of Bone Plate with Fatigue Crack and Investigation of Attraction Hole for Retarding Crack Growth. Molecular-Cellular Biomechanics 18(4): 173-185
Qu, C.; Yuan, H. 2020: Numerical Simulation of Bone Remodeling Coupling the Damage Repair Process in Human Proximal Femur. Computer Modeling in Engineering-Sciences 125(2): 829-847
Wang, J.; Liu, X.Q.; Xie, X.C.; Qi, H.J. 2014: Numerical Simulation of Bored Pile on Foundation Pit Support in Soft Soil Deposits. Advanced Materials Research 884-885: 679-684
Harizi, A.; Gahmousse, A.; Mahfoudi, E.; Mameri, A. 2017: Numerical Simulation of Boundary Layer Transition for Turbine Blade Heat Transfer Prediction. Heat Transfer Research 48(10): 877-891
Tang, J.Q.; Hou, Y.T.; Zhang, C.; Hao, J. 2013: Numerical Simulation of Breaking Arch Evolution Rule of Coal Seams Mining. Advanced Materials Research 734-737: 777-780
Weng, C.; Chang, P.; Chen, T. 2014: Numerical Simulation of Broadband Bi-negative Elastic Metamaterials and Wave Transmission Properties. Procedia Engineering 79: 622-630
Patel, D.; Chaudhari, A.; Laari, A.; Heiliö, M.; Hämäläinen, J.; Agrawal, K. 2016: Numerical Simulation of Bubble Coalescence and Break-Up in Multinozzle Jet Ejector. Journal of Applied Mathematics 2016: 1-19
Xu, L.; Yuan, B.; Ni, H.; Chen, C. 2013: Numerical Simulation of Bubble Column Flows in Churn-Turbulent Regime: Comparison of Bubble Size Models. Industrial-Engineering Chemistry Research 52(20): 6794-6802
Dong, B.; Zhang, Y.; Zhou, X.; Chen, C.; Li, W. 2021: Numerical Simulation of Bubble Dynamics in Subcooled Boiling Along Inclined Structured Surface. Journal of Thermophysics and Heat Transfer 35(1): 16-27
Wang, T.; Li, H.; Zhang, Y.; Shi, D. 2015: Numerical Simulation of Bubble Dynamics in a Uniform Electric Field by the Adaptive 3D-VOSET Method. Numerical Heat Transfer, Part A: Applications 67(12): 1352-1369
Chahine, G.L. 2009: Numerical Simulation of Bubble Flow Interactions. Journal of Hydrodynamics 21(3): 316-332
Li, P.; Fan, M.; Sun, L.; Zhang, Y.; Yu, H.; Xu, J. 2019: Numerical Simulation of Bubble Formation in a Co-Flowing Liquid in Microfluidic Chip. Microgravity Science and Technology 32(1): 1-9
Paruya, S.; Bhati, J. 2021: Numerical Simulation of Bubble Growth and Collapse in Pool Boiling: Effect of Bubble Motion. Heat Transfer Research 52(18): 57-76
Anderl, D.; Bauer, M.; Rauh, C.; Rüde, U.; Delgado, A. 2014: Numerical Simulation of Bubbles in Shear Flow. PAMM 14(1): 667-668
Zhou, Y.; Zhao, C.; Ji, B.; Bo, H. 2021: Numerical Simulation of Bubbly Flow Using Partially Averaged Navier–Stokes Simulation and a Path Oscillation Model in the Euler–Lagrange Approach. Industrial-Engineering Chemistry Research 60(10): 4120-4130
Ma, J.; Zhao, J.; Zhao, Y.L. 2012: Numerical Simulation of Building Strength when Foundation Subsides Unevenly. Advanced Materials Research 588-589: 2069-2073
Calvente, J.J.; Andreu, R.; Roldan, E.; Dominguez, M. 1995: Numerical Simulation of Bulk Electrolysis in the Presence of Homogeneous Following Reactions. The Journal of Physical Chemistry 99(25): 10365-10372
Liu, H.; Xing, Z. 2009: Numerical Simulation of Bulk Metal Forming by Meshless Method. International Journal of Modern Physics B 23(06n 07): 1615-1620
Li, H.Q.; Yang, Y.S.; Tong, W.H.; Wang, Z.Y. 2006: Numerical Simulation of Bulk Metallic Glass Preparation Process with Suction Casting. Materials Technology 21(1): 44-47
Nian, X.Z.; Zhang, Y. 2013: Numerical Simulation of Buried Structure Response to Strong Dynamic Load. Advanced Materials Research 671-674: 1535-1538
Jia, L.; Liu, S.; Huang, Y.S.; Wang, N.; Wang, F.Z.; Li, Z.H. 2012: Numerical Simulation of Burner for Micro Gas Turbine. Advanced Materials Research 569: 51-55
Li, H.; Zhang, J.C.; Huang, P.H.; Liu, K.Y. 2013: Numerical Simulation of Bus Windshield Based on Heat Transfer with Impinging Jets. Advanced Materials Research 774-776: 284-289
Dong, L.L.; Zhao, W.L.; Wang, J.R.; Geng, Z.J. 2014: Numerical Simulation of C1 Cyclone in a 5000t/d Cement Clinker Production System. Advanced Materials Research 997: 762-765
Elbar, M.; Tobbeche, S. 2015: Numerical Simulation of CGS/CIGS Single and Tandem Thin-film Solar Cells using the Silvaco-Atlas Software. Energy Procedia 74: 1220-1227
Sun, L.; Luo, K.; Fan, J. 2017: Numerical Simulation of CO Methanation for the Production of Synthetic Natural Gas in a Fluidized Bed Reactor. Energy-Fuels 31(9): 10267-10273
Zhang, L.; Yin, Y.; Li, L.; Wang, F.; Song, Q.; Zhao, N.; Xiao, F.; Wei, W. 2016: Numerical Simulation of CO2 Adsorption on K-Based Sorbent. Energy-Fuels 30(5): 4283-4291
Wareing, C.J.; Fairweather, M.; Woolley, R.M.; Falle, S.A. 2014: Numerical Simulation of CO2 Dispersion from Punctures and Ruptures of Buried High-pressure Dense Phase CO2 Pipelines with Experimental Validation. Energy Procedia 63: 2500-2509
Or, C.; Sasaki, K.; Sugai, Y.; Nakano, M.; Imai, M. 2014: Numerical Simulation of CO2 Gas Microbubble of Foamy Oil. Energy Procedia 63: 7821-7829
Raziperchikolaee, S.; Mishra, S. 2019: Numerical Simulation of CO2 Huff and Puff Feasibility for Light Oil Reservoirs in the Appalachian Basin: Sensitivity Study and History Match of a CO2 Pilot Test. Energy-Fuels 33(11): 10795-10811
Nakajima, T.; Xue, Z.; Chiyonobu, S.; Azuma, H. 2014: Numerical Simulation of CO2 Leakage Along Fault System for the Assessment of Environmental Impacts at CCS Site. Energy Procedia 63: 3234-3241
Pawar, R.J.; Watson, T.L.; Gable, C.W. 2009: Numerical Simulation of CO2 Leakage through Abandoned Wells: Model for an Abandoned Site with Observed Gas Migration in Alberta, Canada. Energy Procedia 1(1): 3625-3632
Shuai, G.W.; Li, Y.; Fang, P. 2013: Numerical Simulation of CO2 Welding 409 Stainless Steel Multi-Crossed Parts. Advanced Materials Research 785-786: 989-992
Wang, Y.; Yang, L.Q. 2014: Numerical Simulation of CSG Concrete Compressive Strength(I). Advanced Materials Research 1065-1069: 1795-1798
Yang, L.Q.; Wang, Y. 2014: Numerical Simulation of CSG Concrete Compressive Strength(II). Advanced Materials Research 1065-1069: 1799-1803
El Otmani, R.; El Manouni, A.; Al Maggoussi, A. 2021: Numerical Simulation of CZTSe Based Solar Cells Using Different Back Surface Field Layers: Improvement and Comparison. Journal of Electronic Materials 50(4): 2021-2033
Liu, R.C.; Tang, Z.H.; Qi, W.Y. 2010: Numerical Simulation of Campus Wind Environment. Advanced Materials Research 160-162: 280-286
Li, J.; Zhang, J. 2011: Numerical Simulation of Canned Hot-Extrusion Process of Mo Powder. Advanced Materials Research 295-297: 1341-1346
Matveev, I.B.; Serbin, S.I. 2021: Numerical Simulation of Carbon Black Plasma Synthesis from Wood Sawdust. IEEE Transactions on Plasma Science 49(3): 978-983
Chen, R.; Zhao, S.; Luo, Z.; Wu, G.; Zhang, Z.; Sun, Y.; Yan, H. 2019: Numerical Simulation of Carbonation of Steel Slag in Fluidized Bed. Science of Advanced Materials 11(5): 672-679
Steinkemper, H.; Feldmann, F.; Bivour, M.; Hermle, M. 2015: Numerical Simulation of Carrier-Selective Electron Contacts Featuring Tunnel Oxides. IEEE Journal of Photovoltaics 5(5): 1348-1356
Wang, A.; Chen, Y.; Tian, H.; Xie, J.; Wang, W. 2019: Numerical Simulation of Cast-rolling Process for Copper-Aluminum Composite Plate. Procedia Manufacturing 37: 105-110
Yuwen, X.; Chen, L.; Han, Y. 2012: Numerical Simulation of Casting Filling Process Based on FLUENT. Energy Procedia 17: 1864-1871
Li, H.P.; Liang, C.Y.; Wang, L.H.; Wang, H.S. 2011: Numerical Simulation of Casting Process for Gray Iron Butterfly Valve. Advanced Materials Research 189-193: 260-264
Wang, P.W.; Du, Y.; Shen, W.D.; Liang, J.J.; Xu, J.F. 2013: Numerical Simulation of Catalytic Combustion Based on Different Catalyst Structures. Advanced Materials Research 791-793: 311-314
Wang, Z.L.; Xie, B.C.; Wang, Y.K.; Zhao, W.S. 2012: Numerical Simulation of Cathode Erosion in EDM Process. Advanced Materials Research 462: 109-115
Guo, Y.; Hu, A.K.; Dong, H.T. 2012: Numerical Simulation of Cathodic Protection System. Advanced Materials Research 548: 682-685
Hu, A.K.; Guo, Y.; Wang, W.; Jiang, W. 2013: Numerical Simulation of Cathodic Protection for Jack-Up Platform. Advanced Materials Research 813: 24-29
Yuan, W.; Schnerr, G.H. 2001: Numerical Simulation of Cavitating Flow in Injector Nozzles. ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik 81(S 3): 581-582
Cai, J.Y.; Chen, H.J. 2013: Numerical Simulation of Cavity Flow within the Flow Field. Advanced Materials Research 712-715: 1259-1262
Wang, J.Z.; Guan, Q.J. 2013: Numerical Simulation of Cell Growth Pattern and Determination of Fractal Dimension of Cell Cluster. Advanced Materials Research 690-693: 1229-1233
Guan, B.W.; Chen, S.F.; Sheng, Y.P.; Xiong, R. 2012: Numerical Simulation of Cement Concrete Under Corrosion Fatigue. Advanced Materials Research 430-432: 177-180
Xu, B.; He, L.; Wang, M.; Tan, S.; Yu, H.; Turng, L. 2016: Numerical Simulation of Chaotic Mixing in Single Screw Extruders with Different Baffle Heights. International Polymer Processing 31(1): 108-118
Aklouche-Benouaguef, S.; Zeghmati, B.; Bouhadef, K. 2013: Numerical Simulation of Chaotic Natural Convection in a Differentiated Closed Square Cavity. Numerical Heat Transfer, Part A: Applications 65(3): 229-246
Li, G.N. 2011: Numerical Simulation of Characteristics of Cross-Flow Heat Transfer in Pulsating Flow. Advanced Materials Research 187: 242-246
Ai, W.Z.; Huang, B.G. 2011: Numerical Simulation of Characteristics of Sudden Reduction Tube Flow Based on FLUENT. Advanced Materials Research 255-260: 3461-3465
Samokhin, A.; Gavrikov, A.; Kuzmichev, S.; Timirkhanov, R.; Vorona, N.; Smirnov, V.; Usmanov, R. 2019: Numerical Simulation of Characteristics of Uranium and Fission Products Ion Fluxes in the Process of Plasma Separation. IEEE Transactions on Plasma Science 47(3): 1546-1552
Rusalov, M.V. 2005: Numerical Simulation of Chemical Equilibria and Photostationary States Using Spectrophotometric and Spectrofluorometric Data. Russian Journal of General Chemistry 75(3): 351-358
Bianchi, D.; Neri, A. 2018: Numerical Simulation of Chemical Erosion in Vega Solid-Rocket-Motor Nozzles. Journal of Propulsion and Power 34(2): 482-498
Zhang, B.; Yu, B.; Liu, H.; Chen, F. 2013: Numerical Simulation of Chemical Non-Equilibrium Flow in Hydrocarbon Fuel Scramjet Nozzle. Advanced Materials Research 717: 342-346
Su, Y.; Li, J.; Wang, H.; Xu, A. 2021: Numerical Simulation of Chemical Reactions on Rarefied Plasma Plume by DSMC Method. IEEE Transactions on Plasma Science 49(3): 1214-1226
Luo, S.; Jun, M.B.; Dong, Z. 2016: Numerical Simulation of Chip Ploughing Volume and Forces in 5-axis CNC Micro-milling Using Flat-end Mills. Procedia Manufacturing 5: 348-361
Lin, B.; Guiochon, G. 1989: Numerical Simulation of Chromatographic Band Profiles at Large Concentrations: Length of Space Increment and Height Equivalent to a Theoretical Plate. Separation Science and Technology 24(1-2): 31-40
Yang, H.Y.; He, X.C.; Zeng, K.; Ding, Y.F. 2013: Numerical Simulation of Clinching Process in Copper Alloy Sheets. Advanced Materials Research 753-755: 439-442
Zhu, J.; Kao, H. 2021: Numerical Simulation of Co-Combustion of Pulverized Coal and Different Proportions of Refused Derived Fuel in TTF Precalciner. Journal of Renewable Materials 9(7): 1329-1343