First measurements of current distribution in moving fiber-armatures in railguns
Wey, J.; Lehmann, P.; Charon, R.; Eckenfels, D.; Gauthier, C.
Ieee Trans. Magn 35(1): 107-111
1999
ISSN/ISBN: 0018-9464 Accession: 075484789
Full-Text Article emailed within 1 workday
Payments are secure & encrypted
References
Marshall, R.A. 1997: Current carrying capacity of solid armatures for railguns at zero speed IEEE Transactions on Magnetics 33(1 PART 1): 125-128Kareev, Y.; Zayatdinov, R. 1995: Transition conditions for solid armatures in railguns with muzzle current feed IEEE Transactions on Magnetics 31(1): 180-182
Wild, B.; Alouahabi, F.; Schneider, M. 2019: In Situ Current Distribution Measurements in C-Shaped Armatures IEEE Transactions on Plasma Science 47(9): 4409-4414
Ferrero, R.; Marracci, M.; Tellini, B. 2013: Current distribution measurements in rail launcher multibrush armatures during launch IEEE Transactions on Instrumentation and Measurement 62(5): 1138-1144
Nie, J.; Jiao, Q.; Li, J.; Gui, Y.; Marshall, R.A. 2011: Plasma Armatures for Railguns IEEE Transactions on Plasma Science 39(1): 452-455
Long, G.; Weldon, W. 1989: Limits to the velocity of solid armatures in railguns IEEE Transactions on Magnetics 25(1): 347-352
Thornhill, L.D.; Batteh, J.H. 1993: Scaling laws for plasma armatures in railguns IEEE Transactions on Plasma Science 21(3): 289-297
Barber, J.; Challita, A.; Maas, B.; Thurmond, L. 1991: Contact transition in metal armatures (railguns) IEEE Transactions on Magnetics 27(1): 228-232
Thornhill, L.D.; Batteh, J.H. 1993: Scaling Laws for Plasma Armatures in Railguns IEEE Transactions on Plasma Science 21(3): 289-297
Powell, J.D. 1989: Modeling of plasma armatures in electromagnetic railguns Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms 40-41: 1080-1083
Chen, L.; Zhang, W.; Li, L.; Xu, S. 2024: General Description of Solid Armatures in Electromagnetic Railguns Proceedings of the 2024 10th Euro-Asian Pulsed Power Conference, 25th International Conference on High-Power Particle Beams and 20th International Symposium on Electromagnetic Launch Technology, EAPPC-BEAMS-EML 2024
Barber, J.; Marshall, R. 1991: Observations on the limit velocity of plasma armatures (for railguns) IEEE Transactions on Magnetics 27(1): 323-325
Barber, J.; Marshall, R. 1989: The velocity skin effect on plasma armatures in railguns IEEE Transactions on Plasma Science 17(3): 450-454
Stefani, F.; Parker, J. 1999: Experiments to measure wear in aluminum armatures [in railguns] IEEE Transactions on Magnetics 35(1): 100-106
Price, J.; Fulcher, C.; Ingram, M.; Perkins, D.; Peterson, D.; Zowarka, R.; Pappas, J. 1989: Design and testing of solid armatures for large-bore railguns IEEE Transactions on Magnetics 25(1): 467-473
Feng, D.; He, J.; Chen, L.; Xia, S.; Xiao, Z.; Tang, L.; Li, J.; Yan, P. 2013: Simulations on Arc Surfaced C-Shaped Armatures for Round-Like Bore Railguns IEEE Transactions on Plasma Science 41(5): 1467-1474
Huerta, M.; Boynton, G. 1991: Two-dimensional heat conducting simulation of plasma armatures (for railguns) IEEE Transactions on Magnetics 27(1): 261-265
Shvetsov, G.A.; Stankevich, S.V. 2011: Three-Dimensional Numerical Simulation of the Joule Heating of Various Shapes of Armatures in Railguns IEEE Transactions on Plasma Science 39(1): 456-460
Hawke, R.; Pincosy, P. 1993: Numerical simulations of plasma brush behavior in hybrid armatures (railguns) IEEE Transactions on Magnetics 29(1): 810-813
Karthaus, W.; Huijser, T.; Kolkert, W.J. 1999: Influence of the armature-rail geometry on results of launch experiments of fibre armatures with railguns IEEE Transactions on Magnetics 35(1 PART 1): 68-73