Top Buy Now Summary References
Home
>
Section
>
Chapter

Study on High-Temperature Mechanical Properties of SPHC Steel Produced by CSP Technology

Peng, Q.C.; Wang, J.J.; Tong, Z.B.

Advanced Materials Research 1095: 188-192

2015

ISSN/ISBN: 1662-8985
DOI: 10.4028/www.scientific.net/amr.1095.188
Accession: 087968741

Full-Text Article emailed within 0-6 h
Payments are secure & encrypted
Powered by Stripe
Powered by PayPal

Summary
The high-temperature mechanical properties of SPHC steel produced by compact strip production (CSP) process were tested on Gleeble thermal simulator under different temperature conditions. The results show that: at the strain rate of 1×10 -3 s -1 ,the SPHC steel has three brittleness temperature zones within the range from 650°C to 1200°C;the percentage reduction of area of the tested steel are all above 60% within the range from 950°C to 1150°C,thus the steel has good high temperature plasticity; the percentage reduction of area decreases rapidly when the testing temperature is under 900°C and the minimum percentage reduction of area is only about 41.78% at 800°C.

References

Zhao, Z.; Kang, Y.L.; Yu, H.; Gu, H. 2005: Mechanical properties and strengthening mechanism of high-strength low-carbon automobile steel plates produced by CSP technology Beijing Keji Daxue Xuebao/Journal of University of Science and Technology Beijing 27(2): 227-231
Dong, Y.; Zhang, Z.; Yang, Z.; Zheng, R.; Chen, X. 2021: Effect of Annealing Temperature on the Microstructure and Mechanical Properties of High-Pressure Torsion-Produced 316LN Stainless Steel Materials 15(1)
Liu, C.; Li, J.; Gao, X.; Yang, S. 2015: Investigation on cleanliness of SPHC steel produced by BOF-LF-CC process Kang T'ieh/Iron and Steel 50(2): 27-80
Yang, Z.; Zou, M.; Ma, M. 2013: Evolution of non-metallic inclusions in SPHC steel produced by BOF-LF-CSP process Journal of Iron and Steel Research 25(3): 23-53
Rozmus, M.; Blicharski, M.; Dymek, S. 2010: Microstructure and mechanical properties of Nb15Al10Ti alloy produced by mechanical alloying and high temperature processing Journal of Microscopy 237(3): 501-505
Hong, S.C. 2007: Mechanical properties of high-Si plate steel produced by the quenching and partitioning process Metals and Materials International 13(6): 439-445
Pengzhao, S.; Jiangbo, L.; Jialong, Q.; Feihu, G.; Shengtao, Q. 2023: High temperature mechanical properties and hot working properties of high magnetic orientation silicon steel Iron Steel Vanadium Titanium 44(4): 135-141
Klimova, M.V.; Nasonovskiy, K.; Astakhov, I.; Fedoseeva, A.E.; Korsmik, R.S.; Mukin, D.; Zherebtsov, S.V.; Stepanov, N.D. 2025: Microstructure and mechanical properties of low-carbon steel produced by WAAM with high deposition rate Materials Science and Engineering: A 947: 149185
Li, Y.; Wang, Y.; Niu, J.; Liu, S.; Lin, Y.; Liu, N.; Ma, J.; Zhang, Z.; Wang, J. 2023: Microstructure and mechanical properties of M2 high speed steel produced by electron beam melting Materials Science and Engineering: A 862: 144327
Tomita, Y. 1991: Low-temperature improvement of mechanical properties of AISI 4340 steel through high-temperature thermomechanical treatment Metallurgical Transactions. A, Physical Metallurgy and Materials Science 22(5): 1093-1102
Hua, H.O.U.; Haifeng, L.I.; Yuchun, J.I.N.; Xinran, W.A.N.G.; Zhiqin, W.E.N. 2014: Effect of heat treatment temperature on the mechanical properties of low-temperature high strength maraging steel Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing 601: 1-6
Cheng, D.-D.; Xiong, Y.; Ma, Y.-F.; Wu, Y.-L.; Ren, F.-Z. 2022: Effect of solution temperature on microstructure and high temperature mechanical properties of 316LN austenitic stainless steel Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment 43(1): 113-120
Liqing, C.H.E.N.; Zhouyu, Z.E.N.G.; Yang, Z.H.A.O.; Fuxian, Z.H.U.; Xianghua, L.I.U. 2014: Microstructures and High-Temperature Mechanical Properties of a Martensitic Heat-Resistant Stainless Steel 403Nb Processed by Thermo-Mechanical Treatment Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science 45(3): 1498-1507
Chen, L.; Zeng, Z.; Zhao, Y.; Zhu, F.; Liu, X. 2013: Microstructures and High-Temperature Mechanical Properties of a Martensitic Heat-Resistant Stainless Steel 403Nb Processed by Thermo-Mechanical Treatment Metallurgical and Materials Transactions A 45(3): 1498-1507
Li, X.-Y.; Zhang, Z.-H.; Liu, L.-J.; Xu, Y.; Jia, Z.-H.; Wang, X.-F.; Wang, D.; Wang, L. 2022: Structure Transformations and Mechanical Properties of the Ultra-High-Strength M54 Steel Produced by Spark Plasma Sintering Powder Metallurgy and Metal Ceramics 61(1-2): 40-49
Jing, G.; Huang, W.; Yang, H.; Wang, Z. 2020: Microstructural evolution and mechanical properties of 300M steel produced by low and high power selective laser melting Journal of Materials Science-Technology 48: 44-56
Zhao, J.; Lv, B.; Zhang, F.; Yang, Z.; Qian, L.; Chen, C.; Long, X. 2019: Effects of austempering temperature on bainitic microstructure and mechanical properties of a high-C high-Si steel Materials Science and Engineering: A742: 179-189
Wang, Y.; Zheng, H.; Bai, Q.; Song, L.; Hu, J.; Huang, B. 2022: High temperature mechanical properties of Mn18Cr18N high nitrogen austenitic stainless steel Jinshu Rechuli/Heat Treatment of Metals 47(1): 172-177
Shinno, H.; Shiraishi, H.; Watanabe, R.; Kamitsubo, H.; Kohno, I.; Shikata, T. 1981: Effect of injection temperature, 5% pre-strain and long time aging on the high-temperature mechanical properties of helium injected 316 stainless steel Journal of Nuclear Materials 97(3): 291-299
Qiang, B.; Lei, D.; Yang, H.; Xu, D.; Huang, J.; Wang, L.; Li, Y. 2025: Experimental investigation of high-temperature mechanical and creep properties of high-strength steel Q500qE Journal of Constructional Steel Research 234: 109732